1 /* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
3 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
4 * http://www.samsung.com/
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/serial_core.h>
12 #include <linux/gpio.h>
13 #include <linux/mmc/host.h>
14 #include <linux/platform_device.h>
15 #include <linux/smsc911x.h>
18 #include <asm/mach/arch.h>
19 #include <asm/mach-types.h>
21 #include <plat/regs-serial.h>
22 #include <plat/s5pv310.h>
24 #include <plat/devs.h>
25 #include <plat/sdhci.h>
28 #include <mach/regs-srom.h>
30 /* Following are default values for UCON, ULCON and UFCON UART registers */
31 #define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
32 S3C2410_UCON_RXILEVEL | \
33 S3C2410_UCON_TXIRQMODE | \
34 S3C2410_UCON_RXIRQMODE | \
35 S3C2410_UCON_RXFIFO_TOI | \
36 S3C2443_UCON_RXERR_IRQEN)
38 #define SMDKC210_ULCON_DEFAULT S3C2410_LCON_CS8
40 #define SMDKC210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
41 S5PV210_UFCON_TXTRIG4 | \
42 S5PV210_UFCON_RXTRIG4)
44 static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
48 .ucon = SMDKC210_UCON_DEFAULT,
49 .ulcon = SMDKC210_ULCON_DEFAULT,
50 .ufcon = SMDKC210_UFCON_DEFAULT,
55 .ucon = SMDKC210_UCON_DEFAULT,
56 .ulcon = SMDKC210_ULCON_DEFAULT,
57 .ufcon = SMDKC210_UFCON_DEFAULT,
62 .ucon = SMDKC210_UCON_DEFAULT,
63 .ulcon = SMDKC210_ULCON_DEFAULT,
64 .ufcon = SMDKC210_UFCON_DEFAULT,
69 .ucon = SMDKC210_UCON_DEFAULT,
70 .ulcon = SMDKC210_ULCON_DEFAULT,
71 .ufcon = SMDKC210_UFCON_DEFAULT,
75 static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
76 .cd_type = S3C_SDHCI_CD_GPIO,
77 .ext_cd_gpio = S5PV310_GPK0(2),
78 .ext_cd_gpio_invert = 1,
79 .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
80 #ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
82 .host_caps = MMC_CAP_8_BIT_DATA,
86 static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
87 .cd_type = S3C_SDHCI_CD_GPIO,
88 .ext_cd_gpio = S5PV310_GPK0(2),
89 .ext_cd_gpio_invert = 1,
90 .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
93 static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
94 .cd_type = S3C_SDHCI_CD_GPIO,
95 .ext_cd_gpio = S5PV310_GPK2(2),
96 .ext_cd_gpio_invert = 1,
97 .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
98 #ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
100 .host_caps = MMC_CAP_8_BIT_DATA,
104 static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
105 .cd_type = S3C_SDHCI_CD_GPIO,
106 .ext_cd_gpio = S5PV310_GPK2(2),
107 .ext_cd_gpio_invert = 1,
108 .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
111 static struct resource smdkc210_smsc911x_resources[] = {
113 .start = S5PV310_PA_SROM_BANK(1),
114 .end = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
115 .flags = IORESOURCE_MEM,
118 .start = IRQ_EINT(5),
120 .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
124 static struct smsc911x_platform_config smsc9215_config = {
125 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
126 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
127 .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
128 .phy_interface = PHY_INTERFACE_MODE_MII,
129 .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
132 static struct platform_device smdkc210_smsc911x = {
135 .num_resources = ARRAY_SIZE(smdkc210_smsc911x_resources),
136 .resource = smdkc210_smsc911x_resources,
138 .platform_data = &smsc9215_config,
142 static struct platform_device *smdkc210_devices[] __initdata = {
152 static void __init smdkc210_smsc911x_init(void)
156 /* configure nCS1 width to 16 bits */
157 cs1 = __raw_readl(S5PV310_SROM_BW) &
158 ~(S5PV310_SROM_BW__CS_MASK <<
159 S5PV310_SROM_BW__NCS1__SHIFT);
160 cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
161 (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
162 (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
163 S5PV310_SROM_BW__NCS1__SHIFT;
164 __raw_writel(cs1, S5PV310_SROM_BW);
166 /* set timing for nCS1 suitable for ethernet chip */
167 __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
168 (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
169 (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
170 (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
171 (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
172 (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
173 (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
176 static void __init smdkc210_map_io(void)
178 s5p_init_io(NULL, 0, S5P_VA_CHIPID);
179 s3c24xx_init_clocks(24000000);
180 s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
183 static void __init smdkc210_machine_init(void)
185 smdkc210_smsc911x_init();
187 s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
188 s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
189 s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
190 s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
192 platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
195 MACHINE_START(SMDKC210, "SMDKC210")
196 /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
197 .boot_params = S5P_PA_SDRAM + 0x100,
198 .init_irq = s5pv310_init_irq,
199 .map_io = smdkc210_map_io,
200 .init_machine = smdkc210_machine_init,
201 .timer = &s5pv310_timer,