powerpc/47x: allow kernel to be loaded in higher physical memory

The 44x code (which is shared by 47x) assumes the available physical memory
begins at 0x00000000.  This is not necessarily the case in an AMP
environment.

Support CONFIG_RELOCATABLE for 476 in order to allow the kernel to be
loaded into a higher memory range.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index c15f2e61e4fdf4b239dfac7205d82dc99fbcccee..f8e578be58061021298e11cad87910a6b1a12204 100644 (file)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -842,7 +842,7 @@ config LOWMEM_CAM_NUM
 
 config RELOCATABLE
        bool "Build a relocatable kernel (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
+       depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
        help
          This builds a kernel image that is capable of running at the
          location the kernel is loaded at (some alignment restrictions may

diff --git a/arch/powerpc/configs/44x/iss476-smp_defconfig b/arch/powerpc/configs/44x/iss476-smp_defconfig
index 92f863ac8443dd53e77456961cf3a153e335a4b2..a6eb6ad05b2dcc1176126d2082fba01e76437f6f 100644 (file)
--- a/arch/powerpc/configs/44x/iss476-smp_defconfig
+++ b/arch/powerpc/configs/44x/iss476-smp_defconfig
@@ -3,8 +3,8 @@ CONFIG_SMP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_SPARSE_IRQ=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
@@ -21,10 +21,11 @@ CONFIG_ISS4xx=y
 CONFIG_HZ_100=y
 CONFIG_MATH_EMULATION=y
 CONFIG_IRQ_ALL_CPUS=y
-CONFIG_SPARSE_IRQ=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="root=/dev/issblk0"
 # CONFIG_PCI is not set
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_RELOCATABLE=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -67,7 +68,6 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_INOTIFY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y

diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 5e12b741ba5fc15d5a7783dd5488dc8f315b9f77..f8e971ba94f5b66231da5194f125efd35020b5d6 100644 (file)
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -93,6 +93,30 @@ _ENTRY(_start);
 
        bl      early_init
 
+#ifdef CONFIG_RELOCATABLE
+       /*
+        * r25 will contain RPN/ERPN for the start address of memory
+        *
+        * Add the difference between KERNELBASE and PAGE_OFFSET to the
+        * start of physical memory to get kernstart_addr.
+        */
+       lis     r3,kernstart_addr@ha
+       la      r3,kernstart_addr@l(r3)
+
+       lis     r4,KERNELBASE@h
+       ori     r4,r4,KERNELBASE@l
+       lis     r5,PAGE_OFFSET@h
+       ori     r5,r5,PAGE_OFFSET@l
+       subf    r4,r5,r4
+
+       rlwinm  r6,r25,0,28,31  /* ERPN */
+       rlwinm  r7,r25,0,0,3    /* RPN - assuming 256 MB page size */
+       add     r7,r7,r4
+
+       stw     r6,0(r3)
+       stw     r7,4(r3)
+#endif
+
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
@@ -1001,9 +1025,6 @@ clear_utlb_entry:
        lis     r3,PAGE_OFFSET@h
        ori     r3,r3,PAGE_OFFSET@l
 
-       /* Kernel is at the base of RAM */
-       li r4, 0                        /* Load the kernel physical address */
-
        /* Load the kernel PID = 0 */
        li      r0,0
        mtspr   SPRN_PID,r0
@@ -1013,9 +1034,8 @@ clear_utlb_entry:
        clrrwi  r3,r3,12                /* Mask off the effective page number */
        ori     r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M
 
-       /* Word 1 */
-       clrrwi  r4,r4,12                /* Mask off the real page number */
-                                       /* ERPN is 0 for first 4GB page */
+       /* Word 1 - use r25.  RPN is the same as the original entry */
+
        /* Word 2 */
        li      r5,0
        ori     r5,r5,PPC47x_TLB2_S_RWX
@@ -1026,7 +1046,7 @@ clear_utlb_entry:
        /* We write to way 0 and bolted 0 */
        lis     r0,0x8800
        tlbwe   r3,r0,0
-       tlbwe   r4,r0,1
+       tlbwe   r25,r0,1
        tlbwe   r5,r0,2
 
 /*
@@ -1124,7 +1144,13 @@ head_start_common:
        lis     r4,interrupt_base@h     /* IVPR only uses the high 16-bits */
        mtspr   SPRN_IVPR,r4
 
-       addis   r22,r22,KERNELBASE@h
+       /*
+        * If the kernel was loaded at a non-zero 256 MB page, we need to
+        * mask off the most significant 4 bits to get the relative address
+        * from the start of physical memory
+        */
+       rlwinm  r22,r22,0,4,31
+       addis   r22,r22,PAGE_OFFSET@h
        mtlr    r22
        isync
        blr

diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 024acab588fd5bcf54b58dd194429727bc122ffd..f60e006d90c3520c41905b2140fd522707214921 100644 (file)
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -186,10 +186,11 @@ void __init MMU_init_hw(void)
 unsigned long __init mmu_mapin_ram(unsigned long top)
 {
        unsigned long addr;
+       unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
 
        /* Pin in enough TLBs to cover any lowmem not covered by the
         * initial 256M mapping established in head_44x.S */
-       for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+       for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
             addr += PPC_PIN_SIZE) {
                if (mmu_has_feature(MMU_FTR_TYPE_47x))
                        ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);
@@ -218,19 +219,25 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 void setup_initial_memory_limit(phys_addr_t first_memblock_base,
                                phys_addr_t first_memblock_size)
 {
+       u64 size;
+
+#ifndef CONFIG_RELOCATABLE
        /* We don't currently support the first MEMBLOCK not mapping 0
         * physical on those processors
         */
        BUG_ON(first_memblock_base != 0);
+#endif
 
        /* 44x has a 256M TLB entry pinned at boot */
-       memblock_set_current_limit(min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+       size = (min_t(u64, first_memblock_size, PPC_PIN_SIZE));
+       memblock_set_current_limit(first_memblock_base + size);
 }
 
 #ifdef CONFIG_SMP
 void __cpuinit mmu_init_secondary(int cpu)
 {
        unsigned long addr;
+       unsigned long memstart = memstart_addr & ~(PPC_PIN_SIZE - 1);
 
        /* Pin in enough TLBs to cover any lowmem not covered by the
         * initial 256M mapping established in head_44x.S
@@ -241,7 +248,7 @@ void __cpuinit mmu_init_secondary(int cpu)
         * stack. current (r2) isn't initialized, smp_processor_id()
         * will not work, current thread info isn't accessible, ...
         */
-       for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
+       for (addr = memstart + PPC_PIN_SIZE; addr < lowmem_end_addr;
             addr += PPC_PIN_SIZE) {
                if (mmu_has_feature(MMU_FTR_TYPE_47x))
                        ppc47x_pin_tlb(addr + PAGE_OFFSET, addr);