--- /dev/null
+//==========================================================================
+//
+// soc_misc.c
+//
+// HAL misc board support code
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//========================================================================*/
+
+#include <redboot.h>
+#include <pkgconf/hal.h>
+#include <pkgconf/system.h>
+#include CYGBLD_HAL_PLATFORM_H
+
+#include <cyg/infra/cyg_type.h> // base types
+#include <cyg/infra/cyg_trac.h> // tracing macros
+#include <cyg/infra/cyg_ass.h> // assertion macros
+
+#include <cyg/hal/hal_misc.h> // Size constants
+#include <cyg/hal/hal_io.h> // IO macros
+#include <cyg/hal/hal_arch.h> // Register state info
+#include <cyg/hal/hal_diag.h>
+#include <cyg/hal/hal_intr.h> // Interrupt names
+#include <cyg/hal/hal_cache.h> // Cache control
+#include <cyg/hal/hal_soc.h> // Hardware definitions
+#include <cyg/hal/hal_mm.h> // MMap table definitions
+
+#include <cyg/infra/diag.h> // diag_printf
+
+// Most initialization has already been done before we get here.
+// All we do here is set up the interrupt environment.
+// FIXME: some of the stuff in hal_platform_setup could be moved here.
+
+externC void plf_hardware_init(void);
+
+#define IIM_PROD_REV_SH 3
+#define IIM_PROD_REV_LEN 5
+#define IIM_SREV_REV_SH 4
+#define IIM_SREV_REV_LEN 4
+
+#define PROD_SIGNATURE_MX35 0x1
+
+#define PROD_SIGNATURE_SUPPORTED_1 PROD_SIGNATURE_MX35
+
+#define CHIP_VERSION_NONE 0xFFFFFFFF // invalid product ID
+#define CHIP_VERSION_UNKNOWN 0xDEADBEEF // invalid chip rev
+
+#define PART_NUMBER_OFFSET (12)
+#define MAJOR_NUMBER_OFFSET (4)
+#define MINOR_NUMBER_OFFSET (0)
+
+/*
+ * System_rev will have the following format
+ * 31-12 = part # (0x31, 0x32, 0x27, 0x91131, 0x91321, 0x35, etc)
+ * 11-8 = unused
+ * 7-4 = major (1.y)
+ * 3-0 = minor (x.0)
+ */
+unsigned int system_rev = CHIP_REV_1_0;
+static int find_correct_chip;
+extern char HAL_PLATFORM_EXTRA[55];
+
+/*
+ * This functions reads the IIM module and returns the system revision number.
+ * It returns the IIM silicon revision reg value if valid product rev is found.
+ . Otherwise, it returns -1.
+ */
+static int read_system_rev(void)
+{
+ int val;
+
+ system_rev = 0x35 << PART_NUMBER_OFFSET; /* For MX35 Platform*/
+
+ /* get silicon id */
+ val = readl(ROM_BASE_ADDR_VIRT + ROM_SI_REV_OFFSET) & 0xF;
+ system_rev |= val << 4;
+
+ /* Now trying to retrieve the silicon rev from IIM's SREV register */
+ return val;
+}
+
+extern nfc_setup_func_t *nfc_setup;
+unsigned int mxc_nfc_soc_setup(unsigned int pg_sz, unsigned int io_sz,
+ unsigned int is_mlc, unsigned int num_of_chips);
+void hal_hardware_init(void)
+{
+ int ver = read_system_rev();
+ find_correct_chip = ver;
+
+ if (ver != CHIP_VERSION_NONE) {
+ /* use the version from the ROM code. */
+ if (ver == 0x1) {
+ HAL_PLATFORM_EXTRA[5] = '1';
+ HAL_PLATFORM_EXTRA[7] = '0';
+ } else if (ver == 0x2) {
+ HAL_PLATFORM_EXTRA[5] = '2';
+ HAL_PLATFORM_EXTRA[7] = '0';
+ } else {
+ find_correct_chip = CHIP_VERSION_UNKNOWN;
+ }
+ }
+
+ // Mask all interrupts
+ writel(0xFFFFFFFF, AVIC_NIMASK);
+
+ // Make all interrupts do IRQ and not FIQ
+ // FIXME: Change this if you use FIQs.
+ writel(0, AVIC_INTTYPEH);
+ writel(0, AVIC_INTTYPEL);
+
+ // Enable caches
+ HAL_ICACHE_ENABLE();
+ HAL_DCACHE_ENABLE();
+
+ // enable EPIT and start it with 32KHz input clock
+ writel(0x00010000, EPIT_BASE_ADDR + EPITCR);
+
+ // make sure reset is complete
+ while ((readl(EPIT_BASE_ADDR + EPITCR) & 0x10000) != 0) {
+ }
+
+ writel(0x030E0002, EPIT_BASE_ADDR + EPITCR);
+ writel(0x030E0003, EPIT_BASE_ADDR + EPITCR);
+
+ writel(0, EPIT_BASE_ADDR + EPITCMPR); // always compare with 0
+
+ if ((readw(WDOG_BASE_ADDR) & 4) != 0) {
+ // increase the WDOG timeout value to the max
+ writew(readw(WDOG_BASE_ADDR) | 0xFF00, WDOG_BASE_ADDR);
+ }
+
+ // Perform any platform specific initializations
+ plf_hardware_init();
+
+ // Set up eCos/ROM interfaces
+ hal_if_init();
+
+#if CYGHWR_DEVS_FLASH_MXC_NAND
+ nfc_setup = (nfc_setup_func_t*)mxc_nfc_soc_setup;
+#endif
+}
+
+// -------------------------------------------------------------------------
+void hal_clock_initialize(cyg_uint32 period)
+{
+}
+
+// This routine is called during a clock interrupt.
+
+// Define this if you want to ensure that the clock is perfect (i.e. does
+// not drift). One reason to leave it turned off is that it costs some
+// us per system clock interrupt for this maintenance.
+#undef COMPENSATE_FOR_CLOCK_DRIFT
+
+void hal_clock_reset(cyg_uint32 vector, cyg_uint32 period)
+{
+}
+
+// Read the current value of the clock, returning the number of hardware
+// "ticks" that have occurred (i.e. how far away the current value is from
+// the start)
+
+// Note: The "contract" for this function is that the value is the number
+// of hardware clocks that have happened since the last interrupt (i.e.
+// when it was reset). This value is used to measure interrupt latencies.
+// However, since the hardware counter runs freely, this routine computes
+// the difference between the current clock period and the number of hardware
+// ticks left before the next timer interrupt.
+void hal_clock_read(cyg_uint32 *pvalue)
+{
+}
+
+// This is to cope with the test read used by tm_basic with
+// CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY defined; we read the count ASAP
+// in the ISR, *before* resetting the clock. Which returns 1tick +
+// latency if we just use plain hal_clock_read().
+void hal_clock_latency(cyg_uint32 *pvalue)
+{
+}
+
+unsigned int hal_timer_count(void)
+{
+ return (0xFFFFFFFF - readl(EPIT_BASE_ADDR + EPITCNR));
+}
+
+#define WDT_MAGIC_1 0x5555
+#define WDT_MAGIC_2 0xAAAA
+#define MXC_WDT_WSR 0x2
+
+unsigned int i2c_base_addr[] = {
+ I2C_BASE_ADDR,
+ I2C2_BASE_ADDR,
+ I2C3_BASE_ADDR
+};
+unsigned int i2c_num = 3;
+
+static unsigned int led_on = 0;
+//
+// Delay for some number of micro-seconds
+//
+void hal_delay_us(unsigned int usecs)
+{
+ /*
+ * This causes overflow.
+ * unsigned int delayCount = (usecs * 32000) / 1000000;
+ * So use the following one instead
+ */
+ unsigned int delayCount = (usecs*4 + 124) / 125;
+
+ if (delayCount == 0) {
+ return;
+ }
+
+ // issue the service sequence instructions
+ if ((readw(WDOG_BASE_ADDR) & 4) != 0) {
+ writew(WDT_MAGIC_1, WDOG_BASE_ADDR + MXC_WDT_WSR);
+ writew(WDT_MAGIC_2, WDOG_BASE_ADDR + MXC_WDT_WSR);
+ }
+
+ writel(0x01, EPIT_BASE_ADDR + EPITSR); // clear the compare status bit
+
+ writel(delayCount, EPIT_BASE_ADDR + EPITLR);
+
+ while ((0x1 & readl(EPIT_BASE_ADDR + EPITSR)) == 0); // return until compare bit is set
+ if ((++led_on % 2000) == 0)
+ BOARD_DEBUG_LED(0);
+}
+
+// -------------------------------------------------------------------------
+
+// This routine is called to respond to a hardware interrupt (IRQ). It
+// should interrogate the hardware and return the IRQ vector number.
+int hal_IRQ_handler(void)
+{
+#ifdef HAL_EXTENDED_IRQ_HANDLER
+ cyg_uint32 index;
+
+ // Use platform specific IRQ handler, if defined
+ // Note: this macro should do a 'return' with the appropriate
+ // interrupt number if such an extended interrupt exists. The
+ // assumption is that the line after the macro starts 'normal' processing.
+ HAL_EXTENDED_IRQ_HANDLER(index);
+#endif
+
+ return CYGNUM_HAL_INTERRUPT_NONE; // This shouldn't happen!
+}
+
+//
+// Interrupt control
+//
+
+void hal_interrupt_mask(int vector)
+{
+// diag_printf("6hal_interrupt_mask(vector=%d) \n", vector);
+#ifdef HAL_EXTENDED_INTERRUPT_MASK
+ // Use platform specific handling, if defined
+ // Note: this macro should do a 'return' for "extended" values of 'vector'
+ // Normal vectors are handled by code subsequent to the macro call.
+ HAL_EXTENDED_INTERRUPT_MASK(vector);
+#endif
+}
+
+void hal_interrupt_unmask(int vector)
+{
+// diag_printf("7hal_interrupt_unmask(vector=%d) \n", vector);
+
+#ifdef HAL_EXTENDED_INTERRUPT_UNMASK
+ // Use platform specific handling, if defined
+ // Note: this macro should do a 'return' for "extended" values of 'vector'
+ // Normal vectors are handled by code subsequent to the macro call.
+ HAL_EXTENDED_INTERRUPT_UNMASK(vector);
+#endif
+}
+
+void hal_interrupt_acknowledge(int vector)
+{
+
+// diag_printf("8hal_interrupt_acknowledge(vector=%d) \n", vector);
+#ifdef HAL_EXTENDED_INTERRUPT_UNMASK
+ // Use platform specific handling, if defined
+ // Note: this macro should do a 'return' for "extended" values of 'vector'
+ // Normal vectors are handled by code subsequent to the macro call.
+ HAL_EXTENDED_INTERRUPT_ACKNOWLEDGE(vector);
+#endif
+}
+
+void hal_interrupt_configure(int vector, int level, int up)
+{
+
+#ifdef HAL_EXTENDED_INTERRUPT_CONFIGURE
+ // Use platform specific handling, if defined
+ // Note: this macro should do a 'return' for "extended" values of 'vector'
+ // Normal vectors are handled by code subsequent to the macro call.
+ HAL_EXTENDED_INTERRUPT_CONFIGURE(vector, level, up);
+#endif
+}
+
+void hal_interrupt_set_level(int vector, int level)
+{
+
+#ifdef HAL_EXTENDED_INTERRUPT_SET_LEVEL
+ // Use platform specific handling, if defined
+ // Note: this macro should do a 'return' for "extended" values of 'vector'
+ // Normal vectors are handled by code subsequent to the macro call.
+ HAL_EXTENDED_INTERRUPT_SET_LEVEL(vector, level);
+#endif
+
+ // Interrupt priorities are not configurable.
+}
+
+unsigned int mxc_nfc_soc_setup(unsigned int pg_sz, unsigned int io_sz, unsigned int is_mlc, unsigned int num_of_chips)
+{
+ unsigned int tmp ;
+ if (is_mlc) {
+ tmp = readw(NAND_REG_BASE + NAND_FLASH_CONFIG1_REG_OFF) | (1 << 8);
+ } else {
+ tmp = readw(NAND_REG_BASE + NAND_FLASH_CONFIG1_REG_OFF) & (~(1 << 8));
+ }
+
+ writew(tmp, NAND_REG_BASE + NAND_FLASH_CONFIG1_REG_OFF);
+ tmp = readl(CCM_BASE_ADDR + CLKCTL_RCSR);
+ if (io_sz == 16) {
+ tmp |= (1 << 14);
+ } else {
+ tmp &= (~(1 << 14));
+ }
+
+ tmp &= ~(3<<8);
+ switch(pg_sz = 2048){
+ case 2048:
+ tmp |= (1<<8);
+ break;
+ case 4096:
+ tmp |= (1<<9);
+ break;
+ }
+
+ writel(tmp, CCM_BASE_ADDR + CLKCTL_RCSR);
+ diag_printf("NAND: RCSR=%x\n", tmp);
+ return 0x10;
+}
+
+static void check_reset_source(void)
+{
+ unsigned int source=readl(CCM_BASE_ADDR + CLKCTL_RCSR);
+ switch(source & 0xF) {
+ case 0x0:
+ diag_printf("hardware reset by POR\n");
+ break;
+ case 0x2:
+ diag_printf("hardware reset by JTAG\n");
+ break;
+ case 0x4:
+ diag_printf("hardware reset by qualified external reset\n");
+ break;
+ case 0x8:
+ diag_printf("hardware reset by watchdog\n");
+ break;
+ default:
+ diag_printf("hardware reset by unknow source\n");
+ }
+}
+
+RedBoot_init(check_reset_source, RedBoot_INIT_LAST);
+
+static void check_correct_chip(void)
+{
+ if (find_correct_chip == CHIP_VERSION_UNKNOWN) {
+ diag_printf("Unrecognized chip version: 0x%x!!!\n", read_system_rev());
+ diag_printf("Assuming chip version=0x%x\n", system_rev);
+ } else if (find_correct_chip == CHIP_VERSION_NONE) {
+ diag_printf("Unrecognized chip: 0x%x!!!\n", readl(IIM_BASE_ADDR + IIM_PREV_OFF));
+ }
+}
+
+RedBoot_init(check_correct_chip, RedBoot_INIT_LAST);