--- /dev/null
+/*
+ * Analog Devices Blackfin(BF537 STAMP) + SHARP TFT LCD.
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:tft-lcd
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ * Licensed under the GPL-2.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dpmc.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define NO_BL 1
+
+#define MAX_BRIGHENESS 95
+#define MIN_BRIGHENESS 5
+#define NBR_PALETTE 256
+
+static const unsigned short ppi_pins[] = {
+ P_PPI0_CLK, P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+ P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+ P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+ P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, 0
+};
+
+static unsigned char *fb_buffer; /* RGB Buffer */
+static unsigned long *dma_desc_table;
+static int t_conf_done, lq035_open_cnt;
+static DEFINE_SPINLOCK(bfin_lq035_lock);
+
+static int landscape;
+module_param(landscape, int, 0);
+MODULE_PARM_DESC(landscape,
+ "LANDSCAPE use 320x240 instead of Native 240x320 Resolution");
+
+static int bgr;
+module_param(bgr, int, 0);
+MODULE_PARM_DESC(bgr,
+ "BGR use 16-bit BGR-565 instead of RGB-565");
+
+static int nocursor = 1;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
+static unsigned long current_brightness; /* backlight */
+
+/* AD5280 vcomm */
+static unsigned char vcomm_value = 150;
+static struct i2c_client *ad5280_client;
+
+static void set_vcomm(void)
+{
+ int nr;
+
+ if (!ad5280_client)
+ return;
+
+ nr = i2c_smbus_write_byte_data(ad5280_client, 0x00, vcomm_value);
+ if (nr)
+ pr_err("i2c_smbus_write_byte_data fail: %d\n", nr);
+}
+
+static int __devinit ad5280_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ ret = i2c_smbus_write_byte_data(client, 0x00, vcomm_value);
+ if (ret) {
+ dev_err(&client->dev, "write fail: %d\n", ret);
+ return ret;
+ }
+
+ ad5280_client = client;
+
+ return 0;
+}
+
+static int __devexit ad5280_remove(struct i2c_client *client)
+{
+ ad5280_client = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id ad5280_id[] = {
+ {"bf537-lq035-ad5280", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad5280_id);
+
+static struct i2c_driver ad5280_driver = {
+ .driver = {
+ .name = "bf537-lq035-ad5280",
+ },
+ .probe = ad5280_probe,
+ .remove = __devexit_p(ad5280_remove),
+ .id_table = ad5280_id,
+};
+
+#ifdef CONFIG_PNAV10
+#define MOD GPIO_PH13
+
+#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER0_CONFIG
+#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER0_WIDTH
+#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER0_PERIOD
+#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER0_COUNTER
+#define TIMDIS_LP TIMDIS0
+#define TIMEN_LP TIMEN0
+
+#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG
+#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH
+#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD
+#define TIMDIS_SPS TIMDIS1
+#define TIMEN_SPS TIMEN1
+
+#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER5_CONFIG
+#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER5_WIDTH
+#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER5_PERIOD
+#define TIMDIS_SP TIMDIS5
+#define TIMEN_SP TIMEN5
+
+#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER2_CONFIG
+#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER2_WIDTH
+#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER2_PERIOD
+#define TIMDIS_PS_CLS TIMDIS2
+#define TIMEN_PS_CLS TIMEN2
+
+#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER3_CONFIG
+#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER3_WIDTH
+#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER3_PERIOD
+#define TIMDIS_REV TIMDIS3
+#define TIMEN_REV TIMEN3
+#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER3_COUNTER
+
+#define FREQ_PPI_CLK (5*1024*1024) /* PPI_CLK 5MHz */
+
+#define TIMERS {P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR5, 0}
+
+#else
+
+#define UD GPIO_PF13 /* Up / Down */
+#define MOD GPIO_PF10
+#define LBR GPIO_PF14 /* Left Right */
+
+#define bfin_write_TIMER_LP_CONFIG bfin_write_TIMER6_CONFIG
+#define bfin_write_TIMER_LP_WIDTH bfin_write_TIMER6_WIDTH
+#define bfin_write_TIMER_LP_PERIOD bfin_write_TIMER6_PERIOD
+#define bfin_read_TIMER_LP_COUNTER bfin_read_TIMER6_COUNTER
+#define TIMDIS_LP TIMDIS6
+#define TIMEN_LP TIMEN6
+
+#define bfin_write_TIMER_SPS_CONFIG bfin_write_TIMER1_CONFIG
+#define bfin_write_TIMER_SPS_WIDTH bfin_write_TIMER1_WIDTH
+#define bfin_write_TIMER_SPS_PERIOD bfin_write_TIMER1_PERIOD
+#define TIMDIS_SPS TIMDIS1
+#define TIMEN_SPS TIMEN1
+
+#define bfin_write_TIMER_SP_CONFIG bfin_write_TIMER0_CONFIG
+#define bfin_write_TIMER_SP_WIDTH bfin_write_TIMER0_WIDTH
+#define bfin_write_TIMER_SP_PERIOD bfin_write_TIMER0_PERIOD
+#define TIMDIS_SP TIMDIS0
+#define TIMEN_SP TIMEN0
+
+#define bfin_write_TIMER_PS_CLS_CONFIG bfin_write_TIMER7_CONFIG
+#define bfin_write_TIMER_PS_CLS_WIDTH bfin_write_TIMER7_WIDTH
+#define bfin_write_TIMER_PS_CLS_PERIOD bfin_write_TIMER7_PERIOD
+#define TIMDIS_PS_CLS TIMDIS7
+#define TIMEN_PS_CLS TIMEN7
+
+#define bfin_write_TIMER_REV_CONFIG bfin_write_TIMER5_CONFIG
+#define bfin_write_TIMER_REV_WIDTH bfin_write_TIMER5_WIDTH
+#define bfin_write_TIMER_REV_PERIOD bfin_write_TIMER5_PERIOD
+#define TIMDIS_REV TIMDIS5
+#define TIMEN_REV TIMEN5
+#define bfin_read_TIMER_REV_COUNTER bfin_read_TIMER5_COUNTER
+
+#define FREQ_PPI_CLK (6*1000*1000) /* PPI_CLK 6MHz */
+#define TIMERS {P_TMR0, P_TMR1, P_TMR5, P_TMR6, P_TMR7, 0}
+
+#endif
+
+#define LCD_X_RES 240 /* Horizontal Resolution */
+#define LCD_Y_RES 320 /* Vertical Resolution */
+
+#define LCD_BBP 16 /* Bit Per Pixel */
+
+/* the LCD and the DMA start counting differently;
+ * since one starts at 0 and the other starts at 1,
+ * we have a difference of 1 between START_LINES
+ * and U_LINES.
+ */
+#define START_LINES 8 /* lines for field flyback or field blanking signal */
+#define U_LINES 9 /* number of undisplayed blanking lines */
+
+#define FRAMES_PER_SEC (60)
+
+#define DCLKS_PER_FRAME (FREQ_PPI_CLK/FRAMES_PER_SEC)
+#define DCLKS_PER_LINE (DCLKS_PER_FRAME/(LCD_Y_RES+U_LINES))
+
+#define PPI_CONFIG_VALUE (PORT_DIR|XFR_TYPE|DLEN_16|POLS)
+#define PPI_DELAY_VALUE (0)
+#define TIMER_CONFIG (PWM_OUT|PERIOD_CNT|TIN_SEL|CLK_SEL)
+
+#define ACTIVE_VIDEO_MEM_OFFSET (LCD_X_RES*START_LINES*(LCD_BBP/8))
+#define ACTIVE_VIDEO_MEM_SIZE (LCD_Y_RES*LCD_X_RES*(LCD_BBP/8))
+#define TOTAL_VIDEO_MEM_SIZE ((LCD_Y_RES+U_LINES)*LCD_X_RES*(LCD_BBP/8))
+#define TOTAL_DMA_DESC_SIZE (2 * sizeof(u32) * (LCD_Y_RES + U_LINES))
+
+static void start_timers(void) /* CHECK with HW */
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ bfin_write_TIMER_ENABLE(TIMEN_REV);
+ SSYNC();
+
+ while (bfin_read_TIMER_REV_COUNTER() <= 11)
+ continue;
+ bfin_write_TIMER_ENABLE(TIMEN_LP);
+ SSYNC();
+
+ while (bfin_read_TIMER_LP_COUNTER() < 3)
+ continue;
+ bfin_write_TIMER_ENABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS);
+ SSYNC();
+ t_conf_done = 1;
+ local_irq_restore(flags);
+}
+
+static void config_timers(void)
+{
+ /* Stop timers */
+ bfin_write_TIMER_DISABLE(TIMDIS_SP|TIMDIS_SPS|TIMDIS_REV|
+ TIMDIS_LP|TIMDIS_PS_CLS);
+ SSYNC();
+
+ /* LP, timer 6 */
+ bfin_write_TIMER_LP_CONFIG(TIMER_CONFIG|PULSE_HI);
+ bfin_write_TIMER_LP_WIDTH(1);
+
+ bfin_write_TIMER_LP_PERIOD(DCLKS_PER_LINE);
+ SSYNC();
+
+ /* SPS, timer 1 */
+ bfin_write_TIMER_SPS_CONFIG(TIMER_CONFIG|PULSE_HI);
+ bfin_write_TIMER_SPS_WIDTH(DCLKS_PER_LINE*2);
+ bfin_write_TIMER_SPS_PERIOD((DCLKS_PER_LINE * (LCD_Y_RES+U_LINES)));
+ SSYNC();
+
+ /* SP, timer 0 */
+ bfin_write_TIMER_SP_CONFIG(TIMER_CONFIG|PULSE_HI);
+ bfin_write_TIMER_SP_WIDTH(1);
+ bfin_write_TIMER_SP_PERIOD(DCLKS_PER_LINE);
+ SSYNC();
+
+ /* PS & CLS, timer 7 */
+ bfin_write_TIMER_PS_CLS_CONFIG(TIMER_CONFIG);
+ bfin_write_TIMER_PS_CLS_WIDTH(LCD_X_RES + START_LINES);
+ bfin_write_TIMER_PS_CLS_PERIOD(DCLKS_PER_LINE);
+
+ SSYNC();
+
+#ifdef NO_BL
+ /* REV, timer 5 */
+ bfin_write_TIMER_REV_CONFIG(TIMER_CONFIG|PULSE_HI);
+
+ bfin_write_TIMER_REV_WIDTH(DCLKS_PER_LINE);
+ bfin_write_TIMER_REV_PERIOD(DCLKS_PER_LINE*2);
+
+ SSYNC();
+#endif
+}
+
+static void config_ppi(void)
+{
+ bfin_write_PPI_DELAY(PPI_DELAY_VALUE);
+ bfin_write_PPI_COUNT(LCD_X_RES-1);
+ /* 0x10 -> PORT_CFG -> 2 or 3 frame syncs */
+ bfin_write_PPI_CONTROL((PPI_CONFIG_VALUE|0x10) & (~POLS));
+}
+
+static int config_dma(void)
+{
+ u32 i;
+
+ if (landscape) {
+
+ for (i = 0; i < U_LINES; ++i) {
+ /* blanking lines point to first line of fb_buffer */
+ dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
+ dma_desc_table[2*i+1] = (unsigned long)fb_buffer;
+ }
+
+ for (i = U_LINES; i < U_LINES + LCD_Y_RES; ++i) {
+ /* visible lines */
+ dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
+ dma_desc_table[2*i+1] = (unsigned long)fb_buffer +
+ (LCD_Y_RES+U_LINES-1-i)*2;
+ }
+
+ /* last descriptor points to first */
+ dma_desc_table[2*(LCD_Y_RES+U_LINES-1)] = (unsigned long)&dma_desc_table[0];
+
+ set_dma_x_count(CH_PPI, LCD_X_RES);
+ set_dma_x_modify(CH_PPI, LCD_Y_RES * (LCD_BBP / 8));
+ set_dma_y_count(CH_PPI, 0);
+ set_dma_y_modify(CH_PPI, 0);
+ set_dma_next_desc_addr(CH_PPI, (void *)dma_desc_table[0]);
+ set_dma_config(CH_PPI, DMAFLOW_LARGE | NDSIZE_4 | WDSIZE_16);
+
+ } else {
+
+ set_dma_config(CH_PPI, set_bfin_dma_config(DIR_READ,
+ DMA_FLOW_AUTO,
+ INTR_DISABLE,
+ DIMENSION_2D,
+ DATA_SIZE_16,
+ DMA_NOSYNC_KEEP_DMA_BUF));
+ set_dma_x_count(CH_PPI, LCD_X_RES);
+ set_dma_x_modify(CH_PPI, LCD_BBP / 8);
+ set_dma_y_count(CH_PPI, LCD_Y_RES+U_LINES);
+ set_dma_y_modify(CH_PPI, LCD_BBP / 8);
+ set_dma_start_addr(CH_PPI, (unsigned long) fb_buffer);
+ }
+
+ return 0;
+}
+
+static int __devinit request_ports(void)
+{
+ u16 tmr_req[] = TIMERS;
+
+ /*
+ UD: PF13
+ MOD: PF10
+ LBR: PF14
+ PPI_CLK: PF15
+ */
+
+ if (peripheral_request_list(ppi_pins, KBUILD_MODNAME)) {
+ pr_err("requesting PPI peripheral failed\n");
+ return -EBUSY;
+ }
+
+ if (peripheral_request_list(tmr_req, KBUILD_MODNAME)) {
+ peripheral_free_list(ppi_pins);
+ pr_err("requesting timer peripheral failed\n");
+ return -EBUSY;
+ }
+
+#if (defined(UD) && defined(LBR))
+ if (gpio_request(UD, KBUILD_MODNAME)) {
+ pr_err("requesting GPIO %d failed\n", UD);
+ return -EBUSY;
+ }
+
+ if (gpio_request(LBR, KBUILD_MODNAME)) {
+ pr_err("requesting GPIO %d failed\n", LBR);
+ gpio_free(UD);
+ return -EBUSY;
+ }
+
+ gpio_direction_output(UD, 0);
+ gpio_direction_output(LBR, 1);
+
+#endif
+
+ if (gpio_request(MOD, KBUILD_MODNAME)) {
+ pr_err("requesting GPIO %d failed\n", MOD);
+#if (defined(UD) && defined(LBR))
+ gpio_free(LBR);
+ gpio_free(UD);
+#endif
+ return -EBUSY;
+ }
+
+ gpio_direction_output(MOD, 1);
+
+ SSYNC();
+ return 0;
+}
+
+static void free_ports(void)
+{
+ u16 tmr_req[] = TIMERS;
+
+ peripheral_free_list(ppi_pins);
+ peripheral_free_list(tmr_req);
+
+#if defined(UD) && defined(LBR)
+ gpio_free(LBR);
+ gpio_free(UD);
+#endif
+ gpio_free(MOD);
+}
+
+static struct fb_info bfin_lq035_fb;
+
+static struct fb_var_screeninfo bfin_lq035_fb_defined = {
+ .bits_per_pixel = LCD_BBP,
+ .activate = FB_ACTIVATE_TEST,
+ .xres = LCD_X_RES, /*default portrait mode RGB*/
+ .yres = LCD_Y_RES,
+ .xres_virtual = LCD_X_RES,
+ .yres_virtual = LCD_Y_RES,
+ .height = -1,
+ .width = -1,
+ .left_margin = 0,
+ .right_margin = 0,
+ .upper_margin = 0,
+ .lower_margin = 0,
+ .red = {11, 5, 0},
+ .green = {5, 6, 0},
+ .blue = {0, 5, 0},
+ .transp = {0, 0, 0},
+};
+
+static struct fb_fix_screeninfo bfin_lq035_fb_fix __devinitdata = {
+ .id = KBUILD_MODNAME,
+ .smem_len = ACTIVE_VIDEO_MEM_SIZE,
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+ .ypanstep = 0,
+ .line_length = LCD_X_RES*(LCD_BBP/8),
+ .accel = FB_ACCEL_NONE,
+};
+
+
+static int bfin_lq035_fb_open(struct fb_info *info, int user)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfin_lq035_lock, flags);
+ lq035_open_cnt++;
+ spin_unlock_irqrestore(&bfin_lq035_lock, flags);
+
+ if (lq035_open_cnt <= 1) {
+ bfin_write_PPI_CONTROL(0);
+ SSYNC();
+
+ set_vcomm();
+ config_dma();
+ config_ppi();
+
+ /* start dma */
+ enable_dma(CH_PPI);
+ SSYNC();
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+ SSYNC();
+
+ if (!t_conf_done) {
+ config_timers();
+ start_timers();
+ }
+ /* gpio_set_value(MOD,1); */
+ }
+
+ return 0;
+}
+
+static int bfin_lq035_fb_release(struct fb_info *info, int user)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfin_lq035_lock, flags);
+ lq035_open_cnt--;
+ spin_unlock_irqrestore(&bfin_lq035_lock, flags);
+
+
+ if (lq035_open_cnt <= 0) {
+
+ bfin_write_PPI_CONTROL(0);
+ SSYNC();
+
+ disable_dma(CH_PPI);
+ }
+
+ return 0;
+}
+
+
+static int bfin_lq035_fb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ switch (var->bits_per_pixel) {
+ case 16:/* DIRECTCOLOUR, 64k */
+ var->red.offset = info->var.red.offset;
+ var->green.offset = info->var.green.offset;
+ var->blue.offset = info->var.blue.offset;
+ var->red.length = info->var.red.length;
+ var->green.length = info->var.green.length;
+ var->blue.length = info->var.blue.length;
+ var->transp.offset = 0;
+ var->transp.length = 0;
+ var->transp.msb_right = 0;
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+ break;
+ default:
+ pr_debug("%s: depth not supported: %u BPP\n", __func__,
+ var->bits_per_pixel);
+ return -EINVAL;
+ }
+
+ if (info->var.xres != var->xres ||
+ info->var.yres != var->yres ||
+ info->var.xres_virtual != var->xres_virtual ||
+ info->var.yres_virtual != var->yres_virtual) {
+ pr_debug("%s: Resolution not supported: X%u x Y%u\n",
+ __func__, var->xres, var->yres);
+ return -EINVAL;
+ }
+
+ /*
+ * Memory limit
+ */
+
+ if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+ pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+ __func__, var->yres_virtual);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* fb_rotate
+ * Rotate the display of this angle. This doesn't seems to be used by the core,
+ * but as our hardware supports it, so why not implementing it...
+ */
+static void bfin_lq035_fb_rotate(struct fb_info *fbi, int angle)
+{
+ pr_debug("%s: %p %d", __func__, fbi, angle);
+#if (defined(UD) && defined(LBR))
+ switch (angle) {
+
+ case 180:
+ gpio_set_value(LBR, 0);
+ gpio_set_value(UD, 1);
+ break;
+ default:
+ gpio_set_value(LBR, 1);
+ gpio_set_value(UD, 0);
+ break;
+ }
+#endif
+}
+
+static int bfin_lq035_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ if (nocursor)
+ return 0;
+ else
+ return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static int bfin_lq035_fb_setcolreg(u_int regno, u_int red, u_int green,
+ u_int blue, u_int transp,
+ struct fb_info *info)
+{
+ if (regno >= NBR_PALETTE)
+ return -EINVAL;
+
+ if (info->var.grayscale)
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+
+ u32 value;
+ /* Place color in the pseudopalette */
+ if (regno > 16)
+ return -EINVAL;
+
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset)|
+ (blue << info->var.blue.offset);
+ value &= 0xFFFF;
+
+ ((u32 *) (info->pseudo_palette))[regno] = value;
+
+ }
+
+ return 0;
+}
+
+static struct fb_ops bfin_lq035_fb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = bfin_lq035_fb_open,
+ .fb_release = bfin_lq035_fb_release,
+ .fb_check_var = bfin_lq035_fb_check_var,
+ .fb_rotate = bfin_lq035_fb_rotate,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_cursor = bfin_lq035_fb_cursor,
+ .fb_setcolreg = bfin_lq035_fb_setcolreg,
+};
+
+static int bl_get_brightness(struct backlight_device *bd)
+{
+ return current_brightness;
+}
+
+static const struct backlight_ops bfin_lq035fb_bl_ops = {
+ .get_brightness = bl_get_brightness,
+};
+
+static struct backlight_device *bl_dev;
+
+static int bfin_lcd_get_power(struct lcd_device *dev)
+{
+ return 0;
+}
+
+static int bfin_lcd_set_power(struct lcd_device *dev, int power)
+{
+ return 0;
+}
+
+static int bfin_lcd_get_contrast(struct lcd_device *dev)
+{
+ return (int)vcomm_value;
+}
+
+static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
+{
+ if (contrast > 255)
+ contrast = 255;
+ if (contrast < 0)
+ contrast = 0;
+
+ vcomm_value = (unsigned char)contrast;
+ set_vcomm();
+ return 0;
+}
+
+static int bfin_lcd_check_fb(struct lcd_device *lcd, struct fb_info *fi)
+{
+ if (!fi || (fi == &bfin_lq035_fb))
+ return 1;
+ return 0;
+}
+
+static struct lcd_ops bfin_lcd_ops = {
+ .get_power = bfin_lcd_get_power,
+ .set_power = bfin_lcd_set_power,
+ .get_contrast = bfin_lcd_get_contrast,
+ .set_contrast = bfin_lcd_set_contrast,
+ .check_fb = bfin_lcd_check_fb,
+};
+
+static struct lcd_device *lcd_dev;
+
+static int __devinit bfin_lq035_probe(struct platform_device *pdev)
+{
+ struct backlight_properties props;
+ dma_addr_t dma_handle;
+ int ret;
+
+ if (request_dma(CH_PPI, KBUILD_MODNAME)) {
+ pr_err("couldn't request PPI DMA\n");
+ return -EFAULT;
+ }
+
+ if (request_ports()) {
+ pr_err("couldn't request gpio port\n");
+ ret = -EFAULT;
+ goto out_ports;
+ }
+
+ fb_buffer = dma_alloc_coherent(NULL, TOTAL_VIDEO_MEM_SIZE,
+ &dma_handle, GFP_KERNEL);
+ if (fb_buffer == NULL) {
+ pr_err("couldn't allocate dma buffer\n");
+ ret = -ENOMEM;
+ goto out_dma_coherent;
+ }
+
+ if (L1_DATA_A_LENGTH)
+ dma_desc_table = l1_data_sram_zalloc(TOTAL_DMA_DESC_SIZE);
+ else
+ dma_desc_table = dma_alloc_coherent(NULL, TOTAL_DMA_DESC_SIZE,
+ &dma_handle, 0);
+
+ if (dma_desc_table == NULL) {
+ pr_err("couldn't allocate dma descriptor\n");
+ ret = -ENOMEM;
+ goto out_table;
+ }
+
+ bfin_lq035_fb.screen_base = (void *)fb_buffer;
+ bfin_lq035_fb_fix.smem_start = (int)fb_buffer;
+ if (landscape) {
+ bfin_lq035_fb_defined.xres = LCD_Y_RES;
+ bfin_lq035_fb_defined.yres = LCD_X_RES;
+ bfin_lq035_fb_defined.xres_virtual = LCD_Y_RES;
+ bfin_lq035_fb_defined.yres_virtual = LCD_X_RES;
+
+ bfin_lq035_fb_fix.line_length = LCD_Y_RES*(LCD_BBP/8);
+ } else {
+ bfin_lq035_fb.screen_base += ACTIVE_VIDEO_MEM_OFFSET;
+ bfin_lq035_fb_fix.smem_start += ACTIVE_VIDEO_MEM_OFFSET;
+ }
+
+ bfin_lq035_fb_defined.green.msb_right = 0;
+ bfin_lq035_fb_defined.red.msb_right = 0;
+ bfin_lq035_fb_defined.blue.msb_right = 0;
+ bfin_lq035_fb_defined.green.offset = 5;
+ bfin_lq035_fb_defined.green.length = 6;
+ bfin_lq035_fb_defined.red.length = 5;
+ bfin_lq035_fb_defined.blue.length = 5;
+
+ if (bgr) {
+ bfin_lq035_fb_defined.red.offset = 0;
+ bfin_lq035_fb_defined.blue.offset = 11;
+ } else {
+ bfin_lq035_fb_defined.red.offset = 11;
+ bfin_lq035_fb_defined.blue.offset = 0;
+ }
+
+ bfin_lq035_fb.fbops = &bfin_lq035_fb_ops;
+ bfin_lq035_fb.var = bfin_lq035_fb_defined;
+
+ bfin_lq035_fb.fix = bfin_lq035_fb_fix;
+ bfin_lq035_fb.flags = FBINFO_DEFAULT;
+
+
+ bfin_lq035_fb.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
+ if (bfin_lq035_fb.pseudo_palette == NULL) {
+ pr_err("failed to allocate pseudo_palette\n");
+ ret = -ENOMEM;
+ goto out_palette;
+ }
+
+ if (fb_alloc_cmap(&bfin_lq035_fb.cmap, NBR_PALETTE, 0) < 0) {
+ pr_err("failed to allocate colormap (%d entries)\n",
+ NBR_PALETTE);
+ ret = -EFAULT;
+ goto out_cmap;
+ }
+
+ if (register_framebuffer(&bfin_lq035_fb) < 0) {
+ pr_err("unable to register framebuffer\n");
+ ret = -EINVAL;
+ goto out_reg;
+ }
+
+ i2c_add_driver(&ad5280_driver);
+
+ memset(&props, 0, sizeof(props));
+ props.max_brightness = MAX_BRIGHENESS;
+ bl_dev = backlight_device_register("bf537-bl", NULL, NULL,
+ &bfin_lq035fb_bl_ops, &props);
+
+ lcd_dev = lcd_device_register(KBUILD_MODNAME, &pdev->dev, NULL,
+ &bfin_lcd_ops);
+ if (IS_ERR(lcd_dev)) {
+ pr_err("unable to register lcd\n");
+ ret = PTR_ERR(lcd_dev);
+ goto out_lcd;
+ }
+ lcd_dev->props.max_contrast = 255,
+
+ pr_info("initialized");
+
+ return 0;
+out_lcd:
+ unregister_framebuffer(&bfin_lq035_fb);
+out_reg:
+ fb_dealloc_cmap(&bfin_lq035_fb.cmap);
+out_cmap:
+ kfree(bfin_lq035_fb.pseudo_palette);
+out_palette:
+out_table:
+ dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+ fb_buffer = NULL;
+out_dma_coherent:
+ free_ports();
+out_ports:
+ free_dma(CH_PPI);
+ return ret;
+}
+
+static int __devexit bfin_lq035_remove(struct platform_device *pdev)
+{
+ if (fb_buffer != NULL)
+ dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+
+ if (L1_DATA_A_LENGTH)
+ l1_data_sram_free(dma_desc_table);
+ else
+ dma_free_coherent(NULL, TOTAL_DMA_DESC_SIZE, NULL, 0);
+
+ bfin_write_TIMER_DISABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS|
+ TIMEN_LP|TIMEN_REV);
+ t_conf_done = 0;
+
+ free_dma(CH_PPI);
+
+
+ kfree(bfin_lq035_fb.pseudo_palette);
+ fb_dealloc_cmap(&bfin_lq035_fb.cmap);
+
+
+ lcd_device_unregister(lcd_dev);
+ backlight_device_unregister(bl_dev);
+
+ unregister_framebuffer(&bfin_lq035_fb);
+ i2c_del_driver(&ad5280_driver);
+
+ free_ports();
+
+ pr_info("unregistered LCD driver\n");
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_lq035_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (lq035_open_cnt > 0) {
+ bfin_write_PPI_CONTROL(0);
+ SSYNC();
+ disable_dma(CH_PPI);
+ }
+
+ return 0;
+}
+
+static int bfin_lq035_resume(struct platform_device *pdev)
+{
+ if (lq035_open_cnt > 0) {
+ bfin_write_PPI_CONTROL(0);
+ SSYNC();
+
+ config_dma();
+ config_ppi();
+
+ enable_dma(CH_PPI);
+ bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+ SSYNC();
+
+ config_timers();
+ start_timers();
+ } else {
+ t_conf_done = 0;
+ }
+
+ return 0;
+}
+#else
+# define bfin_lq035_suspend NULL
+# define bfin_lq035_resume NULL
+#endif
+
+static struct platform_driver bfin_lq035_driver = {
+ .probe = bfin_lq035_probe,
+ .remove = __devexit_p(bfin_lq035_remove),
+ .suspend = bfin_lq035_suspend,
+ .resume = bfin_lq035_resume,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init bfin_lq035_driver_init(void)
+{
+ request_module("i2c-bfin-twi");
+ return platform_driver_register(&bfin_lq035_driver);
+}
+module_init(bfin_lq035_driver_init);
+
+static void __exit bfin_lq035_driver_cleanup(void)
+{
+ platform_driver_unregister(&bfin_lq035_driver);
+}
+module_exit(bfin_lq035_driver_cleanup);
+
+MODULE_DESCRIPTION("SHARP LQ035Q7DB03 TFT LCD Driver");
+MODULE_LICENSE("GPL");
projects / mv-sheeva.git / blobdiff