1 /* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
5 * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
8 * Permission is hereby granted, free of charge, to any person obtaining a
9 * copy of this software and associated documentation files (the
10 * "Software"), to deal in the Software without restriction, including
11 * without limitation the rights to use, copy, modify, merge, publish,
12 * distribute, sub license, and/or sell copies of the Software, and to
13 * permit persons to whom the Software is furnished to do so, subject to
14 * the following conditions:
16 * The above copyright notice and this permission notice (including the
17 * next paragraph) shall be included in all copies or substantial portions
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
21 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
22 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
23 * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
24 * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
25 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
26 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
30 #include <linux/device.h>
32 #include <drm/i915_drm.h>
34 #include "i915_trace.h"
35 #include "intel_drv.h"
37 #include <linux/console.h>
38 #include <linux/module.h>
39 #include <drm/drm_crtc_helper.h>
41 static int i915_modeset __read_mostly = -1;
42 module_param_named(modeset, i915_modeset, int, 0400);
43 MODULE_PARM_DESC(modeset,
44 "Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
45 "1=on, -1=force vga console preference [default])");
47 unsigned int i915_fbpercrtc __always_unused = 0;
48 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
50 int i915_panel_ignore_lid __read_mostly = 1;
51 module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
52 MODULE_PARM_DESC(panel_ignore_lid,
53 "Override lid status (0=autodetect, 1=autodetect disabled [default], "
54 "-1=force lid closed, -2=force lid open)");
56 unsigned int i915_powersave __read_mostly = 1;
57 module_param_named(powersave, i915_powersave, int, 0600);
58 MODULE_PARM_DESC(powersave,
59 "Enable powersavings, fbc, downclocking, etc. (default: true)");
61 int i915_semaphores __read_mostly = -1;
62 module_param_named(semaphores, i915_semaphores, int, 0600);
63 MODULE_PARM_DESC(semaphores,
64 "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
66 int i915_enable_rc6 __read_mostly = -1;
67 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
68 MODULE_PARM_DESC(i915_enable_rc6,
69 "Enable power-saving render C-state 6. "
70 "Different stages can be selected via bitmask values "
71 "(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
72 "For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
73 "default: -1 (use per-chip default)");
75 int i915_enable_fbc __read_mostly = -1;
76 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
77 MODULE_PARM_DESC(i915_enable_fbc,
78 "Enable frame buffer compression for power savings "
79 "(default: -1 (use per-chip default))");
81 unsigned int i915_lvds_downclock __read_mostly = 0;
82 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
83 MODULE_PARM_DESC(lvds_downclock,
84 "Use panel (LVDS/eDP) downclocking for power savings "
87 int i915_lvds_channel_mode __read_mostly;
88 module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
89 MODULE_PARM_DESC(lvds_channel_mode,
90 "Specify LVDS channel mode "
91 "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
93 int i915_panel_use_ssc __read_mostly = -1;
94 module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
95 MODULE_PARM_DESC(lvds_use_ssc,
96 "Use Spread Spectrum Clock with panels [LVDS/eDP] "
97 "(default: auto from VBT)");
99 int i915_vbt_sdvo_panel_type __read_mostly = -1;
100 module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
101 MODULE_PARM_DESC(vbt_sdvo_panel_type,
102 "Override/Ignore selection of SDVO panel mode in the VBT "
103 "(-2=ignore, -1=auto [default], index in VBT BIOS table)");
105 static bool i915_try_reset __read_mostly = true;
106 module_param_named(reset, i915_try_reset, bool, 0600);
107 MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
109 bool i915_enable_hangcheck __read_mostly = true;
110 module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
111 MODULE_PARM_DESC(enable_hangcheck,
112 "Periodically check GPU activity for detecting hangs. "
113 "WARNING: Disabling this can cause system wide hangs. "
116 int i915_enable_ppgtt __read_mostly = -1;
117 module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
118 MODULE_PARM_DESC(i915_enable_ppgtt,
119 "Enable PPGTT (default: true)");
121 int i915_enable_psr __read_mostly = 0;
122 module_param_named(enable_psr, i915_enable_psr, int, 0600);
123 MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
125 unsigned int i915_preliminary_hw_support __read_mostly = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT);
126 module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 0600);
127 MODULE_PARM_DESC(preliminary_hw_support,
128 "Enable preliminary hardware support.");
130 int i915_disable_power_well __read_mostly = 1;
131 module_param_named(disable_power_well, i915_disable_power_well, int, 0600);
132 MODULE_PARM_DESC(disable_power_well,
133 "Disable the power well when possible (default: true)");
135 int i915_enable_ips __read_mostly = 1;
136 module_param_named(enable_ips, i915_enable_ips, int, 0600);
137 MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
139 bool i915_fastboot __read_mostly = 0;
140 module_param_named(fastboot, i915_fastboot, bool, 0600);
141 MODULE_PARM_DESC(fastboot, "Try to skip unnecessary mode sets at boot time "
144 int i915_enable_pc8 __read_mostly = 1;
145 module_param_named(enable_pc8, i915_enable_pc8, int, 0600);
146 MODULE_PARM_DESC(enable_pc8, "Enable support for low power package C states (PC8+) (default: true)");
148 int i915_pc8_timeout __read_mostly = 5000;
149 module_param_named(pc8_timeout, i915_pc8_timeout, int, 0600);
150 MODULE_PARM_DESC(pc8_timeout, "Number of msecs of idleness required to enter PC8+ (default: 5000)");
152 bool i915_prefault_disable __read_mostly;
153 module_param_named(prefault_disable, i915_prefault_disable, bool, 0600);
154 MODULE_PARM_DESC(prefault_disable,
155 "Disable page prefaulting for pread/pwrite/reloc (default:false). For developers only.");
157 static struct drm_driver driver;
158 extern int intel_agp_enabled;
160 static const struct intel_device_info intel_i830_info = {
161 .gen = 2, .is_mobile = 1, .cursor_needs_physical = 1, .num_pipes = 2,
162 .has_overlay = 1, .overlay_needs_physical = 1,
165 static const struct intel_device_info intel_845g_info = {
166 .gen = 2, .num_pipes = 1,
167 .has_overlay = 1, .overlay_needs_physical = 1,
170 static const struct intel_device_info intel_i85x_info = {
171 .gen = 2, .is_i85x = 1, .is_mobile = 1, .num_pipes = 2,
172 .cursor_needs_physical = 1,
173 .has_overlay = 1, .overlay_needs_physical = 1,
176 static const struct intel_device_info intel_i865g_info = {
177 .gen = 2, .num_pipes = 1,
178 .has_overlay = 1, .overlay_needs_physical = 1,
181 static const struct intel_device_info intel_i915g_info = {
182 .gen = 3, .is_i915g = 1, .cursor_needs_physical = 1, .num_pipes = 2,
183 .has_overlay = 1, .overlay_needs_physical = 1,
185 static const struct intel_device_info intel_i915gm_info = {
186 .gen = 3, .is_mobile = 1, .num_pipes = 2,
187 .cursor_needs_physical = 1,
188 .has_overlay = 1, .overlay_needs_physical = 1,
191 static const struct intel_device_info intel_i945g_info = {
192 .gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1, .num_pipes = 2,
193 .has_overlay = 1, .overlay_needs_physical = 1,
195 static const struct intel_device_info intel_i945gm_info = {
196 .gen = 3, .is_i945gm = 1, .is_mobile = 1, .num_pipes = 2,
197 .has_hotplug = 1, .cursor_needs_physical = 1,
198 .has_overlay = 1, .overlay_needs_physical = 1,
202 static const struct intel_device_info intel_i965g_info = {
203 .gen = 4, .is_broadwater = 1, .num_pipes = 2,
208 static const struct intel_device_info intel_i965gm_info = {
209 .gen = 4, .is_crestline = 1, .num_pipes = 2,
210 .is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
215 static const struct intel_device_info intel_g33_info = {
216 .gen = 3, .is_g33 = 1, .num_pipes = 2,
217 .need_gfx_hws = 1, .has_hotplug = 1,
221 static const struct intel_device_info intel_g45_info = {
222 .gen = 4, .is_g4x = 1, .need_gfx_hws = 1, .num_pipes = 2,
223 .has_pipe_cxsr = 1, .has_hotplug = 1,
227 static const struct intel_device_info intel_gm45_info = {
228 .gen = 4, .is_g4x = 1, .num_pipes = 2,
229 .is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
230 .has_pipe_cxsr = 1, .has_hotplug = 1,
235 static const struct intel_device_info intel_pineview_info = {
236 .gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1, .num_pipes = 2,
237 .need_gfx_hws = 1, .has_hotplug = 1,
241 static const struct intel_device_info intel_ironlake_d_info = {
242 .gen = 5, .num_pipes = 2,
243 .need_gfx_hws = 1, .has_hotplug = 1,
247 static const struct intel_device_info intel_ironlake_m_info = {
248 .gen = 5, .is_mobile = 1, .num_pipes = 2,
249 .need_gfx_hws = 1, .has_hotplug = 1,
254 static const struct intel_device_info intel_sandybridge_d_info = {
255 .gen = 6, .num_pipes = 2,
256 .need_gfx_hws = 1, .has_hotplug = 1,
263 static const struct intel_device_info intel_sandybridge_m_info = {
264 .gen = 6, .is_mobile = 1, .num_pipes = 2,
265 .need_gfx_hws = 1, .has_hotplug = 1,
273 #define GEN7_FEATURES \
274 .gen = 7, .num_pipes = 3, \
275 .need_gfx_hws = 1, .has_hotplug = 1, \
281 static const struct intel_device_info intel_ivybridge_d_info = {
286 static const struct intel_device_info intel_ivybridge_m_info = {
293 static const struct intel_device_info intel_ivybridge_q_info = {
296 .num_pipes = 0, /* legal, last one wins */
299 static const struct intel_device_info intel_valleyview_m_info = {
304 .display_mmio_offset = VLV_DISPLAY_BASE,
305 .has_llc = 0, /* legal, last one wins */
308 static const struct intel_device_info intel_valleyview_d_info = {
312 .display_mmio_offset = VLV_DISPLAY_BASE,
313 .has_llc = 0, /* legal, last one wins */
316 static const struct intel_device_info intel_haswell_d_info = {
324 static const struct intel_device_info intel_haswell_m_info = {
335 * Make sure any device matches here are from most specific to most
336 * general. For example, since the Quanta match is based on the subsystem
337 * and subvendor IDs, we need it to come before the more general IVB
338 * PCI ID matches, otherwise we'll use the wrong info struct above.
340 #define INTEL_PCI_IDS \
341 INTEL_I830_IDS(&intel_i830_info), \
342 INTEL_I845G_IDS(&intel_845g_info), \
343 INTEL_I85X_IDS(&intel_i85x_info), \
344 INTEL_I865G_IDS(&intel_i865g_info), \
345 INTEL_I915G_IDS(&intel_i915g_info), \
346 INTEL_I915GM_IDS(&intel_i915gm_info), \
347 INTEL_I945G_IDS(&intel_i945g_info), \
348 INTEL_I945GM_IDS(&intel_i945gm_info), \
349 INTEL_I965G_IDS(&intel_i965g_info), \
350 INTEL_G33_IDS(&intel_g33_info), \
351 INTEL_I965GM_IDS(&intel_i965gm_info), \
352 INTEL_GM45_IDS(&intel_gm45_info), \
353 INTEL_G45_IDS(&intel_g45_info), \
354 INTEL_PINEVIEW_IDS(&intel_pineview_info), \
355 INTEL_IRONLAKE_D_IDS(&intel_ironlake_d_info), \
356 INTEL_IRONLAKE_M_IDS(&intel_ironlake_m_info), \
357 INTEL_SNB_D_IDS(&intel_sandybridge_d_info), \
358 INTEL_SNB_M_IDS(&intel_sandybridge_m_info), \
359 INTEL_IVB_Q_IDS(&intel_ivybridge_q_info), /* must be first IVB */ \
360 INTEL_IVB_M_IDS(&intel_ivybridge_m_info), \
361 INTEL_IVB_D_IDS(&intel_ivybridge_d_info), \
362 INTEL_HSW_D_IDS(&intel_haswell_d_info), \
363 INTEL_HSW_M_IDS(&intel_haswell_m_info), \
364 INTEL_VLV_M_IDS(&intel_valleyview_m_info), \
365 INTEL_VLV_D_IDS(&intel_valleyview_d_info)
367 static const struct pci_device_id pciidlist[] = { /* aka */
372 #if defined(CONFIG_DRM_I915_KMS)
373 MODULE_DEVICE_TABLE(pci, pciidlist);
376 void intel_detect_pch(struct drm_device *dev)
378 struct drm_i915_private *dev_priv = dev->dev_private;
381 /* In all current cases, num_pipes is equivalent to the PCH_NOP setting
382 * (which really amounts to a PCH but no South Display).
384 if (INTEL_INFO(dev)->num_pipes == 0) {
385 dev_priv->pch_type = PCH_NOP;
390 * The reason to probe ISA bridge instead of Dev31:Fun0 is to
391 * make graphics device passthrough work easy for VMM, that only
392 * need to expose ISA bridge to let driver know the real hardware
393 * underneath. This is a requirement from virtualization team.
395 * In some virtualized environments (e.g. XEN), there is irrelevant
396 * ISA bridge in the system. To work reliably, we should scan trhough
397 * all the ISA bridge devices and check for the first match, instead
398 * of only checking the first one.
400 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
402 struct pci_dev *curr = pch;
403 if (pch->vendor == PCI_VENDOR_ID_INTEL) {
405 id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
406 dev_priv->pch_id = id;
408 if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
409 dev_priv->pch_type = PCH_IBX;
410 DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
411 WARN_ON(!IS_GEN5(dev));
412 } else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
413 dev_priv->pch_type = PCH_CPT;
414 DRM_DEBUG_KMS("Found CougarPoint PCH\n");
415 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
416 } else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
417 /* PantherPoint is CPT compatible */
418 dev_priv->pch_type = PCH_CPT;
419 DRM_DEBUG_KMS("Found PantherPoint PCH\n");
420 WARN_ON(!(IS_GEN6(dev) || IS_IVYBRIDGE(dev)));
421 } else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
422 dev_priv->pch_type = PCH_LPT;
423 DRM_DEBUG_KMS("Found LynxPoint PCH\n");
424 WARN_ON(!IS_HASWELL(dev));
425 WARN_ON(IS_ULT(dev));
426 } else if (id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE) {
427 dev_priv->pch_type = PCH_LPT;
428 DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
429 WARN_ON(!IS_HASWELL(dev));
430 WARN_ON(!IS_ULT(dev));
438 pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, curr);
442 DRM_DEBUG_KMS("No PCH found?\n");
445 bool i915_semaphore_is_enabled(struct drm_device *dev)
447 if (INTEL_INFO(dev)->gen < 6)
450 if (i915_semaphores >= 0)
451 return i915_semaphores;
453 #ifdef CONFIG_INTEL_IOMMU
454 /* Enable semaphores on SNB when IO remapping is off */
455 if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
462 static int i915_drm_freeze(struct drm_device *dev)
464 struct drm_i915_private *dev_priv = dev->dev_private;
465 struct drm_crtc *crtc;
467 /* ignore lid events during suspend */
468 mutex_lock(&dev_priv->modeset_restore_lock);
469 dev_priv->modeset_restore = MODESET_SUSPENDED;
470 mutex_unlock(&dev_priv->modeset_restore_lock);
472 /* We do a lot of poking in a lot of registers, make sure they work
474 hsw_disable_package_c8(dev_priv);
475 intel_set_power_well(dev, true);
477 drm_kms_helper_poll_disable(dev);
479 pci_save_state(dev->pdev);
481 /* If KMS is active, we do the leavevt stuff here */
482 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
485 mutex_lock(&dev->struct_mutex);
486 error = i915_gem_idle(dev);
487 mutex_unlock(&dev->struct_mutex);
489 dev_err(&dev->pdev->dev,
490 "GEM idle failed, resume might fail\n");
494 cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
496 drm_irq_uninstall(dev);
497 dev_priv->enable_hotplug_processing = false;
499 * Disable CRTCs directly since we want to preserve sw state
502 list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
503 dev_priv->display.crtc_disable(crtc);
505 intel_modeset_suspend_hw(dev);
508 i915_save_state(dev);
510 intel_opregion_fini(dev);
513 intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
519 int i915_suspend(struct drm_device *dev, pm_message_t state)
523 if (!dev || !dev->dev_private) {
524 DRM_ERROR("dev: %p\n", dev);
525 DRM_ERROR("DRM not initialized, aborting suspend.\n");
529 if (state.event == PM_EVENT_PRETHAW)
533 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
536 error = i915_drm_freeze(dev);
540 if (state.event == PM_EVENT_SUSPEND) {
541 /* Shut down the device */
542 pci_disable_device(dev->pdev);
543 pci_set_power_state(dev->pdev, PCI_D3hot);
549 void intel_console_resume(struct work_struct *work)
551 struct drm_i915_private *dev_priv =
552 container_of(work, struct drm_i915_private,
553 console_resume_work);
554 struct drm_device *dev = dev_priv->dev;
557 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
561 static void intel_resume_hotplug(struct drm_device *dev)
563 struct drm_mode_config *mode_config = &dev->mode_config;
564 struct intel_encoder *encoder;
566 mutex_lock(&mode_config->mutex);
567 DRM_DEBUG_KMS("running encoder hotplug functions\n");
569 list_for_each_entry(encoder, &mode_config->encoder_list, base.head)
570 if (encoder->hot_plug)
571 encoder->hot_plug(encoder);
573 mutex_unlock(&mode_config->mutex);
575 /* Just fire off a uevent and let userspace tell us what to do */
576 drm_helper_hpd_irq_event(dev);
579 static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
581 struct drm_i915_private *dev_priv = dev->dev_private;
584 intel_uncore_early_sanitize(dev);
586 intel_uncore_sanitize(dev);
588 if (drm_core_check_feature(dev, DRIVER_MODESET) &&
589 restore_gtt_mappings) {
590 mutex_lock(&dev->struct_mutex);
591 i915_gem_restore_gtt_mappings(dev);
592 mutex_unlock(&dev->struct_mutex);
595 intel_init_power_well(dev);
597 i915_restore_state(dev);
598 intel_opregion_setup(dev);
600 /* KMS EnterVT equivalent */
601 if (drm_core_check_feature(dev, DRIVER_MODESET)) {
602 intel_init_pch_refclk(dev);
604 mutex_lock(&dev->struct_mutex);
606 error = i915_gem_init_hw(dev);
607 mutex_unlock(&dev->struct_mutex);
609 /* We need working interrupts for modeset enabling ... */
610 drm_irq_install(dev);
612 intel_modeset_init_hw(dev);
614 drm_modeset_lock_all(dev);
615 intel_modeset_setup_hw_state(dev, true);
616 drm_modeset_unlock_all(dev);
619 * ... but also need to make sure that hotplug processing
620 * doesn't cause havoc. Like in the driver load code we don't
621 * bother with the tiny race here where we might loose hotplug
625 dev_priv->enable_hotplug_processing = true;
626 /* Config may have changed between suspend and resume */
627 intel_resume_hotplug(dev);
630 intel_opregion_init(dev);
633 * The console lock can be pretty contented on resume due
634 * to all the printk activity. Try to keep it out of the hot
635 * path of resume if possible.
637 if (console_trylock()) {
638 intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
641 schedule_work(&dev_priv->console_resume_work);
644 /* Undo what we did at i915_drm_freeze so the refcount goes back to the
646 hsw_enable_package_c8(dev_priv);
648 mutex_lock(&dev_priv->modeset_restore_lock);
649 dev_priv->modeset_restore = MODESET_DONE;
650 mutex_unlock(&dev_priv->modeset_restore_lock);
654 static int i915_drm_thaw(struct drm_device *dev)
656 return __i915_drm_thaw(dev, true);
659 int i915_resume(struct drm_device *dev)
661 struct drm_i915_private *dev_priv = dev->dev_private;
664 if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
667 if (pci_enable_device(dev->pdev))
670 pci_set_master(dev->pdev);
673 * Platforms with opregion should have sane BIOS, older ones (gen3 and
674 * earlier) need to restore the GTT mappings since the BIOS might clear
675 * all our scratch PTEs.
677 ret = __i915_drm_thaw(dev, !dev_priv->opregion.header);
681 drm_kms_helper_poll_enable(dev);
686 * i915_reset - reset chip after a hang
687 * @dev: drm device to reset
689 * Reset the chip. Useful if a hang is detected. Returns zero on successful
690 * reset or otherwise an error code.
692 * Procedure is fairly simple:
693 * - reset the chip using the reset reg
694 * - re-init context state
695 * - re-init hardware status page
696 * - re-init ring buffer
697 * - re-init interrupt state
700 int i915_reset(struct drm_device *dev)
702 drm_i915_private_t *dev_priv = dev->dev_private;
709 mutex_lock(&dev->struct_mutex);
713 simulated = dev_priv->gpu_error.stop_rings != 0;
715 ret = intel_gpu_reset(dev);
717 /* Also reset the gpu hangman. */
719 DRM_INFO("Simulated gpu hang, resetting stop_rings\n");
720 dev_priv->gpu_error.stop_rings = 0;
721 if (ret == -ENODEV) {
722 DRM_ERROR("Reset not implemented, but ignoring "
723 "error for simulated gpu hangs\n");
729 DRM_ERROR("Failed to reset chip.\n");
730 mutex_unlock(&dev->struct_mutex);
734 /* Ok, now get things going again... */
737 * Everything depends on having the GTT running, so we need to start
738 * there. Fortunately we don't need to do this unless we reset the
739 * chip at a PCI level.
741 * Next we need to restore the context, but we don't use those
744 * Ring buffer needs to be re-initialized in the KMS case, or if X
745 * was running at the time of the reset (i.e. we weren't VT
748 if (drm_core_check_feature(dev, DRIVER_MODESET) ||
749 !dev_priv->ums.mm_suspended) {
750 struct intel_ring_buffer *ring;
753 dev_priv->ums.mm_suspended = 0;
755 i915_gem_init_swizzling(dev);
757 for_each_ring(ring, dev_priv, i)
760 i915_gem_context_init(dev);
761 if (dev_priv->mm.aliasing_ppgtt) {
762 ret = dev_priv->mm.aliasing_ppgtt->enable(dev);
764 i915_gem_cleanup_aliasing_ppgtt(dev);
768 * It would make sense to re-init all the other hw state, at
769 * least the rps/rc6/emon init done within modeset_init_hw. For
770 * some unknown reason, this blows up my ilk, so don't.
773 mutex_unlock(&dev->struct_mutex);
775 drm_irq_uninstall(dev);
776 drm_irq_install(dev);
779 mutex_unlock(&dev->struct_mutex);
785 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
787 struct intel_device_info *intel_info =
788 (struct intel_device_info *) ent->driver_data;
790 if (IS_PRELIMINARY_HW(intel_info) && !i915_preliminary_hw_support) {
791 DRM_INFO("This hardware requires preliminary hardware support.\n"
792 "See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support\n");
796 /* Only bind to function 0 of the device. Early generations
797 * used function 1 as a placeholder for multi-head. This causes
798 * us confusion instead, especially on the systems where both
799 * functions have the same PCI-ID!
801 if (PCI_FUNC(pdev->devfn))
804 /* We've managed to ship a kms-enabled ddx that shipped with an XvMC
805 * implementation for gen3 (and only gen3) that used legacy drm maps
806 * (gasp!) to share buffers between X and the client. Hence we need to
807 * keep around the fake agp stuff for gen3, even when kms is enabled. */
808 if (intel_info->gen != 3) {
809 driver.driver_features &=
810 ~(DRIVER_USE_AGP | DRIVER_REQUIRE_AGP);
811 } else if (!intel_agp_enabled) {
812 DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
816 return drm_get_pci_dev(pdev, ent, &driver);
820 i915_pci_remove(struct pci_dev *pdev)
822 struct drm_device *dev = pci_get_drvdata(pdev);
827 static int i915_pm_suspend(struct device *dev)
829 struct pci_dev *pdev = to_pci_dev(dev);
830 struct drm_device *drm_dev = pci_get_drvdata(pdev);
833 if (!drm_dev || !drm_dev->dev_private) {
834 dev_err(dev, "DRM not initialized, aborting suspend.\n");
838 if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
841 error = i915_drm_freeze(drm_dev);
845 pci_disable_device(pdev);
846 pci_set_power_state(pdev, PCI_D3hot);
851 static int i915_pm_resume(struct device *dev)
853 struct pci_dev *pdev = to_pci_dev(dev);
854 struct drm_device *drm_dev = pci_get_drvdata(pdev);
856 return i915_resume(drm_dev);
859 static int i915_pm_freeze(struct device *dev)
861 struct pci_dev *pdev = to_pci_dev(dev);
862 struct drm_device *drm_dev = pci_get_drvdata(pdev);
864 if (!drm_dev || !drm_dev->dev_private) {
865 dev_err(dev, "DRM not initialized, aborting suspend.\n");
869 return i915_drm_freeze(drm_dev);
872 static int i915_pm_thaw(struct device *dev)
874 struct pci_dev *pdev = to_pci_dev(dev);
875 struct drm_device *drm_dev = pci_get_drvdata(pdev);
877 return i915_drm_thaw(drm_dev);
880 static int i915_pm_poweroff(struct device *dev)
882 struct pci_dev *pdev = to_pci_dev(dev);
883 struct drm_device *drm_dev = pci_get_drvdata(pdev);
885 return i915_drm_freeze(drm_dev);
888 static const struct dev_pm_ops i915_pm_ops = {
889 .suspend = i915_pm_suspend,
890 .resume = i915_pm_resume,
891 .freeze = i915_pm_freeze,
892 .thaw = i915_pm_thaw,
893 .poweroff = i915_pm_poweroff,
894 .restore = i915_pm_resume,
897 static const struct vm_operations_struct i915_gem_vm_ops = {
898 .fault = i915_gem_fault,
899 .open = drm_gem_vm_open,
900 .close = drm_gem_vm_close,
903 static const struct file_operations i915_driver_fops = {
904 .owner = THIS_MODULE,
906 .release = drm_release,
907 .unlocked_ioctl = drm_ioctl,
908 .mmap = drm_gem_mmap,
912 .compat_ioctl = i915_compat_ioctl,
914 .llseek = noop_llseek,
917 static struct drm_driver driver = {
918 /* Don't use MTRRs here; the Xserver or userspace app should
919 * deal with them for Intel hardware.
922 DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
923 DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
925 .load = i915_driver_load,
926 .unload = i915_driver_unload,
927 .open = i915_driver_open,
928 .lastclose = i915_driver_lastclose,
929 .preclose = i915_driver_preclose,
930 .postclose = i915_driver_postclose,
932 /* Used in place of i915_pm_ops for non-DRIVER_MODESET */
933 .suspend = i915_suspend,
934 .resume = i915_resume,
936 .device_is_agp = i915_driver_device_is_agp,
937 .master_create = i915_master_create,
938 .master_destroy = i915_master_destroy,
939 #if defined(CONFIG_DEBUG_FS)
940 .debugfs_init = i915_debugfs_init,
941 .debugfs_cleanup = i915_debugfs_cleanup,
943 .gem_free_object = i915_gem_free_object,
944 .gem_vm_ops = &i915_gem_vm_ops,
946 .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
947 .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
948 .gem_prime_export = i915_gem_prime_export,
949 .gem_prime_import = i915_gem_prime_import,
951 .dumb_create = i915_gem_dumb_create,
952 .dumb_map_offset = i915_gem_mmap_gtt,
953 .dumb_destroy = drm_gem_dumb_destroy,
954 .ioctls = i915_ioctls,
955 .fops = &i915_driver_fops,
959 .major = DRIVER_MAJOR,
960 .minor = DRIVER_MINOR,
961 .patchlevel = DRIVER_PATCHLEVEL,
964 static struct pci_driver i915_pci_driver = {
966 .id_table = pciidlist,
967 .probe = i915_pci_probe,
968 .remove = i915_pci_remove,
969 .driver.pm = &i915_pm_ops,
972 static int __init i915_init(void)
974 driver.num_ioctls = i915_max_ioctl;
977 * If CONFIG_DRM_I915_KMS is set, default to KMS unless
978 * explicitly disabled with the module pararmeter.
980 * Otherwise, just follow the parameter (defaulting to off).
982 * Allow optional vga_text_mode_force boot option to override
983 * the default behavior.
985 #if defined(CONFIG_DRM_I915_KMS)
986 if (i915_modeset != 0)
987 driver.driver_features |= DRIVER_MODESET;
989 if (i915_modeset == 1)
990 driver.driver_features |= DRIVER_MODESET;
992 #ifdef CONFIG_VGA_CONSOLE
993 if (vgacon_text_force() && i915_modeset == -1)
994 driver.driver_features &= ~DRIVER_MODESET;
997 if (!(driver.driver_features & DRIVER_MODESET))
998 driver.get_vblank_timestamp = NULL;
1000 return drm_pci_init(&driver, &i915_pci_driver);
1003 static void __exit i915_exit(void)
1005 drm_pci_exit(&driver, &i915_pci_driver);
1008 module_init(i915_init);
1009 module_exit(i915_exit);
1011 MODULE_AUTHOR(DRIVER_AUTHOR);
1012 MODULE_DESCRIPTION(DRIVER_DESC);
1013 MODULE_LICENSE("GPL and additional rights");