bias-pull-up - pull up the pin
bias-pull-down - pull down the pin
bias-pull-pin-default - use pin-default pull state
-bi-directional - pin supports simultaneous input/output operations
drive-push-pull - drive actively high and low
drive-open-drain - drive with open drain
drive-open-source - drive with open source
power-source - select between different power supplies
low-power-enable - enable low power mode
low-power-disable - disable low power mode
-output-enable - enable output on pin regardless of output value
output-low - set the pin to output mode with low level
output-high - set the pin to output mode with high level
slew-rate - set the slew rate
struct thread_info *ti = task_thread_info(p);
struct pt_regs *childregs, *regs = current_pt_regs();
unsigned long childksp;
- p->set_child_tid = p->clear_child_tid = NULL;
childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE - 32;
top_of_kernel_stack = sp;
- p->set_child_tid = p->clear_child_tid = NULL;
-
/* Locate userspace context on stack... */
sp -= STACK_FRAME_OVERHEAD; /* redzone */
sp -= sizeof(struct pt_regs);
DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION);
DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL);
DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(product_family, 0400, DMI_PRODUCT_FAMILY);
DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR);
DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME);
DEFINE_DMI_ATTR_WITH_SHOW(board_version, 0444, DMI_BOARD_VERSION);
ADD_DMI_ATTR(product_version, DMI_PRODUCT_VERSION);
ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL);
ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID);
+ ADD_DMI_ATTR(product_family, DMI_PRODUCT_FAMILY);
ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR);
ADD_DMI_ATTR(board_name, DMI_BOARD_NAME);
ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION);
dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
+ dmi_save_ident(dm, DMI_PRODUCT_FAMILY, 26);
break;
case 2: /* Base Board Information */
dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
* pinctrl_generic_free_groups() - removes all pin groups
* @pctldev: pin controller device
*
- * Note that the caller must take care of locking.
+ * Note that the caller must take care of locking. The pinctrl groups
+ * are allocated with devm_kzalloc() so no need to free them here.
*/
static void pinctrl_generic_free_groups(struct pinctrl_dev *pctldev)
{
struct radix_tree_iter iter;
- struct group_desc *group;
- unsigned long *indices;
void **slot;
- int i = 0;
-
- indices = devm_kzalloc(pctldev->dev, sizeof(*indices) *
- pctldev->num_groups, GFP_KERNEL);
- if (!indices)
- return;
radix_tree_for_each_slot(slot, &pctldev->pin_group_tree, &iter, 0)
- indices[i++] = iter.index;
-
- for (i = 0; i < pctldev->num_groups; i++) {
- group = radix_tree_lookup(&pctldev->pin_group_tree,
- indices[i]);
- radix_tree_delete(&pctldev->pin_group_tree, indices[i]);
- devm_kfree(pctldev->dev, group);
- }
+ radix_tree_delete(&pctldev->pin_group_tree, iter.index);
pctldev->num_groups = 0;
}
return 0;
}
+static void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift, void __iomem *reg)
+{
+ u32 tmp;
+
+ tmp = readl(reg);
+ tmp &= ~(mask << shift);
+ tmp |= value << shift;
+ writel(tmp, reg);
+}
+
static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
unsigned group)
{
reg += bank * 0x20 + pin / 16 * 0x10;
shift = pin % 16 * 2;
- writel(0x3 << shift, reg + CLR);
- writel(g->muxsel[i] << shift, reg + SET);
+ mxs_pinctrl_rmwl(g->muxsel[i], 0x3, shift, reg);
}
return 0;
/* mA */
if (config & MA_PRESENT) {
shift = pin % 8 * 4;
- writel(0x3 << shift, reg + CLR);
- writel(ma << shift, reg + SET);
+ mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
}
/* vol */
* is not listed below.
*/
static const struct dmi_system_id chv_no_valid_mask[] = {
+ /* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */
{
- /* See https://bugzilla.kernel.org/show_bug.cgi?id=194945 */
- .ident = "Acer Chromebook (CYAN)",
+ .ident = "Intel_Strago based Chromebooks (All models)",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
- DMI_MATCH(DMI_PRODUCT_NAME, "Edgar"),
- DMI_MATCH(DMI_BIOS_DATE, "05/21/2016"),
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "Intel_Strago"),
},
- }
+ },
+ {
+ .ident = "Acer Chromebook R11 (Cyan)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Cyan"),
+ },
+ },
+ {
+ .ident = "Samsung Chromebook 3 (Celes)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Celes"),
+ },
+ },
+ {}
};
static int chv_gpio_probe(struct chv_pinctrl *pctrl, int irq)
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
"input bias pull to pin specific state", NULL, false),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up", NULL, false),
- PCONFDUMP(PIN_CONFIG_BIDIRECTIONAL, "bi-directional pin operations", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL, false),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL, false),
{ "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
{ "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
- { "bi-directional", PIN_CONFIG_BIDIRECTIONAL, 1 },
{ "drive-open-drain", PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
{ "drive-open-source", PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
{ "drive-push-pull", PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
{ "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
{ "low-power-disable", PIN_CONFIG_LOW_POWER_MODE, 0 },
{ "low-power-enable", PIN_CONFIG_LOW_POWER_MODE, 1 },
- { "output-enable", PIN_CONFIG_OUTPUT, 1, },
{ "output-high", PIN_CONFIG_OUTPUT, 1, },
{ "output-low", PIN_CONFIG_OUTPUT, 0, },
{ "power-source", PIN_CONFIG_POWER_SOURCE, 0 },
* pinmux_generic_free_functions() - removes all functions
* @pctldev: pin controller device
*
- * Note that the caller must take care of locking.
+ * Note that the caller must take care of locking. The pinctrl
+ * functions are allocated with devm_kzalloc() so no need to free
+ * them here.
*/
void pinmux_generic_free_functions(struct pinctrl_dev *pctldev)
{
struct radix_tree_iter iter;
- struct function_desc *function;
- unsigned long *indices;
void **slot;
- int i = 0;
-
- indices = devm_kzalloc(pctldev->dev, sizeof(*indices) *
- pctldev->num_functions, GFP_KERNEL);
- if (!indices)
- return;
radix_tree_for_each_slot(slot, &pctldev->pin_function_tree, &iter, 0)
- indices[i++] = iter.index;
-
- for (i = 0; i < pctldev->num_functions; i++) {
- function = radix_tree_lookup(&pctldev->pin_function_tree,
- indices[i]);
- radix_tree_delete(&pctldev->pin_function_tree, indices[i]);
- devm_kfree(pctldev->dev, function);
- }
+ radix_tree_delete(&pctldev->pin_function_tree, iter.index);
pctldev->num_functions = 0;
}
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 18),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
- SUNXI_FUNCTION(0x3, "owa")), /* DOUT */
+ SUNXI_FUNCTION(0x3, "spdif")), /* DOUT */
SUNXI_PIN(SUNXI_PINCTRL_PIN(E, 19),
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out")),
config OVERLAY_FS
tristate "Overlay filesystem support"
+ select EXPORTFS
help
An overlay filesystem combines two filesystems - an 'upper' filesystem
and a 'lower' filesystem. When a name exists in both filesystems, the
return PTR_ERR(fh);
}
- err = ovl_do_setxattr(upper, OVL_XATTR_ORIGIN, fh, fh ? fh->len : 0, 0);
+ /*
+ * Do not fail when upper doesn't support xattrs.
+ */
+ err = ovl_check_setxattr(dentry, upper, OVL_XATTR_ORIGIN, fh,
+ fh ? fh->len : 0, 0);
kfree(fh);
return err;
if (tmpfile)
temp = ovl_do_tmpfile(upperdir, stat->mode);
else
- temp = ovl_lookup_temp(workdir, dentry);
- err = PTR_ERR(temp);
- if (IS_ERR(temp))
- goto out1;
-
+ temp = ovl_lookup_temp(workdir);
err = 0;
- if (!tmpfile)
+ if (IS_ERR(temp)) {
+ err = PTR_ERR(temp);
+ temp = NULL;
+ }
+
+ if (!err && !tmpfile)
err = ovl_create_real(wdir, temp, &cattr, NULL, true);
if (new_creds) {
ovl_path_upper(parent, &parentpath);
upperdir = parentpath.dentry;
+ /* Mark parent "impure" because it may now contain non-pure upper */
+ err = ovl_set_impure(parent, upperdir);
+ if (err)
+ return err;
+
err = vfs_getattr(&parentpath, &pstat,
STATX_ATIME | STATX_MTIME, AT_STATX_SYNC_AS_STAT);
if (err)
}
}
-struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry)
+struct dentry *ovl_lookup_temp(struct dentry *workdir)
{
struct dentry *temp;
char name[20];
struct dentry *whiteout;
struct inode *wdir = workdir->d_inode;
- whiteout = ovl_lookup_temp(workdir, dentry);
+ whiteout = ovl_lookup_temp(workdir);
if (IS_ERR(whiteout))
return whiteout;
return err;
}
-static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry)
+static int ovl_set_opaque_xerr(struct dentry *dentry, struct dentry *upper,
+ int xerr)
{
int err;
- err = ovl_do_setxattr(upperdentry, OVL_XATTR_OPAQUE, "y", 1, 0);
+ err = ovl_check_setxattr(dentry, upper, OVL_XATTR_OPAQUE, "y", 1, xerr);
if (!err)
ovl_dentry_set_opaque(dentry);
return err;
}
+static int ovl_set_opaque(struct dentry *dentry, struct dentry *upperdentry)
+{
+ /*
+ * Fail with -EIO when trying to create opaque dir and upper doesn't
+ * support xattrs. ovl_rename() calls ovl_set_opaque_xerr(-EXDEV) to
+ * return a specific error for noxattr case.
+ */
+ return ovl_set_opaque_xerr(dentry, upperdentry, -EIO);
+}
+
/* Common operations required to be done after creation of file on upper */
static void ovl_instantiate(struct dentry *dentry, struct inode *inode,
struct dentry *newdentry, bool hardlink)
return OVL_TYPE_MERGE(ovl_path_type(dentry));
}
+static bool ovl_type_origin(struct dentry *dentry)
+{
+ return OVL_TYPE_ORIGIN(ovl_path_type(dentry));
+}
+
static int ovl_create_upper(struct dentry *dentry, struct inode *inode,
struct cattr *attr, struct dentry *hardlink)
{
if (upper->d_parent->d_inode != udir)
goto out_unlock;
- opaquedir = ovl_lookup_temp(workdir, dentry);
+ opaquedir = ovl_lookup_temp(workdir);
err = PTR_ERR(opaquedir);
if (IS_ERR(opaquedir))
goto out_unlock;
if (err)
goto out;
- newdentry = ovl_lookup_temp(workdir, dentry);
+ newdentry = ovl_lookup_temp(workdir);
err = PTR_ERR(newdentry);
if (IS_ERR(newdentry))
goto out_unlock;
if (IS_ERR(redirect))
return PTR_ERR(redirect);
- err = ovl_do_setxattr(ovl_dentry_upper(dentry), OVL_XATTR_REDIRECT,
- redirect, strlen(redirect), 0);
+ err = ovl_check_setxattr(dentry, ovl_dentry_upper(dentry),
+ OVL_XATTR_REDIRECT,
+ redirect, strlen(redirect), -EXDEV);
if (!err) {
spin_lock(&dentry->d_lock);
ovl_dentry_set_redirect(dentry, redirect);
spin_unlock(&dentry->d_lock);
} else {
kfree(redirect);
- if (err == -EOPNOTSUPP)
- ovl_clear_redirect_dir(dentry->d_sb);
- else
- pr_warn_ratelimited("overlay: failed to set redirect (%i)\n", err);
+ pr_warn_ratelimited("overlay: failed to set redirect (%i)\n", err);
/* Fall back to userspace copy-up */
err = -EXDEV;
}
old_upperdir = ovl_dentry_upper(old->d_parent);
new_upperdir = ovl_dentry_upper(new->d_parent);
+ if (!samedir) {
+ /*
+ * When moving a merge dir or non-dir with copy up origin into
+ * a new parent, we are marking the new parent dir "impure".
+ * When ovl_iterate() iterates an "impure" upper dir, it will
+ * lookup the origin inodes of the entries to fill d_ino.
+ */
+ if (ovl_type_origin(old)) {
+ err = ovl_set_impure(new->d_parent, new_upperdir);
+ if (err)
+ goto out_revert_creds;
+ }
+ if (!overwrite && ovl_type_origin(new)) {
+ err = ovl_set_impure(old->d_parent, old_upperdir);
+ if (err)
+ goto out_revert_creds;
+ }
+ }
+
trap = lock_rename(new_upperdir, old_upperdir);
olddentry = lookup_one_len(old->d_name.name, old_upperdir,
if (ovl_type_merge_or_lower(old))
err = ovl_set_redirect(old, samedir);
else if (!old_opaque && ovl_type_merge(new->d_parent))
- err = ovl_set_opaque(old, olddentry);
+ err = ovl_set_opaque_xerr(old, olddentry, -EXDEV);
if (err)
goto out_dput;
}
if (ovl_type_merge_or_lower(new))
err = ovl_set_redirect(new, samedir);
else if (!new_opaque && ovl_type_merge(old->d_parent))
- err = ovl_set_opaque(new, newdentry);
+ err = ovl_set_opaque_xerr(new, newdentry, -EXDEV);
if (err)
goto out_dput;
}
return res;
}
+static bool ovl_can_list(const char *s)
+{
+ /* List all non-trusted xatts */
+ if (strncmp(s, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) != 0)
+ return true;
+
+ /* Never list trusted.overlay, list other trusted for superuser only */
+ return !ovl_is_private_xattr(s) && capable(CAP_SYS_ADMIN);
+}
+
ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
{
struct dentry *realdentry = ovl_dentry_real(dentry);
return -EIO;
len -= slen;
- if (ovl_is_private_xattr(s)) {
+ if (!ovl_can_list(s)) {
res -= slen;
memmove(s, s + slen, len);
} else {
static bool ovl_is_opaquedir(struct dentry *dentry)
{
- int res;
- char val;
-
- if (!d_is_dir(dentry))
- return false;
-
- res = vfs_getxattr(dentry, OVL_XATTR_OPAQUE, &val, 1);
- if (res == 1 && val == 'y')
- return true;
-
- return false;
+ return ovl_check_dir_xattr(dentry, OVL_XATTR_OPAQUE);
}
static int ovl_lookup_single(struct dentry *base, struct ovl_lookup_data *d,
unsigned int ctr = 0;
struct inode *inode = NULL;
bool upperopaque = false;
+ bool upperimpure = false;
char *upperredirect = NULL;
struct dentry *this;
unsigned int i;
poe = roe;
}
upperopaque = d.opaque;
+ if (upperdentry && d.is_dir)
+ upperimpure = ovl_is_impuredir(upperdentry);
}
if (!d.stop && poe->numlower) {
revert_creds(old_cred);
oe->opaque = upperopaque;
+ oe->impure = upperimpure;
oe->redirect = upperredirect;
oe->__upperdentry = upperdentry;
memcpy(oe->lowerstack, stack, sizeof(struct path) * ctr);
#define OVL_XATTR_OPAQUE OVL_XATTR_PREFIX "opaque"
#define OVL_XATTR_REDIRECT OVL_XATTR_PREFIX "redirect"
#define OVL_XATTR_ORIGIN OVL_XATTR_PREFIX "origin"
+#define OVL_XATTR_IMPURE OVL_XATTR_PREFIX "impure"
/*
* The tuple (fh,uuid) is a universal unique identifier for a copy up origin,
struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry);
void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache);
bool ovl_dentry_is_opaque(struct dentry *dentry);
+bool ovl_dentry_is_impure(struct dentry *dentry);
bool ovl_dentry_is_whiteout(struct dentry *dentry);
void ovl_dentry_set_opaque(struct dentry *dentry);
bool ovl_redirect_dir(struct super_block *sb);
-void ovl_clear_redirect_dir(struct super_block *sb);
const char *ovl_dentry_get_redirect(struct dentry *dentry);
void ovl_dentry_set_redirect(struct dentry *dentry, const char *redirect);
void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry);
struct file *ovl_path_open(struct path *path, int flags);
int ovl_copy_up_start(struct dentry *dentry);
void ovl_copy_up_end(struct dentry *dentry);
+bool ovl_check_dir_xattr(struct dentry *dentry, const char *name);
+int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry,
+ const char *name, const void *value, size_t size,
+ int xerr);
+int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry);
+
+static inline bool ovl_is_impuredir(struct dentry *dentry)
+{
+ return ovl_check_dir_xattr(dentry, OVL_XATTR_IMPURE);
+}
+
/* namei.c */
int ovl_path_next(int idx, struct dentry *dentry, struct path *path);
/* dir.c */
extern const struct inode_operations ovl_dir_inode_operations;
-struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry);
+struct dentry *ovl_lookup_temp(struct dentry *workdir);
struct cattr {
dev_t rdev;
umode_t mode;
/* creds of process who forced instantiation of super block */
const struct cred *creator_cred;
bool tmpfile;
+ bool noxattr;
wait_queue_head_t copyup_wq;
/* sb common to all layers */
struct super_block *same_sb;
u64 version;
const char *redirect;
bool opaque;
+ bool impure;
bool copying;
};
struct rcu_head rcu;
dput(temp);
else
pr_warn("overlayfs: upper fs does not support tmpfile.\n");
+
+ /*
+ * Check if upper/work fs supports trusted.overlay.*
+ * xattr
+ */
+ err = ovl_do_setxattr(ufs->workdir, OVL_XATTR_OPAQUE,
+ "0", 1, 0);
+ if (err) {
+ ufs->noxattr = true;
+ pr_warn("overlayfs: upper fs does not support xattr.\n");
+ } else {
+ vfs_removexattr(ufs->workdir, OVL_XATTR_OPAQUE);
+ }
}
}
path_put(&workpath);
kfree(lowertmp);
- oe->__upperdentry = upperpath.dentry;
+ if (upperpath.dentry) {
+ oe->__upperdentry = upperpath.dentry;
+ oe->impure = ovl_is_impuredir(upperpath.dentry);
+ }
for (i = 0; i < numlower; i++) {
oe->lowerstack[i].dentry = stack[i].dentry;
oe->lowerstack[i].mnt = ufs->lower_mnt[i];
return oe->opaque;
}
+bool ovl_dentry_is_impure(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ return oe->impure;
+}
+
bool ovl_dentry_is_whiteout(struct dentry *dentry)
{
return !dentry->d_inode && ovl_dentry_is_opaque(dentry);
{
struct ovl_fs *ofs = sb->s_fs_info;
- return ofs->config.redirect_dir;
-}
-
-void ovl_clear_redirect_dir(struct super_block *sb)
-{
- struct ovl_fs *ofs = sb->s_fs_info;
-
- ofs->config.redirect_dir = false;
+ return ofs->config.redirect_dir && !ofs->noxattr;
}
const char *ovl_dentry_get_redirect(struct dentry *dentry)
wake_up_locked(&ofs->copyup_wq);
spin_unlock(&ofs->copyup_wq.lock);
}
+
+bool ovl_check_dir_xattr(struct dentry *dentry, const char *name)
+{
+ int res;
+ char val;
+
+ if (!d_is_dir(dentry))
+ return false;
+
+ res = vfs_getxattr(dentry, name, &val, 1);
+ if (res == 1 && val == 'y')
+ return true;
+
+ return false;
+}
+
+int ovl_check_setxattr(struct dentry *dentry, struct dentry *upperdentry,
+ const char *name, const void *value, size_t size,
+ int xerr)
+{
+ int err;
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+
+ if (ofs->noxattr)
+ return xerr;
+
+ err = ovl_do_setxattr(upperdentry, name, value, size, 0);
+
+ if (err == -EOPNOTSUPP) {
+ pr_warn("overlayfs: cannot set %s xattr on upper\n", name);
+ ofs->noxattr = true;
+ return xerr;
+ }
+
+ return err;
+}
+
+int ovl_set_impure(struct dentry *dentry, struct dentry *upperdentry)
+{
+ int err;
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ if (oe->impure)
+ return 0;
+
+ /*
+ * Do not fail when upper doesn't support xattrs.
+ * Upper inodes won't have origin nor redirect xattr anyway.
+ */
+ err = ovl_check_setxattr(dentry, upperdentry, OVL_XATTR_IMPURE,
+ "y", 1, 0);
+ if (!err)
+ oe->impure = true;
+
+ return err;
+}
if (!mmget_not_zero(mm))
goto free;
- flags = write ? FOLL_WRITE : 0;
+ flags = FOLL_FORCE | (write ? FOLL_WRITE : 0);
while (count > 0) {
int this_len = min_t(int, count, PAGE_SIZE);
.flags = _flags, \
}
+#ifdef CONFIG_GPIOLIB
void gpiod_add_lookup_table(struct gpiod_lookup_table *table);
void gpiod_remove_lookup_table(struct gpiod_lookup_table *table);
+#else
+static inline
+void gpiod_add_lookup_table(struct gpiod_lookup_table *table) {}
+static inline
+void gpiod_remove_lookup_table(struct gpiod_lookup_table *table) {}
+#endif
#endif /* __LINUX_GPIO_MACHINE_H */
DMI_PRODUCT_VERSION,
DMI_PRODUCT_SERIAL,
DMI_PRODUCT_UUID,
+ DMI_PRODUCT_FAMILY,
DMI_BOARD_VENDOR,
DMI_BOARD_NAME,
DMI_BOARD_VERSION,
* @PIN_CONFIG_BIAS_PULL_UP: the pin will be pulled up (usually with high
* impedance to VDD). If the argument is != 0 pull-up is enabled,
* if it is 0, pull-up is total, i.e. the pin is connected to VDD.
- * @PIN_CONFIG_BIDIRECTIONAL: the pin will be configured to allow simultaneous
- * input and output operations.
* @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
* collector) which means it is usually wired with other output ports
* which are then pulled up with an external resistor. Setting this
PIN_CONFIG_BIAS_PULL_DOWN,
PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
PIN_CONFIG_BIAS_PULL_UP,
- PIN_CONFIG_BIDIRECTIONAL,
PIN_CONFIG_DRIVE_OPEN_DRAIN,
PIN_CONFIG_DRIVE_OPEN_SOURCE,
PIN_CONFIG_DRIVE_PUSH_PULL,
projects / karo-tx-linux.git / commitdiff