* address's parameters:
*
* struct sctp_paddrparams {
- * sctp_assoc_t spp_assoc_id;
- * struct sockaddr_storage spp_address;
- * uint32_t spp_hbinterval;
- * uint16_t spp_pathmaxrxt;
- * };
- *
- * spp_assoc_id - (UDP style socket) This is filled in the application,
- * and identifies the association for this query.
+ * sctp_assoc_t spp_assoc_id;
+ * struct sockaddr_storage spp_address;
+ * uint32_t spp_hbinterval;
+ * uint16_t spp_pathmaxrxt;
+ * uint32_t spp_pathmtu;
+ * uint32_t spp_sackdelay;
+ * uint32_t spp_flags;
+ * };
+ *
+ * spp_assoc_id - (one-to-many style socket) This is filled in the
+ * application, and identifies the association for
+ * this query.
* spp_address - This specifies which address is of interest.
* spp_hbinterval - This contains the value of the heartbeat interval,
- * in milliseconds. A value of 0, when modifying the
- * parameter, specifies that the heartbeat on this
- * address should be disabled. A value of UINT32_MAX
- * (4294967295), when modifying the parameter,
- * specifies that a heartbeat should be sent
- * immediately to the peer address, and the current
- * interval should remain unchanged.
+ * in milliseconds. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
* spp_pathmaxrxt - This contains the maximum number of
* retransmissions before this address shall be
- * considered unreachable.
+ * considered unreachable. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
+ * spp_pathmtu - When Path MTU discovery is disabled the value
+ * specified here will be the "fixed" path mtu.
+ * Note that if the spp_address field is empty
+ * then all associations on this address will
+ * have this fixed path mtu set upon them.
+ *
+ * spp_sackdelay - When delayed sack is enabled, this value specifies
+ * the number of milliseconds that sacks will be delayed
+ * for. This value will apply to all addresses of an
+ * association if the spp_address field is empty. Note
+ * also, that if delayed sack is enabled and this
+ * value is set to 0, no change is made to the last
+ * recorded delayed sack timer value.
+ *
+ * spp_flags - These flags are used to control various features
+ * on an association. The flag field may contain
+ * zero or more of the following options.
+ *
+ * SPP_HB_ENABLE - Enable heartbeats on the
+ * specified address. Note that if the address
+ * field is empty all addresses for the association
+ * have heartbeats enabled upon them.
+ *
+ * SPP_HB_DISABLE - Disable heartbeats on the
+ * speicifed address. Note that if the address
+ * field is empty all addresses for the association
+ * will have their heartbeats disabled. Note also
+ * that SPP_HB_ENABLE and SPP_HB_DISABLE are
+ * mutually exclusive, only one of these two should
+ * be specified. Enabling both fields will have
+ * undetermined results.
+ *
+ * SPP_HB_DEMAND - Request a user initiated heartbeat
+ * to be made immediately.
+ *
+ * SPP_PMTUD_ENABLE - This field will enable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected.
+ *
+ * SPP_PMTUD_DISABLE - This field will disable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected. Not also that
+ * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually
+ * exclusive. Enabling both will have undetermined
+ * results.
+ *
+ * SPP_SACKDELAY_ENABLE - Setting this flag turns
+ * on delayed sack. The time specified in spp_sackdelay
+ * is used to specify the sack delay for this address. Note
+ * that if spp_address is empty then all addresses will
+ * enable delayed sack and take on the sack delay
+ * value specified in spp_sackdelay.
+ * SPP_SACKDELAY_DISABLE - Setting this flag turns
+ * off delayed sack. If the spp_address field is blank then
+ * delayed sack is disabled for the entire association. Note
+ * also that this field is mutually exclusive to
+ * SPP_SACKDELAY_ENABLE, setting both will have undefined
+ * results.
*/
+int sctp_apply_peer_addr_params(struct sctp_paddrparams *params,
+ struct sctp_transport *trans,
+ struct sctp_association *asoc,
+ struct sctp_sock *sp,
+ int hb_change,
+ int pmtud_change,
+ int sackdelay_change)
+{
+ int error;
+
+ if (params->spp_flags & SPP_HB_DEMAND && trans) {
+ error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans);
+ if (error)
+ return error;
+ }
+
+ if (params->spp_hbinterval) {
+ if (trans) {
+ trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
+ } else if (asoc) {
+ asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval);
+ } else {
+ sp->hbinterval = params->spp_hbinterval;
+ }
+ }
+
+ if (hb_change) {
+ if (trans) {
+ trans->param_flags =
+ (trans->param_flags & ~SPP_HB) | hb_change;
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_HB) | hb_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_HB) | hb_change;
+ }
+ }
+
+ if (params->spp_pathmtu) {
+ if (trans) {
+ trans->pathmtu = params->spp_pathmtu;
+ sctp_assoc_sync_pmtu(asoc);
+ } else if (asoc) {
+ asoc->pathmtu = params->spp_pathmtu;
+ sctp_frag_point(sp, params->spp_pathmtu);
+ } else {
+ sp->pathmtu = params->spp_pathmtu;
+ }
+ }
+
+ if (pmtud_change) {
+ if (trans) {
+ int update = (trans->param_flags & SPP_PMTUD_DISABLE) &&
+ (params->spp_flags & SPP_PMTUD_ENABLE);
+ trans->param_flags =
+ (trans->param_flags & ~SPP_PMTUD) | pmtud_change;
+ if (update) {
+ sctp_transport_pmtu(trans);
+ sctp_assoc_sync_pmtu(asoc);
+ }
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_PMTUD) | pmtud_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_PMTUD) | pmtud_change;
+ }
+ }
+
+ if (params->spp_sackdelay) {
+ if (trans) {
+ trans->sackdelay =
+ msecs_to_jiffies(params->spp_sackdelay);
+ } else if (asoc) {
+ asoc->sackdelay =
+ msecs_to_jiffies(params->spp_sackdelay);
+ } else {
+ sp->sackdelay = params->spp_sackdelay;
+ }
+ }
+
+ if (sackdelay_change) {
+ if (trans) {
+ trans->param_flags =
+ (trans->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ } else if (asoc) {
+ asoc->param_flags =
+ (asoc->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ } else {
+ sp->param_flags =
+ (sp->param_flags & ~SPP_SACKDELAY) |
+ sackdelay_change;
+ }
+ }
+
+ if (params->spp_pathmaxrxt) {
+ if (trans) {
+ trans->pathmaxrxt = params->spp_pathmaxrxt;
+ } else if (asoc) {
+ asoc->pathmaxrxt = params->spp_pathmaxrxt;
+ } else {
+ sp->pathmaxrxt = params->spp_pathmaxrxt;
+ }
+ }
+
+ return 0;
+}
+
static int sctp_setsockopt_peer_addr_params(struct sock *sk,
char __user *optval, int optlen)
{
- struct sctp_paddrparams params;
- struct sctp_transport *trans;
+ struct sctp_paddrparams params;
+ struct sctp_transport *trans = NULL;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
int error;
+ int hb_change, pmtud_change, sackdelay_change;
if (optlen != sizeof(struct sctp_paddrparams))
- return -EINVAL;
+ return - EINVAL;
+
if (copy_from_user(¶ms, optval, optlen))
return -EFAULT;
- /*
- * API 7. Socket Options (setting the default value for the endpoint)
- * All options that support specific settings on an association by
- * filling in either an association id variable or a sockaddr_storage
- * SHOULD also support setting of the same value for the entire endpoint
- * (i.e. future associations). To accomplish this the following logic is
- * used when setting one of these options:
-
- * c) If neither the sockaddr_storage or association identification is
- * set i.e. the sockaddr_storage is set to all 0's (INADDR_ANY) and
- * the association identification is 0, the settings are a default
- * and to be applied to the endpoint (all future associations).
- */
+ /* Validate flags and value parameters. */
+ hb_change = params.spp_flags & SPP_HB;
+ pmtud_change = params.spp_flags & SPP_PMTUD;
+ sackdelay_change = params.spp_flags & SPP_SACKDELAY;
+
+ if (hb_change == SPP_HB ||
+ pmtud_change == SPP_PMTUD ||
+ sackdelay_change == SPP_SACKDELAY ||
+ params.spp_sackdelay > 500 ||
+ (params.spp_pathmtu
+ && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT))
+ return -EINVAL;
- /* update default value for endpoint (all future associations) */
- if (!params.spp_assoc_id &&
- sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
- /* Manual heartbeat on an endpoint is invalid. */
- if (0xffffffff == params.spp_hbinterval)
+ /* If an address other than INADDR_ANY is specified, and
+ * no transport is found, then the request is invalid.
+ */
+ if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
+ trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
+ params.spp_assoc_id);
+ if (!trans)
return -EINVAL;
- else if (params.spp_hbinterval)
- sctp_sk(sk)->paddrparam.spp_hbinterval =
- params.spp_hbinterval;
- if (params.spp_pathmaxrxt)
- sctp_sk(sk)->paddrparam.spp_pathmaxrxt =
- params.spp_pathmaxrxt;
- return 0;
}
- trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
- params.spp_assoc_id);
- if (!trans)
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
+ */
+ asoc = sctp_id2assoc(sk, params.spp_assoc_id);
+ if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP))
return -EINVAL;
- /* Applications can enable or disable heartbeats for any peer address
- * of an association, modify an address's heartbeat interval, force a
- * heartbeat to be sent immediately, and adjust the address's maximum
- * number of retransmissions sent before an address is considered
- * unreachable.
- *
- * The value of the heartbeat interval, in milliseconds. A value of
- * UINT32_MAX (4294967295), when modifying the parameter, specifies
- * that a heartbeat should be sent immediately to the peer address,
- * and the current interval should remain unchanged.
- */
- if (0xffffffff == params.spp_hbinterval) {
- error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans);
- if (error)
- return error;
- } else {
- /* The value of the heartbeat interval, in milliseconds. A value of 0,
- * when modifying the parameter, specifies that the heartbeat on this
- * address should be disabled.
+ /* Heartbeat demand can only be sent on a transport or
+ * association, but not a socket.
*/
- if (params.spp_hbinterval) {
- trans->hb_allowed = 1;
- trans->hb_interval =
- msecs_to_jiffies(params.spp_hbinterval);
- } else
- trans->hb_allowed = 0;
- }
+ if (params.spp_flags & SPP_HB_DEMAND && !trans && !asoc)
+ return -EINVAL;
+
+ /* Process parameters. */
+ error = sctp_apply_peer_addr_params(¶ms, trans, asoc, sp,
+ hb_change, pmtud_change,
+ sackdelay_change);
- /* spp_pathmaxrxt contains the maximum number of retransmissions
- * before this address shall be considered unreachable.
+ if (error)
+ return error;
+
+ /* If changes are for association, also apply parameters to each
+ * transport.
*/
- if (params.spp_pathmaxrxt)
- trans->max_retrans = params.spp_pathmaxrxt;
+ if (!trans && asoc) {
+ struct list_head *pos;
+
+ list_for_each(pos, &asoc->peer.transport_addr_list) {
+ trans = list_entry(pos, struct sctp_transport,
+ transports);
+ sctp_apply_peer_addr_params(¶ms, trans, asoc, sp,
+ hb_change, pmtud_change,
+ sackdelay_change);
+ }
+ }
return 0;
}
/* Update the frag_point of the existing associations. */
list_for_each(pos, &(sp->ep->asocs)) {
asoc = list_entry(pos, struct sctp_association, asocs);
- asoc->frag_point = sctp_frag_point(sp, asoc->pmtu);
+ asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu);
}
return 0;
/* Default Peer Address Parameters. These defaults can
* be modified via SCTP_PEER_ADDR_PARAMS
*/
- sp->paddrparam.spp_hbinterval = jiffies_to_msecs(sctp_hb_interval);
- sp->paddrparam.spp_pathmaxrxt = sctp_max_retrans_path;
+ sp->hbinterval = jiffies_to_msecs(sctp_hb_interval);
+ sp->pathmaxrxt = sctp_max_retrans_path;
+ sp->pathmtu = 0; // allow default discovery
+ sp->sackdelay = sctp_sack_timeout;
+ sp->param_flags = SPP_HB_ENABLE |
+ SPP_PMTUD_ENABLE |
+ SPP_SACKDELAY_ENABLE;
/* If enabled no SCTP message fragmentation will be performed.
* Configure through SCTP_DISABLE_FRAGMENTS socket option.
status.sstat_primary.spinfo_cwnd = transport->cwnd;
status.sstat_primary.spinfo_srtt = transport->srtt;
status.sstat_primary.spinfo_rto = jiffies_to_msecs(transport->rto);
- status.sstat_primary.spinfo_mtu = transport->pmtu;
+ status.sstat_primary.spinfo_mtu = transport->pathmtu;
if (status.sstat_primary.spinfo_state == SCTP_UNKNOWN)
status.sstat_primary.spinfo_state = SCTP_ACTIVE;
pinfo.spinfo_cwnd = transport->cwnd;
pinfo.spinfo_srtt = transport->srtt;
pinfo.spinfo_rto = jiffies_to_msecs(transport->rto);
- pinfo.spinfo_mtu = transport->pmtu;
+ pinfo.spinfo_mtu = transport->pathmtu;
if (pinfo.spinfo_state == SCTP_UNKNOWN)
pinfo.spinfo_state = SCTP_ACTIVE;
* address's parameters:
*
* struct sctp_paddrparams {
- * sctp_assoc_t spp_assoc_id;
- * struct sockaddr_storage spp_address;
- * uint32_t spp_hbinterval;
- * uint16_t spp_pathmaxrxt;
- * };
- *
- * spp_assoc_id - (UDP style socket) This is filled in the application,
- * and identifies the association for this query.
+ * sctp_assoc_t spp_assoc_id;
+ * struct sockaddr_storage spp_address;
+ * uint32_t spp_hbinterval;
+ * uint16_t spp_pathmaxrxt;
+ * uint32_t spp_pathmtu;
+ * uint32_t spp_sackdelay;
+ * uint32_t spp_flags;
+ * };
+ *
+ * spp_assoc_id - (one-to-many style socket) This is filled in the
+ * application, and identifies the association for
+ * this query.
* spp_address - This specifies which address is of interest.
* spp_hbinterval - This contains the value of the heartbeat interval,
- * in milliseconds. A value of 0, when modifying the
- * parameter, specifies that the heartbeat on this
- * address should be disabled. A value of UINT32_MAX
- * (4294967295), when modifying the parameter,
- * specifies that a heartbeat should be sent
- * immediately to the peer address, and the current
- * interval should remain unchanged.
+ * in milliseconds. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
* spp_pathmaxrxt - This contains the maximum number of
* retransmissions before this address shall be
- * considered unreachable.
+ * considered unreachable. If a value of zero
+ * is present in this field then no changes are to
+ * be made to this parameter.
+ * spp_pathmtu - When Path MTU discovery is disabled the value
+ * specified here will be the "fixed" path mtu.
+ * Note that if the spp_address field is empty
+ * then all associations on this address will
+ * have this fixed path mtu set upon them.
+ *
+ * spp_sackdelay - When delayed sack is enabled, this value specifies
+ * the number of milliseconds that sacks will be delayed
+ * for. This value will apply to all addresses of an
+ * association if the spp_address field is empty. Note
+ * also, that if delayed sack is enabled and this
+ * value is set to 0, no change is made to the last
+ * recorded delayed sack timer value.
+ *
+ * spp_flags - These flags are used to control various features
+ * on an association. The flag field may contain
+ * zero or more of the following options.
+ *
+ * SPP_HB_ENABLE - Enable heartbeats on the
+ * specified address. Note that if the address
+ * field is empty all addresses for the association
+ * have heartbeats enabled upon them.
+ *
+ * SPP_HB_DISABLE - Disable heartbeats on the
+ * speicifed address. Note that if the address
+ * field is empty all addresses for the association
+ * will have their heartbeats disabled. Note also
+ * that SPP_HB_ENABLE and SPP_HB_DISABLE are
+ * mutually exclusive, only one of these two should
+ * be specified. Enabling both fields will have
+ * undetermined results.
+ *
+ * SPP_HB_DEMAND - Request a user initiated heartbeat
+ * to be made immediately.
+ *
+ * SPP_PMTUD_ENABLE - This field will enable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected.
+ *
+ * SPP_PMTUD_DISABLE - This field will disable PMTU
+ * discovery upon the specified address. Note that
+ * if the address feild is empty then all addresses
+ * on the association are effected. Not also that
+ * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually
+ * exclusive. Enabling both will have undetermined
+ * results.
+ *
+ * SPP_SACKDELAY_ENABLE - Setting this flag turns
+ * on delayed sack. The time specified in spp_sackdelay
+ * is used to specify the sack delay for this address. Note
+ * that if spp_address is empty then all addresses will
+ * enable delayed sack and take on the sack delay
+ * value specified in spp_sackdelay.
+ * SPP_SACKDELAY_DISABLE - Setting this flag turns
+ * off delayed sack. If the spp_address field is blank then
+ * delayed sack is disabled for the entire association. Note
+ * also that this field is mutually exclusive to
+ * SPP_SACKDELAY_ENABLE, setting both will have undefined
+ * results.
*/
static int sctp_getsockopt_peer_addr_params(struct sock *sk, int len,
- char __user *optval, int __user *optlen)
+ char __user *optval, int __user *optlen)
{
- struct sctp_paddrparams params;
- struct sctp_transport *trans;
+ struct sctp_paddrparams params;
+ struct sctp_transport *trans = NULL;
+ struct sctp_association *asoc = NULL;
+ struct sctp_sock *sp = sctp_sk(sk);
if (len != sizeof(struct sctp_paddrparams))
return -EINVAL;
+
if (copy_from_user(¶ms, optval, len))
return -EFAULT;
- /* If no association id is specified retrieve the default value
- * for the endpoint that will be used for all future associations
+ /* If an address other than INADDR_ANY is specified, and
+ * no transport is found, then the request is invalid.
*/
- if (!params.spp_assoc_id &&
- sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
- params.spp_hbinterval = sctp_sk(sk)->paddrparam.spp_hbinterval;
- params.spp_pathmaxrxt = sctp_sk(sk)->paddrparam.spp_pathmaxrxt;
-
- goto done;
+ if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) {
+ trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
+ params.spp_assoc_id);
+ if (!trans) {
+ SCTP_DEBUG_PRINTK("Failed no transport\n");
+ return -EINVAL;
+ }
}
- trans = sctp_addr_id2transport(sk, ¶ms.spp_address,
- params.spp_assoc_id);
- if (!trans)
- return -EINVAL;
-
- /* The value of the heartbeat interval, in milliseconds. A value of 0,
- * when modifying the parameter, specifies that the heartbeat on this
- * address should be disabled.
+ /* Get association, if assoc_id != 0 and the socket is a one
+ * to many style socket, and an association was not found, then
+ * the id was invalid.
*/
- if (!trans->hb_allowed)
- params.spp_hbinterval = 0;
- else
- params.spp_hbinterval = jiffies_to_msecs(trans->hb_interval);
+ asoc = sctp_id2assoc(sk, params.spp_assoc_id);
+ if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) {
+ SCTP_DEBUG_PRINTK("Failed no association\n");
+ return -EINVAL;
+ }
- /* spp_pathmaxrxt contains the maximum number of retransmissions
- * before this address shall be considered unreachable.
- */
- params.spp_pathmaxrxt = trans->max_retrans;
+ if (trans) {
+ /* Fetch transport values. */
+ params.spp_hbinterval = jiffies_to_msecs(trans->hbinterval);
+ params.spp_pathmtu = trans->pathmtu;
+ params.spp_pathmaxrxt = trans->pathmaxrxt;
+ params.spp_sackdelay = jiffies_to_msecs(trans->sackdelay);
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = trans->param_flags;
+ } else if (asoc) {
+ /* Fetch association values. */
+ params.spp_hbinterval = jiffies_to_msecs(asoc->hbinterval);
+ params.spp_pathmtu = asoc->pathmtu;
+ params.spp_pathmaxrxt = asoc->pathmaxrxt;
+ params.spp_sackdelay = jiffies_to_msecs(asoc->sackdelay);
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = asoc->param_flags;
+ } else {
+ /* Fetch socket values. */
+ params.spp_hbinterval = sp->hbinterval;
+ params.spp_pathmtu = sp->pathmtu;
+ params.spp_sackdelay = sp->sackdelay;
+ params.spp_pathmaxrxt = sp->pathmaxrxt;
+
+ /*draft-11 doesn't say what to return in spp_flags*/
+ params.spp_flags = sp->param_flags;
+ }
-done:
if (copy_to_user(optval, ¶ms, len))
return -EFAULT;
projects / mv-sheeva.git / blobdiff