ARM: dts: am335x-tx48: remove unnecessary usbhost regulator

diff --git a/arch/arm/boot/dts/am335x-tx48.dts b/arch/arm/boot/dts/am335x-tx48.dts
index f93c064657c35a0cbbc071519f56163fefdfd01a..1b4554127b46fd876b059349dab2822f36d21907 100644 (file)
--- a/arch/arm/boot/dts/am335x-tx48.dts
+++ b/arch/arm/boot/dts/am335x-tx48.dts
@@ -327,17 +327,6 @@
                        pinctrl-0 = <&pinctrl_reg_usbotg>;
                        gpio = <&gpio2 30 GPIO_ACTIVE_HIGH>;
                        enable-active-high;
-                       regulator-boot-on;
-                       regulator-always-on;
-               };
-
-               reg_usbhost: regulator@10 {
-                       compatible = "regulator-fixed";
-                       regulator-name = "usbhost-vbus";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&pinctrl_reg_usbhost>;
                };
        };
 
@@ -577,13 +566,6 @@
                >;
        };
 
-       pinctrl_reg_usbhost: usbhostgrp-1 {
-               pinctrl-single,pins = <
-                       0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus    USBH_VBUSEN */
-                       0x21c (PIN_INPUT_PULLUP | MUX_MODE7)    /* usb0_drvvbus.gpio0_18        #USBH_OC */
-               >;
-       };
-
        pinctrl_reg_usbotg: usbotggrp-2 {
                pinctrl-single,pins = <
                        0x100 (PIN_OUTPUT | MUX_MODE7)          /* mmc0_clk.gpio2_30            USBOTG_VBUSEN */
@@ -912,6 +894,5 @@
 &usb1_phy {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_usbhost>;
-       vcc-supply = <&reg_usbhost>;
        status = "okay";
 };