]> git.karo-electronics.de Git - mv-sheeva.git/blob - arch/arm/mach-s5pv310/mach-smdkc210.c
2b8d4fc52d7c8637e051784e0968bfa1aac8ac7b
[mv-sheeva.git] / arch / arm / mach-s5pv310 / mach-smdkc210.c
1 /* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
2  *
3  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
4  *              http://www.samsung.com/
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9 */
10
11 #include <linux/serial_core.h>
12 #include <linux/gpio.h>
13 #include <linux/mmc/host.h>
14 #include <linux/platform_device.h>
15 #include <linux/smsc911x.h>
16 #include <linux/io.h>
17
18 #include <asm/mach/arch.h>
19 #include <asm/mach-types.h>
20
21 #include <plat/regs-serial.h>
22 #include <plat/s5pv310.h>
23 #include <plat/cpu.h>
24 #include <plat/devs.h>
25 #include <plat/sdhci.h>
26
27 #include <mach/map.h>
28 #include <mach/regs-srom.h>
29
30 /* Following are default values for UCON, ULCON and UFCON UART registers */
31 #define SMDKC210_UCON_DEFAULT   (S3C2410_UCON_TXILEVEL |        \
32                                  S3C2410_UCON_RXILEVEL |        \
33                                  S3C2410_UCON_TXIRQMODE |       \
34                                  S3C2410_UCON_RXIRQMODE |       \
35                                  S3C2410_UCON_RXFIFO_TOI |      \
36                                  S3C2443_UCON_RXERR_IRQEN)
37
38 #define SMDKC210_ULCON_DEFAULT  S3C2410_LCON_CS8
39
40 #define SMDKC210_UFCON_DEFAULT  (S3C2410_UFCON_FIFOMODE |       \
41                                  S5PV210_UFCON_TXTRIG4 |        \
42                                  S5PV210_UFCON_RXTRIG4)
43
44 static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
45         [0] = {
46                 .hwport         = 0,
47                 .flags          = 0,
48                 .ucon           = SMDKC210_UCON_DEFAULT,
49                 .ulcon          = SMDKC210_ULCON_DEFAULT,
50                 .ufcon          = SMDKC210_UFCON_DEFAULT,
51         },
52         [1] = {
53                 .hwport         = 1,
54                 .flags          = 0,
55                 .ucon           = SMDKC210_UCON_DEFAULT,
56                 .ulcon          = SMDKC210_ULCON_DEFAULT,
57                 .ufcon          = SMDKC210_UFCON_DEFAULT,
58         },
59         [2] = {
60                 .hwport         = 2,
61                 .flags          = 0,
62                 .ucon           = SMDKC210_UCON_DEFAULT,
63                 .ulcon          = SMDKC210_ULCON_DEFAULT,
64                 .ufcon          = SMDKC210_UFCON_DEFAULT,
65         },
66         [3] = {
67                 .hwport         = 3,
68                 .flags          = 0,
69                 .ucon           = SMDKC210_UCON_DEFAULT,
70                 .ulcon          = SMDKC210_ULCON_DEFAULT,
71                 .ufcon          = SMDKC210_UFCON_DEFAULT,
72         },
73 };
74
75 static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
76         .cd_type                = S3C_SDHCI_CD_GPIO,
77         .ext_cd_gpio            = S5PV310_GPK0(2),
78         .ext_cd_gpio_invert     = 1,
79         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
80 #ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
81         .max_width              = 8,
82         .host_caps              = MMC_CAP_8_BIT_DATA,
83 #endif
84 };
85
86 static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
87         .cd_type                = S3C_SDHCI_CD_GPIO,
88         .ext_cd_gpio            = S5PV310_GPK0(2),
89         .ext_cd_gpio_invert     = 1,
90         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
91 };
92
93 static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
94         .cd_type                = S3C_SDHCI_CD_GPIO,
95         .ext_cd_gpio            = S5PV310_GPK2(2),
96         .ext_cd_gpio_invert     = 1,
97         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
98 #ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
99         .max_width              = 8,
100         .host_caps              = MMC_CAP_8_BIT_DATA,
101 #endif
102 };
103
104 static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
105         .cd_type                = S3C_SDHCI_CD_GPIO,
106         .ext_cd_gpio            = S5PV310_GPK2(2),
107         .ext_cd_gpio_invert     = 1,
108         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
109 };
110
111 static struct resource smdkc210_smsc911x_resources[] = {
112         [0] = {
113                 .start  = S5PV310_PA_SROM_BANK(1),
114                 .end    = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
115                 .flags  = IORESOURCE_MEM,
116         },
117         [1] = {
118                 .start  = IRQ_EINT(5),
119                 .end    = IRQ_EINT(5),
120                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
121         },
122 };
123
124 static struct smsc911x_platform_config smsc9215_config = {
125         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
126         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
127         .flags          = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
128         .phy_interface  = PHY_INTERFACE_MODE_MII,
129         .mac            = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
130 };
131
132 static struct platform_device smdkc210_smsc911x = {
133         .name           = "smsc911x",
134         .id             = -1,
135         .num_resources  = ARRAY_SIZE(smdkc210_smsc911x_resources),
136         .resource       = smdkc210_smsc911x_resources,
137         .dev            = {
138                 .platform_data  = &smsc9215_config,
139         },
140 };
141
142 static struct platform_device *smdkc210_devices[] __initdata = {
143         &s3c_device_hsmmc0,
144         &s3c_device_hsmmc1,
145         &s3c_device_hsmmc2,
146         &s3c_device_hsmmc3,
147         &s3c_device_rtc,
148         &s3c_device_wdt,
149         &smdkc210_smsc911x,
150 };
151
152 static void __init smdkc210_smsc911x_init(void)
153 {
154         u32 cs1;
155
156         /* configure nCS1 width to 16 bits */
157         cs1 = __raw_readl(S5PV310_SROM_BW) &
158                     ~(S5PV310_SROM_BW__CS_MASK <<
159                                     S5PV310_SROM_BW__NCS1__SHIFT);
160         cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
161                 (1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
162                 (1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
163                 S5PV310_SROM_BW__NCS1__SHIFT;
164         __raw_writel(cs1, S5PV310_SROM_BW);
165
166         /* set timing for nCS1 suitable for ethernet chip */
167         __raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
168                      (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
169                      (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
170                      (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
171                      (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
172                      (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
173                      (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
174 }
175
176 static void __init smdkc210_map_io(void)
177 {
178         s5p_init_io(NULL, 0, S5P_VA_CHIPID);
179         s3c24xx_init_clocks(24000000);
180         s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
181 }
182
183 static void __init smdkc210_machine_init(void)
184 {
185         smdkc210_smsc911x_init();
186
187         s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
188         s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
189         s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
190         s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
191
192         platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
193 }
194
195 MACHINE_START(SMDKC210, "SMDKC210")
196         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
197         .boot_params    = S5P_PA_SDRAM + 0x100,
198         .init_irq       = s5pv310_init_irq,
199         .map_io         = smdkc210_map_io,
200         .init_machine   = smdkc210_machine_init,
201         .timer          = &s5pv310_timer,
202 MACHINE_END