drivers/scsi/pm8001/pm8001_init.c

   1 /*
   2  * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
   3  *
   4  * Copyright (c) 2008-2009 USI Co., Ltd.
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions, and the following disclaimer,
  12  *    without modification.
  13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14  *    substantially similar to the "NO WARRANTY" disclaimer below
  15  *    ("Disclaimer") and any redistribution must be conditioned upon
  16  *    including a substantially similar Disclaimer requirement for further
  17  *    binary redistribution.
  18  * 3. Neither the names of the above-listed copyright holders nor the names
  19  *    of any contributors may be used to endorse or promote products derived
  20  *    from this software without specific prior written permission.
  21  *
  22  * Alternatively, this software may be distributed under the terms of the
  23  * GNU General Public License ("GPL") version 2 as published by the Free
  24  * Software Foundation.
  25  *
  26  * NO WARRANTY
  27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37  * POSSIBILITY OF SUCH DAMAGES.
  38  *
  39  */
  40
  41 #include <linux/slab.h>
  42 #include "pm8001_sas.h"
  43 #include "pm8001_chips.h"
  44
  45 static struct scsi_transport_template *pm8001_stt;
  46
  47 /**
  48  * chip info structure to identify chip key functionality as
  49  * encryption available/not, no of ports, hw specific function ref
  50  */
  51 static const struct pm8001_chip_info pm8001_chips[] = {
  52         [chip_8001] = {0,  8, &pm8001_8001_dispatch,},
  53         [chip_8008] = {0,  8, &pm8001_80xx_dispatch,},
  54         [chip_8009] = {1,  8, &pm8001_80xx_dispatch,},
  55         [chip_8018] = {0,  16, &pm8001_80xx_dispatch,},
  56         [chip_8019] = {1,  16, &pm8001_80xx_dispatch,},
  57 };
  58 static int pm8001_id;
  59
  60 LIST_HEAD(hba_list);
  61
  62 struct workqueue_struct *pm8001_wq;
  63
  64 /**
  65  * The main structure which LLDD must register for scsi core.
  66  */
  67 static struct scsi_host_template pm8001_sht = {
  68         .module                 = THIS_MODULE,
  69         .name                   = DRV_NAME,
  70         .queuecommand           = sas_queuecommand,
  71         .target_alloc           = sas_target_alloc,
  72         .slave_configure        = sas_slave_configure,
  73         .scan_finished          = pm8001_scan_finished,
  74         .scan_start             = pm8001_scan_start,
  75         .change_queue_depth     = sas_change_queue_depth,
  76         .change_queue_type      = sas_change_queue_type,
  77         .bios_param             = sas_bios_param,
  78         .can_queue              = 1,
  79         .cmd_per_lun            = 1,
  80         .this_id                = -1,
  81         .sg_tablesize           = SG_ALL,
  82         .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
  83         .use_clustering         = ENABLE_CLUSTERING,
  84         .eh_device_reset_handler = sas_eh_device_reset_handler,
  85         .eh_bus_reset_handler   = sas_eh_bus_reset_handler,
  86         .target_destroy         = sas_target_destroy,
  87         .ioctl                  = sas_ioctl,
  88         .shost_attrs            = pm8001_host_attrs,
  89 };
  90
  91 /**
  92  * Sas layer call this function to execute specific task.
  93  */
  94 static struct sas_domain_function_template pm8001_transport_ops = {
  95         .lldd_dev_found         = pm8001_dev_found,
  96         .lldd_dev_gone          = pm8001_dev_gone,
  97
  98         .lldd_execute_task      = pm8001_queue_command,
  99         .lldd_control_phy       = pm8001_phy_control,
 100
 101         .lldd_abort_task        = pm8001_abort_task,
 102         .lldd_abort_task_set    = pm8001_abort_task_set,
 103         .lldd_clear_aca         = pm8001_clear_aca,
 104         .lldd_clear_task_set    = pm8001_clear_task_set,
 105         .lldd_I_T_nexus_reset   = pm8001_I_T_nexus_reset,
 106         .lldd_lu_reset          = pm8001_lu_reset,
 107         .lldd_query_task        = pm8001_query_task,
 108 };
 109
 110 /**
 111  *pm8001_phy_init - initiate our adapter phys
 112  *@pm8001_ha: our hba structure.
 113  *@phy_id: phy id.
 114  */
 115 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 116 {
 117         struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
 118         struct asd_sas_phy *sas_phy = &phy->sas_phy;
 119         phy->phy_state = 0;
 120         phy->pm8001_ha = pm8001_ha;
 121         sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
 122         sas_phy->class = SAS;
 123         sas_phy->iproto = SAS_PROTOCOL_ALL;
 124         sas_phy->tproto = 0;
 125         sas_phy->type = PHY_TYPE_PHYSICAL;
 126         sas_phy->role = PHY_ROLE_INITIATOR;
 127         sas_phy->oob_mode = OOB_NOT_CONNECTED;
 128         sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
 129         sas_phy->id = phy_id;
 130         sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
 131         sas_phy->frame_rcvd = &phy->frame_rcvd[0];
 132         sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
 133         sas_phy->lldd_phy = phy;
 134 }
 135
 136 /**
 137  *pm8001_free - free hba
 138  *@pm8001_ha:   our hba structure.
 139  *
 140  */
 141 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 142 {
 143         int i;
 144
 145         if (!pm8001_ha)
 146                 return;
 147
 148         for (i = 0; i < USI_MAX_MEMCNT; i++) {
 149                 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
 150                         pci_free_consistent(pm8001_ha->pdev,
 151                                 (pm8001_ha->memoryMap.region[i].total_len +
 152                                 pm8001_ha->memoryMap.region[i].alignment),
 153                                 pm8001_ha->memoryMap.region[i].virt_ptr,
 154                                 pm8001_ha->memoryMap.region[i].phys_addr);
 155                         }
 156         }
 157         PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
 158         if (pm8001_ha->shost)
 159                 scsi_host_put(pm8001_ha->shost);
 160         flush_workqueue(pm8001_wq);
 161         kfree(pm8001_ha->tags);
 162         kfree(pm8001_ha);
 163 }
 164
 165 #ifdef PM8001_USE_TASKLET
 166
 167 /**
 168  * tasklet for 64 msi-x interrupt handler
 169  * @opaque: the passed general host adapter struct
 170  * Note: pm8001_tasklet is common for pm8001 & pm80xx
 171  */
 172 static void pm8001_tasklet(unsigned long opaque)
 173 {
 174         struct pm8001_hba_info *pm8001_ha;
 175         u32 vec;
 176         pm8001_ha = (struct pm8001_hba_info *)opaque;
 177         if (unlikely(!pm8001_ha))
 178                 BUG_ON(1);
 179         vec = pm8001_ha->int_vector;
 180         PM8001_CHIP_DISP->isr(pm8001_ha, vec);
 181 }
 182 #endif
 183
 184 static struct  pm8001_hba_info *outq_to_hba(u8 *outq)
 185 {
 186         return container_of((outq - *outq), struct pm8001_hba_info, outq[0]);
 187 }
 188
 189 /**
 190  * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
 191  * It obtains the vector number and calls the equivalent bottom
 192  * half or services directly.
 193  * @opaque: the passed outbound queue/vector. Host structure is
 194  * retrieved from the same.
 195  */
 196 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 197 {
 198         struct pm8001_hba_info *pm8001_ha = outq_to_hba(opaque);
 199         u8 outq = *(u8 *)opaque;
 200         irqreturn_t ret = IRQ_HANDLED;
 201         if (unlikely(!pm8001_ha))
 202                 return IRQ_NONE;
 203         if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 204                 return IRQ_NONE;
 205         pm8001_ha->int_vector = outq;
 206 #ifdef PM8001_USE_TASKLET
 207         tasklet_schedule(&pm8001_ha->tasklet);
 208 #else
 209         ret = PM8001_CHIP_DISP->isr(pm8001_ha, outq);
 210 #endif
 211         return ret;
 212 }
 213
 214 /**
 215  * pm8001_interrupt_handler_intx - main INTx interrupt handler.
 216  * @dev_id: sas_ha structure. The HBA is retrieved from sas_has structure.
 217  */
 218
 219 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 220 {
 221         struct pm8001_hba_info *pm8001_ha;
 222         irqreturn_t ret = IRQ_HANDLED;
 223         struct sas_ha_struct *sha = dev_id;
 224         pm8001_ha = sha->lldd_ha;
 225         if (unlikely(!pm8001_ha))
 226                 return IRQ_NONE;
 227         if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
 228                 return IRQ_NONE;
 229
 230         pm8001_ha->int_vector = 0;
 231 #ifdef PM8001_USE_TASKLET
 232         tasklet_schedule(&pm8001_ha->tasklet);
 233 #else
 234         ret = PM8001_CHIP_DISP->isr(pm8001_ha, 0);
 235 #endif
 236         return ret;
 237 }
 238
 239 /**
 240  * pm8001_alloc - initiate our hba structure and 6 DMAs area.
 241  * @pm8001_ha:our hba structure.
 242  *
 243  */
 244 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 245                         const struct pci_device_id *ent)
 246 {
 247         int i;
 248         spin_lock_init(&pm8001_ha->lock);
 249         PM8001_INIT_DBG(pm8001_ha,
 250                 pm8001_printk("pm8001_alloc: PHY:%x\n",
 251                                 pm8001_ha->chip->n_phy));
 252         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 253                 pm8001_phy_init(pm8001_ha, i);
 254                 pm8001_ha->port[i].wide_port_phymap = 0;
 255                 pm8001_ha->port[i].port_attached = 0;
 256                 pm8001_ha->port[i].port_state = 0;
 257                 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
 258         }
 259
 260         pm8001_ha->tags = kzalloc(PM8001_MAX_CCB, GFP_KERNEL);
 261         if (!pm8001_ha->tags)
 262                 goto err_out;
 263         /* MPI Memory region 1 for AAP Event Log for fw */
 264         pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
 265         pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
 266         pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
 267         pm8001_ha->memoryMap.region[AAP1].alignment = 32;
 268
 269         /* MPI Memory region 2 for IOP Event Log for fw */
 270         pm8001_ha->memoryMap.region[IOP].num_elements = 1;
 271         pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
 272         pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
 273         pm8001_ha->memoryMap.region[IOP].alignment = 32;
 274
 275         for (i = 0; i < PM8001_MAX_SPCV_INB_NUM; i++) {
 276                 /* MPI Memory region 3 for consumer Index of inbound queues */
 277                 pm8001_ha->memoryMap.region[CI+i].num_elements = 1;
 278                 pm8001_ha->memoryMap.region[CI+i].element_size = 4;
 279                 pm8001_ha->memoryMap.region[CI+i].total_len = 4;
 280                 pm8001_ha->memoryMap.region[CI+i].alignment = 4;
 281
 282                 if ((ent->driver_data) != chip_8001) {
 283                         /* MPI Memory region 5 inbound queues */
 284                         pm8001_ha->memoryMap.region[IB+i].num_elements =
 285                                                 PM8001_MPI_QUEUE;
 286                         pm8001_ha->memoryMap.region[IB+i].element_size = 128;
 287                         pm8001_ha->memoryMap.region[IB+i].total_len =
 288                                                 PM8001_MPI_QUEUE * 128;
 289                         pm8001_ha->memoryMap.region[IB+i].alignment = 128;
 290                 } else {
 291                         pm8001_ha->memoryMap.region[IB+i].num_elements =
 292                                                 PM8001_MPI_QUEUE;
 293                         pm8001_ha->memoryMap.region[IB+i].element_size = 64;
 294                         pm8001_ha->memoryMap.region[IB+i].total_len =
 295                                                 PM8001_MPI_QUEUE * 64;
 296                         pm8001_ha->memoryMap.region[IB+i].alignment = 64;
 297                 }
 298         }
 299
 300         for (i = 0; i < PM8001_MAX_SPCV_OUTB_NUM; i++) {
 301                 /* MPI Memory region 4 for producer Index of outbound queues */
 302                 pm8001_ha->memoryMap.region[PI+i].num_elements = 1;
 303                 pm8001_ha->memoryMap.region[PI+i].element_size = 4;
 304                 pm8001_ha->memoryMap.region[PI+i].total_len = 4;
 305                 pm8001_ha->memoryMap.region[PI+i].alignment = 4;
 306
 307                 if (ent->driver_data != chip_8001) {
 308                         /* MPI Memory region 6 Outbound queues */
 309                         pm8001_ha->memoryMap.region[OB+i].num_elements =
 310                                                 PM8001_MPI_QUEUE;
 311                         pm8001_ha->memoryMap.region[OB+i].element_size = 128;
 312                         pm8001_ha->memoryMap.region[OB+i].total_len =
 313                                                 PM8001_MPI_QUEUE * 128;
 314                         pm8001_ha->memoryMap.region[OB+i].alignment = 128;
 315                 } else {
 316                         /* MPI Memory region 6 Outbound queues */
 317                         pm8001_ha->memoryMap.region[OB+i].num_elements =
 318                                                 PM8001_MPI_QUEUE;
 319                         pm8001_ha->memoryMap.region[OB+i].element_size = 64;
 320                         pm8001_ha->memoryMap.region[OB+i].total_len =
 321                                                 PM8001_MPI_QUEUE * 64;
 322                         pm8001_ha->memoryMap.region[OB+i].alignment = 64;
 323                 }
 324
 325         }
 326         /* Memory region write DMA*/
 327         pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
 328         pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
 329         pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
 330         /* Memory region for devices*/
 331         pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
 332         pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
 333                 sizeof(struct pm8001_device);
 334         pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
 335                 sizeof(struct pm8001_device);
 336
 337         /* Memory region for ccb_info*/
 338         pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
 339         pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
 340                 sizeof(struct pm8001_ccb_info);
 341         pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
 342                 sizeof(struct pm8001_ccb_info);
 343
 344         /* Memory region for fw flash */
 345         pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
 346
 347         for (i = 0; i < USI_MAX_MEMCNT; i++) {
 348                 if (pm8001_mem_alloc(pm8001_ha->pdev,
 349                         &pm8001_ha->memoryMap.region[i].virt_ptr,
 350                         &pm8001_ha->memoryMap.region[i].phys_addr,
 351                         &pm8001_ha->memoryMap.region[i].phys_addr_hi,
 352                         &pm8001_ha->memoryMap.region[i].phys_addr_lo,
 353                         pm8001_ha->memoryMap.region[i].total_len,
 354                         pm8001_ha->memoryMap.region[i].alignment) != 0) {
 355                                 PM8001_FAIL_DBG(pm8001_ha,
 356                                         pm8001_printk("Mem%d alloc failed\n",
 357                                         i));
 358                                 goto err_out;
 359                 }
 360         }
 361
 362         pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
 363         for (i = 0; i < PM8001_MAX_DEVICES; i++) {
 364                 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 365                 pm8001_ha->devices[i].id = i;
 366                 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
 367                 pm8001_ha->devices[i].running_req = 0;
 368         }
 369         pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
 370         for (i = 0; i < PM8001_MAX_CCB; i++) {
 371                 pm8001_ha->ccb_info[i].ccb_dma_handle =
 372                         pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
 373                         i * sizeof(struct pm8001_ccb_info);
 374                 pm8001_ha->ccb_info[i].task = NULL;
 375                 pm8001_ha->ccb_info[i].ccb_tag = 0xffffffff;
 376                 pm8001_ha->ccb_info[i].device = NULL;
 377                 ++pm8001_ha->tags_num;
 378         }
 379         pm8001_ha->flags = PM8001F_INIT_TIME;
 380         /* Initialize tags */
 381         pm8001_tag_init(pm8001_ha);
 382         return 0;
 383 err_out:
 384         return 1;
 385 }
 386
 387 /**
 388  * pm8001_ioremap - remap the pci high physical address to kernal virtual
 389  * address so that we can access them.
 390  * @pm8001_ha:our hba structure.
 391  */
 392 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
 393 {
 394         u32 bar;
 395         u32 logicalBar = 0;
 396         struct pci_dev *pdev;
 397
 398         pdev = pm8001_ha->pdev;
 399         /* map pci mem (PMC pci base 0-3)*/
 400         for (bar = 0; bar < 6; bar++) {
 401                 /*
 402                 ** logical BARs for SPC:
 403                 ** bar 0 and 1 - logical BAR0
 404                 ** bar 2 and 3 - logical BAR1
 405                 ** bar4 - logical BAR2
 406                 ** bar5 - logical BAR3
 407                 ** Skip the appropriate assignments:
 408                 */
 409                 if ((bar == 1) || (bar == 3))
 410                         continue;
 411                 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
 412                         pm8001_ha->io_mem[logicalBar].membase =
 413                                 pci_resource_start(pdev, bar);
 414                         pm8001_ha->io_mem[logicalBar].membase &=
 415                                 (u32)PCI_BASE_ADDRESS_MEM_MASK;
 416                         pm8001_ha->io_mem[logicalBar].memsize =
 417                                 pci_resource_len(pdev, bar);
 418                         pm8001_ha->io_mem[logicalBar].memvirtaddr =
 419                                 ioremap(pm8001_ha->io_mem[logicalBar].membase,
 420                                 pm8001_ha->io_mem[logicalBar].memsize);
 421                         PM8001_INIT_DBG(pm8001_ha,
 422                                 pm8001_printk("PCI: bar %d, logicalBar %d ",
 423                                 bar, logicalBar));
 424                         PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
 425                                 "base addr %llx virt_addr=%llx len=%d\n",
 426                                 (u64)pm8001_ha->io_mem[logicalBar].membase,
 427                                 (u64)(unsigned long)
 428                                 pm8001_ha->io_mem[logicalBar].memvirtaddr,
 429                                 pm8001_ha->io_mem[logicalBar].memsize));
 430                 } else {
 431                         pm8001_ha->io_mem[logicalBar].membase   = 0;
 432                         pm8001_ha->io_mem[logicalBar].memsize   = 0;
 433                         pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
 434                 }
 435                 logicalBar++;
 436         }
 437         return 0;
 438 }
 439
 440 /**
 441  * pm8001_pci_alloc - initialize our ha card structure
 442  * @pdev: pci device.
 443  * @ent: ent
 444  * @shost: scsi host struct which has been initialized before.
 445  */
 446 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 447                                  const struct pci_device_id *ent,
 448                                 struct Scsi_Host *shost)
 449
 450 {
 451         struct pm8001_hba_info *pm8001_ha;
 452         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 453
 454
 455         pm8001_ha = sha->lldd_ha;
 456         if (!pm8001_ha)
 457                 return NULL;
 458
 459         pm8001_ha->pdev = pdev;
 460         pm8001_ha->dev = &pdev->dev;
 461         pm8001_ha->chip_id = ent->driver_data;
 462         pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
 463         pm8001_ha->irq = pdev->irq;
 464         pm8001_ha->sas = sha;
 465         pm8001_ha->shost = shost;
 466         pm8001_ha->id = pm8001_id++;
 467         pm8001_ha->logging_level = 0x01;
 468         sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
 469         /* IOMB size is 128 for 8088/89 controllers */
 470         if (pm8001_ha->chip_id != chip_8001)
 471                 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
 472         else
 473                 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
 474
 475 #ifdef PM8001_USE_TASKLET
 476         /**
 477         * default tasklet for non msi-x interrupt handler/first msi-x
 478         * interrupt handler
 479         **/
 480         tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
 481                         (unsigned long)pm8001_ha);
 482 #endif
 483         pm8001_ioremap(pm8001_ha);
 484         if (!pm8001_alloc(pm8001_ha, ent))
 485                 return pm8001_ha;
 486         pm8001_free(pm8001_ha);
 487         return NULL;
 488 }
 489
 490 /**
 491  * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
 492  * @pdev: pci device.
 493  */
 494 static int pci_go_44(struct pci_dev *pdev)
 495 {
 496         int rc;
 497
 498         if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
 499                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
 500                 if (rc) {
 501                         rc = pci_set_consistent_dma_mask(pdev,
 502                                 DMA_BIT_MASK(32));
 503                         if (rc) {
 504                                 dev_printk(KERN_ERR, &pdev->dev,
 505                                         "44-bit DMA enable failed\n");
 506                                 return rc;
 507                         }
 508                 }
 509         } else {
 510                 rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
 511                 if (rc) {
 512                         dev_printk(KERN_ERR, &pdev->dev,
 513                                 "32-bit DMA enable failed\n");
 514                         return rc;
 515                 }
 516                 rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
 517                 if (rc) {
 518                         dev_printk(KERN_ERR, &pdev->dev,
 519                                 "32-bit consistent DMA enable failed\n");
 520                         return rc;
 521                 }
 522         }
 523         return rc;
 524 }
 525
 526 /**
 527  * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
 528  * @shost: scsi host which has been allocated outside.
 529  * @chip_info: our ha struct.
 530  */
 531 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
 532                                    const struct pm8001_chip_info *chip_info)
 533 {
 534         int phy_nr, port_nr;
 535         struct asd_sas_phy **arr_phy;
 536         struct asd_sas_port **arr_port;
 537         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 538
 539         phy_nr = chip_info->n_phy;
 540         port_nr = phy_nr;
 541         memset(sha, 0x00, sizeof(*sha));
 542         arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
 543         if (!arr_phy)
 544                 goto exit;
 545         arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
 546         if (!arr_port)
 547                 goto exit_free2;
 548
 549         sha->sas_phy = arr_phy;
 550         sha->sas_port = arr_port;
 551         sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
 552         if (!sha->lldd_ha)
 553                 goto exit_free1;
 554
 555         shost->transportt = pm8001_stt;
 556         shost->max_id = PM8001_MAX_DEVICES;
 557         shost->max_lun = 8;
 558         shost->max_channel = 0;
 559         shost->unique_id = pm8001_id;
 560         shost->max_cmd_len = 16;
 561         shost->can_queue = PM8001_CAN_QUEUE;
 562         shost->cmd_per_lun = 32;
 563         return 0;
 564 exit_free1:
 565         kfree(arr_port);
 566 exit_free2:
 567         kfree(arr_phy);
 568 exit:
 569         return -1;
 570 }
 571
 572 /**
 573  * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
 574  * @shost: scsi host which has been allocated outside
 575  * @chip_info: our ha struct.
 576  */
 577 static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
 578                                      const struct pm8001_chip_info *chip_info)
 579 {
 580         int i = 0;
 581         struct pm8001_hba_info *pm8001_ha;
 582         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 583
 584         pm8001_ha = sha->lldd_ha;
 585         for (i = 0; i < chip_info->n_phy; i++) {
 586                 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
 587                 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
 588         }
 589         sha->sas_ha_name = DRV_NAME;
 590         sha->dev = pm8001_ha->dev;
 591
 592         sha->lldd_module = THIS_MODULE;
 593         sha->sas_addr = &pm8001_ha->sas_addr[0];
 594         sha->num_phys = chip_info->n_phy;
 595         sha->lldd_max_execute_num = 1;
 596         sha->lldd_queue_size = PM8001_CAN_QUEUE;
 597         sha->core.shost = shost;
 598 }
 599
 600 /**
 601  * pm8001_init_sas_add - initialize sas address
 602  * @chip_info: our ha struct.
 603  *
 604  * Currently we just set the fixed SAS address to our HBA,for manufacture,
 605  * it should read from the EEPROM
 606  */
 607 static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 608 {
 609         u8 i, j;
 610 #ifdef PM8001_READ_VPD
 611         /* For new SPC controllers WWN is stored in flash vpd
 612         *  For SPC/SPCve controllers WWN is stored in EEPROM
 613         *  For Older SPC WWN is stored in NVMD
 614         */
 615         DECLARE_COMPLETION_ONSTACK(completion);
 616         struct pm8001_ioctl_payload payload;
 617         u16 deviceid;
 618         pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
 619         pm8001_ha->nvmd_completion = &completion;
 620
 621         if (pm8001_ha->chip_id == chip_8001) {
 622                 if (deviceid == 0x8081) {
 623                         payload.minor_function = 4;
 624                         payload.length = 4096;
 625                 } else {
 626                         payload.minor_function = 0;
 627                         payload.length = 128;
 628                 }
 629         } else {
 630                 payload.minor_function = 1;
 631                 payload.length = 4096;
 632         }
 633         payload.offset = 0;
 634         payload.func_specific = kzalloc(payload.length, GFP_KERNEL);
 635         PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 636         wait_for_completion(&completion);
 637
 638         for (i = 0, j = 0; i <= 7; i++, j++) {
 639                 if (pm8001_ha->chip_id == chip_8001) {
 640                         if (deviceid == 0x8081)
 641                                 pm8001_ha->sas_addr[j] =
 642                                         payload.func_specific[0x704 + i];
 643                 } else
 644                         pm8001_ha->sas_addr[j] =
 645                                         payload.func_specific[0x804 + i];
 646         }
 647
 648         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 649                 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
 650                         pm8001_ha->sas_addr, SAS_ADDR_SIZE);
 651                 PM8001_INIT_DBG(pm8001_ha,
 652                         pm8001_printk("phy %d sas_addr = %016llx\n", i,
 653                         pm8001_ha->phy[i].dev_sas_addr));
 654         }
 655 #else
 656         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 657                 pm8001_ha->phy[i].dev_sas_addr = 0x50010c600047f9d0ULL;
 658                 pm8001_ha->phy[i].dev_sas_addr =
 659                         cpu_to_be64((u64)
 660                                 (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
 661         }
 662         memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
 663                 SAS_ADDR_SIZE);
 664 #endif
 665 }
 666
 667 #ifdef PM8001_USE_MSIX
 668 /**
 669  * pm8001_setup_msix - enable MSI-X interrupt
 670  * @chip_info: our ha struct.
 671  * @irq_handler: irq_handler
 672  */
 673 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 674 {
 675         u32 i = 0, j = 0;
 676         u32 number_of_intr;
 677         int flag = 0;
 678         u32 max_entry;
 679         int rc;
 680         static char intr_drvname[PM8001_MAX_MSIX_VEC][sizeof(DRV_NAME)+3];
 681
 682         /* SPCv controllers supports 64 msi-x */
 683         if (pm8001_ha->chip_id == chip_8001) {
 684                 number_of_intr = 1;
 685                 flag |= IRQF_DISABLED;
 686         } else {
 687                 number_of_intr = PM8001_MAX_MSIX_VEC;
 688                 flag &= ~IRQF_SHARED;
 689                 flag |= IRQF_DISABLED;
 690         }
 691
 692         max_entry = sizeof(pm8001_ha->msix_entries) /
 693                 sizeof(pm8001_ha->msix_entries[0]);
 694         for (i = 0; i < max_entry ; i++)
 695                 pm8001_ha->msix_entries[i].entry = i;
 696         rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
 697                 number_of_intr);
 698         pm8001_ha->number_of_intr = number_of_intr;
 699         if (!rc) {
 700                 PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
 701                         "pci_enable_msix request ret:%d no of intr %d\n",
 702                                         rc, pm8001_ha->number_of_intr));
 703
 704                 for (i = 0; i < number_of_intr; i++)
 705                         pm8001_ha->outq[i] = i;
 706
 707                 for (i = 0; i < number_of_intr; i++) {
 708                         snprintf(intr_drvname[i], sizeof(intr_drvname[0]),
 709                                         DRV_NAME"%d", i);
 710                         if (request_irq(pm8001_ha->msix_entries[i].vector,
 711                                 pm8001_interrupt_handler_msix, flag,
 712                                 intr_drvname[i], &pm8001_ha->outq[i])) {
 713                                 for (j = 0; j < i; j++)
 714                                         free_irq(
 715                                         pm8001_ha->msix_entries[j].vector,
 716                                         &pm8001_ha->outq[j]);
 717                                 pci_disable_msix(pm8001_ha->pdev);
 718                                 break;
 719                         }
 720                 }
 721         }
 722         return rc;
 723 }
 724 #endif
 725
 726 /**
 727  * pm8001_request_irq - register interrupt
 728  * @chip_info: our ha struct.
 729  */
 730 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 731 {
 732         struct pci_dev *pdev;
 733         int rc;
 734
 735         pdev = pm8001_ha->pdev;
 736
 737 #ifdef PM8001_USE_MSIX
 738         if (pdev->msix_cap)
 739                 return pm8001_setup_msix(pm8001_ha);
 740         else {
 741                 PM8001_INIT_DBG(pm8001_ha,
 742                         pm8001_printk("MSIX not supported!!!\n"));
 743                 goto intx;
 744         }
 745 #endif
 746
 747 intx:
 748         /* initialize the INT-X interrupt */
 749         rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
 750                 DRV_NAME, SHOST_TO_SAS_HA(pm8001_ha->shost));
 751         return rc;
 752 }
 753
 754 /**
 755  * pm8001_pci_probe - probe supported device
 756  * @pdev: pci device which kernel has been prepared for.
 757  * @ent: pci device id
 758  *
 759  * This function is the main initialization function, when register a new
 760  * pci driver it is invoked, all struct an hardware initilization should be done
 761  * here, also, register interrupt
 762  */
 763 static int pm8001_pci_probe(struct pci_dev *pdev,
 764                             const struct pci_device_id *ent)
 765 {
 766         unsigned int rc;
 767         u32     pci_reg;
 768         u8      i = 0;
 769         struct pm8001_hba_info *pm8001_ha;
 770         struct Scsi_Host *shost = NULL;
 771         const struct pm8001_chip_info *chip;
 772
 773         dev_printk(KERN_INFO, &pdev->dev,
 774                 "pm80xx: driver version %s\n", DRV_VERSION);
 775         rc = pci_enable_device(pdev);
 776         if (rc)
 777                 goto err_out_enable;
 778         pci_set_master(pdev);
 779         /*
 780          * Enable pci slot busmaster by setting pci command register.
 781          * This is required by FW for Cyclone card.
 782          */
 783
 784         pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
 785         pci_reg |= 0x157;
 786         pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
 787         rc = pci_request_regions(pdev, DRV_NAME);
 788         if (rc)
 789                 goto err_out_disable;
 790         rc = pci_go_44(pdev);
 791         if (rc)
 792                 goto err_out_regions;
 793
 794         shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
 795         if (!shost) {
 796                 rc = -ENOMEM;
 797                 goto err_out_regions;
 798         }
 799         chip = &pm8001_chips[ent->driver_data];
 800         SHOST_TO_SAS_HA(shost) =
 801                 kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
 802         if (!SHOST_TO_SAS_HA(shost)) {
 803                 rc = -ENOMEM;
 804                 goto err_out_free_host;
 805         }
 806
 807         rc = pm8001_prep_sas_ha_init(shost, chip);
 808         if (rc) {
 809                 rc = -ENOMEM;
 810                 goto err_out_free;
 811         }
 812         pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
 813         /* ent->driver variable is used to differentiate between controllers */
 814         pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
 815         if (!pm8001_ha) {
 816                 rc = -ENOMEM;
 817                 goto err_out_free;
 818         }
 819         list_add_tail(&pm8001_ha->list, &hba_list);
 820         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 821         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
 822         if (rc) {
 823                 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
 824                         "chip_init failed [ret: %d]\n", rc));
 825                 goto err_out_ha_free;
 826         }
 827
 828         rc = scsi_add_host(shost, &pdev->dev);
 829         if (rc)
 830                 goto err_out_ha_free;
 831         rc = pm8001_request_irq(pm8001_ha);
 832         if (rc) {
 833                 PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
 834                         "pm8001_request_irq failed [ret: %d]\n", rc));
 835                 goto err_out_shost;
 836         }
 837
 838         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
 839         if (pm8001_ha->chip_id != chip_8001) {
 840                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
 841                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
 842                 /* setup thermal configuration. */
 843                 pm80xx_set_thermal_config(pm8001_ha);
 844         }
 845
 846         pm8001_init_sas_add(pm8001_ha);
 847         pm8001_post_sas_ha_init(shost, chip);
 848         rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
 849         if (rc)
 850                 goto err_out_shost;
 851         scsi_scan_host(pm8001_ha->shost);
 852         return 0;
 853
 854 err_out_shost:
 855         scsi_remove_host(pm8001_ha->shost);
 856 err_out_ha_free:
 857         pm8001_free(pm8001_ha);
 858 err_out_free:
 859         kfree(SHOST_TO_SAS_HA(shost));
 860 err_out_free_host:
 861         kfree(shost);
 862 err_out_regions:
 863         pci_release_regions(pdev);
 864 err_out_disable:
 865         pci_disable_device(pdev);
 866 err_out_enable:
 867         return rc;
 868 }
 869
 870 static void pm8001_pci_remove(struct pci_dev *pdev)
 871 {
 872         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 873         struct pm8001_hba_info *pm8001_ha;
 874         int i;
 875         pm8001_ha = sha->lldd_ha;
 876         pci_set_drvdata(pdev, NULL);
 877         sas_unregister_ha(sha);
 878         sas_remove_host(pm8001_ha->shost);
 879         list_del(&pm8001_ha->list);
 880         scsi_remove_host(pm8001_ha->shost);
 881         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 882         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 883
 884 #ifdef PM8001_USE_MSIX
 885         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 886                 synchronize_irq(pm8001_ha->msix_entries[i].vector);
 887         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 888                 free_irq(pm8001_ha->msix_entries[i].vector,
 889                                 &pm8001_ha->outq[i]);
 890         pci_disable_msix(pdev);
 891 #else
 892         free_irq(pm8001_ha->irq, sha);
 893 #endif
 894 #ifdef PM8001_USE_TASKLET
 895         tasklet_kill(&pm8001_ha->tasklet);
 896 #endif
 897         pm8001_free(pm8001_ha);
 898         kfree(sha->sas_phy);
 899         kfree(sha->sas_port);
 900         kfree(sha);
 901         pci_release_regions(pdev);
 902         pci_disable_device(pdev);
 903 }
 904
 905 /**
 906  * pm8001_pci_suspend - power management suspend main entry point
 907  * @pdev: PCI device struct
 908  * @state: PM state change to (usually PCI_D3)
 909  *
 910  * Returns 0 success, anything else error.
 911  */
 912 static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 913 {
 914         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 915         struct pm8001_hba_info *pm8001_ha;
 916         int i;
 917         u32 device_state;
 918         pm8001_ha = sha->lldd_ha;
 919         flush_workqueue(pm8001_wq);
 920         scsi_block_requests(pm8001_ha->shost);
 921         if (!pdev->pm_cap) {
 922                 dev_err(&pdev->dev, " PCI PM not supported\n");
 923                 return -ENODEV;
 924         }
 925         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 926         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 927 #ifdef PM8001_USE_MSIX
 928         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 929                 synchronize_irq(pm8001_ha->msix_entries[i].vector);
 930         for (i = 0; i < pm8001_ha->number_of_intr; i++)
 931                 free_irq(pm8001_ha->msix_entries[i].vector,
 932                                 &pm8001_ha->outq[i]);
 933         pci_disable_msix(pdev);
 934 #else
 935         free_irq(pm8001_ha->irq, sha);
 936 #endif
 937 #ifdef PM8001_USE_TASKLET
 938         tasklet_kill(&pm8001_ha->tasklet);
 939 #endif
 940         device_state = pci_choose_state(pdev, state);
 941         pm8001_printk("pdev=0x%p, slot=%s, entering "
 942                       "operating state [D%d]\n", pdev,
 943                       pm8001_ha->name, device_state);
 944         pci_save_state(pdev);
 945         pci_disable_device(pdev);
 946         pci_set_power_state(pdev, device_state);
 947         return 0;
 948 }
 949
 950 /**
 951  * pm8001_pci_resume - power management resume main entry point
 952  * @pdev: PCI device struct
 953  *
 954  * Returns 0 success, anything else error.
 955  */
 956 static int pm8001_pci_resume(struct pci_dev *pdev)
 957 {
 958         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
 959         struct pm8001_hba_info *pm8001_ha;
 960         int rc;
 961         u8 i = 0;
 962         u32 device_state;
 963         pm8001_ha = sha->lldd_ha;
 964         device_state = pdev->current_state;
 965
 966         pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
 967                 "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
 968
 969         pci_set_power_state(pdev, PCI_D0);
 970         pci_enable_wake(pdev, PCI_D0, 0);
 971         pci_restore_state(pdev);
 972         rc = pci_enable_device(pdev);
 973         if (rc) {
 974                 pm8001_printk("slot=%s Enable device failed during resume\n",
 975                               pm8001_ha->name);
 976                 goto err_out_enable;
 977         }
 978
 979         pci_set_master(pdev);
 980         rc = pci_go_44(pdev);
 981         if (rc)
 982                 goto err_out_disable;
 983
 984         /* chip soft rst only for spc */
 985         if (pm8001_ha->chip_id == chip_8001) {
 986                 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
 987                 PM8001_INIT_DBG(pm8001_ha,
 988                         pm8001_printk("chip soft reset successful\n"));
 989         }
 990         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
 991         if (rc)
 992                 goto err_out_disable;
 993
 994         /* disable all the interrupt bits */
 995         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
 996
 997         rc = pm8001_request_irq(pm8001_ha);
 998         if (rc)
 999                 goto err_out_disable;
1000 #ifdef PM8001_USE_TASKLET
1001         /* default tasklet for non msi-x interrupt handler/first msi-x
1002         * interrupt handler */
1003         tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
1004                         (unsigned long)pm8001_ha);
1005 #endif
1006         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1007         if (pm8001_ha->chip_id != chip_8001) {
1008                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1009                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1010         }
1011         scsi_unblock_requests(pm8001_ha->shost);
1012         return 0;
1013
1014 err_out_disable:
1015         scsi_remove_host(pm8001_ha->shost);
1016         pci_disable_device(pdev);
1017 err_out_enable:
1018         return rc;
1019 }
1020
1021 /* update of pci device, vendor id and driver data with
1022  * unique value for each of the controller
1023  */
1024 static struct pci_device_id pm8001_pci_table[] = {
1025         { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1026         {
1027                 PCI_DEVICE(0x117c, 0x0042),
1028                 .driver_data = chip_8001
1029         },
1030         /* Support for SPC/SPCv/SPCve controllers */
1031         { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1032         { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1033         { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1034         { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1035         { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1036         { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1037         { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1038         { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1039         { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1040         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1041                 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1042         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1043                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1044         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1045                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1046         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1047                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1048         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1049                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1050         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1051                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1052         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1053                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1054         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1055                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1056         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1057                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1058         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1059                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1060         {} /* terminate list */
1061 };
1062
1063 static struct pci_driver pm8001_pci_driver = {
1064         .name           = DRV_NAME,
1065         .id_table       = pm8001_pci_table,
1066         .probe          = pm8001_pci_probe,
1067         .remove         = pm8001_pci_remove,
1068         .suspend        = pm8001_pci_suspend,
1069         .resume         = pm8001_pci_resume,
1070 };
1071
1072 /**
1073  *      pm8001_init - initialize scsi transport template
1074  */
1075 static int __init pm8001_init(void)
1076 {
1077         int rc = -ENOMEM;
1078
1079         pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1080         if (!pm8001_wq)
1081                 goto err;
1082
1083         pm8001_id = 0;
1084         pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1085         if (!pm8001_stt)
1086                 goto err_wq;
1087         rc = pci_register_driver(&pm8001_pci_driver);
1088         if (rc)
1089                 goto err_tp;
1090         return 0;
1091
1092 err_tp:
1093         sas_release_transport(pm8001_stt);
1094 err_wq:
1095         destroy_workqueue(pm8001_wq);
1096 err:
1097         return rc;
1098 }
1099
1100 static void __exit pm8001_exit(void)
1101 {
1102         pci_unregister_driver(&pm8001_pci_driver);
1103         sas_release_transport(pm8001_stt);
1104         destroy_workqueue(pm8001_wq);
1105 }
1106
1107 module_init(pm8001_init);
1108 module_exit(pm8001_exit);
1109
1110 MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
1111 MODULE_DESCRIPTION(
1112                 "PMC-Sierra PM8001/8081/8088/8089 SAS/SATA controller driver");
1113 MODULE_VERSION(DRV_VERSION);
1114 MODULE_LICENSE("GPL");
1115 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1116