arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         interrupt-parent = <&icoll>;
  16
  17         aliases {
  18                 ethernet0 = &mac0;
  19                 ethernet1 = &mac1;
  20                 gpio0 = &gpio0;
  21                 gpio1 = &gpio1;
  22                 gpio2 = &gpio2;
  23                 gpio3 = &gpio3;
  24                 gpio4 = &gpio4;
  25                 saif0 = &saif0;
  26                 saif1 = &saif1;
  27                 serial0 = &auart0;
  28                 serial1 = &auart1;
  29                 serial2 = &auart2;
  30                 serial3 = &auart3;
  31                 serial4 = &auart4;
  32                 spi0 = &ssp1;
  33                 spi1 = &ssp2;
  34         };
  35
  36         cpus {
  37                 #address-cells = <0>;
  38                 #size-cells = <0>;
  39
  40                 cpu {
  41                         compatible = "arm,arm926ej-s";
  42                         device_type = "cpu";
  43                 };
  44         };
  45
  46         apb@80000000 {
  47                 compatible = "simple-bus";
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 reg = <0x80000000 0x80000>;
  51                 ranges;
  52
  53                 apbh@80000000 {
  54                         compatible = "simple-bus";
  55                         #address-cells = <1>;
  56                         #size-cells = <1>;
  57                         reg = <0x80000000 0x3c900>;
  58                         ranges;
  59
  60                         icoll: interrupt-controller@80000000 {
  61                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  62                                 interrupt-controller;
  63                                 #interrupt-cells = <1>;
  64                                 reg = <0x80000000 0x2000>;
  65                         };
  66
  67                         hsadc: hsadc@80002000 {
  68                                 reg = <0x80002000 0x2000>;
  69                                 interrupts = <13>;
  70                                 dmas = <&dma_apbh 12>;
  71                                 dma-names = "rx";
  72                                 status = "disabled";
  73                         };
  74
  75                         dma_apbh: dma-apbh@80004000 {
  76                                 compatible = "fsl,imx28-dma-apbh";
  77                                 reg = <0x80004000 0x2000>;
  78                                 interrupts = <82 83 84 85
  79                                               88 88 88 88
  80                                               88 88 88 88
  81                                               87 86 0 0>;
  82                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  83                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  84                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  85                                                   "hsadc", "lcdif", "empty", "empty";
  86                                 #dma-cells = <1>;
  87                                 dma-channels = <16>;
  88                                 clocks = <&clks 25>;
  89                         };
  90
  91                         perfmon: perfmon@80006000 {
  92                                 reg = <0x80006000 0x800>;
  93                                 interrupts = <27>;
  94                                 status = "disabled";
  95                         };
  96
  97                         gpmi: gpmi-nand@8000c000 {
  98                                 compatible = "fsl,imx28-gpmi-nand";
  99                                 #address-cells = <1>;
 100                                 #size-cells = <1>;
 101                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 102                                 reg-names = "gpmi-nand", "bch";
 103                                 interrupts = <41>;
 104                                 interrupt-names = "bch";
 105                                 clocks = <&clks 50>;
 106                                 clock-names = "gpmi_io";
 107                                 dmas = <&dma_apbh 4>;
 108                                 dma-names = "rx-tx";
 109                                 status = "disabled";
 110                         };
 111
 112                         ssp0: ssp@80010000 {
 113                                 #address-cells = <1>;
 114                                 #size-cells = <0>;
 115                                 reg = <0x80010000 0x2000>;
 116                                 interrupts = <96>;
 117                                 clocks = <&clks 46>;
 118                                 dmas = <&dma_apbh 0>;
 119                                 dma-names = "rx-tx";
 120                                 status = "disabled";
 121                         };
 122
 123                         ssp1: ssp@80012000 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                                 reg = <0x80012000 0x2000>;
 127                                 interrupts = <97>;
 128                                 clocks = <&clks 47>;
 129                                 dmas = <&dma_apbh 1>;
 130                                 dma-names = "rx-tx";
 131                                 status = "disabled";
 132                         };
 133
 134                         ssp2: ssp@80014000 {
 135                                 #address-cells = <1>;
 136                                 #size-cells = <0>;
 137                                 reg = <0x80014000 0x2000>;
 138                                 interrupts = <98>;
 139                                 clocks = <&clks 48>;
 140                                 dmas = <&dma_apbh 2>;
 141                                 dma-names = "rx-tx";
 142                                 status = "disabled";
 143                         };
 144
 145                         ssp3: ssp@80016000 {
 146                                 #address-cells = <1>;
 147                                 #size-cells = <0>;
 148                                 reg = <0x80016000 0x2000>;
 149                                 interrupts = <99>;
 150                                 clocks = <&clks 49>;
 151                                 dmas = <&dma_apbh 3>;
 152                                 dma-names = "rx-tx";
 153                                 status = "disabled";
 154                         };
 155
 156                         pinctrl: pinctrl@80018000 {
 157                                 #address-cells = <1>;
 158                                 #size-cells = <0>;
 159                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 160                                 reg = <0x80018000 0x2000>;
 161
 162                                 gpio0: gpio@0 {
 163                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 164                                         interrupts = <127>;
 165                                         gpio-controller;
 166                                         #gpio-cells = <2>;
 167                                         interrupt-controller;
 168                                         #interrupt-cells = <2>;
 169                                 };
 170
 171                                 gpio1: gpio@1 {
 172                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 173                                         interrupts = <126>;
 174                                         gpio-controller;
 175                                         #gpio-cells = <2>;
 176                                         interrupt-controller;
 177                                         #interrupt-cells = <2>;
 178                                 };
 179
 180                                 gpio2: gpio@2 {
 181                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 182                                         interrupts = <125>;
 183                                         gpio-controller;
 184                                         #gpio-cells = <2>;
 185                                         interrupt-controller;
 186                                         #interrupt-cells = <2>;
 187                                 };
 188
 189                                 gpio3: gpio@3 {
 190                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 191                                         interrupts = <124>;
 192                                         gpio-controller;
 193                                         #gpio-cells = <2>;
 194                                         interrupt-controller;
 195                                         #interrupt-cells = <2>;
 196                                 };
 197
 198                                 gpio4: gpio@4 {
 199                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 200                                         interrupts = <123>;
 201                                         gpio-controller;
 202                                         #gpio-cells = <2>;
 203                                         interrupt-controller;
 204                                         #interrupt-cells = <2>;
 205                                 };
 206
 207                                 duart_pins_a: duart@0 {
 208                                         reg = <0>;
 209                                         fsl,pinmux-ids = <
 210                                                 0x3102 /* MX28_PAD_PWM0__DUART_RX */
 211                                                 0x3112 /* MX28_PAD_PWM1__DUART_TX */
 212                                         >;
 213                                         fsl,drive-strength = <0>;
 214                                         fsl,voltage = <1>;
 215                                         fsl,pull-up = <0>;
 216                                 };
 217
 218                                 duart_pins_b: duart@1 {
 219                                         reg = <1>;
 220                                         fsl,pinmux-ids = <
 221                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 222                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 223                                         >;
 224                                         fsl,drive-strength = <0>;
 225                                         fsl,voltage = <1>;
 226                                         fsl,pull-up = <0>;
 227                                 };
 228
 229                                 duart_4pins_a: duart-4pins@0 {
 230                                         reg = <0>;
 231                                         fsl,pinmux-ids = <
 232                                                 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
 233                                                 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
 234                                                 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
 235                                                 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
 236                                         >;
 237                                         fsl,drive-strength = <0>;
 238                                         fsl,voltage = <1>;
 239                                         fsl,pull-up = <0>;
 240                                 };
 241
 242                                 gpmi_pins_a: gpmi-nand@0 {
 243                                         reg = <0>;
 244                                         fsl,pinmux-ids = <
 245                                                 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */
 246                                                 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */
 247                                                 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */
 248                                                 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */
 249                                                 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */
 250                                                 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */
 251                                                 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 252                                                 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 253                                                 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
 254                                                 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
 255                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 256                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 257                                                 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
 258                                                 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */
 259                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 260                                         >;
 261                                         fsl,drive-strength = <0>;
 262                                         fsl,voltage = <1>;
 263                                         fsl,pull-up = <0>;
 264                                 };
 265
 266                                 gpmi_status_cfg: gpmi-status-cfg {
 267                                         fsl,pinmux-ids = <
 268                                                 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 269                                                 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 270                                                 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */
 271                                         >;
 272                                         fsl,drive-strength = <2>;
 273                                 };
 274
 275                                 auart0_pins_a: auart0@0 {
 276                                         reg = <0>;
 277                                         fsl,pinmux-ids = <
 278                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 279                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 280                                                 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */
 281                                                 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */
 282                                         >;
 283                                         fsl,drive-strength = <0>;
 284                                         fsl,voltage = <1>;
 285                                         fsl,pull-up = <0>;
 286                                 };
 287
 288                                 auart0_2pins_a: auart0-2pins@0 {
 289                                         reg = <0>;
 290                                         fsl,pinmux-ids = <
 291                                                 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
 292                                                 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
 293                                         >;
 294                                         fsl,drive-strength = <0>;
 295                                         fsl,voltage = <1>;
 296                                         fsl,pull-up = <0>;
 297                                 };
 298
 299                                 auart1_pins_a: auart1@0 {
 300                                         reg = <0>;
 301                                         fsl,pinmux-ids = <
 302                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 303                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 304                                                 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
 305                                                 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
 306                                         >;
 307                                         fsl,drive-strength = <0>;
 308                                         fsl,voltage = <1>;
 309                                         fsl,pull-up = <0>;
 310                                 };
 311
 312                                 auart1_2pins_a: auart1-2pins@0 {
 313                                         reg = <0>;
 314                                         fsl,pinmux-ids = <
 315                                                 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
 316                                                 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
 317                                         >;
 318                                         fsl,drive-strength = <0>;
 319                                         fsl,voltage = <1>;
 320                                         fsl,pull-up = <0>;
 321                                 };
 322
 323                                 auart2_2pins_a: auart2-2pins@0 {
 324                                         reg = <0>;
 325                                         fsl,pinmux-ids = <
 326                                                 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
 327                                                 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
 328                                         >;
 329                                         fsl,drive-strength = <0>;
 330                                         fsl,voltage = <1>;
 331                                         fsl,pull-up = <0>;
 332                                 };
 333
 334                                 auart2_2pins_b: auart2-2pins@1 {
 335                                         reg = <1>;
 336                                         fsl,pinmux-ids = <
 337                                                 0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
 338                                                 0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
 339                                         >;
 340                                         fsl,drive-strength = <0>;
 341                                         fsl,voltage = <1>;
 342                                         fsl,pull-up = <0>;
 343                                 };
 344
 345                                 auart3_pins_a: auart3@0 {
 346                                         reg = <0>;
 347                                         fsl,pinmux-ids = <
 348                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 349                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 350                                                 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */
 351                                                 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */
 352                                         >;
 353                                         fsl,drive-strength = <0>;
 354                                         fsl,voltage = <1>;
 355                                         fsl,pull-up = <0>;
 356                                 };
 357
 358                                 auart3_2pins_a: auart3-2pins@0 {
 359                                         reg = <0>;
 360                                         fsl,pinmux-ids = <
 361                                                 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
 362                                                 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
 363                                         >;
 364                                         fsl,drive-strength = <0>;
 365                                         fsl,voltage = <1>;
 366                                         fsl,pull-up = <0>;
 367                                 };
 368
 369                                 auart3_2pins_b: auart3-2pins@1 {
 370                                         reg = <1>;
 371                                         fsl,pinmux-ids = <
 372                                                 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
 373                                                 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
 374                                         >;
 375                                         fsl,drive-strength = <0>;
 376                                         fsl,voltage = <1>;
 377                                         fsl,pull-up = <0>;
 378                                 };
 379
 380                                 auart4_2pins_a: auart4@0 {
 381                                         reg = <0>;
 382                                         fsl,pinmux-ids = <
 383                                                 0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
 384                                                 0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
 385                                         >;
 386                                         fsl,drive-strength = <0>;
 387                                         fsl,voltage = <1>;
 388                                         fsl,pull-up = <0>;
 389                                 };
 390
 391                                 mac0_pins_a: mac0@0 {
 392                                         reg = <0>;
 393                                         fsl,pinmux-ids = <
 394                                                 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */
 395                                                 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */
 396                                                 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */
 397                                                 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */
 398                                                 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */
 399                                                 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */
 400                                                 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */
 401                                                 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */
 402                                                 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */
 403                                         >;
 404                                         fsl,drive-strength = <1>;
 405                                         fsl,voltage = <1>;
 406                                         fsl,pull-up = <1>;
 407                                 };
 408
 409                                 mac1_pins_a: mac1@0 {
 410                                         reg = <0>;
 411                                         fsl,pinmux-ids = <
 412                                                 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */
 413                                                 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */
 414                                                 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */
 415                                                 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */
 416                                                 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */
 417                                                 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */
 418                                         >;
 419                                         fsl,drive-strength = <1>;
 420                                         fsl,voltage = <1>;
 421                                         fsl,pull-up = <1>;
 422                                 };
 423
 424                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 425                                         reg = <0>;
 426                                         fsl,pinmux-ids = <
 427                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 428                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 429                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 430                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 431                                                 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */
 432                                                 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */
 433                                                 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */
 434                                                 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */
 435                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 436                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 437                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 438                                         >;
 439                                         fsl,drive-strength = <1>;
 440                                         fsl,voltage = <1>;
 441                                         fsl,pull-up = <1>;
 442                                 };
 443
 444                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 445                                         reg = <0>;
 446                                         fsl,pinmux-ids = <
 447                                                 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */
 448                                                 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */
 449                                                 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */
 450                                                 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */
 451                                                 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */
 452                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 453                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 454                                         >;
 455                                         fsl,drive-strength = <1>;
 456                                         fsl,voltage = <1>;
 457                                         fsl,pull-up = <1>;
 458                                 };
 459
 460                                 mmc0_cd_cfg: mmc0-cd-cfg {
 461                                         fsl,pinmux-ids = <
 462                                                 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */
 463                                         >;
 464                                         fsl,pull-up = <0>;
 465                                 };
 466
 467                                 mmc0_sck_cfg: mmc0-sck-cfg {
 468                                         fsl,pinmux-ids = <
 469                                                 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */
 470                                         >;
 471                                         fsl,drive-strength = <2>;
 472                                         fsl,pull-up = <0>;
 473                                 };
 474
 475                                 i2c0_pins_a: i2c0@0 {
 476                                         reg = <0>;
 477                                         fsl,pinmux-ids = <
 478                                                 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */
 479                                                 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */
 480                                         >;
 481                                         fsl,drive-strength = <1>;
 482                                         fsl,voltage = <1>;
 483                                         fsl,pull-up = <1>;
 484                                 };
 485
 486                                 i2c0_pins_b: i2c0@1 {
 487                                         reg = <1>;
 488                                         fsl,pinmux-ids = <
 489                                                 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */
 490                                                 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */
 491                                         >;
 492                                         fsl,drive-strength = <1>;
 493                                         fsl,voltage = <1>;
 494                                         fsl,pull-up = <1>;
 495                                 };
 496
 497                                 i2c1_pins_a: i2c1@0 {
 498                                         reg = <0>;
 499                                         fsl,pinmux-ids = <
 500                                                 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */
 501                                                 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */
 502                                         >;
 503                                         fsl,drive-strength = <1>;
 504                                         fsl,voltage = <1>;
 505                                         fsl,pull-up = <1>;
 506                                 };
 507
 508                                 saif0_pins_a: saif0@0 {
 509                                         reg = <0>;
 510                                         fsl,pinmux-ids = <
 511                                                 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */
 512                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 513                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 514                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 515                                         >;
 516                                         fsl,drive-strength = <2>;
 517                                         fsl,voltage = <1>;
 518                                         fsl,pull-up = <1>;
 519                                 };
 520
 521                                 saif0_pins_b: saif0@1 {
 522                                         reg = <1>;
 523                                         fsl,pinmux-ids = <
 524                                                 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
 525                                                 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
 526                                                 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
 527                                         >;
 528                                         fsl,drive-strength = <2>;
 529                                         fsl,voltage = <1>;
 530                                         fsl,pull-up = <1>;
 531                                 };
 532
 533                                 saif1_pins_a: saif1@0 {
 534                                         reg = <0>;
 535                                         fsl,pinmux-ids = <
 536                                                 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */
 537                                         >;
 538                                         fsl,drive-strength = <2>;
 539                                         fsl,voltage = <1>;
 540                                         fsl,pull-up = <1>;
 541                                 };
 542
 543                                 pwm0_pins_a: pwm0@0 {
 544                                         reg = <0>;
 545                                         fsl,pinmux-ids = <
 546                                                 0x3100 /* MX28_PAD_PWM0__PWM_0 */
 547                                         >;
 548                                         fsl,drive-strength = <0>;
 549                                         fsl,voltage = <1>;
 550                                         fsl,pull-up = <0>;
 551                                 };
 552
 553                                 pwm2_pins_a: pwm2@0 {
 554                                         reg = <0>;
 555                                         fsl,pinmux-ids = <
 556                                                 0x3120 /* MX28_PAD_PWM2__PWM_2 */
 557                                         >;
 558                                         fsl,drive-strength = <0>;
 559                                         fsl,voltage = <1>;
 560                                         fsl,pull-up = <0>;
 561                                 };
 562
 563                                 pwm3_pins_a: pwm3@0 {
 564                                         reg = <0>;
 565                                         fsl,pinmux-ids = <
 566                                                 0x31c0 /* MX28_PAD_PWM3__PWM_3 */
 567                                         >;
 568                                         fsl,drive-strength = <0>;
 569                                         fsl,voltage = <1>;
 570                                         fsl,pull-up = <0>;
 571                                 };
 572
 573                                 pwm3_pins_b: pwm3@1 {
 574                                         reg = <1>;
 575                                         fsl,pinmux-ids = <
 576                                                 0x3141 /* MX28_PAD_SAIF0_MCLK__PWM3 */
 577                                         >;
 578                                         fsl,drive-strength = <0>;
 579                                         fsl,voltage = <1>;
 580                                         fsl,pull-up = <0>;
 581                                 };
 582
 583                                 pwm4_pins_a: pwm4@0 {
 584                                         reg = <0>;
 585                                         fsl,pinmux-ids = <
 586                                                 0x31d0 /* MX28_PAD_PWM4__PWM_4 */
 587                                         >;
 588                                         fsl,drive-strength = <0>;
 589                                         fsl,voltage = <1>;
 590                                         fsl,pull-up = <0>;
 591                                 };
 592
 593                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 594                                         reg = <0>;
 595                                         fsl,pinmux-ids = <
 596                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 597                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 598                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 599                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 600                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 601                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 602                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 603                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 604                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 605                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 606                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 607                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 608                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 609                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 610                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 611                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 612                                                 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
 613                                                 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
 614                                                 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */
 615                                                 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */
 616                                                 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */
 617                                                 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 618                                                 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 619                                                 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
 620                                         >;
 621                                         fsl,drive-strength = <0>;
 622                                         fsl,voltage = <1>;
 623                                         fsl,pull-up = <0>;
 624                                 };
 625
 626                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 627                                         reg = <0>;
 628                                         fsl,pinmux-ids = <
 629                                                 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
 630                                                 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
 631                                                 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
 632                                                 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
 633                                                 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
 634                                                 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
 635                                                 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
 636                                                 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
 637                                                 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
 638                                                 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
 639                                                 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
 640                                                 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
 641                                                 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
 642                                                 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
 643                                                 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
 644                                                 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
 645                                         >;
 646                                         fsl,drive-strength = <0>;
 647                                         fsl,voltage = <1>;
 648                                         fsl,pull-up = <0>;
 649                                 };
 650
 651                                 lcdif_sync_pins_a: lcdif-sync@0 {
 652                                         reg = <0>;
 653                                         fsl,pinmux-ids = <
 654                                                 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
 655                                                 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
 656                                                 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
 657                                                 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
 658                                         >;
 659                                         fsl,drive-strength = <0>;
 660                                         fsl,voltage = <1>;
 661                                         fsl,pull-up = <0>;
 662                                 };
 663
 664                                 can0_pins_a: can0@0 {
 665                                         reg = <0>;
 666                                         fsl,pinmux-ids = <
 667                                                 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */
 668                                                 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */
 669                                         >;
 670                                         fsl,drive-strength = <0>;
 671                                         fsl,voltage = <1>;
 672                                         fsl,pull-up = <0>;
 673                                 };
 674
 675                                 can1_pins_a: can1@0 {
 676                                         reg = <0>;
 677                                         fsl,pinmux-ids = <
 678                                                 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */
 679                                                 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */
 680                                         >;
 681                                         fsl,drive-strength = <0>;
 682                                         fsl,voltage = <1>;
 683                                         fsl,pull-up = <0>;
 684                                 };
 685
 686                                 spi2_pins_a: spi2@0 {
 687                                         reg = <0>;
 688                                         fsl,pinmux-ids = <
 689                                                 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */
 690                                                 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */
 691                                                 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */
 692                                                 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */
 693                                         >;
 694                                         fsl,drive-strength = <1>;
 695                                         fsl,voltage = <1>;
 696                                         fsl,pull-up = <1>;
 697                                 };
 698
 699                                 spi3_pins_a: spi3@0 {
 700                                         reg = <0>;
 701                                         fsl,pinmux-ids = <
 702                                                 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
 703                                                 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
 704                                                 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
 705                                                 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
 706                                                 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
 707                                                 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
 708                                         >;
 709                                         fsl,drive-strength = <1>;
 710                                         fsl,voltage = <1>;
 711                                         fsl,pull-up = <0>;
 712                                 };
 713
 714                                 usbphy0_pins_a: usbphy0@0 {
 715                                         reg = <0>;
 716                                         fsl,pinmux-ids = <
 717                                                 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
 718                                         >;
 719                                         fsl,drive-strength = <2>;
 720                                         fsl,voltage = <1>;
 721                                         fsl,pull-up = <0>;
 722                                 };
 723
 724                                 usbphy0_pins_b: usbphy0@1 {
 725                                         reg = <1>;
 726                                         fsl,pinmux-ids = <
 727                                                 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
 728                                         >;
 729                                         fsl,drive-strength = <2>;
 730                                         fsl,voltage = <1>;
 731                                         fsl,pull-up = <0>;
 732                                 };
 733
 734                                 usbphy1_pins_a: usbphy1@0 {
 735                                         reg = <0>;
 736                                         fsl,pinmux-ids = <
 737                                                 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
 738                                         >;
 739                                         fsl,drive-strength = <2>;
 740                                         fsl,voltage = <1>;
 741                                         fsl,pull-up = <0>;
 742                                 };
 743                         };
 744
 745                         digctl: digctl@8001c000 {
 746                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 747                                 reg = <0x8001c000 0x2000>;
 748                                 interrupts = <89>;
 749                                 status = "disabled";
 750                         };
 751
 752                         etm: etm@80022000 {
 753                                 reg = <0x80022000 0x2000>;
 754                                 status = "disabled";
 755                         };
 756
 757                         dma_apbx: dma-apbx@80024000 {
 758                                 compatible = "fsl,imx28-dma-apbx";
 759                                 reg = <0x80024000 0x2000>;
 760                                 interrupts = <78 79 66 0
 761                                               80 81 68 69
 762                                               70 71 72 73
 763                                               74 75 76 77>;
 764                                 interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
 765                                                   "saif0", "saif1", "i2c0", "i2c1",
 766                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 767                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 768                                 #dma-cells = <1>;
 769                                 dma-channels = <16>;
 770                                 clocks = <&clks 26>;
 771                         };
 772
 773                         dcp: dcp@80028000 {
 774                                 reg = <0x80028000 0x2000>;
 775                                 interrupts = <52 53 54>;
 776                                 compatible = "fsl-dcp";
 777                         };
 778
 779                         pxp: pxp@8002a000 {
 780                                 reg = <0x8002a000 0x2000>;
 781                                 interrupts = <39>;
 782                                 status = "disabled";
 783                         };
 784
 785                         ocotp: ocotp@8002c000 {
 786                                 compatible = "fsl,ocotp";
 787                                 reg = <0x8002c000 0x2000>;
 788                                 status = "disabled";
 789                         };
 790
 791                         axi-ahb@8002e000 {
 792                                 reg = <0x8002e000 0x2000>;
 793                                 status = "disabled";
 794                         };
 795
 796                         lcdif: lcdif@80030000 {
 797                                 compatible = "fsl,imx28-lcdif";
 798                                 reg = <0x80030000 0x2000>;
 799                                 interrupts = <38>;
 800                                 clocks = <&clks 55>;
 801                                 dmas = <&dma_apbh 13>;
 802                                 dma-names = "rx";
 803                                 status = "disabled";
 804                         };
 805
 806                         can0: can@80032000 {
 807                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 808                                 reg = <0x80032000 0x2000>;
 809                                 interrupts = <8>;
 810                                 clocks = <&clks 58>, <&clks 58>;
 811                                 clock-names = "ipg", "per";
 812                                 status = "disabled";
 813                         };
 814
 815                         can1: can@80034000 {
 816                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 817                                 reg = <0x80034000 0x2000>;
 818                                 interrupts = <9>;
 819                                 clocks = <&clks 59>, <&clks 59>;
 820                                 clock-names = "ipg", "per";
 821                                 status = "disabled";
 822                         };
 823
 824                         simdbg: simdbg@8003c000 {
 825                                 reg = <0x8003c000 0x200>;
 826                                 status = "disabled";
 827                         };
 828
 829                         simgpmisel: simgpmisel@8003c200 {
 830                                 reg = <0x8003c200 0x100>;
 831                                 status = "disabled";
 832                         };
 833
 834                         simsspsel: simsspsel@8003c300 {
 835                                 reg = <0x8003c300 0x100>;
 836                                 status = "disabled";
 837                         };
 838
 839                         simmemsel: simmemsel@8003c400 {
 840                                 reg = <0x8003c400 0x100>;
 841                                 status = "disabled";
 842                         };
 843
 844                         gpiomon: gpiomon@8003c500 {
 845                                 reg = <0x8003c500 0x100>;
 846                                 status = "disabled";
 847                         };
 848
 849                         simenet: simenet@8003c700 {
 850                                 reg = <0x8003c700 0x100>;
 851                                 status = "disabled";
 852                         };
 853
 854                         armjtag: armjtag@8003c800 {
 855                                 reg = <0x8003c800 0x100>;
 856                                 status = "disabled";
 857                         };
 858                 };
 859
 860                 apbx@80040000 {
 861                         compatible = "simple-bus";
 862                         #address-cells = <1>;
 863                         #size-cells = <1>;
 864                         reg = <0x80040000 0x40000>;
 865                         ranges;
 866
 867                         clks: clkctrl@80040000 {
 868                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
 869                                 reg = <0x80040000 0x2000>;
 870                                 #clock-cells = <1>;
 871                         };
 872
 873                         saif0: saif@80042000 {
 874                                 compatible = "fsl,imx28-saif";
 875                                 reg = <0x80042000 0x2000>;
 876                                 interrupts = <59>;
 877                                 #clock-cells = <0>;
 878                                 clocks = <&clks 53>;
 879                                 dmas = <&dma_apbx 4>;
 880                                 dma-names = "rx-tx";
 881                                 status = "disabled";
 882                         };
 883
 884                         power: power@80044000 {
 885                                 reg = <0x80044000 0x2000>;
 886                                 status = "disabled";
 887                         };
 888
 889                         saif1: saif@80046000 {
 890                                 compatible = "fsl,imx28-saif";
 891                                 reg = <0x80046000 0x2000>;
 892                                 interrupts = <58>;
 893                                 clocks = <&clks 54>;
 894                                 dmas = <&dma_apbx 5>;
 895                                 dma-names = "rx-tx";
 896                                 status = "disabled";
 897                         };
 898
 899                         lradc: lradc@80050000 {
 900                                 compatible = "fsl,imx28-lradc";
 901                                 reg = <0x80050000 0x2000>;
 902                                 interrupts = <10 14 15 16 17 18 19
 903                                                 20 21 22 23 24 25>;
 904                                 status = "disabled";
 905                                 clocks = <&clks 41>;
 906                         };
 907
 908                         spdif: spdif@80054000 {
 909                                 reg = <0x80054000 0x2000>;
 910                                 interrupts = <45>;
 911                                 dmas = <&dma_apbx 2>;
 912                                 dma-names = "tx";
 913                                 status = "disabled";
 914                         };
 915
 916                         mxs_rtc: rtc@80056000 {
 917                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
 918                                 reg = <0x80056000 0x2000>;
 919                                 interrupts = <29>;
 920                         };
 921
 922                         i2c0: i2c@80058000 {
 923                                 #address-cells = <1>;
 924                                 #size-cells = <0>;
 925                                 compatible = "fsl,imx28-i2c";
 926                                 reg = <0x80058000 0x2000>;
 927                                 interrupts = <111>;
 928                                 clock-frequency = <100000>;
 929                                 dmas = <&dma_apbx 6>;
 930                                 dma-names = "rx-tx";
 931                                 status = "disabled";
 932                         };
 933
 934                         i2c1: i2c@8005a000 {
 935                                 #address-cells = <1>;
 936                                 #size-cells = <0>;
 937                                 compatible = "fsl,imx28-i2c";
 938                                 reg = <0x8005a000 0x2000>;
 939                                 interrupts = <110>;
 940                                 clock-frequency = <100000>;
 941                                 dmas = <&dma_apbx 7>;
 942                                 dma-names = "rx-tx";
 943                                 status = "disabled";
 944                         };
 945
 946                         pwm: pwm@80064000 {
 947                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
 948                                 reg = <0x80064000 0x2000>;
 949                                 clocks = <&clks 44>;
 950                                 #pwm-cells = <2>;
 951                                 fsl,pwm-number = <8>;
 952                                 status = "disabled";
 953                         };
 954
 955                         timer: timrot@80068000 {
 956                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
 957                                 reg = <0x80068000 0x2000>;
 958                                 interrupts = <48 49 50 51>;
 959                                 clocks = <&clks 26>;
 960                         };
 961
 962                         auart0: serial@8006a000 {
 963                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 964                                 reg = <0x8006a000 0x2000>;
 965                                 interrupts = <112>;
 966                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 967                                 dma-names = "rx", "tx";
 968                                 clocks = <&clks 45>;
 969                                 status = "disabled";
 970                         };
 971
 972                         auart1: serial@8006c000 {
 973                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 974                                 reg = <0x8006c000 0x2000>;
 975                                 interrupts = <113>;
 976                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
 977                                 dma-names = "rx", "tx";
 978                                 clocks = <&clks 45>;
 979                                 status = "disabled";
 980                         };
 981
 982                         auart2: serial@8006e000 {
 983                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 984                                 reg = <0x8006e000 0x2000>;
 985                                 interrupts = <114>;
 986                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
 987                                 dma-names = "rx", "tx";
 988                                 clocks = <&clks 45>;
 989                                 status = "disabled";
 990                         };
 991
 992                         auart3: serial@80070000 {
 993                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
 994                                 reg = <0x80070000 0x2000>;
 995                                 interrupts = <115>;
 996                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
 997                                 dma-names = "rx", "tx";
 998                                 clocks = <&clks 45>;
 999                                 status = "disabled";
1000                         };
1001
1002                         auart4: serial@80072000 {
1003                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1004                                 reg = <0x80072000 0x2000>;
1005                                 interrupts = <116>;
1006                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1007                                 dma-names = "rx", "tx";
1008                                 clocks = <&clks 45>;
1009                                 status = "disabled";
1010                         };
1011
1012                         duart: serial@80074000 {
1013                                 compatible = "arm,pl011", "arm,primecell";
1014                                 reg = <0x80074000 0x1000>;
1015                                 interrupts = <47>;
1016                                 clocks = <&clks 45>, <&clks 26>;
1017                                 clock-names = "uart", "apb_pclk";
1018                                 status = "disabled";
1019                         };
1020
1021                         usbphy0: usbphy@8007c000 {
1022                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1023                                 reg = <0x8007c000 0x2000>;
1024                                 clocks = <&clks 62>;
1025                                 status = "disabled";
1026                         };
1027
1028                         usbphy1: usbphy@8007e000 {
1029                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1030                                 reg = <0x8007e000 0x2000>;
1031                                 clocks = <&clks 63>;
1032                                 status = "disabled";
1033                         };
1034                 };
1035         };
1036
1037         ahb@80080000 {
1038                 compatible = "simple-bus";
1039                 #address-cells = <1>;
1040                 #size-cells = <1>;
1041                 reg = <0x80080000 0x80000>;
1042                 ranges;
1043
1044                 usb0: usb@80080000 {
1045                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1046                         reg = <0x80080000 0x10000>;
1047                         interrupts = <93>;
1048                         clocks = <&clks 60>;
1049                         fsl,usbphy = <&usbphy0>;
1050                         status = "disabled";
1051                 };
1052
1053                 usb1: usb@80090000 {
1054                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1055                         reg = <0x80090000 0x10000>;
1056                         interrupts = <92>;
1057                         clocks = <&clks 61>;
1058                         fsl,usbphy = <&usbphy1>;
1059                         status = "disabled";
1060                 };
1061
1062                 dflpt: dflpt@800c0000 {
1063                         reg = <0x800c0000 0x10000>;
1064                         status = "disabled";
1065                 };
1066
1067                 mac0: ethernet@800f0000 {
1068                         compatible = "fsl,imx28-fec";
1069                         reg = <0x800f0000 0x4000>;
1070                         interrupts = <101>;
1071                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1072                         clock-names = "ipg", "ahb", "enet_out";
1073                         status = "disabled";
1074                 };
1075
1076                 mac1: ethernet@800f4000 {
1077                         compatible = "fsl,imx28-fec";
1078                         reg = <0x800f4000 0x4000>;
1079                         interrupts = <102>;
1080                         clocks = <&clks 57>, <&clks 57>;
1081                         clock-names = "ipg", "ahb";
1082                         status = "disabled";
1083                 };
1084
1085                 etn_switch: switch@800f8000 {
1086                         reg = <0x800f8000 0x8000>;
1087                         status = "disabled";
1088                 };
1089         };
1090 };