]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules
authorLothar Waßmann <LW@KARO-electronics.de>
Fri, 12 Feb 2016 13:27:01 +0000 (14:27 +0100)
committerLothar Waßmann <LW@KARO-electronics.de>
Fri, 12 Feb 2016 13:27:01 +0000 (14:27 +0100)
The TXUL-0010/-0011 modules are Computers On Module manufactured by
  Ka-Ro electronics GmbH with the following characteristics:
  Processor    Freescale i.MX 6UltraLite MCIMX6G2, 528 MHz
  RAM          256MB 16-bit DDR3 SDRAM
  ROM          128MB NAND Flash (TXUL-0010) / 4GB eMMC (TXUL-0011)
  Power supply Single 3.3 to 5V
  Size         26mm SO-DIMM
  Temp. Range  -40°C to 85°C

arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6ul-tx6ul-0010.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6ul-tx6ul-0011.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6ul-tx6ul.dtsi [new file with mode: 0644]

index b0726b5e3f8fd7d3c74609d7426dc642dc8610f9..5a33c0a715179f8e6ca8c8d6638d034d51d80892 100644 (file)
@@ -364,7 +364,9 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
        imx6sx-sdb-reva.dtb \
        imx6sx-sdb.dtb
 dtb-$(CONFIG_SOC_IMX6UL) += \
-       imx6ul-14x14-evk.dtb
+       imx6ul-14x14-evk.dtb \
+       imx6ul-tx6ul-0010.dtb \
+       imx6ul-tx6ul-0011.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
        imx7d-cl-som-imx7.dtb \
        imx7d-sbc-imx7.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0010.dts
new file mode 100644 (file)
index 0000000..9e49c12
--- /dev/null
@@ -0,0 +1,54 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+       model = "Ka-Ro electronics TXUL-0010 Module";
+       compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+       aliases {
+               mmc0 = &usdhc1;
+               /delete-property/ mmc1;
+       };
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts b/arch/arm/boot/dts/imx6ul-tx6ul-0011.dts
new file mode 100644 (file)
index 0000000..d82698e
--- /dev/null
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6ul.dtsi"
+#include "imx6ul-tx6ul.dtsi"
+
+/ {
+       model = "Ka-Ro electronics TXUL-0011 Module";
+       compatible = "karo,imx6ul-tx6ul", "fsl,imx6ul";
+
+       aliases {
+               mmc0 = &usdhc2;
+               mmc1 = &usdhc1;
+       };
+};
+
+&gpmi {
+       status = "disabled";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       bus-width = <4>;
+       no-1-8-v;
+       non-removable;
+       fsl,wp-controller;
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
new file mode 100644 (file)
index 0000000..2eb7260
--- /dev/null
@@ -0,0 +1,977 @@
+/*
+ * Copyright 2015 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+       aliases {
+               can0 = &can2;
+               can1 = &can1;
+               display = &display;
+               i2c0 = &i2c2;
+               i2c1 = &i2c_gpio;
+               i2c2 = &i2c1;
+               i2c3 = &i2c3;
+               i2c4 = &i2c4;
+               lcdif_23bit_pins_a = &pinctrl_disp0_1;
+               lcdif_24bit_pins_a = &pinctrl_disp0_2;
+               pwm0 = &pwm5;
+               reg_can_xcvr = &reg_can_xcvr;
+               serial2 = &uart5;
+               serial4 = &uart3;
+               spi0 = &ecspi2;
+               spi1 = &spi_gpio;
+               stk5led = &user_led;
+               usbh1 = &usbotg2;
+               usbotg = &usbotg1;
+       };
+
+       chosen {
+               stdout-path = &uart1;
+       };
+
+       memory {
+               reg = <0 0>; /* will be filled by U-Boot */
+       };
+
+       clocks {
+               mclk: mclk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <26000000>;
+               };
+       };
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_lcd_rst>;
+               enable-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+               pwms = <&pwm5 0 500000 PWM_POLARITY_INVERTED>;
+               power-supply = <&reg_lcd_pwr>;
+               /*
+                * a poor man's way to create a 1:1 relationship between
+                * the PWM value and the actual duty cycle
+                */
+               brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+                                    10 11 12 13 14 15 16 17 18 19
+                                    20 21 22 23 24 25 26 27 28 29
+                                    30 31 32 33 34 35 36 37 38 39
+                                    40 41 42 43 44 45 46 47 48 49
+                                    50 51 52 53 54 55 56 57 58 59
+                                    60 61 62 63 64 65 66 67 68 69
+                                    70 71 72 73 74 75 76 77 78 79
+                                    80 81 82 83 84 85 86 87 88 89
+                                    90 91 92 93 94 95 96 97 98 99
+                                   100>;
+               default-brightness-level = <50>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+       };
+
+       i2c_gpio: i2c-gpio {
+               compatible = "i2c-gpio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_i2c_gpio>;
+               gpios = <
+                       &gpio5 1 GPIO_ACTIVE_HIGH /* SDA */
+                       &gpio5 0 GPIO_ACTIVE_HIGH /* SCL */
+               >;
+               clock-frequency = <400000>;
+               status = "okay";
+
+               ds1339: rtc@68 {
+                       compatible = "dallas,ds1339";
+                       reg = <0x68>;
+                       status = "disabled";
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               user_led: user {
+                       label = "Heartbeat";
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_led>;
+                       gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+
+       reg_3v3_etn: regulator-3v3etn {
+               compatible = "regulator-fixed";
+               regulator-name = "3V3_ETN";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_etnphy_power>;
+               gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_2v5: regulator-2v5 {
+               compatible = "regulator-fixed";
+               regulator-name = "2V5";
+               regulator-min-microvolt = <2500000>;
+               regulator-max-microvolt = <2500000>;
+               regulator-always-on;
+       };
+
+       reg_3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "3V3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
+       reg_can_xcvr: regulator-canxcvr {
+               compatible = "regulator-fixed";
+               regulator-name = "CAN XCVR";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_flexcan_xcvr>;
+               gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+               enable-active-low;
+       };
+
+       reg_lcd_pwr: regulator-lcdpwr {
+               compatible = "regulator-fixed";
+               regulator-name = "LCD POWER";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_lcd_pwr>;
+               gpio = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_usbh1_vbus: regulator-usbh1vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usbh1_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usbh1_vbus &pinctrl_usbh1_oc>;
+               gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       reg_usbotg_vbus: regulator-usbotgvbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usbotg_vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usbotg_vbus &pinctrl_usbotg_oc>;
+               gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
+       spi_gpio: spi-gpio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "spi-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_spi_gpio>;
+               gpio-mosi = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+               gpio-miso = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+               gpio-sck = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+               num-chipselects = <2>;
+               cs-gpios = <
+                       &gpio1 29 GPIO_ACTIVE_HIGH
+                       &gpio1 10 GPIO_ACTIVE_HIGH
+               >;
+               status = "disabled";
+
+               spi@0 {
+                       compatible = "spidev";
+                       reg = <0>;
+                       spi-max-frequency = <660000>;
+               };
+
+               spi@1 {
+                       compatible = "spidev";
+                       reg = <1>;
+                       spi-max-frequency = <660000>;
+               };
+       };
+
+       sound {
+               compatible = "karo,imx6ul-tx6ul-sgtl5000",
+                            "simple-audio-card";
+               simple-audio-card,name = "imx6ul-tx6ul-sgtl5000-audio";
+               simple-audio-card,format = "i2s";
+               simple-audio-card,bitclock-master = <&codec_dai>;
+               simple-audio-card,frame-master = <&codec_dai>;
+               simple-audio-card,widgets =
+                       "Microphone", "Mic Jack",
+                       "Line", "Line In",
+                       "Line", "Line Out",
+                       "Headphone", "Headphone Jack";
+               simple-audio-card,routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+
+               cpu_dai: simple-audio-card,cpu {
+                       sound-dai = <&sai2>;
+               };
+
+               codec_dai: simple-audio-card,codec {
+                       sound-dai = <&sgtl5000>;
+               };
+       };
+};
+
+&can1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan1>;
+       xceiver-supply = <&reg_can_xcvr>;
+       status = "okay";
+};
+
+&can2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_flexcan2>;
+       xceiver-supply = <&reg_can_xcvr>;
+       status = "okay";
+};
+
+&ecspi2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi2>;
+       fsl,spi-num-chipselects = <2>;
+       cs-gpios = <
+               &gpio1 29 GPIO_ACTIVE_HIGH
+               &gpio1 10 GPIO_ACTIVE_HIGH
+       >;
+       status = "disabled";
+
+       spidev0: spi@0 {
+               compatible = "spidev";
+               reg = <0>;
+               spi-max-frequency = <60000000>;
+       };
+
+       spidev1: spi@1 {
+               compatible = "spidev";
+               reg = <1>;
+               spi-max-frequency = <60000000>;
+       };
+};
+
+&fec1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
+       phy-mode = "rmii";
+       phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+       phy-supply = <&reg_3v3_etn>;
+       phy-handle = <&etnphy0>;
+       status = "okay";
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               etnphy0: ethernet-phy@0 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_etnphy0_int>;
+                       interrupt-parent = <&gpio5>;
+                       interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+                       status = "okay";
+               };
+
+               etnphy1: ethernet-phy@2 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <2>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_etnphy1_int>;
+                       interrupt-parent = <&gpio4>;
+                       interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+                       status = "okay";
+               };
+       };
+};
+
+&fec2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
+       phy-mode = "rmii";
+       phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+       phy-supply = <&reg_3v3_etn>;
+       phy-handle = <&etnphy1>;
+       status = "disabled";
+};
+
+&gpmi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_gpmi_nand>;
+       nand-on-flash-bbt;
+       fsl,no-blockmark-swap;
+       status = "okay";
+};
+
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       clock-frequency = <400000>;
+       status = "okay";
+
+       sgtl5000: codec@0a {
+               compatible = "fsl,sgtl5000";
+               reg = <0x0a>;
+               #sound-dai-cells = <0>;
+               VDDA-supply = <&reg_2v5>;
+               VDDIO-supply = <&reg_3v3>;
+               clocks = <&mclk>;
+       };
+
+       polytouch: polytouch@38 {
+               compatible = "edt,edt-ft5x06";
+               reg = <0x38>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_edt_ft5x06>;
+               interrupt-parent = <&gpio5>;
+               interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+               reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+               wake-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+               wakeup-source;
+       };
+
+       touchscreen: touchscreen@48 {
+               compatible = "ti,tsc2007";
+               reg = <0x48>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_tsc2007>;
+               interrupt-parent = <&gpio3>;
+               interrupts = <26 IRQ_TYPE_NONE>;
+               gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+               ti,x-plate-ohms = <660>;
+               wakeup-source;
+       };
+};
+
+&kpp {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_kpp>;
+       /* sample keymap */
+       /* row/col 0..3 are mapped to KPP row/col 4..7 */
+       linux,keymap = <
+               MATRIX_KEY(4, 4, KEY_POWER)
+               MATRIX_KEY(4, 5, KEY_KP0)
+               MATRIX_KEY(4, 6, KEY_KP1)
+               MATRIX_KEY(4, 7, KEY_KP2)
+               MATRIX_KEY(5, 4, KEY_KP3)
+               MATRIX_KEY(5, 5, KEY_KP4)
+               MATRIX_KEY(5, 6, KEY_KP5)
+               MATRIX_KEY(5, 7, KEY_KP6)
+               MATRIX_KEY(6, 4, KEY_KP7)
+               MATRIX_KEY(6, 5, KEY_KP8)
+               MATRIX_KEY(6, 6, KEY_KP9)
+       >;
+       status = "okay";
+};
+
+&lcdif {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_disp0_1>;
+       lcd-supply = <&reg_lcd_pwr>;
+       display = <&display>;
+       status = "okay";
+
+       display: display@di0 {
+               bits-per-pixel = <32>;
+               bus-width = <24>;
+               status = "okay";
+
+               display-timings {
+                       VGA {
+                               clock-frequency = <25200000>;
+                               hactive = <640>;
+                               vactive = <480>;
+                               hback-porch = <48>;
+                               hsync-len = <96>;
+                               hfront-porch = <16>;
+                               vback-porch = <31>;
+                               vsync-len = <2>;
+                               vfront-porch = <12>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+
+                       ETV570 {
+                               clock-frequency = <25200000>;
+                               hactive = <640>;
+                               vactive = <480>;
+                               hback-porch = <114>;
+                               hsync-len = <30>;
+                               hfront-porch = <16>;
+                               vback-porch = <32>;
+                               vsync-len = <3>;
+                               vfront-porch = <10>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+
+                       ET0350 {
+                               clock-frequency = <6413760>;
+                               hactive = <320>;
+                               vactive = <240>;
+                               hback-porch = <34>;
+                               hsync-len = <34>;
+                               hfront-porch = <20>;
+                               vback-porch = <15>;
+                               vsync-len = <3>;
+                               vfront-porch = <4>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+
+                       ET0430 {
+                               clock-frequency = <9009000>;
+                               hactive = <480>;
+                               vactive = <272>;
+                               hback-porch = <2>;
+                               hsync-len = <41>;
+                               hfront-porch = <2>;
+                               vback-porch = <2>;
+                               vsync-len = <10>;
+                               vfront-porch = <2>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <0>;
+                       };
+
+                       ET0500 {
+                               clock-frequency = <33264000>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hback-porch = <88>;
+                               hsync-len = <128>;
+                               hfront-porch = <40>;
+                               vback-porch = <33>;
+                               vsync-len = <2>;
+                               vfront-porch = <10>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+
+                       ET0700 { /* same as ET0500 */
+                               clock-frequency = <33264000>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hback-porch = <88>;
+                               hsync-len = <128>;
+                               hfront-porch = <40>;
+                               vback-porch = <33>;
+                               vsync-len = <2>;
+                               vfront-porch = <10>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+
+                       ETQ570 {
+                               clock-frequency = <6596040>;
+                               hactive = <320>;
+                               vactive = <240>;
+                               hback-porch = <38>;
+                               hsync-len = <30>;
+                               hfront-porch = <30>;
+                               vback-porch = <16>;
+                               vsync-len = <3>;
+                               vfront-porch = <4>;
+                               hsync-active = <0>;
+                               vsync-active = <0>;
+                               de-active = <1>;
+                               pixelclk-active = <1>;
+                       };
+               };
+       };
+};
+
+&pwm5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm5>;
+       #pwm-cells = <3>;
+       status = "okay";
+};
+
+&sai2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sai2>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&usbotg1 {
+       vbus-supply = <&reg_usbotg_vbus>;
+       dr_mode = "peripheral";
+       disable-over-current;
+       status = "okay";
+};
+
+&usbotg2 {
+       vbus-supply = <&reg_usbh1_vbus>;
+       dr_mode = "host";
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_usdhc1_cd>;
+       bus-width = <4>;
+       no-1-8-v;
+       cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+       fsl,wp-controller;
+       status = "okay";
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_hog>;
+
+       pinctrl_hog: hoggrp {
+       };
+
+       pinctrl_led: ledgrp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x0b0b0 /* LED */
+               >;
+       };
+
+       pinctrl_disp0_1: disp0grp-1 {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_CLK__LCDIF_CLK            0x10 /* LSCLK */
+                       MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE      0x10 /* OE_ACD */
+                       MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC        0x10 /* HSYNC */
+                       MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC        0x10 /* VSYNC */
+                       /* PAD DISP0_DAT0 is used for the Flexcan transceiver control on STK5-v5 */
+                       MX6UL_PAD_LCD_DATA01__LCDIF_DATA01      0x10
+                       MX6UL_PAD_LCD_DATA02__LCDIF_DATA02      0x10
+                       MX6UL_PAD_LCD_DATA03__LCDIF_DATA03      0x10
+                       MX6UL_PAD_LCD_DATA04__LCDIF_DATA04      0x10
+                       MX6UL_PAD_LCD_DATA05__LCDIF_DATA05      0x10
+                       MX6UL_PAD_LCD_DATA06__LCDIF_DATA06      0x10
+                       MX6UL_PAD_LCD_DATA07__LCDIF_DATA07      0x10
+                       MX6UL_PAD_LCD_DATA08__LCDIF_DATA08      0x10
+                       MX6UL_PAD_LCD_DATA09__LCDIF_DATA09      0x10
+                       MX6UL_PAD_LCD_DATA10__LCDIF_DATA10      0x10
+                       MX6UL_PAD_LCD_DATA11__LCDIF_DATA11      0x10
+                       MX6UL_PAD_LCD_DATA12__LCDIF_DATA12      0x10
+                       MX6UL_PAD_LCD_DATA13__LCDIF_DATA13      0x10
+                       MX6UL_PAD_LCD_DATA14__LCDIF_DATA14      0x10
+                       MX6UL_PAD_LCD_DATA15__LCDIF_DATA15      0x10
+                       MX6UL_PAD_LCD_DATA16__LCDIF_DATA16      0x10
+                       MX6UL_PAD_LCD_DATA17__LCDIF_DATA17      0x10
+                       MX6UL_PAD_LCD_DATA18__LCDIF_DATA18      0x10
+                       MX6UL_PAD_LCD_DATA19__LCDIF_DATA19      0x10
+                       MX6UL_PAD_LCD_DATA20__LCDIF_DATA20      0x10
+                       MX6UL_PAD_LCD_DATA21__LCDIF_DATA21      0x10
+                       MX6UL_PAD_LCD_DATA22__LCDIF_DATA22      0x10
+                       MX6UL_PAD_LCD_DATA23__LCDIF_DATA23      0x10
+               >;
+       };
+
+       pinctrl_disp0_2: disp0grp-2 {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_CLK__LCDIF_CLK            0x10 /* LSCLK */
+                       MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE      0x10 /* OE_ACD */
+                       MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC        0x10 /* HSYNC */
+                       MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC        0x10 /* VSYNC */
+                       MX6UL_PAD_LCD_DATA00__LCDIF_DATA00      0x10
+                       MX6UL_PAD_LCD_DATA01__LCDIF_DATA01      0x10
+                       MX6UL_PAD_LCD_DATA02__LCDIF_DATA02      0x10
+                       MX6UL_PAD_LCD_DATA03__LCDIF_DATA03      0x10
+                       MX6UL_PAD_LCD_DATA04__LCDIF_DATA04      0x10
+                       MX6UL_PAD_LCD_DATA05__LCDIF_DATA05      0x10
+                       MX6UL_PAD_LCD_DATA06__LCDIF_DATA06      0x10
+                       MX6UL_PAD_LCD_DATA07__LCDIF_DATA07      0x10
+                       MX6UL_PAD_LCD_DATA08__LCDIF_DATA08      0x10
+                       MX6UL_PAD_LCD_DATA09__LCDIF_DATA09      0x10
+                       MX6UL_PAD_LCD_DATA10__LCDIF_DATA10      0x10
+                       MX6UL_PAD_LCD_DATA11__LCDIF_DATA11      0x10
+                       MX6UL_PAD_LCD_DATA12__LCDIF_DATA12      0x10
+                       MX6UL_PAD_LCD_DATA13__LCDIF_DATA13      0x10
+                       MX6UL_PAD_LCD_DATA14__LCDIF_DATA14      0x10
+                       MX6UL_PAD_LCD_DATA15__LCDIF_DATA15      0x10
+                       MX6UL_PAD_LCD_DATA16__LCDIF_DATA16      0x10
+                       MX6UL_PAD_LCD_DATA17__LCDIF_DATA17      0x10
+                       MX6UL_PAD_LCD_DATA18__LCDIF_DATA18      0x10
+                       MX6UL_PAD_LCD_DATA19__LCDIF_DATA19      0x10
+                       MX6UL_PAD_LCD_DATA20__LCDIF_DATA20      0x10
+                       MX6UL_PAD_LCD_DATA21__LCDIF_DATA21      0x10
+                       MX6UL_PAD_LCD_DATA22__LCDIF_DATA22      0x10
+                       MX6UL_PAD_LCD_DATA23__LCDIF_DATA23      0x10
+               >;
+       };
+
+       pinctrl_ecspi2: ecspi2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29     0x0b0b0 /* CSPI_SS */
+                       MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0x0b0b0 /* CSPI_SS */
+                       MX6UL_PAD_UART5_TX_DATA__ECSPI2_MOSI    0x0b0b0 /* CSPI_MOSI */
+                       MX6UL_PAD_UART5_RX_DATA__ECSPI2_MISO    0x0b0b0 /* CSPI_MISO */
+                       MX6UL_PAD_UART4_TX_DATA__ECSPI2_SCLK    0x0b0b0 /* CSPI_SCLK */
+               >;
+       };
+
+       pinctrl_edt_ft5x06: edt-ft5x06grp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02      0x1b0b0 /* Interrupt */
+                       MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03      0x1b0b0 /* Reset */
+                       MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08      0x1b0b0 /* Wake */
+               >;
+       };
+
+       pinctrl_enet1: enet1grp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x000b0
+                       MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x000b0
+                       MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x000b0
+                       MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x000b0
+                       MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x000b0
+                       MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x000b0
+                       MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x000b0
+                       MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x400000b1
+               >;
+       };
+
+       pinctrl_enet2: enet2grp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x000b0
+                       MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x000b0
+                       MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN      0x000b0
+                       MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER      0x000b0
+                       MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN      0x000b0
+                       MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x000b0
+                       MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x000b0
+                       MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2  0x400000b1
+               >;
+       };
+
+       pinctrl_enet1_mdio: enet1-mdiogrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x0b0b0
+                       MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+               >;
+       };
+
+       pinctrl_etnphy_power: etnphy-pwrgrp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07      0x0b0b0 /* ETN PHY POWER */
+               >;
+       };
+
+       pinctrl_etnphy0_int: etnphy-intgrp-0 {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05      0x0b0b0 /* ETN PHY INT */
+               >;
+       };
+
+       pinctrl_etnphy0_rst: etnphy-rstgrp-0 {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06      0x0b0b0 /* ETN PHY RESET */
+               >;
+       };
+
+       pinctrl_etnphy1_int: etnphy-intgrp-1 {
+               fsl,pins = <
+                       MX6UL_PAD_CSI_DATA06__GPIO4_IO27        0x0b0b0 /* ETN PHY INT */
+               >;
+       };
+
+       pinctrl_etnphy1_rst: etnphy-rstgrp-1 {
+               fsl,pins = <
+                       MX6UL_PAD_CSI_DATA07__GPIO4_IO28        0x0b0b0 /* ETN PHY RESET */
+               >;
+       };
+
+       pinctrl_flexcan1: flexcan1grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX      0x0b0b0
+                       MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX      0x0b0b0
+               >;
+       };
+
+       pinctrl_flexcan2: flexcan2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX      0x0b0b0
+                       MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX      0x0b0b0
+               >;
+       };
+
+       pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_DATA00__GPIO3_IO05        0x0b0b0 /* Flexcan XCVR enable */
+               >;
+       };
+
+       pinctrl_gpmi_nand: gpminandgrp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_CLE__RAWNAND_CLE         0x0b0b1
+                       MX6UL_PAD_NAND_ALE__RAWNAND_ALE         0x0b0b1
+                       MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B       0x0b0b1
+                       MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x0b000
+                       MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B     0x0b0b1
+                       MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B       0x0b0b1
+                       MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B       0x0b0b1
+                       MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00   0x0b0b1
+                       MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01   0x0b0b1
+                       MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02   0x0b0b1
+                       MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03   0x0b0b1
+                       MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04   0x0b0b1
+                       MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05   0x0b0b1
+                       MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06   0x0b0b1
+                       MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07   0x0b0b1
+               >;
+       };
+
+       pinctrl_i2c_gpio: i2c-gpiogrp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00      0x4001b8b1 /* I2C SCL */
+                       MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01      0x4001b8b1 /* I2C SDA */
+               >;
+       };
+
+       pinctrl_i2c2: i2c2grp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO00__I2C2_SCL          0x4001b8b1
+                       MX6UL_PAD_GPIO1_IO01__I2C2_SDA          0x4001b8b1
+               >;
+       };
+
+       pinctrl_kpp: kppgrp {
+               fsl,pins = <
+                       MX6UL_PAD_ENET2_RX_DATA1__KPP_COL04     0x1b0b0
+                       MX6UL_PAD_ENET2_TX_DATA0__KPP_COL05     0x1b0b0
+                       MX6UL_PAD_ENET2_TX_EN__KPP_COL06        0x1b0b0
+                       MX6UL_PAD_ENET2_RX_ER__KPP_COL07        0x1b0b0
+                       MX6UL_PAD_ENET2_RX_DATA0__KPP_ROW04     0x1b0b0
+                       MX6UL_PAD_ENET2_RX_EN__KPP_ROW05        0x1b0b0
+                       MX6UL_PAD_ENET2_TX_DATA1__KPP_ROW06     0x1b0b0
+                       MX6UL_PAD_ENET2_TX_CLK__KPP_ROW07       0x1b0b0
+               >;
+       };
+
+       pinctrl_lcd_pwr: lcd-pwrgrp {
+               fsl,pins = <
+                       MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04      0x0b0b0 /* LCD Power Enable */
+               >;
+       };
+
+       pinctrl_lcd_rst: lcd-rstgrp {
+               fsl,pins = <
+                       MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0 /* LCD Reset */
+               >;
+       };
+
+       pinctrl_pwm5: pwm5grp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_DQS__PWM5_OUT            0x0b0b0
+               >;
+       };
+
+       pinctrl_sai2: sai2grp {
+               fsl,pins = <
+                       MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA        0x0b0b0 /* SSI1_RXD */
+                       MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA     0x0b0b0 /* SSI1_TXD */
+                       MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK        0x0b0b0 /* SSI1_CLK */
+                       MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC        0x0b0b0 /* SSI1_FS */
+               >;
+       };
+
+       pinctrl_spi_gpio: spi-gpiogrp {
+               fsl,pins = <
+                       MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29     0x0b0b0 /* CSPI_SS */
+                       MX6UL_PAD_JTAG_MOD__GPIO1_IO10          0x0b0b0 /* CSPI_SS */
+                       MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30     0x0b0b0 /* CSPI_MOSI */
+                       MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31     0x0b0b0 /* CSPI_MISO */
+                       MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28     0x0b0b0 /* CSPI_SCLK */
+               >;
+       };
+
+       pinctrl_tsc2007: tsc2007grp {
+               fsl,pins = <
+                       MX6UL_PAD_JTAG_TMS__GPIO1_IO11          0x1b0b0 /* Interrupt */
+               >;
+       };
+
+       pinctrl_uart1: uart1grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX   0x0b0b0
+                       MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX   0x0b0b0
+               >;
+       };
+
+       pinctrl_uart1_rtscts: uart1-rtsctsgrp {
+               fsl,pins = <
+                       MX6UL_PAD_UART1_RTS_B__UART1_DCE_RTS    0x0b0b0
+                       MX6UL_PAD_UART1_CTS_B__UART1_DCE_CTS    0x0b0b0
+               >;
+       };
+
+       pinctrl_uart2: uart2grp {
+               fsl,pins = <
+                       MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX   0x0b0b0
+                       MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX   0x0b0b0
+               >;
+       };
+
+       pinctrl_uart2_rtscts: uart2-rtsctsgrp {
+               fsl,pins = <
+                       MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS  0x0b0b0
+                       MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS  0x0b0b0
+               >;
+       };
+
+       pinctrl_uart5: uart5grp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO04__UART5_DCE_TX      0x0b0b0
+                       MX6UL_PAD_GPIO1_IO05__UART5_DCE_RX      0x0b0b0
+               >;
+       };
+
+       pinctrl_uart5_rtscts: uart5-rtsctsgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS     0x0b0b0
+                       MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS     0x0b0b0
+               >;
+       };
+
+       pinctrl_usbh1_oc: usbh1-ocgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO03__GPIO1_IO03        0x17059 /* USBH1_OC */
+               >;
+       };
+
+       pinctrl_usbh1_vbus: usbh1-vbusgrp {
+               fsl,pins = <
+                       MX6UL_PAD_GPIO1_IO02__GPIO1_IO02        0x0b0b0 /* USBH1_VBUSEN */
+               >;
+       };
+
+       pinctrl_usbotg_oc: usbotg-ocgrp {
+               fsl,pins = <
+                       MX6UL_PAD_UART3_RTS_B__GPIO1_IO27       0x17059 /* USBOTG_OC */
+               >;
+       };
+
+       pinctrl_usbotg_vbus: usbotg-vbusgrp {
+               fsl,pins = <
+                       MX6UL_PAD_UART3_CTS_B__GPIO1_IO26       0x1b0b0 /* USBOTG_VBUSEN */
+               >;
+       };
+
+       pinctrl_usdhc1: usdhc1grp {
+               fsl,pins = <
+                       MX6UL_PAD_SD1_CMD__USDHC1_CMD           0x070b1
+                       MX6UL_PAD_SD1_CLK__USDHC1_CLK           0x07099
+                       MX6UL_PAD_SD1_DATA0__USDHC1_DATA0       0x070b1
+                       MX6UL_PAD_SD1_DATA1__USDHC1_DATA1       0x070b1
+                       MX6UL_PAD_SD1_DATA2__USDHC1_DATA2       0x070b1
+                       MX6UL_PAD_SD1_DATA3__USDHC1_DATA3       0x070b1
+               >;
+       };
+
+       pinctrl_usdhc1_cd: usdhc1cdgrp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_CE1_B__GPIO4_IO14        0x170b0 /* SD1 CD */
+               >;
+       };
+
+       pinctrl_usdhc2: usdhc2grp {
+               fsl,pins = <
+                       MX6UL_PAD_NAND_WE_B__USDHC2_CMD         0x070b1
+                       MX6UL_PAD_NAND_RE_B__USDHC2_CLK         0x070b1
+                       MX6UL_PAD_NAND_DATA00__USDHC2_DATA0     0x070b1
+                       MX6UL_PAD_NAND_DATA01__USDHC2_DATA1     0x070b1
+                       MX6UL_PAD_NAND_DATA02__USDHC2_DATA2     0x070b1
+                       MX6UL_PAD_NAND_DATA03__USDHC2_DATA3     0x070b1
+                       /* eMMC RESET */
+                       MX6UL_PAD_NAND_ALE__USDHC2_RESET_B      0x170b0
+               >;
+       };
+};