From: Maxim Levitsky Date: Fri, 15 Oct 2010 15:20:46 +0000 (+0200) Subject: mtd: r852: remove useless pci powerup/down from suspend/resume routines X-Git-Url: https://git.karo-electronics.de/?p=mv-sheeva.git;a=commitdiff_plain;h=9bf70717a589b4b7f866d733b48554a04ea4f6e8 mtd: r852: remove useless pci powerup/down from suspend/resume routines It turns out that pci core now handles these, so this code is redundant and can even cause bugs Signed-off-by: Maxim Levitsky Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 5169ca6a66b..d9d7efbc77c 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -757,11 +757,6 @@ static irqreturn_t r852_irq(int irq, void *data) spin_lock_irqsave(&dev->irqlock, flags); - /* We can recieve shared interrupt while pci is suspended - in that case reads will return 0xFFFFFFFF.... */ - if (dev->insuspend) - goto out; - /* handle card detection interrupts first */ card_status = r852_read_reg(dev, R852_CARD_IRQ_STA); r852_write_reg(dev, R852_CARD_IRQ_STA, card_status); @@ -1035,7 +1030,6 @@ void r852_shutdown(struct pci_dev *pci_dev) int r852_suspend(struct device *device) { struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); - unsigned long flags; if (dev->ctlreg & R852_CTL_CARDENABLE) return -EBUSY; @@ -1047,43 +1041,22 @@ int r852_suspend(struct device *device) r852_disable_irqs(dev); r852_engine_disable(dev); - spin_lock_irqsave(&dev->irqlock, flags); - dev->insuspend = 1; - spin_unlock_irqrestore(&dev->irqlock, flags); - - /* At that point, even if interrupt handler is running, it will quit */ - /* So wait for this to happen explictly */ - synchronize_irq(dev->irq); - /* If card was pulled off just during the suspend, which is very unlikely, we will remove it on resume, it too late now anyway... */ dev->card_unstable = 0; - - pci_save_state(to_pci_dev(device)); - return pci_prepare_to_sleep(to_pci_dev(device)); + return 0; } int r852_resume(struct device *device) { struct r852_device *dev = pci_get_drvdata(to_pci_dev(device)); - unsigned long flags; - - /* Turn on the hardware */ - pci_back_from_sleep(to_pci_dev(device)); - pci_restore_state(to_pci_dev(device)); r852_disable_irqs(dev); r852_card_update_present(dev); r852_engine_disable(dev); - /* Now its safe for IRQ to run */ - spin_lock_irqsave(&dev->irqlock, flags); - dev->insuspend = 0; - spin_unlock_irqrestore(&dev->irqlock, flags); - - /* If card status changed, just do the work */ if (dev->card_detected != dev->card_registred) { dbg("card was %s during low power state", @@ -1121,7 +1094,6 @@ MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl); SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume); - static struct pci_driver r852_pci_driver = { .name = DRV_NAME, .id_table = r852_pci_id_tbl, diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h index 8096cc280c7..e6a21d9d22c 100644 --- a/drivers/mtd/nand/r852.h +++ b/drivers/mtd/nand/r852.h @@ -140,8 +140,6 @@ struct r852_device { /* interrupt handling */ spinlock_t irqlock; /* IRQ protecting lock */ int irq; /* irq num */ - int insuspend; /* device is suspended */ - /* misc */ void *tmp_buffer; /* temporary buffer */ uint8_t ctlreg; /* cached contents of control reg */