1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX25 current ;
34 package -hardware CYGPKG_HAL_ARM_TX25KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX25 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
54 # ---- conflicts -------------------------------------------------------
55 # There are no conflicts.
57 # ---- contents --------------------------------------------------------
60 # Global build options
61 # Global build options including control over
62 # compiler flags, linker flags and choice of toolchain.
64 cdl_component CYGBLD_GLOBAL_OPTIONS {
65 # There is no associated value.
67 # The following properties are affected by this value
71 # Global command prefix
72 # This option specifies the command prefix used when
73 # invoking the build tools.
75 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
77 # No user value, uncomment the following line to provide one.
78 # user_value arm-926ejs-linux-gnu
79 # value_source default
80 # Default value: arm-926ejs-linux-gnu
83 # Global compiler flags
84 # This option controls the global compiler flags which are used to
85 # compile all packages by default. Individual packages may define
86 # options which override these global flags.
88 cdl_option CYGBLD_GLOBAL_CFLAGS {
90 # No user value, uncomment the following line to provide one.
91 # user_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # value_source default
93 # Default value: "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
94 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
95 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
98 # The following properties are affected by this value
99 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
100 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
101 # option CYGBLD_INFRA_CFLAGS_PIPE
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
105 # Global linker flags
106 # This option controls the global linker flags. Individual
107 # packages may define options which override these global flags.
109 cdl_option CYGBLD_GLOBAL_LDFLAGS {
111 # No user value, uncomment the following line to provide one.
112 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
113 # value_source default
114 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
117 # Build common GDB stub ROM image
118 # Unless a target board has specific requirements to the
119 # stub implementation, it can use a simple common stub.
120 # This option, which gets enabled by platform HALs as
121 # appropriate, controls the building of the common stub.
123 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
125 # No user value, uncomment the following line to provide one.
127 # value_source default
129 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
130 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
135 # ISO C library string functions
137 # This package provides string functions specified by the
138 # ISO C standard - ISO/IEC 9899:1990.
140 cdl_package CYGPKG_LIBC_STRING {
141 # Packages cannot be added or removed, nor can their version be changed,
142 # simply by editing their value. Instead the appropriate configuration
143 # should be used to perform these actions.
145 # This value cannot be modified here.
147 # Current value: 1 current
148 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
149 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
151 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
152 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
154 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
155 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
157 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
158 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
160 # Requires: CYGPKG_ISOINFRA
161 # CYGPKG_ISOINFRA == current
166 # Inline versions of <string.h> functions
167 # This option chooses whether some of the
168 # particularly simple string functions from
169 # <string.h> are available as inline
170 # functions. This may improve performance, and as
171 # the functions are small, may even improve code
174 cdl_option CYGIMP_LIBC_STRING_INLINES {
176 # No user value, uncomment the following line to provide one.
178 # value_source default
182 # Optimize string functions for code size
183 # This option tries to reduce string function
184 # code size at the expense of execution speed. The
185 # same effect can be produced if the code is
186 # compiled with the -Os option to the compiler.
188 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
190 # No user value, uncomment the following line to provide one.
192 # value_source default
196 # Provide BSD compatibility functions
197 # Enabling this option causes various compatibility functions
198 # commonly found in the BSD UNIX operating system to be included.
199 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
200 # strncasecmp, index, rindex and swab.
202 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
204 # No user value, uncomment the following line to provide one.
206 # The inferred value should not be edited directly.
208 # value_source inferred
210 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
211 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
213 # Requires: CYGINT_ISO_CTYPE
214 # CYGINT_ISO_CTYPE == 1
219 # These options control the behaviour of the
220 # strtok() and strtok_r() string tokenization
223 cdl_component CYGPKG_LIBC_STRING_STRTOK {
224 # There is no associated value.
228 # Per-thread strtok()
229 # This option controls whether the string function
230 # strtok() has its state recorded on a per-thread
231 # basis rather than global. If this option is
232 # disabled, some per-thread space can be saved.
233 # Note there is also a POSIX-standard strtok_r()
234 # function to achieve a similar effect with user
235 # support. Enabling this option will use one slot
236 # of kernel per-thread data. You should ensure you
237 # have enough slots configured for all your
240 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
241 # This option is not active
242 # ActiveIf constraint: CYGPKG_KERNEL
243 # CYGPKG_KERNEL (unknown) == 0
247 # No user value, uncomment the following line to provide one.
249 # value_source default
250 # Default value: CYGVAR_KERNEL_THREADS_DATA
251 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
253 # Requires: CYGVAR_KERNEL_THREADS_DATA
254 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
259 # Trace verbosity level for debugging the <string.h>
260 # functions strtok() and strtok_r(). Increase this
261 # value to get additional trace output.
263 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
265 # No user value, uncomment the following line to provide one.
267 # value_source default
269 # Legal values: 0 to 1
274 # This option indicates whether strdup() is to be supported.
276 cdl_option CYGFUN_LIBC_STRING_STRDUP {
277 # ActiveIf constraint: CYGINT_ISO_MALLOC
278 # CYGINT_ISO_MALLOC == 1
281 # Calculated value: 1
286 # C library string functions build options
287 # Package specific build options including control over
288 # compiler flags used only in building this package,
289 # and details of which tests are built.
291 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
292 # There is no associated value.
296 # Additional compiler flags
297 # This option modifies the set of compiler flags for
298 # building the C library. These flags are used in addition
299 # to the set of global flags.
301 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
303 # No user value, uncomment the following line to provide one.
304 # user_value "-fno-rtti -Woverloaded-virtual"
305 # value_source default
306 # Default value: "-fno-rtti -Woverloaded-virtual"
309 # Suppressed compiler flags
310 # This option modifies the set of compiler flags for
311 # building the C library. These flags are removed from
312 # the set of global flags if present.
314 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
316 # No user value, uncomment the following line to provide one.
317 # user_value -Wno-pointer-sign
318 # value_source default
319 # Default value: -Wno-pointer-sign
322 # C library string function tests
323 # This option specifies the set of tests for the C library
326 cdl_option CYGPKG_LIBC_STRING_TESTS {
327 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
329 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
334 # Common ethernet support
335 # doc: ref/io-eth-drv-generic.html
336 # Platform independent ethernet drivers
338 cdl_package CYGPKG_IO_ETH_DRIVERS {
339 # Packages cannot be added or removed, nor can their version be changed,
340 # simply by editing their value. Instead the appropriate configuration
341 # should be used to perform these actions.
343 # This value cannot be modified here.
345 # Current value: 1 current
347 # The following properties are affected by this value
348 # component CYGPKG_REDBOOT_NETWORKING
349 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
350 # package CYGPKG_DEVS_ETH_ARM_TX25
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_FEC
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_PHY
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
361 cdl_interface CYGHWR_NET_DRIVERS {
362 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
363 # This value cannot be modified here.
367 # The following properties are affected by this value
368 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
369 # ActiveIf: CYGHWR_NET_DRIVERS > 1
370 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
374 # Driver supports multicast addressing
375 # This interface defines whether or not a driver can handle
376 # requests for multicast addressing.
378 cdl_interface CYGINT_IO_ETH_MULTICAST {
379 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
380 # This value cannot be modified here.
384 # The following properties are affected by this value
387 # Support printing driver debug information
388 # Selecting this option will include code to allow the driver to
389 # print lots of information on diagnostic output such as full
392 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
394 # No user value, uncomment the following line to provide one.
396 # value_source default
401 # Driver debug output verbosity
402 # The value of this option indicates the default verbosity
403 # level of debugging output. 0 means no debugging output
404 # is made by default. Higher values indicate higher verbosity.
405 # The verbosity level may also be changed at run time by
406 # changing the variable cyg_io_eth_net_debug.
408 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
410 # No user value, uncomment the following line to provide one.
412 # value_source default
417 # Size of scatter-gather I/O lists
418 # A scatter-gather list is used to pass requests to/from
419 # the physical device driver. This list can typically be
420 # small, as the data is normally already packed into reasonable
423 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
425 # No user value, uncomment the following line to provide one.
427 # value_source default
431 # Support for standard eCos TCP/IP stack.
433 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
434 # This option is not active
435 # ActiveIf constraint: CYGPKG_NET
436 # CYGPKG_NET (unknown) == 0
440 # No user value, uncomment the following line to provide one.
442 # value_source default
444 # Requires: CYGINT_ISO_STRING_STRFUNCS
445 # CYGINT_ISO_STRING_STRFUNCS == 1
450 # Warn when there are no more mbufs
451 # Warnings about running out of mbufs are printed to the
452 # diagnostic output channel via diag_printf() if this option
453 # is enabled. Mbufs are the network stack's basic dynamic
454 # memory objects that hold all packets in transit; running
455 # out is bad for performance but not fatal, not a crash.
456 # You might want to turn off the warnings to preserve realtime
457 # properties of the system even in extremis.
459 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
460 # This option is not active
461 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
464 # No user value, uncomment the following line to provide one.
466 # value_source default
470 # Simulate network failures for testing
471 # This package contains a suite of simulated failure modes
472 # for the ethernet device layer, including dropping and/or
473 # corrupting received packets, dropping packets queued for
474 # transmission, and simulating a complete network break.
475 # It requires the kernel as a source of time information.
477 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
478 # This option is not active
479 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
482 # No user value, uncomment the following line to provide one.
484 # value_source default
489 # Drop incoming packets (percentage)
491 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
492 # This option is not active
493 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
494 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
497 # No user value, uncomment the following line to provide one.
499 # value_source default
500 # Default value: 1 10
501 # Legal values: 10 50 80
504 # Corrupt incoming packets (percentage)
506 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
507 # This option is not active
508 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
509 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
512 # No user value, uncomment the following line to provide one.
514 # value_source default
515 # Default value: 1 10
516 # Legal values: 10 50 80
519 # Drop outgoing packets (percentage)
521 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
522 # This option is not active
523 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
524 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
527 # No user value, uncomment the following line to provide one.
529 # value_source default
530 # Default value: 1 10
531 # Legal values: 10 50 80
534 # Simulate a line cut from time to time
535 # This option causes the system to drop all packets for a
536 # short random period (10s of seconds), and then act
537 # normally for up to 4 times that long. This simulates your
538 # sysadmin fiddling with plugs in the network switch
541 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
542 # This option is not active
543 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
544 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
547 # No user value, uncomment the following line to provide one.
549 # value_source default
555 # Support for stand-alone network stack.
557 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
558 # ActiveIf constraint: !CYGPKG_NET
559 # CYGPKG_NET (unknown) == 0
563 # No user value, uncomment the following line to provide one.
565 # value_source default
567 # Requires: CYGINT_ISO_STRING_MEMFUNCS
568 # CYGINT_ISO_STRING_MEMFUNCS == 1
573 # Pass packets to an alternate stack
574 # Define this to allow packets seen by this layer to be
575 # passed on to the previous logical layer, i.e. when
576 # stand-alone processing replaces system (eCos) processing.
578 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
580 # No user value, uncomment the following line to provide one.
582 # value_source default
583 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
584 # CYGPKG_REDBOOT_NETWORKING == 1
588 # Number of [network] buffers
589 # This option is used to allocate space to buffer incoming network
590 # packets. These buffers are used to hold data until they can be
591 # logically processed by higher layers.
593 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
595 # No user value, uncomment the following line to provide one.
597 # value_source default
599 # Legal values: 2 to 32
602 # Show driver warnings
603 # Selecting this option will allows the stand-alone ethernet driver
604 # to display warnings on the system console when incoming network
605 # packets are being discarded due to lack of buffer space.
607 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
608 # ActiveIf constraint: CYGPKG_REDBOOT
609 # CYGPKG_REDBOOT == current
613 # No user value, uncomment the following line to provide one.
615 # value_source default
620 # Support for lwIP network stack.
622 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
623 # This option is not active
624 # ActiveIf constraint: CYGPKG_NET_LWIP
625 # CYGPKG_NET_LWIP (unknown) == 0
629 # No user value, uncomment the following line to provide one.
631 # value_source default
633 # Requires: !CYGPKG_NET
634 # CYGPKG_NET (unknown) == 0
638 # Interrupt support required
639 # This interface is used to indicate to the low
640 # level device drivers that interrupt driven operation
641 # is required by higher layers.
643 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
644 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
645 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
646 # This value cannot be modified here.
650 # The following properties are affected by this value
653 # Common ethernet support build options
655 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
656 # There is no associated value.
660 # Additional compiler flags
661 # This option modifies the set of compiler flags for
662 # building the common ethernet support package. These flags are used in addition
663 # to the set of global flags.
665 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
667 # No user value, uncomment the following line to provide one.
668 # user_value "-D_KERNEL -D__ECOS"
669 # value_source default
670 # Default value: "-D_KERNEL -D__ECOS"
674 # Ethernet driver for Ka-Ro electronics TX25 processor module
676 cdl_package CYGPKG_DEVS_ETH_ARM_TX25 {
677 # Packages cannot be added or removed, nor can their version be changed,
678 # simply by editing their value. Instead the appropriate configuration
679 # should be used to perform these actions.
681 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
682 # CYGPKG_IO_ETH_DRIVERS == current
685 # This value cannot be modified here.
687 # Current value: 1 current
691 # FEC ethernet driver required
693 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
694 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
695 # This value cannot be modified here.
699 # The following properties are affected by this value
700 # package CYGPKG_DEVS_ETH_FEC
701 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
704 # Ka-Ro TX25 ethernet port driver
705 # This option includes the ethernet device driver for the
708 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
710 # No user value, uncomment the following line to provide one.
712 # value_source default
714 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
715 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
717 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
718 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
723 # Device name for the ETH0 ethernet driver
724 # This option sets the name of the ethernet device.
726 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
728 # No user value, uncomment the following line to provide one.
729 # user_value "\"eth0\""
730 # value_source default
731 # Default value: "\"eth0\""
734 # OUI part of MAC address
735 # This option sets OUI part (manufacturer ID) of the MAC address
738 cdl_option CYGDAT_DEVS_ETH_ARM_TX25KARO_OUI {
739 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
740 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
744 # No user value, uncomment the following line to provide one.
745 # user_value "{ 0x00, 0x0c, 0xc6 }"
746 # value_source default
747 # Default value: "{ 0x00, 0x0c, 0xc6 }"
752 # Driver for fast ethernet controller.
753 # Driver for fast ethernet controller.
755 cdl_package CYGPKG_DEVS_ETH_FEC {
756 # Packages cannot be added or removed, nor can their version be changed,
757 # simply by editing their value. Instead the appropriate configuration
758 # should be used to perform these actions.
760 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
761 # CYGPKG_IO_ETH_DRIVERS == current
763 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
764 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
767 # This value cannot be modified here.
769 # Current value: 1 current
773 # MXC FEC ethernet driver build options
775 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
776 # There is no associated value.
780 # Additional compiler flags
781 # This option modifies the set of compiler flags for
782 # building the Cirrus Logic ethernet driver package.
783 # These flags are used in addition
784 # to the set of global flags.
786 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
788 # No user value, uncomment the following line to provide one.
789 # user_value "-D_KERNEL -D__ECOS"
790 # value_source default
791 # Default value: "-D_KERNEL -D__ECOS"
796 # Ethernet transceiver (PHY) support
797 # API for ethernet PHY devices
799 cdl_package CYGPKG_DEVS_ETH_PHY {
800 # Packages cannot be added or removed, nor can their version be changed,
801 # simply by editing their value. Instead the appropriate configuration
802 # should be used to perform these actions.
804 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
805 # CYGPKG_IO_ETH_DRIVERS == current
808 # This value cannot be modified here.
810 # Current value: 1 current
811 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
812 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
817 # Enable driver debugging
818 # Enables the diagnostic debug messages on the
821 cdl_option CYGDBG_DEVS_ETH_PHY {
823 # No user value, uncomment the following line to provide one.
825 # value_source default
829 # Time period (seconds) to wait for auto-negotiation
830 # The length of time to wait for auto-negotiation to complete
831 # before giving up and declaring the link dead/missing.
833 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
835 # No user value, uncomment the following line to provide one.
837 # value_source default
842 # Include support for National Semiconductor DP83847 DsPHYTER II
844 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
846 # No user value, uncomment the following line to provide one.
848 # value_source default
853 # Include support for AMD 79C874 NetPHY
855 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
857 # No user value, uncomment the following line to provide one.
859 # value_source default
864 # Include support for Intel LXT972xxx PHY
866 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
868 # No user value, uncomment the following line to provide one.
870 # value_source default
875 # Include support for ICS 1890 PHY
877 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
879 # No user value, uncomment the following line to provide one.
881 # value_source default
886 # Include support for ICS 1892 PHY
888 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
890 # No user value, uncomment the following line to provide one.
892 # value_source default
897 # Include support for ICS 1893 and 1893AF PHY
899 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
901 # No user value, uncomment the following line to provide one.
903 # value_source default
908 # Include support for the Davicom DM9161A PHY
910 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
912 # No user value, uncomment the following line to provide one.
914 # value_source default
919 # Include support for the Micrel KS8721 PHY
921 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
923 # No user value, uncomment the following line to provide one.
925 # value_source default
930 # Include support for SMSC LAN8700 NetPHY
932 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
934 # No user value, uncomment the following line to provide one.
936 # The inferred value should not be edited directly.
938 # value_source inferred
941 # The following properties are affected by this value
942 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
943 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
948 # ISO C library internationalization functions
950 # This package provides internationalization functions specified by the
951 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
952 # functionality and <ctype.h> functionality.
954 cdl_package CYGPKG_LIBC_I18N {
955 # Packages cannot be added or removed, nor can their version be changed,
956 # simply by editing their value. Instead the appropriate configuration
957 # should be used to perform these actions.
959 # This value cannot be modified here.
961 # Current value: 1 current
962 # Requires: CYGPKG_ISOINFRA
963 # CYGPKG_ISOINFRA == current
969 # These options determine which locales other than the "C" locale
970 # are supported and hence contribute to the size of the executable.
972 cdl_component CYGPKG_LIBC_I18N_LOCALES {
973 # There is no associated value.
977 # Support for multiple locales required
979 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
980 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
981 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
982 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
983 # This value cannot be modified here.
986 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
987 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
990 # The following properties are affected by this value
993 # C-SJIS locale support
994 # This option controls if the "C-SJIS" locale will be
995 # supported by setlocale(). The locale is a hybrid locale
996 # that is mostly the "C" locale with Japanese SJIS multibyte
999 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1001 # No user value, uncomment the following line to provide one.
1003 # value_source default
1006 # The following properties are affected by this value
1007 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1008 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1009 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1010 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1013 # C-JIS locale support
1014 # This option controls if the "C-JIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese JIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-EUCJP locale support
1034 # This option controls if the "C-EUCJP" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese EUCJP multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1054 # Newlib's ctype implementation
1055 # This option enables the implementation of the ctype functions
1056 # that comes with newlib. It is table driven and therefore
1057 # exhibits different performance characteristics. It also offers
1058 # a limited amount of binary compatibility
1059 # with newlib so that programs linked against newlib ctype/locale
1060 # do not need to be recompiled when linked with eCos.
1062 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1064 # No user value, uncomment the following line to provide one.
1066 # value_source default
1068 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1069 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1073 # Per-thread multibyte state
1074 # This option controls whether the multibyte character
1075 # handling functions mblen(), mbtowc(), and wctomb(),
1076 # have their state recorded on a per-thread
1077 # basis rather than global. If this option is
1078 # disabled, some per-thread space can be saved.
1079 # Enabling this option will use three slots
1080 # of kernel per-thread data. You should ensure you
1081 # have enough slots configured for all your
1084 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1085 # This option is not active
1086 # ActiveIf constraint: CYGPKG_KERNEL
1087 # CYGPKG_KERNEL (unknown) == 0
1091 # No user value, uncomment the following line to provide one.
1093 # value_source default
1094 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1095 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1097 # Requires: CYGVAR_KERNEL_THREADS_DATA
1098 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1102 # Size of locale name strings
1103 # This option controls the maximum size of
1104 # locale names and is used, among other things
1105 # to instantiate a static string used
1106 # as a return value from the
1107 # setlocale() function. When requesting the
1108 # current locale settings with LC_ALL, a string
1109 # must be constructed to contain this data, rather
1110 # than just returning a constant string. This
1111 # string data is stored in the static string.
1112 # This depends on the length of locale names,
1113 # hence this option. If just the C locale is
1114 # present, this option can be set as low as 2.
1116 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1118 # No user value, uncomment the following line to provide one.
1120 # value_source default
1121 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1122 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1123 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1124 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1126 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1127 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1128 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1129 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1132 # Inline versions of <ctype.h> functions
1133 # This option chooses whether the simple character
1134 # classification and conversion functions (e.g.
1135 # isupper(), isalpha(), toupper(), etc.)
1136 # from <ctype.h> are available as inline
1137 # functions. This may improve performance and as
1138 # the functions are small, may even improve code
1141 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1143 # No user value, uncomment the following line to provide one.
1145 # value_source default
1147 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1148 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1152 # C library i18n functions build options
1153 # Package specific build options including control over
1154 # compiler flags used only in building this package,
1155 # and details of which tests are built.
1157 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1158 # There is no associated value.
1162 # Additional compiler flags
1163 # This option modifies the set of compiler flags for
1164 # building the C library. These flags are used in addition
1165 # to the set of global flags.
1167 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1169 # No user value, uncomment the following line to provide one.
1170 # user_value "-fno-rtti -Woverloaded-virtual"
1171 # value_source default
1172 # Default value: "-fno-rtti -Woverloaded-virtual"
1175 # Suppressed compiler flags
1176 # This option modifies the set of compiler flags for
1177 # building the C library. These flags are removed from
1178 # the set of global flags if present.
1180 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1182 # No user value, uncomment the following line to provide one.
1183 # user_value -Wno-pointer-sign
1184 # value_source default
1185 # Default value: -Wno-pointer-sign
1188 # C library i18n function tests
1189 # This option specifies the set of tests for the C library
1192 cdl_option CYGPKG_LIBC_I18N_TESTS {
1193 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1195 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1200 # ISO C library general utility functions
1201 # doc: ref/libc.html
1202 # This package provides general utility functions in <stdlib.h>
1203 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1205 cdl_package CYGPKG_LIBC_STDLIB {
1206 # Packages cannot be added or removed, nor can their version be changed,
1207 # simply by editing their value. Instead the appropriate configuration
1208 # should be used to perform these actions.
1210 # This value cannot be modified here.
1212 # Current value: 1 current
1213 # Requires: CYGPKG_ISOINFRA
1214 # CYGPKG_ISOINFRA == current
1216 # Requires: CYGINT_ISO_CTYPE
1217 # CYGINT_ISO_CTYPE == 1
1219 # Requires: CYGINT_ISO_STRING_STRFUNCS
1220 # CYGINT_ISO_STRING_STRFUNCS == 1
1225 # Inline versions of <stdlib.h> functions
1226 # This option chooses whether some of the
1227 # particularly simple standard utility functions
1228 # from <stdlib.h> are available as inline
1229 # functions. This may improve performance, and as
1230 # the functions are small, may even improve code
1233 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1234 # There is no associated value.
1240 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1242 # No user value, uncomment the following line to provide one.
1244 # value_source default
1246 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1247 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1253 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1255 # No user value, uncomment the following line to provide one.
1257 # value_source default
1259 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1260 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1264 # atof() / atoi() / atol()
1266 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1268 # No user value, uncomment the following line to provide one.
1270 # value_source default
1272 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1273 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1278 # Random number generation
1279 # These options control the behaviour of the
1280 # functions rand(), srand() and rand_r()
1282 cdl_component CYGPKG_LIBC_RAND {
1283 # There is no associated value.
1287 # Per-thread random seed
1288 # doc: ref/libc-thread-safety.html
1289 # This option controls whether the pseudo-random
1290 # number generation functions rand() and srand()
1291 # have their state recorded on a per-thread
1292 # basis rather than global. If this option is
1293 # disabled, some per-thread space can be saved.
1294 # Note there is also a POSIX-standard rand_r()
1295 # function to achieve a similar effect with user
1296 # support. Enabling this option will use one slot
1297 # of kernel per-thread data. You should ensure you
1298 # have enough slots configured for all your
1301 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1303 # No user value, uncomment the following line to provide one.
1305 # value_source default
1307 # Requires: CYGVAR_KERNEL_THREADS_DATA
1308 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1312 # Random number seed
1313 # This selects the initial random number seed for
1314 # rand()'s pseudo-random number generator. For
1315 # strict ISO standard compliance, this should be 1,
1316 # as per section 7.10.2.2 of the standard.
1318 cdl_option CYGNUM_LIBC_RAND_SEED {
1320 # No user value, uncomment the following line to provide one.
1322 # value_source default
1324 # Legal values: 0 to 0x7fffffff
1328 # Trace verbosity level for debugging the rand(),
1329 # srand() and rand_r() functions. Increase this
1330 # value to get additional trace output.
1332 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1334 # No user value, uncomment the following line to provide one.
1336 # value_source default
1338 # Legal values: 0 to 1
1341 # Simplest implementation
1342 # This provides a very simple implementation of rand()
1343 # that does not perform well with randomness in the
1344 # lower significant bits. However it is exceptionally
1345 # fast. It uses the sample algorithm from the ISO C
1348 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1350 # No user value, uncomment the following line to provide one.
1352 # value_source default
1356 # Simple implementation #1
1357 # This provides a very simple implementation of rand()
1358 # based on the simplest implementation above. However
1359 # it does try to work around the lack of randomness
1360 # in the lower significant bits, at the expense of a
1363 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1370 # Knuth implementation #1
1371 # This implements a slightly more complex algorithm
1372 # published in Donald E. Knuth's Art of Computer
1373 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1374 # This produces better random numbers than the
1375 # simplest approach but is slower.
1377 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1386 # This option allows use of the utility function
1387 # strtod() (and consequently atof()) to convert
1388 # from string to double precision floating point
1389 # numbers. Disabling this option removes the
1390 # dependency on the math library package.
1392 cdl_option CYGFUN_LIBC_strtod {
1394 # No user value, uncomment the following line to provide one.
1396 # value_source default
1397 # Default value: 0 != CYGPKG_LIBM
1398 # CYGPKG_LIBM (unknown) == 0
1400 # Requires: CYGPKG_LIBM
1401 # CYGPKG_LIBM (unknown) == 0
1405 # Provides long long conversion functions
1406 # Enabling this option will provide support for the strtoll(),
1407 # strtoull() and atoll() conversion functions, which are
1408 # the long long variants of the standard versions of these
1409 # functions. Supporting this requires extra code and compile
1412 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1419 # bsearch() tracing level
1420 # Trace verbosity level for debugging the <stdlib.h>
1421 # binary search function bsearch(). Increase this
1422 # value to get additional trace output.
1424 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1426 # No user value, uncomment the following line to provide one.
1428 # value_source default
1430 # Legal values: 0 to 1
1433 # qsort() tracing level
1434 # Trace verbosity level for debugging the <stdlib.h>
1435 # quicksort function qsort(). Increase this value
1436 # to get additional trace output.
1438 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1440 # No user value, uncomment the following line to provide one.
1442 # value_source default
1444 # Legal values: 0 to 1
1447 # C library stdlib build options
1448 # Package specific build options including control over
1449 # compiler flags used only in building this package,
1450 # and details of which tests are built.
1452 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1453 # There is no associated value.
1457 # Additional compiler flags
1458 # This option modifies the set of compiler flags for
1459 # building this package. These flags are used in addition
1460 # to the set of global flags.
1462 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1464 # No user value, uncomment the following line to provide one.
1465 # user_value "-fno-rtti -Woverloaded-virtual"
1466 # value_source default
1467 # Default value: "-fno-rtti -Woverloaded-virtual"
1470 # Suppressed compiler flags
1471 # This option modifies the set of compiler flags for
1472 # building this package. These flags are removed from
1473 # the set of global flags if present.
1475 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1477 # No user value, uncomment the following line to provide one.
1478 # user_value -Wno-pointer-sign
1479 # value_source default
1480 # Default value: -Wno-pointer-sign
1483 # C library stdlib tests
1484 # This option specifies the set of tests for this package.
1486 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1487 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1489 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1496 # doc: ref/the-ecos-hardware-abstraction-layer.html
1497 # The eCos HAL package provide a porting layer for
1498 # higher-level parts of the system such as the kernel and the
1499 # C library. Each installation should have HAL packages for
1500 # one or more architectures, and for each architecture there
1501 # may be one or more supported platforms. It is necessary to
1502 # select one target architecture and one platform for that
1503 # architecture. There are also a number of configuration
1504 # options that are common to all HAL packages.
1506 cdl_package CYGPKG_HAL {
1507 # Packages cannot be added or removed, nor can their version be changed,
1508 # simply by editing their value. Instead the appropriate configuration
1509 # should be used to perform these actions.
1511 # This value cannot be modified here.
1513 # Current value: 1 current
1514 # Requires: CYGPKG_INFRA
1515 # CYGPKG_INFRA == current
1518 # The following properties are affected by this value
1522 # Platform-independent HAL options
1523 # A number of configuration options are common to most or all
1524 # HAL packages, for example options controlling how much state
1525 # should be saved during a context switch. The implementations
1526 # of these options will vary from architecture to architecture.
1528 cdl_component CYGPKG_HAL_COMMON {
1529 # There is no associated value.
1533 # Provide eCos kernel support
1534 # The HAL can be configured to either support the full eCos
1535 # kernel, or to support only very simple applications which do
1536 # not require a full kernel. If kernel support is not required
1537 # then some of the startup, exception, and interrupt handling
1538 # code can be eliminated.
1540 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1542 # No user value, uncomment the following line to provide one.
1544 # value_source default
1545 # Default value: CYGPKG_KERNEL
1546 # CYGPKG_KERNEL (unknown) == 0
1548 # Requires: CYGPKG_KERNEL
1549 # CYGPKG_KERNEL (unknown) == 0
1553 # HAL exception support
1554 # When a processor exception occurs, for example an attempt to
1555 # execute an illegal instruction or to perform a divide by
1556 # zero, this exception may be handled in a number of different
1557 # ways. If the target system has gdb support then typically
1558 # the exception will be handled by gdb code. Otherwise if the
1559 # HAL exception support is enabled then the HAL will invoke a
1560 # routine deliver_exception(). Typically this routine will be
1561 # provided by the eCos kernel, but it is possible for
1562 # application code to provide its own implementation. If the
1563 # HAL exception support is not enabled and a processor
1564 # exception occurs then the behaviour of the system is
1567 cdl_option CYGPKG_HAL_EXCEPTIONS {
1569 # No user value, uncomment the following line to provide one.
1571 # value_source default
1572 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1573 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1575 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1576 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1580 # Stop calling constructors early
1581 # This option supports environments where some constructors
1582 # must be run in the context of a thread rather than at
1583 # simple system startup time. A boolean flag named
1584 # cyg_hal_stop_constructors is set to 1 when constructors
1585 # should no longer be invoked. It is up to some other
1586 # package to deal with the rest of the constructors.
1587 # In the current version this is only possible with the
1590 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1592 # No user value, uncomment the following line to provide one.
1594 # value_source default
1596 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1597 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1601 # HAL uses the MMU and allows for CDL manipulation of it's use
1603 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1604 # No options implement this inferface
1605 # This value cannot be modified here.
1609 # The following properties are affected by this value
1610 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1611 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1614 # Install MMU tables.
1615 # This option controls whether this application installs
1616 # its own Memory Management Unit (MMU) tables, or relies on the
1617 # existing environment to run.
1619 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1620 # This option is not active
1621 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1622 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1626 # No user value, uncomment the following line to provide one.
1628 # value_source default
1629 # Default value: CYG_HAL_STARTUP != "RAM"
1630 # CYG_HAL_STARTUP == ROMRAM
1633 # The following properties are affected by this value
1634 # option CYGSEM_HAL_STATIC_MMU_TABLES
1635 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1638 # Use static MMU tables.
1639 # This option defines an environment where any Memory
1640 # Management Unit (MMU) tables are constant. Normally used by ROM
1641 # based environments, this provides a way to save RAM usage which
1642 # would otherwise be required for these tables.
1644 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1650 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1651 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1655 # Route diagnostic output to debug channel
1656 # If not inheriting the console setup from the ROM monitor,
1657 # it is possible to redirect diagnostic output to the debug
1658 # channel by enabling this option. Depending on the debugger
1659 # used it may also be necessary to select a mangler for the
1660 # output to be displayed by the debugger.
1662 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1663 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1664 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1666 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1667 # CYGPKG_HAL_ARM == current
1668 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1669 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1670 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1674 # No user value, uncomment the following line to provide one.
1676 # value_source default
1677 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1678 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1679 # CYG_HAL_STARTUP == ROMRAM
1682 # The following properties are affected by this value
1683 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1684 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1688 # Mangler used on diag output
1689 # It is sometimes necessary to mangle (encode) the
1690 # diag ASCII text output in order for it to show up at the
1691 # other end. In particular, GDB may silently ignore raw
1694 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1695 # This option is not active
1696 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1699 # No user value, uncomment the following line to provide one.
1701 # value_source default
1702 # Default value: GDB
1703 # Legal values: "GDB" "None"
1708 # HAL interrupt handling
1709 # A number of configuration options related to interrupt
1710 # handling are common to most or all HAL packages, even though
1711 # the implementations will vary from architecture to
1714 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1715 # There is no associated value.
1719 # Use separate stack for interrupts
1720 # When an interrupt occurs this interrupt can be handled either
1721 # on the current stack or on a separate stack maintained by the
1722 # HAL. Using a separate stack requires a small number of extra
1723 # instructions in the interrupt handling code, but it has the
1724 # advantage that it is no longer necessary to allow extra space
1725 # in every thread stack for the interrupt handlers. The amount
1726 # of extra space required depends on the interrupt handlers
1727 # that are being used.
1729 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1731 # No user value, uncomment the following line to provide one.
1733 # The inferred value should not be edited directly.
1735 # value_source inferred
1738 # The following properties are affected by this value
1739 # package CYGPKG_REDBOOT
1740 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1743 # Interrupt stack size
1744 # This configuration option specifies the stack size in bytes
1745 # for the interrupt stack. Typically this should be a multiple
1746 # of 16, but the exact requirements will vary from architecture
1747 # to architecture. The interrupt stack serves two separate
1748 # purposes. It is used as the stack during system
1749 # initialization. In addition, if the interrupt system is
1750 # configured to use a separate stack then all interrupts will
1751 # be processed on this stack. The exact memory requirements
1752 # will vary from application to application, and will depend
1753 # heavily on whether or not other interrupt-related options,
1754 # for example nested interrupts, are enabled. On most targets,
1755 # in a configuration with no kernel this stack will also be
1756 # the stack used to invoke the application, and must obviously
1757 # be appropriately large in that case.
1759 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1761 # No user value, uncomment the following line to provide one.
1763 # value_source default
1764 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1765 # CYGPKG_KERNEL (unknown) == 0
1767 # Legal values: 128 to 1048576
1770 # Allow nested interrupts
1771 # When an interrupt occurs the HAL interrupt handling code can
1772 # either leave interrupts disabled for the duration of the
1773 # interrupt handling code, or by doing some extra work it can
1774 # reenable interrupts before invoking the interrupt handler and
1775 # thus allow nested interrupts to happen. If all the interrupt
1776 # handlers being used are small and do not involve any loops
1777 # then it is usually better to disallow nested interrupts.
1778 # However if any of the interrupt handlers are more complicated
1779 # than nested interrupts will usually be required.
1781 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1783 # No user value, uncomment the following line to provide one.
1785 # value_source default
1789 # Save minimum context on interrupt
1790 # The HAL interrupt handling code can exploit the calling conventions
1791 # defined for a given architecture to reduce the amount of state
1792 # that has to be saved. Generally this improves performance and
1793 # reduces code size. However it can make source-level debugging
1796 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1798 # No user value, uncomment the following line to provide one.
1800 # The inferred value should not be edited directly.
1802 # value_source inferred
1805 # The following properties are affected by this value
1806 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1807 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1808 # component CYGBLD_BUILD_REDBOOT
1809 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1812 # Chain all interrupts together
1813 # Interrupts can be attached to vectors either singly, or be
1814 # chained together. The latter is necessary if there is no way
1815 # of discovering which device has interrupted without
1816 # inspecting the device itself. It can also reduce the amount
1817 # of RAM needed for interrupt decoding tables and code.
1819 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1821 # No user value, uncomment the following line to provide one.
1823 # value_source default
1827 # Ignore spurious [fleeting] interrupts
1828 # On some hardware, interrupt sources may not be de-bounced or
1829 # de-glitched. Rather than try to handle these interrupts (no
1830 # handling may be possible), this option allows the HAL to simply
1831 # ignore them. In most cases, if the interrupt is real it will
1832 # reoccur in a detectable form.
1834 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1836 # No user value, uncomment the following line to provide one.
1838 # value_source default
1843 # HAL context switch support
1844 # A number of configuration options related to thread contexts
1845 # are common to most or all HAL packages, even though the
1846 # implementations will vary from architecture to architecture.
1848 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1849 # There is no associated value.
1851 # The following properties are affected by this value
1855 # Use minimum thread context
1856 # The thread context switch code can exploit the calling
1857 # conventions defined for a given architecture to reduce the
1858 # amount of state that has to be saved during a context
1859 # switch. Generally this improves performance and reduces
1860 # code size. However it can make source-level debugging more
1863 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1865 # No user value, uncomment the following line to provide one.
1867 # The inferred value should not be edited directly.
1869 # value_source inferred
1872 # The following properties are affected by this value
1873 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1874 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1875 # component CYGBLD_BUILD_REDBOOT
1876 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1880 # Explicit control over cache behaviour
1881 # These options let the default behaviour of the caches
1882 # be easily configurable.
1884 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1885 # There is no associated value.
1889 # Enable DATA cache on startup
1890 # Enabling this option will cause the data cache to be enabled
1891 # as soon as practicable when eCos starts up. One would choose
1892 # to disable this if the data cache cannot safely be turned on,
1893 # such as a case where the cache(s) require additional platform
1896 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1898 # No user value, uncomment the following line to provide one.
1900 # value_source default
1905 # DATA cache mode on startup
1906 # This option controls the mode the cache will be set to
1907 # when enabled on startup.
1909 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1911 # No user value, uncomment the following line to provide one.
1912 # user_value COPYBACK
1913 # value_source default
1914 # Default value: COPYBACK
1915 # Legal values: "COPYBACK" "WRITETHRU"
1919 # Enable INSTRUCTION cache on startup
1920 # Enabling this option will cause the instruction cache to be enabled
1921 # as soon as practicable when eCos starts up. One would choose
1922 # to disable this if the instruction cache cannot safely be turned on,
1923 # such as a case where the cache(s) require additional platform
1926 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1928 # No user value, uncomment the following line to provide one.
1930 # value_source default
1935 # Source-level debugging support
1936 # If the source level debugger gdb is to be used for debugging
1937 # application code then it may be necessary to configure in support
1938 # for this in the HAL.
1940 cdl_component CYGPKG_HAL_DEBUG {
1941 # There is no associated value.
1945 # Support for GDB stubs
1946 # The HAL implements GDB stubs for the target.
1948 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1949 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
1950 # This value cannot be modified here.
1954 # The following properties are affected by this value
1955 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1956 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1957 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1958 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1961 # Include GDB stubs in HAL
1962 # This option causes a set of GDB stubs to be included into the
1963 # system. On some target systems the GDB support will be
1964 # provided by other means, for example by a ROM monitor. On
1965 # other targets, especially when building a ROM-booting system,
1966 # the necessary support has to go into the target library
1967 # itself. When GDB stubs are include in a configuration, HAL
1968 # serial drivers must also be included.
1970 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1971 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1972 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1976 # No user value, uncomment the following line to provide one.
1978 # The inferred value should not be edited directly.
1980 # value_source inferred
1982 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
1983 # CYGSEM_HAL_USE_ROM_MONITOR == 0
1985 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1986 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
1988 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1989 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
1991 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
1992 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1993 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
1996 # The following properties are affected by this value
1997 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1998 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1999 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2000 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2001 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2002 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2003 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2004 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2005 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2006 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2007 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2008 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2009 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2010 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2011 # option CYGPKG_HAL_GDB_FILEIO
2012 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2013 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2014 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2015 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2016 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2017 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2018 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # Support for external break support in GDB stubs
2022 # The HAL implements external break (or asynchronous interrupt)
2023 # in the GDB stubs for the target.
2025 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2026 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
2027 # This value cannot be modified here.
2031 # The following properties are affected by this value
2032 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2033 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2036 # Include GDB external break support for stubs
2037 # This option causes the GDB stub to add a serial interrupt handler
2038 # which will listen for GDB break packets. This lets you stop the
2039 # target asynchronously when using GDB, usually by hitting Control+C
2040 # or pressing the STOP button. This option differs from
2041 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2042 # GDB stubs are present.
2044 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2045 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2046 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2050 # No user value, uncomment the following line to provide one.
2052 # value_source default
2053 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2054 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2056 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2057 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2060 # The following properties are affected by this value
2061 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2062 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2063 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2064 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2065 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2066 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2069 # Platform does not support CTRLC
2071 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2072 # No options implement this inferface
2073 # This value cannot be modified here.
2077 # The following properties are affected by this value
2078 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2079 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2082 # Include GDB external break support when no stubs
2083 # This option adds an interrupt handler for the GDB serial line
2084 # which will listen for GDB break packets. This lets you stop the
2085 # target asynchronously when using GDB, usually by hitting Control+C
2086 # or pressing the STOP button. This option differs from
2087 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2088 # stubs are NOT present.
2090 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2091 # This option is not active
2092 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2093 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2094 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2096 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2097 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2101 # No user value, uncomment the following line to provide one.
2103 # value_source default
2104 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2105 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2107 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2108 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2111 # The following properties are affected by this value
2112 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2113 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2114 # component CYGBLD_BUILD_REDBOOT
2115 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2118 # Include GDB multi-threading debug support
2119 # This option enables some extra HAL code which is needed
2120 # to support multi-threaded source level debugging.
2122 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2123 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2124 # CYGSEM_HAL_ROM_MONITOR == 1
2125 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2129 # No user value, uncomment the following line to provide one.
2131 # value_source default
2134 # The following properties are affected by this value
2135 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2136 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2137 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2138 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2141 # Number of times to retry sending a $O packet
2142 # This option controls the number of attempts that eCos programs
2143 # will make to send a $O packet to a host GDB process. If it is
2144 # set non-zero, then the target process will attempt to resend the
2145 # $O packet data up to this number of retries. Caution: use of
2146 # this option is not recommended as it can thoroughly confuse the
2149 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2151 # No user value, uncomment the following line to provide one.
2153 # value_source default
2157 # Timeout period for GDB packets
2158 # This option controls the time (in milliseconds) that eCos programs
2159 # will wait for a response when sending packets to a host GDB process.
2160 # If this time elapses, then the packet will be resent, up to some
2161 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2163 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2165 # No user value, uncomment the following line to provide one.
2167 # value_source default
2168 # Default value: 500
2171 # Location of CRC32 table
2172 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2173 # and placed in ROM, or generated at runtime in RAM. Depending on
2174 # your memory constraints, one of these options may be better.
2176 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2178 # No user value, uncomment the following line to provide one.
2180 # value_source default
2181 # Default value: RAM
2182 # Legal values: "ROM" "RAM"
2186 # ROM monitor support
2187 # Support for ROM monitors can be built in to your application.
2188 # It may also be relevant to build your application as a ROM monitor
2189 # itself. Such options are contained here if relevant for your chosen
2190 # platform. The options and ROM monitors available to choose are
2191 # platform-dependent.
2193 cdl_component CYGPKG_HAL_ROM_MONITOR {
2194 # There is no associated value.
2196 # The following properties are affected by this value
2200 # Target has virtual vector support
2202 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2203 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
2204 # This value cannot be modified here.
2208 # The following properties are affected by this value
2209 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2210 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2213 # Target supports baud rate control via vectors
2214 # Whether this target supports the __COMMCTL_GETBAUD
2215 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2217 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2218 # Implemented by CYGPKG_HAL_ARM_MX25, active, enabled
2219 # This value cannot be modified here.
2223 # The following properties are affected by this value
2224 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2225 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2228 # Enable use of virtual vector calling interface
2229 # Virtual vector support allows the HAL to let the ROM
2230 # monitor handle certain operations. The virtual vector table
2231 # defines a calling interface between applications running in
2232 # RAM and the ROM monitor.
2234 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2235 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2236 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2239 # Calculated value: 1
2243 # The following properties are affected by this value
2244 # component CYGBLD_BUILD_REDBOOT
2245 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2246 # package CYGPKG_DEVS_ETH_PHY
2247 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2251 # Inherit console settings from ROM monitor
2252 # When this option is set, the application will inherit
2253 # the console as set up by the ROM monitor. This means
2254 # that the application will use whatever channel and
2255 # mangling style was used by the ROM monitor when
2256 # the application was launched.
2258 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2259 # This option is not active
2260 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2261 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2265 # No user value, uncomment the following line to provide one.
2267 # value_source default
2268 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2269 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2272 # The following properties are affected by this value
2273 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2274 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2275 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2276 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2279 # Debug channel is configurable
2280 # This option is a configuration hint - it is enabled
2281 # when the HAL initialization code will make use
2282 # of the debug channel configuration option.
2284 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2285 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2286 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2290 # The following properties are affected by this value
2291 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2292 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2295 # Console channel is configurable
2296 # This option is a configuration hint - it is enabled
2297 # when the HAL initialization code will make use
2298 # of the console channel configuration option.
2300 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2301 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2302 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2303 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2307 # The following properties are affected by this value
2308 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2309 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2312 # Initialize whole of virtual vector table
2313 # This option will cause the whole of the virtual
2314 # vector table to be initialized with dummy values on
2315 # startup. When this option is enabled, all the
2316 # options below must also be enabled - or the
2317 # table would be empty when the application
2319 # On targets where older ROM monitors without
2320 # virtual vector support may still be in use, it is
2321 # necessary for RAM applictions to initialize the
2322 # table (since all HAL diagnostics and debug IO
2323 # happens via the table).
2325 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2327 # No user value, uncomment the following line to provide one.
2329 # value_source default
2330 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2331 # CYG_HAL_STARTUP == ROMRAM
2332 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2334 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2335 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2337 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2338 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2340 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2341 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2343 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2344 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2346 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2347 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2350 # The following properties are affected by this value
2351 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2352 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2353 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2354 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2355 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2356 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2357 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2359 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2360 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2361 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2362 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2363 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2364 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2367 # Claim virtual vector table entries by default
2368 # By default most virtual vectors will be claimed by
2369 # RAM startup configurations, meaning that the RAM
2370 # application will provide the services. The
2371 # exception is COMMS support (HAL
2372 # diagnostics/debugging IO) which is left in the
2373 # control of the ROM monitor.
2374 # The reasoning behind this is to get as much of the
2375 # code exercised during regular development so it
2376 # is known to be working the few times a new ROM
2377 # monitor or a ROM production configuration is used
2378 # - COMMS are excluded only by necessity in order to
2379 # avoid breaking an existing debugger connections
2380 # (there may be ways around this).
2381 # For production RAM configurations this option can
2382 # be switched off, causing the appliction to rely on
2383 # the ROM monitor for these services, thus
2384 # saving some space.
2385 # Individual vectors may also be left unclaimed,
2386 # controlled by the below options (meaning that the
2387 # associated service provided by the ROM monitor
2390 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2391 # This option is not active
2392 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2393 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2397 # No user value, uncomment the following line to provide one.
2399 # value_source default
2402 # The following properties are affected by this value
2403 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2404 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2405 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2406 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2407 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2408 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2409 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2410 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2413 # Claim reset virtual vectors
2414 # This option will cause the reset and kill_by_reset
2415 # virtual vectors to be claimed.
2417 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2419 # No user value, uncomment the following line to provide one.
2421 # value_source default
2422 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2423 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2424 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2427 # The following properties are affected by this value
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2429 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2432 # Claim version virtual vectors
2433 # This option will cause the version
2434 # virtual vectors to be claimed.
2436 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2438 # No user value, uncomment the following line to provide one.
2440 # value_source default
2441 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2442 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2446 # Claim delay_us virtual vector
2447 # This option will cause the delay_us
2448 # virtual vector to be claimed.
2450 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2452 # No user value, uncomment the following line to provide one.
2454 # value_source default
2455 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2456 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2457 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2460 # The following properties are affected by this value
2461 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2465 # Claim cache virtual vectors
2466 # This option will cause the cache virtual vectors
2469 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2471 # No user value, uncomment the following line to provide one.
2473 # value_source default
2474 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2475 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2479 # The following properties are affected by this value
2480 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2481 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2484 # Claim data virtual vectors
2485 # This option will cause the data virtual vectors
2486 # to be claimed. At present there is only one, used
2487 # by the RedBoot ethernet driver to share diag output.
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2504 # Claim comms virtual vectors
2505 # This option will cause the communication tables
2506 # that are part of the virtual vectors mechanism to
2507 # be claimed. Note that doing this may cause an
2508 # existing ROM monitor communication connection to
2509 # be closed. For this reason, the option is disabled
2510 # per default for normal application
2513 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2515 # No user value, uncomment the following line to provide one.
2517 # value_source default
2518 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2519 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2520 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2523 # The following properties are affected by this value
2524 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2525 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2526 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2527 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2528 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2529 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2530 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2531 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2534 # Do diagnostic IO via virtual vector table
2535 # All HAL IO happens via the virtual vector table / comm
2536 # tables when those tables are supported by the HAL.
2537 # If so desired, the low-level IO functions can
2538 # still be provided by the RAM application by
2539 # enabling the CLAIM_COMMS option.
2541 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2542 # Calculated value: 1
2546 # The following properties are affected by this value
2547 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2548 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2549 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2550 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Behave as a ROM monitor
2555 # Enable this option if this program is to be used as a ROM monitor,
2556 # i.e. applications will be loaded into RAM on the TX25 module, and this
2557 # ROM monitor may process exceptions or interrupts generated from the
2558 # application. This enables features such as utilizing a separate
2559 # interrupt stack when exceptions are generated.
2561 cdl_option CYGSEM_HAL_ROM_MONITOR {
2563 # No user value, uncomment the following line to provide one.
2565 # The inferred value should not be edited directly.
2567 # value_source inferred
2569 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2570 # CYG_HAL_STARTUP == ROMRAM
2571 # CYG_HAL_STARTUP == ROMRAM
2574 # The following properties are affected by this value
2575 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2576 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2577 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2578 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2579 # option CYGPRI_REDBOOT_ROM_MONITOR
2580 # Requires: CYGSEM_HAL_ROM_MONITOR
2583 # Work with a ROM monitor
2584 # Support can be enabled for different varieties of ROM monitor.
2585 # This support changes various eCos semantics such as the encoding
2586 # of diagnostic output, or the overriding of hardware interrupt
2588 # Firstly there is "Generic" support which prevents the HAL
2589 # from overriding the hardware vectors that it does not use, to
2590 # instead allow an installed ROM monitor to handle them. This is
2591 # the most basic support which is likely to be common to most
2592 # implementations of ROM monitor.
2593 # "GDB_stubs" provides support when GDB stubs are included in
2594 # the ROM monitor or boot ROM.
2596 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2598 # No user value, uncomment the following line to provide one.
2600 # value_source default
2601 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2602 # CYG_HAL_STARTUP == ROMRAM
2604 # Legal values: "Generic" "GDB_stubs"
2605 # Requires: CYG_HAL_STARTUP == "RAM"
2606 # CYG_HAL_STARTUP == ROMRAM
2609 # The following properties are affected by this value
2610 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2611 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2612 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2613 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2614 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2615 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2616 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2617 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2621 # Platform defined I/O channels.
2622 # Platforms which provide additional I/O channels can implement
2623 # this interface, indicating that the function plf_if_init()
2624 # needs to be called.
2626 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2627 # No options implement this inferface
2628 # This value cannot be modified here.
2633 # Platform IDE I/O support.
2634 # Platforms which provide IDE controllers can implement
2635 # this interface, indicating that IDE I/O macros are
2638 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2639 # No options implement this inferface
2640 # This value cannot be modified here.
2644 # The following properties are affected by this value
2645 # component CYGSEM_REDBOOT_DISK_IDE
2646 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2649 # File I/O operations via GDB
2650 # This option enables support for various file I/O
2651 # operations using the GDB remote protocol to communicate
2652 # with GDB. The operations are then performed on the
2653 # debugging host by proxy. These operations are only
2654 # currently available by using a system call interface
2655 # to RedBoot. This may change in the future.
2657 cdl_option CYGPKG_HAL_GDB_FILEIO {
2658 # This option is not active
2659 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2660 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2664 # No user value, uncomment the following line to provide one.
2666 # value_source default
2668 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2669 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2673 # Build Compiler sanity checking tests
2674 # Enabling this option causes compiler tests to be built.
2676 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2678 # No user value, uncomment the following line to provide one.
2680 # value_source default
2683 # The following properties are affected by this value
2684 # component CYGPKG_HAL_TESTS
2685 # Calculated: "tests/context tests/basic"
2686 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2687 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2688 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2692 # This option specifies the set of tests for the common HAL.
2694 cdl_component CYGPKG_HAL_TESTS {
2695 # Calculated value: "tests/context tests/basic"
2696 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2697 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2698 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2699 # CYGINT_HAL_TESTS_NO_CACHES == 0
2700 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2701 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2703 # Current_value: tests/context tests/basic tests/cache tests/intr
2707 # Interface for cache presence
2708 # Some architectures and/or platforms do not have caches. By
2709 # implementing this interface, these can disable the various
2710 # cache-related tests.
2712 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2713 # No options implement this inferface
2714 # This value cannot be modified here.
2716 # Current value: 0 0
2718 # The following properties are affected by this value
2719 # component CYGPKG_HAL_TESTS
2720 # Calculated: "tests/context tests/basic"
2721 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2722 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2723 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2728 # The ARM architecture HAL package provides generic
2729 # support for this processor architecture. It is also
2730 # necessary to select a specific target platform HAL
2733 cdl_package CYGPKG_HAL_ARM {
2734 # Packages cannot be added or removed, nor can their version be changed,
2735 # simply by editing their value. Instead the appropriate configuration
2736 # should be used to perform these actions.
2738 # This value cannot be modified here.
2740 # Current value: 1 current
2742 # The following properties are affected by this value
2743 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2744 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2745 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2746 # ActiveIf: CYGPKG_HAL_ARM
2750 # The CPU architecture supports THUMB mode
2752 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2753 # No options implement this inferface
2754 # This value cannot be modified here.
2758 # The following properties are affected by this value
2759 # option CYGHWR_THUMB
2760 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2761 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2762 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2765 # Enable Thumb instruction set
2766 # Enable use of the Thumb instruction set.
2768 cdl_option CYGHWR_THUMB {
2769 # This option is not active
2770 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2771 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2775 # No user value, uncomment the following line to provide one.
2777 # value_source default
2780 # The following properties are affected by this value
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2785 # Enable Thumb interworking compiler option
2786 # This option controls the use of -mthumb-interwork in the
2787 # compiler flags. It defaults enabled in Thumb or ROM monitor
2788 # configurations, but can be overridden for reduced memory
2789 # footprint where interworking is not a requirement.
2791 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2792 # This option is not active
2793 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2794 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2798 # No user value, uncomment the following line to provide one.
2800 # value_source default
2801 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2803 # CYGSEM_HAL_ROM_MONITOR == 1
2807 # The platform and architecture supports Big Endian operation
2809 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2810 # No options implement this inferface
2811 # This value cannot be modified here.
2815 # The following properties are affected by this value
2816 # option CYGHWR_HAL_ARM_BIGENDIAN
2817 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2820 # Use big-endian mode
2821 # Use the CPU in big-endian mode.
2823 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2824 # This option is not active
2825 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2826 # CYGINT_HAL_ARM_BIGENDIAN == 0
2830 # No user value, uncomment the following line to provide one.
2832 # value_source default
2836 # The platform uses a processor with an ARM7 core
2838 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2839 # No options implement this inferface
2840 # This value cannot be modified here.
2844 # The following properties are affected by this value
2845 # option CYGHWR_HAL_ARM_CPU_FAMILY
2846 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2847 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2848 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2849 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2851 # option CYGHWR_HAL_ARM_CPU_FAMILY
2852 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2853 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2854 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2855 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2859 # The platform uses a processor with an ARM9 core
2861 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2862 # Implemented by CYGPKG_HAL_ARM_MX25, active, enabled
2863 # This value cannot be modified here.
2867 # The following properties are affected by this value
2868 # option CYGHWR_HAL_ARM_CPU_FAMILY
2869 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2870 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2871 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2872 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2874 # option CYGHWR_HAL_ARM_CPU_FAMILY
2875 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2876 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2877 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2878 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2882 # The platform uses a processor with a StrongARM core
2884 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2885 # No options implement this inferface
2886 # This value cannot be modified here.
2890 # The following properties are affected by this value
2891 # option CYGHWR_HAL_ARM_CPU_FAMILY
2892 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2893 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2894 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2895 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2897 # option CYGHWR_HAL_ARM_CPU_FAMILY
2898 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2899 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2900 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2901 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2905 # The platform uses a processor with a XScale core
2907 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2908 # No options implement this inferface
2909 # This value cannot be modified here.
2913 # The following properties are affected by this value
2914 # option CYGHWR_HAL_ARM_CPU_FAMILY
2915 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2916 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2917 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2918 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2920 # option CYGHWR_HAL_ARM_CPU_FAMILY
2921 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2922 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2923 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2924 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2929 # It is possible to optimize code for different
2930 # ARM CPU families. This option selects which CPU to
2931 # optimize for on boards that support multiple CPU types.
2933 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2935 # No user value, uncomment the following line to provide one.
2937 # value_source default
2938 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2939 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2940 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2941 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2943 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2944 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2945 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2946 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2948 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2949 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2950 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2951 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2953 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2954 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2955 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2956 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2959 # Provide diagnostic dump for exceptions
2960 # Print messages about hardware exceptions, including
2961 # raw exception frame dump and register contents.
2963 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2965 # No user value, uncomment the following line to provide one.
2967 # value_source default
2969 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2970 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2974 # Process all exceptions with the eCos application
2975 # Normal RAM-based programs which do not include GDB stubs
2976 # defer processing of the illegal instruction exception to GDB.
2977 # Setting this options allows the program to explicitly handle
2978 # the illegal instruction exception itself. Note: this will
2979 # prevent the use of GDB to debug the application as breakpoints
2980 # will no longer work.
2982 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
2984 # No user value, uncomment the following line to provide one.
2986 # value_source default
2990 # Support GDB thread operations via ICE/Multi-ICE
2991 # Allow GDB to get thread information via the ICE/Multi-ICE
2994 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
2996 # No user value, uncomment the following line to provide one.
2998 # value_source default
3000 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3001 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3003 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3004 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3006 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3007 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3011 # Support for 'gprof' callbacks
3012 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3013 # to acquire the interrupt-context PC and SP, when this option is
3016 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3017 # This option is not active
3018 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3019 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3021 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3022 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3023 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3026 # Calculated value: 1
3031 # Accept exceptions and irq's occurring in user mode
3032 # For standalone Redboot based programs running in user mode.
3034 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3036 # No user value, uncomment the following line to provide one.
3038 # value_source default
3042 # Preserve svc spsr before returning to svc mode
3043 # This option secures exception and breakpoint processing
3044 # triggered during execution of application specific SWI
3047 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3049 # No user value, uncomment the following line to provide one.
3051 # value_source default
3057 cdl_option CYGBLD_LINKER_SCRIPT {
3058 # Calculated value: "src/arm.ld"
3060 # Current_value: src/arm.ld
3063 # Implementations of hal_arm_mem_real_region_top()
3065 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3066 # No options implement this inferface
3067 # This value cannot be modified here.
3072 # Freescale SoC architecture
3073 # This HAL variant package provides generic
3074 # support for the Freescale SoC. It is also
3075 # necessary to select a specific target platform HAL
3078 cdl_package CYGPKG_HAL_ARM_MX25 {
3079 # Packages cannot be added or removed, nor can their version be changed,
3080 # simply by editing their value. Instead the appropriate configuration
3081 # should be used to perform these actions.
3083 # This value cannot be modified here.
3085 # Current value: 1 current
3087 # The following properties are affected by this value
3092 # When this option is enabled, it indicates support
3093 # for Mobile DDR on the MX25 3stack CPU board. mDDR
3094 # was used on TO1.0 boards. Subsequent boards use
3097 cdl_option CYGHWR_MX25_MDDR {
3099 # No user value, uncomment the following line to provide one.
3101 # value_source default
3105 # Processor clock rate
3106 # The processor can run at various frequencies.
3107 # These values are expressed in KHz. Note that there are
3108 # several steppings of the rate to run at different
3109 # maximum frequencies. Check the specs to make sure that your
3110 # particular processor can run at the rate you select here.
3112 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3113 # This option is not active
3114 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3115 # CYG_HAL_STARTUP == ROMRAM
3119 # No user value, uncomment the following line to provide one.
3121 # value_source default
3122 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3123 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3124 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3125 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3127 # Legal values: 150000 200000
3130 # Real-time clock constants
3132 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3133 # There is no associated value.
3137 # Real-time clock numerator
3139 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3140 # Calculated value: 1000000000
3142 # Current_value: 1000000000
3145 # Real-time clock denominator
3146 # This option selects the heartbeat rate for the real-time clock.
3147 # The rate is specified in ticks per second. Change this value
3148 # with caution - too high and your system will become saturated
3149 # just handling clock interrupts, too low and some operations
3150 # such as thread scheduling may become sluggish.
3152 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3154 # No user value, uncomment the following line to provide one.
3156 # value_source default
3157 # Default value: 100
3159 # The following properties are affected by this value
3160 # option CYGNUM_HAL_RTC_PERIOD
3161 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3164 # Real-time clock period
3166 cdl_option CYGNUM_HAL_RTC_PERIOD {
3167 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3168 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3170 # Current_value: 36864
3174 # UART1 available as diagnostic/debug channel
3175 # The chip has multiple serial channels which may be
3176 # used for different things on different platforms. This
3177 # interface allows a platform to indicate that the specified
3178 # serial port can be used as a diagnostic and/or debug channel.
3180 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3181 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
3182 # This value cannot be modified here.
3186 # The following properties are affected by this value
3189 # UART2 available as diagnostic/debug channel
3190 # The chip has multiple serial channels which may be
3191 # used for different things on different platforms. This
3192 # interface allows a platform to indicate that the specified
3193 # serial port can be used as a diagnostic and/or debug channel.
3195 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3196 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
3197 # This value cannot be modified here.
3201 # The following properties are affected by this value
3204 # UART3 available as diagnostic/debug channel
3205 # The chip has multiple serial channels which may be
3206 # used for different things on different platforms. This
3207 # interface allows a platform to indicate that the specified
3208 # serial port can be used as a diagnostic and/or debug channel.
3210 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3211 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
3212 # This value cannot be modified here.
3216 # The following properties are affected by this value
3219 # UART4 available as diagnostic/debug channel
3220 # The chip has multiple serial channels which may be
3221 # used for different things on different platforms. This
3222 # interface allows a platform to indicate that the specified
3223 # serial port can be used as a diagnostic and/or debug channel.
3225 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3226 # Implemented by CYGPKG_HAL_ARM_TX25KARO, active, enabled
3227 # This value cannot be modified here.
3231 # The following properties are affected by this value
3234 # UART5 available as diagnostic/debug channel
3235 # The chip has multiple serial channels which may be
3236 # used for different things on different platforms. This
3237 # interface allows a platform to indicate that the specified
3238 # serial port can be used as a diagnostic and/or debug channel.
3240 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3241 # No options implement this inferface
3242 # This value cannot be modified here.
3248 # This HAL platform package provides generic
3249 # support for the Ka-Ro electronics TX25 module.
3251 cdl_package CYGPKG_HAL_ARM_TX25KARO {
3252 # Packages cannot be added or removed, nor can their version be changed,
3253 # simply by editing their value. Instead the appropriate configuration
3254 # should be used to perform these actions.
3256 # This value cannot be modified here.
3258 # Current value: 1 current
3259 # Requires: CYGINT_ISO_CTYPE
3260 # CYGINT_ISO_CTYPE == 1
3262 # Requires: CYGBLD_BUILD_REDBOOT == 1
3263 # CYGBLD_BUILD_REDBOOT == 1
3269 # The only startup type allowed is ROMRAM, since this will allow
3270 # the program to exist in ROM, but be copied to RAM during startup
3271 # which is required to boot from NAND flash.
3273 cdl_component CYG_HAL_STARTUP {
3275 # No user value, uncomment the following line to provide one.
3277 # value_source default
3278 # Default value: ROMRAM
3279 # Legal values: "ROMRAM"
3281 # The following properties are affected by this value
3282 # option CYGSEM_HAL_ROM_MONITOR
3283 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3284 # option CYGSEM_HAL_ROM_MONITOR
3285 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3286 # option CYGSEM_HAL_USE_ROM_MONITOR
3287 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3288 # option CYGSEM_HAL_USE_ROM_MONITOR
3289 # Requires: CYG_HAL_STARTUP == "RAM"
3290 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3291 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3292 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3293 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3294 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3295 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3296 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3297 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3298 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3299 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3300 # option CYGPRI_REDBOOT_ROM_MONITOR
3301 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3302 # option CYGPRI_REDBOOT_ROM_MONITOR
3303 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3306 # Diagnostic serial port baud rate
3307 # This option selects the baud rate used for the console port.
3308 # Note: this should match the value chosen for the GDB port if the
3309 # console and GDB port are the same.
3311 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3313 # No user value, uncomment the following line to provide one.
3315 # value_source default
3316 # Default value: 115200
3317 # Legal values: 9600 19200 38400 57600 115200
3320 # GDB serial port baud rate
3321 # This option selects the baud rate used for the GDB port.
3322 # Note: this should match the value chosen for the console port if the
3323 # console and GDB port are the same.
3325 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3327 # No user value, uncomment the following line to provide one.
3329 # value_source default
3330 # Default value: 115200
3331 # Legal values: 9600 19200 38400 57600 115200
3334 # Number of communication channels on the TX25
3336 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3337 # Calculated value: 3
3341 # The following properties are affected by this value
3342 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3343 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3344 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3345 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3346 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3347 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3351 # The TX25 provides access to three serial ports. This option
3352 # chooses which port will be used to connect to a host
3355 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3356 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3357 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3361 # No user value, uncomment the following line to provide one.
3363 # value_source default
3365 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3366 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3369 # Default console channel.
3371 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3372 # Calculated value: 0
3375 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3376 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3378 # The following properties are affected by this value
3379 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3380 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3383 # Console serial port
3384 # The TX25 provides access to three serial ports. This option
3385 # chooses which port will be used for console output.
3387 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3388 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3389 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3393 # No user value, uncomment the following line to provide one.
3395 # value_source default
3396 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3397 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3399 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3400 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3403 # Ka-Ro electronics TX25 module build options
3404 # Package specific build options including control over
3405 # compiler flags used only in building this package,
3406 # and details of which tests are built.
3408 cdl_component CYGPKG_HAL_ARM_TX25_OPTIONS {
3409 # There is no associated value.
3410 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3411 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3417 # This option specifies the SDRAM size of the TX25 module.
3419 cdl_option CYGNUM_HAL_ARM_TX25_SDRAM_SIZE {
3421 # No user value, uncomment the following line to provide one.
3422 # user_value 0x04000000
3423 # value_source default
3424 # Default value: 0x04000000
3425 # Legal values: 0x02000000 0x04000000 0x08000000
3428 # Enable low level debugging with LED
3429 # This option enables low level debugging by blink codes
3430 # of the LED on STK5.
3432 cdl_option CYGOPT_HAL_ARM_TX25_DEBUG {
3434 # No user value, uncomment the following line to provide one.
3436 # value_source default
3437 # Default value: false
3438 # false (unknown) == 0
3442 # Additional compiler flags
3443 # This option modifies the set of compiler flags for
3444 # building the TX25 HAL. These flags are used in addition
3445 # to the set of global flags.
3447 cdl_option CYGPKG_HAL_ARM_TX25_CFLAGS_ADD {
3449 # No user value, uncomment the following line to provide one.
3451 # value_source default
3455 # Suppressed compiler flags
3456 # This option modifies the set of compiler flags for
3457 # building the TX25 HAL. These flags are removed from
3458 # the set of global flags if present.
3460 cdl_option CYGPKG_HAL_ARM_TX25_CFLAGS_REMOVE {
3462 # No user value, uncomment the following line to provide one.
3464 # value_source default
3471 cdl_component CYGHWR_MEMORY_LAYOUT {
3472 # Calculated value: "arm_tx25_romram"
3474 # Current_value: arm_tx25_romram
3478 # Memory layout linker script fragment
3480 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3481 # Calculated value: "<pkgconf/mlt_arm_tx25_romram.ldi>"
3483 # Current_value: <pkgconf/mlt_arm_tx25_romram.ldi>
3486 # Memory layout header file
3488 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3489 # Calculated value: "<pkgconf/mlt_arm_tx25_romram.h>"
3491 # Current_value: <pkgconf/mlt_arm_tx25_romram.h>
3500 # Common types and useful macros.
3501 # Tracing and assertion facilities.
3502 # Package startup options.
3504 cdl_package CYGPKG_INFRA {
3505 # Packages cannot be added or removed, nor can their version be changed,
3506 # simply by editing their value. Instead the appropriate configuration
3507 # should be used to perform these actions.
3509 # This value cannot be modified here.
3511 # Current value: 1 current
3513 # The following properties are affected by this value
3514 # package CYGPKG_HAL
3515 # Requires: CYGPKG_INFRA
3516 # component CYGBLD_BUILD_REDBOOT
3517 # Requires: CYGPKG_INFRA
3522 # The eCos source code contains a significant amount of
3523 # internal debugging support, in the form of assertions and
3525 # Assertions check at runtime that various conditions are as
3526 # expected; if not, execution is halted.
3527 # Tracing takes the form of text messages that are output
3528 # whenever certain events occur, or whenever functions are
3530 # The most important property of these checks and messages is
3531 # that they are not required for the program to run.
3532 # It is prudent to develop software with assertions enabled,
3533 # but disable them when making a product release, thus
3534 # removing the overhead of that checking.
3535 # It is possible to enable assertions and tracing
3537 # There are also options controlling the exact behaviour of
3538 # the assertion and tracing facilities, thus giving users
3539 # finer control over the code and data size requirements.
3541 cdl_component CYGPKG_INFRA_DEBUG {
3543 # No user value, uncomment the following line to provide one.
3545 # value_source default
3548 # The following properties are affected by this value
3549 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3550 # ActiveIf: CYGPKG_INFRA_DEBUG
3555 # If this option is defined, asserts in the code are tested.
3556 # Assert functions (CYG_ASSERT()) are defined in
3557 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3558 # If it is not defined, these result in no additional
3559 # object code and no checking of the asserted conditions.
3561 cdl_component CYGDBG_USE_ASSERTS {
3562 # This option is not active
3563 # The parent CYGPKG_INFRA_DEBUG is disabled
3566 # No user value, uncomment the following line to provide one.
3568 # value_source default
3570 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3571 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3574 # The following properties are affected by this value
3575 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3576 # Requires: CYGDBG_USE_ASSERTS
3577 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3578 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3583 # This option allows individual control of preconditions.
3584 # A precondition is one type of assert, which it is
3585 # useful to control separately from more general asserts.
3586 # The function is CYG_PRECONDITION(condition,msg).
3588 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3589 # This option is not active
3590 # The parent CYGDBG_USE_ASSERTS is not active
3593 # No user value, uncomment the following line to provide one.
3595 # value_source default
3600 # This option allows individual control of postconditions.
3601 # A postcondition is one type of assert, which it is
3602 # useful to control separately from more general asserts.
3603 # The function is CYG_POSTCONDITION(condition,msg).
3605 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3606 # This option is not active
3607 # The parent CYGDBG_USE_ASSERTS is not active
3610 # No user value, uncomment the following line to provide one.
3612 # value_source default
3617 # This option allows individual control of loop invariants.
3618 # A loop invariant is one type of assert, which it is
3619 # useful to control separately from more general asserts,
3620 # particularly since a loop invariant is typically evaluated
3621 # a great many times when used correctly.
3622 # The function is CYG_LOOP_INVARIANT(condition,msg).
3624 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3625 # This option is not active
3626 # The parent CYGDBG_USE_ASSERTS is not active
3629 # No user value, uncomment the following line to provide one.
3631 # value_source default
3636 # All assertions within eCos contain a text message
3637 # which should give some information about the condition
3639 # These text messages will end up being embedded in the
3640 # application image and hence there is a significant penalty
3641 # in terms of image size.
3642 # It is possible to suppress the use of these messages by
3643 # disabling this option.
3644 # This results in smaller code size, but there is less
3645 # human-readable information if an assertion actually gets
3648 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3649 # This option is not active
3650 # The parent CYGDBG_USE_ASSERTS is not active
3653 # No user value, uncomment the following line to provide one.
3655 # value_source default
3661 # If this option is defined, tracing operations
3662 # result in output or logging, depending on other options.
3663 # This may have adverse effects on performance, if the time
3664 # taken to output message overwhelms the available CPU
3665 # power or output bandwidth.
3666 # Trace functions (CYG_TRACE()) are defined in
3667 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3668 # If it is not defined, these result in no additional
3669 # object code and no trace information.
3671 cdl_component CYGDBG_USE_TRACING {
3672 # This option is not active
3673 # The parent CYGPKG_INFRA_DEBUG is disabled
3676 # No user value, uncomment the following line to provide one.
3678 # value_source default
3680 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3681 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3684 # The following properties are affected by this value
3685 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3686 # ActiveIf: CYGDBG_USE_TRACING
3687 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3688 # ActiveIf: CYGDBG_USE_TRACING
3689 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3690 # ActiveIf: CYGDBG_USE_TRACING
3691 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3692 # ActiveIf: CYGDBG_USE_TRACING
3693 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3694 # ActiveIf: CYGDBG_USE_TRACING
3698 # Trace function reports
3699 # This option allows individual control of
3700 # function entry/exit tracing, independent of
3701 # more general tracing output.
3702 # This may be useful to remove clutter from a
3705 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3706 # This option is not active
3707 # The parent CYGDBG_USE_TRACING is not active
3708 # The parent CYGDBG_USE_TRACING is disabled
3711 # No user value, uncomment the following line to provide one.
3713 # value_source default
3718 # All trace calls within eCos contain a text message
3719 # which should give some information about the circumstances.
3720 # These text messages will end up being embedded in the
3721 # application image and hence there is a significant penalty
3722 # in terms of image size.
3723 # It is possible to suppress the use of these messages by
3724 # disabling this option.
3725 # This results in smaller code size, but there is less
3726 # human-readable information available in the trace output,
3727 # possibly only filenames and line numbers.
3729 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3730 # This option is not active
3731 # The parent CYGDBG_USE_TRACING is not active
3732 # The parent CYGDBG_USE_TRACING is disabled
3735 # No user value, uncomment the following line to provide one.
3737 # value_source default
3742 # Trace output implementations
3744 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3745 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3746 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3747 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3748 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3749 # This option is not active
3750 # The parent CYGPKG_INFRA_DEBUG is disabled
3752 # This value cannot be modified here.
3756 # The following properties are affected by this value
3757 # component CYGDBG_USE_ASSERTS
3758 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3759 # component CYGDBG_USE_TRACING
3760 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3764 # A null output module which is useful when
3765 # debugging interactively; the output routines
3766 # can be breakpointed rather than have them actually
3767 # 'print' something.
3769 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3770 # This option is not active
3771 # The parent CYGPKG_INFRA_DEBUG is disabled
3774 # No user value, uncomment the following line to provide one.
3776 # value_source default
3781 # An output module which produces simple output
3782 # from tracing and assertion events.
3784 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3785 # This option is not active
3786 # The parent CYGPKG_INFRA_DEBUG is disabled
3789 # No user value, uncomment the following line to provide one.
3791 # value_source default
3796 # An output module which produces fancy output
3797 # from tracing and assertion events.
3799 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3800 # This option is not active
3801 # The parent CYGPKG_INFRA_DEBUG is disabled
3804 # No user value, uncomment the following line to provide one.
3806 # value_source default
3811 # An output module which buffers output
3812 # from tracing and assertion events. The stored
3813 # messages are output when an assert fires, or
3814 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3816 # Of course, there will only be stored messages
3817 # if tracing per se (CYGDBG_USE_TRACING)
3820 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3821 # This option is not active
3822 # The parent CYGPKG_INFRA_DEBUG is disabled
3825 # No user value, uncomment the following line to provide one.
3827 # value_source default
3833 # The size of the trace buffer. This counts the number
3834 # of trace records stored. When the buffer fills it
3835 # either wraps, stops recording, or generates output.
3837 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3838 # This option is not active
3839 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3840 # ActiveIf constraint: CYGDBG_USE_TRACING
3841 # CYGDBG_USE_TRACING == 0
3845 # No user value, uncomment the following line to provide one.
3847 # value_source default
3849 # Legal values: 5 to 65535
3852 # Wrap trace buffer when full
3853 # When the trace buffer has filled with records it
3854 # starts again at the beginning. Hence only the last
3855 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3858 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3859 # This option is not active
3860 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3861 # ActiveIf constraint: CYGDBG_USE_TRACING
3862 # CYGDBG_USE_TRACING == 0
3866 # No user value, uncomment the following line to provide one.
3868 # value_source default
3872 # Halt trace buffer when full
3873 # When the trace buffer has filled with records it
3874 # stops recording. Hence only the first
3875 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3878 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3879 # This option is not active
3880 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3881 # ActiveIf constraint: CYGDBG_USE_TRACING
3882 # CYGDBG_USE_TRACING == 0
3886 # No user value, uncomment the following line to provide one.
3888 # value_source default
3892 # Print trace buffer when full
3893 # When the trace buffer has filled with records it
3894 # prints the contents of the buffer. The buffer is then
3895 # emptied and the system continues.
3897 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3898 # This option is not active
3899 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3900 # ActiveIf constraint: CYGDBG_USE_TRACING
3901 # CYGDBG_USE_TRACING == 0
3905 # No user value, uncomment the following line to provide one.
3907 # value_source default
3911 # Print trace buffer on assert fail
3912 # When an assertion fails the trace buffer will be
3913 # printed to the default diagnostic device.
3915 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3916 # This option is not active
3917 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3918 # ActiveIf constraint: CYGDBG_USE_TRACING
3919 # CYGDBG_USE_TRACING == 0
3923 # No user value, uncomment the following line to provide one.
3925 # value_source default
3930 # Use function names
3931 # All trace and assert calls within eCos contain a
3932 # reference to the builtin macro '__PRETTY_FUNCTION__',
3933 # which evaluates to a string containing
3934 # the name of the current function.
3935 # This is useful when reading a trace log.
3936 # It is possible to suppress the use of the function name
3937 # by disabling this option.
3938 # This results in smaller code size, but there is less
3939 # human-readable information available in the trace output,
3940 # possibly only filenames and line numbers.
3942 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
3943 # This option is not active
3944 # The parent CYGPKG_INFRA_DEBUG is disabled
3947 # No user value, uncomment the following line to provide one.
3949 # value_source default
3955 # Some packages require a startup routine to be called.
3956 # This can be carried out by application code, by supplying
3957 # a routine called cyg_package_start() which calls the
3958 # appropriate package startup routine(s).
3959 # Alternatively, this routine can be constructed automatically
3960 # and configured to call the startup routines of your choice.
3962 cdl_component CYGPKG_INFRA_STARTUP {
3963 # There is no associated value.
3967 # Start uITRON subsystem
3968 # Generate a call to initialize the
3969 # uITRON compatibility subsystem
3970 # within the system version of cyg_package_start().
3971 # This enables compatibility with uITRON.
3972 # You must configure uITRON with the correct tasks before
3973 # starting the uItron subsystem.
3974 # If this is disabled, and you want to use uITRON,
3975 # you must call cyg_uitron_start() from your own
3976 # cyg_package_start() or cyg_userstart().
3978 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
3979 # This option is not active
3980 # ActiveIf constraint: CYGPKG_UITRON
3981 # CYGPKG_UITRON (unknown) == 0
3985 # No user value, uncomment the following line to provide one.
3987 # value_source default
3989 # Requires: CYGPKG_UITRON
3990 # CYGPKG_UITRON (unknown) == 0
3995 # Smaller slower memcpy()
3996 # Enabling this option causes the implementation of
3997 # the standard memcpy() routine to reduce code
3998 # size at the expense of execution speed. This
3999 # option is automatically enabled with the use of
4000 # the -Os option to the compiler. Also note that
4001 # the compiler will try to use its own builtin
4002 # version of memcpy() if possible, ignoring the
4003 # implementation in this package, unless given
4004 # the -fno-builtin compiler option.
4006 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4008 # No user value, uncomment the following line to provide one.
4010 # value_source default
4014 # Smaller slower memset()
4015 # Enabling this option causes the implementation of
4016 # the standard memset() routine to reduce code
4017 # size at the expense of execution speed. This
4018 # option is automatically enabled with the use of
4019 # the -Os option to the compiler. Also note that
4020 # the compiler will try to use its own builtin
4021 # version of memset() if possible, ignoring the
4022 # implementation in this package, unless given
4023 # the -fno-builtin compiler option.
4025 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4027 # No user value, uncomment the following line to provide one.
4029 # value_source default
4033 # Provide empty C++ delete functions
4034 # To deal with virtual destructors, where the correct delete()
4035 # function must be called for the derived class in question, the
4036 # underlying delete is called when needed, from destructors. This
4037 # is regardless of whether the destructor is called by delete itself.
4038 # So there is a reference to delete() from all destructors. The
4039 # default builtin delete() attempts to call free() if there is
4040 # one defined. So, if you have destructors, and you have free(),
4041 # as in malloc() and free(), any destructor counts as a reference
4042 # to free(). So the dynamic memory allocation code is linked
4043 # in regardless of whether it gets explicitly called. This
4044 # increases code and data size needlessly.
4045 # To defeat this undesirable behaviour, we define empty versions
4046 # of delete and delete. But doing this prevents proper use
4047 # of dynamic memory in C++ programs via C++'s new and delete
4049 # Therefore, this option is provided
4050 # for explicitly disabling the provision of these empty functions,
4051 # so that new and delete can be used, if that is what is required.
4053 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4055 # No user value, uncomment the following line to provide one.
4057 # value_source default
4061 # Threshold for valid number of delete calls
4062 # Some users don't know about the empty delete function and then
4063 # wonder why their C++ classes are leaking memory. If
4064 # INFRA_DEBUG is enabled we keep a counter for the number of
4065 # times delete is called. If it goes above this threshold we throw
4066 # an assertion failure. This should point heavy users of
4067 # delete in the right direction without upsetting those who want
4068 # an empty delete function.
4070 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4071 # This option is not active
4072 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4073 # CYGPKG_INFRA_DEBUG == 0
4077 # No user value, uncomment the following line to provide one.
4079 # value_source default
4080 # Default value: 100
4083 # Provide dummy abort() function
4084 # This option controls the inclusion of a dummy abort() function.
4085 # Parts of the C and C++ compiler runtime systems contain references
4086 # to abort(), particulary in the C++ exception handling code. It is
4087 # not possible to eliminate these references, so this dummy function
4088 # in included to satisfy them. It is not expected that this function
4089 # will ever be called, so its current behaviour is to simply loop.
4091 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4093 # No user value, uncomment the following line to provide one.
4095 # value_source default
4096 # Default value: CYGINT_ISO_EXIT == 0
4097 # CYGINT_ISO_EXIT == 0
4099 # Requires: !CYGINT_ISO_EXIT
4100 # CYGINT_ISO_EXIT == 0
4104 # Reset platform at end of test case execution
4105 # If this option is set then test case programs will reset the platform
4106 # when they terminate, as opposed to the default which is to just hang
4109 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4111 # No user value, uncomment the following line to provide one.
4113 # value_source default
4117 # Provide dummy strlen() function
4118 # This option controls the inclusion of a dummy strlen() function.
4119 # Parts of the C and C++ compiler runtime systems contain references
4120 # to strlen(), particulary in the C++ exception handling code. It is
4121 # not possible to eliminate these references, so this dummy function
4122 # in included to satisfy them. While it is not expected that this function
4123 # will ever be called, it is functional but uses the simplest, smallest
4124 # algorithm. There is a faster version of strlen() in the C library.
4126 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4128 # No user value, uncomment the following line to provide one.
4130 # value_source default
4131 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4132 # CYGINT_ISO_STRING_STRFUNCS == 1
4134 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4135 # CYGINT_ISO_STRING_STRFUNCS == 1
4139 # Make all compiler warnings show as errors
4140 # Enabling this option will cause all compiler warnings to show
4141 # as errors and bring the library build to a halt. This is used
4142 # to ensure that the code base is warning free, and thus ensure
4143 # that newly introduced warnings stand out and get fixed before
4144 # they show up as weird run-time behavior.
4146 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4151 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4152 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4155 # The following properties are affected by this value
4156 # option CYGBLD_GLOBAL_CFLAGS
4157 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4160 # Make compiler and assembler communicate by pipe
4161 # Enabling this option will cause the compiler to feed the
4162 # assembly output the the assembler via a pipe instead of
4163 # via a temporary file. This normally reduces the build
4166 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4171 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4172 # CYGBLD_GLOBAL_CFLAGS == "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4176 # Infra build options
4177 # Package specific build options including control over
4178 # compiler flags used only in building this package.
4180 cdl_component CYGPKG_INFRA_OPTIONS {
4181 # There is no associated value.
4185 # Additional compiler flags
4186 # This option modifies the set of compiler flags for
4187 # building the eCos infra package. These flags are used
4188 # in addition to the set of global flags.
4190 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4192 # No user value, uncomment the following line to provide one.
4193 # user_value "-fno-rtti -Woverloaded-virtual"
4194 # value_source default
4195 # Default value: "-fno-rtti -Woverloaded-virtual"
4198 # Suppressed compiler flags
4199 # This option modifies the set of compiler flags for
4200 # building the eCos infra package. These flags are removed from
4201 # the set of global flags if present.
4203 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4205 # No user value, uncomment the following line to provide one.
4206 # user_value -Wno-pointer-sign
4207 # value_source default
4208 # Default value: -Wno-pointer-sign
4211 # Suppressed linker flags
4212 # This option modifies the set of linker flags for
4213 # building the eCos infra package tests. These flags are removed from
4214 # the set of global flags if present.
4216 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4218 # No user value, uncomment the following line to provide one.
4219 # user_value -Wl,--gc-sections
4220 # value_source default
4221 # Default value: -Wl,--gc-sections
4224 # Additional linker flags
4225 # This option modifies the set of linker flags for
4226 # building the eCos infra package tests. These flags are added to
4227 # the set of global flags if present.
4229 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4231 # No user value, uncomment the following line to provide one.
4232 # user_value -Wl,--fatal-warnings
4233 # value_source default
4234 # Default value: -Wl,--fatal-warnings
4237 # Infra package tests
4239 cdl_component CYGPKG_INFRA_TESTS {
4240 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4242 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4246 # Number of times a test runs
4247 # This option controls the number of times tests will execute their
4248 # basic function. Not all tests will honor this setting, but those
4249 # that do will execute the test N times before terminating. A value
4250 # less than 0 indicates to run forever.
4252 cdl_option CYGNUM_TESTS_RUN_COUNT {
4254 # No user value, uncomment the following line to provide one.
4256 # value_source default
4263 # Redboot ROM monitor
4264 # doc: ref/redboot.html
4265 # This package supports the Redboot [stand-alone debug monitor]
4266 # using eCos as the underlying board support mechanism.
4268 cdl_package CYGPKG_REDBOOT {
4269 # Packages cannot be added or removed, nor can their version be changed,
4270 # simply by editing their value. Instead the appropriate configuration
4271 # should be used to perform these actions.
4273 # This value cannot be modified here.
4275 # Current value: 1 current
4276 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4277 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4280 # The following properties are affected by this value
4281 # component CYGPKG_REDBOOT_ARM_OPTIONS
4282 # ActiveIf: CYGPKG_REDBOOT
4283 # component CYGPKG_REDBOOT_HAL_OPTIONS
4284 # ActiveIf: CYGPKG_REDBOOT
4285 # component CYGPKG_REDBOOT_HAL_TX25_OPTIONS
4286 # ActiveIf: CYGPKG_REDBOOT
4287 # option CYGSEM_IO_ETH_DRIVERS_WARN
4288 # ActiveIf: CYGPKG_REDBOOT
4292 # Include support for ELF file format
4294 cdl_component CYGSEM_REDBOOT_ELF {
4296 # No user value, uncomment the following line to provide one.
4298 # value_source default
4303 # Use the virtual address in the ELF headers
4304 # The ELF headers contain both a virtual and a physical address
4305 # for where code/data should be loaded. By default the physical
4306 # address is used but sometimes it is necassary to use the
4307 # virtual address because of bugy toolchains
4309 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4311 # No user value, uncomment the following line to provide one.
4313 # value_source default
4318 # Methods of loading images using redboot
4320 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4321 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4322 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4323 # This value cannot be modified here.
4327 # The following properties are affected by this value
4328 # component CYGBLD_BUILD_REDBOOT
4329 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4332 # Build Redboot ROM ELF image
4333 # This option enables the building of the Redboot ELF image.
4334 # The image may require further relocation or symbol
4335 # stripping before being converted to a binary image.
4336 # This is handled by a rule in the target CDL.
4338 cdl_component CYGBLD_BUILD_REDBOOT {
4340 # No user value, uncomment the following line to provide one.
4342 # The inferred value should not be edited directly.
4344 # value_source inferred
4346 # Requires: CYGPKG_INFRA
4347 # CYGPKG_INFRA == current
4349 # Requires: CYGPKG_ISOINFRA
4350 # CYGPKG_ISOINFRA == current
4352 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4353 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4355 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4356 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4358 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4359 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4361 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4362 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4364 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4365 # CYGINT_ISO_STRING_MEMFUNCS == 1
4367 # Requires: CYGINT_ISO_STRING_STRFUNCS
4368 # CYGINT_ISO_STRING_STRFUNCS == 1
4370 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4371 # CYGINT_REDBOOT_LOAD_METHOD == 2
4374 # The following properties are affected by this value
4375 # package CYGPKG_HAL_ARM_TX25KARO
4376 # Requires: CYGBLD_BUILD_REDBOOT == 1
4377 # option CYGBLD_BUILD_REDBOOT_BIN
4378 # ActiveIf: CYGBLD_BUILD_REDBOOT
4382 # Include GDB support in RedBoot
4383 # RedBoot normally includes support for the GDB debugging
4384 # protocols. This option allows this to be disabled which
4385 # may yield a substantial savings in terms of code and memory
4388 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4389 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4390 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4394 # No user value, uncomment the following line to provide one.
4396 # The inferred value should not be edited directly.
4398 # value_source inferred
4400 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4401 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4403 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4404 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4408 # Threads debugging support
4409 # Enabling this option will include special code in the
4410 # GDB stubs to support debugging of threaded programs. In
4411 # the case of eCos programs, this support allows GDB to
4412 # have complete access to the eCos threads in the
4415 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4416 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4417 # CYG_HAL_STARTUP == ROMRAM
4421 # No user value, uncomment the following line to provide one.
4423 # value_source default
4425 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4426 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4430 # Customized version string
4431 # Use this option to define a customized version "string" for
4432 # RedBoot. Note: this value is only cosmetic, displayed by the
4433 # "version" command, but is useful for providing site specific
4434 # information about the RedBoot configuration.
4436 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4438 # No user value, uncomment the following line to provide one.
4440 # The inferred value should not be edited directly.
4441 inferred_value 1 "Ka-Ro 2009-06-10"
4442 # value_source inferred
4443 # Default value: 0 0
4446 # Enable command line editing
4447 # If this option is non-zero, RedBoot will remember the
4448 # last N command lines. These lines may be reused.
4449 # Enabling this history will also enable rudimentary
4450 # editting of the lines themselves.
4452 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4454 # No user value, uncomment the following line to provide one.
4456 # value_source default
4459 # The following properties are affected by this value
4460 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4461 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4462 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4463 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4466 # Enable command line editing using ANSI arrows, etc
4467 # If this option is enabled, RedBoot will accept standard ANSI key
4468 # sequences for cursor movement (along with the emacs style keys).
4470 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4471 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4472 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4476 # No user value, uncomment the following line to provide one.
4478 # value_source default
4482 # Enable history command and expansion
4483 # Enabling this option will allow RedBoot to provide a
4484 # history command to list previous commands. Also enables
4485 # history expansion via '!' character similar to bash
4488 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4490 # No user value, uncomment the following line to provide one.
4492 # value_source default
4494 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4495 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4499 # Number of unique RAM segments on platform
4500 # Change this option to be the number of memory segments which are
4501 # supported by the platform. If the value is greater than 1, then
4502 # a platform specific function must provide information about the
4503 # additional segments.
4505 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4507 # No user value, uncomment the following line to provide one.
4509 # value_source default
4513 # Include support gzip/zlib decompression
4515 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4516 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4517 # CYGPKG_COMPRESS_ZLIB == current
4521 # No user value, uncomment the following line to provide one.
4523 # value_source default
4526 # The following properties are affected by this value
4527 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4528 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4532 # Size of zlib decompression buffer
4533 # This is the size of the buffer filled with incoming data
4534 # during load before calls are made to the decompressor
4535 # function. For ethernet downloads this can be made bigger
4536 # (at the cost of memory), but for serial downloads on slow
4537 # processors it may be necessary to reduce the size to
4538 # avoid serial overruns. zlib appears to bail out if less
4539 # than five bytes are available initially so this is the
4542 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4544 # No user value, uncomment the following line to provide one.
4546 # value_source default
4548 # Legal values: 5 to 256
4551 # Support compression of Flash images
4552 # This CDL indicates whether flash images can
4553 # be decompressed from gzip/zlib format into RAM.
4555 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4556 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4557 # CYGPKG_REDBOOT_FLASH == 1
4559 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4560 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4561 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4564 # Calculated value: 1
4569 # Include GZIP uncompress command
4570 # Enable this option to include a 'gunzip' command
4571 # to uncompress GZIP compressed data.
4573 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4575 # No user value, uncomment the following line to provide one.
4577 # value_source default
4581 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4582 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4584 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4586 # No user value, uncomment the following line to provide one.
4588 # The inferred value should not be edited directly.
4590 # value_source inferred
4593 # The following properties are affected by this value
4594 # option CYGPRI_REDBOOT_ZLIB_FLASH
4595 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4599 # Include support for xyzModem downloads
4600 # doc: ref/download-command.html
4602 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4604 # No user value, uncomment the following line to provide one.
4606 # value_source default
4609 # The following properties are affected by this value
4610 # option CYGPKG_REDBOOT_CFLAGS_ADD
4611 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4614 # Additional compiler flags
4615 # This option modifies the set of compiler flags for
4616 # building the eCos infra package. These flags are used
4617 # in addition to the set of global flags.
4619 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4620 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4621 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4625 # No user value, uncomment the following line to provide one.
4626 # user_value -Wno-inline
4627 # value_source default
4628 # Default value: -Wno-inline
4631 # Allow the load-command write into Flash.
4632 # Write images direct to Flash via the load command.
4633 # We assume anything which is invalid RAM is flash, hence
4634 # the requires statement
4636 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4637 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4638 # CYGPKG_REDBOOT_FLASH == 1
4642 # No user value, uncomment the following line to provide one.
4644 # value_source default
4646 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4647 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4651 # Include MS Windows CE support
4652 # doc: ref/wince.html
4653 # This option enables MS Windows CE EShell support
4654 # and Windows CE .BIN images support
4656 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4663 # Include support for MXC USB downloads
4665 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4667 # No user value, uncomment the following line to provide one.
4669 # value_source default
4673 # Include support for i.MX USB OTG downloads
4675 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4677 # No user value, uncomment the following line to provide one.
4679 # value_source default
4683 # Include POSIX checksum command
4684 # doc: ref/cksum-command.html
4686 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4688 # No user value, uncomment the following line to provide one.
4690 # value_source default
4694 # Include memory fill command
4695 # doc: ref/mfill-command.html
4697 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4699 # No user value, uncomment the following line to provide one.
4701 # value_source default
4705 # Include memory compare command
4706 # doc: ref/mcmp-command.html
4708 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4710 # No user value, uncomment the following line to provide one.
4712 # value_source default
4716 # Include memory copy command
4717 # doc: ref/mcopy-command.html
4719 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4721 # No user value, uncomment the following line to provide one.
4723 # value_source default
4727 # Include memory dump command
4728 # doc: ref/dump-command.html
4730 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4732 # No user value, uncomment the following line to provide one.
4734 # value_source default
4738 # Include cache command
4739 # doc: ref/cache-command.html
4741 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4743 # No user value, uncomment the following line to provide one.
4745 # value_source default
4749 # Include exec command
4750 # doc: ref/exec-command.html
4752 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4754 # No user value, uncomment the following line to provide one.
4756 # value_source default
4759 # The following properties are affected by this value
4760 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4761 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4764 # Include I/O Memory commands 'iopeek' and 'iopoke'
4766 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4768 # No user value, uncomment the following line to provide one.
4770 # value_source default
4774 # Granularity of timer/ticks
4775 # This option controls the granularity of the timers.
4776 # Faster CPUs can afford higher granularity (lower values)
4777 # which should give higher network performance since the stack
4780 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4782 # No user value, uncomment the following line to provide one.
4784 # value_source default
4785 # Default value: 250
4786 # Legal values: 10 25 50 100 250 500 1000
4789 # Redboot Networking
4790 # This option includes networking support in RedBoot.
4792 cdl_component CYGPKG_REDBOOT_NETWORKING {
4793 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4794 # CYGPKG_IO_ETH_DRIVERS == current
4798 # No user value, uncomment the following line to provide one.
4800 # value_source default
4803 # The following properties are affected by this value
4804 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4805 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4809 # Print net debug information
4810 # This option is overriden by the configuration stored
4813 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4815 # No user value, uncomment the following line to provide one.
4817 # value_source default
4821 # Support TFTP for download
4822 # This option enables the use of the TFTP protocol for
4825 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4827 # No user value, uncomment the following line to provide one.
4829 # value_source default
4833 # Support HTTP for download
4834 # This option enables the use of the HTTP protocol for
4837 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4844 # Default IP address
4845 # This IP address is the default used by RedBoot if
4846 # a BOOTP/DHCP server does not respond. The numbers
4847 # should be separated by *commas*, and not dots. If
4848 # an IP address is configured into the Flash
4849 # configuration, that will be used in preference.
4851 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4853 # No user value, uncomment the following line to provide one.
4855 # value_source default
4856 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4857 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4862 # Do not try to use BOOTP
4863 # By default Redboot tries to use BOOTP to get an IP
4864 # address. If there's no BOOTP server on your network
4865 # use this option to avoid to wait until the
4866 # timeout. This option is overriden by the
4867 # configuration stored in flash.
4869 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4870 # This option is not active
4871 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4874 # No user value, uncomment the following line to provide one.
4876 # value_source default
4880 # Default bootp server
4881 # This IP address is the default server
4882 # address used by RedBoot if a BOOTP/DHCP
4883 # server does not respond. The numbers should
4884 # be separated by *commas*, and not dots. If
4885 # an IP address is configured into the Flash
4886 # configuration, that will be used in
4889 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4890 # This option is not active
4891 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4894 # No user value, uncomment the following line to provide one.
4896 # value_source default
4897 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4898 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4903 # Use DHCP to get IP information
4904 # Use DHCP protocol to obtain pertinent IP addresses, such
4905 # as the client, server, gateway, etc.
4907 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4909 # No user value, uncomment the following line to provide one.
4911 # value_source default
4914 # The following properties are affected by this value
4915 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4916 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4919 # Use a gateway for non-local IP traffic
4920 # Enabling this option will allow the RedBoot networking
4921 # stack to use a [single] gateway to reach a non-local
4922 # IP address. If disabled, RedBoot will only be able to
4923 # reach nodes on the same subnet.
4925 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4927 # No user value, uncomment the following line to provide one.
4929 # value_source default
4931 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4932 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4937 # Default gateway IP address
4938 # This IP address is the default used by RedBoot
4939 # if a BOOTP/DHCP server does not respond. The
4940 # numbers should be separated by *commas*, and
4941 # not dots. If an IP address is configured into
4942 # the Flash configuration, that will be used in
4945 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
4947 # No user value, uncomment the following line to provide one.
4949 # value_source default
4950 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4951 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4955 # Default IP address mask
4956 # This IP address mask is the default used by
4957 # RedBoot if a BOOTP/DHCP server does not
4958 # respond. The numbers should be separated by
4959 # *commas*, and not dots. If an IP address is
4960 # configured into the Flash configuration, that
4961 # will be used in preference.
4963 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
4965 # No user value, uncomment the following line to provide one.
4967 # value_source default
4968 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
4969 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4974 # TCP port to listen for incoming connections
4975 # RedBoot will 'listen' on this port for incoming TCP
4976 # connections. This allows outside connections to be made
4977 # to the platform, either for GDB or RedBoot commands.
4979 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
4981 # No user value, uncomment the following line to provide one.
4983 # value_source default
4984 # Default value: 9000
4987 # Number of [network] packet buffers
4988 # RedBoot may need to buffer network data to support
4989 # various connections. This option allows control
4990 # over the number of such buffered packets, and in
4991 # turn, controls the amount of memory used by RedBoot
4992 # (which is not available to user applications).
4993 # Each packet buffer takes up about 1514 bytes.
4994 # Note: there is little need to make this larger than
4997 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
4999 # No user value, uncomment the following line to provide one.
5001 # value_source default
5003 # Legal values: 3 to 8
5007 # When this option is enabled, RedBoot will be built with
5008 # support for DNS, allowing use of hostnames on the command
5011 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5012 # This option is not active
5013 # ActiveIf constraint: CYGPKG_NS_DNS
5014 # CYGPKG_NS_DNS (unknown) == 0
5018 # No user value, uncomment the following line to provide one.
5020 # value_source default
5022 # Requires: !CYGPKG_NS_DNS_BUILD
5023 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5029 # This option sets the IP of the default DNS. The IP can be
5030 # changed at runtime as well.
5032 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5033 # This option is not active
5034 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5035 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5036 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5040 # No user value, uncomment the following line to provide one.
5041 # user_value 0.0.0.0
5042 # value_source default
5043 # Default value: 0.0.0.0
5046 # Timeout in DNS lookup
5047 # This option sets the timeout used when looking up an
5048 # address via the DNS. Default is 10 seconds.
5050 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5051 # This option is not active
5052 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5055 # No user value, uncomment the following line to provide one.
5057 # value_source default
5061 # Support the use of a domain name
5062 # This option controls if Redboot supports domain
5063 # names when performing DNS lookups
5065 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5066 # This option is not active
5067 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5070 # No user value, uncomment the following line to provide one.
5072 # value_source default
5077 # Default DNS domain
5078 # This option sets the default DNS domain name.
5079 # This value will be overwritten by the value in
5080 # flash or a domain returned by DHCP
5082 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5083 # This option is not active
5084 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5085 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5088 # No user value, uncomment the following line to provide one.
5090 # value_source default
5091 # Default value: 0 0
5094 # Get DNS domain from Flash
5095 # This option enables getting the domain name
5096 # from the flash configuration. This can later be
5097 # overwritten by a value learnt from DHCP
5099 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5100 # This option is not active
5101 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5102 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5103 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5104 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5108 # No user value, uncomment the following line to provide one.
5110 # value_source default
5114 # Use DNS domain from DHCP
5115 # This option enables the use of the domain name
5118 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5119 # This option is not active
5120 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5121 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5124 # No user value, uncomment the following line to provide one.
5126 # value_source default
5130 # BOOTP/DHCP DNS domain buffer size
5131 # This options sets the size of the static
5132 # buffer used by BOOTP/DHCP to store the DNS
5133 # domain name. The domain name will not be
5134 # set if the buffer is too small to hold it.
5136 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5137 # This option is not active
5138 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5139 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5142 # No user value, uncomment the following line to provide one.
5144 # value_source default
5150 # Default network device driver
5151 # This is the name of the default network device to use.
5153 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5154 # This option is not active
5155 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5156 # CYGHWR_NET_DRIVERS == 1
5160 # No user value, uncomment the following line to provide one.
5162 # value_source default
5163 # Default value: "\"\""
5166 # Initialize only one net device
5167 # This option tells RedBoot to stop initializing network
5168 # devices when it finds the first device which is
5169 # successfully initialized. The default behavior causes
5170 # all network devices to be initialized.
5172 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5173 # This option is not active
5174 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5175 # CYGHWR_NET_DRIVERS == 1
5179 # No user value, uncomment the following line to provide one.
5181 # value_source default
5186 # Let RedBoot use any I/O channel for its console.
5187 # If this option is enabled then RedBoot will attempt to use all
5188 # defined serial I/O channels for its console device. Once input
5189 # arrives at one of these channels then the console will use only
5192 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5194 # No user value, uncomment the following line to provide one.
5196 # The inferred value should not be edited directly.
5198 # value_source inferred
5202 # Let RedBoot adjust the baud rate of the serial console.
5203 # If this option is enabled then RedBoot will support commands
5204 # to set and query the baud rate on the selected console.
5206 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5207 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5208 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5212 # No user value, uncomment the following line to provide one.
5214 # value_source default
5218 # Run a platform specific startup function.
5219 # If this option is enabled then RedBoot will execute a platform
5220 # specific startup function before entering into its command line
5221 # processing. This allows the platform to perform any special
5222 # setups before RedBoot actually starts running. Note: the entire
5223 # RedBoot environment will already be initialized at this point.
5225 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5227 # No user value, uncomment the following line to provide one.
5229 # value_source default
5233 # Run a platform specific ESA validation function.
5234 # If this option is enabled then RedBoot will execute a platform
5235 # specific function to validate an ethernet ESA. This would be
5236 # useful if the address must conform to standards set by the
5237 # hardware manufacturer, etc.
5239 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5241 # No user value, uncomment the following line to provide one.
5243 # The inferred value should not be edited directly.
5245 # value_source inferred
5248 # The following properties are affected by this value
5249 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5250 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5251 # option CYGDAT_DEVS_ETH_ARM_TX25KARO_OUI
5252 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5255 # Maximum command line length
5256 # This option allows control over how long the CLI command line
5257 # should be. This space will be allocated statically
5258 # rather than from RedBoot's stack.
5260 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5262 # No user value, uncomment the following line to provide one.
5264 # The inferred value should not be edited directly.
5266 # value_source inferred
5267 # Default value: 256
5270 # Command processing idle timeout (ms)
5271 # This option controls the timeout period before the
5272 # command processing is considered 'idle'. Making this
5273 # number smaller will cause idle processing to take place
5274 # more often, etc. The default value of 10ms is a reasonable
5275 # tradeoff between responsiveness and overhead.
5277 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5279 # No user value, uncomment the following line to provide one.
5281 # value_source default
5285 # Validate RAM addresses during load
5286 # This option controls whether or not RedBoot will make
5287 # sure that memory being used by the "load" command is
5288 # in fact in user RAM. Leaving the option enabled makes
5289 # for a safer environment, but this check may not be valid
5290 # on all platforms, thus the ability to disable it.
5291 # ** Disable this only with great care **
5293 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5295 # No user value, uncomment the following line to provide one.
5297 # value_source default
5300 # The following properties are affected by this value
5301 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5302 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5305 # Allow RedBoot to support FLASH programming
5306 # If this option is enabled then RedBoot will provide commands
5307 # to manage images in FLASH memory. These images can be loaded
5308 # into memory for execution or executed in place.
5310 cdl_component CYGPKG_REDBOOT_FLASH {
5311 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5312 # CYGHWR_IO_FLASH_DEVICE == 1
5316 # No user value, uncomment the following line to provide one.
5318 # value_source default
5321 # The following properties are affected by this value
5322 # option CYGPRI_REDBOOT_ZLIB_FLASH
5323 # ActiveIf: CYGPKG_REDBOOT_FLASH
5324 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5325 # ActiveIf: CYGPKG_REDBOOT_FLASH
5329 # Byte order used to store info in flash.
5330 # This option controls the byte ordering used to store
5331 # the FIS directory info and flash config info.
5333 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5335 # No user value, uncomment the following line to provide one.
5336 # user_value NATURAL
5337 # value_source default
5338 # Default value: NATURAL
5339 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5342 # RedBoot Flash Image System support
5343 # doc: ref/flash-image-system.html
5344 # This option enables the Flash Image System commands
5345 # and support within RedBoot. If disabled, simple Flash
5346 # access commands such as "fis write" will still exist.
5347 # This option would be disabled for targets that need simple
5348 # FLASH manipulation, but do not have the need or space for
5349 # complete image management.
5351 cdl_option CYGOPT_REDBOOT_FIS {
5353 # No user value, uncomment the following line to provide one.
5355 # value_source default
5358 # The following properties are affected by this value
5359 # component CYGPKG_REDBOOT_FIS_CONTENTS
5360 # ActiveIf: CYGOPT_REDBOOT_FIS
5361 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5362 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5363 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5364 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5367 # Max number of chunks of free space to manage
5368 # If this option is defined then "fis free" will
5369 # rely on the FIS directory to determine what space is
5370 # free within the FLASH. This option controls the
5371 # maximum number of free segment which can be handled
5372 # (typically this number is small). If this option is
5373 # not enabled, the the archaic behaviour of actually
5374 # scanning the FLASH for erased sectors (unreliable)
5375 # will be used to determine what's free and what's
5378 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5380 # No user value, uncomment the following line to provide one.
5382 # value_source default
5383 # Default value: 1 32
5386 # Flash Image System default directory contents
5388 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5389 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5390 # CYGOPT_REDBOOT_FIS == 1
5393 # Calculated value: 1
5399 # Flash block containing the Directory
5400 # Which block of flash should hold the directory
5401 # information. Positive numbers are absolute block
5402 # numbers. Negative block numbers count backwards
5403 # from the last block. eg 2 means block 2, -2
5404 # means the last but one block.
5406 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5408 # No user value, uncomment the following line to provide one.
5410 # value_source default
5413 # The following properties are affected by this value
5414 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5415 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5416 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5419 # Redundant Flash Image System Directory Support
5420 # This option enables the use of a redundant FIS
5421 # directory within RedBoot. If enabled a flash block
5422 # will be reserved for a second copy of the fis
5423 # directory. Doing this allow for power failure safe
5424 # updates of the directory by the application.
5426 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5428 # No user value, uncomment the following line to provide one.
5430 # value_source default
5432 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5433 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5438 # Flash block containing the backup Directory
5439 # Which block of flash should hold the redundant
5440 # directory information. Positive numbers are
5441 # absolute block numbers. Negative block numbers
5442 # count backwards from the last block. eg 2 means
5443 # block 2, -2 means the last but one block.
5445 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5446 # This option is not active
5447 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5450 # No user value, uncomment the following line to provide one.
5452 # value_source default
5454 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5455 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5456 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5457 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5460 # The following properties are affected by this value
5461 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5462 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5463 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5467 # Pseudo-file to describe reserved area
5468 # If an area of FLASH is reserved, it is informative to
5469 # have a fis entry describing it. This option controls
5470 # creation of such an entry by default in the fis init
5473 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5474 # This option is not active
5475 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5476 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5480 # No user value, uncomment the following line to provide one.
5482 # value_source default
5486 # File to describe RedBoot boot image
5487 # Normally a ROM-startup RedBoot image is first in the
5488 # FLASH, and the system boots using that image. This
5489 # option controls creation of an entry describing it in
5490 # the fis init command. It might be disabled if a
5491 # platform has an immutable boot image of its own, where
5492 # we use a POST-startup RedBoot instead, which performs
5493 # less board initialization.
5495 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5497 # No user value, uncomment the following line to provide one.
5499 # value_source default
5502 # The following properties are affected by this value
5503 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5504 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5505 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5506 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5509 # File to describe RedBoot POST-compatible image
5510 # This option controls creation of an entry describing a
5511 # POST-startup RedBoot image in the fis init command.
5512 # Not all platforms support POST-startup. A platform
5513 # might have both for testing purposes, where the
5514 # eventual user would substitute their own POST code for
5515 # the initial ROM-startup RedBoot, and then jump to the
5516 # POST-compatible RedBoot immediately following.
5518 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5520 # No user value, uncomment the following line to provide one.
5522 # value_source default
5523 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5524 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5529 # Offset of POST image from FLASH start
5530 # This option specifies the offset for a POST image from
5531 # the start of FLASH. If unset, then the fis entry
5532 # describing the POST image will be placed where
5535 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5536 # This option is not active
5537 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5540 # No user value, uncomment the following line to provide one.
5542 # value_source default
5543 # Default value: 0 0
5544 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5545 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5546 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5549 # The following properties are affected by this value
5550 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5551 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5555 # File to describe RedBoot backup image
5556 # This option controls creation of an entry describing a
5557 # backup RedBoot image in the fis init command.
5558 # Conventionally a RAM-startup RedBoot image is kept
5559 # under this name for use in updating the ROM-based
5560 # RedBoot that boots the board.
5562 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5564 # No user value, uncomment the following line to provide one.
5566 # value_source default
5570 # Include ARM SIB ID in FIS
5571 # If set, this option will cause the last 5 words of
5572 # the FIS to include the special ID needed for the
5573 # flash to be recognized as a reserved area for RedBoot
5574 # by an ARM BootRom monitor.
5576 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5578 # No user value, uncomment the following line to provide one.
5580 # value_source default
5584 # Size of FIS directory entry
5585 # The FIS directory is limited to one single flash
5586 # sector. If your flash has tiny sectors, you may wish
5587 # to reduce this value in order to get more slots in
5588 # the FIS directory.
5590 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5592 # No user value, uncomment the following line to provide one.
5594 # value_source default
5595 # Default value: 256
5598 # Number of FIS directory entries
5599 # The FIS directory normally occupies a single flash
5600 # sector. Adjusting this value can allow for more than
5601 # one flash sector to be used, which is useful if your
5602 # sectors are very small.
5604 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5606 # No user value, uncomment the following line to provide one.
5608 # value_source default
5612 # Maximum RedBoot image size
5613 # This option controls the maximum length reserved
5614 # for the RedBoot boot image in the FIS table.
5615 # This should be a multiple of the flash's erase
5618 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5620 # No user value, uncomment the following line to provide one.
5621 # user_value 0x00020000
5622 # The inferred value should not be edited directly.
5623 inferred_value 0x00040000
5624 # value_source inferred
5625 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5626 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5630 # Offset from start of FLASH to RedBoot boot image
5631 # This option controls where the RedBoot boot image is
5632 # located relative to the start of FLASH.
5634 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5636 # No user value, uncomment the following line to provide one.
5638 # value_source default
5639 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5640 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5642 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5643 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5644 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5647 # The following properties are affected by this value
5648 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5649 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5650 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5651 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5652 # component CYGPKG_HAL_ARM_TX25_OPTIONS
5653 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5656 # Size of reserved area at start of FLASH
5657 # This option reserves an area at the start of
5658 # FLASH where RedBoot will never interfere; it is
5659 # expected that this area contains
5660 # (non-RedBoot-based) POST code or some other boot
5661 # monitor that executes before RedBoot.
5663 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5665 # No user value, uncomment the following line to provide one.
5667 # value_source default
5670 # The following properties are affected by this value
5671 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5672 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5673 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5674 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5675 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5676 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5680 # Keep all RedBoot FLASH data blocks locked.
5681 # When this option is enabled, RedBoot will keep configuration
5682 # data and the FIS directory blocks implicitly locked. While
5683 # this is somewhat safer, it does add overhead during updates.
5685 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5686 # This option is not active
5687 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5688 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5692 # No user value, uncomment the following line to provide one.
5694 # value_source default
5698 # Use CRC checksums on FIS images.
5699 # When this option is enabled, RedBoot will use CRC checksums
5700 # when reading and writing flash images.
5702 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5704 # No user value, uncomment the following line to provide one.
5706 # The inferred value should not be edited directly.
5708 # value_source inferred
5712 # ARM FLASH drivers support SIB flash block structure
5713 # This interface is implemented by a flash driver
5714 # to indicate that it supports the ARM SIB flash
5717 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5718 # No options implement this inferface
5719 # ActiveIf constraint: CYGPKG_HAL_ARM
5720 # CYGPKG_HAL_ARM == current
5723 # This value cannot be modified here.
5727 # The following properties are affected by this value
5728 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5729 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5732 # Use ARM SIB flash block structure
5733 # This option is used to interpret ARM Flash System
5734 # information blocks.
5736 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5737 # This option is not active
5738 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5739 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5743 # No user value, uncomment the following line to provide one.
5745 # value_source default
5750 # Keep RedBoot configuration data in FLASH
5751 # When this option is enabled, RedBoot will keep configuration
5752 # data in a separate block of FLASH memory. This data will
5753 # include such items as the node IP address or startup scripts.
5755 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5757 # No user value, uncomment the following line to provide one.
5759 # value_source default
5760 # Default value: CYGPKG_IO_FLASH != 0
5761 # CYGPKG_IO_FLASH == current
5764 # The following properties are affected by this value
5765 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5766 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5767 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5768 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5769 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5770 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5771 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5772 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5773 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5774 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5775 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5776 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5777 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5778 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5782 # Length of configuration data in FLASH
5783 # This option is used to control the amount of memory and FLASH
5784 # to be used for configuration options (persistent storage).
5786 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5788 # No user value, uncomment the following line to provide one.
5790 # value_source default
5791 # Default value: 4096
5794 # Style of media used for persistent data storage
5795 # Persistent data storage can either be held in 'norma' FLASH
5796 # or some other device (represented by the 'EEPROM' choice).
5797 # The different styles utilize different access methods.
5799 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5801 # No user value, uncomment the following line to provide one.
5803 # value_source default
5804 # Default value: FLASH
5805 # Legal values: "FLASH" "EEPROM"
5807 # The following properties are affected by this value
5808 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5809 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5810 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5811 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5814 # Merged config data and FIS directory
5815 # If this option is set, then the FIS directory and FLASH
5816 # configuration database will be stored in the same physical
5819 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5820 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5821 # CYGOPT_REDBOOT_FIS == 1
5822 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5826 # No user value, uncomment the following line to provide one.
5828 # value_source default
5831 # The following properties are affected by this value
5832 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5833 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5836 # Which block of flash to use
5837 # Which block of flash should hold the configuration
5838 # information. Positive numbers are absolute block numbers.
5839 # Negative block numbers count backwards from the last block.
5840 # eg 2 means block 2, -2 means the last but one block.
5842 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5844 # No user value, uncomment the following line to provide one.
5846 # value_source default
5850 # Support simple macros/aliases in FLASH
5851 # This option is used to allow support for simple text-based
5852 # macros (aliases). These aliases are kept in the FLASH
5853 # configuration data (persistent storage).
5855 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5857 # No user value, uncomment the following line to provide one.
5859 # value_source default
5863 # Length of strings in FLASH configuration data
5864 # This option is used to control the amount of memory
5865 # and FLASH to be used for string configuration
5866 # options (persistent storage).
5868 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5870 # No user value, uncomment the following line to provide one.
5872 # value_source default
5873 # Default value: 128
5876 # Length of configuration script(s) in FLASH
5877 # This option is used to control the amount of memory and
5878 # FLASH to be used for configuration options (persistent
5881 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5883 # No user value, uncomment the following line to provide one.
5885 # The inferred value should not be edited directly.
5887 # value_source inferred
5888 # Default value: 512
5891 # Fallback to read-only FLASH configuration
5892 # This option will cause the configuration information to
5893 # revert to the readonly information stored in the FLASH.
5894 # The option only takes effect after
5895 # 1) the config_ok flag has been set to be true,
5896 # indicating that at one time the copy in RAM was valid;
5898 # 2) the information in RAM has been verified to be invalid
5900 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5902 # No user value, uncomment the following line to provide one.
5904 # value_source default
5905 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5906 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5911 # Allow RedBoot to support fileio
5912 # If this option is enabled then RedBoot will provide commands
5913 # to load files from fileio file systems such as JFFS2.
5915 cdl_component CYGPKG_REDBOOT_FILEIO {
5916 # This option is not active
5917 # ActiveIf constraint: CYGPKG_IO_FILEIO
5918 # CYGPKG_IO_FILEIO (unknown) == 0
5922 # No user value, uncomment the following line to provide one.
5924 # value_source default
5927 # The following properties are affected by this value
5928 # option CYGNUM_REDBOOT_GETC_BUFFER
5929 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5933 # Include an ls command
5934 # If this option is enabled a simple ls command will be
5935 # included in redboot so the contents of a directory
5938 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5939 # This option is not active
5940 # The parent CYGPKG_REDBOOT_FILEIO is not active
5943 # No user value, uncomment the following line to provide one.
5945 # value_source default
5950 # Allow RedBoot to support disks
5951 # If this option is enabled then RedBoot will provide commands
5952 # to load disk files.
5954 cdl_component CYGPKG_REDBOOT_DISK {
5962 # Include Redboot commands for disk access
5964 cdl_option CYGSEM_REDBOOT_DISK {
5965 # This option is not active
5966 # The parent CYGPKG_REDBOOT_DISK is disabled
5969 # No user value, uncomment the following line to provide one.
5971 # value_source default
5972 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
5973 # CYGINT_REDBOOT_DISK_DRIVERS == 0
5977 # Hardware drivers for disk-type devices
5979 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
5980 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
5981 # This option is not active
5982 # The parent CYGPKG_REDBOOT_DISK is disabled
5984 # This value cannot be modified here.
5988 # The following properties are affected by this value
5989 # option CYGSEM_REDBOOT_DISK
5990 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
5993 # Maximum number of supported disks
5994 # This option controls the number of disks supported by
5997 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
5998 # This option is not active
5999 # The parent CYGPKG_REDBOOT_DISK is disabled
6002 # No user value, uncomment the following line to provide one.
6004 # value_source default
6008 # Maximum number of partitions per disk
6009 # This option controls the maximum number of supported
6010 # partitions per disk.
6012 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6013 # This option is not active
6014 # The parent CYGPKG_REDBOOT_DISK is disabled
6017 # No user value, uncomment the following line to provide one.
6019 # value_source default
6023 # Support IDE disks.
6024 # When this option is enabled, RedBoot will support IDE disks.
6026 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6027 # This option is not active
6028 # The parent CYGPKG_REDBOOT_DISK is disabled
6029 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6030 # CYGINT_HAL_PLF_IF_IDE == 0
6034 # No user value, uncomment the following line to provide one.
6036 # value_source default
6041 # Work with VMware virtual disks
6042 # This option controls the disk driver behavior at
6045 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6046 # This option is not active
6047 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6050 # No user value, uncomment the following line to provide one.
6052 # value_source default
6057 # Support Linux second extended filesystems.
6058 # When this option is enabled, RedBoot will support EXT2
6061 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6062 # This option is not active
6063 # The parent CYGPKG_REDBOOT_DISK is disabled
6066 # No user value, uncomment the following line to provide one.
6068 # value_source default
6072 # Support ISO9660 filesystems.
6073 # When this option is enabled, RedBoot will support ISO9660
6076 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6077 # This option is not active
6078 # The parent CYGPKG_REDBOOT_DISK is disabled
6080 # Calculated value: 0
6087 # doc: ref/persistent-state-flash.html
6088 # This contains options related to RedBoot's boot script
6091 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6092 # There is no associated value.
6096 # Boot scripting enabled
6097 # This option controls whether RedBoot boot script
6098 # functionality is enabled.
6100 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6101 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6102 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6103 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6106 # Calculated value: 1
6111 # Use default RedBoot boot script
6112 # If enabled, this option will tell RedBoot to use the
6113 # value of this option as a default boot script.
6115 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6117 # No user value, uncomment the following line to provide one.
6119 # value_source default
6120 # Default value: 0 0
6122 # The following properties are affected by this value
6123 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6124 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6127 # Resolution (in ms) for script timeout value.
6128 # This option controls the resolution of the script
6129 # timeout. The value is specified in milliseconds
6130 # (ms), thus to have the script timeout be defined in
6131 # terms of tenths of seconds, use 100.
6133 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6135 # No user value, uncomment the following line to provide one.
6137 # The inferred value should not be edited directly.
6139 # value_source inferred
6140 # Default value: 1000
6143 # Script default timeout value
6144 # This option is used to set the default timeout for startup
6145 # scripts, when they are enabled.
6147 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6149 # No user value, uncomment the following line to provide one.
6151 # The inferred value should not be edited directly.
6153 # value_source inferred
6158 # Support RTC for time & date functions
6159 # When this option is enabled, RedBoot will support commands to
6160 # query and set the real time clock (time and date)
6162 cdl_option CYGSEM_REDBOOT_RTC {
6163 # This option is not active
6164 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6165 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6169 # No user value, uncomment the following line to provide one.
6171 # value_source default
6175 # Behave like a ROM monitor
6176 # Enabling this option will allow RedBoot to provide ROM
6177 # monitor-style services to programs which it executes.
6179 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6180 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6181 # CYG_HAL_STARTUP == ROMRAM
6182 # CYG_HAL_STARTUP == ROMRAM
6185 # Calculated value: 1
6188 # Requires: CYGSEM_HAL_ROM_MONITOR
6189 # CYGSEM_HAL_ROM_MONITOR == 1
6193 # Allow RedBoot to handle GNUPro application 'syscalls'.
6194 # If this option is enabled then RedBoot will install a
6195 # syscall handler to support debugging of applications
6196 # based on GNUPro newlib/bsp.
6198 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6200 # No user value, uncomment the following line to provide one.
6202 # value_source default
6205 # The following properties are affected by this value
6206 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6207 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6208 # option CYGPKG_HAL_GDB_FILEIO
6209 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6213 # Support additional syscalls for 'gprof' profiling
6214 # Support additional syscalls to support a periodic callback
6215 # function for histogram-style profiling, and an enquire/set
6217 # The application must use the GNUPro newlib facilities
6220 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6221 # This option is not active
6222 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6223 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6224 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6228 # No user value, uncomment the following line to provide one.
6230 # value_source default
6234 # Does the HAL support 'gprof' profiling?
6236 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6237 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6238 # This option is not active
6239 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6241 # This value cannot be modified here.
6245 # The following properties are affected by this value
6246 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6247 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6250 # Do not raise SIGTRAP when program exits
6251 # For some (single shot) newlib based programs,
6252 # exiting and returning a termination status may be
6253 # the normal expected behavior.
6255 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6256 # This option is not active
6257 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6260 # No user value, uncomment the following line to provide one.
6262 # value_source default
6267 # Use a common buffer for Zlib and FIS
6268 # Use a common memory buffer for both the zlib workspace
6269 # and FIS directory operations. This can save a substantial
6270 # amount of RAM, especially when flash sectors are large.
6272 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6273 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6274 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6275 # CYGOPT_REDBOOT_FIS == 1
6279 # No user value, uncomment the following line to provide one.
6281 # value_source default
6286 # Size of Zlib/FIS common buffer
6287 # Size of common buffer to allocate. Must be at least the
6288 # size of one flash sector.
6290 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6291 # This option is not active
6292 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6295 # No user value, uncomment the following line to provide one.
6296 # user_value 0x0000C000
6297 # value_source default
6298 # Default value: 0x0000C000
6299 # Legal values: 0x4000 to 0x80000000
6303 # Buffer size in getc when loading images
6304 # When loading images a buffer is used between redboot and the
6305 # underlying storage medium, eg a filesystem, or a socket etc.
6306 # The size of this buffer can have a big impart on load speed.
6308 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6310 # No user value, uncomment the following line to provide one.
6312 # value_source default
6313 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6314 # CYGPKG_REDBOOT_FILEIO == 0
6319 # Redboot for ARM options
6320 # This option lists the target's requirements for a valid Redboot
6323 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6324 # ActiveIf constraint: CYGPKG_REDBOOT
6325 # CYGPKG_REDBOOT == current
6328 # There is no associated value.
6330 # The following properties are affected by this value
6334 # Provide the exec command in RedBoot
6335 # This option contains requirements for booting linux
6336 # from RedBoot. The component is enabled/disabled from
6339 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6340 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6341 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6344 # There is no associated value.
6348 # Enable -x switch for exec command.
6349 # This option allows bi-endian platforms to launch kernels
6350 # built for an endianess different than the RedBoot endianess
6352 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6354 # No user value, uncomment the following line to provide one.
6356 # value_source default
6360 # Physical base address of linux kernel
6361 # This is the physical address of the base of the
6362 # Linux kernel image.
6364 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6366 # No user value, uncomment the following line to provide one.
6367 # user_value 0x80108000
6368 # value_source default
6369 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6370 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x80108000
6374 # Default physical base address of linux kernel
6375 # This is the physical address of the base of the
6376 # Linux kernel image. This option gets set by the
6379 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6381 # No user value, uncomment the following line to provide one.
6382 # user_value 0x00008000
6383 # The inferred value should not be edited directly.
6384 inferred_value 0x80108000
6385 # value_source inferred
6386 # Default value: 0x00008000
6388 # The following properties are affected by this value
6389 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6390 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6391 # component CYGPKG_REDBOOT_HAL_TX25_OPTIONS
6392 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x80108000
6395 # Base address of linux kernel parameter tags
6396 # This is the base address of the area of memory used to
6397 # pass parameters to the Linux kernel. This should be chosen
6398 # to avoid overlap with the kernel and any ramdisk image.
6400 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6402 # No user value, uncomment the following line to provide one.
6403 # user_value 0x00000100
6404 # value_source default
6405 # Default value: 0x00000100
6410 # Redboot HAL options
6411 # This option lists the target's requirements for a valid Redboot
6414 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6415 # ActiveIf constraint: CYGPKG_REDBOOT
6416 # CYGPKG_REDBOOT == current
6419 # There is no associated value.
6423 # Build Redboot ROM binary image
6424 # This option enables the conversion of the Redboot ELF
6425 # image to a binary image suitable for ROM programming.
6427 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6428 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6429 # CYGBLD_BUILD_REDBOOT == 1
6433 # No user value, uncomment the following line to provide one.
6435 # value_source default
6440 # Redboot HAL variant options
6442 cdl_component CYGPKG_REDBOOT_HAL_TX25_OPTIONS {
6443 # ActiveIf constraint: CYGPKG_REDBOOT
6444 # CYGPKG_REDBOOT == current
6447 # There is no associated value.
6448 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x80108000
6449 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x80108000
6454 # ISO C and POSIX infrastructure
6455 # eCos supports implementations of ISO C libraries and POSIX
6456 # implementations. This package provides infrastructure used by
6457 # all such implementations.
6459 cdl_package CYGPKG_ISOINFRA {
6460 # Packages cannot be added or removed, nor can their version be changed,
6461 # simply by editing their value. Instead the appropriate configuration
6462 # should be used to perform these actions.
6464 # This value cannot be modified here.
6466 # Current value: 1 current
6468 # The following properties are affected by this value
6469 # component CYGBLD_BUILD_REDBOOT
6470 # Requires: CYGPKG_ISOINFRA
6471 # package CYGPKG_LIBC_STRING
6472 # Requires: CYGPKG_ISOINFRA
6473 # package CYGPKG_COMPRESS_ZLIB
6474 # Requires: CYGPKG_ISOINFRA
6475 # package CYGPKG_IO_FLASH
6476 # Requires: CYGPKG_ISOINFRA
6477 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6478 # Requires: CYGPKG_ISOINFRA
6479 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6480 # DefaultValue: 0 != CYGPKG_ISOINFRA
6481 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6482 # ActiveIf: CYGPKG_ISOINFRA
6483 # package CYGPKG_LIBC_I18N
6484 # Requires: CYGPKG_ISOINFRA
6485 # package CYGPKG_LIBC_STDLIB
6486 # Requires: CYGPKG_ISOINFRA
6490 # Startup and termination
6492 cdl_component CYGPKG_ISO_STARTUP {
6493 # There is no associated value.
6497 # main() startup implementations
6498 # Implementations of this interface arrange for a user-supplied
6499 # main() to be called in an ISO compatible environment.
6501 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6502 # No options implement this inferface
6503 # This value cannot be modified here.
6506 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6507 # CYGINT_ISO_MAIN_STARTUP == 0
6510 # The following properties are affected by this value
6511 # interface CYGINT_ISO_MAIN_STARTUP
6512 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6515 # environ implementations
6516 # Implementations of this interface provide the environ
6517 # variable required by POSIX.
6519 cdl_interface CYGINT_ISO_ENVIRON {
6520 # No options implement this inferface
6521 # This value cannot be modified here.
6524 # Requires: 1 >= CYGINT_ISO_ENVIRON
6525 # CYGINT_ISO_ENVIRON == 0
6528 # The following properties are affected by this value
6529 # interface CYGINT_ISO_ENVIRON
6530 # Requires: 1 >= CYGINT_ISO_ENVIRON
6536 cdl_component CYGPKG_ISO_CTYPE_H {
6537 # There is no associated value.
6541 # Number of implementations of ctype functions
6543 cdl_interface CYGINT_ISO_CTYPE {
6544 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6545 # This value cannot be modified here.
6548 # Requires: 1 >= CYGINT_ISO_CTYPE
6549 # CYGINT_ISO_CTYPE == 1
6552 # The following properties are affected by this value
6553 # interface CYGINT_ISO_CTYPE
6554 # Requires: 1 >= CYGINT_ISO_CTYPE
6555 # package CYGPKG_HAL_ARM_TX25KARO
6556 # Requires: CYGINT_ISO_CTYPE
6557 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6558 # Requires: CYGINT_ISO_CTYPE
6559 # package CYGPKG_LIBC_STDLIB
6560 # Requires: CYGINT_ISO_CTYPE
6563 # Ctype implementation header
6565 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6567 # No user value, uncomment the following line to provide one.
6569 # The inferred value should not be edited directly.
6570 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6571 # value_source inferred
6572 # Default value: 0 0
6574 # The following properties are affected by this value
6575 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6576 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6577 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6578 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6584 cdl_component CYGPKG_ISO_ERRNO {
6585 # There is no associated value.
6589 # Number of implementations of error codes
6591 cdl_interface CYGINT_ISO_ERRNO_CODES {
6592 # Implemented by CYGPKG_ERROR, active, enabled
6593 # This value cannot be modified here.
6596 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6597 # CYGINT_ISO_ERRNO_CODES == 1
6600 # The following properties are affected by this value
6601 # interface CYGINT_ISO_ERRNO_CODES
6602 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6605 # Error codes implementation header
6607 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6609 # No user value, uncomment the following line to provide one.
6611 # The inferred value should not be edited directly.
6612 inferred_value 1 <cyg/error/codes.h>
6613 # value_source inferred
6614 # Default value: 0 0
6616 # The following properties are affected by this value
6617 # package CYGPKG_ERROR
6618 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6621 # Number of implementations of errno variable
6623 cdl_interface CYGINT_ISO_ERRNO {
6624 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6625 # This value cannot be modified here.
6628 # Requires: 1 >= CYGINT_ISO_ERRNO
6629 # CYGINT_ISO_ERRNO == 1
6632 # The following properties are affected by this value
6633 # interface CYGINT_ISO_ERRNO
6634 # Requires: 1 >= CYGINT_ISO_ERRNO
6637 # errno variable implementation header
6639 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6641 # No user value, uncomment the following line to provide one.
6643 # The inferred value should not be edited directly.
6644 inferred_value 1 <cyg/error/errno.h>
6645 # value_source inferred
6646 # Default value: 0 0
6648 # The following properties are affected by this value
6649 # component CYGPKG_ERROR_ERRNO
6650 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6654 # Locale-related functions
6656 cdl_component CYGPKG_ISO_LOCALE {
6657 # There is no associated value.
6661 # Number of implementations of locale functions
6663 cdl_interface CYGINT_ISO_LOCALE {
6664 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6665 # This value cannot be modified here.
6668 # Requires: 1 >= CYGINT_ISO_LOCALE
6669 # CYGINT_ISO_LOCALE == 1
6672 # The following properties are affected by this value
6673 # interface CYGINT_ISO_LOCALE
6674 # Requires: 1 >= CYGINT_ISO_LOCALE
6677 # Locale implementation header
6679 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6681 # No user value, uncomment the following line to provide one.
6683 # value_source default
6684 # Default value: 0 0
6688 # Standard I/O-related functionality
6690 cdl_component CYGPKG_ISO_STDIO {
6691 # There is no associated value.
6695 # Number of implementations of stdio file types
6697 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6698 # No options implement this inferface
6699 # This value cannot be modified here.
6701 # Current value: 0 0
6702 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6703 # CYGINT_ISO_STDIO_FILETYPES == 0
6706 # The following properties are affected by this value
6707 # interface CYGINT_ISO_STDIO_FILETYPES
6708 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6711 # Stdio file types implementation header
6713 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6715 # No user value, uncomment the following line to provide one.
6717 # value_source default
6718 # Default value: 0 0
6721 # Stdio standard streams implementations
6723 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6724 # No options implement this inferface
6725 # This value cannot be modified here.
6727 # Current value: 0 0
6728 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6729 # CYGINT_ISO_STDIO_STREAMS == 0
6732 # The following properties are affected by this value
6733 # interface CYGINT_ISO_STDIO_STREAMS
6734 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6737 # Stdio standard streams implementation header
6738 # This header file must define stdin, stdout
6741 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6743 # No user value, uncomment the following line to provide one.
6745 # value_source default
6746 # Default value: 0 0
6749 # Number of implementations of stdio file operations
6751 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6752 # No options implement this inferface
6753 # This value cannot be modified here.
6755 # Current value: 0 0
6756 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6757 # CYGINT_ISO_STDIO_FILEOPS == 0
6760 # The following properties are affected by this value
6761 # interface CYGINT_ISO_STDIO_FILEOPS
6762 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6765 # Stdio file operations implementation header
6766 # This header controls the file system operations on a file
6767 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6770 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6772 # No user value, uncomment the following line to provide one.
6774 # value_source default
6775 # Default value: 0 0
6778 # Number of implementations of stdio file access functionals
6780 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6781 # No options implement this inferface
6782 # This value cannot be modified here.
6784 # Current value: 0 0
6785 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6786 # CYGINT_ISO_STDIO_FILEACCESS == 0
6789 # The following properties are affected by this value
6790 # interface CYGINT_ISO_STDIO_FILEACCESS
6791 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6792 # option CYGFUN_COMPRESS_ZLIB_GZIO
6793 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6796 # Stdio file access implementation header
6797 # This header controls the file access operations
6798 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6799 # setvbuf(), and associated constants.
6801 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6803 # No user value, uncomment the following line to provide one.
6805 # value_source default
6806 # Default value: 0 0
6809 # Number of implementations of stdio formatted I/O
6811 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6812 # No options implement this inferface
6813 # This value cannot be modified here.
6815 # Current value: 0 0
6816 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6817 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6820 # The following properties are affected by this value
6821 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6822 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6823 # option CYGFUN_COMPRESS_ZLIB_GZIO
6824 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6827 # Stdio formatted I/O implementation header
6829 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6831 # No user value, uncomment the following line to provide one.
6833 # value_source default
6834 # Default value: 0 0
6837 # Number of implementations of stdio character I/O
6839 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6840 # No options implement this inferface
6841 # This value cannot be modified here.
6843 # Current value: 0 0
6844 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6845 # CYGINT_ISO_STDIO_CHAR_IO == 0
6848 # The following properties are affected by this value
6849 # interface CYGINT_ISO_STDIO_CHAR_IO
6850 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6853 # Stdio character I/O implementation header
6855 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6857 # No user value, uncomment the following line to provide one.
6859 # value_source default
6860 # Default value: 0 0
6863 # Number of implementations of stdio direct I/O
6865 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6866 # No options implement this inferface
6867 # This value cannot be modified here.
6869 # Current value: 0 0
6870 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6871 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6874 # The following properties are affected by this value
6875 # interface CYGINT_ISO_STDIO_DIRECT_IO
6876 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6879 # Stdio direct I/O implementation header
6881 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6883 # No user value, uncomment the following line to provide one.
6885 # value_source default
6886 # Default value: 0 0
6889 # Number of implementations of stdio file positioning
6891 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6892 # No options implement this inferface
6893 # This value cannot be modified here.
6895 # Current value: 0 0
6896 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6897 # CYGINT_ISO_STDIO_FILEPOS == 0
6900 # The following properties are affected by this value
6901 # interface CYGINT_ISO_STDIO_FILEPOS
6902 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6903 # option CYGFUN_COMPRESS_ZLIB_GZIO
6904 # Requires: CYGINT_ISO_STDIO_FILEPOS
6907 # Stdio file positioning implementation header
6909 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6911 # No user value, uncomment the following line to provide one.
6913 # value_source default
6914 # Default value: 0 0
6917 # Number of implementations of stdio error handling
6919 cdl_interface CYGINT_ISO_STDIO_ERROR {
6920 # No options implement this inferface
6921 # This value cannot be modified here.
6923 # Current value: 0 0
6924 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6925 # CYGINT_ISO_STDIO_ERROR == 0
6928 # The following properties are affected by this value
6929 # interface CYGINT_ISO_STDIO_ERROR
6930 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6933 # Stdio error handling implementation header
6935 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6937 # No user value, uncomment the following line to provide one.
6939 # value_source default
6940 # Default value: 0 0
6943 # POSIX fd-related function implementations
6945 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
6946 # No options implement this inferface
6947 # This value cannot be modified here.
6949 # Current value: 0 0
6950 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6951 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
6954 # The following properties are affected by this value
6955 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
6956 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
6959 # POSIX fd-related function implementation header
6961 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
6963 # No user value, uncomment the following line to provide one.
6965 # value_source default
6966 # Default value: 0 0
6970 # Standard general utility functions
6972 cdl_component CYGPKG_ISO_STDLIB {
6973 # There is no associated value.
6977 # String conversion function implementations
6979 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
6980 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
6981 # This value cannot be modified here.
6984 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6985 # CYGINT_ISO_STDLIB_STRCONV == 1
6988 # The following properties are affected by this value
6989 # interface CYGINT_ISO_STDLIB_STRCONV
6990 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
6993 # String conversion function implementation header
6995 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
6997 # No user value, uncomment the following line to provide one.
6999 # The inferred value should not be edited directly.
7000 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7001 # value_source inferred
7002 # Default value: 0 0
7004 # The following properties are affected by this value
7005 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7006 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7009 # String to FP conversion function implementations
7011 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7012 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7013 # This value cannot be modified here.
7016 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7017 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7020 # The following properties are affected by this value
7021 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7022 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7025 # String to FP conversion function implementation header
7027 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7029 # No user value, uncomment the following line to provide one.
7031 # value_source default
7032 # Default value: 0 0
7035 # Random number generator implementations
7037 cdl_interface CYGINT_ISO_RAND {
7038 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7039 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7040 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7041 # This value cannot be modified here.
7044 # Requires: 1 >= CYGINT_ISO_RAND
7045 # CYGINT_ISO_RAND == 1
7048 # The following properties are affected by this value
7049 # interface CYGINT_ISO_RAND
7050 # Requires: 1 >= CYGINT_ISO_RAND
7053 # Random number generator implementation header
7055 cdl_option CYGBLD_ISO_RAND_HEADER {
7057 # No user value, uncomment the following line to provide one.
7059 # value_source default
7060 # Default value: 0 0
7063 # Malloc implementations
7065 cdl_interface CYGINT_ISO_MALLOC {
7066 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7067 # This value cannot be modified here.
7070 # Requires: 1 >= CYGINT_ISO_MALLOC
7071 # CYGINT_ISO_MALLOC == 1
7074 # The following properties are affected by this value
7075 # interface CYGINT_ISO_MALLOC
7076 # Requires: 1 >= CYGINT_ISO_MALLOC
7077 # option CYGFUN_LIBC_STRING_STRDUP
7078 # ActiveIf: CYGINT_ISO_MALLOC
7081 # Malloc implementation header
7083 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7085 # No user value, uncomment the following line to provide one.
7087 # value_source default
7088 # Default value: 0 0
7091 # Mallinfo() implementations
7093 cdl_interface CYGINT_ISO_MALLINFO {
7094 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7095 # This value cannot be modified here.
7098 # Requires: 1 >= CYGINT_ISO_MALLINFO
7099 # CYGINT_ISO_MALLINFO == 1
7102 # The following properties are affected by this value
7103 # interface CYGINT_ISO_MALLINFO
7104 # Requires: 1 >= CYGINT_ISO_MALLINFO
7107 # Mallinfo() implementation header
7109 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7111 # No user value, uncomment the following line to provide one.
7113 # value_source default
7114 # Default value: 0 0
7117 # Program exit functionality implementations
7119 cdl_interface CYGINT_ISO_EXIT {
7120 # No options implement this inferface
7121 # This value cannot be modified here.
7124 # Requires: 1 >= CYGINT_ISO_EXIT
7125 # CYGINT_ISO_EXIT == 0
7128 # The following properties are affected by this value
7129 # interface CYGINT_ISO_EXIT
7130 # Requires: 1 >= CYGINT_ISO_EXIT
7131 # option CYGFUN_INFRA_DUMMY_ABORT
7132 # Requires: !CYGINT_ISO_EXIT
7133 # option CYGFUN_INFRA_DUMMY_ABORT
7134 # DefaultValue: CYGINT_ISO_EXIT == 0
7137 # Program exit functionality implementation header
7139 cdl_option CYGBLD_ISO_EXIT_HEADER {
7141 # No user value, uncomment the following line to provide one.
7143 # value_source default
7144 # Default value: 0 0
7147 # Program environment implementations
7149 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7150 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7151 # This value cannot be modified here.
7154 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7155 # CYGINT_ISO_STDLIB_ENVIRON == 1
7158 # The following properties are affected by this value
7159 # interface CYGINT_ISO_STDLIB_ENVIRON
7160 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7163 # Program environment implementation header
7165 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7167 # No user value, uncomment the following line to provide one.
7169 # value_source default
7170 # Default value: 0 0
7173 # system() implementations
7175 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7176 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7177 # This value cannot be modified here.
7180 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7181 # CYGINT_ISO_STDLIB_SYSTEM == 1
7184 # The following properties are affected by this value
7185 # interface CYGINT_ISO_STDLIB_SYSTEM
7186 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7189 # system() implementation header
7191 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7193 # No user value, uncomment the following line to provide one.
7195 # value_source default
7196 # Default value: 0 0
7199 # bsearch() implementations
7201 cdl_interface CYGINT_ISO_BSEARCH {
7202 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7203 # This value cannot be modified here.
7206 # Requires: 1 >= CYGINT_ISO_BSEARCH
7207 # CYGINT_ISO_BSEARCH == 1
7210 # The following properties are affected by this value
7211 # interface CYGINT_ISO_BSEARCH
7212 # Requires: 1 >= CYGINT_ISO_BSEARCH
7215 # bsearch() implementation header
7217 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7219 # No user value, uncomment the following line to provide one.
7221 # value_source default
7222 # Default value: 0 0
7225 # qsort() implementations
7227 cdl_interface CYGINT_ISO_QSORT {
7228 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7229 # This value cannot be modified here.
7232 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7233 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7236 # The following properties are affected by this value
7239 # qsort() implementation header
7241 cdl_option CYGBLD_ISO_QSORT_HEADER {
7243 # No user value, uncomment the following line to provide one.
7245 # value_source default
7246 # Default value: 0 0
7249 # abs()/labs() implementations
7251 cdl_interface CYGINT_ISO_ABS {
7252 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7253 # This value cannot be modified here.
7256 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7257 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7260 # The following properties are affected by this value
7263 # abs()/labs() implementation header
7265 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7267 # No user value, uncomment the following line to provide one.
7269 # The inferred value should not be edited directly.
7270 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7271 # value_source inferred
7272 # Default value: 0 0
7274 # The following properties are affected by this value
7275 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7276 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7279 # div()/ldiv() implementations
7281 cdl_interface CYGINT_ISO_DIV {
7282 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7283 # This value cannot be modified here.
7286 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7287 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7290 # The following properties are affected by this value
7293 # div()/ldiv() implementation header
7295 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7297 # No user value, uncomment the following line to provide one.
7299 # The inferred value should not be edited directly.
7300 inferred_value 1 <cyg/libc/stdlib/div.inl>
7301 # value_source inferred
7302 # Default value: 0 0
7304 # The following properties are affected by this value
7305 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7306 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7309 # Header defining the implementation's MB_CUR_MAX
7311 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7313 # No user value, uncomment the following line to provide one.
7315 # value_source default
7316 # Default value: 0 0
7318 # The following properties are affected by this value
7319 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7320 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7323 # Multibyte character implementations
7325 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7326 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7327 # This value cannot be modified here.
7330 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7331 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7334 # The following properties are affected by this value
7335 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7336 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7339 # Multibyte character implementation header
7341 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7343 # No user value, uncomment the following line to provide one.
7345 # value_source default
7346 # Default value: 0 0
7352 cdl_component CYGPKG_ISO_STRING {
7353 # There is no associated value.
7357 # Number of implementations of strerror() function
7359 cdl_interface CYGINT_ISO_STRERROR {
7360 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7361 # This value cannot be modified here.
7363 # Current value: 1 1
7364 # Requires: 1 >= CYGINT_ISO_STRERROR
7365 # CYGINT_ISO_STRERROR == 1
7368 # The following properties are affected by this value
7369 # interface CYGINT_ISO_STRERROR
7370 # Requires: 1 >= CYGINT_ISO_STRERROR
7373 # strerror() implementation header
7375 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7377 # No user value, uncomment the following line to provide one.
7379 # The inferred value should not be edited directly.
7380 inferred_value 1 <cyg/error/strerror.h>
7381 # value_source inferred
7382 # Default value: 0 0
7384 # The following properties are affected by this value
7385 # option CYGPKG_ERROR_STRERROR
7386 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7389 # memcpy() implementation header
7391 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7393 # No user value, uncomment the following line to provide one.
7395 # value_source default
7396 # Default value: 0 0
7399 # memset() implementation header
7401 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7403 # No user value, uncomment the following line to provide one.
7405 # value_source default
7406 # Default value: 0 0
7409 # Number of implementations of strtok_r() function
7411 cdl_interface CYGINT_ISO_STRTOK_R {
7412 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7413 # This value cannot be modified here.
7415 # Current value: 1 1
7416 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7417 # CYGINT_ISO_STRTOK_R == 1
7420 # The following properties are affected by this value
7421 # interface CYGINT_ISO_STRTOK_R
7422 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7425 # strtok_r() implementation header
7427 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7429 # No user value, uncomment the following line to provide one.
7431 # The inferred value should not be edited directly.
7432 inferred_value 1 <cyg/libc/string/string.h>
7433 # value_source inferred
7434 # Default value: 0 0
7436 # The following properties are affected by this value
7437 # package CYGPKG_LIBC_STRING
7438 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7441 # Number of implementations of locale-specific string functions
7442 # This covers locale-dependent string functions such as strcoll()
7445 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7446 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7447 # This value cannot be modified here.
7449 # Current value: 1 1
7450 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7451 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7454 # The following properties are affected by this value
7455 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7456 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7459 # Locale-specific string functions' implementation header
7460 # This covers locale-dependent string functions such as strcoll()
7463 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7465 # No user value, uncomment the following line to provide one.
7467 # The inferred value should not be edited directly.
7468 inferred_value 1 <cyg/libc/string/string.h>
7469 # value_source inferred
7470 # Default value: 0 0
7472 # The following properties are affected by this value
7473 # package CYGPKG_LIBC_STRING
7474 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7477 # Number of implementations of BSD string functions
7479 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7480 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7481 # This value cannot be modified here.
7483 # Current value: 0 0
7484 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7485 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7488 # The following properties are affected by this value
7489 # interface CYGINT_ISO_STRING_BSD_FUNCS
7490 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7493 # BSD string functions' implementation header
7495 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7497 # No user value, uncomment the following line to provide one.
7499 # The inferred value should not be edited directly.
7500 inferred_value 1 <cyg/libc/string/bsdstring.h>
7501 # value_source inferred
7502 # Default value: 0 0
7504 # The following properties are affected by this value
7505 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7506 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7509 # Number of implementations of other mem*() functions
7511 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7512 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7513 # This value cannot be modified here.
7515 # Current value: 1 1
7516 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7517 # CYGINT_ISO_STRING_MEMFUNCS == 1
7520 # The following properties are affected by this value
7521 # interface CYGINT_ISO_STRING_MEMFUNCS
7522 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7523 # component CYGBLD_BUILD_REDBOOT
7524 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7525 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7526 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7529 # Other mem*() functions' implementation header
7531 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7533 # No user value, uncomment the following line to provide one.
7535 # The inferred value should not be edited directly.
7536 inferred_value 1 <cyg/libc/string/string.h>
7537 # value_source inferred
7538 # Default value: 0 0
7540 # The following properties are affected by this value
7541 # package CYGPKG_LIBC_STRING
7542 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7545 # Number of implementations of other ISO C str*() functions
7546 # This covers the other str*() functions defined by ISO C.
7548 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7549 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7550 # This value cannot be modified here.
7552 # Current value: 1 1
7553 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7554 # CYGINT_ISO_STRING_STRFUNCS == 1
7557 # The following properties are affected by this value
7558 # interface CYGINT_ISO_STRING_STRFUNCS
7559 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7560 # option CYGFUN_INFRA_DUMMY_STRLEN
7561 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7562 # option CYGFUN_INFRA_DUMMY_STRLEN
7563 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7564 # component CYGBLD_BUILD_REDBOOT
7565 # Requires: CYGINT_ISO_STRING_STRFUNCS
7566 # component CYGPKG_IO_ETH_DRIVERS_NET
7567 # Requires: CYGINT_ISO_STRING_STRFUNCS
7568 # option CYGFUN_COMPRESS_ZLIB_GZIO
7569 # Requires: CYGINT_ISO_STRING_STRFUNCS
7570 # package CYGPKG_IO_FLASH
7571 # Requires: CYGINT_ISO_STRING_STRFUNCS
7572 # package CYGPKG_LIBC_STDLIB
7573 # Requires: CYGINT_ISO_STRING_STRFUNCS
7576 # Other ISO C str*() functions' implementation header
7577 # This covers the other str*() functions defined by ISO C.
7579 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7581 # No user value, uncomment the following line to provide one.
7583 # The inferred value should not be edited directly.
7584 inferred_value 1 <cyg/libc/string/string.h>
7585 # value_source inferred
7586 # Default value: 0 0
7588 # The following properties are affected by this value
7589 # package CYGPKG_LIBC_STRING
7590 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7594 # Clock and time functionality
7596 cdl_component CYGPKG_ISO_TIME {
7597 # There is no associated value.
7601 # time_t implementation header
7603 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7605 # No user value, uncomment the following line to provide one.
7607 # value_source default
7608 # Default value: 0 0
7611 # clock_t implementation header
7613 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7615 # No user value, uncomment the following line to provide one.
7617 # value_source default
7618 # Default value: 0 0
7621 # struct timeval implementation header
7623 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7625 # No user value, uncomment the following line to provide one.
7627 # value_source default
7628 # Default value: 0 0
7631 # fnmatch implementation header
7633 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7635 # No user value, uncomment the following line to provide one.
7637 # value_source default
7638 # Default value: 0 0
7641 # Number of implementations of POSIX timer types
7643 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7644 # No options implement this inferface
7645 # This value cannot be modified here.
7647 # Current value: 0 0
7648 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7649 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7652 # The following properties are affected by this value
7653 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7654 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7657 # POSIX timer types implementation header
7659 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7661 # No user value, uncomment the following line to provide one.
7663 # value_source default
7664 # Default value: 0 0
7667 # Number of implementations of POSIX clock types
7669 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7670 # No options implement this inferface
7671 # This value cannot be modified here.
7673 # Current value: 0 0
7674 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7675 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7678 # The following properties are affected by this value
7679 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7680 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7683 # POSIX clock types implementation header
7685 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7687 # No user value, uncomment the following line to provide one.
7689 # value_source default
7690 # Default value: 0 0
7693 # Number of implementations of ISO C types
7695 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7696 # No options implement this inferface
7697 # This value cannot be modified here.
7699 # Current value: 0 0
7700 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7701 # CYGINT_ISO_C_TIME_TYPES == 0
7704 # The following properties are affected by this value
7705 # interface CYGINT_ISO_C_TIME_TYPES
7706 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7709 # ISO C time types implementation header
7711 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7713 # No user value, uncomment the following line to provide one.
7715 # value_source default
7716 # Default value: 0 0
7719 # Number of implementations of POSIX timers
7721 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7722 # No options implement this inferface
7723 # This value cannot be modified here.
7725 # Current value: 0 0
7726 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7727 # CYGINT_ISO_POSIX_TIMERS == 0
7730 # The following properties are affected by this value
7731 # interface CYGINT_ISO_POSIX_TIMERS
7732 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7735 # POSIX timer implementation header
7737 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7739 # No user value, uncomment the following line to provide one.
7741 # value_source default
7742 # Default value: 0 0
7745 # Number of implementations of POSIX clocks
7747 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7748 # No options implement this inferface
7749 # This value cannot be modified here.
7751 # Current value: 0 0
7752 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7753 # CYGINT_ISO_POSIX_CLOCKS == 0
7756 # The following properties are affected by this value
7757 # interface CYGINT_ISO_POSIX_CLOCKS
7758 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7761 # POSIX clocks implementation header
7763 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7765 # No user value, uncomment the following line to provide one.
7767 # value_source default
7768 # Default value: 0 0
7771 # Number of implementations of ISO C clock functions
7773 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7774 # No options implement this inferface
7775 # This value cannot be modified here.
7777 # Current value: 0 0
7778 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7779 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7782 # The following properties are affected by this value
7783 # interface CYGINT_ISO_C_CLOCK_FUNCS
7784 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7787 # ISO C clock functions' implementation header
7789 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7791 # No user value, uncomment the following line to provide one.
7793 # value_source default
7794 # Default value: 0 0
7797 # Number of implementations of tzset() function
7799 cdl_interface CYGINT_ISO_TZSET {
7800 # No options implement this inferface
7801 # This value cannot be modified here.
7803 # Current value: 0 0
7804 # Requires: 1 >= CYGINT_ISO_TZSET
7805 # CYGINT_ISO_TZSET == 0
7808 # The following properties are affected by this value
7809 # interface CYGINT_ISO_TZSET
7810 # Requires: 1 >= CYGINT_ISO_TZSET
7813 # tzset() implementation header
7815 cdl_option CYGBLD_ISO_TZSET_HEADER {
7817 # No user value, uncomment the following line to provide one.
7819 # value_source default
7820 # Default value: 0 0
7824 # Signal functionality
7826 cdl_component CYGPKG_ISO_SIGNAL {
7827 # There is no associated value.
7831 # Number of implementations of signal numbers
7833 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7834 # No options implement this inferface
7835 # This value cannot be modified here.
7838 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7839 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7842 # The following properties are affected by this value
7843 # interface CYGINT_ISO_SIGNAL_NUMBERS
7844 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7847 # Signal numbering implementation header
7848 # This header provides the mapping of signal
7849 # names (e.g. SIGBUS) to numbers.
7851 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7853 # No user value, uncomment the following line to provide one.
7855 # value_source default
7856 # Default value: 0 0
7859 # Number of signal implementations
7861 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7862 # No options implement this inferface
7863 # This value cannot be modified here.
7866 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7867 # CYGINT_ISO_SIGNAL_IMPL == 0
7870 # The following properties are affected by this value
7871 # interface CYGINT_ISO_SIGNAL_IMPL
7872 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7875 # Signals implementation header
7877 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7879 # No user value, uncomment the following line to provide one.
7881 # value_source default
7882 # Default value: 0 0
7885 # POSIX real time signals feature test macro
7886 # This defines the POSIX feature test macro
7887 # that indicates that the POSIX real time signals
7890 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7891 # No options implement this inferface
7892 # This value cannot be modified here.
7895 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7896 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7899 # The following properties are affected by this value
7900 # interface CYGINT_POSIX_REALTIME_SIGNALS
7901 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7905 # Non-local jumps functionality
7907 cdl_component CYGPKG_ISO_SETJMP {
7908 # There is no associated value.
7912 # setjmp() / longjmp() implementations
7914 cdl_interface CYGINT_ISO_SETJMP {
7915 # No options implement this inferface
7916 # This value cannot be modified here.
7919 # Requires: 1 >= CYGINT_ISO_SETJMP
7920 # CYGINT_ISO_SETJMP == 0
7923 # The following properties are affected by this value
7924 # interface CYGINT_ISO_SETJMP
7925 # Requires: 1 >= CYGINT_ISO_SETJMP
7928 # setjmp() / longjmp() implementation header
7930 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7932 # No user value, uncomment the following line to provide one.
7934 # value_source default
7935 # Default value: 0 0
7938 # sigsetjmp() / siglongjmp() implementations
7940 cdl_interface CYGINT_ISO_SIGSETJMP {
7941 # No options implement this inferface
7942 # This value cannot be modified here.
7945 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7946 # CYGINT_ISO_SIGSETJMP == 0
7949 # The following properties are affected by this value
7950 # interface CYGINT_ISO_SIGSETJMP
7951 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
7954 # sigsetjmp() / siglongjmp() implementation header
7956 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
7958 # No user value, uncomment the following line to provide one.
7960 # value_source default
7961 # Default value: 0 0
7965 # Assertions implementation header
7967 cdl_option CYGBLD_ISO_ASSERT_HEADER {
7969 # No user value, uncomment the following line to provide one.
7971 # value_source default
7972 # Default value: 0 0
7975 # POSIX file control
7976 # This covers the POSIX file control definitions,
7977 # normally found in <fcntl.h>
7979 cdl_component CYGPKG_ISO_POSIX_FCNTL {
7980 # There is no associated value.
7984 # POSIX open flags implementation header
7986 cdl_option CYGBLD_ISO_OFLAG_HEADER {
7988 # No user value, uncomment the following line to provide one.
7990 # value_source default
7991 # Default value: 0 0
7994 # POSIX fcntl() implementations
7996 cdl_interface CYGINT_ISO_FCNTL {
7997 # No options implement this inferface
7998 # This value cannot be modified here.
8001 # Requires: 1 >= CYGINT_ISO_FCNTL
8002 # CYGINT_ISO_FCNTL == 0
8005 # The following properties are affected by this value
8006 # interface CYGINT_ISO_FCNTL
8007 # Requires: 1 >= CYGINT_ISO_FCNTL
8010 # POSIX fcntl() implementation header
8012 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8014 # No user value, uncomment the following line to provide one.
8016 # value_source default
8017 # Default value: 0 0
8020 # POSIX file open implementations
8022 cdl_interface CYGINT_ISO_OPEN {
8023 # No options implement this inferface
8024 # This value cannot be modified here.
8027 # Requires: 1 >= CYGINT_ISO_OPEN
8028 # CYGINT_ISO_OPEN == 0
8031 # The following properties are affected by this value
8032 # interface CYGINT_ISO_OPEN
8033 # Requires: 1 >= CYGINT_ISO_OPEN
8036 # POSIX file open implementation header
8038 cdl_option CYGBLD_ISO_OPEN_HEADER {
8040 # No user value, uncomment the following line to provide one.
8042 # value_source default
8043 # Default value: 0 0
8047 # <sys/stat.h> definitions implementation header
8049 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8051 # No user value, uncomment the following line to provide one.
8053 # value_source default
8054 # Default value: 0 0
8057 # POSIX directory reading implementation
8059 cdl_interface CYGINT_ISO_DIRENT {
8060 # No options implement this inferface
8061 # This value cannot be modified here.
8064 # Requires: 1 >= CYGINT_ISO_DIRENT
8065 # CYGINT_ISO_DIRENT == 0
8068 # The following properties are affected by this value
8069 # interface CYGINT_ISO_DIRENT
8070 # Requires: 1 >= CYGINT_ISO_DIRENT
8073 # <dirent.h> definitions implementation header
8075 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8077 # No user value, uncomment the following line to provide one.
8079 # value_source default
8080 # Default value: 0 0
8083 # POSIX <sys/types.h> contents
8084 # This covers the types required by POSIX to be in
8087 cdl_component CYGPKG_ISO_POSIX_TYPES {
8088 # There is no associated value.
8092 # POSIX thread types implementations
8094 cdl_interface CYGINT_ISO_PTHREADTYPES {
8095 # No options implement this inferface
8096 # This value cannot be modified here.
8099 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8100 # CYGINT_ISO_PTHREADTYPES == 0
8103 # The following properties are affected by this value
8104 # interface CYGINT_ISO_PTHREADTYPES
8105 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8106 # interface CYGINT_ISO_PMUTEXTYPES
8107 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8110 # POSIX thread types implementation header
8112 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8114 # No user value, uncomment the following line to provide one.
8116 # value_source default
8117 # Default value: 0 0
8120 # POSIX mutex types implementations
8122 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8123 # No options implement this inferface
8124 # This value cannot be modified here.
8127 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8128 # CYGINT_ISO_PTHREADTYPES == 0
8132 # POSIX mutex types implementation header
8134 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8136 # No user value, uncomment the following line to provide one.
8138 # value_source default
8139 # Default value: 0 0
8142 # ssize_t implementation header
8144 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8146 # No user value, uncomment the following line to provide one.
8148 # value_source default
8149 # Default value: 0 0
8152 # Filesystem types implementation header
8154 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8156 # No user value, uncomment the following line to provide one.
8158 # value_source default
8159 # Default value: 0 0
8162 # gid_t, pid_t, uid_t implementation header
8164 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8166 # No user value, uncomment the following line to provide one.
8168 # value_source default
8169 # Default value: 0 0
8173 # Non-POSIX <sys/types.h> contents
8174 # This covers the extra types required by non-POSIX
8175 # packages to be in <sys/types.h>. These would normally
8176 # only be visible if _POSIX_SOURCE is not defined.
8178 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8179 # There is no associated value.
8183 # BSD compatible types
8185 cdl_interface CYGINT_ISO_BSDTYPES {
8186 # No options implement this inferface
8187 # This value cannot be modified here.
8190 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8191 # CYGINT_ISO_BSDTYPES == 0
8194 # The following properties are affected by this value
8195 # interface CYGINT_ISO_BSDTYPES
8196 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8201 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8203 # No user value, uncomment the following line to provide one.
8205 # value_source default
8206 # Default value: 0 0
8212 cdl_component CYGPKG_ISO_UTSNAME {
8213 # There is no associated value.
8219 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8221 # No user value, uncomment the following line to provide one.
8223 # value_source default
8224 # Default value: 0 0
8230 cdl_component CYGPKG_ISO_SCHED {
8231 # There is no associated value.
8235 # POSIX scheduler implementations
8237 cdl_interface CYGINT_ISO_SCHED_IMPL {
8238 # No options implement this inferface
8239 # This value cannot be modified here.
8242 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8243 # CYGINT_ISO_SCHED_IMPL == 0
8246 # The following properties are affected by this value
8247 # interface CYGINT_ISO_SCHED_IMPL
8248 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8251 # POSIX scheduler implementation header
8253 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8255 # No user value, uncomment the following line to provide one.
8257 # value_source default
8258 # Default value: 0 0
8264 cdl_component CYGPKG_ISO_SEMAPHORES {
8265 # There is no associated value.
8269 # POSIX semaphore implementations
8271 cdl_interface CYGINT_ISO_SEMAPHORES {
8272 # No options implement this inferface
8273 # This value cannot be modified here.
8276 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8277 # CYGINT_ISO_SEMAPHORES == 0
8280 # The following properties are affected by this value
8281 # interface CYGINT_ISO_SEMAPHORES
8282 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8285 # POSIX semaphore implementation header
8287 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8289 # No user value, uncomment the following line to provide one.
8291 # value_source default
8292 # Default value: 0 0
8296 # POSIX message queues
8298 cdl_component CYGPKG_ISO_MQUEUE {
8299 # There is no associated value.
8305 cdl_interface CYGINT_ISO_MQUEUE {
8306 # No options implement this inferface
8307 # This value cannot be modified here.
8310 # Requires: 1 >= CYGINT_ISO_MQUEUE
8311 # CYGINT_ISO_MQUEUE == 0
8314 # The following properties are affected by this value
8315 # interface CYGINT_ISO_MQUEUE
8316 # Requires: 1 >= CYGINT_ISO_MQUEUE
8317 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8318 # ActiveIf: CYGINT_ISO_MQUEUE
8319 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8320 # ActiveIf: CYGINT_ISO_MQUEUE
8323 # Implementation header
8325 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8327 # No user value, uncomment the following line to provide one.
8329 # value_source default
8330 # Default value: 0 0
8333 # Maximum number of open message queues
8335 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8336 # This option is not active
8337 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8338 # CYGINT_ISO_MQUEUE == 0
8342 # No user value, uncomment the following line to provide one.
8344 # value_source default
8345 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8346 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8347 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8351 # Maximum number of message priorities
8353 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8354 # This option is not active
8355 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8356 # CYGINT_ISO_MQUEUE == 0
8360 # No user value, uncomment the following line to provide one.
8361 # user_value 1 65535
8362 # value_source default
8363 # Default value: 1 65535
8369 cdl_component CYGPKG_ISO_PTHREAD {
8370 # There is no associated value.
8374 # POSIX pthread implementations
8376 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8377 # No options implement this inferface
8378 # This value cannot be modified here.
8380 # Current value: 0 0
8381 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8382 # CYGINT_ISO_PTHREAD_IMPL == 0
8385 # The following properties are affected by this value
8386 # interface CYGINT_ISO_PTHREAD_IMPL
8387 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8390 # POSIX pthread implementation header
8392 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8394 # No user value, uncomment the following line to provide one.
8396 # value_source default
8397 # Default value: 0 0
8400 # POSIX mutex/cond var implementations
8402 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8403 # No options implement this inferface
8404 # This value cannot be modified here.
8406 # Current value: 0 0
8407 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8408 # CYGINT_ISO_PTHREAD_MUTEX == 0
8411 # The following properties are affected by this value
8412 # interface CYGINT_ISO_PTHREAD_MUTEX
8413 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8416 # POSIX mutex/cond var implementation header
8418 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8420 # No user value, uncomment the following line to provide one.
8422 # value_source default
8423 # Default value: 0 0
8429 cdl_component CYGPKG_ISO_LIMITS {
8430 # There is no associated value.
8434 # POSIX pthread limits implementations
8436 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8437 # No options implement this inferface
8438 # This value cannot be modified here.
8441 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8442 # CYGINT_ISO_POSIX_LIMITS == 0
8445 # The following properties are affected by this value
8446 # interface CYGINT_ISO_POSIX_LIMITS
8447 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8450 # POSIX pthread limits implementation header
8452 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8454 # No user value, uncomment the following line to provide one.
8456 # value_source default
8457 # Default value: 0 0
8460 # OPEN_MAX implementation header
8462 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8464 # No user value, uncomment the following line to provide one.
8466 # value_source default
8467 # Default value: 0 0
8470 # LINK_MAX implementation header
8472 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8474 # No user value, uncomment the following line to provide one.
8476 # value_source default
8477 # Default value: 0 0
8480 # NAME_MAX implementation header
8482 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8484 # No user value, uncomment the following line to provide one.
8486 # value_source default
8487 # Default value: 0 0
8490 # PATH_MAX implementation header
8492 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8494 # No user value, uncomment the following line to provide one.
8496 # value_source default
8497 # Default value: 0 0
8503 cdl_component CYGPKG_ISO_TERMIOS {
8504 # There is no associated value.
8508 # POSIX termios implementations
8510 cdl_interface CYGINT_ISO_TERMIOS {
8511 # No options implement this inferface
8512 # This value cannot be modified here.
8515 # Requires: 1 >= CYGINT_ISO_TERMIOS
8516 # CYGINT_ISO_TERMIOS == 0
8519 # The following properties are affected by this value
8520 # interface CYGINT_ISO_TERMIOS
8521 # Requires: 1 >= CYGINT_ISO_TERMIOS
8524 # POSIX termios implementation header
8526 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8528 # No user value, uncomment the following line to provide one.
8530 # value_source default
8531 # Default value: 0 0
8537 cdl_component CYGPKG_ISO_DLFCN {
8538 # There is no associated value.
8542 # Dynamic load implementations
8544 cdl_interface CYGINT_ISO_DLFCN {
8545 # No options implement this inferface
8546 # This value cannot be modified here.
8549 # Requires: 1 >= CYGINT_ISO_DLFCN
8550 # CYGINT_ISO_DLFCN == 0
8553 # The following properties are affected by this value
8554 # interface CYGINT_ISO_DLFCN
8555 # Requires: 1 >= CYGINT_ISO_DLFCN
8558 # Dynamic load implementation header
8560 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8562 # No user value, uncomment the following line to provide one.
8564 # value_source default
8565 # Default value: 0 0
8569 # UNIX standard functions
8571 cdl_component CYGPKG_ISO_UNISTD {
8572 # There is no associated value.
8576 # POSIX timer operations implementations
8578 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8579 # No options implement this inferface
8580 # This value cannot be modified here.
8582 # Current value: 0 0
8583 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8584 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8587 # The following properties are affected by this value
8588 # interface CYGINT_ISO_POSIX_TIMER_OPS
8589 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8592 # POSIX timer operations implementation header
8594 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8596 # No user value, uncomment the following line to provide one.
8598 # value_source default
8599 # Default value: 0 0
8602 # POSIX sleep() implementations
8604 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8605 # No options implement this inferface
8606 # This value cannot be modified here.
8608 # Current value: 0 0
8609 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8610 # CYGINT_ISO_POSIX_SLEEP == 0
8613 # The following properties are affected by this value
8614 # interface CYGINT_ISO_POSIX_SLEEP
8615 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8618 # POSIX sleep() implementation header
8620 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8622 # No user value, uncomment the following line to provide one.
8624 # value_source default
8625 # Default value: 0 0
8629 # select()/poll() functions
8631 cdl_component CYGPKG_ISO_SELECT {
8632 # There is no associated value.
8636 # select() implementations
8638 cdl_interface CYGINT_ISO_SELECT {
8639 # No options implement this inferface
8640 # This value cannot be modified here.
8642 # Current value: 0 0
8643 # Requires: 1 >= CYGINT_ISO_SELECT
8644 # CYGINT_ISO_SELECT == 0
8647 # The following properties are affected by this value
8648 # interface CYGINT_ISO_SELECT
8649 # Requires: 1 >= CYGINT_ISO_SELECT
8652 # select() implementation header
8654 cdl_option CYGBLD_ISO_SELECT_HEADER {
8656 # No user value, uncomment the following line to provide one.
8658 # value_source default
8659 # Default value: 0 0
8662 # poll() implementations
8664 cdl_interface CYGINT_ISO_POLL {
8665 # No options implement this inferface
8666 # This value cannot be modified here.
8668 # Current value: 0 0
8669 # Requires: 1 >= CYGINT_ISO_POLL
8670 # CYGINT_ISO_POLL == 0
8673 # The following properties are affected by this value
8674 # interface CYGINT_ISO_POLL
8675 # Requires: 1 >= CYGINT_ISO_POLL
8678 # poll() implementation header
8680 cdl_option CYGBLD_ISO_POLL_HEADER {
8682 # No user value, uncomment the following line to provide one.
8684 # value_source default
8685 # Default value: 0 0
8689 # NetDB utility functions
8691 cdl_component CYGPKG_ISO_NETDB {
8692 # There is no associated value.
8696 # DNS implementations
8698 cdl_interface CYGINT_ISO_DNS {
8699 # No options implement this inferface
8700 # This value cannot be modified here.
8703 # Requires: 1 >= CYGINT_ISO_DNS
8704 # CYGINT_ISO_DNS == 0
8707 # The following properties are affected by this value
8708 # interface CYGINT_ISO_DNS
8709 # Requires: 1 >= CYGINT_ISO_DNS
8712 # DNS implementation header
8714 cdl_option CYGBLD_ISO_DNS_HEADER {
8716 # No user value, uncomment the following line to provide one.
8718 # value_source default
8719 # Default value: 0 0
8722 # Protocol network database implementations
8724 cdl_interface CYGINT_ISO_NETDB_PROTO {
8725 # No options implement this inferface
8726 # This value cannot be modified here.
8729 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8730 # CYGINT_ISO_NETDB_PROTO == 0
8733 # The following properties are affected by this value
8734 # interface CYGINT_ISO_NETDB_PROTO
8735 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8738 # Protocol network database implementation header
8740 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8742 # No user value, uncomment the following line to provide one.
8744 # value_source default
8745 # Default value: 0 0
8748 # Services network database implementations
8750 cdl_interface CYGINT_ISO_NETDB_SERV {
8751 # No options implement this inferface
8752 # This value cannot be modified here.
8755 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8756 # CYGINT_ISO_NETDB_SERV == 0
8759 # The following properties are affected by this value
8760 # interface CYGINT_ISO_NETDB_SERV
8761 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8764 # Services network database implementation header
8766 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8768 # No user value, uncomment the following line to provide one.
8770 # value_source default
8771 # Default value: 0 0
8776 # Package specific build options including control over
8777 # compiler flags used only in building this package,
8778 # and details of which tests are built.
8780 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8781 # There is no associated value.
8785 # Additional compiler flags
8786 # This option modifies the set of compiler flags for
8787 # building the ISO C and POSIX infrastructure package.
8788 # These flags are used in addition to the set of global flags.
8790 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8792 # No user value, uncomment the following line to provide one.
8794 # value_source default
8798 # Suppressed compiler flags
8799 # This option modifies the set of compiler flags for
8800 # building the ISO C and POSIX infrastructure package.
8801 # These flags are removed from the set of global flags
8804 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8806 # No user value, uncomment the following line to provide one.
8808 # value_source default
8815 # doc: ref/services-crc.html
8816 # This package provides support for CRC calculation. Currently
8817 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8818 # Gary S. Brown, and a 16 bit CRC.
8820 cdl_package CYGPKG_CRC {
8821 # Packages cannot be added or removed, nor can their version be changed,
8822 # simply by editing their value. Instead the appropriate configuration
8823 # should be used to perform these actions.
8825 # This value cannot be modified here.
8827 # Current value: 1 current
8829 # The following properties are affected by this value
8830 # package CYGPKG_COMPRESS_ZLIB
8831 # Requires: CYGPKG_CRC
8837 cdl_option CYGPKG_CRC_TESTS {
8838 # Calculated value: "tests/crc_test"
8840 # Current_value: tests/crc_test
8844 # Zlib compress and decompress package
8845 # This package provides support for compression and
8848 cdl_package CYGPKG_COMPRESS_ZLIB {
8849 # Packages cannot be added or removed, nor can their version be changed,
8850 # simply by editing their value. Instead the appropriate configuration
8851 # should be used to perform these actions.
8853 # This value cannot be modified here.
8855 # Current value: 1 current
8856 # Requires: CYGPKG_ISOINFRA
8857 # CYGPKG_ISOINFRA == current
8859 # Requires: CYGPKG_CRC
8860 # CYGPKG_CRC == current
8863 # The following properties are affected by this value
8864 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8865 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8869 # Override memory allocation routines.
8871 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8872 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8873 # This value cannot be modified here.
8877 # The following properties are affected by this value
8878 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8879 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8882 # Should deflate() produce 'gzip' compatible output?
8883 # If this option is set then the output of calling deflate()
8884 # will be wrapped up as a 'gzip' compatible file.
8886 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8888 # No user value, uncomment the following line to provide one.
8890 # value_source default
8894 # Does this library need malloc?
8895 # This pseudo-option will force the memalloc library to be
8896 # required iff the application does not provide it's own
8899 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8900 # This option is not active
8901 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8902 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8906 # No user value, uncomment the following line to provide one.
8908 # value_source default
8910 # Requires: CYGPKG_MEMALLOC
8911 # CYGPKG_MEMALLOC == current
8915 # Include stdio-like utility functions
8916 # This option enables the stdio-like zlib utility functions
8917 # (gzread/gzwrite and friends) provided in gzio.c.
8919 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8921 # No user value, uncomment the following line to provide one.
8923 # value_source default
8924 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8925 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8927 # Requires: CYGINT_ISO_STDIO_FILEPOS
8928 # CYGINT_ISO_STDIO_FILEPOS == 0
8930 # Requires: CYGINT_ISO_STRING_STRFUNCS
8931 # CYGINT_ISO_STRING_STRFUNCS == 1
8933 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8934 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8936 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8937 # CYGINT_ISO_STDIO_FILEACCESS == 0
8941 # Zlib compress and decompress package build options
8942 # Package specific build options including control over
8943 # compiler flags used only in building this package,
8944 # and details of which tests are built.
8946 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
8947 # There is no associated value.
8951 # Additional compiler flags
8952 # This option modifies the set of compiler flags for
8953 # building this package. These flags are used in addition
8954 # to the set of global flags.
8956 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
8958 # No user value, uncomment the following line to provide one.
8959 # user_value "-D__ECOS__ -DNO_ERRNO_H"
8960 # value_source default
8961 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
8964 # Suppressed compiler flags
8965 # This option modifies the set of compiler flags for
8966 # building this package. These flags are removed from
8967 # the set of global flags if present.
8969 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
8971 # No user value, uncomment the following line to provide one.
8972 # user_value -Wstrict-prototypes
8973 # value_source default
8974 # Default value: -Wstrict-prototypes
8977 # Additional compiler flags
8978 # This option modifies the set of compiler flags for
8979 # building this package. These flags are used in addition
8980 # to the set of global flags.
8982 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
8984 # No user value, uncomment the following line to provide one.
8986 # value_source default
8990 # Suppressed compiler flags
8991 # This option modifies the set of compiler flags for
8992 # building this package. These flags are removed from
8993 # the set of global flags if present.
8995 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
8997 # No user value, uncomment the following line to provide one.
8999 # value_source default
9006 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9007 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9009 # Current_value: tests/zlib1.c tests/zlib2.c
9013 # FLASH device drivers
9014 # doc: ref/flash.html
9015 # This option enables drivers for basic I/O services on
9018 cdl_package CYGPKG_IO_FLASH {
9019 # Packages cannot be added or removed, nor can their version be changed,
9020 # simply by editing their value. Instead the appropriate configuration
9021 # should be used to perform these actions.
9023 # This value cannot be modified here.
9025 # Current value: 1 current
9026 # Requires: CYGPKG_ISOINFRA
9027 # CYGPKG_ISOINFRA == current
9029 # Requires: CYGINT_ISO_STRING_STRFUNCS
9030 # CYGINT_ISO_STRING_STRFUNCS == 1
9033 # The following properties are affected by this value
9034 # component CYGSEM_REDBOOT_FLASH_CONFIG
9035 # DefaultValue: CYGPKG_IO_FLASH != 0
9036 # package CYGPKG_DEVS_FLASH_ONMXC
9037 # ActiveIf: CYGPKG_IO_FLASH
9041 # Hardware FLASH device drivers
9042 # This option enables the hardware device drivers
9043 # for the current platform.
9045 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9046 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9047 # This value cannot be modified here.
9051 # The following properties are affected by this value
9052 # component CYGPKG_REDBOOT_FLASH
9053 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9056 # Hardware FLASH device drivers are not in RAM
9057 # Use of this interface is deprecated.
9058 # Drivers should make sure that the functions are
9059 # linked to RAM by putting them in .2ram sections.
9061 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9062 # No options implement this inferface
9063 # This value cannot be modified here.
9065 # Current value: 0 0
9066 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9067 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9070 # The following properties are affected by this value
9071 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9072 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9075 # Hardware can support block locking
9076 # This option will be enabled by devices which can support
9077 # locking (write-protection) of individual blocks.
9079 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9080 # No options implement this inferface
9081 # This value cannot be modified here.
9083 # Current value: 0 0
9085 # The following properties are affected by this value
9086 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9087 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9090 # Hardware cannot support direct access to FLASH memory
9091 # This option will be asserted by devices which cannot support
9092 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9093 # devices). In these cases, the driver must provide an appropriate
9094 # hardware access function.
9096 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9098 # No user value, uncomment the following line to provide one.
9100 # The inferred value should not be edited directly.
9102 # value_source inferred
9104 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9105 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9108 # The following properties are affected by this value
9109 # option CYGPRI_REDBOOT_ZLIB_FLASH
9110 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9111 # component CYGHWR_DEVS_FLASH_MMC
9112 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9113 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9114 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9115 # option CYGHWR_DEVS_FLASH_MMC_SD
9116 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9117 # option CYGHWR_DEVS_FLASH_MXC_NAND
9118 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9121 # Display status messages during flash operations
9122 # Selecting this option will cause the drivers to print status
9123 # messages as various flash operations are undertaken.
9125 cdl_option CYGSEM_IO_FLASH_CHATTER {
9127 # No user value, uncomment the following line to provide one.
9129 # value_source default
9133 # Verify data programmed to flash
9134 # Selecting this option will cause verification of data
9135 # programmed to flash.
9137 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9139 # No user value, uncomment the following line to provide one.
9141 # The inferred value should not be edited directly.
9143 # value_source inferred
9146 # The following properties are affected by this value
9147 # option CYGSEM_IO_FLASH_READ_INDIRECT
9148 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9151 # Platform has flash soft DIP switch write-protect
9152 # Selecting this option will cause the state of a hardware jumper or
9153 # dipswitch to be read by software to determine whether the flash is
9154 # write-protected or not.
9156 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9158 # No user value, uncomment the following line to provide one.
9160 # value_source default
9164 # Instantiate in I/O block device API
9165 # Provides a block device accessible using the standard I/O
9166 # API ( cyg_io_read() etc. )
9168 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9169 # This option is not active
9170 # ActiveIf constraint: CYGPKG_IO
9171 # CYGPKG_IO (unknown) == 0
9175 # No user value, uncomment the following line to provide one.
9177 # value_source default
9182 # Name of flash device 1 block device
9184 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9185 # This option is not active
9186 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9187 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9190 # No user value, uncomment the following line to provide one.
9191 # user_value "\"/dev/flash1\""
9192 # value_source default
9193 # Default value: "\"/dev/flash1\""
9198 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9199 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9200 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9201 # This option is not active
9202 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9204 # This value cannot be modified here.
9207 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9208 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9211 # The following properties are affected by this value
9212 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9213 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9216 # Static configuration
9217 # This configures the flash device 1 block device
9218 # with static base and length
9220 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9221 # This option is not active
9222 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9225 # No user value, uncomment the following line to provide one.
9227 # value_source default
9232 # Start offset from flash base
9233 # This gives the offset from the base of flash which this
9234 # block device corresponds to.
9236 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9237 # This option is not active
9238 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9241 # No user value, uncomment the following line to provide one.
9242 # user_value 0x00100000
9243 # value_source default
9244 # Default value: 0x00100000
9248 # This gives the length of the region of flash given over
9249 # to this block device.
9251 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9252 # This option is not active
9253 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9256 # No user value, uncomment the following line to provide one.
9257 # user_value 0x00100000
9258 # value_source default
9259 # Default value: 0x00100000
9263 # Configuration from FIS
9264 # This configures the flash device 1 block device
9267 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9268 # This option is not active
9269 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9272 # No user value, uncomment the following line to provide one.
9274 # value_source default
9281 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9282 # This option is not active
9283 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9284 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9287 # No user value, uncomment the following line to provide one.
9288 # user_value "\"jffs2\""
9289 # value_source default
9290 # Default value: "\"jffs2\""
9296 # Flash device driver build options
9297 # Package specific build options including control over
9298 # compiler flags used only in building this package,
9299 # and details of which tests are built.
9301 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9302 # There is no associated value.
9306 # Additional compiler flags
9307 # This option modifies the set of compiler flags for
9308 # building the flash device drivers. These flags are used in addition
9309 # to the set of global flags.
9311 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9313 # No user value, uncomment the following line to provide one.
9315 # value_source default
9319 # Suppressed compiler flags
9320 # This option modifies the set of compiler flags for
9321 # building the flash device drivers. These flags are removed from
9322 # the set of global flags if present.
9324 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9326 # No user value, uncomment the following line to provide one.
9328 # value_source default
9332 # Flash device driver tests
9333 # This option specifies the set of tests for the flash device drivers.
9335 cdl_component CYGPKG_IO_FLASH_TESTS {
9336 # Calculated value: "tests/flash1"
9338 # Current_value: tests/flash1
9342 # Start offset from flash base
9343 # This gives the offset from the base of flash where tests
9344 # can be run. It is important to set this correctly, as an
9345 # incorrect value could allow the tests to write over critical
9346 # portions of the FLASH device and possibly render the target
9347 # board totally non-functional.
9349 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9351 # No user value, uncomment the following line to provide one.
9352 # user_value 0x00100000
9353 # value_source default
9354 # Default value: 0x00100000
9358 # This gives the length of the region of flash used for testing.
9360 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9362 # No user value, uncomment the following line to provide one.
9363 # user_value 0x00100000
9364 # value_source default
9365 # Default value: 0x00100000
9370 # Support FLASH memory on Freescale MXC platforms
9372 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9373 # Packages cannot be added or removed, nor can their version be changed,
9374 # simply by editing their value. Instead the appropriate configuration
9375 # should be used to perform these actions.
9377 # ActiveIf constraint: CYGPKG_IO_FLASH
9378 # CYGPKG_IO_FLASH == current
9381 # This value cannot be modified here.
9383 # Current value: 1 current
9387 # MXC platform MMC card support
9388 # When this option is enabled, it indicates MMC card is
9389 # supported on the MXC platforms
9391 cdl_component CYGHWR_DEVS_FLASH_MMC {
9393 # No user value, uncomment the following line to provide one.
9395 # value_source default
9397 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9398 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9401 # The following properties are affected by this value
9402 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9403 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9404 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9405 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9406 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9407 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9408 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9409 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9413 # MXC platform MMC card for newer SDHC controllers
9415 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9416 # This option is not active
9417 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9418 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9419 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9420 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9421 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9422 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9426 # No user value, uncomment the following line to provide one.
9428 # value_source default
9430 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9431 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9435 # MXC platform MMC card for older MMC/SD controllers
9437 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9438 # This option is not active
9439 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9440 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9441 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9442 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9446 # No user value, uncomment the following line to provide one.
9448 # value_source default
9450 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9451 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9456 # MXC platform NOR flash memory support
9457 # When this option is enabled, it indicates NOR flash is
9458 # supported on the MXC platforms
9460 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9462 # No user value, uncomment the following line to provide one.
9464 # The inferred value should not be edited directly.
9466 # value_source inferred
9469 # The following properties are affected by this value
9470 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9471 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9472 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9473 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9474 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9475 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9476 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9477 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9478 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9479 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9482 # MXC platform NAND flash memory support
9483 # When this option is enabled, it indicates NAND flash is
9484 # supported on the MXC platforms
9486 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9488 # No user value, uncomment the following line to provide one.
9490 # The inferred value should not be edited directly.
9492 # value_source inferred
9494 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9495 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9498 # The following properties are affected by this value
9499 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9500 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9501 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9502 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9503 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9504 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9505 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9506 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9507 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9508 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9509 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9510 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9513 # i.MX platform SPI NOR flash memory support
9514 # When this option is enabled, it indicates SPI NOR flash is
9515 # supported on the i.MX platforms
9517 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9519 # No user value, uncomment the following line to provide one.
9521 # value_source default
9523 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9524 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9528 # MXC platform ATA support
9529 # When this option is enabled, it indicates ATA is
9530 # supported on the MXC platforms
9532 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9534 # No user value, uncomment the following line to provide one.
9536 # value_source default
9540 # Use a flash based Bad Block Table
9542 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9543 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9544 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9547 # There is no associated value.
9551 # When this option is enabled, the driver will search for a flash
9552 # based bad block table
9554 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9556 # No user value, uncomment the following line to provide one.
9558 # value_source default
9562 # header file defining the NAND BBT descriptor
9563 # defines the name of the header file that describes the BBT layout
9565 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9567 # No user value, uncomment the following line to provide one.
9569 # The inferred value should not be edited directly.
9570 inferred_value 1 <cyg/io/tx25_nand_bbt.h>
9571 # value_source inferred
9572 # Default value: 0 0
9575 # Number of blocks to reserve for BBT
9576 # Number of blocks to reserve for BBT
9578 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9580 # No user value, uncomment the following line to provide one.
9582 # value_source default
9587 # MXC platform multi flash memory support
9588 # When this option is enabled, it indicates multi flashes are
9589 # supported on the MXC platforms (like NAND and NOR)
9591 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9592 # This option is not active
9593 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9594 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9595 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9596 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9597 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9598 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9599 # CYGHWR_DEVS_FLASH_MMC == 0
9600 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9601 # CYGHWR_DEVS_FLASH_MMC == 0
9605 # No user value, uncomment the following line to provide one.
9607 # The inferred value should not be edited directly.
9609 # value_source inferred
9613 # MXC platform NAND flash reset workaround support
9614 # When this option is enabled, it indicates 0xFFFF is used for
9615 # the NAND reset command instead of 0xFF.
9617 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9618 # No options implement this inferface
9619 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9620 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9623 # This value cannot be modified here.
9630 # Dynamic memory allocation
9631 # doc: ref/memalloc.html
9632 # This package provides memory allocator infrastructure required for
9633 # dynamic memory allocators, including the ISO standard malloc
9634 # interface. It also contains some sample implementations.
9636 cdl_package CYGPKG_MEMALLOC {
9637 # Packages cannot be added or removed, nor can their version be changed,
9638 # simply by editing their value. Instead the appropriate configuration
9639 # should be used to perform these actions.
9641 # This value cannot be modified here.
9643 # Current value: 1 current
9645 # The following properties are affected by this value
9646 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9647 # Requires: CYGPKG_MEMALLOC
9651 # Memory allocator implementations
9652 # This component contains configuration options related to the
9653 # various memory allocators available.
9655 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9656 # There is no associated value.
9660 # Fixed block allocator
9661 # This component contains configuration options related to the
9662 # fixed block memory allocator.
9664 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9665 # There is no associated value.
9670 # With this option enabled, this allocator will be
9671 # made thread-safe. Additionally allocation functions
9672 # are made available that allow a thread to wait
9673 # until memory is available.
9675 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9676 # This option is not active
9677 # ActiveIf constraint: CYGPKG_KERNEL
9678 # CYGPKG_KERNEL (unknown) == 0
9682 # No user value, uncomment the following line to provide one.
9684 # value_source default
9689 # Simple variable block allocator
9690 # This component contains configuration options related to the
9691 # simple variable block memory allocator. This allocator is not
9692 # very fast, and in particular does not scale well with large
9693 # numbers of allocations. It is however very compact in terms of
9694 # code size and does not have very much overhead per allocation.
9696 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9697 # There is no associated value.
9702 # With this option enabled, this allocator will be
9703 # made thread-safe. Additionally allocation functions
9704 # are added that allow a thread to wait until memory
9705 # are made available that allow a thread to wait
9706 # until memory is available.
9708 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9709 # This option is not active
9710 # ActiveIf constraint: CYGPKG_KERNEL
9711 # CYGPKG_KERNEL (unknown) == 0
9715 # No user value, uncomment the following line to provide one.
9717 # value_source default
9722 # The variable-block memory allocator can perform coalescing
9723 # of memory whenever the application code releases memory back
9724 # to the pool. This coalescing reduces the possibility of
9725 # memory fragmentation problems, but involves extra code and
9728 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9730 # No user value, uncomment the following line to provide one.
9732 # value_source default
9735 # The following properties are affected by this value
9736 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9737 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9742 # This component contains configuration options related to the
9743 # port of Doug Lea's memory allocator, normally known as
9744 # dlmalloc. dlmalloc has a reputation for being both fast
9745 # and space-conserving, as well as resisting fragmentation well.
9746 # It is a common choice for a general purpose allocator and
9747 # has been used in both newlib and Linux glibc.
9749 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9750 # There is no associated value.
9755 # Doug Lea's malloc implementation has substantial amounts
9756 # of internal checking in order to verify the operation
9757 # and consistency of the allocator. However this imposes
9758 # substantial overhead on each operation. Therefore this
9759 # checking may be individually disabled.
9761 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9763 # No user value, uncomment the following line to provide one.
9765 # value_source default
9766 # Default value: 0 != CYGDBG_USE_ASSERTS
9767 # CYGDBG_USE_ASSERTS == 0
9769 # Requires: CYGDBG_USE_ASSERTS
9770 # CYGDBG_USE_ASSERTS == 0
9775 # With this option enabled, this allocator will be
9776 # made thread-safe. Additionally allocation functions
9777 # are made available that allow a thread to wait
9778 # until memory is available.
9780 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9781 # This option is not active
9782 # ActiveIf constraint: CYGPKG_KERNEL
9783 # CYGPKG_KERNEL (unknown) == 0
9787 # No user value, uncomment the following line to provide one.
9789 # value_source default
9791 # Requires: CYGPKG_KERNEL
9792 # CYGPKG_KERNEL (unknown) == 0
9796 # Support more than one instance
9797 # Having this option disabled allows important
9798 # implementation structures to be declared as a single
9799 # static instance, allowing faster access. However this
9800 # would fail if there is more than one instance of
9801 # the dlmalloc allocator class. Therefore this option can
9802 # be enabled if multiple instances are required. Note: as
9803 # a special case, if this allocator is used as the
9804 # implementation of malloc, and it can be determined there
9805 # is more than one malloc pool, then this option will be
9808 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9810 # No user value, uncomment the following line to provide one.
9812 # value_source default
9816 # Use system memmove() and memset()
9817 # This may be used to control whether memset() and memmove()
9818 # are used within the implementation. The alternative is
9819 # to use some macro equivalents, which some people report
9820 # are faster in some circumstances.
9822 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9824 # No user value, uncomment the following line to provide one.
9826 # value_source default
9827 # Default value: 0 != CYGPKG_ISOINFRA
9828 # CYGPKG_ISOINFRA == current
9830 # Requires: CYGPKG_ISOINFRA
9831 # CYGPKG_ISOINFRA == current
9835 # Minimum alignment of allocated blocks
9836 # This option controls the minimum alignment that the
9837 # allocated memory blocks are aligned on, specified as
9838 # 2^N. Note that using large mininum alignments can lead
9839 # to excessive memory wastage.
9841 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9843 # No user value, uncomment the following line to provide one.
9845 # value_source default
9847 # Legal values: 3 to 10
9851 # Variable block allocator with separate metadata
9852 # This component contains configuration options related to the
9853 # variable block memory allocator with separate metadata.
9855 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9856 # There is no associated value.
9861 # With this option enabled, this allocator will be
9862 # made thread-safe. Additionally allocation functions
9863 # are made available that allow a thread to wait
9864 # until memory is available.
9866 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9867 # This option is not active
9868 # ActiveIf constraint: CYGPKG_KERNEL
9869 # CYGPKG_KERNEL (unknown) == 0
9873 # No user value, uncomment the following line to provide one.
9875 # value_source default
9881 # Kernel C API support for memory allocation
9882 # This option must be enabled to provide the extensions required
9883 # to support integration into the kernel C API.
9885 cdl_option CYGFUN_MEMALLOC_KAPI {
9886 # This option is not active
9887 # ActiveIf constraint: CYGPKG_KERNEL
9888 # CYGPKG_KERNEL (unknown) == 0
9892 # No user value, uncomment the following line to provide one.
9894 # value_source default
9895 # Default value: CYGFUN_KERNEL_API_C
9896 # CYGFUN_KERNEL_API_C (unknown) == 0
9900 # malloc(0) returns NULL
9901 # This option controls the behavior of malloc(0) ( or calloc with
9902 # either argument 0 ). It is permitted by the standard to return
9903 # either a NULL pointer or a unique pointer. Enabling this option
9904 # forces a NULL pointer to be returned.
9906 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9908 # No user value, uncomment the following line to provide one.
9910 # value_source default
9914 # Breakpoint site when running out of memory
9915 # Whenever the system runs out of memory, it invokes this function
9916 # before either going to sleep waiting for memory to become
9917 # available or returning failure.
9919 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9921 # No user value, uncomment the following line to provide one.
9923 # value_source default
9927 # malloc() and supporting allocators
9928 # This component enables support for dynamic memory
9929 # allocation as supplied by the functions malloc(),
9930 # free(), calloc() and realloc(). As these
9931 # functions are often used, but can have quite an
9932 # overhead, disabling them here can ensure they
9933 # cannot even be used accidentally when static
9934 # allocation is preferred. Within this component are
9935 # various allocators that can be selected for use
9936 # as the underlying implementation of the dynamic
9937 # allocation functions.
9939 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
9940 # ActiveIf constraint: CYGPKG_ISOINFRA
9941 # CYGPKG_ISOINFRA == current
9945 # No user value, uncomment the following line to provide one.
9947 # value_source default
9952 # Use external heap definition
9953 # This option allows other components in the
9954 # system to override the default system
9955 # provision of heap memory pools. This should
9956 # be set to a header which provides the equivalent
9957 # definitions to <pkgconf/heaps.hxx>.
9959 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
9961 # No user value, uncomment the following line to provide one.
9963 # value_source default
9964 # Default value: 0 0
9967 # Use external implementation of joining multiple heaps
9968 # The default implementation of joining multiple heaps
9969 # is fine for the case where there are multiple disjoint
9970 # memory regions of the same type. However, in a system
9971 # there might be e.g. a small amount of internal SRAM and
9972 # a large amount of external DRAM. The SRAM is faster and
9973 # the DRAM is slower. An application can implement some
9974 # heuristic to choose which pool to allocate from. This
9975 # heuristic can be highly application specific.
9977 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
9979 # No user value, uncomment the following line to provide one.
9981 # value_source default
9982 # Default value: 0 0
9985 # malloc() allocator implementations
9987 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
9988 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
9989 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
9990 # This value cannot be modified here.
9993 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9994 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
9997 # The following properties are affected by this value
9998 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
9999 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10002 # malloc() implementation instantiation data
10003 # Memory allocator implementations that are capable of being
10004 # used underneath malloc() must be instantiated. The code
10005 # to do this is set in this option. It is only intended to
10006 # be set by the implementation, not the user.
10008 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10010 # No user value, uncomment the following line to provide one.
10011 # user_value <cyg/memalloc/dlmalloc.hxx>
10012 # value_source default
10013 # Default value: <cyg/memalloc/dlmalloc.hxx>
10015 # The following properties are affected by this value
10016 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10017 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10018 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10019 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10022 # Simple variable block implementation
10023 # This causes malloc() to use the simple
10024 # variable block allocator.
10026 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10028 # No user value, uncomment the following line to provide one.
10030 # value_source default
10032 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10033 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10035 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10036 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10040 # Doug Lea's malloc implementation
10041 # This causes malloc() to use a version of Doug Lea's
10042 # malloc (dlmalloc) as the underlying implementation.
10044 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10046 # No user value, uncomment the following line to provide one.
10048 # value_source default
10050 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10051 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10056 # Size of the fallback dynamic memory pool in bytes
10057 # If *no* heaps are configured in your memory layout,
10058 # dynamic memory allocation by
10059 # malloc() and calloc() must be from a fixed-size,
10060 # contiguous memory pool (note here that it is the
10061 # pool that is of a fixed size, but malloc() is still
10062 # able to allocate variable sized chunks of memory
10063 # from it). This option is the size
10064 # of that pool, in bytes. Note that not all of
10065 # this is available for programs to
10066 # use - some is needed for internal information
10067 # about memory regions, and some may be lost to
10068 # ensure that memory allocation only returns
10069 # memory aligned on word (or double word)
10070 # boundaries - a very common architecture
10073 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10075 # No user value, uncomment the following line to provide one.
10077 # value_source default
10078 # Default value: 16384
10079 # Legal values: 32 to 0x7fffffff
10082 # Common memory allocator package build options
10083 # Package specific build options including control over
10084 # compiler flags used only in building this package,
10085 # and details of which tests are built.
10087 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10088 # There is no associated value.
10092 # Additional compiler flags
10093 # This option modifies the set of compiler flags for
10094 # building this package. These flags are used in addition
10095 # to the set of global flags.
10097 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10099 # No user value, uncomment the following line to provide one.
10100 # user_value "-fno-rtti -Woverloaded-virtual"
10101 # value_source default
10102 # Default value: "-fno-rtti -Woverloaded-virtual"
10105 # Suppressed compiler flags
10106 # This option modifies the set of compiler flags for
10107 # building this package. These flags are removed from
10108 # the set of global flags if present.
10110 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10112 # No user value, uncomment the following line to provide one.
10113 # user_value -Wno-pointer-sign
10114 # value_source default
10115 # Default value: -Wno-pointer-sign
10119 # This option specifies the set of tests for this package.
10121 cdl_option CYGPKG_MEMALLOC_TESTS {
10122 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10124 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10129 # Common error code support
10130 # This package contains the common list of error and
10131 # status codes. It is held centrally to allow
10132 # packages to interchange error codes and status
10133 # codes in a common way, rather than each package
10134 # having its own conventions for error/status
10135 # reporting. The error codes are modelled on the
10136 # POSIX style naming e.g. EINVAL etc. This package
10137 # also provides the standard strerror() function to
10138 # convert error codes to textual representation, as
10139 # well as an implementation of the errno idiom.
10141 cdl_package CYGPKG_ERROR {
10142 # Packages cannot be added or removed, nor can their version be changed,
10143 # simply by editing their value. Instead the appropriate configuration
10144 # should be used to perform these actions.
10146 # This value cannot be modified here.
10148 # Current value: 1 current
10149 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10150 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10156 # This package controls the behaviour of the
10157 # errno variable (or more strictly, expression)
10160 cdl_component CYGPKG_ERROR_ERRNO {
10162 # No user value, uncomment the following line to provide one.
10164 # value_source default
10166 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10167 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10173 # This option controls whether the standard error
10174 # code reporting variable errno is a per-thread
10175 # variable, rather than global.
10177 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10179 # No user value, uncomment the following line to provide one.
10181 # The inferred value should not be edited directly.
10183 # value_source inferred
10185 # Requires: CYGVAR_KERNEL_THREADS_DATA
10186 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10191 # Trace verbosity level for debugging the errno
10192 # retrieval mechanism in errno.cxx. Increase this
10193 # value to get additional trace output.
10195 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10197 # No user value, uncomment the following line to provide one.
10199 # value_source default
10201 # Legal values: 0 to 1
10205 # strerror function
10206 # This package controls the presence and behaviour of the
10207 # strerror() function from <string.h>
10209 cdl_option CYGPKG_ERROR_STRERROR {
10211 # No user value, uncomment the following line to provide one.
10213 # value_source default
10215 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10216 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10220 # Error package build options
10221 # Package specific build options including control over
10222 # compiler flags used only in building this package,
10223 # and details of which tests are built.
10225 cdl_component CYGPKG_ERROR_OPTIONS {
10226 # There is no associated value.
10230 # Additional compiler flags
10231 # This option modifies the set of compiler flags for
10232 # building the error package. These flags are used in addition
10233 # to the set of global flags.
10235 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10237 # No user value, uncomment the following line to provide one.
10239 # value_source default
10240 # Default value: ""
10243 # Suppressed compiler flags
10244 # This option modifies the set of compiler flags for
10245 # building the error package. These flags are removed from
10246 # the set of global flags if present.
10248 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10250 # No user value, uncomment the following line to provide one.
10252 # value_source default
10253 # Default value: ""