]> git.karo-electronics.de Git - karo-tx-linux.git/commitdiff
net: dsa: Remove hwmon support
authorAndrew Lunn <andrew@lunn.ch>
Fri, 20 Jan 2017 00:37:50 +0000 (01:37 +0100)
committerDavid S. Miller <davem@davemloft.net>
Fri, 20 Jan 2017 19:42:51 +0000 (14:42 -0500)
Only the Marvell mv88e6xxx DSA driver made use of the HWMON support in
DSA. The temperature sensor registers are actually in the embedded
PHYs, and the PHY driver now supports it. So remove all HWMON support
from DSA and drivers.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/mv88e6xxx/chip.c
drivers/net/dsa/mv88e6xxx/mv88e6xxx.h
include/net/dsa.h
net/dsa/Kconfig
net/dsa/Makefile
net/dsa/dsa.c
net/dsa/dsa_priv.h
net/dsa/hwmon.c [deleted file]

index 987b2dbbd35ae81172d9213db08e195f4511db33..c7e08e13bb54e6b67d7ae28e1746d56ca15e3f12 100644 (file)
@@ -2964,154 +2964,6 @@ static void mv88e6xxx_mdio_unregister(struct mv88e6xxx_chip *chip)
                of_node_put(chip->mdio_np);
 }
 
-#ifdef CONFIG_NET_DSA_HWMON
-
-static int mv88e61xx_get_temp(struct dsa_switch *ds, int *temp)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-       u16 val;
-       int ret;
-
-       *temp = 0;
-
-       mutex_lock(&chip->reg_lock);
-
-       ret = mv88e6xxx_phy_write(chip, 0x0, 0x16, 0x6);
-       if (ret < 0)
-               goto error;
-
-       /* Enable temperature sensor */
-       ret = mv88e6xxx_phy_read(chip, 0x0, 0x1a, &val);
-       if (ret < 0)
-               goto error;
-
-       ret = mv88e6xxx_phy_write(chip, 0x0, 0x1a, val | (1 << 5));
-       if (ret < 0)
-               goto error;
-
-       /* Wait for temperature to stabilize */
-       usleep_range(10000, 12000);
-
-       ret = mv88e6xxx_phy_read(chip, 0x0, 0x1a, &val);
-       if (ret < 0)
-               goto error;
-
-       /* Disable temperature sensor */
-       ret = mv88e6xxx_phy_write(chip, 0x0, 0x1a, val & ~(1 << 5));
-       if (ret < 0)
-               goto error;
-
-       *temp = ((val & 0x1f) - 5) * 5;
-
-error:
-       mv88e6xxx_phy_write(chip, 0x0, 0x16, 0x0);
-       mutex_unlock(&chip->reg_lock);
-       return ret;
-}
-
-static int mv88e63xx_get_temp(struct dsa_switch *ds, int *temp)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-       int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
-       u16 val;
-       int ret;
-
-       *temp = 0;
-
-       mutex_lock(&chip->reg_lock);
-       ret = mv88e6xxx_phy_page_read(chip, phy, 6, 27, &val);
-       mutex_unlock(&chip->reg_lock);
-       if (ret < 0)
-               return ret;
-
-       *temp = (val & 0xff) - 25;
-
-       return 0;
-}
-
-static int mv88e6xxx_get_temp(struct dsa_switch *ds, int *temp)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-
-       if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP))
-               return -EOPNOTSUPP;
-
-       if (mv88e6xxx_6320_family(chip) || mv88e6xxx_6352_family(chip))
-               return mv88e63xx_get_temp(ds, temp);
-
-       return mv88e61xx_get_temp(ds, temp);
-}
-
-static int mv88e6xxx_get_temp_limit(struct dsa_switch *ds, int *temp)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-       int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
-       u16 val;
-       int ret;
-
-       if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
-               return -EOPNOTSUPP;
-
-       *temp = 0;
-
-       mutex_lock(&chip->reg_lock);
-       ret = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
-       mutex_unlock(&chip->reg_lock);
-       if (ret < 0)
-               return ret;
-
-       *temp = (((val >> 8) & 0x1f) * 5) - 25;
-
-       return 0;
-}
-
-static int mv88e6xxx_set_temp_limit(struct dsa_switch *ds, int temp)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-       int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
-       u16 val;
-       int err;
-
-       if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
-               return -EOPNOTSUPP;
-
-       mutex_lock(&chip->reg_lock);
-       err = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
-       if (err)
-               goto unlock;
-       temp = clamp_val(DIV_ROUND_CLOSEST(temp, 5) + 5, 0, 0x1f);
-       err = mv88e6xxx_phy_page_write(chip, phy, 6, 26,
-                                      (val & 0xe0ff) | (temp << 8));
-unlock:
-       mutex_unlock(&chip->reg_lock);
-
-       return err;
-}
-
-static int mv88e6xxx_get_temp_alarm(struct dsa_switch *ds, bool *alarm)
-{
-       struct mv88e6xxx_chip *chip = ds->priv;
-       int phy = mv88e6xxx_6320_family(chip) ? 3 : 0;
-       u16 val;
-       int ret;
-
-       if (!mv88e6xxx_has(chip, MV88E6XXX_FLAG_TEMP_LIMIT))
-               return -EOPNOTSUPP;
-
-       *alarm = false;
-
-       mutex_lock(&chip->reg_lock);
-       ret = mv88e6xxx_phy_page_read(chip, phy, 6, 26, &val);
-       mutex_unlock(&chip->reg_lock);
-       if (ret < 0)
-               return ret;
-
-       *alarm = !!(val & 0x40);
-
-       return 0;
-}
-#endif /* CONFIG_NET_DSA_HWMON */
-
 static int mv88e6xxx_get_eeprom_len(struct dsa_switch *ds)
 {
        struct mv88e6xxx_chip *chip = ds->priv;
@@ -4386,12 +4238,6 @@ static const struct dsa_switch_ops mv88e6xxx_switch_ops = {
        .get_sset_count         = mv88e6xxx_get_sset_count,
        .set_eee                = mv88e6xxx_set_eee,
        .get_eee                = mv88e6xxx_get_eee,
-#ifdef CONFIG_NET_DSA_HWMON
-       .get_temp               = mv88e6xxx_get_temp,
-       .get_temp_limit         = mv88e6xxx_get_temp_limit,
-       .set_temp_limit         = mv88e6xxx_set_temp_limit,
-       .get_temp_alarm         = mv88e6xxx_get_temp_alarm,
-#endif
        .get_eeprom_len         = mv88e6xxx_get_eeprom_len,
        .get_eeprom             = mv88e6xxx_get_eeprom,
        .set_eeprom             = mv88e6xxx_set_eeprom,
index 466cfdadb7bd689c96e31cfa52f5b4c50d8f03f1..ce8b43b14e966c8004aacb8ab31886a37c73db6a 100644 (file)
@@ -497,12 +497,6 @@ enum mv88e6xxx_cap {
         */
        MV88E6XXX_CAP_STU,
 
-       /* Internal temperature sensor.
-        * Available from any enabled port's PHY register 26, page 6.
-        */
-       MV88E6XXX_CAP_TEMP,
-       MV88E6XXX_CAP_TEMP_LIMIT,
-
        /* VLAN Table Unit.
         * The VTU is used to program 802.1Q VLANs. See GLOBAL_VTU_OP.
         */
@@ -533,8 +527,6 @@ enum mv88e6xxx_cap {
 #define MV88E6XXX_FLAG_G2_POT          BIT_ULL(MV88E6XXX_CAP_G2_POT)
 
 #define MV88E6XXX_FLAG_STU             BIT_ULL(MV88E6XXX_CAP_STU)
-#define MV88E6XXX_FLAG_TEMP            BIT_ULL(MV88E6XXX_CAP_TEMP)
-#define MV88E6XXX_FLAG_TEMP_LIMIT      BIT_ULL(MV88E6XXX_CAP_TEMP_LIMIT)
 #define MV88E6XXX_FLAG_VTU             BIT_ULL(MV88E6XXX_CAP_VTU)
 
 /* Ingress Rate Limit unit */
@@ -586,7 +578,6 @@ enum mv88e6xxx_cap {
         MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
         MV88E6XXX_FLAG_G2_POT |        \
         MV88E6XXX_FLAG_STU |           \
-        MV88E6XXX_FLAG_TEMP |          \
         MV88E6XXX_FLAG_VTU |           \
         MV88E6XXX_FLAGS_IRL |          \
         MV88E6XXX_FLAGS_MULTI_CHIP |   \
@@ -605,8 +596,6 @@ enum mv88e6xxx_cap {
         MV88E6XXX_FLAG_G2_MGMT_EN_2X | \
         MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
         MV88E6XXX_FLAG_G2_POT |        \
-        MV88E6XXX_FLAG_TEMP |          \
-        MV88E6XXX_FLAG_TEMP_LIMIT |    \
         MV88E6XXX_FLAG_VTU |           \
         MV88E6XXX_FLAGS_IRL |          \
         MV88E6XXX_FLAGS_MULTI_CHIP |   \
@@ -621,7 +610,6 @@ enum mv88e6xxx_cap {
         MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
         MV88E6XXX_FLAG_G2_POT |        \
         MV88E6XXX_FLAG_STU |           \
-        MV88E6XXX_FLAG_TEMP |          \
         MV88E6XXX_FLAG_VTU |           \
         MV88E6XXX_FLAGS_IRL |          \
         MV88E6XXX_FLAGS_MULTI_CHIP |   \
@@ -637,8 +625,6 @@ enum mv88e6xxx_cap {
         MV88E6XXX_FLAG_G2_MGMT_EN_0X | \
         MV88E6XXX_FLAG_G2_POT |        \
         MV88E6XXX_FLAG_STU |           \
-        MV88E6XXX_FLAG_TEMP |          \
-        MV88E6XXX_FLAG_TEMP_LIMIT |    \
         MV88E6XXX_FLAG_VTU |           \
         MV88E6XXX_FLAGS_IRL |          \
         MV88E6XXX_FLAGS_MULTI_CHIP |   \
@@ -651,8 +637,6 @@ struct mv88e6xxx_ops;
        (MV88E6XXX_FLAG_EEE |           \
         MV88E6XXX_FLAG_GLOBAL2 |       \
         MV88E6XXX_FLAG_STU |           \
-        MV88E6XXX_FLAG_TEMP |          \
-        MV88E6XXX_FLAG_TEMP_LIMIT |    \
         MV88E6XXX_FLAG_VTU |           \
         MV88E6XXX_FLAGS_IRL |          \
         MV88E6XXX_FLAGS_MULTI_CHIP |   \
index c72ed7af2a2a822e883551bc8b236368c061b409..9d6cd923c48cfd1b9836faf6007761480cab0c9e 100644 (file)
@@ -307,14 +307,6 @@ struct dsa_switch_ops {
        int     (*get_eee)(struct dsa_switch *ds, int port,
                           struct ethtool_eee *e);
 
-#ifdef CONFIG_NET_DSA_HWMON
-       /* Hardware monitoring */
-       int     (*get_temp)(struct dsa_switch *ds, int *temp);
-       int     (*get_temp_limit)(struct dsa_switch *ds, int *temp);
-       int     (*set_temp_limit)(struct dsa_switch *ds, int temp);
-       int     (*get_temp_alarm)(struct dsa_switch *ds, bool *alarm);
-#endif
-
        /* EEPROM access */
        int     (*get_eeprom_len)(struct dsa_switch *ds);
        int     (*get_eeprom)(struct dsa_switch *ds,
index 39bb5b3a82f266a4c2e22b64e96edd9a8a28a576..9649238eef404095a89d34a006dc0b504bc47038 100644 (file)
@@ -15,17 +15,6 @@ config NET_DSA
 
 if NET_DSA
 
-config NET_DSA_HWMON
-       bool "Distributed Switch Architecture HWMON support"
-       default y
-       depends on HWMON && !(NET_DSA=y && HWMON=m)
-       ---help---
-         Say Y if you want to expose thermal sensor data on switches supported
-         by the Distributed Switch Architecture.
-
-         Some of those switches contain thermal sensors. This data is available
-         via the hwmon sysfs interface and exposes the onboard sensors.
-
 # tagging formats
 config NET_DSA_TAG_BRCM
        bool
index 560b6747c276aa4766c9428191c963d674e72701..a3380ed0e0be56d1cc3a22be1929c63ba9090288 100644 (file)
@@ -1,7 +1,6 @@
 # the core
 obj-$(CONFIG_NET_DSA) += dsa_core.o
 dsa_core-y += dsa.o slave.o dsa2.o
-dsa_core-$(CONFIG_NET_DSA_HWMON) += hwmon.o
 
 # tagging formats
 dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
index 91f96e1bd2ecec1db34ce9d8b56661213eb567ce..77cb78767f1d218e16757893cb9d91a26848fddb 100644 (file)
@@ -316,8 +316,6 @@ static int dsa_switch_setup_one(struct dsa_switch *ds, struct device *parent)
        if (ret)
                return ret;
 
-       dsa_hwmon_register(ds);
-
        return 0;
 }
 
@@ -376,8 +374,6 @@ static void dsa_switch_destroy(struct dsa_switch *ds)
 {
        int port;
 
-       dsa_hwmon_unregister(ds);
-
        /* Destroy network devices for physical switch ports. */
        for (port = 0; port < DSA_MAX_PORTS; port++) {
                if (!(ds->enabled_port_mask & (1 << port)))
index 7e3385ec73f47c663783c8bbe1d581e781074eb2..63ae1484abae4c221f4c1f7b946c5bed65ccdb7b 100644 (file)
@@ -56,15 +56,6 @@ const struct dsa_device_ops *dsa_resolve_tag_protocol(int tag_protocol);
 int dsa_cpu_port_ethtool_setup(struct dsa_switch *ds);
 void dsa_cpu_port_ethtool_restore(struct dsa_switch *ds);
 
-/* hwmon.c */
-#ifdef CONFIG_NET_DSA_HWMON
-void dsa_hwmon_register(struct dsa_switch *ds);
-void dsa_hwmon_unregister(struct dsa_switch *ds);
-#else
-static inline void dsa_hwmon_register(struct dsa_switch *ds) { }
-static inline void dsa_hwmon_unregister(struct dsa_switch *ds) { }
-#endif
-
 /* slave.c */
 extern const struct dsa_device_ops notag_netdev_ops;
 void dsa_slave_mii_bus_init(struct dsa_switch *ds);
diff --git a/net/dsa/hwmon.c b/net/dsa/hwmon.c
deleted file mode 100644 (file)
index 08831a8..0000000
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * net/dsa/hwmon.c - HWMON subsystem support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/ctype.h>
-#include <linux/hwmon.h>
-#include <net/dsa.h>
-
-#include "dsa_priv.h"
-
-static ssize_t temp1_input_show(struct device *dev,
-                               struct device_attribute *attr, char *buf)
-{
-       struct dsa_switch *ds = dev_get_drvdata(dev);
-       int temp, ret;
-
-       ret = ds->ops->get_temp(ds, &temp);
-       if (ret < 0)
-               return ret;
-
-       return sprintf(buf, "%d\n", temp * 1000);
-}
-static DEVICE_ATTR_RO(temp1_input);
-
-static ssize_t temp1_max_show(struct device *dev,
-                             struct device_attribute *attr, char *buf)
-{
-       struct dsa_switch *ds = dev_get_drvdata(dev);
-       int temp, ret;
-
-       ret = ds->ops->get_temp_limit(ds, &temp);
-       if (ret < 0)
-               return ret;
-
-       return sprintf(buf, "%d\n", temp * 1000);
-}
-
-static ssize_t temp1_max_store(struct device *dev,
-                              struct device_attribute *attr, const char *buf,
-                              size_t count)
-{
-       struct dsa_switch *ds = dev_get_drvdata(dev);
-       int temp, ret;
-
-       ret = kstrtoint(buf, 0, &temp);
-       if (ret < 0)
-               return ret;
-
-       ret = ds->ops->set_temp_limit(ds, DIV_ROUND_CLOSEST(temp, 1000));
-       if (ret < 0)
-               return ret;
-
-       return count;
-}
-static DEVICE_ATTR_RW(temp1_max);
-
-static ssize_t temp1_max_alarm_show(struct device *dev,
-                                   struct device_attribute *attr, char *buf)
-{
-       struct dsa_switch *ds = dev_get_drvdata(dev);
-       bool alarm;
-       int ret;
-
-       ret = ds->ops->get_temp_alarm(ds, &alarm);
-       if (ret < 0)
-               return ret;
-
-       return sprintf(buf, "%d\n", alarm);
-}
-static DEVICE_ATTR_RO(temp1_max_alarm);
-
-static struct attribute *dsa_hwmon_attrs[] = {
-       &dev_attr_temp1_input.attr,     /* 0 */
-       &dev_attr_temp1_max.attr,       /* 1 */
-       &dev_attr_temp1_max_alarm.attr, /* 2 */
-       NULL
-};
-
-static umode_t dsa_hwmon_attrs_visible(struct kobject *kobj,
-                                      struct attribute *attr, int index)
-{
-       struct device *dev = container_of(kobj, struct device, kobj);
-       struct dsa_switch *ds = dev_get_drvdata(dev);
-       const struct dsa_switch_ops *ops = ds->ops;
-       umode_t mode = attr->mode;
-
-       if (index == 1) {
-               if (!ops->get_temp_limit)
-                       mode = 0;
-               else if (!ops->set_temp_limit)
-                       mode &= ~S_IWUSR;
-       } else if (index == 2 && !ops->get_temp_alarm) {
-               mode = 0;
-       }
-       return mode;
-}
-
-static const struct attribute_group dsa_hwmon_group = {
-       .attrs = dsa_hwmon_attrs,
-       .is_visible = dsa_hwmon_attrs_visible,
-};
-__ATTRIBUTE_GROUPS(dsa_hwmon);
-
-void dsa_hwmon_register(struct dsa_switch *ds)
-{
-       const char *netname = netdev_name(ds->dst->master_netdev);
-       char hname[IFNAMSIZ + 1];
-       int i, j;
-
-       /* If the switch provides temperature accessors, register with hardware
-        * monitoring subsystem. Treat registration error as non-fatal.
-        */
-       if (!ds->ops->get_temp)
-               return;
-
-       /* Create valid hwmon 'name' attribute */
-       for (i = j = 0; i < IFNAMSIZ && netname[i]; i++) {
-               if (isalnum(netname[i]))
-                       hname[j++] = netname[i];
-       }
-       hname[j] = '\0';
-       scnprintf(ds->hwmon_name, sizeof(ds->hwmon_name), "%s_dsa%d", hname,
-                 ds->index);
-       ds->hwmon_dev = hwmon_device_register_with_groups(NULL, ds->hwmon_name,
-                                                         ds, dsa_hwmon_groups);
-       if (IS_ERR(ds->hwmon_dev)) {
-               pr_warn("DSA: failed to register HWMON subsystem for switch %d\n",
-                       ds->index);
-               ds->hwmon_dev = NULL;
-       } else {
-               pr_info("DSA: registered HWMON subsystem for switch %d\n",
-                       ds->index);
-       }
-}
-
-void dsa_hwmon_unregister(struct dsa_switch *ds)
-{
-       if (ds->hwmon_dev) {
-               hwmon_device_unregister(ds->hwmon_dev);
-               ds->hwmon_dev = NULL;
-       }
-}