From: Florian Fainelli <florian@openwrt.org>
Date: Sun, 31 Oct 2010 22:49:58 +0000 (+0100)
Subject: MIPS: AR7: Fix loops per jiffies on TNETD7200 devices
X-Git-Url: https://git.karo-electronics.de/?p=mv-sheeva.git;a=commitdiff_plain;h=0bc6791707694c77b3543de39f77972a65de917a

MIPS: AR7: Fix loops per jiffies on TNETD7200 devices

TNETD7200 run their CPU clock faster than the default CPU clock we assume.
In order to have the correct loops per jiffies settings, initialize clocks right
before setting mips_hpt_frequency. As a side effect, we can no longer use
msleep in clocks.c which requires other parts of the kernel to be initialized,
so replace these with mdelay.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1749/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index fc0e7154e8d..2ca4ada1c29 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
 
 	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
-	msleep(1);
+	mdelay(1);
 	writel(4, &clock->pll);
 	while (readl(&clock->pll) & PLL_STATUS)
 		;
 	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
-	msleep(75);
+	mdelay(75);
 }
 
 static void __init tnetd7300_init_clocks(void)
@@ -456,7 +456,7 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
 	case AR7_CHIP_7100:
@@ -472,7 +472,4 @@ int __init ar7_init_clocks(void)
 	}
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
-
-	return 0;
 }
-arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index 5fb8a013408..22c93213b23 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -30,6 +30,9 @@ void __init plat_time_init(void)
 {
 	struct clk *cpu_clk;
 
+	/* Initialize ar7 clocks so the CPU clock frequency is correct */
+	ar7_init_clocks();
+
 	cpu_clk = clk_get(NULL, "cpu");
 	if (IS_ERR(cpu_clk)) {
 		printk(KERN_ERR "unable to get cpu clock\n");
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 31c7ff53983..07d3fadb244 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -201,5 +201,6 @@ static inline void ar7_device_off(u32 bit)
 }
 
 int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
 
 #endif /* __AR7_H__ */