Jan Glauber [Thu, 30 Mar 2017 15:31:28 +0000 (17:31 +0200)]
MAINTAINERS: Add entry for Cavium MMC driver
Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jan Glauber [Thu, 30 Mar 2017 15:31:24 +0000 (17:31 +0200)]
mmc: cavium: Add core MMC driver for Cavium SOCs
This core driver will be used by a MIPS platform driver
or by an ARM64 PCI driver. The core driver implements the
mmc_host_ops and slot probe & remove functions.
Callbacks are provided to allow platform specific interrupt
enable and bus locking.
The host controller supports:
- up to 4 slots that can contain sd-cards or eMMC chips
- 1, 4 and 8 bit bus width
- SDR and DDR
- transfers up to 52 Mhz (might be less when multiple slots are used)
- DMA read/write
- multi-block read/write (but not stream mode)
Voltage is limited to 3.3v and shared for all slots (vmmc and vmmcq).
A global lock for all MMC devices is required because the host
controller is shared.
Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Jan Glauber [Thu, 30 Mar 2017 15:31:23 +0000 (17:31 +0200)]
dt-bindings: mmc: Add Cavium SOCs MMC bindings
Add description of Cavium Octeon and ThunderX SOC device tree bindings.
CC: Ulf Hansson <ulf.hansson@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Mark Rutland <mark.rutland@arm.com> CC: devicetree@vger.kernel.org Signed-off-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Acked-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_wait_for_data_req_done() is called in exactly one place,
and having it spread out is making things hard to oversee.
Factor this function into mmc_finalize_areq().
Linus Walleij [Tue, 28 Mar 2017 08:40:29 +0000 (10:40 +0200)]
mmc: core: move some code in mmc_start_areq()
"previous" is a better name for the variable storing the previous
asynchronous request, better than the opaque name "data" atleast.
We see that we assign the return status to the returned variable
on all code paths, so we might as well just do that immediately
after calling mmc_finalize_areq().
Adrian Hunter [Mon, 13 Mar 2017 12:36:40 +0000 (14:36 +0200)]
mmc: block: Change mmc_apply_rel_rw() to get block address from the request
mmc_apply_rel_rw() will be used by Software Command Queuing also. In that
case the command argument is not the block address so change
mmc_apply_rel_rw() to get block address from the request.
Adrian Hunter [Mon, 13 Mar 2017 12:36:38 +0000 (14:36 +0200)]
mmc: mmc_test: Disable Command Queue while mmc_test is used
Normal read and write commands may not be used while the command queue is
enabled. Disable the Command Queue when mmc_test is probed and re-enable it
when it is removed.
Adrian Hunter [Mon, 13 Mar 2017 12:36:36 +0000 (14:36 +0200)]
mmc: queue: Share mmc request array between partitions
eMMC can have multiple internal partitions that are represented as separate
disks / queues. However switching between partitions is only done when the
queue is empty. Consequently the array of mmc requests that are queued can
be shared between partitions saving memory.
Keep a pointer to the mmc request queue on the card, and use that instead
of allocating a new one for each partition.
Adrian Hunter [Mon, 13 Mar 2017 12:36:35 +0000 (14:36 +0200)]
mmc: block: Introduce queue semantics
Change from viewing the requests in progress as 'current' and 'previous',
to viewing them as a queue. The current request is allocated to the first
free slot. The presence of incomplete requests is determined from the
count (mq->qcnt) of entries in the queue. Non-read-write requests (i.e.
discards and flushes) are not added to the queue at all and require no
special handling. Also no special handling is needed for the
MMC_BLK_NEW_REQUEST case.
As well as allowing an arbitrarily sized queue, the queue thread function
is significantly simpler.
Sergio Prado [Fri, 31 Mar 2017 23:50:55 +0000 (20:50 -0300)]
dt-bindings: mmc: add DT binding for S3C24XX MMC/SD/SDIO controller
Adds the device tree bindings description for Samsung S3C24XX
MMC/SD/SDIO controller, used as a connectivity interface with external
MMC, SD and SDIO storage mediums.
Heiner Kallweit [Sat, 25 Mar 2017 10:28:13 +0000 (11:28 +0100)]
mmc: meson-gx: add CMD23 mode
CMD23 mode (use "set block count" command before transferring multiple
data blocks) typically is more performant as host / card know upfront
how many data blocks to expect. Therefore add support for this mode to
the driver.
Heiner Kallweit [Sat, 25 Mar 2017 10:24:41 +0000 (11:24 +0100)]
mmc: meson-gx: use per port interrupt names
So far the driver name is used as interrupt description, therefore in
/proc/interrupts it's not possible to tell which interrupt belongs to
which port. Change this by switching to NULL what causes the default
(device name) to be used. In our case that's the DT node name.
Heiner Kallweit [Sat, 25 Mar 2017 10:23:24 +0000 (11:23 +0100)]
mmc: meson-gx: use bitfield macros
Use GENMASK consistently for all bit masks and switch to using the
bitfield macros FIELD_GET and FIELD_PREP. This hides parts of the
complexity of dealing with bit fields.
Shawn Lin [Fri, 24 Mar 2017 07:50:12 +0000 (15:50 +0800)]
mmc: sdhci: clarify the get_timeout_clock callback
Currently the get_timeout_clock callback doesn't clearly
have a statement that it needs the variant drivers to return
the timeout clock rate in kHz if the SDHCI_TIMEOUT_CLK_UNIT
isn't present, otherwise the variant drivers should return it
in MHz. It's also very likely that further variant drivers which
are going to use this callback will be confused by this situation.
Given the fact that moderm sdhci variant hosts are very prone to get
the timeout clock from common clock framework (actually the only three
users did that), it's more natural to return the value in Hz and we
make an explicit comment there. Then we put the unit conversion inside
the sdhci core. Thus will improve the code and prevent further misuses.
Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Icenowy Zheng [Thu, 16 Mar 2017 13:29:03 +0000 (21:29 +0800)]
mmc: sunxi: change controller error info to debug level
The controller's errors are usually normal (for example, for MMC or SDIO
cards, some errors are expected to happen; and for boards without a
dedicated card detect pin the error info will even flood console and
hide other normal messages) and hard to understand.
Change their print level to debug, thus it won't be shown to generic
users.
Heiner Kallweit [Wed, 22 Mar 2017 21:33:53 +0000 (22:33 +0100)]
mmc: meson-gx: improve setting data->bytes_xfered
Centralize setting data->bytes_xfered in one place and make sure
that the number of transfererd bytes is set only if we receive
the end-of-chain interrupt and there was no error.
yong mao [Wed, 15 Mar 2017 07:26:40 +0000 (15:26 +0800)]
mmc: mediatek: Use data tune for CMD line tune
If we don't select a set of better parameters for our emmc host,
It may easily occur CMD response CRC error. And also it may cause
cannot boot up issue.
Fot getting a set of better parameters, our emmc host supports
data tune mechanism.Therefore, our emmc driver also should change
to use data tune for CMD line.
Because our emmc host use the different clock source to sample the
CMD signal between HS200 and HS400 mode, the parameters are also
different between these two modes.
Separate cmd internal delay for HS200/HS400 mode.
This change can fix "System can not boot up" issue.
yong mao [Wed, 15 Mar 2017 07:26:38 +0000 (15:26 +0800)]
mmc: dt-bindings: update Mediatek MMC bindings
Add description for mediatek,hs200-cmd-int-delay
Add description for mediatek,hs400-cmd-int-delay
Add description for mediatek,hs400-cmd-resp-sel-rising
Signed-off-by: Yong Mao <yong.mao@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Heiner Kallweit [Wed, 22 Mar 2017 20:59:29 +0000 (21:59 +0100)]
mmc: sdio: improve mmc_io_rw_extended
Improve mmc_io_rw_extended a little:
- using DIV_ROUND_UP achieves the same but is better readable
- simplify code by using sg_set_buf
- simplify one statement by using -= operator
Current code gets number of taps only once and keeps the value. This is
not correct, we need to obtain it every time before executing tuning,
so remove the outer if-block.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[wsa: extracted from a larger patch and reworded commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Thu, 16 Mar 2017 10:56:02 +0000 (11:56 +0100)]
mmc: tmio: always unmap DMA before waiting for interrupt
In the (maybe academical) case, we don't get a DATAEND interrupt after
DMA completed, we will wait endlessly for the completion to complete.
This is not bad per se, since we have a more generic completion tracking
a timeout. In that rare case, however, the DMA buffer will not get
unmapped and we have a leak. Reorder the code, so unmapping will always
take place.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter [Mon, 20 Mar 2017 17:50:51 +0000 (19:50 +0200)]
mmc: sdhci-pci: Let suspend/resume callbacks replace default callbacks
The suspend / resume callbacks lack the flexibility to allow a device to
specify a different function entirely. Change them around so that device
functions are called directly and they in turn can call the default
implementations if needed.
Adrian Hunter [Mon, 20 Mar 2017 17:50:48 +0000 (19:50 +0200)]
mmc: sdhci-pci: Let devices define how to add the host
SDHCI provides more flexibility than simply calling sdhci_add_host(). Make
that available by allowing devices to specify their own ->add_host()
function.
Adrian Hunter [Mon, 20 Mar 2017 17:50:38 +0000 (19:50 +0200)]
mmc: sdhci: Reduce spin lock usage in sdhci_execute_tuning
Tuning execution is already synchronized with respect to other host
operations by upper layers "claiming" the host, which also takes care of
runtime pm. There can be no requests in progress. Retain the spin lock
usage only for ensuring that sending tuning commands is synchronized with
respect to the interrupt handler.
Adrian Hunter [Mon, 20 Mar 2017 17:50:37 +0000 (19:50 +0200)]
mmc: sdhci: Do not use spin lock in set_ios paths
The spin lock is not necessary in set_ios. Anything that is racing with
changes to the I/O state is already broken. The mmc core already provides
synchronization via "claiming" the host. So remove spin_lock and friends
from sdhci_set_ios and related callbacks.
Adrian Hunter [Mon, 20 Mar 2017 17:50:33 +0000 (19:50 +0200)]
mmc: sdhci-pci: Let devices define their own private data
Let devices define their own private data to facilitate device-specific
operations. The size of the private structure is specified in the
sdhci_pci_fixes structure, then sdhci_pci_probe_slot() will allocate extra
space for it, and sdhci_pci_priv() can be used to get a reference to it.
Adrian Hunter [Mon, 20 Mar 2017 17:50:32 +0000 (19:50 +0200)]
mmc: sdhci: Let drivers decide whether to use mmc_retune_needed() with pm
Devices might save and restore tuning values so that re-tuning might not be
needed after a pm transition. Let drivers decide by pushing the
mmc_retune_needed() logic down to them.
Adrian Hunter [Mon, 20 Mar 2017 17:50:31 +0000 (19:50 +0200)]
mmc: sdhci: Optimize delay loops
The delay loops for reset and clock enable always take at least 1 ms
because they use mdelay(1). However they can take a lot less time e.g. less
than 50us. Use ktime and reduce the delay to 10 microseconds per loop.
Eric Anholt [Wed, 8 Mar 2017 09:19:03 +0000 (10:19 +0100)]
mmc: bcm2835: Add new driver for the sdhost controller.
The 2835 has two SD controllers: The Arasan sdhci controller (supported
by the iproc driver) and a custom sdhost controller. This patch adds a
driver for the latter.
The sdhci controller supports both sdcard and sdio. The sdhost
controller supports the sdcard only, but has better performance. Also
note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost
controller allows to use the sdhci controller for wifi support.
The configuration is done by devicetree via pin muxing. Both SD
controller are available on the same pins (2 pin groups = pin 22 to 27 +
pin 48 to 53). So it's possible to use both SD controllers at the same
time with different pin groups.
The code was originally written by Phil Elwell in the downstream
Rasbperry Pi tree. In preparation for the upstream merge it was
cleaned up and the code base was moderized by Eric Anholt, Stefan
Wahren and Gerd Hoffmann.
Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
tcharding [Wed, 15 Mar 2017 08:48:04 +0000 (19:48 +1100)]
mmc: core: simplify return code
File contains multiple functions doing variations on the same thing,
sdio_readb(), sdio_writeb()f, sdio_readw(), sdio_writew()
etc. Although the functions have very similar logic the code is laid
out in a variety of ways. This makes it overly complicated to
read. There is a already a nice clean chunk of code, if we use this
format for all instances then we will have cleaned up the code,
reduced the line count and lessened the cognitive load required while
reading. Less lines equals less bugs.
Pick the most simple and clear code flow and change all functions to
be the same.
Signed-off-by: Tobin C. Harding <me@tobin.cc> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Michał Zegan [Tue, 14 Mar 2017 20:05:20 +0000 (21:05 +0100)]
mmc: meson-gx: fix error path when driver initialization fails before enabling clocks
This patch fixes the case where meson_mmc_probe function fails before
core_clk is enabled.
Originally, that would result in a try to disable the core clock, and if
it was not already enabled, it would result in a kernel warning.
This issue is similar to the one with div_clk.
Fix it by introducing another error path used only between successfully
enabling the core clock, and successfully enabling the div clock.
That would ensure that core clock is disabled only if it was enabled before.
Signed-off-by: Michał Zegan <webczat@webczatnet.pl> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Thierry Reding [Wed, 8 Mar 2017 19:00:39 +0000 (20:00 +0100)]
mmc: tegra: Support module reset
The device tree binding for the SDHCI controller found on Tegra SoCs
specifies that a reset control can be provided by the device tree. No
code was ever added to support the module reset, which can cause the
driver to try and access registers from a module that's in reset. On
most Tegra SoC generations doing so would cause a hang.
Note that it's unlikely to see this happen because on most platforms
these resets will have been deasserted by the bootloader. However the
portability can be improved by making sure the driver deasserts the
reset before accessing any registers.
Since resets are synchronous on Tegra SoCs, the platform driver needs
to implement a custom ->remove() callback now to make sure the clock
is disabled after the reset is asserted.
Wolfram Sang [Tue, 14 Mar 2017 10:09:19 +0000 (11:09 +0100)]
mmc: host: tmio: fill in response from auto cmd12
After we received the dataend interrupt, R1 response register carries
the value from the automatically generated stop command. Report that
info back to the MMC block layer, so we will be notified in case of e.g.
ECC errors which happened during the last transfer.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Wolfram Sang [Fri, 17 Feb 2017 18:22:41 +0000 (19:22 +0100)]
mmc: tmio: ensure end of DMA and SD access are in sync
The current code assumes that DMA is finished before SD access end is
flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card
interrupt routine when DATAEND is set. The assumption is not safe,
though. Even by mounting an SD card, it can be seen that sometimes DMA
complete is first, sometimes DATAEND. It seems they are usually close
enough timewise to not cause problems. However, a customer reported that
with CMD53 sometimes things really break apart. As a result, the BSP has
a patch which introduces flags for both events and makes sure both flags
are set before scheduling the tasklet. The customer accepted the patch,
yet it doesn't seem a proper upstream solution to me.
This patch refactors the code to replace the tasklet with already
existing and more lightweight mechanisms. First of all, we set the
callback in a DMA descriptor to automatically get notified when DMA is
done. In the callback, we then use a completion to make sure the SD
access has already ended. Then, we proceed as before.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Heiner Kallweit [Sat, 4 Mar 2017 12:36:45 +0000 (13:36 +0100)]
mmc: meson-gx: remove member mrq from struct meson_host
Struct mmc_command includes a reference to the related mmc_request.
Therefore we don't have to store mrq separately in struct meson_host.
And we can remove some now unneeded WARN_ON's.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Heiner Kallweit [Sat, 4 Mar 2017 12:35:13 +0000 (13:35 +0100)]
mmc: meson-gx: improve initial configuration
Config values which are not changed during runtime we can set
in the probe function already.
The block size setting is overwritten later in
meson_mmc_start_cmd anyway if needed, so it doesn't harm if we
remove this setting in meson_mmc_set_ios.
In addition write config register only if configuration changed.
Don't change the location of clock initialization as in an
earlier version of the patch, this change causes a hang.
This issue was reported and fix suggested by:
Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Heiner Kallweit [Sat, 4 Mar 2017 12:25:14 +0000 (13:25 +0100)]
mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
The condition should be "if (ret)" as the disable/unprepare is
supposed to be executed if the previous command fails.
In addition adjust the error path in probe to properly deal
with the case that cfg_div_clk can be registered successfully
but enable/prepare fails.
In this case we shouldn't call clk_disable_unprepare.
Reported-by: Michał Zegan <webczat_200@poczta.onet.pl> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Heiner Kallweit [Sat, 4 Mar 2017 12:22:57 +0000 (13:22 +0100)]
mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init
Because the DT requires a fixed number of mux parent clocks,
variable mux_parent_count can be replaced with constant
MUX_CLK_NUM_PARENTS, so remove it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
projects / karo-tx-linux.git / log