help
This enables support for systems based on the Hilscher NetX Soc
-config ARCH_H720X
- bool "Hynix HMS720x-based"
- select ARCH_USES_GETTIMEOFFSET
- select CPU_ARM720T
- select ISA_DMA_API
- help
- This enables support for systems based on the Hynix HMS720x
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
source "arch/arm/mach-gemini/Kconfig"
-source "arch/arm/mach-h720x/Kconfig"
-
source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_GEMINI) += gemini
-machine-$(CONFIG_ARCH_H720X) += h720x
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7201=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_EXT2_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_DEBUG_USER=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MODULES=y
-CONFIG_ARCH_H720X=y
-CONFIG_ARCH_H7202=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,19200"
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_H720X=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB_GADGET=m
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_EXT2_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
+++ /dev/null
-if ARCH_H720X
-
-menu "h720x Implementations"
-
-config ARCH_H7201
- bool "gms30c7201"
- depends on ARCH_H720X
- select CPU_H7201
- select ZONE_DMA
- help
- Say Y here if you are using the Hynix GMS30C7201 Reference Board
-
-config ARCH_H7202
- bool "hms30c7202"
- depends on ARCH_H720X
- select CPU_H7202
- select ZONE_DMA
- help
- Say Y here if you are using the Hynix HMS30C7202 Reference Board
-
-endmenu
-
-config CPU_H7201
- bool
- help
- Select code specific to h7201 variants
-
-config CPU_H7202
- bool
- help
- Select code specific to h7202 variants
-config H7202_SERIAL23
- depends on CPU_H7202
- bool "Use serial ports 2+3"
- help
- Say Y here if you wish to use serial ports 2+3. They share their
- pins with the keyboard matrix controller, so you have to decide.
-
-
-endif
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Common support
-obj-y := common.o
-obj-m :=
-obj-n :=
-obj- :=
-
-# Specific board support
-
-obj-$(CONFIG_ARCH_H7201) += h7201-eval.o
-obj-$(CONFIG_ARCH_H7202) += h7202-eval.o
-obj-$(CONFIG_CPU_H7201) += cpu-h7201.o
-obj-$(CONFIG_CPU_H7202) += cpu-h7202.o
+++ /dev/null
- zreladdr-$(CONFIG_ARCH_H720X) += 0x40008000
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/common.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * common stuff for Hynix h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/sched.h>
-#include <linux/mman.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-#include <mach/irqs.h>
-
-#include <asm/mach/dma.h>
-
-#if 0
-#define IRQDBG(args...) printk(args)
-#else
-#define IRQDBG(args...) do {} while(0)
-#endif
-
-void __init arch_dma_init(dma_t *dma)
-{
-}
-
-/*
- * Return nsecs since last timer reload
- * (timercount * (usecs perjiffie)) / (ticks per jiffie)
- */
-u32 h720x_gettimeoffset(void)
-{
- return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
-}
-
-/*
- * mask Global irq's
- */
-static void mask_global_irq(struct irq_data *d)
-{
- CPU_REG (IRQC_VIRT, IRQC_IER) &= ~(1 << d->irq);
-}
-
-/*
- * unmask Global irq's
- */
-static void unmask_global_irq(struct irq_data *d)
-{
- CPU_REG (IRQC_VIRT, IRQC_IER) |= (1 << d->irq);
-}
-
-
-/*
- * ack GPIO irq's
- * Ack only for edge triggered int's valid
- */
-static void inline ack_gpio_irq(struct irq_data *d)
-{
- u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
- u32 bit = IRQ_TO_BIT(d->irq);
- if ( (CPU_REG (reg_base, GPIO_EDGE) & bit))
- CPU_REG (reg_base, GPIO_CLR) = bit;
-}
-
-/*
- * mask GPIO irq's
- */
-static void inline mask_gpio_irq(struct irq_data *d)
-{
- u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
- u32 bit = IRQ_TO_BIT(d->irq);
- CPU_REG (reg_base, GPIO_MASK) &= ~bit;
-}
-
-/*
- * unmask GPIO irq's
- */
-static void inline unmask_gpio_irq(struct irq_data *d)
-{
- u32 reg_base = GPIO_VIRT(IRQ_TO_REGNO(d->irq));
- u32 bit = IRQ_TO_BIT(d->irq);
- CPU_REG (reg_base, GPIO_MASK) |= bit;
-}
-
-static void
-h720x_gpio_handler(unsigned int mask, unsigned int irq,
- struct irq_desc *desc)
-{
- IRQDBG("%s irq: %d\n", __func__, irq);
- while (mask) {
- if (mask & 1) {
- IRQDBG("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- mask >>= 1;
- }
-}
-
-static void
-h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
- irq = IRQ_CHAINED_GPIOA(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
- h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
- mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
- irq = IRQ_CHAINED_GPIOB(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
- h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
- irq = IRQ_CHAINED_GPIOC(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
- h720x_gpio_handler(mask, irq, desc);
-}
-
-static void
-h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
- irq = IRQ_CHAINED_GPIOD(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
- h720x_gpio_handler(mask, irq, desc);
-}
-
-#ifdef CONFIG_CPU_H7202
-static void
-h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
- irq = IRQ_CHAINED_GPIOE(0);
- IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
- h720x_gpio_handler(mask, irq, desc);
-}
-#endif
-
-static struct irq_chip h720x_global_chip = {
- .irq_ack = mask_global_irq,
- .irq_mask = mask_global_irq,
- .irq_unmask = unmask_global_irq,
-};
-
-static struct irq_chip h720x_gpio_chip = {
- .irq_ack = ack_gpio_irq,
- .irq_mask = mask_gpio_irq,
- .irq_unmask = unmask_gpio_irq,
-};
-
-/*
- * Initialize IRQ's, mask all, enable multiplexed irq's
- */
-void __init h720x_init_irq (void)
-{
- int irq;
-
- /* Mask global irq's */
- CPU_REG (IRQC_VIRT, IRQC_IER) = 0x0;
-
- /* Mask all multiplexed irq's */
- CPU_REG (GPIO_A_VIRT, GPIO_MASK) = 0x0;
- CPU_REG (GPIO_B_VIRT, GPIO_MASK) = 0x0;
- CPU_REG (GPIO_C_VIRT, GPIO_MASK) = 0x0;
- CPU_REG (GPIO_D_VIRT, GPIO_MASK) = 0x0;
-
- /* Initialize global IRQ's, fast path */
- for (irq = 0; irq < NR_GLBL_IRQS; irq++) {
- irq_set_chip_and_handler(irq, &h720x_global_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- /* Initialize multiplexed IRQ's, slow path */
- for (irq = IRQ_CHAINED_GPIOA(0) ; irq <= IRQ_CHAINED_GPIOD(31); irq++) {
- irq_set_chip_and_handler(irq, &h720x_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID );
- }
- irq_set_chained_handler(IRQ_GPIOA, h720x_gpioa_demux_handler);
- irq_set_chained_handler(IRQ_GPIOB, h720x_gpiob_demux_handler);
- irq_set_chained_handler(IRQ_GPIOC, h720x_gpioc_demux_handler);
- irq_set_chained_handler(IRQ_GPIOD, h720x_gpiod_demux_handler);
-
-#ifdef CONFIG_CPU_H7202
- for (irq = IRQ_CHAINED_GPIOE(0) ; irq <= IRQ_CHAINED_GPIOE(31); irq++) {
- irq_set_chip_and_handler(irq, &h720x_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID );
- }
- irq_set_chained_handler(IRQ_GPIOE, h720x_gpioe_demux_handler);
-#endif
-
- /* Enable multiplexed irq's */
- CPU_REG (IRQC_VIRT, IRQC_IER) = IRQ_ENA_MUX;
-}
-
-static struct map_desc h720x_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-/* Initialize io tables */
-void __init h720x_map_io(void)
-{
- iotable_init(h720x_io_desc,ARRAY_SIZE(h720x_io_desc));
-}
-
-void h720x_restart(char mode, const char *cmd)
-{
- CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
-}
-
-static void h720x__idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-static int __init h720x_idle_init(void)
-{
- arm_pm_idle = h720x__idle;
- return 0;
-}
-
-arch_initcall(h720x_idle_init);
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/common.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-extern u32 h720x_gettimeoffset(void);
-extern void __init h720x_init_irq(void);
-extern void __init h720x_map_io(void);
-extern void h720x_restart(char, const char *);
-
-#ifdef CONFIG_ARCH_H7202
-extern void h7202_timer_init(void);
-extern void __init init_hw_h7202(void);
-extern void __init h7202_init_irq(void);
-extern void __init h7202_init_time(void);
-#endif
-
-#ifdef CONFIG_ARCH_H7201
-extern void h7201_timer_init(void);
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/cpu-h7201.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7201
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include "common.h"
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7201_timer_interrupt(int irq, void *dev_id)
-{
- CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
- timer_tick();
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction h7201_timer_irq = {
- .name = "h7201 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = h7201_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7201_timer_init(void)
-{
- arch_gettimeoffset = h720x_gettimeoffset;
-
- CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
- CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
- CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
- CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
- setup_irq(IRQ_TIMER0, &h7201_timer_irq);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/cpu-h7202.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * processor specific stuff for the Hynix h7202
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/types.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <mach/irqs.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include "common.h"
-
-static struct resource h7202ps2_resources[] = {
- [0] = {
- .start = 0x8002c000,
- .end = 0x8002c040,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_PS2,
- .end = IRQ_PS2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h7202ps2_device = {
- .name = "h7202ps2",
- .id = -1,
- .num_resources = ARRAY_SIZE(h7202ps2_resources),
- .resource = h7202ps2_resources,
-};
-
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .membase = (void*)SERIAL0_VIRT,
- .mapbase = SERIAL0_BASE,
- .irq = IRQ_UART0,
- .uartclk = 2*1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .membase = (void*)SERIAL1_VIRT,
- .mapbase = SERIAL1_BASE,
- .irq = IRQ_UART1,
- .uartclk = 2*1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
-#ifdef CONFIG_H7202_SERIAL23
- {
- .membase = (void*)SERIAL2_VIRT,
- .mapbase = SERIAL2_BASE,
- .irq = IRQ_UART2,
- .uartclk = 2*1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
- {
- .membase = (void*)SERIAL3_VIRT,
- .mapbase = SERIAL3_BASE,
- .irq = IRQ_UART3,
- .uartclk = 2*1843200,
- .regshift = 2,
- .iotype = UPIO_MEM,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- },
-#endif
- { },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
-static struct platform_device *devices[] __initdata = {
- &h7202ps2_device,
- &serial_device,
-};
-
-/* Although we have two interrupt lines for the timers, we only have one
- * status register which clears all pending timer interrupts on reading. So
- * we have to handle all timer interrupts in one place.
- */
-static void
-h7202_timerx_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = CPU_REG (TIMER_VIRT, TIMER_TOPSTAT);
-
- if ( mask & TSTAT_T0INT ) {
- timer_tick();
- if( mask == TSTAT_T0INT )
- return;
- }
-
- mask >>= 1;
- irq = IRQ_TIMER1;
- while (mask) {
- if (mask & 1)
- generic_handle_irq(irq);
- irq++;
- mask >>= 1;
- }
-}
-
-/*
- * Timer interrupt handler
- */
-static irqreturn_t
-h7202_timer_interrupt(int irq, void *dev_id)
-{
- h7202_timerx_demux_handler(0, NULL);
- return IRQ_HANDLED;
-}
-
-/*
- * mask multiplexed timer IRQs
- */
-static void inline __mask_timerx_irq(unsigned int irq)
-{
- unsigned int bit;
- bit = 2 << ((irq == IRQ_TIMER64B) ? 4 : (irq - IRQ_TIMER1));
- CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) &= ~bit;
-}
-
-static void inline mask_timerx_irq(struct irq_data *d)
-{
- __mask_timerx_irq(d->irq);
-}
-
-/*
- * unmask multiplexed timer IRQs
- */
-static void inline unmask_timerx_irq(struct irq_data *d)
-{
- unsigned int bit;
- bit = 2 << ((d->irq == IRQ_TIMER64B) ? 4 : (d->irq - IRQ_TIMER1));
- CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) |= bit;
-}
-
-static struct irq_chip h7202_timerx_chip = {
- .irq_ack = mask_timerx_irq,
- .irq_mask = mask_timerx_irq,
- .irq_unmask = unmask_timerx_irq,
-};
-
-static struct irqaction h7202_timer_irq = {
- .name = "h7202 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = h7202_timer_interrupt,
-};
-
-/*
- * Setup TIMER0 as system timer
- */
-void __init h7202_timer_init(void)
-{
- arch_gettimeoffset = h720x_gettimeoffset;
-
- CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
- CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
- CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
- CPU_REG (TIMER_VIRT, TIMER_TOPCTRL) = ENABLE_TM0_INTR | TIMER_ENABLE_BIT;
-
- setup_irq(IRQ_TIMER0, &h7202_timer_irq);
-}
-
-void __init h7202_init_irq (void)
-{
- int irq;
-
- CPU_REG (GPIO_E_VIRT, GPIO_MASK) = 0x0;
-
- for (irq = IRQ_TIMER1;
- irq < IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS); irq++) {
- __mask_timerx_irq(irq);
- irq_set_chip_and_handler(irq, &h7202_timerx_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID );
- }
- irq_set_chained_handler(IRQ_TIMERX, h7202_timerx_demux_handler);
-
- h720x_init_irq();
-}
-
-void __init init_hw_h7202(void)
-{
- /* Enable clocks */
- CPU_REG (PMU_BASE, PMU_PLL_CTRL) |= PLL_2_EN | PLL_1_EN | PLL_3_MUTE;
-
- CPU_REG (SERIAL0_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
- CPU_REG (SERIAL1_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
-#ifdef CONFIG_H7202_SERIAL23
- CPU_REG (SERIAL2_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
- CPU_REG (SERIAL3_VIRT, SERIAL_ENABLE) = SERIAL_ENABLE_EN;
- CPU_IO (GPIO_AMULSEL) = AMULSEL_USIN2 | AMULSEL_USOUT2 |
- AMULSEL_USIN3 | AMULSEL_USOUT3;
-#endif
- (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/h7201-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix GMS30C7201 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-MACHINE_START(H7201, "Hynix GMS30C7201")
- /* Maintainer: Robert Schwebel, Pengutronix */
- .atag_offset = 0x1000,
- .map_io = h720x_map_io,
- .init_irq = h720x_init_irq,
- .init_time = h7201_timer_init,
- .dma_zone_size = SZ_256M,
- .restart = h720x_restart,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-h720x/h7202-eval.c
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * Architecture specific stuff for Hynix HMS30C7202 development board
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <asm/page.h>
-#include <asm/mach/arch.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-static struct resource cirrus_resources[] = {
- [0] = {
- .start = ETH0_PHYS + 0x300,
- .end = ETH0_PHYS + 0x300 + 0x10,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CHAINED_GPIOB(8),
- .end = IRQ_CHAINED_GPIOB(8),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cirrus_device = {
- .name = "cirrus-cs89x0",
- .id = -1,
- .num_resources = ARRAY_SIZE(cirrus_resources),
- .resource = cirrus_resources,
-};
-
-static struct platform_device *devices[] __initdata = {
- &cirrus_device,
-};
-
-/*
- * Hardware init. This is called early in initcalls
- * Place pin inits here. So you avoid adding ugly
- * #ifdef stuff to common drivers.
- * Use this only, if your bootloader is not able
- * to initialize the pins proper.
- */
-static void __init init_eval_h7202(void)
-{
- init_hw_h7202();
- (void) platform_add_devices(devices, ARRAY_SIZE(devices));
-
- /* Enable interrupt on portb bit 8 (ethernet) */
- CPU_REG (GPIO_B_VIRT, GPIO_POL) &= ~(1 << 8);
- CPU_REG (GPIO_B_VIRT, GPIO_EN) |= (1 << 8);
-}
-
-MACHINE_START(H7202, "Hynix HMS30C7202")
- /* Maintainer: Robert Schwebel, Pengutronix */
- .atag_offset = 0x100,
- .map_io = h720x_map_io,
- .init_irq = h7202_init_irq,
- .init_time = h7202_timer_init,
- .init_machine = init_eval_h7202,
- .dma_zone_size = SZ_256M,
- .restart = h720x_restart,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/boards.h
- *
- * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the board specific defines for various devices
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
-#error Do not include this file directly. Include asm/hardware.h instead !
-#endif
-
-/* Hynix H7202 developer board specific device defines */
-#ifdef CONFIG_ARCH_H7202
-
-/* FLASH */
-#define H720X_FLASH_VIRT 0xd0000000
-#define H720X_FLASH_PHYS 0x00000000
-#define H720X_FLASH_SIZE 0x02000000
-
-/* onboard LAN controller */
-# define ETH0_PHYS 0x08000000
-
-/* Touch screen defines */
-/* GPIO Port */
-#define PEN_GPIO GPIO_B_VIRT
-/* Bitmask for pen down interrupt */
-#define PEN_INT_BIT (1<<7)
-/* Bitmask for pen up interrupt */
-#define PEN_ENA_BIT (1<<6)
-/* pen up interrupt */
-#define IRQ_PEN IRQ_MUX_GPIOB(7)
-
-#endif
-
-/* Hynix H7201 developer board specific device defines */
-#if defined (CONFIG_ARCH_H7201)
-/* ROM DISK SPACE */
-#define ROM_DISK_BASE 0xc1800000
-#define ROM_DISK_START 0x41800000
-#define ROM_DISK_SIZE 0x00700000
-
-/* SRAM DISK SPACE */
-#define SRAM_DISK_BASE 0xf1000000
-#define SRAM_DISK_START 0x04000000
-#define SRAM_DISK_SIZE 0x00400000
-#endif
-
+++ /dev/null
-/* arch/arm/mach-h720x/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <mach/hardware.h>
-
- .equ io_virt, IO_VIRT
- .equ io_phys, IO_PHYS
-
- .macro addruart, rp, rv, tmp
- mov \rp, #0x00020000 @ UART1
- add \rv, \rp, #io_virt @ virtual address
- add \rp, \rp, #io_phys @ physical base address
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x0] @ UARTDR
-
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
- bne 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #0x18] @ UARTFLG
- tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
- bne 1001b
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hynix HMS720x based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
- @ we could use the id register on H7202, but this is not
- @ properly updated when we come back from asm_do_irq
- @ without a previous return from interrupt
- @ (see loops below in irq_svc, irq_usr)
- @ We see unmasked pending ints only, as the masked pending ints
- @ are not visible here
-
- mov \base, #0xf0000000 @ base register
- orr \base, \base, #0x24000 @ irqbase
- ldr \irqstat, [\base, #0x04] @ get interrupt status
-#if defined (CONFIG_CPU_H7201)
- ldr \tmp, =0x001fffff
-#else
- mvn \tmp, #0xc0000000
-#endif
- and \irqstat, \irqstat, \tmp @ mask out unused ints
- mov \irqnr, #0
-
- mov \tmp, #0xff00
- orr \tmp, \tmp, #0xff
- tst \irqstat, \tmp
- addeq \irqnr, \irqnr, #16
- moveq \irqstat, \irqstat, lsr #16
- tst \irqstat, #255
- addeq \irqnr, \irqnr, #8
- moveq \irqstat, \irqstat, lsr #8
- tst \irqstat, #15
- addeq \irqnr, \irqnr, #4
- moveq \irqstat, \irqstat, lsr #4
- tst \irqstat, #3
- addeq \irqnr, \irqnr, #2
- moveq \irqstat, \irqstat, lsr #2
- tst \irqstat, #1
- addeq \irqnr, \irqnr, #1
- moveq \irqstat, \irqstat, lsr #1
- tst \irqstat, #1 @ bit 0 should be set
- .endm
-
-#else
-#error hynix processor selection missmatch
-#endif
-
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/h7201-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_VIRT (IO_VIRT + 0x50100)
-#define SERIAL3_VIRT (IO_VIRT + 0x50200)
-
-/*
- * PCMCIA
- */
-#define PCMCIA0_ATT_BASE 0xe5000000
-#define PCMCIA0_ATT_SIZE 0x00200000
-#define PCMCIA0_ATT_START 0x20000000
-#define PCMCIA0_MEM_BASE 0xe5200000
-#define PCMCIA0_MEM_SIZE 0x00200000
-#define PCMCIA0_MEM_START 0x24000000
-#define PCMCIA0_IO_BASE 0xe5400000
-#define PCMCIA0_IO_SIZE 0x00200000
-#define PCMCIA0_IO_START 0x28000000
-
-#define PCMCIA1_ATT_BASE 0xe5600000
-#define PCMCIA1_ATT_SIZE 0x00200000
-#define PCMCIA1_ATT_START 0x30000000
-#define PCMCIA1_MEM_BASE 0xe5800000
-#define PCMCIA1_MEM_SIZE 0x00200000
-#define PCMCIA1_MEM_START 0x34000000
-#define PCMCIA1_IO_BASE 0xe5a00000
-#define PCMCIA1_IO_SIZE 0x00200000
-#define PCMCIA1_IO_START 0x38000000
-
-#define PRIME3C_BASE 0xf0050000
-#define PRIME3C_SIZE 0x00001000
-#define PRIME3C_START 0x10000000
-
-/* VGA Controller */
-#define VGA_RAMBASE 0x50
-#define VGA_TIMING0 0x60
-#define VGA_TIMING1 0x64
-#define VGA_TIMING2 0x68
-#define VGA_TIMING3 0x6c
-
-#define LCD_CTRL_VGA_ENABLE 0x00000100
-#define LCD_CTRL_VGA_BPP_MASK 0x00000600
-#define LCD_CTRL_VGA_4BPP 0x00000000
-#define LCD_CTRL_VGA_8BPP 0x00000200
-#define LCD_CTRL_VGA_16BPP 0x00000300
-#define LCD_CTRL_SHARE_DMA 0x00000800
-#define LCD_CTRL_VDE 0x00100000
-#define LCD_CTRL_LPE 0x00400000 /* LCD Power enable */
-#define LCD_CTRL_BLE 0x00800000 /* LCD backlight enable */
-
-#define VGA_PALETTE_BASE (IO_VIRT + 0x10800)
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/h7202-regs.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2004 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#define SERIAL2_OFS 0x2d000
-#define SERIAL2_BASE (IO_PHYS + SERIAL2_OFS)
-#define SERIAL2_VIRT (IO_VIRT + SERIAL2_OFS)
-#define SERIAL3_OFS 0x2e000
-#define SERIAL3_BASE (IO_PHYS + SERIAL3_OFS)
-#define SERIAL3_VIRT (IO_VIRT + SERIAL3_OFS)
-
-/* Matrix Keyboard Controller */
-#define KBD_VIRT (IO_VIRT + 0x22000)
-#define KBD_KBCR 0x00
-#define KBD_KBSC 0x04
-#define KBD_KBTR 0x08
-#define KBD_KBVR0 0x0C
-#define KBD_KBVR1 0x10
-#define KBD_KBSR 0x18
-
-#define KBD_KBCR_SCANENABLE (1 << 7)
-#define KBD_KBCR_NPOWERDOWN (1 << 2)
-#define KBD_KBCR_CLKSEL_MASK (3)
-#define KBD_KBCR_CLKSEL_PCLK2 0x0
-#define KBD_KBCR_CLKSEL_PCLK128 0x1
-#define KBD_KBCR_CLKSEL_PCLK256 0x2
-#define KBD_KBCR_CLKSEL_PCLK512 0x3
-
-#define KBD_KBSR_INTR (1 << 0)
-#define KBD_KBSR_WAKEUP (1 << 1)
-
-/* USB device controller */
-
-#define USBD_BASE (IO_VIRT + 0x12000)
-#define USBD_LENGTH 0x3C
-
-#define USBD_GCTRL 0x00
-#define USBD_EPCTRL 0x04
-#define USBD_INTMASK 0x08
-#define USBD_INTSTAT 0x0C
-#define USBD_PWR 0x10
-#define USBD_DMARXTX 0x14
-#define USBD_DEVID 0x18
-#define USBD_DEVCLASS 0x1C
-#define USBD_INTCLASS 0x20
-#define USBD_SETUP0 0x24
-#define USBD_SETUP1 0x28
-#define USBD_ENDP0RD 0x2C
-#define USBD_ENDP0WT 0x30
-#define USBD_ENDP1RD 0x34
-#define USBD_ENDP2WT 0x38
-
-/* PS/2 port */
-#define PSDATA 0x00
-#define PSSTAT 0x04
-#define PSSTAT_TXEMPTY (1<<0)
-#define PSSTAT_TXBUSY (1<<1)
-#define PSSTAT_RXFULL (1<<2)
-#define PSSTAT_RXBUSY (1<<3)
-#define PSSTAT_CLKIN (1<<4)
-#define PSSTAT_DATAIN (1<<5)
-#define PSSTAT_PARITY (1<<6)
-
-#define PSCONF 0x08
-#define PSCONF_ENABLE (1<<0)
-#define PSCONF_TXINTEN (1<<2)
-#define PSCONF_RXINTEN (1<<3)
-#define PSCONF_FORCECLKLOW (1<<4)
-#define PSCONF_FORCEDATLOW (1<<5)
-#define PSCONF_LCE (1<<6)
-
-#define PSINTR 0x0C
-#define PSINTR_TXINT (1<<0)
-#define PSINTR_RXINT (1<<1)
-#define PSINTR_PAR (1<<2)
-#define PSINTR_RXTO (1<<3)
-#define PSINTR_TXTO (1<<4)
-
-#define PSTDLO 0x10 /* clk low before start transmission */
-#define PSTPRI 0x14 /* PRI clock */
-#define PSTXMT 0x18 /* maximum transmission time */
-#define PSTREC 0x20 /* maximum receive time */
-#define PSPWDN 0x3c
-
-/* ADC converter */
-#define ADC_BASE (IO_VIRT + 0x29000)
-#define ADC_CR 0x00
-#define ADC_TSCTRL 0x04
-#define ADC_BT_CTRL 0x08
-#define ADC_MC_CTRL 0x0C
-#define ADC_STATUS 0x10
-
-/* ADC control register bits */
-#define ADC_CR_PW_CTRL 0x80
-#define ADC_CR_DIRECTC 0x04
-#define ADC_CR_CONTIME_NO 0x00
-#define ADC_CR_CONTIME_2 0x04
-#define ADC_CR_CONTIME_4 0x08
-#define ADC_CR_CONTIME_ADE 0x0c
-#define ADC_CR_LONGCALTIME 0x01
-
-/* ADC touch panel register bits */
-#define ADC_TSCTRL_ENABLE 0x80
-#define ADC_TSCTRL_INTR 0x40
-#define ADC_TSCTRL_SWBYPSS 0x20
-#define ADC_TSCTRL_SWINVT 0x10
-#define ADC_TSCTRL_S400 0x03
-#define ADC_TSCTRL_S200 0x02
-#define ADC_TSCTRL_S100 0x01
-#define ADC_TSCTRL_S50 0x00
-
-/* ADC Interrupt Status Register bits */
-#define ADC_STATUS_TS_BIT 0x80
-#define ADC_STATUS_MBT_BIT 0x40
-#define ADC_STATUS_BBT_BIT 0x20
-#define ADC_STATUS_MIC_BIT 0x10
-
-/* Touch data registers */
-#define ADC_TS_X0X1 0x30
-#define ADC_TS_X2X3 0x34
-#define ADC_TS_Y0Y1 0x38
-#define ADC_TS_Y2Y3 0x3c
-#define ADC_TS_X4X5 0x40
-#define ADC_TS_X6X7 0x44
-#define ADC_TS_Y4Y5 0x48
-#define ADC_TS_Y6Y7 0x50
-
-/* battery data */
-#define ADC_MB_DATA 0x54
-#define ADC_BB_DATA 0x58
-
-/* Sound data register */
-#define ADC_SD_DAT0 0x60
-#define ADC_SD_DAT1 0x64
-#define ADC_SD_DAT2 0x68
-#define ADC_SD_DAT3 0x6c
-#define ADC_SD_DAT4 0x70
-#define ADC_SD_DAT5 0x74
-#define ADC_SD_DAT6 0x78
-#define ADC_SD_DAT7 0x7c
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/hardware.h
- *
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- *
- * This file contains the hardware definitions of the h720x processors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Do not add implementations specific defines here. This files contains
- * only defines of the onchip peripherals. Add those defines to boards.h,
- * which is included by this file.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#define IOCLK (3686400L)
-
-/* Onchip peripherals */
-
-#define IO_VIRT 0xf0000000 /* IO peripherals */
-#define IO_PHYS 0x80000000
-#define IO_SIZE 0x00050000
-
-#ifdef CONFIG_CPU_H7202
-#include "h7202-regs.h"
-#elif defined CONFIG_CPU_H7201
-#include "h7201-regs.h"
-#else
-#error machine definition mismatch
-#endif
-
-/* Macro to access the CPU IO */
-#define CPU_IO(x) (*(volatile u32*)(x))
-
-/* Macro to access general purpose regs (base, offset) */
-#define CPU_REG(x,y) CPU_IO(x+y)
-
-/* Macro to access irq related regs */
-#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
-
-/* CPU registers */
-/* general purpose I/O */
-#define GPIO_VIRT(x) (IO_VIRT + 0x23000 + ((x)<<5))
-#define GPIO_A_VIRT (GPIO_VIRT(0))
-#define GPIO_B_VIRT (GPIO_VIRT(1))
-#define GPIO_C_VIRT (GPIO_VIRT(2))
-#define GPIO_D_VIRT (GPIO_VIRT(3))
-#define GPIO_E_VIRT (GPIO_VIRT(4))
-#define GPIO_AMULSEL (GPIO_VIRT(0) + 0xA4)
-
-#define AMULSEL_USIN2 (1<<5)
-#define AMULSEL_USOUT2 (1<<6)
-#define AMULSEL_USIN3 (1<<13)
-#define AMULSEL_USOUT3 (1<<14)
-#define AMULSEL_IRDIN (1<<15)
-#define AMULSEL_IRDOUT (1<<7)
-
-/* Register offsets general purpose I/O */
-#define GPIO_DATA 0x00
-#define GPIO_DIR 0x04
-#define GPIO_MASK 0x08
-#define GPIO_STAT 0x0C
-#define GPIO_EDGE 0x10
-#define GPIO_CLR 0x14
-#define GPIO_POL 0x18
-#define GPIO_EN 0x1C
-
-/*interrupt controller */
-#define IRQC_VIRT (IO_VIRT + 0x24000)
-/* register offset interrupt controller */
-#define IRQC_IER 0x00
-#define IRQC_ISR 0x04
-
-/* timer unit */
-#define TIMER_VIRT (IO_VIRT + 0x25000)
-/* Register offsets timer unit */
-#define TM0_PERIOD 0x00
-#define TM0_COUNT 0x08
-#define TM0_CTRL 0x10
-#define TM1_PERIOD 0x20
-#define TM1_COUNT 0x28
-#define TM1_CTRL 0x30
-#define TM2_PERIOD 0x40
-#define TM2_COUNT 0x48
-#define TM2_CTRL 0x50
-#define TIMER_TOPCTRL 0x60
-#define TIMER_TOPSTAT 0x64
-#define T64_COUNTL 0x80
-#define T64_COUNTH 0x84
-#define T64_CTRL 0x88
-#define T64_BASEL 0x94
-#define T64_BASEH 0x98
-/* Bitmaks timer unit TOPSTAT reg */
-#define TSTAT_T0INT 0x1
-#define TSTAT_T1INT 0x2
-#define TSTAT_T2INT 0x4
-#define TSTAT_T3INT 0x8
-/* Bit description of TMx_CTRL register */
-#define TM_START 0x1
-#define TM_REPEAT 0x2
-#define TM_RESET 0x4
-/* Bit description of TIMER_CTRL register */
-#define ENABLE_TM0_INTR 0x1
-#define ENABLE_TM1_INTR 0x2
-#define ENABLE_TM2_INTR 0x4
-#define TIMER_ENABLE_BIT 0x8
-#define ENABLE_TIMER64 0x10
-#define ENABLE_TIMER64_INT 0x20
-
-/* PMU & PLL */
-#define PMU_BASE (IO_VIRT + 0x1000)
-#define PMU_MODE 0x00
-#define PMU_STAT 0x20
-#define PMU_PLL_CTRL 0x28
-
-/* PMU Mode bits */
-#define PMU_MODE_SLOW 0x00
-#define PMU_MODE_RUN 0x01
-#define PMU_MODE_IDLE 0x02
-#define PMU_MODE_SLEEP 0x03
-#define PMU_MODE_INIT 0x04
-#define PMU_MODE_DEEPSLEEP 0x07
-#define PMU_MODE_WAKEUP 0x08
-
-/* PMU ... */
-#define PLL_2_EN 0x8000
-#define PLL_1_EN 0x4000
-#define PLL_3_MUTE 0x0080
-
-/* Control bits for PMU/ PLL */
-#define PMU_WARMRESET 0x00010000
-#define PLL_CTRL_MASK23 0x000080ff
-
-/* LCD Controller */
-#define LCD_BASE (IO_VIRT + 0x10000)
-#define LCD_CTRL 0x00
-#define LCD_STATUS 0x04
-#define LCD_STATUS_M 0x08
-#define LCD_INTERRUPT 0x0C
-#define LCD_DBAR 0x10
-#define LCD_DCAR 0x14
-#define LCD_TIMING0 0x20
-#define LCD_TIMING1 0x24
-#define LCD_TIMING2 0x28
-#define LCD_TEST 0x40
-
-/* LCD Control Bits */
-#define LCD_CTRL_LCD_ENABLE 0x00000001
-/* Bits per pixel */
-#define LCD_CTRL_LCD_BPP_MASK 0x00000006
-#define LCD_CTRL_LCD_4BPP 0x00000000
-#define LCD_CTRL_LCD_8BPP 0x00000002
-#define LCD_CTRL_LCD_16BPP 0x00000004
-#define LCD_CTRL_LCD_BW 0x00000008
-#define LCD_CTRL_LCD_TFT 0x00000010
-#define LCD_CTRL_BGR 0x00001000
-#define LCD_CTRL_LCD_VCOMP 0x00080000
-#define LCD_CTRL_LCD_MONO8 0x00200000
-#define LCD_CTRL_LCD_PWR 0x00400000
-#define LCD_CTRL_LCD_BLE 0x00800000
-#define LCD_CTRL_LDBUSEN 0x01000000
-
-/* Palette */
-#define LCD_PALETTE_BASE (IO_VIRT + 0x10400)
-
-/* Serial ports */
-#define SERIAL0_OFS 0x20000
-#define SERIAL0_VIRT (IO_VIRT + SERIAL0_OFS)
-#define SERIAL0_BASE (IO_PHYS + SERIAL0_OFS)
-
-#define SERIAL1_OFS 0x21000
-#define SERIAL1_VIRT (IO_VIRT + SERIAL1_OFS)
-#define SERIAL1_BASE (IO_PHYS + SERIAL1_OFS)
-
-#define SERIAL_ENABLE 0x30
-#define SERIAL_ENABLE_EN (1<<0)
-
-/* General defines to pacify gcc */
-
-#define __ASM_ARCH_HARDWARE_INCMACH_H
-#include "boards.h"
-#undef __ASM_ARCH_HARDWARE_INCMACH_H
-
-#endif /* __ASM_ARCH_HARDWARE_H */
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/irqs.h
- *
- * Copyright (C) 2000 Jungjun Kim
- * (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
- * (C) 2003 Thomas Gleixner <tglx@linutronix.de>
- *
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#if defined (CONFIG_CPU_H7201)
-
-#define IRQ_PMU 0 /* 0x000001 */
-#define IRQ_DMA 1 /* 0x000002 */
-#define IRQ_LCD 2 /* 0x000004 */
-#define IRQ_VGA 3 /* 0x000008 */
-#define IRQ_PCMCIA1 4 /* 0x000010 */
-#define IRQ_PCMCIA2 5 /* 0x000020 */
-#define IRQ_AFE 6 /* 0x000040 */
-#define IRQ_AIC 7 /* 0x000080 */
-#define IRQ_KEYBOARD 8 /* 0x000100 */
-#define IRQ_TIMER0 9 /* 0x000200 */
-#define IRQ_RTC 10 /* 0x000400 */
-#define IRQ_SOUND 11 /* 0x000800 */
-#define IRQ_USB 12 /* 0x001000 */
-#define IRQ_IrDA 13 /* 0x002000 */
-#define IRQ_UART0 14 /* 0x004000 */
-#define IRQ_UART1 15 /* 0x008000 */
-#define IRQ_SPI 16 /* 0x010000 */
-#define IRQ_GPIOA 17 /* 0x020000 */
-#define IRQ_GPIOB 18 /* 0x040000 */
-#define IRQ_GPIOC 19 /* 0x080000 */
-#define IRQ_GPIOD 20 /* 0x100000 */
-#define IRQ_CommRX 21 /* 0x200000 */
-#define IRQ_CommTX 22 /* 0x400000 */
-#define IRQ_Soft 23 /* 0x800000 */
-
-#define NR_GLBL_IRQS 24
-
-#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
-#define NR_IRQS IRQ_CHAINED_GPIOD(32)
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
- | (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
-
-
-#elif defined (CONFIG_CPU_H7202)
-
-#define IRQ_PMU 0 /* 0x00000001 */
-#define IRQ_DMA 1 /* 0x00000002 */
-#define IRQ_LCD 2 /* 0x00000004 */
-#define IRQ_SOUND 3 /* 0x00000008 */
-#define IRQ_I2S 4 /* 0x00000010 */
-#define IRQ_USB 5 /* 0x00000020 */
-#define IRQ_MMC 6 /* 0x00000040 */
-#define IRQ_RTC 7 /* 0x00000080 */
-#define IRQ_UART0 8 /* 0x00000100 */
-#define IRQ_UART1 9 /* 0x00000200 */
-#define IRQ_UART2 10 /* 0x00000400 */
-#define IRQ_UART3 11 /* 0x00000800 */
-#define IRQ_KBD 12 /* 0x00001000 */
-#define IRQ_PS2 13 /* 0x00002000 */
-#define IRQ_AIC 14 /* 0x00004000 */
-#define IRQ_TIMER0 15 /* 0x00008000 */
-#define IRQ_TIMERX 16 /* 0x00010000 */
-#define IRQ_WDT 17 /* 0x00020000 */
-#define IRQ_CAN0 18 /* 0x00040000 */
-#define IRQ_CAN1 19 /* 0x00080000 */
-#define IRQ_EXT0 20 /* 0x00100000 */
-#define IRQ_EXT1 21 /* 0x00200000 */
-#define IRQ_GPIOA 22 /* 0x00400000 */
-#define IRQ_GPIOB 23 /* 0x00800000 */
-#define IRQ_GPIOC 24 /* 0x01000000 */
-#define IRQ_GPIOD 25 /* 0x02000000 */
-#define IRQ_GPIOE 26 /* 0x04000000 */
-#define IRQ_COMMRX 27 /* 0x08000000 */
-#define IRQ_COMMTX 28 /* 0x10000000 */
-#define IRQ_SMC 29 /* 0x20000000 */
-#define IRQ_Soft 30 /* 0x40000000 */
-#define IRQ_RESERVED1 31 /* 0x80000000 */
-#define NR_GLBL_IRQS 32
-
-#define NR_TIMERX_IRQS 3
-
-#define IRQ_CHAINED_GPIOA(x) (NR_GLBL_IRQS + x)
-#define IRQ_CHAINED_GPIOB(x) (IRQ_CHAINED_GPIOA(32) + x)
-#define IRQ_CHAINED_GPIOC(x) (IRQ_CHAINED_GPIOB(32) + x)
-#define IRQ_CHAINED_GPIOD(x) (IRQ_CHAINED_GPIOC(32) + x)
-#define IRQ_CHAINED_GPIOE(x) (IRQ_CHAINED_GPIOD(32) + x)
-#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
-#define IRQ_TIMER1 (IRQ_CHAINED_TIMERX(0))
-#define IRQ_TIMER2 (IRQ_CHAINED_TIMERX(1))
-#define IRQ_TIMER64B (IRQ_CHAINED_TIMERX(2))
-
-#define NR_IRQS (IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
-
-/* Enable mask for multiplexed interrupts */
-#define IRQ_ENA_MUX (1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
- (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
- (1<<IRQ_TIMERX)
-
-#else
-#error cpu definition mismatch
-#endif
-
-/* decode irq number to register number */
-#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
-#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/isa-dma.h
- *
- * Architecture DMA routes
- *
- * Copyright (C) 1997.1998 Russell King
- */
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-#if defined (CONFIG_CPU_H7201)
-#define MAX_DMA_CHANNELS 3
-#elif defined (CONFIG_CPU_H7202)
-#define MAX_DMA_CHANNELS 4
-#else
-#error processor definition missmatch
-#endif
-
-#endif /* __ASM_ARCH_DMA_H */
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/timex.h
- * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_TIMEX
-#define __ASM_ARCH_TIMEX
-
-#define CLOCK_TICK_RATE 3686400
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-h720x/include/mach/uncompress.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <mach/hardware.h>
-
-#define LSR 0x14
-#define TEMPTY 0x40
-
-static inline void putc(int c)
-{
- volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
-
- /* wait until transmit buffer is empty */
- while((p[LSR] & TEMPTY) == 0x0)
- barrier();
-
- /* write next character */
- *p = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#endif
projects / karo-tx-linux.git / commitdiff