--- /dev/null
+/*
+ * SBE 2T3E3 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * This code is based on a driver written by SBE Inc.
+ */
+
+#ifndef T3E3_H
+#define T3E3_H
+
+#include <linux/hdlc.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include "ctrl.h"
+
+/**************************************************************
+ * 21143
+ **************************************************************/
+
+/* CSR */
+#define SBE_2T3E3_21143_REG_BUS_MODE 0
+#define SBE_2T3E3_21143_REG_TRANSMIT_POLL_DEMAND 1
+#define SBE_2T3E3_21143_REG_RECEIVE_POLL_DEMAND 2
+#define SBE_2T3E3_21143_REG_RECEIVE_LIST_BASE_ADDRESS 3
+#define SBE_2T3E3_21143_REG_TRANSMIT_LIST_BASE_ADDRESS 4
+#define SBE_2T3E3_21143_REG_STATUS 5
+#define SBE_2T3E3_21143_REG_OPERATION_MODE 6
+#define SBE_2T3E3_21143_REG_INTERRUPT_ENABLE 7
+#define SBE_2T3E3_21143_REG_MISSED_FRAMES_AND_OVERFLOW_COUNTER 8
+#define SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT 9
+#define SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS 10
+#define SBE_2T3E3_21143_REG_GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL 11
+#define SBE_2T3E3_21143_REG_SIA_STATUS 12
+#define SBE_2T3E3_21143_REG_SIA_CONNECTIVITY 13
+#define SBE_2T3E3_21143_REG_SIA_TRANSMIT_AND_RECEIVE 14
+#define SBE_2T3E3_21143_REG_SIA_AND_GENERAL_PURPOSE_PORT 15
+#define SBE_2T3E3_21143_REG_MAX 16
+
+/* CSR0 - BUS_MODE */
+#define SBE_2T3E3_21143_VAL_WRITE_AND_INVALIDATE_ENABLE 0x01000000
+#define SBE_2T3E3_21143_VAL_READ_LINE_ENABLE 0x00800000
+#define SBE_2T3E3_21143_VAL_READ_MULTIPLE_ENABLE 0x00200000
+#define SBE_2T3E3_21143_VAL_TRANSMIT_AUTOMATIC_POLLING_200us 0x00020000
+#define SBE_2T3E3_21143_VAL_TRANSMIT_AUTOMATIC_POLLING_DISABLED 0x00000000
+#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_32 0x0000c000
+#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_16 0x00008000
+#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_8 0x00004000
+#define SBE_2T3E3_21143_VAL_BUS_ARBITRATION_RR 0x00000002
+#define SBE_2T3E3_21143_VAL_SOFTWARE_RESET 0x00000001
+
+/* CSR5 - STATUS */
+#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_PORT_INTERRUPT 0x04000000
+#define SBE_2T3E3_21143_VAL_ERROR_BITS 0x03800000
+#define SBE_2T3E3_21143_VAL_PARITY_ERROR 0x00000000
+#define SBE_2T3E3_21143_VAL_MASTER_ABORT 0x00800000
+#define SBE_2T3E3_21143_VAL_TARGET_ABORT 0x01000000
+#define SBE_2T3E3_21143_VAL_TRANSMISSION_PROCESS_STATE 0x00700000
+#define SBE_2T3E3_21143_VAL_TX_STOPPED 0x00000000
+#define SBE_2T3E3_21143_VAL_TX_SUSPENDED 0x00600000
+#define SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STATE 0x000e0000
+#define SBE_2T3E3_21143_VAL_RX_STOPPED 0x00000000
+#define SBE_2T3E3_21143_VAL_RX_SUSPENDED 0x000a0000
+#define SBE_2T3E3_21143_VAL_NORMAL_INTERRUPT_SUMMARY 0x00010000
+#define SBE_2T3E3_21143_VAL_ABNORMAL_INTERRUPT_SUMMARY 0x00008000
+#define SBE_2T3E3_21143_VAL_EARLY_RECEIVE_INTERRUPT 0x00004000
+#define SBE_2T3E3_21143_VAL_FATAL_BUS_ERROR 0x00002000
+#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_TIMER_EXPIRED 0x00000800
+#define SBE_2T3E3_21143_VAL_EARLY_TRANSMIT_INTERRUPT 0x00000400
+#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_TIMEOUT 0x00000200
+#define SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED 0x00000100
+#define SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE 0x00000080
+#define SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT 0x00000040
+#define SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW 0x00000020
+#define SBE_2T3E3_21143_VAL_TRANSMIT_JABBER_TIMEOUT 0x00000008
+#define SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE 0x00000004
+#define SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED 0x00000002
+#define SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT 0x00000001
+
+/* CSR6 - OPERATION_MODE */
+#define SBE_2T3E3_21143_VAL_SPECIAL_CAPTURE_EFFECT_ENABLE 0x80000000
+#define SBE_2T3E3_21143_VAL_RECEIVE_ALL 0x40000000
+#define SBE_2T3E3_21143_VAL_MUST_BE_ONE 0x02000000
+#define SBE_2T3E3_21143_VAL_SCRAMBLER_MODE 0x01000000
+#define SBE_2T3E3_21143_VAL_PCS_FUNCTION 0x00800000
+#define SBE_2T3E3_21143_VAL_TRANSMIT_THRESHOLD_MODE_10Mbs 0x00400000
+#define SBE_2T3E3_21143_VAL_TRANSMIT_THRESHOLD_MODE_100Mbs 0x00000000
+#define SBE_2T3E3_21143_VAL_STORE_AND_FORWARD 0x00200000
+#define SBE_2T3E3_21143_VAL_HEARTBEAT_DISABLE 0x00080000
+#define SBE_2T3E3_21143_VAL_PORT_SELECT 0x00040000
+#define SBE_2T3E3_21143_VAL_CAPTURE_EFFECT_ENABLE 0x00020000
+#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS 0x0000c000
+#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_1 0x00000000
+#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2 0x00004000
+#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3 0x00008000
+#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4 0x0000c000
+#define SBE_2T3E3_21143_VAL_TRANSMISSION_START 0x00002000
+#define SBE_2T3E3_21143_VAL_OPERATING_MODE 0x00000c00
+#define SBE_2T3E3_21143_VAL_LOOPBACK_OFF 0x00000000
+#define SBE_2T3E3_21143_VAL_LOOPBACK_EXTERNAL 0x00000800
+#define SBE_2T3E3_21143_VAL_LOOPBACK_INTERNAL 0x00000400
+#define SBE_2T3E3_21143_VAL_FULL_DUPLEX_MODE 0x00000200
+#define SBE_2T3E3_21143_VAL_PASS_ALL_MULTICAST 0x00000080
+#define SBE_2T3E3_21143_VAL_PROMISCUOUS_MODE 0x00000040
+#define SBE_2T3E3_21143_VAL_PASS_BAD_FRAMES 0x00000008
+#define SBE_2T3E3_21143_VAL_RECEIVE_START 0x00000002
+
+/* CSR7 - INTERRUPT_ENABLE */
+#define SBE_2T3E3_21143_VAL_LINK_CHANGED_ENABLE 0x08000000
+#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_PORT_ENABLE 0x04000000
+#define SBE_2T3E3_21143_VAL_NORMAL_INTERRUPT_SUMMARY_ENABLE 0x00010000
+#define SBE_2T3E3_21143_VAL_ABNORMAL_INTERRUPT_SUMMARY_ENABLE 0x00008000
+#define SBE_2T3E3_21143_VAL_EARLY_RECEIVE_INTERRUPT_ENABLE 0x00004000
+#define SBE_2T3E3_21143_VAL_FATAL_BUS_ERROR_ENABLE 0x00002000
+#define SBE_2T3E3_21143_VAL_LINK_FAIL_ENABLE 0x00001000
+#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_TIMER_ENABLE 0x00000800
+#define SBE_2T3E3_21143_VAL_EARLY_TRANSMIT_INTERRUPT_ENABLE 0x00000400
+#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_TIMEOUT_ENABLE 0x00000200
+#define SBE_2T3E3_21143_VAL_RECEIVE_STOPPED_ENABLE 0x00000100
+#define SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE_ENABLE 0x00000080
+#define SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT_ENABLE 0x00000040
+#define SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW_INTERRUPT_ENABLE 0x00000020
+#define SBE_2T3E3_21143_VAL_TRANSMIT_JABBER_TIMEOUT_ENABLE 0x00000008
+#define SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE_ENABLE 0x00000004
+#define SBE_2T3E3_21143_VAL_TRANSMIT_STOPPED_ENABLE 0x00000002
+#define SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT_ENABLE 0x00000001
+
+/* CSR8 - MISSED_FRAMES_AND_OVERFLOW_COUNTER */
+#define SBE_2T3E3_21143_VAL_OVERFLOW_COUNTER_OVERFLOW 0x10000000
+#define SBE_2T3E3_21143_VAL_OVERFLOW_COUNTER 0x0ffe0000
+#define SBE_2T3E3_21143_VAL_MISSED_FRAME_OVERFLOW 0x00010000
+#define SBE_2T3E3_21143_VAL_MISSED_FRAMES_COUNTER 0x0000ffff
+
+/* CSR9 - BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT */
+#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_DATA_IN 0x00080000
+#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_READ_MODE 0x00040000
+#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_DATA_OUT 0x00020000
+#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_CLOCK 0x00010000
+#define SBE_2T3E3_21143_VAL_READ_OPERATION 0x00004000
+#define SBE_2T3E3_21143_VAL_WRITE_OPERATION 0x00002000
+#define SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT 0x00001000
+#define SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT 0x00000800
+#define SBE_2T3E3_21143_VAL_BOOT_ROM_DATA 0x000000ff
+#define SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_OUT 0x00000008
+#define SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_IN 0x00000004
+#define SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK 0x00000002
+#define SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT 0x00000001
+
+/* CSR11 - GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL */
+#define SBE_2T3E3_21143_VAL_CYCLE_SIZE 0x80000000
+#define SBE_2T3E3_21143_VAL_TRANSMIT_TIMER 0x78000000
+#define SBE_2T3E3_21143_VAL_NUMBER_OF_TRANSMIT_PACKETS 0x07000000
+#define SBE_2T3E3_21143_VAL_RECEIVE_TIMER 0x00f00000
+#define SBE_2T3E3_21143_VAL_NUMBER_OF_RECEIVE_PACKETS 0x000e0000
+#define SBE_2T3E3_21143_VAL_CONTINUOUS_MODE 0x00010000
+#define SBE_2T3E3_21143_VAL_TIMER_VALUE 0x0000ffff
+
+/* CSR12 - SIA_STATUS */
+#define SBE_2T3E3_21143_VAL_10BASE_T_RECEIVE_PORT_ACTIVITY 0x00000200
+#define SBE_2T3E3_21143_VAL_AUI_RECEIVE_PORT_ACTIVITY 0x00000100
+#define SBE_2T3E3_21143_VAL_10Mbs_LINK_STATUS 0x00000004
+#define SBE_2T3E3_21143_VAL_100Mbs_LINK_STATUS 0x00000002
+#define SBE_2T3E3_21143_VAL_MII_RECEIVE_PORT_ACTIVITY 0x00000001
+
+/* CSR13 - SIA_CONNECTIVITY */
+#define SBE_2T3E3_21143_VAL_10BASE_T_OR_AUI 0x00000008
+#define SBE_2T3E3_21143_VAL_SIA_RESET 0x00000001
+
+/* CSR14 - SIA_TRANSMIT_AND_RECEIVE */
+#define SBE_2T3E3_21143_VAL_100BASE_TX_FULL_DUPLEX 0x00020000
+#define SBE_2T3E3_21143_VAL_COLLISION_DETECT_ENABLE 0x00000400
+#define SBE_2T3E3_21143_VAL_COLLISION_SQUELCH_ENABLE 0x00000200
+#define SBE_2T3E3_21143_VAL_RECEIVE_SQUELCH_ENABLE 0x00000100
+#define SBE_2T3E3_21143_VAL_LINK_PULSE_SEND_ENABLE 0x00000004
+#define SBE_2T3E3_21143_VAL_ENCODER_ENABLE 0x00000001
+
+/* CSR15 - SIA_AND_GENERAL_PURPOSE_PORT */
+#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_DISABLE 0x00000010
+#define SBE_2T3E3_21143_VAL_AUI_BNC_MODE 0x00000008
+#define SBE_2T3E3_21143_VAL_HOST_UNJAB 0x00000002
+#define SBE_2T3E3_21143_VAL_JABBER_DISABLE 0x00000001
+
+/**************************************************************
+ * CPLD
+ **************************************************************/
+
+/* reg_map indexes */
+#define SBE_2T3E3_CPLD_REG_PCRA 0
+#define SBE_2T3E3_CPLD_REG_PCRB 1
+#define SBE_2T3E3_CPLD_REG_PLCR 2
+#define SBE_2T3E3_CPLD_REG_PLTR 3
+#define SBE_2T3E3_CPLD_REG_PPFR 4
+#define SBE_2T3E3_CPLD_REG_BOARD_ID 5
+#define SBE_2T3E3_CPLD_REG_FPGA_VERSION 6
+#define SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS 7
+#define SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT 8
+#define SBE_2T3E3_CPLD_REG_STATIC_RESET 9
+#define SBE_2T3E3_CPLD_REG_PULSE_RESET 10
+#define SBE_2T3E3_CPLD_REG_FPGA_RECONFIGURATION 11
+#define SBE_2T3E3_CPLD_REG_LEDR 12
+#define SBE_2T3E3_CPLD_REG_PICSR 13
+#define SBE_2T3E3_CPLD_REG_PIER 14
+#define SBE_2T3E3_CPLD_REG_PCRC 15
+#define SBE_2T3E3_CPLD_REG_PBWF 16
+#define SBE_2T3E3_CPLD_REG_PBWL 17
+
+#define SBE_2T3E3_CPLD_REG_MAX 18
+
+/**********/
+
+/* val_map indexes */
+#define SBE_2T3E3_CPLD_VAL_LIU_SELECT 0
+#define SBE_2T3E3_CPLD_VAL_DAC_SELECT 1
+#define SBE_2T3E3_CPLD_VAL_LOOP_TIMING_SOURCE 2
+#define SBE_2T3E3_CPLD_VAL_LIU_FRAMER_RESET 3
+
+/* PCRA */
+#define SBE_2T3E3_CPLD_VAL_CRC32 0x40
+#define SBE_2T3E3_CPLD_VAL_TRANSPARENT_MODE 0x20
+#define SBE_2T3E3_CPLD_VAL_REAR_PANEL 0x10
+#define SBE_2T3E3_CPLD_VAL_RAW_MODE 0x08
+#define SBE_2T3E3_CPLD_VAL_ALT 0x04
+#define SBE_2T3E3_CPLD_VAL_LOOP_TIMING 0x02
+#define SBE_2T3E3_CPLD_VAL_LOCAL_CLOCK_E3 0x01
+
+/* PCRB */
+#define SBE_2T3E3_CPLD_VAL_PAD_COUNT 0x30
+#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_1 0x00
+#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_2 0x10
+#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_3 0x20
+#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_4 0x30
+#define SBE_2T3E3_CPLD_VAL_SCRAMBLER_TYPE 0x02
+#define SBE_2T3E3_CPLD_VAL_SCRAMBLER_ENABLE 0x01
+
+/* PCRC */
+#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_NONE 0x00
+#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_0 0x01
+#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_1 0x11
+#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_2 0x21
+
+/* PLTR */
+#define SBE_2T3E3_CPLD_VAL_LCV_COUNTER 0xff
+
+/* SCSR */
+#define SBE_2T3E3_CPLD_VAL_EEPROM_SELECT 0x10
+
+/* PICSR */
+#define SBE_2T3E3_CPLD_VAL_LOSS_OF_SIGNAL_THRESHOLD_LEVEL_1 0x80
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_CHANGE 0x40
+#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ASSERTED 0x20
+#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ASSERTED 0x10
+#define SBE_2T3E3_CPLD_VAL_LCV_LIMIT_EXCEEDED 0x08
+#define SBE_2T3E3_CPLD_VAL_DMO_SIGNAL_DETECTED 0x04
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_DETECTED 0x02
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_DETECTED 0x01
+
+/* PIER */
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOS_CHANGE_ENABLE 0x40
+#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ENABLE 0x20
+#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ENABLE 0x10
+#define SBE_2T3E3_CPLD_VAL_LCV_INTERRUPT_ENABLE 0x08
+#define SBE_2T3E3_CPLD_VAL_DMO_ENABLE 0x04
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_ENABLE 0x02
+#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_ENABLE 0x01
+
+/**************************************************************
+ * Framer
+ **************************************************************/
+
+/* reg_map indexes */
+/* common */
+#define SBE_2T3E3_FRAMER_REG_OPERATING_MODE 0
+#define SBE_2T3E3_FRAMER_REG_IO_CONTROL 1
+#define SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE 2
+#define SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS 3
+#define SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_MSB 28
+#define SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_LSB 29
+#define SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_MSB 30
+#define SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_LSB 31
+#define SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_MSB 32
+#define SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_LSB 33
+#define SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_MSB 34
+#define SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_LSB 35
+#define SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_MSB 36
+#define SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_LSB 37
+#define SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER 38
+#define SBE_2T3E3_FRAMER_REG_ONE_SECOND_ERROR_STATUS 39
+#define SBE_2T3E3_FRAMER_REG_LCV_ONE_SECOND_ACCUMULATOR_MSB 40
+#define SBE_2T3E3_FRAMER_REG_LCV_ONE_SECOND_ACCUMULATOR_LSB 41
+#define SBE_2T3E3_FRAMER_REG_FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_MSB 42
+#define SBE_2T3E3_FRAMER_REG_FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_LSB 43
+#define SBE_2T3E3_FRAMER_REG_FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_MSB 44
+#define SBE_2T3E3_FRAMER_REG_FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_LSB 45
+#define SBE_2T3E3_FRAMER_REG_LINE_INTERFACE_DRIVE 46
+#define SBE_2T3E3_FRAMER_REG_LINE_INTERFACE_SCAN 47
+
+/* T3 */
+#define SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS 4
+#define SBE_2T3E3_FRAMER_REG_T3_RX_STATUS 5
+#define SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE 6
+#define SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS 7
+#define SBE_2T3E3_FRAMER_REG_T3_RX_SYNC_DETECT_ENABLE 8
+#define SBE_2T3E3_FRAMER_REG_T3_RX_FEAC 10
+#define SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS 11
+#define SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL 12
+#define SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_STATUS 13
+#define SBE_2T3E3_FRAMER_REG_T3_TX_CONFIGURATION 16
+#define SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS 17
+#define SBE_2T3E3_FRAMER_REG_T3_TX_FEAC 18
+#define SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_CONFIGURATION 19
+#define SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS 20
+#define SBE_2T3E3_FRAMER_REG_T3_TX_MBIT_MASK 21
+#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK 22
+#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK_2 23
+#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK_3 24
+
+/* E3 */
+#define SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_1 4
+#define SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2 5
+#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1 6
+#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_2 7
+#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1 8
+#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2 9
+#define SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_CONTROL 12
+#define SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_STATUS 13
+#define SBE_2T3E3_FRAMER_REG_E3_RX_NR_BYTE 14
+#define SBE_2T3E3_FRAMER_REG_E3_RX_SERVICE_BITS 14
+#define SBE_2T3E3_FRAMER_REG_E3_RX_GC_BYTE 15
+#define SBE_2T3E3_FRAMER_REG_E3_TX_CONFIGURATION 16
+#define SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_CONFIGURATION 19
+#define SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS 19
+#define SBE_2T3E3_FRAMER_REG_E3_TX_GC_BYTE 21
+#define SBE_2T3E3_FRAMER_REG_E3_TX_SERVICE_BITS 21
+#define SBE_2T3E3_FRAMER_REG_E3_TX_MA_BYTE 22
+#define SBE_2T3E3_FRAMER_REG_E3_TX_NR_BYTE 23
+#define SBE_2T3E3_FRAMER_REG_E3_TX_FA1_ERROR_MASK 25
+#define SBE_2T3E3_FRAMER_REG_E3_TX_FAS_ERROR_MASK_UPPER 25
+#define SBE_2T3E3_FRAMER_REG_E3_TX_FA2_ERROR_MASK 26
+#define SBE_2T3E3_FRAMER_REG_E3_TX_FAS_ERROR_MASK_LOWER 26
+#define SBE_2T3E3_FRAMER_REG_E3_TX_BIP8_MASK 27
+#define SBE_2T3E3_FRAMER_REG_E3_TX_BIP4_MASK 27
+
+#define SBE_2T3E3_FRAMER_REG_MAX 48
+
+/**********/
+
+/* OPERATING_MODE */
+#define SBE_2T3E3_FRAMER_VAL_LOCAL_LOOPBACK_MODE 0x80
+#define SBE_2T3E3_FRAMER_VAL_T3_E3_SELECT 0x40
+#define SBE_2T3E3_FRAMER_VAL_INTERNAL_LOS_ENABLE 0x20
+#define SBE_2T3E3_FRAMER_VAL_RESET 0x10
+#define SBE_2T3E3_FRAMER_VAL_INTERRUPT_ENABLE_RESET 0x08
+#define SBE_2T3E3_FRAMER_VAL_FRAME_FORMAT_SELECT 0x04
+#define SBE_2T3E3_FRAMER_VAL_TIMING_ASYNCH_TXINCLK 0x03
+#define SBE_2T3E3_FRAMER_VAL_E3_G751 0x00
+#define SBE_2T3E3_FRAMER_VAL_E3_G832 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_CBIT 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_M13 0x44
+#define SBE_2T3E3_FRAMER_VAL_LOOPBACK_ON 0x80
+#define SBE_2T3E3_FRAMER_VAL_LOOPBACK_OFF 0x00
+
+/* IO_CONTROL */
+#define SBE_2T3E3_FRAMER_VAL_DISABLE_TX_LOSS_OF_CLOCK 0x80
+#define SBE_2T3E3_FRAMER_VAL_LOSS_OF_CLOCK_STATUS 0x40
+#define SBE_2T3E3_FRAMER_VAL_DISABLE_RX_LOSS_OF_CLOCK 0x20
+#define SBE_2T3E3_FRAMER_VAL_AMI_LINE_CODE 0x10
+#define SBE_2T3E3_FRAMER_VAL_UNIPOLAR 0x08
+#define SBE_2T3E3_FRAMER_VAL_TX_LINE_CLOCK_INVERT 0x04
+#define SBE_2T3E3_FRAMER_VAL_RX_LINE_CLOCK_INVERT 0x02
+#define SBE_2T3E3_FRAMER_VAL_REFRAME 0x01
+
+/* BLOCK_INTERRUPT_ENABLE */
+#define SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_ENABLE 0x80
+#define SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_ONE_SECOND_INTERRUPT_ENABLE 0x01
+
+/* BLOCK_INTERRUPT_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS 0x80
+#define SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS 0x02
+#define SBE_2T3E3_FRAMER_VAL_ONE_SECOND_INTERRUPT_STATUS 0x01
+
+/**********/
+
+/* T3_RX_CONFIGURATION_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS 0x80
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE 0x20
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FRAMING_ON_PARITY 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_F_SYNC_ALGO 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_M_SYNC_ALGO 0x01
+
+/* T3_RX_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEBE 0x07
+
+/* T3_RX_INTERRUPT_ENABLE */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_ENABLE 0x80
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_ENABLE 0x20
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_ENABLE 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_ENABLE 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_ENABLE 0x01
+
+/* T3_RX_INTERRUPT_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_STATUS 0x80
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_STATUS 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_STATUS 0x20
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_STATUS 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_STATUS 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_STATUS 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_STATUS 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_STATUS 0x01
+
+/* T3_RX_FEAC_INTERRUPT_ENABLE_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_ENABLE 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_STATUS 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_STATUS 0x01
+
+/* T3_RX_LAPD_CONTROL */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_INTERRUPT_STATUS 0x01
+
+/* T3_RX_LAPD_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_ABORT 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_TYPE 0x30
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_CR_TYPE 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FCS_ERROR 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_END_OF_MESSAGE 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_RX_FLAG_PRESENT 0x01
+
+/* T3_TX_CONFIGURATION */
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_YELLOW_ALARM 0x80
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_X_BIT 0x40
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_IDLE 0x20
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_AIS 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_LOS 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_LOS 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_OOF 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_AIS 0x01
+
+/* T3_TX_FEAC_CONFIGURATION_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_INTERRUPT_ENABLE 0x10
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_INTERRUPT_STATUS 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_GO 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_BUSY 0x01
+
+/* T3_TX_LAPD_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_DL_START 0x08
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_DL_BUSY 0x04
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_LAPD_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_T3_TX_LAPD_INTERRUPT_STATUS 0x01
+
+/**********/
+
+/* E3_RX_CONFIGURATION_STATUS_1 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_TYPE 0xe0
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_ALGO 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_T_MARK_ALGO 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_EXPECTED 0x07
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4 0x01
+
+/* E3_RX_CONFIGURATION_STATUS_2 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_ALGO 0x80
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF 0x40
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF 0x20
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_UNSTABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_T_MARK 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF 0x01
+
+/* E3_RX_INTERRUPT_ENABLE_1 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_ENABLE 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_ENABLE 0x01
+
+/* E3_RX_INTERRUPT_ENABLE_2 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_TTB_CHANGE_INTERRUPT_ENABLE 0x40
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_ENABLE 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_ENABLE 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP8_ERROR_INTERRUPT_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4_ERROR_INTERRUPT_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_MISMATCH_INTERRUPT_ENABLE 0x01
+
+/* E3_RX_INTERRUPT_STATUS_1 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_STATUS 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_STATUS 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_STATUS 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_STATUS 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_STATUS 0x01
+
+/* E3_RX_INTERRUPT_STATUS_2 */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_TTB_CHANGE_INTERRUPT_STATUS 0x40
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_STATUS 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_STATUS 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP8_ERROR_INTERRUPT_STATUS 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4_ERROR_INTERRUPT_STATUS 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_STATUS 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_MISMATCH_INTERRUPT_STATUS 0x01
+
+/* E3_RX_LAPD_CONTROL */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_DL_FROM_NR 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_INTERRUPT_STATUS 0x01
+
+/* E3_RX_LAPD_STATUS */
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_ABORT 0x40
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_TYPE 0x30
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_CR_TYPE 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FCS_ERROR 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_END_OF_MESSAGE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_RX_FLAG_PRESENT 0x01
+
+/* E3_TX_CONFIGURATION */
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_BIP4_ENABLE 0x80
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_A_SOURCE_SELECT 0x60
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_IN_NR 0x10
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_N_SOURCE_SELECT 0x18
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_AIS_ENABLE 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_LOS_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_MA_RX 0x01
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_FAS_SOURCE_SELECT 0x01
+
+/* E3_TX_LAPD_CONFIGURATION */
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_AUTO_RETRANSMIT 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_MESSAGE_LENGTH 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_ENABLE 0x01
+
+/* E3_TX_LAPD_STATUS_INTERRUPT */
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_START 0x08
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_BUSY 0x04
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_INTERRUPT_ENABLE 0x02
+#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_INTERRUPT_STATUS 0x01
+
+
+
+
+
+
+/**************************************************************
+ * LIU
+ **************************************************************/
+
+/* reg_map indexes */
+#define SBE_2T3E3_LIU_REG_REG0 0
+#define SBE_2T3E3_LIU_REG_REG1 1
+#define SBE_2T3E3_LIU_REG_REG2 2
+#define SBE_2T3E3_LIU_REG_REG3 3
+#define SBE_2T3E3_LIU_REG_REG4 4
+
+#define SBE_2T3E3_LIU_REG_MAX 5
+
+/**********/
+
+/* REG0 */
+#define SBE_2T3E3_LIU_VAL_RECEIVE_LOSS_OF_LOCK_STATUS 0x10
+#define SBE_2T3E3_LIU_VAL_RECEIVE_LOSS_OF_SIGNAL_STATUS 0x08
+#define SBE_2T3E3_LIU_VAL_ANALOG_LOSS_OF_SIGNAL_STATUS 0x04
+#define SBE_2T3E3_LIU_VAL_DIGITAL_LOSS_OF_SIGNAL_STATUS 0x02
+#define SBE_2T3E3_LIU_VAL_DMO_STATUS 0x01
+
+/* REG1 */
+#define SBE_2T3E3_LIU_VAL_TRANSMITTER_OFF 0x10
+#define SBE_2T3E3_LIU_VAL_TRANSMIT_ALL_ONES 0x08
+#define SBE_2T3E3_LIU_VAL_TRANSMIT_CLOCK_INVERT 0x04
+#define SBE_2T3E3_LIU_VAL_TRANSMIT_LEVEL_SELECT 0x02
+#define SBE_2T3E3_LIU_VAL_TRANSMIT_BINARY_DATA 0x01
+
+/* REG2 */
+#define SBE_2T3E3_LIU_VAL_DECODER_DISABLE 0x10
+#define SBE_2T3E3_LIU_VAL_ENCODER_DISABLE 0x08
+#define SBE_2T3E3_LIU_VAL_ANALOG_LOSS_OF_SIGNAL_DISABLE 0x04
+#define SBE_2T3E3_LIU_VAL_DIGITAL_LOSS_OF_SIGNAL_DISABLE 0x02
+#define SBE_2T3E3_LIU_VAL_RECEIVE_EQUALIZATION_DISABLE 0x01
+
+/* REG3 */
+#define SBE_2T3E3_LIU_VAL_RECEIVE_BINARY_DATA 0x10
+#define SBE_2T3E3_LIU_VAL_RECOVERED_DATA_MUTING 0x08
+#define SBE_2T3E3_LIU_VAL_RECEIVE_CLOCK_OUTPUT_2 0x04
+#define SBE_2T3E3_LIU_VAL_INVERT_RECEIVE_CLOCK_2 0x02
+#define SBE_2T3E3_LIU_VAL_INVERT_RECEIVE_CLOCK_1 0x01
+
+/* REG4 */
+#define SBE_2T3E3_LIU_VAL_T3_MODE_SELECT 0x00
+#define SBE_2T3E3_LIU_VAL_E3_MODE_SELECT 0x04
+#define SBE_2T3E3_LIU_VAL_LOCAL_LOOPBACK 0x02
+#define SBE_2T3E3_LIU_VAL_REMOTE_LOOPBACK 0x01
+#define SBE_2T3E3_LIU_VAL_LOOPBACK_OFF 0x00
+#define SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE 0x01
+#define SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG 0x02
+#define SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL 0x03
+
+/**********************************************************************
+ *
+ * descriptor list and data buffer
+ *
+ **********************************************************************/
+typedef struct {
+ u32 rdes0;
+ u32 rdes1;
+ u32 rdes2;
+ u32 rdes3;
+} t3e3_rx_desc_t;
+
+#define SBE_2T3E3_RX_DESC_RING_SIZE 64
+
+/* RDES0 */
+#define SBE_2T3E3_RX_DESC_21143_OWN 0X80000000
+#define SBE_2T3E3_RX_DESC_FRAME_LENGTH 0x3fff0000
+#define SBE_2T3E3_RX_DESC_FRAME_LENGTH_SHIFT 16
+#define SBE_2T3E3_RX_DESC_ERROR_SUMMARY 0x00008000
+#define SBE_2T3E3_RX_DESC_DESC_ERROR 0x00004000
+#define SBE_2T3E3_RX_DESC_DATA_TYPE 0x00003000
+#define SBE_2T3E3_RX_DESC_RUNT_FRAME 0x00000800
+#define SBE_2T3E3_RX_DESC_FIRST_DESC 0x00000200
+#define SBE_2T3E3_RX_DESC_LAST_DESC 0x00000100
+#define SBE_2T3E3_RX_DESC_FRAME_TOO_LONG 0x00000080
+#define SBE_2T3E3_RX_DESC_COLLISION_SEEN 0x00000040
+#define SBE_2T3E3_RX_DESC_FRAME_TYPE 0x00000020
+#define SBE_2T3E3_RX_DESC_RECEIVE_WATCHDOG 0x00000010
+#define SBE_2T3E3_RX_DESC_MII_ERROR 0x00000008
+#define SBE_2T3E3_RX_DESC_DRIBBLING_BIT 0x00000004
+#define SBE_2T3E3_RX_DESC_CRC_ERROR 0x00000002
+
+/* RDES1 */
+#define SBE_2T3E3_RX_DESC_END_OF_RING 0x02000000
+#define SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED 0x01000000
+#define SBE_2T3E3_RX_DESC_BUFFER_2_SIZE 0x003ff800
+#define SBE_2T3E3_RX_DESC_BUFFER_1_SIZE 0x000007ff
+
+/*********************/
+
+typedef struct {
+ u32 tdes0;
+ u32 tdes1;
+ u32 tdes2;
+ u32 tdes3;
+} t3e3_tx_desc_t;
+
+#define SBE_2T3E3_TX_DESC_RING_SIZE 256
+
+/* TDES0 */
+#define SBE_2T3E3_TX_DESC_21143_OWN 0x80000000
+#define SBE_2T3E3_TX_DESC_ERROR_SUMMARY 0x00008000
+#define SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT 0x00004000
+#define SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER 0x00000800
+#define SBE_2T3E3_TX_DESC_NO_CARRIER 0x00000400
+#define SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT 0x00000004
+#define SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR 0x00000002
+#define SBE_2T3E3_TX_DESC_DEFFERED 0x00000001
+
+/* TDES1 */
+#define SBE_2T3E3_TX_DESC_INTERRUPT_ON_COMPLETION 0x80000000
+#define SBE_2T3E3_TX_DESC_LAST_SEGMENT 0x40000000
+#define SBE_2T3E3_TX_DESC_FIRST_SEGMENT 0x20000000
+#define SBE_2T3E3_TX_DESC_CRC_DISABLE 0x04000000
+#define SBE_2T3E3_TX_DESC_END_OF_RING 0x02000000
+#define SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED 0x01000000
+#define SBE_2T3E3_TX_DESC_DISABLE_PADDING 0x00800000
+#define SBE_2T3E3_TX_DESC_BUFFER_2_SIZE 0x003ff800
+#define SBE_2T3E3_TX_DESC_BUFFER_1_SIZE 0x000007ff
+
+
+#define SBE_2T3E3_MTU 1600
+#define SBE_2T3E3_CRC16_LENGTH 2
+#define SBE_2T3E3_CRC32_LENGTH 4
+
+#define MCLBYTES (SBE_2T3E3_MTU + 128)
+
+struct channel {
+ struct pci_dev *pdev;
+ struct net_device *dev;
+ struct card *card;
+ unsigned long addr; /* DECchip */
+
+ int leds;
+
+ /* pci specific */
+ struct {
+ u32 slot; /* should be 0 or 1 */
+ u32 command;
+ u8 cache_size;
+ } h;
+
+ /* statistics */
+ t3e3_stats_t s;
+
+ /* running */
+ struct {
+ u32 flags;
+ } r;
+
+ /* parameters */
+ t3e3_param_t p;
+
+ u32 liu_regs[SBE_2T3E3_LIU_REG_MAX]; /* LIU registers */
+ u32 framer_regs[SBE_2T3E3_FRAMER_REG_MAX]; /* Framer registers */
+
+ /* Ethernet Controller */
+ struct {
+ u_int16_t card_serial_number[3];
+
+ u32 reg[SBE_2T3E3_21143_REG_MAX]; /* registers i.e. CSR */
+
+ u32 interrupt_enable_mask;
+
+ /* receive chain/ring */
+ t3e3_rx_desc_t *rx_ring;
+ struct sk_buff *rx_data[SBE_2T3E3_RX_DESC_RING_SIZE];
+ u32 rx_ring_current_read;
+
+ /* transmit chain/ring */
+ t3e3_tx_desc_t *tx_ring;
+ struct sk_buff *tx_data[SBE_2T3E3_TX_DESC_RING_SIZE];
+ u32 tx_ring_current_read;
+ u32 tx_ring_current_write;
+ int tx_full;
+ int tx_free_cnt;
+ spinlock_t tx_lock;
+ } ether;
+
+ int32_t interrupt_active;
+ int32_t rcv_count;
+};
+
+struct card {
+ spinlock_t bootrom_lock;
+ unsigned long bootrom_addr;
+ struct timer_list timer; /* for updating LEDs */
+ struct channel channels[0];
+};
+
+#define SBE_2T3E3_FLAG_NETWORK_UP 0x00000001
+#define SBE_2T3E3_FLAG_NO_ERROR_MESSAGES 0x00000002
+
+extern const u32 cpld_reg_map[][2];
+extern const u32 cpld_val_map[][2];
+extern const u32 t3e3_framer_reg_map[];
+extern const u32 t3e3_liu_reg_map[];
+
+void t3e3_init(struct channel *);
+void t3e3_if_up(struct channel *);
+void t3e3_if_down(struct channel *);
+int t3e3_if_start_xmit(struct sk_buff *skb, struct net_device *dev);
+void t3e3_if_config(struct channel *, u32, char *,
+ t3e3_resp_t *, int *);
+void t3e3_set_frame_type(struct channel *, u32);
+u32 t3e3_eeprom_read_word(struct channel *, u32);
+void t3e3_read_card_serial_number(struct channel *);
+
+/* interrupt handlers */
+irqreturn_t t3e3_intr(int irq, void *dev_instance);
+void dc_intr(struct channel *);
+void dc_intr_rx(struct channel *);
+void dc_intr_tx(struct channel *);
+void dc_intr_tx_underflow(struct channel *);
+void exar7250_intr(struct channel *);
+void exar7250_E3_intr(struct channel *, u32);
+void exar7250_T3_intr(struct channel *, u32);
+
+/* Ethernet controller */
+u32 bootrom_read(struct channel *, u32);
+void bootrom_write(struct channel *, u32, u32);
+void dc_init(struct channel *);
+void dc_start(struct channel *);
+void dc_stop(struct channel *);
+void dc_start_intr(struct channel *);
+void dc_stop_intr(struct channel *);
+void dc_reset(struct channel *);
+void dc_restart(struct channel *);
+void dc_receiver_onoff(struct channel *, u32);
+void dc_transmitter_onoff(struct channel *, u32);
+void dc_set_loopback(struct channel *, u32);
+u32 dc_init_descriptor_list(struct channel *);
+void dc_clear_descriptor_list(struct channel *);
+void dc_drop_descriptor_list(struct channel *);
+void dc_set_output_port(struct channel *);
+void t3e3_sc_init(struct channel *);
+
+/* CPLD */
+void cpld_init(struct channel *sc);
+u32 cpld_read(struct channel *sc, u32 reg);
+void cpld_set_crc(struct channel *, u32);
+void cpld_start_intr(struct channel *);
+void cpld_stop_intr(struct channel *);
+#if 0
+void cpld_led_onoff(struct channel *, u32, u32, u32, u32);
+#endif
+void cpld_set_clock(struct channel *sc, u32 mode);
+void cpld_set_scrambler(struct channel *, u32);
+void cpld_select_panel(struct channel *, u32);
+void cpld_set_frame_mode(struct channel *, u32);
+void cpld_set_frame_type(struct channel *, u32);
+void cpld_set_pad_count(struct channel *, u32);
+void cpld_set_fractional_mode(struct channel *, u32, u32, u32);
+void cpld_LOS_update(struct channel *);
+
+/* Framer */
+extern u32 exar7250_read(struct channel *, u32);
+extern void exar7250_write(struct channel *, u32, u32);
+void exar7250_init(struct channel *);
+void exar7250_start_intr(struct channel *, u32);
+void exar7250_stop_intr(struct channel *, u32);
+void exar7250_set_frame_type(struct channel *, u32);
+void exar7250_set_loopback(struct channel *, u32);
+void exar7250_unipolar_onoff(struct channel *, u32);
+
+/* LIU */
+u32 exar7300_read(struct channel *, u32);
+void exar7300_write(struct channel *, u32, u32);
+void exar7300_init(struct channel *);
+void exar7300_line_build_out_onoff(struct channel *, u32);
+void exar7300_set_frame_type(struct channel *, u32);
+void exar7300_set_loopback(struct channel *, u32);
+void exar7300_transmit_all_ones_onoff(struct channel *, u32);
+void exar7300_receive_equalization_onoff(struct channel *, u32);
+void exar7300_unipolar_onoff(struct channel *, u32);
+
+void update_led(struct channel *, int);
+int setup_device(struct net_device *dev, struct channel *sc);
+
+static inline int has_two_ports(struct pci_dev *pdev)
+{
+ return pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0;
+}
+
+#define dev_to_priv(dev) (*(struct channel **) ((hdlc_device*)(dev) + 1))
+
+static inline u32 dc_read(unsigned long addr, u32 reg)
+{
+ return inl(addr + (reg << 3));
+}
+
+static inline void dc_write(unsigned long addr, u32 reg, u32 val)
+{
+ outl(val, addr + (reg << 3));
+}
+
+static inline void dc_set_bits(unsigned long addr, u32 reg, u32 bits)
+{
+ dc_write(addr, reg, dc_read(addr, reg) | bits);
+}
+
+static inline void dc_clear_bits(unsigned long addr, u32 reg, u32 bits)
+{
+ dc_write(addr, reg, dc_read(addr, reg) & ~bits);
+}
+
+#define CPLD_MAP_REG(reg, sc) (cpld_reg_map[(reg)][(sc)->h.slot])
+
+static inline void cpld_write(struct channel *channel, unsigned reg, u32 val)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&channel->card->bootrom_lock, flags);
+ bootrom_write(channel, CPLD_MAP_REG(reg, channel), val);
+ spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
+}
+
+#define exar7250_set_bit(sc, reg, bit) \
+ exar7250_write((sc), (reg), \
+ exar7250_read(sc, reg) | (bit))
+
+#define exar7250_clear_bit(sc, reg, bit) \
+ exar7250_write((sc), (reg), \
+ exar7250_read(sc, reg) & ~(bit))
+
+#define exar7300_set_bit(sc, reg, bit) \
+ exar7300_write((sc), (reg), \
+ exar7300_read(sc, reg) | (bit))
+
+#define exar7300_clear_bit(sc, reg, bit) \
+ exar7300_write((sc), (reg), \
+ exar7300_read(sc, reg) & ~(bit))
+
+
+#endif /* T3E3_H */
projects / mv-sheeva.git / blobdiff