]> git.karo-electronics.de Git - karo-tx-linux.git/blob - include/sound/dmaengine_pcm.h
Merge remote-tracking branch 'input/next'
[karo-tx-linux.git] / include / sound / dmaengine_pcm.h
1 /*
2  *  Copyright (C) 2012, Analog Devices Inc.
3  *      Author: Lars-Peter Clausen <lars@metafoo.de>
4  *
5  *  This program is free software; you can redistribute it and/or modify it
6  *  under  the terms of the GNU General  Public License as published by the
7  *  Free Software Foundation;  either version 2 of the License, or (at your
8  *  option) any later version.
9  *
10  *  You should have received a copy of the GNU General Public License along
11  *  with this program; if not, write to the Free Software Foundation, Inc.,
12  *  675 Mass Ave, Cambridge, MA 02139, USA.
13  *
14  */
15 #ifndef __SOUND_DMAENGINE_PCM_H__
16 #define __SOUND_DMAENGINE_PCM_H__
17
18 #include <sound/pcm.h>
19 #include <sound/soc.h>
20 #include <linux/dmaengine.h>
21
22 /**
23  * snd_pcm_substream_to_dma_direction - Get dma_transfer_direction for a PCM
24  *   substream
25  * @substream: PCM substream
26  */
27 static inline enum dma_transfer_direction
28 snd_pcm_substream_to_dma_direction(const struct snd_pcm_substream *substream)
29 {
30         if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
31                 return DMA_MEM_TO_DEV;
32         else
33                 return DMA_DEV_TO_MEM;
34 }
35
36 int snd_hwparams_to_dma_slave_config(const struct snd_pcm_substream *substream,
37         const struct snd_pcm_hw_params *params, struct dma_slave_config *slave_config);
38 int snd_dmaengine_pcm_trigger(struct snd_pcm_substream *substream, int cmd);
39 snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream);
40 snd_pcm_uframes_t snd_dmaengine_pcm_pointer_no_residue(struct snd_pcm_substream *substream);
41
42 int snd_dmaengine_pcm_open(struct snd_pcm_substream *substream,
43         struct dma_chan *chan);
44 int snd_dmaengine_pcm_close(struct snd_pcm_substream *substream);
45
46 int snd_dmaengine_pcm_open_request_chan(struct snd_pcm_substream *substream,
47         dma_filter_fn filter_fn, void *filter_data);
48 int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream);
49
50 struct dma_chan *snd_dmaengine_pcm_request_channel(dma_filter_fn filter_fn,
51         void *filter_data);
52 struct dma_chan *snd_dmaengine_pcm_get_chan(struct snd_pcm_substream *substream);
53
54 /**
55  * struct snd_dmaengine_dai_dma_data - DAI DMA configuration data
56  * @addr: Address of the DAI data source or destination register.
57  * @addr_width: Width of the DAI data source or destination register.
58  * @maxburst: Maximum number of words(note: words, as in units of the
59  * src_addr_width member, not bytes) that can be send to or received from the
60  * DAI in one burst.
61  * @slave_id: Slave requester id for the DMA channel.
62  * @filter_data: Custom DMA channel filter data, this will usually be used when
63  * requesting the DMA channel.
64  * @fifo_size: FIFO size of the DAI controller in bytes
65  */
66 struct snd_dmaengine_dai_dma_data {
67         dma_addr_t addr;
68         enum dma_slave_buswidth addr_width;
69         u32 maxburst;
70         unsigned int slave_id;
71         void *filter_data;
72         unsigned int fifo_size;
73 };
74
75 void snd_dmaengine_pcm_set_config_from_dai_data(
76         const struct snd_pcm_substream *substream,
77         const struct snd_dmaengine_dai_dma_data *dma_data,
78         struct dma_slave_config *config);
79
80
81 /*
82  * Try to request the DMA channel using compat_request_channel or
83  * compat_filter_fn if it couldn't be requested through devicetree.
84  */
85 #define SND_DMAENGINE_PCM_FLAG_COMPAT BIT(0)
86 /*
87  * Don't try to request the DMA channels through devicetree. This flag only
88  * makes sense if SND_DMAENGINE_PCM_FLAG_COMPAT is set as well.
89  */
90 #define SND_DMAENGINE_PCM_FLAG_NO_DT BIT(1)
91 /*
92  * The platforms dmaengine driver does not support reporting the amount of
93  * bytes that are still left to transfer.
94  */
95 #define SND_DMAENGINE_PCM_FLAG_NO_RESIDUE BIT(2)
96 /*
97  * The PCM is half duplex and the DMA channel is shared between capture and
98  * playback.
99  */
100 #define SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX BIT(3)
101
102 /**
103  * struct snd_dmaengine_pcm_config - Configuration data for dmaengine based PCM
104  * @prepare_slave_config: Callback used to fill in the DMA slave_config for a
105  *   PCM substream. Will be called from the PCM drivers hwparams callback.
106  * @compat_request_channel: Callback to request a DMA channel for platforms
107  *   which do not use devicetree.
108  * @compat_filter_fn: Will be used as the filter function when requesting a
109  *  channel for platforms which do not use devicetree. The filter parameter
110  *  will be the DAI's DMA data.
111  * @pcm_hardware: snd_pcm_hardware struct to be used for the PCM.
112  * @prealloc_buffer_size: Size of the preallocated audio buffer.
113  *
114  * Note: If both compat_request_channel and compat_filter_fn are set
115  * compat_request_channel will be used to request the channel and
116  * compat_filter_fn will be ignored. Otherwise the channel will be requested
117  * using dma_request_channel with compat_filter_fn as the filter function.
118  */
119 struct snd_dmaengine_pcm_config {
120         int (*prepare_slave_config)(struct snd_pcm_substream *substream,
121                         struct snd_pcm_hw_params *params,
122                         struct dma_slave_config *slave_config);
123         struct dma_chan *(*compat_request_channel)(
124                         struct snd_soc_pcm_runtime *rtd,
125                         struct snd_pcm_substream *substream);
126         dma_filter_fn compat_filter_fn;
127
128         const struct snd_pcm_hardware *pcm_hardware;
129         unsigned int prealloc_buffer_size;
130 };
131
132 int snd_dmaengine_pcm_register(struct device *dev,
133         const struct snd_dmaengine_pcm_config *config,
134         unsigned int flags);
135 void snd_dmaengine_pcm_unregister(struct device *dev);
136
137 int snd_dmaengine_pcm_prepare_slave_config(struct snd_pcm_substream *substream,
138         struct snd_pcm_hw_params *params,
139         struct dma_slave_config *slave_config);
140
141 #endif