xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers

commit 98d74f9ceaefc2b6c4a6440050163a83be0abede upstream.

PCI hotpluggable xhci controllers such as some Alpine Ridge solutions will
remove the xhci controller from the PCI bus when the last USB device is
disconnected.

Add a flag to indicate that the host is being removed to avoid queueing
configure_endpoint commands for the dropped endpoints.
For PCI hotplugged controllers this will prevent 5 second command timeouts
For static xhci controllers the configure_endpoint command is not needed
in the removal case as everything will be returned, freed, and the
controller is reset.

For now the flag is only set for PCI connected host controllers.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 6a120a71ca3d2d8bc36641d47c7009bca146a11c..ea4fb4b0cd44da050192e23b5522e8e6f95295dd 100644 (file)
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -301,6 +301,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
        struct xhci_hcd *xhci;
 
        xhci = hcd_to_xhci(pci_get_drvdata(dev));
+       xhci->xhc_state |= XHCI_STATE_REMOVING;
        if (xhci->shared_hcd) {
                usb_remove_hcd(xhci->shared_hcd);
                usb_put_hcd(xhci->shared_hcd);

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index db0f0831b94fc2d0c86f270134058a78974cbbdd..2b63969c2bbf8e5f202cb99d3d5c13e5e6f0d502 100644 (file)
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -4008,7 +4008,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
        int reserved_trbs = xhci->cmd_ring_reserved_trbs;
        int ret;
 
-       if (xhci->xhc_state) {
+       if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+               (xhci->xhc_state & XHCI_STATE_HALTED)) {
                xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
                return -ESHUTDOWN;
        }

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0be5beaf3f854500b7cd017dca1de00a882f4c2a..ec9e758d5fcd9413c0ca377cdb0a08e19a5404fa 100644 (file)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci)
                                "waited %u microseconds.\n",
                                XHCI_MAX_HALT_USEC);
        if (!ret)
-               xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+               /* clear state flags. Including dying, halted or removing */
+               xhci->xhc_state = 0;
 
        return ret;
 }
@@ -2753,7 +2754,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
        if (ret <= 0)
                return ret;
        xhci = hcd_to_xhci(hcd);
-       if (xhci->xhc_state & XHCI_STATE_DYING)
+       if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+               (xhci->xhc_state & XHCI_STATE_REMOVING))
                return -ENODEV;
 
        xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3800,7 +3802,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
        mutex_lock(&xhci->mutex);
 
-       if (xhci->xhc_state)    /* dying or halted */
+       if (xhci->xhc_state)    /* dying, removing or halted */
                goto out;
 
        if (!udev->slot_id) {

diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 0b9451250e33f5f82fd52f00cf05338849b81e7c..99ac2289dbf348aa2f60541121f1842a92ecc15b 100644 (file)
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1596,6 +1596,7 @@ struct xhci_hcd {
  */
 #define XHCI_STATE_DYING       (1 << 0)
 #define XHCI_STATE_HALTED      (1 << 1)
+#define XHCI_STATE_REMOVING    (1 << 2)
        /* Statistics */
        int                     error_bitmask;
        unsigned int            quirks;