]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/media/pci/saa7164/saa7164-core.c
saa7164: use pci_set_dma_mask insted of pci_dma_supported
[karo-tx-linux.git] / drivers / media / pci / saa7164 / saa7164-core.c
1 /*
2  *  Driver for the NXP SAA7164 PCIe bridge
3  *
4  *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2 of the License, or
9  *  (at your option) any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *
15  *  GNU General Public License for more details.
16  *
17  *  You should have received a copy of the GNU General Public License
18  *  along with this program; if not, write to the Free Software
19  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21
22 #include <linux/init.h>
23 #include <linux/list.h>
24 #include <linux/module.h>
25 #include <linux/moduleparam.h>
26 #include <linux/kmod.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/interrupt.h>
30 #include <linux/delay.h>
31 #include <asm/div64.h>
32
33 #ifdef CONFIG_PROC_FS
34 #include <linux/proc_fs.h>
35 #endif
36 #include "saa7164.h"
37
38 MODULE_DESCRIPTION("Driver for NXP SAA7164 based TV cards");
39 MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>");
40 MODULE_LICENSE("GPL");
41
42 /*
43  *  1 Basic
44  *  2
45  *  4 i2c
46  *  8 api
47  * 16 cmd
48  * 32 bus
49  */
50
51 unsigned int saa_debug;
52 module_param_named(debug, saa_debug, int, 0644);
53 MODULE_PARM_DESC(debug, "enable debug messages");
54
55 static unsigned int fw_debug;
56 module_param(fw_debug, int, 0644);
57 MODULE_PARM_DESC(fw_debug, "Firmware debug level def:2");
58
59 unsigned int encoder_buffers = SAA7164_MAX_ENCODER_BUFFERS;
60 module_param(encoder_buffers, int, 0644);
61 MODULE_PARM_DESC(encoder_buffers, "Total buffers in read queue 16-512 def:64");
62
63 unsigned int vbi_buffers = SAA7164_MAX_VBI_BUFFERS;
64 module_param(vbi_buffers, int, 0644);
65 MODULE_PARM_DESC(vbi_buffers, "Total buffers in read queue 16-512 def:64");
66
67 unsigned int waitsecs = 10;
68 module_param(waitsecs, int, 0644);
69 MODULE_PARM_DESC(waitsecs, "timeout on firmware messages");
70
71 static unsigned int card[]  = {[0 ... (SAA7164_MAXBOARDS - 1)] = UNSET };
72 module_param_array(card,  int, NULL, 0444);
73 MODULE_PARM_DESC(card, "card type");
74
75 static unsigned int print_histogram = 64;
76 module_param(print_histogram, int, 0644);
77 MODULE_PARM_DESC(print_histogram, "print histogram values once");
78
79 unsigned int crc_checking = 1;
80 module_param(crc_checking, int, 0644);
81 MODULE_PARM_DESC(crc_checking, "enable crc sanity checking on buffers");
82
83 static unsigned int guard_checking = 1;
84 module_param(guard_checking, int, 0644);
85 MODULE_PARM_DESC(guard_checking,
86         "enable dma sanity checking for buffer overruns");
87
88 static bool enable_msi = true;
89 module_param(enable_msi, bool, 0444);
90 MODULE_PARM_DESC(enable_msi,
91                 "enable the use of an msi interrupt if available");
92
93 static unsigned int saa7164_devcount;
94
95 static DEFINE_MUTEX(devlist);
96 LIST_HEAD(saa7164_devlist);
97
98 #define INT_SIZE 16
99
100 static void saa7164_pack_verifier(struct saa7164_buffer *buf)
101 {
102         u8 *p = (u8 *)buf->cpu;
103         int i;
104
105         for (i = 0; i < buf->actual_size; i += 2048) {
106
107                 if ((*(p + i + 0) != 0x00) || (*(p + i + 1) != 0x00) ||
108                         (*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) {
109                         printk(KERN_ERR "No pack at 0x%x\n", i);
110 #if 0
111                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
112                                        p + 1, 32, false);
113 #endif
114                 }
115         }
116 }
117
118 #define FIXED_VIDEO_PID 0xf1
119 #define FIXED_AUDIO_PID 0xf2
120
121 static void saa7164_ts_verifier(struct saa7164_buffer *buf)
122 {
123         struct saa7164_port *port = buf->port;
124         u32 i;
125         u8 cc, a;
126         u16 pid;
127         u8 *bufcpu = (u8 *)buf->cpu;
128
129         port->sync_errors = 0;
130         port->v_cc_errors = 0;
131         port->a_cc_errors = 0;
132
133         for (i = 0; i < buf->actual_size; i += 188) {
134                 if (*(bufcpu + i) != 0x47)
135                         port->sync_errors++;
136
137                 /* TODO: Query pid lower 8 bits, ignoring upper bits intensionally */
138                 pid = ((*(bufcpu + i + 1) & 0x1f) << 8) | *(bufcpu + i + 2);
139                 cc = *(bufcpu + i + 3) & 0x0f;
140
141                 if (pid == FIXED_VIDEO_PID) {
142                         a = ((port->last_v_cc + 1) & 0x0f);
143                         if (a != cc) {
144                                 printk(KERN_ERR "video cc last = %x current = %x i = %d\n",
145                                         port->last_v_cc, cc, i);
146                                 port->v_cc_errors++;
147                         }
148
149                         port->last_v_cc = cc;
150                 } else
151                 if (pid == FIXED_AUDIO_PID) {
152                         a = ((port->last_a_cc + 1) & 0x0f);
153                         if (a != cc) {
154                                 printk(KERN_ERR "audio cc last = %x current = %x i = %d\n",
155                                         port->last_a_cc, cc, i);
156                                 port->a_cc_errors++;
157                         }
158
159                         port->last_a_cc = cc;
160                 }
161
162         }
163
164         /* Only report errors if we've been through this function atleast
165          * once already and the cached cc values are primed. First time through
166          * always generates errors.
167          */
168         if (port->v_cc_errors && (port->done_first_interrupt > 1))
169                 printk(KERN_ERR "video pid cc, %d errors\n", port->v_cc_errors);
170
171         if (port->a_cc_errors && (port->done_first_interrupt > 1))
172                 printk(KERN_ERR "audio pid cc, %d errors\n", port->a_cc_errors);
173
174         if (port->sync_errors && (port->done_first_interrupt > 1))
175                 printk(KERN_ERR "sync_errors = %d\n", port->sync_errors);
176
177         if (port->done_first_interrupt == 1)
178                 port->done_first_interrupt++;
179 }
180
181 static void saa7164_histogram_reset(struct saa7164_histogram *hg, char *name)
182 {
183         int i;
184
185         memset(hg, 0, sizeof(struct saa7164_histogram));
186         strcpy(hg->name, name);
187
188         /* First 30ms x 1ms */
189         for (i = 0; i < 30; i++)
190                 hg->counter1[0 + i].val = i;
191
192         /* 30 - 200ms x 10ms  */
193         for (i = 0; i < 18; i++)
194                 hg->counter1[30 + i].val = 30 + (i * 10);
195
196         /* 200 - 2000ms x 100ms  */
197         for (i = 0; i < 15; i++)
198                 hg->counter1[48 + i].val = 200 + (i * 200);
199
200         /* Catch all massive value (2secs) */
201         hg->counter1[55].val = 2000;
202
203         /* Catch all massive value (4secs) */
204         hg->counter1[56].val = 4000;
205
206         /* Catch all massive value (8secs) */
207         hg->counter1[57].val = 8000;
208
209         /* Catch all massive value (15secs) */
210         hg->counter1[58].val = 15000;
211
212         /* Catch all massive value (30secs) */
213         hg->counter1[59].val = 30000;
214
215         /* Catch all massive value (60secs) */
216         hg->counter1[60].val = 60000;
217
218         /* Catch all massive value (5mins) */
219         hg->counter1[61].val = 300000;
220
221         /* Catch all massive value (15mins) */
222         hg->counter1[62].val = 900000;
223
224         /* Catch all massive values (1hr) */
225         hg->counter1[63].val = 3600000;
226 }
227
228 void saa7164_histogram_update(struct saa7164_histogram *hg, u32 val)
229 {
230         int i;
231         for (i = 0; i < 64; i++) {
232                 if (val <= hg->counter1[i].val) {
233                         hg->counter1[i].count++;
234                         hg->counter1[i].update_time = jiffies;
235                         break;
236                 }
237         }
238 }
239
240 static void saa7164_histogram_print(struct saa7164_port *port,
241         struct saa7164_histogram *hg)
242 {
243         u32 entries = 0;
244         int i;
245
246         printk(KERN_ERR "Histogram named %s (ms, count, last_update_jiffy)\n", hg->name);
247         for (i = 0; i < 64; i++) {
248                 if (hg->counter1[i].count == 0)
249                         continue;
250
251                 printk(KERN_ERR " %4d %12d %Ld\n",
252                         hg->counter1[i].val,
253                         hg->counter1[i].count,
254                         hg->counter1[i].update_time);
255
256                 entries++;
257         }
258         printk(KERN_ERR "Total: %d\n", entries);
259 }
260
261 static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr)
262 {
263         struct saa7164_dev *dev = port->dev;
264         struct saa7164_buffer *buf = NULL;
265         struct saa7164_user_buffer *ubuf = NULL;
266         struct list_head *c, *n;
267         int i = 0;
268         u8 *p;
269
270         mutex_lock(&port->dmaqueue_lock);
271         list_for_each_safe(c, n, &port->dmaqueue.list) {
272
273                 buf = list_entry(c, struct saa7164_buffer, list);
274                 if (i++ > port->hwcfg.buffercount) {
275                         printk(KERN_ERR "%s() illegal i count %d\n",
276                                 __func__, i);
277                         break;
278                 }
279
280                 if (buf->idx == bufnr) {
281
282                         /* Found the buffer, deal with it */
283                         dprintk(DBGLVL_IRQ, "%s() bufnr: %d\n", __func__, bufnr);
284
285                         if (crc_checking) {
286                                 /* Throw a new checksum on the dma buffer */
287                                 buf->crc = crc32(0, buf->cpu, buf->actual_size);
288                         }
289
290                         if (guard_checking) {
291                                 p = (u8 *)buf->cpu;
292                                 if ((*(p + buf->actual_size + 0) != 0xff) ||
293                                         (*(p + buf->actual_size + 1) != 0xff) ||
294                                         (*(p + buf->actual_size + 2) != 0xff) ||
295                                         (*(p + buf->actual_size + 3) != 0xff) ||
296                                         (*(p + buf->actual_size + 0x10) != 0xff) ||
297                                         (*(p + buf->actual_size + 0x11) != 0xff) ||
298                                         (*(p + buf->actual_size + 0x12) != 0xff) ||
299                                         (*(p + buf->actual_size + 0x13) != 0xff)) {
300                                                 printk(KERN_ERR "%s() buf %p guard buffer breach\n",
301                                                         __func__, buf);
302 #if 0
303                         print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1,
304                                        p + buf->actual_size - 32, 64, false);
305 #endif
306                                 }
307                         }
308
309                         if ((port->nr != SAA7164_PORT_VBI1) && (port->nr != SAA7164_PORT_VBI2)) {
310                                 /* Validate the incoming buffer content */
311                                 if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_TS)
312                                         saa7164_ts_verifier(buf);
313                                 else if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS)
314                                         saa7164_pack_verifier(buf);
315                         }
316
317                         /* find a free user buffer and clone to it */
318                         if (!list_empty(&port->list_buf_free.list)) {
319
320                                 /* Pull the first buffer from the used list */
321                                 ubuf = list_first_entry(&port->list_buf_free.list,
322                                         struct saa7164_user_buffer, list);
323
324                                 if (buf->actual_size <= ubuf->actual_size) {
325
326                                         memcpy(ubuf->data, buf->cpu, ubuf->actual_size);
327
328                                         if (crc_checking) {
329                                                 /* Throw a new checksum on the read buffer */
330                                                 ubuf->crc = crc32(0, ubuf->data, ubuf->actual_size);
331                                         }
332
333                                         /* Requeue the buffer on the free list */
334                                         ubuf->pos = 0;
335
336                                         list_move_tail(&ubuf->list,
337                                                 &port->list_buf_used.list);
338
339                                         /* Flag any userland waiters */
340                                         wake_up_interruptible(&port->wait_read);
341
342                                 } else {
343                                         printk(KERN_ERR "buf %p bufsize fails match\n", buf);
344                                 }
345
346                         } else
347                                 printk(KERN_ERR "encirq no free buffers, increase param encoder_buffers\n");
348
349                         /* Ensure offset into buffer remains 0, fill buffer
350                          * with known bad data. We check for this data at a later point
351                          * in time. */
352                         saa7164_buffer_zero_offsets(port, bufnr);
353                         memset(buf->cpu, 0xff, buf->pci_size);
354                         if (crc_checking) {
355                                 /* Throw yet aanother new checksum on the dma buffer */
356                                 buf->crc = crc32(0, buf->cpu, buf->actual_size);
357                         }
358
359                         break;
360                 }
361         }
362         mutex_unlock(&port->dmaqueue_lock);
363 }
364
365 static void saa7164_work_enchandler(struct work_struct *w)
366 {
367         struct saa7164_port *port =
368                 container_of(w, struct saa7164_port, workenc);
369         struct saa7164_dev *dev = port->dev;
370
371         u32 wp, mcb, rp, cnt = 0;
372
373         port->last_svc_msecs_diff = port->last_svc_msecs;
374         port->last_svc_msecs = jiffies_to_msecs(jiffies);
375
376         port->last_svc_msecs_diff = port->last_svc_msecs -
377                 port->last_svc_msecs_diff;
378
379         saa7164_histogram_update(&port->svc_interval,
380                 port->last_svc_msecs_diff);
381
382         port->last_irq_svc_msecs_diff = port->last_svc_msecs -
383                 port->last_irq_msecs;
384
385         saa7164_histogram_update(&port->irq_svc_interval,
386                 port->last_irq_svc_msecs_diff);
387
388         dprintk(DBGLVL_IRQ,
389                 "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n",
390                 __func__,
391                 port->last_svc_msecs_diff,
392                 port->last_irq_svc_msecs_diff,
393                 port->last_svc_wp,
394                 port->last_svc_rp
395                 );
396
397         /* Current write position */
398         wp = saa7164_readl(port->bufcounter);
399         if (wp > (port->hwcfg.buffercount - 1)) {
400                 printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
401                 return;
402         }
403
404         /* Most current complete buffer */
405         if (wp == 0)
406                 mcb = (port->hwcfg.buffercount - 1);
407         else
408                 mcb = wp - 1;
409
410         while (1) {
411                 if (port->done_first_interrupt == 0) {
412                         port->done_first_interrupt++;
413                         rp = mcb;
414                 } else
415                         rp = (port->last_svc_rp + 1) % 8;
416
417                 if (rp > (port->hwcfg.buffercount - 1)) {
418                         printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
419                         break;
420                 }
421
422                 saa7164_work_enchandler_helper(port, rp);
423                 port->last_svc_rp = rp;
424                 cnt++;
425
426                 if (rp == mcb)
427                         break;
428         }
429
430         /* TODO: Convert this into a /proc/saa7164 style readable file */
431         if (print_histogram == port->nr) {
432                 saa7164_histogram_print(port, &port->irq_interval);
433                 saa7164_histogram_print(port, &port->svc_interval);
434                 saa7164_histogram_print(port, &port->irq_svc_interval);
435                 saa7164_histogram_print(port, &port->read_interval);
436                 saa7164_histogram_print(port, &port->poll_interval);
437                 /* TODO: fix this to preserve any previous state */
438                 print_histogram = 64 + port->nr;
439         }
440 }
441
442 static void saa7164_work_vbihandler(struct work_struct *w)
443 {
444         struct saa7164_port *port =
445                 container_of(w, struct saa7164_port, workenc);
446         struct saa7164_dev *dev = port->dev;
447
448         u32 wp, mcb, rp, cnt = 0;
449
450         port->last_svc_msecs_diff = port->last_svc_msecs;
451         port->last_svc_msecs = jiffies_to_msecs(jiffies);
452         port->last_svc_msecs_diff = port->last_svc_msecs -
453                 port->last_svc_msecs_diff;
454
455         saa7164_histogram_update(&port->svc_interval,
456                 port->last_svc_msecs_diff);
457
458         port->last_irq_svc_msecs_diff = port->last_svc_msecs -
459                 port->last_irq_msecs;
460
461         saa7164_histogram_update(&port->irq_svc_interval,
462                 port->last_irq_svc_msecs_diff);
463
464         dprintk(DBGLVL_IRQ,
465                 "%s() %Ldms elapsed irq->deferred %Ldms wp: %d rp: %d\n",
466                 __func__,
467                 port->last_svc_msecs_diff,
468                 port->last_irq_svc_msecs_diff,
469                 port->last_svc_wp,
470                 port->last_svc_rp
471                 );
472
473         /* Current write position */
474         wp = saa7164_readl(port->bufcounter);
475         if (wp > (port->hwcfg.buffercount - 1)) {
476                 printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
477                 return;
478         }
479
480         /* Most current complete buffer */
481         if (wp == 0)
482                 mcb = (port->hwcfg.buffercount - 1);
483         else
484                 mcb = wp - 1;
485
486         while (1) {
487                 if (port->done_first_interrupt == 0) {
488                         port->done_first_interrupt++;
489                         rp = mcb;
490                 } else
491                         rp = (port->last_svc_rp + 1) % 8;
492
493                 if (rp > (port->hwcfg.buffercount - 1)) {
494                         printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
495                         break;
496                 }
497
498                 saa7164_work_enchandler_helper(port, rp);
499                 port->last_svc_rp = rp;
500                 cnt++;
501
502                 if (rp == mcb)
503                         break;
504         }
505
506         /* TODO: Convert this into a /proc/saa7164 style readable file */
507         if (print_histogram == port->nr) {
508                 saa7164_histogram_print(port, &port->irq_interval);
509                 saa7164_histogram_print(port, &port->svc_interval);
510                 saa7164_histogram_print(port, &port->irq_svc_interval);
511                 saa7164_histogram_print(port, &port->read_interval);
512                 saa7164_histogram_print(port, &port->poll_interval);
513                 /* TODO: fix this to preserve any previous state */
514                 print_histogram = 64 + port->nr;
515         }
516 }
517
518 static void saa7164_work_cmdhandler(struct work_struct *w)
519 {
520         struct saa7164_dev *dev = container_of(w, struct saa7164_dev, workcmd);
521
522         /* Wake up any complete commands */
523         saa7164_irq_dequeue(dev);
524 }
525
526 static void saa7164_buffer_deliver(struct saa7164_buffer *buf)
527 {
528         struct saa7164_port *port = buf->port;
529
530         /* Feed the transport payload into the kernel demux */
531         dvb_dmx_swfilter_packets(&port->dvb.demux, (u8 *)buf->cpu,
532                 SAA7164_TS_NUMBER_OF_LINES);
533
534 }
535
536 static irqreturn_t saa7164_irq_vbi(struct saa7164_port *port)
537 {
538         struct saa7164_dev *dev = port->dev;
539
540         /* Store old time */
541         port->last_irq_msecs_diff = port->last_irq_msecs;
542
543         /* Collect new stats */
544         port->last_irq_msecs = jiffies_to_msecs(jiffies);
545
546         /* Calculate stats */
547         port->last_irq_msecs_diff = port->last_irq_msecs -
548                 port->last_irq_msecs_diff;
549
550         saa7164_histogram_update(&port->irq_interval,
551                 port->last_irq_msecs_diff);
552
553         dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__,
554                 port->last_irq_msecs_diff);
555
556         /* Tis calls the vbi irq handler */
557         schedule_work(&port->workenc);
558         return 0;
559 }
560
561 static irqreturn_t saa7164_irq_encoder(struct saa7164_port *port)
562 {
563         struct saa7164_dev *dev = port->dev;
564
565         /* Store old time */
566         port->last_irq_msecs_diff = port->last_irq_msecs;
567
568         /* Collect new stats */
569         port->last_irq_msecs = jiffies_to_msecs(jiffies);
570
571         /* Calculate stats */
572         port->last_irq_msecs_diff = port->last_irq_msecs -
573                 port->last_irq_msecs_diff;
574
575         saa7164_histogram_update(&port->irq_interval,
576                 port->last_irq_msecs_diff);
577
578         dprintk(DBGLVL_IRQ, "%s() %Ldms elapsed\n", __func__,
579                 port->last_irq_msecs_diff);
580
581         schedule_work(&port->workenc);
582         return 0;
583 }
584
585 static irqreturn_t saa7164_irq_ts(struct saa7164_port *port)
586 {
587         struct saa7164_dev *dev = port->dev;
588         struct saa7164_buffer *buf;
589         struct list_head *c, *n;
590         int wp, i = 0, rp;
591
592         /* Find the current write point from the hardware */
593         wp = saa7164_readl(port->bufcounter);
594         if (wp > (port->hwcfg.buffercount - 1))
595                 BUG();
596
597         /* Find the previous buffer to the current write point */
598         if (wp == 0)
599                 rp = (port->hwcfg.buffercount - 1);
600         else
601                 rp = wp - 1;
602
603         /* Lookup the WP in the buffer list */
604         /* TODO: turn this into a worker thread */
605         list_for_each_safe(c, n, &port->dmaqueue.list) {
606                 buf = list_entry(c, struct saa7164_buffer, list);
607                 if (i++ > port->hwcfg.buffercount)
608                         BUG();
609
610                 if (buf->idx == rp) {
611                         /* Found the buffer, deal with it */
612                         dprintk(DBGLVL_IRQ, "%s() wp: %d processing: %d\n",
613                                 __func__, wp, rp);
614                         saa7164_buffer_deliver(buf);
615                         break;
616                 }
617
618         }
619         return 0;
620 }
621
622 /* Primary IRQ handler and dispatch mechanism */
623 static irqreturn_t saa7164_irq(int irq, void *dev_id)
624 {
625         struct saa7164_dev *dev = dev_id;
626         struct saa7164_port *porta, *portb, *portc, *portd, *porte, *portf;
627
628         u32 intid, intstat[INT_SIZE/4];
629         int i, handled = 0, bit;
630
631         if (dev == NULL) {
632                 printk(KERN_ERR "%s() No device specified\n", __func__);
633                 handled = 0;
634                 goto out;
635         }
636
637         porta = &dev->ports[SAA7164_PORT_TS1];
638         portb = &dev->ports[SAA7164_PORT_TS2];
639         portc = &dev->ports[SAA7164_PORT_ENC1];
640         portd = &dev->ports[SAA7164_PORT_ENC2];
641         porte = &dev->ports[SAA7164_PORT_VBI1];
642         portf = &dev->ports[SAA7164_PORT_VBI2];
643
644         /* Check that the hardware is accessible. If the status bytes are
645          * 0xFF then the device is not accessible, the the IRQ belongs
646          * to another driver.
647          * 4 x u32 interrupt registers.
648          */
649         for (i = 0; i < INT_SIZE/4; i++) {
650
651                 /* TODO: Convert into saa7164_readl() */
652                 /* Read the 4 hardware interrupt registers */
653                 intstat[i] = saa7164_readl(dev->int_status + (i * 4));
654
655                 if (intstat[i])
656                         handled = 1;
657         }
658         if (handled == 0)
659                 goto out;
660
661         /* For each of the HW interrupt registers */
662         for (i = 0; i < INT_SIZE/4; i++) {
663
664                 if (intstat[i]) {
665                         /* Each function of the board has it's own interruptid.
666                          * Find the function that triggered then call
667                          * it's handler.
668                          */
669                         for (bit = 0; bit < 32; bit++) {
670
671                                 if (((intstat[i] >> bit) & 0x00000001) == 0)
672                                         continue;
673
674                                 /* Calculate the interrupt id (0x00 to 0x7f) */
675
676                                 intid = (i * 32) + bit;
677                                 if (intid == dev->intfdesc.bInterruptId) {
678                                         /* A response to an cmd/api call */
679                                         schedule_work(&dev->workcmd);
680                                 } else if (intid == porta->hwcfg.interruptid) {
681
682                                         /* Transport path 1 */
683                                         saa7164_irq_ts(porta);
684
685                                 } else if (intid == portb->hwcfg.interruptid) {
686
687                                         /* Transport path 2 */
688                                         saa7164_irq_ts(portb);
689
690                                 } else if (intid == portc->hwcfg.interruptid) {
691
692                                         /* Encoder path 1 */
693                                         saa7164_irq_encoder(portc);
694
695                                 } else if (intid == portd->hwcfg.interruptid) {
696
697                                         /* Encoder path 2 */
698                                         saa7164_irq_encoder(portd);
699
700                                 } else if (intid == porte->hwcfg.interruptid) {
701
702                                         /* VBI path 1 */
703                                         saa7164_irq_vbi(porte);
704
705                                 } else if (intid == portf->hwcfg.interruptid) {
706
707                                         /* VBI path 2 */
708                                         saa7164_irq_vbi(portf);
709
710                                 } else {
711                                         /* Find the function */
712                                         dprintk(DBGLVL_IRQ,
713                                                 "%s() unhandled interrupt "
714                                                 "reg 0x%x bit 0x%x "
715                                                 "intid = 0x%x\n",
716                                                 __func__, i, bit, intid);
717                                 }
718                         }
719
720                         /* Ack it */
721                         saa7164_writel(dev->int_ack + (i * 4), intstat[i]);
722
723                 }
724         }
725 out:
726         return IRQ_RETVAL(handled);
727 }
728
729 void saa7164_getfirmwarestatus(struct saa7164_dev *dev)
730 {
731         struct saa7164_fw_status *s = &dev->fw_status;
732
733         dev->fw_status.status = saa7164_readl(SAA_DEVICE_SYSINIT_STATUS);
734         dev->fw_status.mode = saa7164_readl(SAA_DEVICE_SYSINIT_MODE);
735         dev->fw_status.spec = saa7164_readl(SAA_DEVICE_SYSINIT_SPEC);
736         dev->fw_status.inst = saa7164_readl(SAA_DEVICE_SYSINIT_INST);
737         dev->fw_status.cpuload = saa7164_readl(SAA_DEVICE_SYSINIT_CPULOAD);
738         dev->fw_status.remainheap =
739                 saa7164_readl(SAA_DEVICE_SYSINIT_REMAINHEAP);
740
741         dprintk(1, "Firmware status:\n");
742         dprintk(1, " .status     = 0x%08x\n", s->status);
743         dprintk(1, " .mode       = 0x%08x\n", s->mode);
744         dprintk(1, " .spec       = 0x%08x\n", s->spec);
745         dprintk(1, " .inst       = 0x%08x\n", s->inst);
746         dprintk(1, " .cpuload    = 0x%08x\n", s->cpuload);
747         dprintk(1, " .remainheap = 0x%08x\n", s->remainheap);
748 }
749
750 u32 saa7164_getcurrentfirmwareversion(struct saa7164_dev *dev)
751 {
752         u32 reg;
753
754         reg = saa7164_readl(SAA_DEVICE_VERSION);
755         dprintk(1, "Device running firmware version %d.%d.%d.%d (0x%x)\n",
756                 (reg & 0x0000fc00) >> 10,
757                 (reg & 0x000003e0) >> 5,
758                 (reg & 0x0000001f),
759                 (reg & 0xffff0000) >> 16,
760                 reg);
761
762         return reg;
763 }
764
765 /* TODO: Debugging func, remove */
766 void saa7164_dumpregs(struct saa7164_dev *dev, u32 addr)
767 {
768         int i;
769
770         dprintk(1, "--------------------> "
771                 "00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
772
773         for (i = 0; i < 0x100; i += 16)
774                 dprintk(1, "region0[0x%08x] = "
775                         "%02x %02x %02x %02x %02x %02x %02x %02x"
776                         " %02x %02x %02x %02x %02x %02x %02x %02x\n", i,
777                         (u8)saa7164_readb(addr + i + 0),
778                         (u8)saa7164_readb(addr + i + 1),
779                         (u8)saa7164_readb(addr + i + 2),
780                         (u8)saa7164_readb(addr + i + 3),
781                         (u8)saa7164_readb(addr + i + 4),
782                         (u8)saa7164_readb(addr + i + 5),
783                         (u8)saa7164_readb(addr + i + 6),
784                         (u8)saa7164_readb(addr + i + 7),
785                         (u8)saa7164_readb(addr + i + 8),
786                         (u8)saa7164_readb(addr + i + 9),
787                         (u8)saa7164_readb(addr + i + 10),
788                         (u8)saa7164_readb(addr + i + 11),
789                         (u8)saa7164_readb(addr + i + 12),
790                         (u8)saa7164_readb(addr + i + 13),
791                         (u8)saa7164_readb(addr + i + 14),
792                         (u8)saa7164_readb(addr + i + 15)
793                         );
794 }
795
796 static void saa7164_dump_hwdesc(struct saa7164_dev *dev)
797 {
798         dprintk(1, "@0x%p hwdesc sizeof(struct tmComResHWDescr) = %d bytes\n",
799                 &dev->hwdesc, (u32)sizeof(struct tmComResHWDescr));
800
801         dprintk(1, " .bLength = 0x%x\n", dev->hwdesc.bLength);
802         dprintk(1, " .bDescriptorType = 0x%x\n", dev->hwdesc.bDescriptorType);
803         dprintk(1, " .bDescriptorSubtype = 0x%x\n",
804                 dev->hwdesc.bDescriptorSubtype);
805
806         dprintk(1, " .bcdSpecVersion = 0x%x\n", dev->hwdesc.bcdSpecVersion);
807         dprintk(1, " .dwClockFrequency = 0x%x\n", dev->hwdesc.dwClockFrequency);
808         dprintk(1, " .dwClockUpdateRes = 0x%x\n", dev->hwdesc.dwClockUpdateRes);
809         dprintk(1, " .bCapabilities = 0x%x\n", dev->hwdesc.bCapabilities);
810         dprintk(1, " .dwDeviceRegistersLocation = 0x%x\n",
811                 dev->hwdesc.dwDeviceRegistersLocation);
812
813         dprintk(1, " .dwHostMemoryRegion = 0x%x\n",
814                 dev->hwdesc.dwHostMemoryRegion);
815
816         dprintk(1, " .dwHostMemoryRegionSize = 0x%x\n",
817                 dev->hwdesc.dwHostMemoryRegionSize);
818
819         dprintk(1, " .dwHostHibernatMemRegion = 0x%x\n",
820                 dev->hwdesc.dwHostHibernatMemRegion);
821
822         dprintk(1, " .dwHostHibernatMemRegionSize = 0x%x\n",
823                 dev->hwdesc.dwHostHibernatMemRegionSize);
824 }
825
826 static void saa7164_dump_intfdesc(struct saa7164_dev *dev)
827 {
828         dprintk(1, "@0x%p intfdesc "
829                 "sizeof(struct tmComResInterfaceDescr) = %d bytes\n",
830                 &dev->intfdesc, (u32)sizeof(struct tmComResInterfaceDescr));
831
832         dprintk(1, " .bLength = 0x%x\n", dev->intfdesc.bLength);
833         dprintk(1, " .bDescriptorType = 0x%x\n", dev->intfdesc.bDescriptorType);
834         dprintk(1, " .bDescriptorSubtype = 0x%x\n",
835                 dev->intfdesc.bDescriptorSubtype);
836
837         dprintk(1, " .bFlags = 0x%x\n", dev->intfdesc.bFlags);
838         dprintk(1, " .bInterfaceType = 0x%x\n", dev->intfdesc.bInterfaceType);
839         dprintk(1, " .bInterfaceId = 0x%x\n", dev->intfdesc.bInterfaceId);
840         dprintk(1, " .bBaseInterface = 0x%x\n", dev->intfdesc.bBaseInterface);
841         dprintk(1, " .bInterruptId = 0x%x\n", dev->intfdesc.bInterruptId);
842         dprintk(1, " .bDebugInterruptId = 0x%x\n",
843                 dev->intfdesc.bDebugInterruptId);
844
845         dprintk(1, " .BARLocation = 0x%x\n", dev->intfdesc.BARLocation);
846 }
847
848 static void saa7164_dump_busdesc(struct saa7164_dev *dev)
849 {
850         dprintk(1, "@0x%p busdesc sizeof(struct tmComResBusDescr) = %d bytes\n",
851                 &dev->busdesc, (u32)sizeof(struct tmComResBusDescr));
852
853         dprintk(1, " .CommandRing   = 0x%016Lx\n", dev->busdesc.CommandRing);
854         dprintk(1, " .ResponseRing  = 0x%016Lx\n", dev->busdesc.ResponseRing);
855         dprintk(1, " .CommandWrite  = 0x%x\n", dev->busdesc.CommandWrite);
856         dprintk(1, " .CommandRead   = 0x%x\n", dev->busdesc.CommandRead);
857         dprintk(1, " .ResponseWrite = 0x%x\n", dev->busdesc.ResponseWrite);
858         dprintk(1, " .ResponseRead  = 0x%x\n", dev->busdesc.ResponseRead);
859 }
860
861 /* Much of the hardware configuration and PCI registers are configured
862  * dynamically depending on firmware. We have to cache some initial
863  * structures then use these to locate other important structures
864  * from PCI space.
865  */
866 static void saa7164_get_descriptors(struct saa7164_dev *dev)
867 {
868         memcpy_fromio(&dev->hwdesc, dev->bmmio, sizeof(struct tmComResHWDescr));
869         memcpy_fromio(&dev->intfdesc, dev->bmmio + sizeof(struct tmComResHWDescr),
870                 sizeof(struct tmComResInterfaceDescr));
871         memcpy_fromio(&dev->busdesc, dev->bmmio + dev->intfdesc.BARLocation,
872                 sizeof(struct tmComResBusDescr));
873
874         if (dev->hwdesc.bLength != sizeof(struct tmComResHWDescr)) {
875                 printk(KERN_ERR "Structure struct tmComResHWDescr is mangled\n");
876                 printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength,
877                         (u32)sizeof(struct tmComResHWDescr));
878         } else
879                 saa7164_dump_hwdesc(dev);
880
881         if (dev->intfdesc.bLength != sizeof(struct tmComResInterfaceDescr)) {
882                 printk(KERN_ERR "struct struct tmComResInterfaceDescr is mangled\n");
883                 printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength,
884                         (u32)sizeof(struct tmComResInterfaceDescr));
885         } else
886                 saa7164_dump_intfdesc(dev);
887
888         saa7164_dump_busdesc(dev);
889 }
890
891 static int saa7164_pci_quirks(struct saa7164_dev *dev)
892 {
893         return 0;
894 }
895
896 static int get_resources(struct saa7164_dev *dev)
897 {
898         if (request_mem_region(pci_resource_start(dev->pci, 0),
899                 pci_resource_len(dev->pci, 0), dev->name)) {
900
901                 if (request_mem_region(pci_resource_start(dev->pci, 2),
902                         pci_resource_len(dev->pci, 2), dev->name))
903                         return 0;
904         }
905
906         printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n",
907                 dev->name,
908                 (u64)pci_resource_start(dev->pci, 0),
909                 (u64)pci_resource_start(dev->pci, 2));
910
911         return -EBUSY;
912 }
913
914 static int saa7164_port_init(struct saa7164_dev *dev, int portnr)
915 {
916         struct saa7164_port *port = NULL;
917
918         if ((portnr < 0) || (portnr >= SAA7164_MAX_PORTS))
919                 BUG();
920
921         port = &dev->ports[portnr];
922
923         port->dev = dev;
924         port->nr = portnr;
925
926         if ((portnr == SAA7164_PORT_TS1) || (portnr == SAA7164_PORT_TS2))
927                 port->type = SAA7164_MPEG_DVB;
928         else
929         if ((portnr == SAA7164_PORT_ENC1) || (portnr == SAA7164_PORT_ENC2)) {
930                 port->type = SAA7164_MPEG_ENCODER;
931
932                 /* We need a deferred interrupt handler for cmd handling */
933                 INIT_WORK(&port->workenc, saa7164_work_enchandler);
934         } else if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
935                 port->type = SAA7164_MPEG_VBI;
936
937                 /* We need a deferred interrupt handler for cmd handling */
938                 INIT_WORK(&port->workenc, saa7164_work_vbihandler);
939         } else
940                 BUG();
941
942         /* Init all the critical resources */
943         mutex_init(&port->dvb.lock);
944         INIT_LIST_HEAD(&port->dmaqueue.list);
945         mutex_init(&port->dmaqueue_lock);
946
947         INIT_LIST_HEAD(&port->list_buf_used.list);
948         INIT_LIST_HEAD(&port->list_buf_free.list);
949         init_waitqueue_head(&port->wait_read);
950
951
952         saa7164_histogram_reset(&port->irq_interval, "irq intervals");
953         saa7164_histogram_reset(&port->svc_interval, "deferred intervals");
954         saa7164_histogram_reset(&port->irq_svc_interval,
955                 "irq to deferred intervals");
956         saa7164_histogram_reset(&port->read_interval,
957                 "encoder/vbi read() intervals");
958         saa7164_histogram_reset(&port->poll_interval,
959                 "encoder/vbi poll() intervals");
960
961         return 0;
962 }
963
964 static int saa7164_dev_setup(struct saa7164_dev *dev)
965 {
966         int i;
967
968         mutex_init(&dev->lock);
969         atomic_inc(&dev->refcount);
970         dev->nr = saa7164_devcount++;
971
972         snprintf(dev->name, sizeof(dev->name), "saa7164[%d]", dev->nr);
973
974         mutex_lock(&devlist);
975         list_add_tail(&dev->devlist, &saa7164_devlist);
976         mutex_unlock(&devlist);
977
978         /* board config */
979         dev->board = UNSET;
980         if (card[dev->nr] < saa7164_bcount)
981                 dev->board = card[dev->nr];
982
983         for (i = 0; UNSET == dev->board  &&  i < saa7164_idcount; i++)
984                 if (dev->pci->subsystem_vendor == saa7164_subids[i].subvendor &&
985                         dev->pci->subsystem_device ==
986                                 saa7164_subids[i].subdevice)
987                                 dev->board = saa7164_subids[i].card;
988
989         if (UNSET == dev->board) {
990                 dev->board = SAA7164_BOARD_UNKNOWN;
991                 saa7164_card_list(dev);
992         }
993
994         dev->pci_bus  = dev->pci->bus->number;
995         dev->pci_slot = PCI_SLOT(dev->pci->devfn);
996
997         /* I2C Defaults / setup */
998         dev->i2c_bus[0].dev = dev;
999         dev->i2c_bus[0].nr = 0;
1000         dev->i2c_bus[1].dev = dev;
1001         dev->i2c_bus[1].nr = 1;
1002         dev->i2c_bus[2].dev = dev;
1003         dev->i2c_bus[2].nr = 2;
1004
1005         /* Transport + Encoder ports 1, 2, 3, 4 - Defaults / setup */
1006         saa7164_port_init(dev, SAA7164_PORT_TS1);
1007         saa7164_port_init(dev, SAA7164_PORT_TS2);
1008         saa7164_port_init(dev, SAA7164_PORT_ENC1);
1009         saa7164_port_init(dev, SAA7164_PORT_ENC2);
1010         saa7164_port_init(dev, SAA7164_PORT_VBI1);
1011         saa7164_port_init(dev, SAA7164_PORT_VBI2);
1012
1013         if (get_resources(dev) < 0) {
1014                 printk(KERN_ERR "CORE %s No more PCIe resources for "
1015                        "subsystem: %04x:%04x\n",
1016                        dev->name, dev->pci->subsystem_vendor,
1017                        dev->pci->subsystem_device);
1018
1019                 saa7164_devcount--;
1020                 return -ENODEV;
1021         }
1022
1023         /* PCI/e allocations */
1024         dev->lmmio = ioremap(pci_resource_start(dev->pci, 0),
1025                              pci_resource_len(dev->pci, 0));
1026
1027         dev->lmmio2 = ioremap(pci_resource_start(dev->pci, 2),
1028                              pci_resource_len(dev->pci, 2));
1029
1030         dev->bmmio = (u8 __iomem *)dev->lmmio;
1031         dev->bmmio2 = (u8 __iomem *)dev->lmmio2;
1032
1033         /* Inerrupt and ack register locations offset of bmmio */
1034         dev->int_status = 0x183000 + 0xf80;
1035         dev->int_ack = 0x183000 + 0xf90;
1036
1037         printk(KERN_INFO
1038                 "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
1039                dev->name, dev->pci->subsystem_vendor,
1040                dev->pci->subsystem_device, saa7164_boards[dev->board].name,
1041                dev->board, card[dev->nr] == dev->board ?
1042                "insmod option" : "autodetected");
1043
1044         saa7164_pci_quirks(dev);
1045
1046         return 0;
1047 }
1048
1049 static void saa7164_dev_unregister(struct saa7164_dev *dev)
1050 {
1051         dprintk(1, "%s()\n", __func__);
1052
1053         release_mem_region(pci_resource_start(dev->pci, 0),
1054                 pci_resource_len(dev->pci, 0));
1055
1056         release_mem_region(pci_resource_start(dev->pci, 2),
1057                 pci_resource_len(dev->pci, 2));
1058
1059         if (!atomic_dec_and_test(&dev->refcount))
1060                 return;
1061
1062         iounmap(dev->lmmio);
1063         iounmap(dev->lmmio2);
1064
1065         return;
1066 }
1067
1068 #ifdef CONFIG_PROC_FS
1069 static int saa7164_proc_show(struct seq_file *m, void *v)
1070 {
1071         struct saa7164_dev *dev;
1072         struct tmComResBusInfo *b;
1073         struct list_head *list;
1074         int i, c;
1075
1076         if (saa7164_devcount == 0)
1077                 return 0;
1078
1079         list_for_each(list, &saa7164_devlist) {
1080                 dev = list_entry(list, struct saa7164_dev, devlist);
1081                 seq_printf(m, "%s = %p\n", dev->name, dev);
1082
1083                 /* Lock the bus from any other access */
1084                 b = &dev->bus;
1085                 mutex_lock(&b->lock);
1086
1087                 seq_printf(m, " .m_pdwSetWritePos = 0x%x (0x%08x)\n",
1088                         b->m_dwSetReadPos, saa7164_readl(b->m_dwSetReadPos));
1089
1090                 seq_printf(m, " .m_pdwSetReadPos  = 0x%x (0x%08x)\n",
1091                         b->m_dwSetWritePos, saa7164_readl(b->m_dwSetWritePos));
1092
1093                 seq_printf(m, " .m_pdwGetWritePos = 0x%x (0x%08x)\n",
1094                         b->m_dwGetReadPos, saa7164_readl(b->m_dwGetReadPos));
1095
1096                 seq_printf(m, " .m_pdwGetReadPos  = 0x%x (0x%08x)\n",
1097                         b->m_dwGetWritePos, saa7164_readl(b->m_dwGetWritePos));
1098                 c = 0;
1099                 seq_printf(m, "\n  Set Ring:\n");
1100                 seq_printf(m, "\n addr  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
1101                 for (i = 0; i < b->m_dwSizeSetRing; i++) {
1102                         if (c == 0)
1103                                 seq_printf(m, " %04x:", i);
1104
1105                         seq_printf(m, " %02x", readb(b->m_pdwSetRing + i));
1106
1107                         if (++c == 16) {
1108                                 seq_printf(m, "\n");
1109                                 c = 0;
1110                         }
1111                 }
1112
1113                 c = 0;
1114                 seq_printf(m, "\n  Get Ring:\n");
1115                 seq_printf(m, "\n addr  00 01 02 03 04 05 06 07 08 09 0a 0b 0c 0d 0e 0f\n");
1116                 for (i = 0; i < b->m_dwSizeGetRing; i++) {
1117                         if (c == 0)
1118                                 seq_printf(m, " %04x:", i);
1119
1120                         seq_printf(m, " %02x", readb(b->m_pdwGetRing + i));
1121
1122                         if (++c == 16) {
1123                                 seq_printf(m, "\n");
1124                                 c = 0;
1125                         }
1126                 }
1127
1128                 mutex_unlock(&b->lock);
1129
1130         }
1131
1132         return 0;
1133 }
1134
1135 static int saa7164_proc_open(struct inode *inode, struct file *filp)
1136 {
1137         return single_open(filp, saa7164_proc_show, NULL);
1138 }
1139
1140 static const struct file_operations saa7164_proc_fops = {
1141         .open           = saa7164_proc_open,
1142         .read           = seq_read,
1143         .llseek         = seq_lseek,
1144         .release        = single_release,
1145 };
1146
1147 static int saa7164_proc_create(void)
1148 {
1149         struct proc_dir_entry *pe;
1150
1151         pe = proc_create("saa7164", S_IRUGO, NULL, &saa7164_proc_fops);
1152         if (!pe)
1153                 return -ENOMEM;
1154
1155         return 0;
1156 }
1157 #endif
1158
1159 static int saa7164_thread_function(void *data)
1160 {
1161         struct saa7164_dev *dev = data;
1162         struct tmFwInfoStruct fwinfo;
1163         u64 last_poll_time = 0;
1164
1165         dprintk(DBGLVL_THR, "thread started\n");
1166
1167         set_freezable();
1168
1169         while (1) {
1170                 msleep_interruptible(100);
1171                 if (kthread_should_stop())
1172                         break;
1173                 try_to_freeze();
1174
1175                 dprintk(DBGLVL_THR, "thread running\n");
1176
1177                 /* Dump the firmware debug message to console */
1178                 /* Polling this costs us 1-2% of the arm CPU */
1179                 /* convert this into a respnde to interrupt 0x7a */
1180                 saa7164_api_collect_debug(dev);
1181
1182                 /* Monitor CPU load every 1 second */
1183                 if ((last_poll_time + 1000 /* ms */) < jiffies_to_msecs(jiffies)) {
1184                         saa7164_api_get_load_info(dev, &fwinfo);
1185                         last_poll_time = jiffies_to_msecs(jiffies);
1186                 }
1187
1188         }
1189
1190         dprintk(DBGLVL_THR, "thread exiting\n");
1191         return 0;
1192 }
1193
1194 static bool saa7164_enable_msi(struct pci_dev *pci_dev, struct saa7164_dev *dev)
1195 {
1196         int err;
1197
1198         if (!enable_msi) {
1199                 printk(KERN_WARNING "%s() MSI disabled by module parameter 'enable_msi'"
1200                        , __func__);
1201                 return false;
1202         }
1203
1204         err = pci_enable_msi(pci_dev);
1205
1206         if (err) {
1207                 printk(KERN_ERR "%s() Failed to enable MSI interrupt."
1208                         " Falling back to a shared IRQ\n", __func__);
1209                 return false;
1210         }
1211
1212         /* no error - so request an msi interrupt */
1213         err = request_irq(pci_dev->irq, saa7164_irq, 0,
1214                                                 dev->name, dev);
1215
1216         if (err) {
1217                 /* fall back to legacy interrupt */
1218                 printk(KERN_ERR "%s() Failed to get an MSI interrupt."
1219                        " Falling back to a shared IRQ\n", __func__);
1220                 pci_disable_msi(pci_dev);
1221                 return false;
1222         }
1223
1224         return true;
1225 }
1226
1227 static int saa7164_initdev(struct pci_dev *pci_dev,
1228                            const struct pci_device_id *pci_id)
1229 {
1230         struct saa7164_dev *dev;
1231         int err, i;
1232         u32 version;
1233
1234         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
1235         if (NULL == dev)
1236                 return -ENOMEM;
1237
1238         err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
1239         if (err < 0) {
1240                 dev_err(&pci_dev->dev, "v4l2_device_register failed\n");
1241                 goto fail_free;
1242         }
1243
1244         /* pci init */
1245         dev->pci = pci_dev;
1246         if (pci_enable_device(pci_dev)) {
1247                 err = -EIO;
1248                 goto fail_free;
1249         }
1250
1251         if (saa7164_dev_setup(dev) < 0) {
1252                 err = -EINVAL;
1253                 goto fail_free;
1254         }
1255
1256         /* print pci info */
1257         dev->pci_rev = pci_dev->revision;
1258         pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
1259         printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
1260                "latency: %d, mmio: 0x%llx\n", dev->name,
1261                pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
1262                dev->pci_lat,
1263                 (unsigned long long)pci_resource_start(pci_dev, 0));
1264
1265         pci_set_master(pci_dev);
1266         /* TODO */
1267         if (!pci_set_dma_mask(pci_dev, 0xffffffff)) {
1268                 printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
1269                 err = -EIO;
1270                 goto fail_irq;
1271         }
1272
1273         /* irq bit */
1274         if (saa7164_enable_msi(pci_dev, dev)) {
1275                 dev->msi = true;
1276         } else {
1277                 /* if we have an error (i.e. we don't have an interrupt)
1278                          or msi is not enabled - fallback to shared interrupt */
1279
1280                 err = request_irq(pci_dev->irq, saa7164_irq,
1281                                 IRQF_SHARED, dev->name, dev);
1282
1283                 if (err < 0) {
1284                         printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name,
1285                                pci_dev->irq);
1286                         err = -EIO;
1287                         goto fail_irq;
1288                 }
1289         }
1290
1291         pci_set_drvdata(pci_dev, dev);
1292
1293         /* Init the internal command list */
1294         for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) {
1295                 dev->cmds[i].seqno = i;
1296                 dev->cmds[i].inuse = 0;
1297                 mutex_init(&dev->cmds[i].lock);
1298                 init_waitqueue_head(&dev->cmds[i].wait);
1299         }
1300
1301         /* We need a deferred interrupt handler for cmd handling */
1302         INIT_WORK(&dev->workcmd, saa7164_work_cmdhandler);
1303
1304         /* Only load the firmware if we know the board */
1305         if (dev->board != SAA7164_BOARD_UNKNOWN) {
1306
1307                 err = saa7164_downloadfirmware(dev);
1308                 if (err < 0) {
1309                         printk(KERN_ERR
1310                                 "Failed to boot firmware, no features "
1311                                 "registered\n");
1312                         goto fail_fw;
1313                 }
1314
1315                 saa7164_get_descriptors(dev);
1316                 saa7164_dumpregs(dev, 0);
1317                 saa7164_getcurrentfirmwareversion(dev);
1318                 saa7164_getfirmwarestatus(dev);
1319                 err = saa7164_bus_setup(dev);
1320                 if (err < 0)
1321                         printk(KERN_ERR
1322                                 "Failed to setup the bus, will continue\n");
1323                 saa7164_bus_dump(dev);
1324
1325                 /* Ping the running firmware via the command bus and get the
1326                  * firmware version, this checks the bus is running OK.
1327                  */
1328                 version = 0;
1329                 if (saa7164_api_get_fw_version(dev, &version) == SAA_OK)
1330                         dprintk(1, "Bus is operating correctly using "
1331                                 "version %d.%d.%d.%d (0x%x)\n",
1332                                 (version & 0x0000fc00) >> 10,
1333                                 (version & 0x000003e0) >> 5,
1334                                 (version & 0x0000001f),
1335                                 (version & 0xffff0000) >> 16,
1336                                 version);
1337                 else
1338                         printk(KERN_ERR
1339                                 "Failed to communicate with the firmware\n");
1340
1341                 /* Bring up the I2C buses */
1342                 saa7164_i2c_register(&dev->i2c_bus[0]);
1343                 saa7164_i2c_register(&dev->i2c_bus[1]);
1344                 saa7164_i2c_register(&dev->i2c_bus[2]);
1345                 saa7164_gpio_setup(dev);
1346                 saa7164_card_setup(dev);
1347
1348                 /* Parse the dynamic device configuration, find various
1349                  * media endpoints (MPEG, WMV, PS, TS) and cache their
1350                  * configuration details into the driver, so we can
1351                  * reference them later during simething_register() func,
1352                  * interrupt handlers, deferred work handlers etc.
1353                  */
1354                 saa7164_api_enum_subdevs(dev);
1355
1356                 /* Begin to create the video sub-systems and register funcs */
1357                 if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB) {
1358                         if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS1]) < 0) {
1359                                 printk(KERN_ERR "%s() Failed to register "
1360                                         "dvb adapters on porta\n",
1361                                         __func__);
1362                         }
1363                 }
1364
1365                 if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB) {
1366                         if (saa7164_dvb_register(&dev->ports[SAA7164_PORT_TS2]) < 0) {
1367                                 printk(KERN_ERR"%s() Failed to register "
1368                                         "dvb adapters on portb\n",
1369                                         __func__);
1370                         }
1371                 }
1372
1373                 if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER) {
1374                         if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC1]) < 0) {
1375                                 printk(KERN_ERR"%s() Failed to register "
1376                                         "mpeg encoder\n", __func__);
1377                         }
1378                 }
1379
1380                 if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER) {
1381                         if (saa7164_encoder_register(&dev->ports[SAA7164_PORT_ENC2]) < 0) {
1382                                 printk(KERN_ERR"%s() Failed to register "
1383                                         "mpeg encoder\n", __func__);
1384                         }
1385                 }
1386
1387                 if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI) {
1388                         if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI1]) < 0) {
1389                                 printk(KERN_ERR"%s() Failed to register "
1390                                         "vbi device\n", __func__);
1391                         }
1392                 }
1393
1394                 if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI) {
1395                         if (saa7164_vbi_register(&dev->ports[SAA7164_PORT_VBI2]) < 0) {
1396                                 printk(KERN_ERR"%s() Failed to register "
1397                                         "vbi device\n", __func__);
1398                         }
1399                 }
1400                 saa7164_api_set_debug(dev, fw_debug);
1401
1402                 if (fw_debug) {
1403                         dev->kthread = kthread_run(saa7164_thread_function, dev,
1404                                 "saa7164 debug");
1405                         if (IS_ERR(dev->kthread)) {
1406                                 dev->kthread = NULL;
1407                                 printk(KERN_ERR "%s() Failed to create "
1408                                         "debug kernel thread\n", __func__);
1409                         }
1410                 }
1411
1412         } /* != BOARD_UNKNOWN */
1413         else
1414                 printk(KERN_ERR "%s() Unsupported board detected, "
1415                         "registering without firmware\n", __func__);
1416
1417         dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
1418         dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
1419
1420 fail_fw:
1421         return 0;
1422
1423 fail_irq:
1424         saa7164_dev_unregister(dev);
1425 fail_free:
1426         v4l2_device_unregister(&dev->v4l2_dev);
1427         kfree(dev);
1428         return err;
1429 }
1430
1431 static void saa7164_shutdown(struct saa7164_dev *dev)
1432 {
1433         dprintk(1, "%s()\n", __func__);
1434 }
1435
1436 static void saa7164_finidev(struct pci_dev *pci_dev)
1437 {
1438         struct saa7164_dev *dev = pci_get_drvdata(pci_dev);
1439
1440         if (dev->board != SAA7164_BOARD_UNKNOWN) {
1441                 if (fw_debug && dev->kthread) {
1442                         kthread_stop(dev->kthread);
1443                         dev->kthread = NULL;
1444                 }
1445                 if (dev->firmwareloaded)
1446                         saa7164_api_set_debug(dev, 0x00);
1447         }
1448
1449         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1450                 &dev->ports[SAA7164_PORT_ENC1].irq_interval);
1451         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1452                 &dev->ports[SAA7164_PORT_ENC1].svc_interval);
1453         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1454                 &dev->ports[SAA7164_PORT_ENC1].irq_svc_interval);
1455         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1456                 &dev->ports[SAA7164_PORT_ENC1].read_interval);
1457         saa7164_histogram_print(&dev->ports[SAA7164_PORT_ENC1],
1458                 &dev->ports[SAA7164_PORT_ENC1].poll_interval);
1459         saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI1],
1460                 &dev->ports[SAA7164_PORT_VBI1].read_interval);
1461         saa7164_histogram_print(&dev->ports[SAA7164_PORT_VBI2],
1462                 &dev->ports[SAA7164_PORT_VBI2].poll_interval);
1463
1464         saa7164_shutdown(dev);
1465
1466         if (saa7164_boards[dev->board].porta == SAA7164_MPEG_DVB)
1467                 saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS1]);
1468
1469         if (saa7164_boards[dev->board].portb == SAA7164_MPEG_DVB)
1470                 saa7164_dvb_unregister(&dev->ports[SAA7164_PORT_TS2]);
1471
1472         if (saa7164_boards[dev->board].portc == SAA7164_MPEG_ENCODER)
1473                 saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC1]);
1474
1475         if (saa7164_boards[dev->board].portd == SAA7164_MPEG_ENCODER)
1476                 saa7164_encoder_unregister(&dev->ports[SAA7164_PORT_ENC2]);
1477
1478         if (saa7164_boards[dev->board].porte == SAA7164_MPEG_VBI)
1479                 saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI1]);
1480
1481         if (saa7164_boards[dev->board].portf == SAA7164_MPEG_VBI)
1482                 saa7164_vbi_unregister(&dev->ports[SAA7164_PORT_VBI2]);
1483
1484         saa7164_i2c_unregister(&dev->i2c_bus[0]);
1485         saa7164_i2c_unregister(&dev->i2c_bus[1]);
1486         saa7164_i2c_unregister(&dev->i2c_bus[2]);
1487
1488         /* unregister stuff */
1489         free_irq(pci_dev->irq, dev);
1490
1491         if (dev->msi) {
1492                 pci_disable_msi(pci_dev);
1493                 dev->msi = false;
1494         }
1495
1496         pci_disable_device(pci_dev);
1497
1498         mutex_lock(&devlist);
1499         list_del(&dev->devlist);
1500         mutex_unlock(&devlist);
1501
1502         saa7164_dev_unregister(dev);
1503         v4l2_device_unregister(&dev->v4l2_dev);
1504         kfree(dev);
1505 }
1506
1507 static struct pci_device_id saa7164_pci_tbl[] = {
1508         {
1509                 /* SAA7164 */
1510                 .vendor       = 0x1131,
1511                 .device       = 0x7164,
1512                 .subvendor    = PCI_ANY_ID,
1513                 .subdevice    = PCI_ANY_ID,
1514         }, {
1515                 /* --- end of list --- */
1516         }
1517 };
1518 MODULE_DEVICE_TABLE(pci, saa7164_pci_tbl);
1519
1520 static struct pci_driver saa7164_pci_driver = {
1521         .name     = "saa7164",
1522         .id_table = saa7164_pci_tbl,
1523         .probe    = saa7164_initdev,
1524         .remove   = saa7164_finidev,
1525         /* TODO */
1526         .suspend  = NULL,
1527         .resume   = NULL,
1528 };
1529
1530 static int __init saa7164_init(void)
1531 {
1532         printk(KERN_INFO "saa7164 driver loaded\n");
1533
1534 #ifdef CONFIG_PROC_FS
1535         saa7164_proc_create();
1536 #endif
1537         return pci_register_driver(&saa7164_pci_driver);
1538 }
1539
1540 static void __exit saa7164_fini(void)
1541 {
1542 #ifdef CONFIG_PROC_FS
1543         remove_proc_entry("saa7164", NULL);
1544 #endif
1545         pci_unregister_driver(&saa7164_pci_driver);
1546 }
1547
1548 module_init(saa7164_init);
1549 module_exit(saa7164_fini);
1550