]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
net: dsa: Mop up remaining NET_DSA_HWMON references
authorAndrew Lunn <andrew@lunn.ch>
Wed, 25 Jan 2017 14:04:17 +0000 (15:04 +0100)
committerDavid S. Miller <davem@davemloft.net>
Wed, 25 Jan 2017 19:45:05 +0000 (14:45 -0500)
Previous patches have moved the temperature sensor code into the
Marvell PHYs. A few now dead references to NET_DSA_HWMON were left
behind. Go reap them.

Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/networking/dsa/dsa.txt
include/net/dsa.h

index 63912ef346069b228b984c2f2d1a70f0c9c6ffc0..b8b40753133e75a548400b2035efd72ef105b2f9 100644 (file)
@@ -295,7 +295,6 @@ DSA currently leverages the following subsystems:
 - MDIO/PHY library: drivers/net/phy/phy.c, mdio_bus.c
 - Switchdev: net/switchdev/*
 - Device Tree for various of_* functions
-- HWMON: drivers/hwmon/*
 
 MDIO/PHY library
 ----------------
@@ -349,12 +348,6 @@ Documentation/devicetree/bindings/net/dsa/dsa.txt. PHY/MDIO library helper
 functions such as of_get_phy_mode(), of_phy_connect() are also used to query
 per-port PHY specific details: interface connection, MDIO bus location etc..
 
-HWMON
------
-
-Some switch drivers feature internal temperature sensors which are exposed as
-regular HWMON devices in /sys/class/hwmon/.
-
 Driver development
 ==================
 
@@ -495,23 +488,6 @@ Power management
   BR_STATE_DISABLED and propagating changes to the hardware if this port is
   disabled while being a bridge member
 
-Hardware monitoring
--------------------
-
-These callbacks are only available if CONFIG_NET_DSA_HWMON is enabled:
-
-- get_temp: this function queries the given switch for its temperature
-
-- get_temp_limit: this function returns the switch current maximum temperature
-  limit
-
-- set_temp_limit: this function configures the maximum temperature limit allowed
-
-- get_temp_alarm: this function returns the critical temperature threshold
-  returning an alarm notification
-
-See Documentation/hwmon/sysfs-interface for details.
-
 Bridge layer
 ------------
 
index 9d6cd923c48cfd1b9836faf6007761480cab0c9e..08b340403927d8ca06726d853514535801b9d96b 100644 (file)
@@ -178,14 +178,6 @@ struct dsa_switch {
         */
        s8              rtable[DSA_MAX_SWITCHES];
 
-#ifdef CONFIG_NET_DSA_HWMON
-       /*
-        * Hardware monitoring information
-        */
-       char                    hwmon_name[IFNAMSIZ + 8];
-       struct device           *hwmon_dev;
-#endif
-
        /*
         * The lower device this switch uses to talk to the host
         */