arch/arm/boot/dts/imx28-evk.dts

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 /include/ "imx28.dtsi"
  14
  15 / {
  16         model = "Freescale i.MX28 Evaluation Kit";
  17         compatible = "fsl,imx28-evk", "fsl,imx28";
  18
  19         memory {
  20                 reg = <0x40000000 0x08000000>;
  21         };
  22
  23         apb@80000000 {
  24                 apbh@80000000 {
  25                         gpmi-nand@8000c000 {
  26                                 pinctrl-names = "default";
  27                                 pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
  28                                              &gpmi_pins_evk>;
  29                                 status = "okay";
  30                         };
  31
  32                         ssp0: ssp@80010000 {
  33                                 compatible = "fsl,imx28-mmc";
  34                                 pinctrl-names = "default";
  35                                 pinctrl-0 = <&mmc0_8bit_pins_a
  36                                         &mmc0_cd_cfg &mmc0_sck_cfg>;
  37                                 bus-width = <8>;
  38                                 wp-gpios = <&gpio2 12 0>;
  39                                 vmmc-supply = <&reg_vddio_sd0>;
  40                                 status = "okay";
  41                         };
  42
  43                         ssp1: ssp@80012000 {
  44                                 compatible = "fsl,imx28-mmc";
  45                                 bus-width = <8>;
  46                                 wp-gpios = <&gpio0 28 0>;
  47                         };
  48
  49                         ssp2: ssp@80014000 {
  50                                 #address-cells = <1>;
  51                                 #size-cells = <0>;
  52                                 compatible = "fsl,imx28-spi";
  53                                 pinctrl-names = "default";
  54                                 pinctrl-0 = <&spi2_pins_a>;
  55                                 status = "okay";
  56
  57                                 flash: m25p80@0 {
  58                                         #address-cells = <1>;
  59                                         #size-cells = <1>;
  60                                         compatible = "sst,sst25vf016b";
  61                                         spi-max-frequency = <40000000>;
  62                                         reg = <0>;
  63                                 };
  64                         };
  65
  66                         pinctrl@80018000 {
  67                                 pinctrl-names = "default";
  68                                 pinctrl-0 = <&hog_pins_a>;
  69
  70                                 hog_pins_a: hog@0 {
  71                                         reg = <0>;
  72                                         fsl,pinmux-ids = <
  73                                                 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */
  74                                                 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */
  75                                                 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */
  76                                                 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
  77                                                 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
  78                                                 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
  79                                                 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
  80                                                 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
  81                                         >;
  82                                         fsl,drive-strength = <0>;
  83                                         fsl,voltage = <1>;
  84                                         fsl,pull-up = <0>;
  85                                 };
  86
  87                                 led_pin_gpio3_5: led_gpio3_5@0 {
  88                                         reg = <0>;
  89                                         fsl,pinmux-ids = <
  90                                                 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
  91                                         >;
  92                                         fsl,drive-strength = <0>;
  93                                         fsl,voltage = <1>;
  94                                         fsl,pull-up = <0>;
  95                                 };
  96
  97                                 gpmi_pins_evk: gpmi-nand-evk@0 {
  98                                         reg = <0>;
  99                                         fsl,pinmux-ids = <
 100                                                 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
 101                                                 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
 102                                         >;
 103                                         fsl,drive-strength = <0>;
 104                                         fsl,voltage = <1>;
 105                                         fsl,pull-up = <0>;
 106                                 };
 107
 108                                 lcdif_pins_evk: lcdif-evk@0 {
 109                                         reg = <0>;
 110                                         fsl,pinmux-ids = <
 111                                                 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
 112                                                 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
 113                                                 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
 114                                                 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
 115                                         >;
 116                                         fsl,drive-strength = <0>;
 117                                         fsl,voltage = <1>;
 118                                         fsl,pull-up = <0>;
 119                                 };
 120                         };
 121
 122                         lcdif@80030000 {
 123                                 pinctrl-names = "default";
 124                                 pinctrl-0 = <&lcdif_24bit_pins_a
 125                                              &lcdif_pins_evk>;
 126                                 lcd-supply = <&reg_lcd_3v3>;
 127                                 display = <&display>;
 128                                 status = "okay";
 129
 130                                 display: display {
 131                                         bits-per-pixel = <32>;
 132                                         bus-width = <24>;
 133
 134                                         display-timings {
 135                                                 native-mode = <&timing0>;
 136                                                 timing0: timing0 {
 137                                                         clock-frequency = <33500000>;
 138                                                         hactive = <800>;
 139                                                         vactive = <480>;
 140                                                         hback-porch = <89>;
 141                                                         hfront-porch = <164>;
 142                                                         vback-porch = <23>;
 143                                                         vfront-porch = <10>;
 144                                                         hsync-len = <10>;
 145                                                         vsync-len = <10>;
 146                                                         hsync-active = <0>;
 147                                                         vsync-active = <0>;
 148                                                         de-active = <1>;
 149                                                         pixelclk-active = <0>;
 150                                                 };
 151                                         };
 152                                 };
 153                         };
 154
 155                         can0: can@80032000 {
 156                                 pinctrl-names = "default";
 157                                 pinctrl-0 = <&can0_pins_a>;
 158                                 xceiver-supply = <&reg_can_3v3>;
 159                                 status = "okay";
 160                         };
 161
 162                         can1: can@80034000 {
 163                                 pinctrl-names = "default";
 164                                 pinctrl-0 = <&can1_pins_a>;
 165                                 xceiver-supply = <&reg_can_3v3>;
 166                                 status = "okay";
 167                         };
 168                 };
 169
 170                 apbx@80040000 {
 171                         saif0: saif@80042000 {
 172                                 pinctrl-names = "default";
 173                                 pinctrl-0 = <&saif0_pins_a>;
 174                                 status = "okay";
 175                         };
 176
 177                         saif1: saif@80046000 {
 178                                 pinctrl-names = "default";
 179                                 pinctrl-0 = <&saif1_pins_a>;
 180                                 fsl,saif-master = <&saif0>;
 181                                 status = "okay";
 182                         };
 183
 184                         lradc@80050000 {
 185                                 status = "okay";
 186                         };
 187
 188                         i2c0: i2c@80058000 {
 189                                 pinctrl-names = "default";
 190                                 pinctrl-0 = <&i2c0_pins_a>;
 191                                 status = "okay";
 192
 193                                 sgtl5000: codec@0a {
 194                                         compatible = "fsl,sgtl5000";
 195                                         reg = <0x0a>;
 196                                         VDDA-supply = <&reg_3p3v>;
 197                                         VDDIO-supply = <&reg_3p3v>;
 198                                         clocks = <&saif0>;
 199                                 };
 200
 201                                 at24@51 {
 202                                         compatible = "at24,24c32";
 203                                         pagesize = <32>;
 204                                         reg = <0x51>;
 205                                 };
 206                         };
 207
 208                         pwm: pwm@80064000 {
 209                                 pinctrl-names = "default";
 210                                 pinctrl-0 = <&pwm2_pins_a>;
 211                                 status = "okay";
 212                         };
 213
 214                         duart: serial@80074000 {
 215                                 pinctrl-names = "default";
 216                                 pinctrl-0 = <&duart_pins_a>;
 217                                 status = "okay";
 218                         };
 219
 220                         auart0: serial@8006a000 {
 221                                 pinctrl-names = "default";
 222                                 pinctrl-0 = <&auart0_pins_a>;
 223                                 status = "okay";
 224                         };
 225
 226                         auart3: serial@80070000 {
 227                                 pinctrl-names = "default";
 228                                 pinctrl-0 = <&auart3_pins_a>;
 229                                 status = "okay";
 230                         };
 231
 232                         usbphy0: usbphy@8007c000 {
 233                                 status = "okay";
 234                         };
 235
 236                         usbphy1: usbphy@8007e000 {
 237                                 status = "okay";
 238                         };
 239                 };
 240         };
 241
 242         ahb@80080000 {
 243                 usb0: usb@80080000 {
 244                         vbus-supply = <&reg_usb0_vbus>;
 245                         status = "okay";
 246                 };
 247
 248                 usb1: usb@80090000 {
 249                         vbus-supply = <&reg_usb1_vbus>;
 250                         status = "okay";
 251                 };
 252
 253                 mac0: ethernet@800f0000 {
 254                         phy-mode = "rmii";
 255                         pinctrl-names = "default";
 256                         pinctrl-0 = <&mac0_pins_a>;
 257                         phy-supply = <&reg_fec_3v3>;
 258                         phy-reset-gpios = <&gpio4 13 0>;
 259                         phy-reset-duration = <100>;
 260                         status = "okay";
 261                 };
 262
 263                 mac1: ethernet@800f4000 {
 264                         phy-mode = "rmii";
 265                         pinctrl-names = "default";
 266                         pinctrl-0 = <&mac1_pins_a>;
 267                         status = "okay";
 268                 };
 269         };
 270
 271         regulators {
 272                 compatible = "simple-bus";
 273
 274                 reg_3p3v: 3p3v {
 275                         compatible = "regulator-fixed";
 276                         regulator-name = "3P3V";
 277                         regulator-min-microvolt = <3300000>;
 278                         regulator-max-microvolt = <3300000>;
 279                         regulator-always-on;
 280                 };
 281
 282                 reg_vddio_sd0: vddio-sd0 {
 283                         compatible = "regulator-fixed";
 284                         regulator-name = "vddio-sd0";
 285                         regulator-min-microvolt = <3300000>;
 286                         regulator-max-microvolt = <3300000>;
 287                         gpio = <&gpio3 28 0>;
 288                 };
 289
 290                 reg_fec_3v3: fec-3v3 {
 291                         compatible = "regulator-fixed";
 292                         regulator-name = "fec-3v3";
 293                         regulator-min-microvolt = <3300000>;
 294                         regulator-max-microvolt = <3300000>;
 295                         gpio = <&gpio2 15 0>;
 296                 };
 297
 298                 reg_usb0_vbus: usb0_vbus {
 299                         compatible = "regulator-fixed";
 300                         regulator-name = "usb0_vbus";
 301                         regulator-min-microvolt = <5000000>;
 302                         regulator-max-microvolt = <5000000>;
 303                         gpio = <&gpio3 9 0>;
 304                         enable-active-high;
 305                 };
 306
 307                 reg_usb1_vbus: usb1_vbus {
 308                         compatible = "regulator-fixed";
 309                         regulator-name = "usb1_vbus";
 310                         regulator-min-microvolt = <5000000>;
 311                         regulator-max-microvolt = <5000000>;
 312                         gpio = <&gpio3 8 0>;
 313                         enable-active-high;
 314                 };
 315
 316                 reg_lcd_3v3: lcd-3v3 {
 317                         compatible = "regulator-fixed";
 318                         regulator-name = "lcd-3v3";
 319                         regulator-min-microvolt = <3300000>;
 320                         regulator-max-microvolt = <3300000>;
 321                         gpio = <&gpio3 30 0>;
 322                         enable-active-high;
 323                 };
 324
 325                 reg_can_3v3: can-3v3 {
 326                         compatible = "regulator-fixed";
 327                         regulator-name = "can-3v3";
 328                         regulator-min-microvolt = <3300000>;
 329                         regulator-max-microvolt = <3300000>;
 330                         gpio = <&gpio2 13 0>;
 331                         enable-active-high;
 332                 };
 333
 334         };
 335
 336         sound {
 337                 compatible = "fsl,imx28-evk-sgtl5000",
 338                              "fsl,mxs-audio-sgtl5000";
 339                 model = "imx28-evk-sgtl5000";
 340                 saif-controllers = <&saif0 &saif1>;
 341                 audio-codec = <&sgtl5000>;
 342         };
 343
 344         leds {
 345                 compatible = "gpio-leds";
 346                 pinctrl-names = "default";
 347                 pinctrl-0 = <&led_pin_gpio3_5>;
 348
 349                 user {
 350                         label = "Heartbeat";
 351                         gpios = <&gpio3 5 0>;
 352                         linux,default-trigger = "heartbeat";
 353                 };
 354         };
 355
 356         backlight {
 357                 compatible = "pwm-backlight";
 358                 pwms = <&pwm 2 5000000>;
 359                 brightness-levels = <0 4 8 16 32 64 128 255>;
 360                 default-brightness-level = <6>;
 361         };
 362 };