MODULE_PARM_DESC(ieee80211_disable_40mhz_24ghz,
"Disable 40MHz support in the 2.4GHz band");
+static struct lock_class_key ieee80211_rx_skb_queue_class;
+
void ieee80211_configure_filter(struct ieee80211_local *local)
{
u64 mc;
if (local->monitors || local->scanning)
new_flags |= FIF_BCN_PRBRESP_PROMISC;
+ if (local->fif_probe_req || local->probe_req_reg)
+ new_flags |= FIF_PROBE_REQ;
+
if (local->fif_fcsfail)
new_flags |= FIF_FCSFAIL;
int ret = 0;
int power;
enum nl80211_channel_type channel_type;
+ u32 offchannel_flag;
might_sleep();
scan_chan = local->scan_channel;
+ offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
- } else if (local->tmp_channel) {
+ } else if (local->tmp_channel &&
+ local->oper_channel != local->tmp_channel) {
chan = scan_chan = local->tmp_channel;
channel_type = local->tmp_channel_type;
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
channel_type = local->_oper_channel_type;
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
}
+ offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
- if (chan != local->hw.conf.channel ||
+ if (offchannel_flag || chan != local->hw.conf.channel ||
channel_type != local->hw.conf.channel_type) {
local->hw.conf.channel = chan;
local->hw.conf.channel_type = channel_type;
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
else if (sdata->vif.type == NL80211_IFTYPE_AP)
sdata->vif.bss_conf.bssid = sdata->vif.addr;
+ else if (sdata->vif.type == NL80211_IFTYPE_WDS)
+ sdata->vif.bss_conf.bssid = NULL;
else if (ieee80211_vif_is_mesh(&sdata->vif)) {
sdata->vif.bss_conf.bssid = zero;
} else {
switch (sdata->vif.type) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_WDS:
case NL80211_IFTYPE_MESH_POINT:
break;
default:
sdata->vif.bss_conf.enable_beacon =
!!sdata->u.ibss.presp;
break;
+#ifdef CONFIG_MAC80211_MESH
case NL80211_IFTYPE_MESH_POINT:
- sdata->vif.bss_conf.enable_beacon = true;
+ sdata->vif.bss_conf.enable_beacon =
+ !!sdata->u.mesh.mesh_id_len;
break;
+#endif
default:
/* not reached */
WARN_ON(1);
struct ieee80211_local *local =
container_of(work, struct ieee80211_local, restart_work);
+ /* wait for scan work complete */
+ flush_workqueue(local->workqueue);
+
+ mutex_lock(&local->mtx);
+ WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
+ "%s called with hardware scan in progress\n", __func__);
+ mutex_unlock(&local->mtx);
+
rtnl_lock();
+ ieee80211_scan_cancel(local);
ieee80211_reconfig(local);
rtnl_unlock();
}
trace_api_restart_hw(local);
- /* use this reason, __ieee80211_resume will unblock it */
+ /* use this reason, ieee80211_reconfig will unblock it */
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
container_of(work, struct ieee80211_local, recalc_smps);
mutex_lock(&local->iflist_mtx);
- ieee80211_recalc_smps(local, NULL);
+ ieee80211_recalc_smps(local);
mutex_unlock(&local->iflist_mtx);
}
struct ieee80211_if_managed *ifmgd;
int c = 0;
- if (!netif_running(ndev))
- return NOTIFY_DONE;
-
/* Make sure it's our interface that got changed */
if (!wdev)
return NOTIFY_DONE;
sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
bss_conf = &sdata->vif.bss_conf;
+ if (!ieee80211_sdata_running(sdata))
+ return NOTIFY_DONE;
+
/* ARP filtering is only supported in managed mode */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return NOTIFY_DONE;
- idev = sdata->dev->ip_ptr;
+ idev = __in_dev_get_rtnl(sdata->dev);
if (!idev)
return NOTIFY_DONE;
}
#endif
+static int ieee80211_napi_poll(struct napi_struct *napi, int budget)
+{
+ struct ieee80211_local *local =
+ container_of(napi, struct ieee80211_local, napi);
+
+ return local->ops->napi_poll(&local->hw, budget);
+}
+
+void ieee80211_napi_schedule(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ napi_schedule(&local->napi);
+}
+EXPORT_SYMBOL(ieee80211_napi_schedule);
+
+void ieee80211_napi_complete(struct ieee80211_hw *hw)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+
+ napi_complete(&local->napi);
+}
+EXPORT_SYMBOL(ieee80211_napi_complete);
+
+/* There isn't a lot of sense in it, but you can transmit anything you like */
+static const struct ieee80211_txrx_stypes
+ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
+ [NL80211_IFTYPE_ADHOC] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_STATION] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
+ },
+ [NL80211_IFTYPE_AP] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_AP_VLAN] = {
+ /* copy AP */
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_P2P_CLIENT] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
+ },
+ [NL80211_IFTYPE_P2P_GO] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
+ BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
+ BIT(IEEE80211_STYPE_DISASSOC >> 4) |
+ BIT(IEEE80211_STYPE_AUTH >> 4) |
+ BIT(IEEE80211_STYPE_DEAUTH >> 4) |
+ BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+ [NL80211_IFTYPE_MESH_POINT] = {
+ .tx = 0xffff,
+ .rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+ },
+};
+
struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
const struct ieee80211_ops *ops)
{
if (!wiphy)
return NULL;
+ wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
+
+ wiphy->privid = mac80211_wiphy_privid;
+
wiphy->flags |= WIPHY_FLAG_NETNS_OK |
WIPHY_FLAG_4ADDR_AP |
- WIPHY_FLAG_4ADDR_STATION;
- wiphy->privid = mac80211_wiphy_privid;
+ WIPHY_FLAG_4ADDR_STATION |
+ WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
+
+ if (!ops->set_key)
+ wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
/* set up some defaults */
local->hw.queues = 1;
local->hw.max_rates = 1;
+ local->hw.max_report_rates = 0;
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
local->user_power_level = -1;
__hw_addr_init(&local->mc_list);
mutex_init(&local->iflist_mtx);
- mutex_init(&local->scan_mtx);
+ mutex_init(&local->mtx);
mutex_init(&local->key_mtx);
spin_lock_init(&local->filter_lock);
spin_lock_init(&local->queue_stop_reason_lock);
+ /*
+ * The rx_skb_queue is only accessed from tasklets,
+ * but other SKB queues are used from within IRQ
+ * context. Therefore, this one needs a different
+ * locking class so our direct, non-irq-safe use of
+ * the queue's lock doesn't throw lockdep warnings.
+ */
+ skb_queue_head_init_class(&local->rx_skb_queue,
+ &ieee80211_rx_skb_queue_class);
+
INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
ieee80211_work_init(local);
skb_queue_head_init(&local->skb_queue);
skb_queue_head_init(&local->skb_queue_unreliable);
+ /* init dummy netdev for use w/ NAPI */
+ init_dummy_netdev(&local->napi_dev);
+
+ ieee80211_led_names(local);
+
+ ieee80211_hw_roc_setup(local);
+
return local_to_hw(local);
}
EXPORT_SYMBOL(ieee80211_alloc_hw);
int channels, max_bitrates;
bool supp_ht;
static const u32 cipher_suites[] = {
+ /* keep WEP first, it may be removed below */
WLAN_CIPHER_SUITE_WEP40,
WLAN_CIPHER_SUITE_WEP104,
WLAN_CIPHER_SUITE_TKIP,
WLAN_CIPHER_SUITE_AES_CMAC
};
+ if (hw->max_report_rates == 0)
+ hw->max_report_rates = hw->max_rates;
+
/*
* generic code guarantees at least one band,
* set this very early because much code assumes
/* mac80211 always supports monitor */
local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+#ifndef CONFIG_MAC80211_MESH
+ /* mesh depends on Kconfig, but drivers should set it if they want */
+ local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
+#endif
+
+ /* mac80211 supports control port protocol changing */
+ local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
+
if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)
/*
* Calculate scan IE length -- we need this to alloc
* memory and to subtract from the driver limit. It
- * includes the (extended) supported rates and HT
+ * includes the DS Params, (extended) supported rates, and HT
* information -- SSID is the driver's responsibility.
*/
- local->scan_ies_len = 4 + max_bitrates; /* (ext) supp rates */
+ local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
+ 3 /* DS Params */;
if (supp_ht)
local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
if (local->hw.wiphy->max_scan_ie_len)
local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
- local->hw.wiphy->cipher_suites = cipher_suites;
- local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
- if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
- local->hw.wiphy->n_cipher_suites--;
+ /* Set up cipher suites unless driver already did */
+ if (!local->hw.wiphy->cipher_suites) {
+ local->hw.wiphy->cipher_suites = cipher_suites;
+ local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+ if (!(local->hw.flags & IEEE80211_HW_MFP_CAPABLE))
+ local->hw.wiphy->n_cipher_suites--;
+ }
+ if (IS_ERR(local->wep_tx_tfm) || IS_ERR(local->wep_rx_tfm)) {
+ if (local->hw.wiphy->cipher_suites == cipher_suites) {
+ local->hw.wiphy->cipher_suites += 2;
+ local->hw.wiphy->n_cipher_suites -= 2;
+ } else {
+ u32 *suites;
+ int r, w = 0;
+
+ /* Filter out WEP */
+
+ suites = kmemdup(
+ local->hw.wiphy->cipher_suites,
+ sizeof(u32) * local->hw.wiphy->n_cipher_suites,
+ GFP_KERNEL);
+ if (!suites)
+ return -ENOMEM;
+ for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
+ u32 suite = local->hw.wiphy->cipher_suites[r];
+ if (suite == WLAN_CIPHER_SUITE_WEP40 ||
+ suite == WLAN_CIPHER_SUITE_WEP104)
+ continue;
+ suites[w++] = suite;
+ }
+ local->hw.wiphy->cipher_suites = suites;
+ local->hw.wiphy->n_cipher_suites = w;
+ local->wiphy_ciphers_allocated = true;
+ }
+ }
+
+ if (!local->ops->remain_on_channel)
+ local->hw.wiphy->max_remain_on_channel_duration = 5000;
result = wiphy_register(local->hw.wiphy);
if (result < 0)
hw->queues = IEEE80211_MAX_QUEUES;
local->workqueue =
- create_singlethread_workqueue(wiphy_name(local->hw.wiphy));
+ alloc_ordered_workqueue(wiphy_name(local->hw.wiphy), 0);
if (!local->workqueue) {
result = -ENOMEM;
goto fail_workqueue;
result = ieee80211_wep_init(local);
if (result < 0)
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
+ wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
+ result);
rtnl_lock();
result = ieee80211_init_rate_ctrl_alg(local,
hw->rate_control_algorithm);
if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize rate control "
- "algorithm\n", wiphy_name(local->hw.wiphy));
+ wiphy_debug(local->hw.wiphy,
+ "Failed to initialize rate control algorithm\n");
goto fail_rate;
}
result = ieee80211_if_add(local, "wlan%d", NULL,
NL80211_IFTYPE_STATION, NULL);
if (result)
- printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
- wiphy_name(local->hw.wiphy));
+ wiphy_warn(local->hw.wiphy,
+ "Failed to add default virtual iface\n");
}
rtnl_unlock();
goto fail_ifa;
#endif
+ netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll,
+ local->hw.napi_weight);
+
return 0;
#ifdef CONFIG_INET
fail_workqueue:
wiphy_unregister(local->hw.wiphy);
fail_wiphy_register:
+ if (local->wiphy_ciphers_allocated)
+ kfree(local->hw.wiphy->cipher_suites);
kfree(local->int_scan_req);
return result;
}
*/
del_timer_sync(&local->work_timer);
+ cancel_work_sync(&local->restart_work);
cancel_work_sync(&local->reconfig_filter);
ieee80211_clear_tx_pending(local);
if (skb_queue_len(&local->skb_queue) ||
skb_queue_len(&local->skb_queue_unreliable))
- printk(KERN_WARNING "%s: skb_queue not empty\n",
- wiphy_name(local->hw.wiphy));
+ wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
+ skb_queue_purge(&local->rx_skb_queue);
destroy_workqueue(local->workqueue);
wiphy_unregister(local->hw.wiphy);
struct ieee80211_local *local = hw_to_local(hw);
mutex_destroy(&local->iflist_mtx);
- mutex_destroy(&local->scan_mtx);
+ mutex_destroy(&local->mtx);
+
+ if (local->wiphy_ciphers_allocated)
+ kfree(local->hw.wiphy->cipher_suites);
wiphy_free(local->hw.wiphy);
}
rc80211_minstrel_ht_exit();
rc80211_minstrel_exit();
- /*
- * For key todo, it'll be empty by now but the work
- * might still be scheduled.
- */
- flush_scheduled_work();
-
if (mesh_allocated)
ieee80211s_stop();
projects / mv-sheeva.git / blobdiff