pwm: atmel-hlcdc: Implement the suspend/resume hooks

Implement the suspend/resume hooks to make sure the PWM device is
restored to a correct state after a suspend.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index bcb6d946131d14b7041da98de32bcba420f66c9a..54c6633d9b5d0576f09ee8be54a1b72324171e73 100644 (file)
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -191,6 +191,40 @@ static const struct atmel_hlcdc_pwm_errata atmel_hlcdc_pwm_sama5d3_errata = {
        .div1_clk_erratum = true,
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int atmel_hlcdc_pwm_suspend(struct device *dev)
+{
+       struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+
+       /* Keep the periph clock enabled if the PWM is still running. */
+       if (pwm_is_enabled(&chip->chip.pwms[0]))
+               clk_disable_unprepare(chip->hlcdc->periph_clk);
+
+       return 0;
+}
+
+static int atmel_hlcdc_pwm_resume(struct device *dev)
+{
+       struct atmel_hlcdc_pwm *chip = dev_get_drvdata(dev);
+       struct pwm_state state;
+       int ret;
+
+       pwm_get_state(&chip->chip.pwms[0], &state);
+
+       /* Re-enable the periph clock it was stopped during suspend. */
+       if (!state.enabled) {
+               ret = clk_prepare_enable(chip->hlcdc->periph_clk);
+               if (ret)
+                       return ret;
+       }
+
+       return atmel_hlcdc_pwm_apply(&chip->chip, &chip->chip.pwms[0], &state);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_hlcdc_pwm_pm_ops,
+                        atmel_hlcdc_pwm_suspend, atmel_hlcdc_pwm_resume);
+
 static const struct of_device_id atmel_hlcdc_dt_ids[] = {
        {
                .compatible = "atmel,at91sam9n12-hlcdc",
@@ -280,6 +314,7 @@ static struct platform_driver atmel_hlcdc_pwm_driver = {
        .driver = {
                .name = "atmel-hlcdc-pwm",
                .of_match_table = atmel_hlcdc_pwm_dt_ids,
+               .pm = &atmel_hlcdc_pwm_pm_ops,
        },
        .probe = atmel_hlcdc_pwm_probe,
        .remove = atmel_hlcdc_pwm_remove,