#endif
/* TUSB mapping: "flat" plus ep0 special cases */
-#if defined(CONFIG_USB_TUSB6010)
+#if defined(CONFIG_USB_MUSB_TUSB6010)
#define musb_ep_select(_mbase, _epnum) \
musb_writeb((_mbase), MUSB_INDEX, (_epnum))
#define MUSB_EP_OFFSET MUSB_TUSB_OFFSET
/******************************** TYPES *************************************/
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init: turns on clocks, sets up platform-specific registers, etc
+ * @exit: undoes @init
+ * @set_mode: forcefully changes operating mode
+ * @try_ilde: tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus: forces vbus status
+ */
+struct musb_platform_ops {
+ int (*init)(struct musb *musb);
+ int (*exit)(struct musb *musb);
+
+ void (*enable)(struct musb *musb);
+ void (*disable)(struct musb *musb);
+
+ int (*set_mode)(struct musb *musb, u8 mode);
+ void (*try_idle)(struct musb *musb, unsigned long timeout);
+
+ int (*vbus_status)(struct musb *musb);
+ void (*set_vbus)(struct musb *musb, int on);
+};
+
/*
* struct musb_hw_ep - endpoint hardware (bidirectional)
*
void __iomem *fifo;
void __iomem *regs;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
void __iomem *conf;
#endif
struct dma_channel *tx_channel;
struct dma_channel *rx_channel;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
/* TUSB has "asynchronous" and "synchronous" dma modes */
dma_addr_t fifo_async;
dma_addr_t fifo_sync;
#endif
}
+struct musb_csr_regs {
+ /* FIFO registers */
+ u16 txmaxp, txcsr, rxmaxp, rxcsr;
+ u16 rxfifoadd, txfifoadd;
+ u8 txtype, txinterval, rxtype, rxinterval;
+ u8 rxfifosz, txfifosz;
+ u8 txfunaddr, txhubaddr, txhubport;
+ u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
+ u32 otg_sysconfig, otg_forcestandby;
+#endif
+ u8 power;
+ u16 intrtxe, intrrxe;
+ u8 intrusbe;
+ u16 frame;
+ u8 index, testmode;
+
+ u8 devctl, busctl, misc;
+
+ struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
/*
* struct musb - Driver instance data.
*/
struct musb {
/* device lock */
spinlock_t lock;
- struct clk *clock;
- struct clk *phy_clock;
+
+ const struct musb_platform_ops *ops;
+ struct musb_context_registers context;
+
irqreturn_t (*isr)(int, void *);
struct work_struct irq_work;
u16 hwvers;
struct timer_list otg_timer;
#endif
-
- /* called with IRQs blocked; ON/nonzero implies starting a session,
- * and waiting at least a_wait_vrise_tmout.
- */
- void (*board_set_vbus)(struct musb *, int is_on);
+ struct notifier_block nb;
struct dma_controller *dma_controller;
void __iomem *ctrl_base;
void __iomem *mregs;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
dma_addr_t async;
dma_addr_t sync;
void __iomem *sync_va;
u8 board_mode; /* enum musb_mode */
int (*board_set_power)(int state);
- int (*set_clock)(struct clk *clk, int is_active);
-
u8 min_power; /* vbus for periph, in mA/2 */
bool is_host;
struct usb_gadget_driver *gadget_driver; /* its driver */
#endif
+ /*
+ * FIXME: Remove this flag.
+ *
+ * This is only added to allow Blackfin to work
+ * with current driver. For some unknown reason
+ * Blackfin doesn't work with double buffering
+ * and that's enabled by default.
+ *
+ * We added this flag to forcefully disable double
+ * buffering until we get it working.
+ */
+ unsigned double_buffer_not_ok:1 __deprecated;
+
struct musb_hdrc_config *config;
#ifdef MUSB_CONFIG_PROC_FS
#endif
};
-#ifdef CONFIG_PM
-struct musb_csr_regs {
- /* FIFO registers */
- u16 txmaxp, txcsr, rxmaxp, rxcsr;
- u16 rxfifoadd, txfifoadd;
- u8 txtype, txinterval, rxtype, rxinterval;
- u8 rxfifosz, txfifosz;
- u8 txfunaddr, txhubaddr, txhubport;
- u8 rxfunaddr, rxhubaddr, rxhubport;
-};
-
-struct musb_context_registers {
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
- u32 otg_sysconfig, otg_forcestandby;
-#endif
- u8 power;
- u16 intrtxe, intrrxe;
- u8 intrusbe;
- u16 frame;
- u8 index, testmode;
-
- u8 devctl, busctl, misc;
-
- struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
-};
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_BLACKFIN)
-extern void musb_platform_save_context(struct musb *musb,
- struct musb_context_registers *musb_context);
-extern void musb_platform_restore_context(struct musb *musb,
- struct musb_context_registers *musb_context);
-#else
-#define musb_platform_save_context(m, x) do {} while (0)
-#define musb_platform_restore_context(m, x) do {} while (0)
-#endif
-
-#endif
-
-static inline void musb_set_vbus(struct musb *musb, int is_on)
-{
- musb->board_set_vbus(musb, is_on);
-}
-
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
static inline struct musb *gadget_to_musb(struct usb_gadget *g)
{
extern irqreturn_t musb_interrupt(struct musb *);
-extern void musb_platform_enable(struct musb *musb);
-extern void musb_platform_disable(struct musb *musb);
-
extern void musb_hnp_stop(struct musb *musb);
-extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+ if (musb->ops->set_vbus)
+ musb->ops->set_vbus(musb, is_on);
+}
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
- defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
- defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
- defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
-#else
-#define musb_platform_try_idle(x, y) do {} while (0)
-#endif
+static inline void musb_platform_enable(struct musb *musb)
+{
+ if (musb->ops->enable)
+ musb->ops->enable(musb);
+}
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
-extern int musb_platform_get_vbus_status(struct musb *musb);
-#else
-#define musb_platform_get_vbus_status(x) 0
-#endif
+static inline void musb_platform_disable(struct musb *musb)
+{
+ if (musb->ops->disable)
+ musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+ if (!musb->ops->set_mode)
+ return 0;
+
+ return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+ unsigned long timeout)
+{
+ if (musb->ops->try_idle)
+ musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+ if (!musb->ops->vbus_status)
+ return 0;
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
-extern int musb_platform_exit(struct musb *musb);
+ return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+ if (!musb->ops->init)
+ return -EINVAL;
+
+ return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+ if (!musb->ops->exit)
+ return -EINVAL;
+
+ return musb->ops->exit(musb);
+}
#endif /* __MUSB_CORE_H__ */
projects / mv-sheeva.git / blobdiff