1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX51 current ;
34 package -hardware CYGPKG_HAL_ARM_TX51KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX51 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 user_value arm-cortexa8-linux-gnu
81 # Default value: arm-926ejs-linux-gnu
84 # Global compiler flags
85 # This option controls the global compiler flags which are used to
86 # compile all packages by default. Individual packages may define
87 # options which override these global flags.
89 cdl_option CYGBLD_GLOBAL_CFLAGS {
91 user_value "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
92 # The inferred value should not be edited directly.
93 inferred_value "-mcpu=arm9 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
95 # Default value: "-march=armv5 -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
97 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
100 # The following properties are affected by this value
101 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
102 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
103 # option CYGBLD_INFRA_CFLAGS_PIPE
104 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
107 # Global linker flags
108 # This option controls the global linker flags. Individual
109 # packages may define options which override these global flags.
111 cdl_option CYGBLD_GLOBAL_LDFLAGS {
113 # No user value, uncomment the following line to provide one.
114 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
115 # value_source default
116 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
119 # Build common GDB stub ROM image
120 # Unless a target board has specific requirements to the
121 # stub implementation, it can use a simple common stub.
122 # This option, which gets enabled by platform HALs as
123 # appropriate, controls the building of the common stub.
125 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
127 # No user value, uncomment the following line to provide one.
129 # value_source default
131 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
132 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
137 # ISO C library string functions
139 # This package provides string functions specified by the
140 # ISO C standard - ISO/IEC 9899:1990.
142 cdl_package CYGPKG_LIBC_STRING {
143 # Packages cannot be added or removed, nor can their version be changed,
144 # simply by editing their value. Instead the appropriate configuration
145 # should be used to perform these actions.
147 # This value cannot be modified here.
149 # Current value: 1 current
150 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
151 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
153 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
154 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
156 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGPKG_ISOINFRA
163 # CYGPKG_ISOINFRA == current
168 # Inline versions of <string.h> functions
169 # This option chooses whether some of the
170 # particularly simple string functions from
171 # <string.h> are available as inline
172 # functions. This may improve performance, and as
173 # the functions are small, may even improve code
176 cdl_option CYGIMP_LIBC_STRING_INLINES {
178 # No user value, uncomment the following line to provide one.
180 # value_source default
184 # Optimize string functions for code size
185 # This option tries to reduce string function
186 # code size at the expense of execution speed. The
187 # same effect can be produced if the code is
188 # compiled with the -Os option to the compiler.
190 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
192 # No user value, uncomment the following line to provide one.
194 # value_source default
198 # Provide BSD compatibility functions
199 # Enabling this option causes various compatibility functions
200 # commonly found in the BSD UNIX operating system to be included.
201 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
202 # strncasecmp, index, rindex and swab.
204 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
206 # No user value, uncomment the following line to provide one.
208 # The inferred value should not be edited directly.
210 # value_source inferred
212 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
213 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
215 # Requires: CYGINT_ISO_CTYPE
216 # CYGINT_ISO_CTYPE == 1
221 # These options control the behaviour of the
222 # strtok() and strtok_r() string tokenization
225 cdl_component CYGPKG_LIBC_STRING_STRTOK {
226 # There is no associated value.
230 # Per-thread strtok()
231 # This option controls whether the string function
232 # strtok() has its state recorded on a per-thread
233 # basis rather than global. If this option is
234 # disabled, some per-thread space can be saved.
235 # Note there is also a POSIX-standard strtok_r()
236 # function to achieve a similar effect with user
237 # support. Enabling this option will use one slot
238 # of kernel per-thread data. You should ensure you
239 # have enough slots configured for all your
242 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
243 # This option is not active
244 # ActiveIf constraint: CYGPKG_KERNEL
245 # CYGPKG_KERNEL (unknown) == 0
249 # No user value, uncomment the following line to provide one.
251 # value_source default
252 # Default value: CYGVAR_KERNEL_THREADS_DATA
253 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
255 # Requires: CYGVAR_KERNEL_THREADS_DATA
256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Trace verbosity level for debugging the <string.h>
262 # functions strtok() and strtok_r(). Increase this
263 # value to get additional trace output.
265 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
267 # No user value, uncomment the following line to provide one.
269 # value_source default
271 # Legal values: 0 to 1
276 # This option indicates whether strdup() is to be supported.
278 cdl_option CYGFUN_LIBC_STRING_STRDUP {
279 # ActiveIf constraint: CYGINT_ISO_MALLOC
280 # CYGINT_ISO_MALLOC == 1
283 # Calculated value: 1
288 # C library string functions build options
289 # Package specific build options including control over
290 # compiler flags used only in building this package,
291 # and details of which tests are built.
293 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
294 # There is no associated value.
298 # Additional compiler flags
299 # This option modifies the set of compiler flags for
300 # building the C library. These flags are used in addition
301 # to the set of global flags.
303 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
305 # No user value, uncomment the following line to provide one.
306 # user_value "-fno-rtti -Woverloaded-virtual"
307 # value_source default
308 # Default value: "-fno-rtti -Woverloaded-virtual"
311 # Suppressed compiler flags
312 # This option modifies the set of compiler flags for
313 # building the C library. These flags are removed from
314 # the set of global flags if present.
316 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
318 # No user value, uncomment the following line to provide one.
319 # user_value -Wno-pointer-sign
320 # value_source default
321 # Default value: -Wno-pointer-sign
324 # C library string function tests
325 # This option specifies the set of tests for the C library
328 cdl_option CYGPKG_LIBC_STRING_TESTS {
329 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
331 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
336 # Common ethernet support
337 # doc: ref/io-eth-drv-generic.html
338 # Platform independent ethernet drivers
340 cdl_package CYGPKG_IO_ETH_DRIVERS {
341 # Packages cannot be added or removed, nor can their version be changed,
342 # simply by editing their value. Instead the appropriate configuration
343 # should be used to perform these actions.
345 # This value cannot be modified here.
347 # Current value: 1 current
349 # The following properties are affected by this value
350 # component CYGPKG_REDBOOT_NETWORKING
351 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
352 # package CYGPKG_DEVS_ETH_ARM_TX51
353 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
354 # package CYGPKG_DEVS_ETH_FEC
355 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
356 # package CYGPKG_DEVS_ETH_PHY
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
363 cdl_interface CYGHWR_NET_DRIVERS {
364 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
365 # This value cannot be modified here.
369 # The following properties are affected by this value
370 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
371 # ActiveIf: CYGHWR_NET_DRIVERS > 1
372 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
373 # ActiveIf: CYGHWR_NET_DRIVERS > 1
376 # Driver supports multicast addressing
377 # This interface defines whether or not a driver can handle
378 # requests for multicast addressing.
380 cdl_interface CYGINT_IO_ETH_MULTICAST {
381 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
382 # This value cannot be modified here.
386 # The following properties are affected by this value
389 # Support printing driver debug information
390 # Selecting this option will include code to allow the driver to
391 # print lots of information on diagnostic output such as full
394 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
396 # No user value, uncomment the following line to provide one.
398 # value_source default
403 # Driver debug output verbosity
404 # The value of this option indicates the default verbosity
405 # level of debugging output. 0 means no debugging output
406 # is made by default. Higher values indicate higher verbosity.
407 # The verbosity level may also be changed at run time by
408 # changing the variable cyg_io_eth_net_debug.
410 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
412 # No user value, uncomment the following line to provide one.
414 # value_source default
419 # Size of scatter-gather I/O lists
420 # A scatter-gather list is used to pass requests to/from
421 # the physical device driver. This list can typically be
422 # small, as the data is normally already packed into reasonable
425 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
427 # No user value, uncomment the following line to provide one.
429 # value_source default
433 # Support for standard eCos TCP/IP stack.
435 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
436 # This option is not active
437 # ActiveIf constraint: CYGPKG_NET
438 # CYGPKG_NET (unknown) == 0
442 # No user value, uncomment the following line to provide one.
444 # value_source default
446 # Requires: CYGINT_ISO_STRING_STRFUNCS
447 # CYGINT_ISO_STRING_STRFUNCS == 1
452 # Warn when there are no more mbufs
453 # Warnings about running out of mbufs are printed to the
454 # diagnostic output channel via diag_printf() if this option
455 # is enabled. Mbufs are the network stack's basic dynamic
456 # memory objects that hold all packets in transit; running
457 # out is bad for performance but not fatal, not a crash.
458 # You might want to turn off the warnings to preserve realtime
459 # properties of the system even in extremis.
461 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
462 # This option is not active
463 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
466 # No user value, uncomment the following line to provide one.
468 # value_source default
472 # Simulate network failures for testing
473 # This package contains a suite of simulated failure modes
474 # for the ethernet device layer, including dropping and/or
475 # corrupting received packets, dropping packets queued for
476 # transmission, and simulating a complete network break.
477 # It requires the kernel as a source of time information.
479 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
480 # This option is not active
481 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
484 # No user value, uncomment the following line to provide one.
486 # value_source default
491 # Drop incoming packets (percentage)
493 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
494 # This option is not active
495 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
496 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
499 # No user value, uncomment the following line to provide one.
501 # value_source default
502 # Default value: 1 10
503 # Legal values: 10 50 80
506 # Corrupt incoming packets (percentage)
508 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
509 # This option is not active
510 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
511 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
514 # No user value, uncomment the following line to provide one.
516 # value_source default
517 # Default value: 1 10
518 # Legal values: 10 50 80
521 # Drop outgoing packets (percentage)
523 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
524 # This option is not active
525 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
526 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
529 # No user value, uncomment the following line to provide one.
531 # value_source default
532 # Default value: 1 10
533 # Legal values: 10 50 80
536 # Simulate a line cut from time to time
537 # This option causes the system to drop all packets for a
538 # short random period (10s of seconds), and then act
539 # normally for up to 4 times that long. This simulates your
540 # sysadmin fiddling with plugs in the network switch
543 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
544 # This option is not active
545 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
546 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
549 # No user value, uncomment the following line to provide one.
551 # value_source default
557 # Support for stand-alone network stack.
559 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
560 # ActiveIf constraint: !CYGPKG_NET
561 # CYGPKG_NET (unknown) == 0
565 # No user value, uncomment the following line to provide one.
567 # value_source default
569 # Requires: CYGINT_ISO_STRING_MEMFUNCS
570 # CYGINT_ISO_STRING_MEMFUNCS == 1
575 # Pass packets to an alternate stack
576 # Define this to allow packets seen by this layer to be
577 # passed on to the previous logical layer, i.e. when
578 # stand-alone processing replaces system (eCos) processing.
580 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
582 # No user value, uncomment the following line to provide one.
584 # value_source default
585 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
586 # CYGPKG_REDBOOT_NETWORKING == 1
590 # Number of [network] buffers
591 # This option is used to allocate space to buffer incoming network
592 # packets. These buffers are used to hold data until they can be
593 # logically processed by higher layers.
595 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
597 # No user value, uncomment the following line to provide one.
599 # value_source default
601 # Legal values: 2 to 32
604 # Show driver warnings
605 # Selecting this option will allows the stand-alone ethernet driver
606 # to display warnings on the system console when incoming network
607 # packets are being discarded due to lack of buffer space.
609 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
610 # ActiveIf constraint: CYGPKG_REDBOOT
611 # CYGPKG_REDBOOT == current
615 # No user value, uncomment the following line to provide one.
617 # value_source default
622 # Support for lwIP network stack.
624 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
625 # This option is not active
626 # ActiveIf constraint: CYGPKG_NET_LWIP
627 # CYGPKG_NET_LWIP (unknown) == 0
631 # No user value, uncomment the following line to provide one.
633 # value_source default
635 # Requires: !CYGPKG_NET
636 # CYGPKG_NET (unknown) == 0
640 # Interrupt support required
641 # This interface is used to indicate to the low
642 # level device drivers that interrupt driven operation
643 # is required by higher layers.
645 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
646 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
647 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
648 # This value cannot be modified here.
652 # The following properties are affected by this value
655 # Common ethernet support build options
657 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
658 # There is no associated value.
662 # Additional compiler flags
663 # This option modifies the set of compiler flags for
664 # building the common ethernet support package. These flags are used in addition
665 # to the set of global flags.
667 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
669 # No user value, uncomment the following line to provide one.
670 # user_value "-D_KERNEL -D__ECOS"
671 # value_source default
672 # Default value: "-D_KERNEL -D__ECOS"
676 # Ethernet driver for Ka-Ro electronics TX51 processor module
678 cdl_package CYGPKG_DEVS_ETH_ARM_TX51 {
679 # Packages cannot be added or removed, nor can their version be changed,
680 # simply by editing their value. Instead the appropriate configuration
681 # should be used to perform these actions.
683 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
684 # CYGPKG_IO_ETH_DRIVERS == current
687 # This value cannot be modified here.
689 # Current value: 1 current
693 # FEC ethernet driver required
695 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
696 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
697 # This value cannot be modified here.
701 # The following properties are affected by this value
702 # package CYGPKG_DEVS_ETH_FEC
703 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
706 # Ka-Ro TX51 ethernet port driver
707 # This option includes the ethernet device driver for the
710 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
712 # No user value, uncomment the following line to provide one.
714 # value_source default
716 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
717 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
719 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
720 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
725 # Device name for the ETH0 ethernet driver
726 # This option sets the name of the ethernet device.
728 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
730 # No user value, uncomment the following line to provide one.
731 # user_value "\"eth0\""
732 # value_source default
733 # Default value: "\"eth0\""
736 # OUI part of MAC address
737 # This option sets OUI part (manufacturer ID) of the MAC address
740 cdl_option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI {
741 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
742 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
746 # No user value, uncomment the following line to provide one.
747 # user_value "{ 0x00, 0x0c, 0xc6 }"
748 # value_source default
749 # Default value: "{ 0x00, 0x0c, 0xc6 }"
754 # Driver for fast ethernet controller.
755 # Driver for fast ethernet controller.
757 cdl_package CYGPKG_DEVS_ETH_FEC {
758 # Packages cannot be added or removed, nor can their version be changed,
759 # simply by editing their value. Instead the appropriate configuration
760 # should be used to perform these actions.
762 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
763 # CYGPKG_IO_ETH_DRIVERS == current
765 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
766 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
769 # This value cannot be modified here.
771 # Current value: 1 current
775 # MXC FEC ethernet driver build options
777 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
778 # There is no associated value.
782 # Additional compiler flags
783 # This option modifies the set of compiler flags for
784 # building the Cirrus Logic ethernet driver package.
785 # These flags are used in addition
786 # to the set of global flags.
788 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
790 # No user value, uncomment the following line to provide one.
791 # user_value "-D_KERNEL -D__ECOS"
792 # value_source default
793 # Default value: "-D_KERNEL -D__ECOS"
797 # MXC FEC MII Gasket for RMII mode
798 # This option enables the use of the MII Gasket for
799 # RMII mode found in i.MX25 and i.MX53 processors.
801 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
802 # This option is not active
803 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
804 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
805 # CYGPKG_HAL_ARM_MX53 (unknown) == 0
809 # No user value, uncomment the following line to provide one.
811 # value_source default
816 # Ethernet transceiver (PHY) support
817 # API for ethernet PHY devices
819 cdl_package CYGPKG_DEVS_ETH_PHY {
820 # Packages cannot be added or removed, nor can their version be changed,
821 # simply by editing their value. Instead the appropriate configuration
822 # should be used to perform these actions.
824 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
825 # CYGPKG_IO_ETH_DRIVERS == current
828 # This value cannot be modified here.
830 # Current value: 1 current
831 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
832 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
837 # Enable driver debugging
838 # Enables the diagnostic debug messages on the
841 cdl_option CYGDBG_DEVS_ETH_PHY {
843 # No user value, uncomment the following line to provide one.
845 # value_source default
849 # Time period (seconds) to wait for auto-negotiation
850 # The length of time to wait for auto-negotiation to complete
851 # before giving up and declaring the link dead/missing.
853 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
855 # No user value, uncomment the following line to provide one.
857 # value_source default
862 # Include support for National Semiconductor DP83847 DsPHYTER II
864 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
866 # No user value, uncomment the following line to provide one.
868 # value_source default
873 # Include support for AMD 79C874 NetPHY
875 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
877 # No user value, uncomment the following line to provide one.
879 # value_source default
884 # Include support for Intel LXT972xxx PHY
886 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
888 # No user value, uncomment the following line to provide one.
890 # value_source default
895 # Include support for ICS 1890 PHY
897 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
899 # No user value, uncomment the following line to provide one.
901 # value_source default
906 # Include support for ICS 1892 PHY
908 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
910 # No user value, uncomment the following line to provide one.
912 # value_source default
917 # Include support for ICS 1893 and 1893AF PHY
919 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
921 # No user value, uncomment the following line to provide one.
923 # value_source default
928 # Include support for the Davicom DM9161A PHY
930 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
932 # No user value, uncomment the following line to provide one.
934 # value_source default
939 # Include support for the Micrel KS8721 PHY
941 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
943 # No user value, uncomment the following line to provide one.
945 # value_source default
950 # Include support for SMSC LAN8700 NetPHY
952 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
954 # No user value, uncomment the following line to provide one.
956 # The inferred value should not be edited directly.
958 # value_source inferred
961 # The following properties are affected by this value
962 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
963 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
968 # ISO C library internationalization functions
970 # This package provides internationalization functions specified by the
971 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
972 # functionality and <ctype.h> functionality.
974 cdl_package CYGPKG_LIBC_I18N {
975 # Packages cannot be added or removed, nor can their version be changed,
976 # simply by editing their value. Instead the appropriate configuration
977 # should be used to perform these actions.
979 # This value cannot be modified here.
981 # Current value: 1 current
982 # Requires: CYGPKG_ISOINFRA
983 # CYGPKG_ISOINFRA == current
989 # These options determine which locales other than the "C" locale
990 # are supported and hence contribute to the size of the executable.
992 cdl_component CYGPKG_LIBC_I18N_LOCALES {
993 # There is no associated value.
997 # Support for multiple locales required
999 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1000 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1001 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1002 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1003 # This value cannot be modified here.
1005 # Current value: 0 0
1006 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1007 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1010 # The following properties are affected by this value
1013 # C-SJIS locale support
1014 # This option controls if the "C-SJIS" locale will be
1015 # supported by setlocale(). The locale is a hybrid locale
1016 # that is mostly the "C" locale with Japanese SJIS multibyte
1019 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1021 # No user value, uncomment the following line to provide one.
1023 # value_source default
1026 # The following properties are affected by this value
1027 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1028 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1029 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1030 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1033 # C-JIS locale support
1034 # This option controls if the "C-JIS" locale will be
1035 # supported by setlocale(). The locale is a hybrid locale
1036 # that is mostly the "C" locale with Japanese JIS multibyte
1039 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1041 # No user value, uncomment the following line to provide one.
1043 # value_source default
1046 # The following properties are affected by this value
1047 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1048 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1049 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1050 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1053 # C-EUCJP locale support
1054 # This option controls if the "C-EUCJP" locale will be
1055 # supported by setlocale(). The locale is a hybrid locale
1056 # that is mostly the "C" locale with Japanese EUCJP multibyte
1059 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1061 # No user value, uncomment the following line to provide one.
1063 # value_source default
1066 # The following properties are affected by this value
1067 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1068 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1069 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1070 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1074 # Newlib's ctype implementation
1075 # This option enables the implementation of the ctype functions
1076 # that comes with newlib. It is table driven and therefore
1077 # exhibits different performance characteristics. It also offers
1078 # a limited amount of binary compatibility
1079 # with newlib so that programs linked against newlib ctype/locale
1080 # do not need to be recompiled when linked with eCos.
1082 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1084 # No user value, uncomment the following line to provide one.
1086 # value_source default
1088 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1089 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1093 # Per-thread multibyte state
1094 # This option controls whether the multibyte character
1095 # handling functions mblen(), mbtowc(), and wctomb(),
1096 # have their state recorded on a per-thread
1097 # basis rather than global. If this option is
1098 # disabled, some per-thread space can be saved.
1099 # Enabling this option will use three slots
1100 # of kernel per-thread data. You should ensure you
1101 # have enough slots configured for all your
1104 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1105 # This option is not active
1106 # ActiveIf constraint: CYGPKG_KERNEL
1107 # CYGPKG_KERNEL (unknown) == 0
1111 # No user value, uncomment the following line to provide one.
1113 # value_source default
1114 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1115 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1117 # Requires: CYGVAR_KERNEL_THREADS_DATA
1118 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Size of locale name strings
1123 # This option controls the maximum size of
1124 # locale names and is used, among other things
1125 # to instantiate a static string used
1126 # as a return value from the
1127 # setlocale() function. When requesting the
1128 # current locale settings with LC_ALL, a string
1129 # must be constructed to contain this data, rather
1130 # than just returning a constant string. This
1131 # string data is stored in the static string.
1132 # This depends on the length of locale names,
1133 # hence this option. If just the C locale is
1134 # present, this option can be set as low as 2.
1136 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1138 # No user value, uncomment the following line to provide one.
1140 # value_source default
1141 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1142 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1143 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1144 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1146 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1152 # Inline versions of <ctype.h> functions
1153 # This option chooses whether the simple character
1154 # classification and conversion functions (e.g.
1155 # isupper(), isalpha(), toupper(), etc.)
1156 # from <ctype.h> are available as inline
1157 # functions. This may improve performance and as
1158 # the functions are small, may even improve code
1161 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1163 # No user value, uncomment the following line to provide one.
1165 # value_source default
1167 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1168 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1172 # C library i18n functions build options
1173 # Package specific build options including control over
1174 # compiler flags used only in building this package,
1175 # and details of which tests are built.
1177 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1178 # There is no associated value.
1182 # Additional compiler flags
1183 # This option modifies the set of compiler flags for
1184 # building the C library. These flags are used in addition
1185 # to the set of global flags.
1187 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1189 # No user value, uncomment the following line to provide one.
1190 # user_value "-fno-rtti -Woverloaded-virtual"
1191 # value_source default
1192 # Default value: "-fno-rtti -Woverloaded-virtual"
1195 # Suppressed compiler flags
1196 # This option modifies the set of compiler flags for
1197 # building the C library. These flags are removed from
1198 # the set of global flags if present.
1200 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1202 # No user value, uncomment the following line to provide one.
1203 # user_value -Wno-pointer-sign
1204 # value_source default
1205 # Default value: -Wno-pointer-sign
1208 # C library i18n function tests
1209 # This option specifies the set of tests for the C library
1212 cdl_option CYGPKG_LIBC_I18N_TESTS {
1213 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1215 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1220 # ISO C library general utility functions
1221 # doc: ref/libc.html
1222 # This package provides general utility functions in <stdlib.h>
1223 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1225 cdl_package CYGPKG_LIBC_STDLIB {
1226 # Packages cannot be added or removed, nor can their version be changed,
1227 # simply by editing their value. Instead the appropriate configuration
1228 # should be used to perform these actions.
1230 # This value cannot be modified here.
1232 # Current value: 1 current
1233 # Requires: CYGPKG_ISOINFRA
1234 # CYGPKG_ISOINFRA == current
1236 # Requires: CYGINT_ISO_CTYPE
1237 # CYGINT_ISO_CTYPE == 1
1239 # Requires: CYGINT_ISO_STRING_STRFUNCS
1240 # CYGINT_ISO_STRING_STRFUNCS == 1
1245 # Inline versions of <stdlib.h> functions
1246 # This option chooses whether some of the
1247 # particularly simple standard utility functions
1248 # from <stdlib.h> are available as inline
1249 # functions. This may improve performance, and as
1250 # the functions are small, may even improve code
1253 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1254 # There is no associated value.
1260 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1262 # No user value, uncomment the following line to provide one.
1264 # value_source default
1266 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1267 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1273 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1275 # No user value, uncomment the following line to provide one.
1277 # value_source default
1279 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1280 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1284 # atof() / atoi() / atol()
1286 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1288 # No user value, uncomment the following line to provide one.
1290 # value_source default
1292 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1293 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1298 # Random number generation
1299 # These options control the behaviour of the
1300 # functions rand(), srand() and rand_r()
1302 cdl_component CYGPKG_LIBC_RAND {
1303 # There is no associated value.
1307 # Per-thread random seed
1308 # doc: ref/libc-thread-safety.html
1309 # This option controls whether the pseudo-random
1310 # number generation functions rand() and srand()
1311 # have their state recorded on a per-thread
1312 # basis rather than global. If this option is
1313 # disabled, some per-thread space can be saved.
1314 # Note there is also a POSIX-standard rand_r()
1315 # function to achieve a similar effect with user
1316 # support. Enabling this option will use one slot
1317 # of kernel per-thread data. You should ensure you
1318 # have enough slots configured for all your
1321 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1323 # No user value, uncomment the following line to provide one.
1325 # value_source default
1327 # Requires: CYGVAR_KERNEL_THREADS_DATA
1328 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1332 # Random number seed
1333 # This selects the initial random number seed for
1334 # rand()'s pseudo-random number generator. For
1335 # strict ISO standard compliance, this should be 1,
1336 # as per section 7.10.2.2 of the standard.
1338 cdl_option CYGNUM_LIBC_RAND_SEED {
1340 # No user value, uncomment the following line to provide one.
1342 # value_source default
1344 # Legal values: 0 to 0x7fffffff
1348 # Trace verbosity level for debugging the rand(),
1349 # srand() and rand_r() functions. Increase this
1350 # value to get additional trace output.
1352 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1354 # No user value, uncomment the following line to provide one.
1356 # value_source default
1358 # Legal values: 0 to 1
1361 # Simplest implementation
1362 # This provides a very simple implementation of rand()
1363 # that does not perform well with randomness in the
1364 # lower significant bits. However it is exceptionally
1365 # fast. It uses the sample algorithm from the ISO C
1368 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1370 # No user value, uncomment the following line to provide one.
1372 # value_source default
1376 # Simple implementation #1
1377 # This provides a very simple implementation of rand()
1378 # based on the simplest implementation above. However
1379 # it does try to work around the lack of randomness
1380 # in the lower significant bits, at the expense of a
1383 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1390 # Knuth implementation #1
1391 # This implements a slightly more complex algorithm
1392 # published in Donald E. Knuth's Art of Computer
1393 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1394 # This produces better random numbers than the
1395 # simplest approach but is slower.
1397 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1406 # This option allows use of the utility function
1407 # strtod() (and consequently atof()) to convert
1408 # from string to double precision floating point
1409 # numbers. Disabling this option removes the
1410 # dependency on the math library package.
1412 cdl_option CYGFUN_LIBC_strtod {
1414 # No user value, uncomment the following line to provide one.
1416 # value_source default
1417 # Default value: 0 != CYGPKG_LIBM
1418 # CYGPKG_LIBM (unknown) == 0
1420 # Requires: CYGPKG_LIBM
1421 # CYGPKG_LIBM (unknown) == 0
1425 # Provides long long conversion functions
1426 # Enabling this option will provide support for the strtoll(),
1427 # strtoull() and atoll() conversion functions, which are
1428 # the long long variants of the standard versions of these
1429 # functions. Supporting this requires extra code and compile
1432 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1439 # bsearch() tracing level
1440 # Trace verbosity level for debugging the <stdlib.h>
1441 # binary search function bsearch(). Increase this
1442 # value to get additional trace output.
1444 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1446 # No user value, uncomment the following line to provide one.
1448 # value_source default
1450 # Legal values: 0 to 1
1453 # qsort() tracing level
1454 # Trace verbosity level for debugging the <stdlib.h>
1455 # quicksort function qsort(). Increase this value
1456 # to get additional trace output.
1458 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1460 # No user value, uncomment the following line to provide one.
1462 # value_source default
1464 # Legal values: 0 to 1
1467 # C library stdlib build options
1468 # Package specific build options including control over
1469 # compiler flags used only in building this package,
1470 # and details of which tests are built.
1472 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1473 # There is no associated value.
1477 # Additional compiler flags
1478 # This option modifies the set of compiler flags for
1479 # building this package. These flags are used in addition
1480 # to the set of global flags.
1482 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1484 # No user value, uncomment the following line to provide one.
1485 # user_value "-fno-rtti -Woverloaded-virtual"
1486 # value_source default
1487 # Default value: "-fno-rtti -Woverloaded-virtual"
1490 # Suppressed compiler flags
1491 # This option modifies the set of compiler flags for
1492 # building this package. These flags are removed from
1493 # the set of global flags if present.
1495 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1497 # No user value, uncomment the following line to provide one.
1498 # user_value -Wno-pointer-sign
1499 # value_source default
1500 # Default value: -Wno-pointer-sign
1503 # C library stdlib tests
1504 # This option specifies the set of tests for this package.
1506 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1507 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1509 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1516 # doc: ref/the-ecos-hardware-abstraction-layer.html
1517 # The eCos HAL package provide a porting layer for
1518 # higher-level parts of the system such as the kernel and the
1519 # C library. Each installation should have HAL packages for
1520 # one or more architectures, and for each architecture there
1521 # may be one or more supported platforms. It is necessary to
1522 # select one target architecture and one platform for that
1523 # architecture. There are also a number of configuration
1524 # options that are common to all HAL packages.
1526 cdl_package CYGPKG_HAL {
1527 # Packages cannot be added or removed, nor can their version be changed,
1528 # simply by editing their value. Instead the appropriate configuration
1529 # should be used to perform these actions.
1531 # This value cannot be modified here.
1533 # Current value: 1 current
1534 # Requires: CYGPKG_INFRA
1535 # CYGPKG_INFRA == current
1538 # The following properties are affected by this value
1542 # Platform-independent HAL options
1543 # A number of configuration options are common to most or all
1544 # HAL packages, for example options controlling how much state
1545 # should be saved during a context switch. The implementations
1546 # of these options will vary from architecture to architecture.
1548 cdl_component CYGPKG_HAL_COMMON {
1549 # There is no associated value.
1553 # Provide eCos kernel support
1554 # The HAL can be configured to either support the full eCos
1555 # kernel, or to support only very simple applications which do
1556 # not require a full kernel. If kernel support is not required
1557 # then some of the startup, exception, and interrupt handling
1558 # code can be eliminated.
1560 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1562 # No user value, uncomment the following line to provide one.
1564 # value_source default
1565 # Default value: CYGPKG_KERNEL
1566 # CYGPKG_KERNEL (unknown) == 0
1568 # Requires: CYGPKG_KERNEL
1569 # CYGPKG_KERNEL (unknown) == 0
1573 # HAL exception support
1574 # When a processor exception occurs, for example an attempt to
1575 # execute an illegal instruction or to perform a divide by
1576 # zero, this exception may be handled in a number of different
1577 # ways. If the target system has gdb support then typically
1578 # the exception will be handled by gdb code. Otherwise if the
1579 # HAL exception support is enabled then the HAL will invoke a
1580 # routine deliver_exception(). Typically this routine will be
1581 # provided by the eCos kernel, but it is possible for
1582 # application code to provide its own implementation. If the
1583 # HAL exception support is not enabled and a processor
1584 # exception occurs then the behaviour of the system is
1587 cdl_option CYGPKG_HAL_EXCEPTIONS {
1589 # No user value, uncomment the following line to provide one.
1591 # value_source default
1592 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1593 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1595 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1596 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Stop calling constructors early
1601 # This option supports environments where some constructors
1602 # must be run in the context of a thread rather than at
1603 # simple system startup time. A boolean flag named
1604 # cyg_hal_stop_constructors is set to 1 when constructors
1605 # should no longer be invoked. It is up to some other
1606 # package to deal with the rest of the constructors.
1607 # In the current version this is only possible with the
1610 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1612 # No user value, uncomment the following line to provide one.
1614 # value_source default
1616 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1617 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1621 # HAL uses the MMU and allows for CDL manipulation of it's use
1623 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1624 # No options implement this inferface
1625 # This value cannot be modified here.
1629 # The following properties are affected by this value
1630 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1631 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1634 # Install MMU tables.
1635 # This option controls whether this application installs
1636 # its own Memory Management Unit (MMU) tables, or relies on the
1637 # existing environment to run.
1639 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1640 # This option is not active
1641 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1642 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1646 # No user value, uncomment the following line to provide one.
1648 # value_source default
1649 # Default value: CYG_HAL_STARTUP != "RAM"
1650 # CYG_HAL_STARTUP == ROMRAM
1653 # The following properties are affected by this value
1654 # option CYGSEM_HAL_STATIC_MMU_TABLES
1655 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1658 # Use static MMU tables.
1659 # This option defines an environment where any Memory
1660 # Management Unit (MMU) tables are constant. Normally used by ROM
1661 # based environments, this provides a way to save RAM usage which
1662 # would otherwise be required for these tables.
1664 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1666 # No user value, uncomment the following line to provide one.
1668 # value_source default
1670 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1671 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1675 # Route diagnostic output to debug channel
1676 # If not inheriting the console setup from the ROM monitor,
1677 # it is possible to redirect diagnostic output to the debug
1678 # channel by enabling this option. Depending on the debugger
1679 # used it may also be necessary to select a mangler for the
1680 # output to be displayed by the debugger.
1682 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1683 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1684 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1686 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1687 # CYGPKG_HAL_ARM == current
1688 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1689 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1690 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1694 # No user value, uncomment the following line to provide one.
1696 # value_source default
1697 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1698 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1699 # CYG_HAL_STARTUP == ROMRAM
1702 # The following properties are affected by this value
1703 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1704 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1708 # Mangler used on diag output
1709 # It is sometimes necessary to mangle (encode) the
1710 # diag ASCII text output in order for it to show up at the
1711 # other end. In particular, GDB may silently ignore raw
1714 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1715 # This option is not active
1716 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1719 # No user value, uncomment the following line to provide one.
1721 # value_source default
1722 # Default value: GDB
1723 # Legal values: "GDB" "None"
1728 # HAL interrupt handling
1729 # A number of configuration options related to interrupt
1730 # handling are common to most or all HAL packages, even though
1731 # the implementations will vary from architecture to
1734 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1735 # There is no associated value.
1739 # Use separate stack for interrupts
1740 # When an interrupt occurs this interrupt can be handled either
1741 # on the current stack or on a separate stack maintained by the
1742 # HAL. Using a separate stack requires a small number of extra
1743 # instructions in the interrupt handling code, but it has the
1744 # advantage that it is no longer necessary to allow extra space
1745 # in every thread stack for the interrupt handlers. The amount
1746 # of extra space required depends on the interrupt handlers
1747 # that are being used.
1749 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1751 # No user value, uncomment the following line to provide one.
1753 # The inferred value should not be edited directly.
1755 # value_source inferred
1758 # The following properties are affected by this value
1759 # package CYGPKG_REDBOOT
1760 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1763 # Interrupt stack size
1764 # This configuration option specifies the stack size in bytes
1765 # for the interrupt stack. Typically this should be a multiple
1766 # of 16, but the exact requirements will vary from architecture
1767 # to architecture. The interrupt stack serves two separate
1768 # purposes. It is used as the stack during system
1769 # initialization. In addition, if the interrupt system is
1770 # configured to use a separate stack then all interrupts will
1771 # be processed on this stack. The exact memory requirements
1772 # will vary from application to application, and will depend
1773 # heavily on whether or not other interrupt-related options,
1774 # for example nested interrupts, are enabled. On most targets,
1775 # in a configuration with no kernel this stack will also be
1776 # the stack used to invoke the application, and must obviously
1777 # be appropriately large in that case.
1779 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1781 # No user value, uncomment the following line to provide one.
1783 # value_source default
1784 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1785 # CYGPKG_KERNEL (unknown) == 0
1787 # Legal values: 128 to 1048576
1790 # Allow nested interrupts
1791 # When an interrupt occurs the HAL interrupt handling code can
1792 # either leave interrupts disabled for the duration of the
1793 # interrupt handling code, or by doing some extra work it can
1794 # reenable interrupts before invoking the interrupt handler and
1795 # thus allow nested interrupts to happen. If all the interrupt
1796 # handlers being used are small and do not involve any loops
1797 # then it is usually better to disallow nested interrupts.
1798 # However if any of the interrupt handlers are more complicated
1799 # than nested interrupts will usually be required.
1801 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1803 # No user value, uncomment the following line to provide one.
1805 # value_source default
1809 # Save minimum context on interrupt
1810 # The HAL interrupt handling code can exploit the calling conventions
1811 # defined for a given architecture to reduce the amount of state
1812 # that has to be saved. Generally this improves performance and
1813 # reduces code size. However it can make source-level debugging
1816 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1818 # No user value, uncomment the following line to provide one.
1820 # The inferred value should not be edited directly.
1822 # value_source inferred
1825 # The following properties are affected by this value
1826 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1827 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1828 # component CYGBLD_BUILD_REDBOOT
1829 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1832 # Chain all interrupts together
1833 # Interrupts can be attached to vectors either singly, or be
1834 # chained together. The latter is necessary if there is no way
1835 # of discovering which device has interrupted without
1836 # inspecting the device itself. It can also reduce the amount
1837 # of RAM needed for interrupt decoding tables and code.
1839 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1841 # No user value, uncomment the following line to provide one.
1843 # value_source default
1847 # Ignore spurious [fleeting] interrupts
1848 # On some hardware, interrupt sources may not be de-bounced or
1849 # de-glitched. Rather than try to handle these interrupts (no
1850 # handling may be possible), this option allows the HAL to simply
1851 # ignore them. In most cases, if the interrupt is real it will
1852 # reoccur in a detectable form.
1854 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1856 # No user value, uncomment the following line to provide one.
1858 # value_source default
1863 # HAL context switch support
1864 # A number of configuration options related to thread contexts
1865 # are common to most or all HAL packages, even though the
1866 # implementations will vary from architecture to architecture.
1868 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1869 # There is no associated value.
1871 # The following properties are affected by this value
1875 # Use minimum thread context
1876 # The thread context switch code can exploit the calling
1877 # conventions defined for a given architecture to reduce the
1878 # amount of state that has to be saved during a context
1879 # switch. Generally this improves performance and reduces
1880 # code size. However it can make source-level debugging more
1883 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1885 # No user value, uncomment the following line to provide one.
1887 # The inferred value should not be edited directly.
1889 # value_source inferred
1892 # The following properties are affected by this value
1893 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1894 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1895 # component CYGBLD_BUILD_REDBOOT
1896 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # Explicit control over cache behaviour
1901 # These options let the default behaviour of the caches
1902 # be easily configurable.
1904 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1905 # There is no associated value.
1909 # Enable DATA cache on startup
1910 # Enabling this option will cause the data cache to be enabled
1911 # as soon as practicable when eCos starts up. One would choose
1912 # to disable this if the data cache cannot safely be turned on,
1913 # such as a case where the cache(s) require additional platform
1916 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1918 # No user value, uncomment the following line to provide one.
1920 # value_source default
1925 # DATA cache mode on startup
1926 # This option controls the mode the cache will be set to
1927 # when enabled on startup.
1929 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1931 # No user value, uncomment the following line to provide one.
1932 # user_value COPYBACK
1933 # value_source default
1934 # Default value: COPYBACK
1935 # Legal values: "COPYBACK" "WRITETHRU"
1939 # Enable INSTRUCTION cache on startup
1940 # Enabling this option will cause the instruction cache to be enabled
1941 # as soon as practicable when eCos starts up. One would choose
1942 # to disable this if the instruction cache cannot safely be turned on,
1943 # such as a case where the cache(s) require additional platform
1946 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1948 # No user value, uncomment the following line to provide one.
1950 # value_source default
1955 # Source-level debugging support
1956 # If the source level debugger gdb is to be used for debugging
1957 # application code then it may be necessary to configure in support
1958 # for this in the HAL.
1960 cdl_component CYGPKG_HAL_DEBUG {
1961 # There is no associated value.
1965 # Support for GDB stubs
1966 # The HAL implements GDB stubs for the target.
1968 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1969 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
1970 # This value cannot be modified here.
1974 # The following properties are affected by this value
1975 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1976 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1977 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1978 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1981 # Include GDB stubs in HAL
1982 # This option causes a set of GDB stubs to be included into the
1983 # system. On some target systems the GDB support will be
1984 # provided by other means, for example by a ROM monitor. On
1985 # other targets, especially when building a ROM-booting system,
1986 # the necessary support has to go into the target library
1987 # itself. When GDB stubs are include in a configuration, HAL
1988 # serial drivers must also be included.
1990 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1991 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1992 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
1996 # No user value, uncomment the following line to provide one.
1998 # The inferred value should not be edited directly.
2000 # value_source inferred
2002 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2003 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2005 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2006 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2008 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2009 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2011 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2012 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2013 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2016 # The following properties are affected by this value
2017 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2018 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2019 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2021 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2022 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2023 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2024 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2025 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2026 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2027 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2028 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2029 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2030 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2031 # option CYGPKG_HAL_GDB_FILEIO
2032 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2033 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2034 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2035 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2036 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2037 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2038 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2041 # Support for external break support in GDB stubs
2042 # The HAL implements external break (or asynchronous interrupt)
2043 # in the GDB stubs for the target.
2045 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2046 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2047 # This value cannot be modified here.
2051 # The following properties are affected by this value
2052 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2053 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2056 # Include GDB external break support for stubs
2057 # This option causes the GDB stub to add a serial interrupt handler
2058 # which will listen for GDB break packets. This lets you stop the
2059 # target asynchronously when using GDB, usually by hitting Control+C
2060 # or pressing the STOP button. This option differs from
2061 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2062 # GDB stubs are present.
2064 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2065 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2066 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2070 # No user value, uncomment the following line to provide one.
2072 # value_source default
2073 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2074 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2076 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2077 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2080 # The following properties are affected by this value
2081 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2082 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2083 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2084 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2085 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2086 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2089 # Platform does not support CTRLC
2091 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2092 # No options implement this inferface
2093 # This value cannot be modified here.
2097 # The following properties are affected by this value
2098 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2099 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2102 # Include GDB external break support when no stubs
2103 # This option adds an interrupt handler for the GDB serial line
2104 # which will listen for GDB break packets. This lets you stop the
2105 # target asynchronously when using GDB, usually by hitting Control+C
2106 # or pressing the STOP button. This option differs from
2107 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2108 # stubs are NOT present.
2110 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2111 # This option is not active
2112 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2113 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2114 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2116 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2117 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2121 # No user value, uncomment the following line to provide one.
2123 # value_source default
2124 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2125 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2127 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2128 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2131 # The following properties are affected by this value
2132 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2133 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2134 # component CYGBLD_BUILD_REDBOOT
2135 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2138 # Include GDB multi-threading debug support
2139 # This option enables some extra HAL code which is needed
2140 # to support multi-threaded source level debugging.
2142 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2143 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2144 # CYGSEM_HAL_ROM_MONITOR == 1
2145 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2149 # No user value, uncomment the following line to provide one.
2151 # value_source default
2154 # The following properties are affected by this value
2155 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2156 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2157 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2158 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2161 # Number of times to retry sending a $O packet
2162 # This option controls the number of attempts that eCos programs
2163 # will make to send a $O packet to a host GDB process. If it is
2164 # set non-zero, then the target process will attempt to resend the
2165 # $O packet data up to this number of retries. Caution: use of
2166 # this option is not recommended as it can thoroughly confuse the
2169 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2171 # No user value, uncomment the following line to provide one.
2173 # value_source default
2177 # Timeout period for GDB packets
2178 # This option controls the time (in milliseconds) that eCos programs
2179 # will wait for a response when sending packets to a host GDB process.
2180 # If this time elapses, then the packet will be resent, up to some
2181 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2183 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2185 # No user value, uncomment the following line to provide one.
2187 # value_source default
2188 # Default value: 500
2191 # Location of CRC32 table
2192 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2193 # and placed in ROM, or generated at runtime in RAM. Depending on
2194 # your memory constraints, one of these options may be better.
2196 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2198 # No user value, uncomment the following line to provide one.
2200 # value_source default
2201 # Default value: RAM
2202 # Legal values: "ROM" "RAM"
2206 # ROM monitor support
2207 # Support for ROM monitors can be built in to your application.
2208 # It may also be relevant to build your application as a ROM monitor
2209 # itself. Such options are contained here if relevant for your chosen
2210 # platform. The options and ROM monitors available to choose are
2211 # platform-dependent.
2213 cdl_component CYGPKG_HAL_ROM_MONITOR {
2214 # There is no associated value.
2216 # The following properties are affected by this value
2220 # Target has virtual vector support
2222 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2223 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
2224 # This value cannot be modified here.
2228 # The following properties are affected by this value
2229 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2230 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2233 # Target supports baud rate control via vectors
2234 # Whether this target supports the __COMMCTL_GETBAUD
2235 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2237 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2238 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2239 # This value cannot be modified here.
2243 # The following properties are affected by this value
2244 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2245 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2248 # Enable use of virtual vector calling interface
2249 # Virtual vector support allows the HAL to let the ROM
2250 # monitor handle certain operations. The virtual vector table
2251 # defines a calling interface between applications running in
2252 # RAM and the ROM monitor.
2254 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2255 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2256 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2259 # Calculated value: 1
2263 # The following properties are affected by this value
2264 # component CYGBLD_BUILD_REDBOOT
2265 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2266 # package CYGPKG_DEVS_ETH_PHY
2267 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # Inherit console settings from ROM monitor
2272 # When this option is set, the application will inherit
2273 # the console as set up by the ROM monitor. This means
2274 # that the application will use whatever channel and
2275 # mangling style was used by the ROM monitor when
2276 # the application was launched.
2278 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2279 # This option is not active
2280 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2281 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2285 # No user value, uncomment the following line to provide one.
2287 # value_source default
2288 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2289 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2292 # The following properties are affected by this value
2293 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2294 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2295 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2296 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # Debug channel is configurable
2300 # This option is a configuration hint - it is enabled
2301 # when the HAL initialization code will make use
2302 # of the debug channel configuration option.
2304 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2305 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2306 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2310 # The following properties are affected by this value
2311 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2312 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2315 # Console channel is configurable
2316 # This option is a configuration hint - it is enabled
2317 # when the HAL initialization code will make use
2318 # of the console channel configuration option.
2320 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2321 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2322 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2323 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2327 # The following properties are affected by this value
2328 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2329 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2332 # Initialize whole of virtual vector table
2333 # This option will cause the whole of the virtual
2334 # vector table to be initialized with dummy values on
2335 # startup. When this option is enabled, all the
2336 # options below must also be enabled - or the
2337 # table would be empty when the application
2339 # On targets where older ROM monitors without
2340 # virtual vector support may still be in use, it is
2341 # necessary for RAM applictions to initialize the
2342 # table (since all HAL diagnostics and debug IO
2343 # happens via the table).
2345 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2347 # No user value, uncomment the following line to provide one.
2349 # value_source default
2350 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2351 # CYG_HAL_STARTUP == ROMRAM
2352 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2354 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2355 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2357 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2358 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2360 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2361 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2363 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2364 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2366 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2367 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2370 # The following properties are affected by this value
2371 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2372 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2373 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2374 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2375 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2376 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2377 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2378 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2379 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2380 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2381 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2382 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2383 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2384 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2387 # Claim virtual vector table entries by default
2388 # By default most virtual vectors will be claimed by
2389 # RAM startup configurations, meaning that the RAM
2390 # application will provide the services. The
2391 # exception is COMMS support (HAL
2392 # diagnostics/debugging IO) which is left in the
2393 # control of the ROM monitor.
2394 # The reasoning behind this is to get as much of the
2395 # code exercised during regular development so it
2396 # is known to be working the few times a new ROM
2397 # monitor or a ROM production configuration is used
2398 # - COMMS are excluded only by necessity in order to
2399 # avoid breaking an existing debugger connections
2400 # (there may be ways around this).
2401 # For production RAM configurations this option can
2402 # be switched off, causing the appliction to rely on
2403 # the ROM monitor for these services, thus
2404 # saving some space.
2405 # Individual vectors may also be left unclaimed,
2406 # controlled by the below options (meaning that the
2407 # associated service provided by the ROM monitor
2410 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2411 # This option is not active
2412 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2413 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2417 # No user value, uncomment the following line to provide one.
2419 # value_source default
2422 # The following properties are affected by this value
2423 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2424 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2425 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2426 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2427 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2428 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2429 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2430 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2433 # Claim reset virtual vectors
2434 # This option will cause the reset and kill_by_reset
2435 # virtual vectors to be claimed.
2437 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2439 # No user value, uncomment the following line to provide one.
2441 # value_source default
2442 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2443 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2444 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2447 # The following properties are affected by this value
2448 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2449 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2452 # Claim version virtual vectors
2453 # This option will cause the version
2454 # virtual vectors to be claimed.
2456 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2458 # No user value, uncomment the following line to provide one.
2460 # value_source default
2461 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2462 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2466 # Claim delay_us virtual vector
2467 # This option will cause the delay_us
2468 # virtual vector to be claimed.
2470 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2472 # No user value, uncomment the following line to provide one.
2474 # value_source default
2475 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2476 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2477 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2480 # The following properties are affected by this value
2481 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2482 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2485 # Claim cache virtual vectors
2486 # This option will cause the cache virtual vectors
2489 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2491 # No user value, uncomment the following line to provide one.
2493 # value_source default
2494 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2495 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2496 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2499 # The following properties are affected by this value
2500 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2501 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2504 # Claim data virtual vectors
2505 # This option will cause the data virtual vectors
2506 # to be claimed. At present there is only one, used
2507 # by the RedBoot ethernet driver to share diag output.
2509 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2511 # No user value, uncomment the following line to provide one.
2513 # value_source default
2514 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2515 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2516 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2519 # The following properties are affected by this value
2520 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2521 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2524 # Claim comms virtual vectors
2525 # This option will cause the communication tables
2526 # that are part of the virtual vectors mechanism to
2527 # be claimed. Note that doing this may cause an
2528 # existing ROM monitor communication connection to
2529 # be closed. For this reason, the option is disabled
2530 # per default for normal application
2533 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2535 # No user value, uncomment the following line to provide one.
2537 # value_source default
2538 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2539 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2540 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2543 # The following properties are affected by this value
2544 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2545 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2546 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2547 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2548 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2549 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2550 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2551 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2554 # Do diagnostic IO via virtual vector table
2555 # All HAL IO happens via the virtual vector table / comm
2556 # tables when those tables are supported by the HAL.
2557 # If so desired, the low-level IO functions can
2558 # still be provided by the RAM application by
2559 # enabling the CLAIM_COMMS option.
2561 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2562 # Calculated value: 1
2566 # The following properties are affected by this value
2567 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2568 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2569 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2570 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2574 # Behave as a ROM monitor
2575 # Enable this option if this program is to be used as a ROM monitor,
2576 # i.e. applications will be loaded into RAM on the TX51 module, and this
2577 # ROM monitor may process exceptions or interrupts generated from the
2578 # application. This enables features such as utilizing a separate
2579 # interrupt stack when exceptions are generated.
2581 cdl_option CYGSEM_HAL_ROM_MONITOR {
2583 # No user value, uncomment the following line to provide one.
2585 # The inferred value should not be edited directly.
2587 # value_source inferred
2589 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2590 # CYG_HAL_STARTUP == ROMRAM
2591 # CYG_HAL_STARTUP == ROMRAM
2594 # The following properties are affected by this value
2595 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2596 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2597 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2598 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2599 # option CYGPRI_REDBOOT_ROM_MONITOR
2600 # Requires: CYGSEM_HAL_ROM_MONITOR
2603 # Work with a ROM monitor
2604 # Support can be enabled for different varieties of ROM monitor.
2605 # This support changes various eCos semantics such as the encoding
2606 # of diagnostic output, or the overriding of hardware interrupt
2608 # Firstly there is "Generic" support which prevents the HAL
2609 # from overriding the hardware vectors that it does not use, to
2610 # instead allow an installed ROM monitor to handle them. This is
2611 # the most basic support which is likely to be common to most
2612 # implementations of ROM monitor.
2613 # "GDB_stubs" provides support when GDB stubs are included in
2614 # the ROM monitor or boot ROM.
2616 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2618 # No user value, uncomment the following line to provide one.
2620 # value_source default
2621 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2622 # CYG_HAL_STARTUP == ROMRAM
2624 # Legal values: "Generic" "GDB_stubs"
2625 # Requires: CYG_HAL_STARTUP == "RAM"
2626 # CYG_HAL_STARTUP == ROMRAM
2629 # The following properties are affected by this value
2630 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2631 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2632 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2633 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2634 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2635 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2636 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2637 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2641 # Platform defined I/O channels.
2642 # Platforms which provide additional I/O channels can implement
2643 # this interface, indicating that the function plf_if_init()
2644 # needs to be called.
2646 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2647 # No options implement this inferface
2648 # This value cannot be modified here.
2653 # Platform IDE I/O support.
2654 # Platforms which provide IDE controllers can implement
2655 # this interface, indicating that IDE I/O macros are
2658 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2659 # No options implement this inferface
2660 # This value cannot be modified here.
2664 # The following properties are affected by this value
2665 # component CYGSEM_REDBOOT_DISK_IDE
2666 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2669 # File I/O operations via GDB
2670 # This option enables support for various file I/O
2671 # operations using the GDB remote protocol to communicate
2672 # with GDB. The operations are then performed on the
2673 # debugging host by proxy. These operations are only
2674 # currently available by using a system call interface
2675 # to RedBoot. This may change in the future.
2677 cdl_option CYGPKG_HAL_GDB_FILEIO {
2678 # This option is not active
2679 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2680 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2684 # No user value, uncomment the following line to provide one.
2686 # value_source default
2688 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2689 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2693 # Build Compiler sanity checking tests
2694 # Enabling this option causes compiler tests to be built.
2696 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2698 # No user value, uncomment the following line to provide one.
2700 # value_source default
2703 # The following properties are affected by this value
2704 # component CYGPKG_HAL_TESTS
2705 # Calculated: "tests/context tests/basic"
2706 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2707 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2708 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2712 # This option specifies the set of tests for the common HAL.
2714 cdl_component CYGPKG_HAL_TESTS {
2715 # Calculated value: "tests/context tests/basic"
2716 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2717 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2718 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2719 # CYGINT_HAL_TESTS_NO_CACHES == 0
2720 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2721 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2723 # Current_value: tests/context tests/basic tests/cache tests/intr
2727 # Interface for cache presence
2728 # Some architectures and/or platforms do not have caches. By
2729 # implementing this interface, these can disable the various
2730 # cache-related tests.
2732 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2733 # No options implement this inferface
2734 # This value cannot be modified here.
2736 # Current value: 0 0
2738 # The following properties are affected by this value
2739 # component CYGPKG_HAL_TESTS
2740 # Calculated: "tests/context tests/basic"
2741 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2742 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2743 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2748 # The ARM architecture HAL package provides generic
2749 # support for this processor architecture. It is also
2750 # necessary to select a specific target platform HAL
2753 cdl_package CYGPKG_HAL_ARM {
2754 # Packages cannot be added or removed, nor can their version be changed,
2755 # simply by editing their value. Instead the appropriate configuration
2756 # should be used to perform these actions.
2758 # This value cannot be modified here.
2760 # Current value: 1 current
2762 # The following properties are affected by this value
2763 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2764 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2765 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2766 # ActiveIf: CYGPKG_HAL_ARM
2770 # The CPU architecture supports THUMB mode
2772 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2773 # No options implement this inferface
2774 # This value cannot be modified here.
2778 # The following properties are affected by this value
2779 # option CYGHWR_THUMB
2780 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2781 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2782 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2785 # Enable Thumb instruction set
2786 # Enable use of the Thumb instruction set.
2788 cdl_option CYGHWR_THUMB {
2789 # This option is not active
2790 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2791 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2795 # No user value, uncomment the following line to provide one.
2797 # value_source default
2800 # The following properties are affected by this value
2801 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2802 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2805 # Enable Thumb interworking compiler option
2806 # This option controls the use of -mthumb-interwork in the
2807 # compiler flags. It defaults enabled in Thumb or ROM monitor
2808 # configurations, but can be overridden for reduced memory
2809 # footprint where interworking is not a requirement.
2811 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2812 # This option is not active
2813 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2814 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2818 # No user value, uncomment the following line to provide one.
2820 # value_source default
2821 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2823 # CYGSEM_HAL_ROM_MONITOR == 1
2827 # The platform and architecture supports Big Endian operation
2829 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2830 # No options implement this inferface
2831 # This value cannot be modified here.
2835 # The following properties are affected by this value
2836 # option CYGHWR_HAL_ARM_BIGENDIAN
2837 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2840 # Use big-endian mode
2841 # Use the CPU in big-endian mode.
2843 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2844 # This option is not active
2845 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2846 # CYGINT_HAL_ARM_BIGENDIAN == 0
2850 # No user value, uncomment the following line to provide one.
2852 # value_source default
2856 # The platform uses a processor with an ARM7 core
2858 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2859 # No options implement this inferface
2860 # This value cannot be modified here.
2864 # The following properties are affected by this value
2865 # option CYGHWR_HAL_ARM_CPU_FAMILY
2866 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2867 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2868 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2869 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2871 # option CYGHWR_HAL_ARM_CPU_FAMILY
2872 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2873 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2874 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2875 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2879 # The platform uses a processor with an ARM9 core
2881 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2882 # Implemented by CYGPKG_HAL_ARM_MX51, active, enabled
2883 # This value cannot be modified here.
2887 # The following properties are affected by this value
2888 # option CYGHWR_HAL_ARM_CPU_FAMILY
2889 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2890 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2891 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2892 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2894 # option CYGHWR_HAL_ARM_CPU_FAMILY
2895 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2896 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2897 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2898 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2902 # The platform uses a processor with a StrongARM core
2904 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2905 # No options implement this inferface
2906 # This value cannot be modified here.
2910 # The following properties are affected by this value
2911 # option CYGHWR_HAL_ARM_CPU_FAMILY
2912 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2913 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2914 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2915 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2917 # option CYGHWR_HAL_ARM_CPU_FAMILY
2918 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2919 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2920 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2921 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2925 # The platform uses a processor with a XScale core
2927 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2928 # No options implement this inferface
2929 # This value cannot be modified here.
2933 # The following properties are affected by this value
2934 # option CYGHWR_HAL_ARM_CPU_FAMILY
2935 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2936 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2937 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2938 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2940 # option CYGHWR_HAL_ARM_CPU_FAMILY
2941 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2942 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2943 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2944 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2949 # It is possible to optimize code for different
2950 # ARM CPU families. This option selects which CPU to
2951 # optimize for on boards that support multiple CPU types.
2953 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2955 # No user value, uncomment the following line to provide one.
2957 # value_source default
2958 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2959 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2960 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2961 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2963 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2964 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2965 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2966 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2968 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2969 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2970 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2971 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2973 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2974 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2975 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2976 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2979 # Provide diagnostic dump for exceptions
2980 # Print messages about hardware exceptions, including
2981 # raw exception frame dump and register contents.
2983 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
2985 # No user value, uncomment the following line to provide one.
2987 # value_source default
2989 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2990 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2994 # Process all exceptions with the eCos application
2995 # Normal RAM-based programs which do not include GDB stubs
2996 # defer processing of the illegal instruction exception to GDB.
2997 # Setting this options allows the program to explicitly handle
2998 # the illegal instruction exception itself. Note: this will
2999 # prevent the use of GDB to debug the application as breakpoints
3000 # will no longer work.
3002 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3004 # No user value, uncomment the following line to provide one.
3006 # value_source default
3010 # Support GDB thread operations via ICE/Multi-ICE
3011 # Allow GDB to get thread information via the ICE/Multi-ICE
3014 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3016 # No user value, uncomment the following line to provide one.
3018 # value_source default
3020 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3021 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3023 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3024 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3026 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3027 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3031 # Support for 'gprof' callbacks
3032 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3033 # to acquire the interrupt-context PC and SP, when this option is
3036 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3037 # This option is not active
3038 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3039 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3041 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3042 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3043 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3046 # Calculated value: 1
3051 # Accept exceptions and irq's occurring in user mode
3052 # For standalone Redboot based programs running in user mode.
3054 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3056 # No user value, uncomment the following line to provide one.
3058 # value_source default
3062 # Preserve svc spsr before returning to svc mode
3063 # This option secures exception and breakpoint processing
3064 # triggered during execution of application specific SWI
3067 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3069 # No user value, uncomment the following line to provide one.
3071 # value_source default
3077 cdl_option CYGBLD_LINKER_SCRIPT {
3078 # Calculated value: "src/arm.ld"
3080 # Current_value: src/arm.ld
3083 # Implementations of hal_arm_mem_real_region_top()
3085 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3086 # No options implement this inferface
3087 # This value cannot be modified here.
3092 # Freescale SoC architecture
3093 # This HAL variant package provides generic
3094 # support for the Freescale SoC. It is also
3095 # necessary to select a specific target platform HAL
3098 cdl_package CYGPKG_HAL_ARM_MX51 {
3099 # Packages cannot be added or removed, nor can their version be changed,
3100 # simply by editing their value. Instead the appropriate configuration
3101 # should be used to perform these actions.
3103 # This value cannot be modified here.
3105 # Current value: 1 current
3107 # The following properties are affected by this value
3108 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3109 # ActiveIf: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
3113 # MX51 Tapeout 2.0 support
3114 # When this option is enabled, it indicates support for
3117 cdl_option CYGHWR_MX51_TO2 {
3119 # No user value, uncomment the following line to provide one.
3121 # value_source default
3125 # MX51 mDDR memory support
3126 # When this option is enabled, it indicates support for
3127 # mDDR memory on MX51
3129 cdl_option CYGHWR_MX51_MDDR {
3136 # Processor clock rate
3137 # The processor can run at various frequencies.
3138 # These values are expressed in KHz. Note that there are
3139 # several steppings of the rate to run at different
3140 # maximum frequencies. Check the specs to make sure that your
3141 # particular processor can run at the rate you select here.
3143 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3144 # This option is not active
3145 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3146 # CYG_HAL_STARTUP == ROMRAM
3150 # No user value, uncomment the following line to provide one.
3152 # value_source default
3153 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3154 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3155 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3156 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3158 # Legal values: 150000 200000
3161 # Real-time clock constants
3163 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3164 # There is no associated value.
3168 # Real-time clock numerator
3170 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3171 # Calculated value: 1000000000
3173 # Current_value: 1000000000
3176 # Real-time clock denominator
3177 # This option selects the heartbeat rate for the real-time clock.
3178 # The rate is specified in ticks per second. Change this value
3179 # with caution - too high and your system will become saturated
3180 # just handling clock interrupts, too low and some operations
3181 # such as thread scheduling may become sluggish.
3183 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3185 # No user value, uncomment the following line to provide one.
3187 # value_source default
3188 # Default value: 100
3190 # The following properties are affected by this value
3191 # option CYGNUM_HAL_RTC_PERIOD
3192 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3195 # Real-time clock period
3197 cdl_option CYGNUM_HAL_RTC_PERIOD {
3198 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3199 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3201 # Current_value: 36864
3205 # UART1 available as diagnostic/debug channel
3206 # The chip has multiple serial channels which may be
3207 # used for different things on different platforms. This
3208 # interface allows a platform to indicate that the specified
3209 # serial port can be used as a diagnostic and/or debug channel.
3211 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3212 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3213 # This value cannot be modified here.
3217 # The following properties are affected by this value
3220 # UART2 available as diagnostic/debug channel
3221 # The chip has multiple serial channels which may be
3222 # used for different things on different platforms. This
3223 # interface allows a platform to indicate that the specified
3224 # serial port can be used as a diagnostic and/or debug channel.
3226 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3227 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3228 # This value cannot be modified here.
3232 # The following properties are affected by this value
3235 # UART3 available as diagnostic/debug channel
3236 # The chip has multiple serial channels which may be
3237 # used for different things on different platforms. This
3238 # interface allows a platform to indicate that the specified
3239 # serial port can be used as a diagnostic and/or debug channel.
3241 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3242 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3243 # This value cannot be modified here.
3247 # The following properties are affected by this value
3250 # UART4 available as diagnostic/debug channel
3251 # The chip has multiple serial channels which may be
3252 # used for different things on different platforms. This
3253 # interface allows a platform to indicate that the specified
3254 # serial port can be used as a diagnostic and/or debug channel.
3256 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3257 # Implemented by CYGPKG_HAL_ARM_TX51KARO, active, enabled
3258 # This value cannot be modified here.
3262 # The following properties are affected by this value
3265 # UART5 available as diagnostic/debug channel
3266 # The chip has multiple serial channels which may be
3267 # used for different things on different platforms. This
3268 # interface allows a platform to indicate that the specified
3269 # serial port can be used as a diagnostic and/or debug channel.
3271 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3272 # No options implement this inferface
3273 # This value cannot be modified here.
3279 # This HAL platform package provides generic
3280 # support for the Ka-Ro electronics TX51 module.
3282 cdl_package CYGPKG_HAL_ARM_TX51KARO {
3283 # Packages cannot be added or removed, nor can their version be changed,
3284 # simply by editing their value. Instead the appropriate configuration
3285 # should be used to perform these actions.
3287 # This value cannot be modified here.
3289 # Current value: 1 current
3290 # Requires: CYGINT_ISO_CTYPE
3291 # CYGINT_ISO_CTYPE == 1
3293 # Requires: CYGBLD_BUILD_REDBOOT == 1
3294 # CYGBLD_BUILD_REDBOOT == 1
3300 # The only startup type allowed is ROMRAM, since this will allow
3301 # the program to exist in ROM, but be copied to RAM during startup
3302 # which is required to boot from NAND flash.
3304 cdl_component CYG_HAL_STARTUP {
3306 # No user value, uncomment the following line to provide one.
3308 # value_source default
3309 # Default value: ROMRAM
3310 # Legal values: "ROMRAM"
3312 # The following properties are affected by this value
3313 # option CYGSEM_HAL_ROM_MONITOR
3314 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3315 # option CYGSEM_HAL_ROM_MONITOR
3316 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3317 # option CYGSEM_HAL_USE_ROM_MONITOR
3318 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3319 # option CYGSEM_HAL_USE_ROM_MONITOR
3320 # Requires: CYG_HAL_STARTUP == "RAM"
3321 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3322 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3323 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3324 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3325 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3326 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3327 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3328 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3329 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3330 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3331 # option CYGPRI_REDBOOT_ROM_MONITOR
3332 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3333 # option CYGPRI_REDBOOT_ROM_MONITOR
3334 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3337 # Diagnostic serial port baud rate
3338 # This option selects the baud rate used for the console port.
3339 # Note: this should match the value chosen for the GDB port if the
3340 # console and GDB port are the same.
3342 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3344 # No user value, uncomment the following line to provide one.
3346 # value_source default
3347 # Default value: 115200
3348 # Legal values: 9600 19200 38400 57600 115200
3351 # GDB serial port baud rate
3352 # This option selects the baud rate used for the GDB port.
3353 # Note: this should match the value chosen for the console port if the
3354 # console and GDB port are the same.
3356 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3358 # No user value, uncomment the following line to provide one.
3360 # value_source default
3361 # Default value: 115200
3362 # Legal values: 9600 19200 38400 57600 115200
3365 # Number of communication channels on the TX51
3367 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3368 # Calculated value: 3
3372 # The following properties are affected by this value
3373 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3374 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3375 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3376 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3377 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3378 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3382 # The TX51 provides access to three serial ports. This option
3383 # chooses which port will be used to connect to a host
3386 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3387 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3388 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3392 # No user value, uncomment the following line to provide one.
3394 # value_source default
3396 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3397 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3400 # Default console channel.
3402 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3403 # Calculated value: 0
3406 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3407 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3409 # The following properties are affected by this value
3410 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3411 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3414 # Console serial port
3415 # The TX51 provides access to three serial ports. This option
3416 # chooses which port will be used for console output.
3418 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3419 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3420 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3424 # No user value, uncomment the following line to provide one.
3426 # value_source default
3427 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3428 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3430 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3431 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 3
3434 # Ka-Ro electronics TX51 module build options
3435 # Package specific build options including control over
3436 # compiler flags used only in building this package,
3437 # and details of which tests are built.
3439 cdl_component CYGPKG_HAL_ARM_TX51_OPTIONS {
3440 # There is no associated value.
3441 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3442 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3448 # This option specifies the SDRAM size of the TX51 module.
3450 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_SIZE {
3452 # No user value, uncomment the following line to provide one.
3453 # user_value 0x08000000
3454 # value_source default
3455 # Default value: 0x08000000
3456 # Legal values: 0x10000000 0x08000000 0x04000000
3460 # This option specifies the SDRAM clock im MHz of the TX51 module.
3462 cdl_option CYGNUM_HAL_ARM_TX51_SDRAM_CLK {
3464 # No user value, uncomment the following line to provide one.
3466 # value_source default
3467 # Default value: 166
3468 # Legal values: 166 200
3471 # Enable low level debugging with LED
3472 # This option enables low level debugging by blink codes
3473 # of the LED on STK5.
3475 cdl_option CYGOPT_HAL_ARM_TX51_DEBUG {
3477 # No user value, uncomment the following line to provide one.
3479 # value_source default
3480 # Default value: false
3481 # false (unknown) == 0
3485 # Additional compiler flags
3486 # This option modifies the set of compiler flags for
3487 # building the TX51 HAL. These flags are used in addition
3488 # to the set of global flags.
3490 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_ADD {
3492 # No user value, uncomment the following line to provide one.
3494 # value_source default
3498 # Suppressed compiler flags
3499 # This option modifies the set of compiler flags for
3500 # building the TX51 HAL. These flags are removed from
3501 # the set of global flags if present.
3503 cdl_option CYGPKG_HAL_ARM_TX51_CFLAGS_REMOVE {
3505 # No user value, uncomment the following line to provide one.
3507 # value_source default
3511 # Show a splash screen from the FIS partition: 'logo'
3512 # When this option is enabled, RedBoot will look for a flash partition
3513 # named 'logo' and display the contents of this partition as initial
3516 cdl_option CYGHWR_MX51_LCD_LOGO {
3517 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3518 # CYGPKG_DEVS_IMX_IPU == current
3522 # No user value, uncomment the following line to provide one.
3524 # value_source default
3531 cdl_component CYGHWR_MEMORY_LAYOUT {
3532 # Calculated value: "arm_tx51_romram"
3534 # Current_value: arm_tx51_romram
3538 # Memory layout linker script fragment
3540 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3541 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.ldi>"
3543 # Current_value: <pkgconf/mlt_arm_tx51_romram.ldi>
3546 # Memory layout header file
3548 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3549 # Calculated value: "<pkgconf/mlt_arm_tx51_romram.h>"
3551 # Current_value: <pkgconf/mlt_arm_tx51_romram.h>
3560 # Common types and useful macros.
3561 # Tracing and assertion facilities.
3562 # Package startup options.
3564 cdl_package CYGPKG_INFRA {
3565 # Packages cannot be added or removed, nor can their version be changed,
3566 # simply by editing their value. Instead the appropriate configuration
3567 # should be used to perform these actions.
3569 # This value cannot be modified here.
3571 # Current value: 1 current
3573 # The following properties are affected by this value
3574 # package CYGPKG_HAL
3575 # Requires: CYGPKG_INFRA
3576 # component CYGBLD_BUILD_REDBOOT
3577 # Requires: CYGPKG_INFRA
3582 # The eCos source code contains a significant amount of
3583 # internal debugging support, in the form of assertions and
3585 # Assertions check at runtime that various conditions are as
3586 # expected; if not, execution is halted.
3587 # Tracing takes the form of text messages that are output
3588 # whenever certain events occur, or whenever functions are
3590 # The most important property of these checks and messages is
3591 # that they are not required for the program to run.
3592 # It is prudent to develop software with assertions enabled,
3593 # but disable them when making a product release, thus
3594 # removing the overhead of that checking.
3595 # It is possible to enable assertions and tracing
3597 # There are also options controlling the exact behaviour of
3598 # the assertion and tracing facilities, thus giving users
3599 # finer control over the code and data size requirements.
3601 cdl_component CYGPKG_INFRA_DEBUG {
3603 # No user value, uncomment the following line to provide one.
3605 # value_source default
3608 # The following properties are affected by this value
3609 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3610 # ActiveIf: CYGPKG_INFRA_DEBUG
3615 # If this option is defined, asserts in the code are tested.
3616 # Assert functions (CYG_ASSERT()) are defined in
3617 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3618 # If it is not defined, these result in no additional
3619 # object code and no checking of the asserted conditions.
3621 cdl_component CYGDBG_USE_ASSERTS {
3622 # This option is not active
3623 # The parent CYGPKG_INFRA_DEBUG is disabled
3626 # No user value, uncomment the following line to provide one.
3628 # value_source default
3630 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3631 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3634 # The following properties are affected by this value
3635 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3636 # Requires: CYGDBG_USE_ASSERTS
3637 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3638 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3643 # This option allows individual control of preconditions.
3644 # A precondition is one type of assert, which it is
3645 # useful to control separately from more general asserts.
3646 # The function is CYG_PRECONDITION(condition,msg).
3648 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3649 # This option is not active
3650 # The parent CYGDBG_USE_ASSERTS is not active
3653 # No user value, uncomment the following line to provide one.
3655 # value_source default
3660 # This option allows individual control of postconditions.
3661 # A postcondition is one type of assert, which it is
3662 # useful to control separately from more general asserts.
3663 # The function is CYG_POSTCONDITION(condition,msg).
3665 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3666 # This option is not active
3667 # The parent CYGDBG_USE_ASSERTS is not active
3670 # No user value, uncomment the following line to provide one.
3672 # value_source default
3677 # This option allows individual control of loop invariants.
3678 # A loop invariant is one type of assert, which it is
3679 # useful to control separately from more general asserts,
3680 # particularly since a loop invariant is typically evaluated
3681 # a great many times when used correctly.
3682 # The function is CYG_LOOP_INVARIANT(condition,msg).
3684 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3685 # This option is not active
3686 # The parent CYGDBG_USE_ASSERTS is not active
3689 # No user value, uncomment the following line to provide one.
3691 # value_source default
3696 # All assertions within eCos contain a text message
3697 # which should give some information about the condition
3699 # These text messages will end up being embedded in the
3700 # application image and hence there is a significant penalty
3701 # in terms of image size.
3702 # It is possible to suppress the use of these messages by
3703 # disabling this option.
3704 # This results in smaller code size, but there is less
3705 # human-readable information if an assertion actually gets
3708 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3709 # This option is not active
3710 # The parent CYGDBG_USE_ASSERTS is not active
3713 # No user value, uncomment the following line to provide one.
3715 # value_source default
3721 # If this option is defined, tracing operations
3722 # result in output or logging, depending on other options.
3723 # This may have adverse effects on performance, if the time
3724 # taken to output message overwhelms the available CPU
3725 # power or output bandwidth.
3726 # Trace functions (CYG_TRACE()) are defined in
3727 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3728 # If it is not defined, these result in no additional
3729 # object code and no trace information.
3731 cdl_component CYGDBG_USE_TRACING {
3732 # This option is not active
3733 # The parent CYGPKG_INFRA_DEBUG is disabled
3736 # No user value, uncomment the following line to provide one.
3738 # value_source default
3740 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3741 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3744 # The following properties are affected by this value
3745 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3746 # ActiveIf: CYGDBG_USE_TRACING
3747 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3748 # ActiveIf: CYGDBG_USE_TRACING
3749 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3750 # ActiveIf: CYGDBG_USE_TRACING
3751 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3752 # ActiveIf: CYGDBG_USE_TRACING
3753 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3754 # ActiveIf: CYGDBG_USE_TRACING
3758 # Trace function reports
3759 # This option allows individual control of
3760 # function entry/exit tracing, independent of
3761 # more general tracing output.
3762 # This may be useful to remove clutter from a
3765 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3766 # This option is not active
3767 # The parent CYGDBG_USE_TRACING is not active
3768 # The parent CYGDBG_USE_TRACING is disabled
3771 # No user value, uncomment the following line to provide one.
3773 # value_source default
3778 # All trace calls within eCos contain a text message
3779 # which should give some information about the circumstances.
3780 # These text messages will end up being embedded in the
3781 # application image and hence there is a significant penalty
3782 # in terms of image size.
3783 # It is possible to suppress the use of these messages by
3784 # disabling this option.
3785 # This results in smaller code size, but there is less
3786 # human-readable information available in the trace output,
3787 # possibly only filenames and line numbers.
3789 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3790 # This option is not active
3791 # The parent CYGDBG_USE_TRACING is not active
3792 # The parent CYGDBG_USE_TRACING is disabled
3795 # No user value, uncomment the following line to provide one.
3797 # value_source default
3802 # Trace output implementations
3804 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3805 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3806 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3807 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3808 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3809 # This option is not active
3810 # The parent CYGPKG_INFRA_DEBUG is disabled
3812 # This value cannot be modified here.
3816 # The following properties are affected by this value
3817 # component CYGDBG_USE_ASSERTS
3818 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3819 # component CYGDBG_USE_TRACING
3820 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3824 # A null output module which is useful when
3825 # debugging interactively; the output routines
3826 # can be breakpointed rather than have them actually
3827 # 'print' something.
3829 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3830 # This option is not active
3831 # The parent CYGPKG_INFRA_DEBUG is disabled
3834 # No user value, uncomment the following line to provide one.
3836 # value_source default
3841 # An output module which produces simple output
3842 # from tracing and assertion events.
3844 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3845 # This option is not active
3846 # The parent CYGPKG_INFRA_DEBUG is disabled
3849 # No user value, uncomment the following line to provide one.
3851 # value_source default
3856 # An output module which produces fancy output
3857 # from tracing and assertion events.
3859 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3860 # This option is not active
3861 # The parent CYGPKG_INFRA_DEBUG is disabled
3864 # No user value, uncomment the following line to provide one.
3866 # value_source default
3871 # An output module which buffers output
3872 # from tracing and assertion events. The stored
3873 # messages are output when an assert fires, or
3874 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3876 # Of course, there will only be stored messages
3877 # if tracing per se (CYGDBG_USE_TRACING)
3880 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3881 # This option is not active
3882 # The parent CYGPKG_INFRA_DEBUG is disabled
3885 # No user value, uncomment the following line to provide one.
3887 # value_source default
3893 # The size of the trace buffer. This counts the number
3894 # of trace records stored. When the buffer fills it
3895 # either wraps, stops recording, or generates output.
3897 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3898 # This option is not active
3899 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3900 # ActiveIf constraint: CYGDBG_USE_TRACING
3901 # CYGDBG_USE_TRACING == 0
3905 # No user value, uncomment the following line to provide one.
3907 # value_source default
3909 # Legal values: 5 to 65535
3912 # Wrap trace buffer when full
3913 # When the trace buffer has filled with records it
3914 # starts again at the beginning. Hence only the last
3915 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3918 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3919 # This option is not active
3920 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3921 # ActiveIf constraint: CYGDBG_USE_TRACING
3922 # CYGDBG_USE_TRACING == 0
3926 # No user value, uncomment the following line to provide one.
3928 # value_source default
3932 # Halt trace buffer when full
3933 # When the trace buffer has filled with records it
3934 # stops recording. Hence only the first
3935 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3938 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3939 # This option is not active
3940 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3941 # ActiveIf constraint: CYGDBG_USE_TRACING
3942 # CYGDBG_USE_TRACING == 0
3946 # No user value, uncomment the following line to provide one.
3948 # value_source default
3952 # Print trace buffer when full
3953 # When the trace buffer has filled with records it
3954 # prints the contents of the buffer. The buffer is then
3955 # emptied and the system continues.
3957 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3958 # This option is not active
3959 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3960 # ActiveIf constraint: CYGDBG_USE_TRACING
3961 # CYGDBG_USE_TRACING == 0
3965 # No user value, uncomment the following line to provide one.
3967 # value_source default
3971 # Print trace buffer on assert fail
3972 # When an assertion fails the trace buffer will be
3973 # printed to the default diagnostic device.
3975 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3976 # This option is not active
3977 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3978 # ActiveIf constraint: CYGDBG_USE_TRACING
3979 # CYGDBG_USE_TRACING == 0
3983 # No user value, uncomment the following line to provide one.
3985 # value_source default
3990 # Use function names
3991 # All trace and assert calls within eCos contain a
3992 # reference to the builtin macro '__PRETTY_FUNCTION__',
3993 # which evaluates to a string containing
3994 # the name of the current function.
3995 # This is useful when reading a trace log.
3996 # It is possible to suppress the use of the function name
3997 # by disabling this option.
3998 # This results in smaller code size, but there is less
3999 # human-readable information available in the trace output,
4000 # possibly only filenames and line numbers.
4002 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4003 # This option is not active
4004 # The parent CYGPKG_INFRA_DEBUG is disabled
4007 # No user value, uncomment the following line to provide one.
4009 # value_source default
4015 # Some packages require a startup routine to be called.
4016 # This can be carried out by application code, by supplying
4017 # a routine called cyg_package_start() which calls the
4018 # appropriate package startup routine(s).
4019 # Alternatively, this routine can be constructed automatically
4020 # and configured to call the startup routines of your choice.
4022 cdl_component CYGPKG_INFRA_STARTUP {
4023 # There is no associated value.
4027 # Start uITRON subsystem
4028 # Generate a call to initialize the
4029 # uITRON compatibility subsystem
4030 # within the system version of cyg_package_start().
4031 # This enables compatibility with uITRON.
4032 # You must configure uITRON with the correct tasks before
4033 # starting the uItron subsystem.
4034 # If this is disabled, and you want to use uITRON,
4035 # you must call cyg_uitron_start() from your own
4036 # cyg_package_start() or cyg_userstart().
4038 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4039 # This option is not active
4040 # ActiveIf constraint: CYGPKG_UITRON
4041 # CYGPKG_UITRON (unknown) == 0
4045 # No user value, uncomment the following line to provide one.
4047 # value_source default
4049 # Requires: CYGPKG_UITRON
4050 # CYGPKG_UITRON (unknown) == 0
4055 # Smaller slower memcpy()
4056 # Enabling this option causes the implementation of
4057 # the standard memcpy() routine to reduce code
4058 # size at the expense of execution speed. This
4059 # option is automatically enabled with the use of
4060 # the -Os option to the compiler. Also note that
4061 # the compiler will try to use its own builtin
4062 # version of memcpy() if possible, ignoring the
4063 # implementation in this package, unless given
4064 # the -fno-builtin compiler option.
4066 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4068 # No user value, uncomment the following line to provide one.
4070 # value_source default
4074 # Smaller slower memset()
4075 # Enabling this option causes the implementation of
4076 # the standard memset() routine to reduce code
4077 # size at the expense of execution speed. This
4078 # option is automatically enabled with the use of
4079 # the -Os option to the compiler. Also note that
4080 # the compiler will try to use its own builtin
4081 # version of memset() if possible, ignoring the
4082 # implementation in this package, unless given
4083 # the -fno-builtin compiler option.
4085 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4087 # No user value, uncomment the following line to provide one.
4089 # value_source default
4093 # Provide empty C++ delete functions
4094 # To deal with virtual destructors, where the correct delete()
4095 # function must be called for the derived class in question, the
4096 # underlying delete is called when needed, from destructors. This
4097 # is regardless of whether the destructor is called by delete itself.
4098 # So there is a reference to delete() from all destructors. The
4099 # default builtin delete() attempts to call free() if there is
4100 # one defined. So, if you have destructors, and you have free(),
4101 # as in malloc() and free(), any destructor counts as a reference
4102 # to free(). So the dynamic memory allocation code is linked
4103 # in regardless of whether it gets explicitly called. This
4104 # increases code and data size needlessly.
4105 # To defeat this undesirable behaviour, we define empty versions
4106 # of delete and delete. But doing this prevents proper use
4107 # of dynamic memory in C++ programs via C++'s new and delete
4109 # Therefore, this option is provided
4110 # for explicitly disabling the provision of these empty functions,
4111 # so that new and delete can be used, if that is what is required.
4113 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4115 # No user value, uncomment the following line to provide one.
4117 # value_source default
4121 # Threshold for valid number of delete calls
4122 # Some users don't know about the empty delete function and then
4123 # wonder why their C++ classes are leaking memory. If
4124 # INFRA_DEBUG is enabled we keep a counter for the number of
4125 # times delete is called. If it goes above this threshold we throw
4126 # an assertion failure. This should point heavy users of
4127 # delete in the right direction without upsetting those who want
4128 # an empty delete function.
4130 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4131 # This option is not active
4132 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4133 # CYGPKG_INFRA_DEBUG == 0
4137 # No user value, uncomment the following line to provide one.
4139 # value_source default
4140 # Default value: 100
4143 # Provide dummy abort() function
4144 # This option controls the inclusion of a dummy abort() function.
4145 # Parts of the C and C++ compiler runtime systems contain references
4146 # to abort(), particulary in the C++ exception handling code. It is
4147 # not possible to eliminate these references, so this dummy function
4148 # in included to satisfy them. It is not expected that this function
4149 # will ever be called, so its current behaviour is to simply loop.
4151 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4153 # No user value, uncomment the following line to provide one.
4155 # value_source default
4156 # Default value: CYGINT_ISO_EXIT == 0
4157 # CYGINT_ISO_EXIT == 0
4159 # Requires: !CYGINT_ISO_EXIT
4160 # CYGINT_ISO_EXIT == 0
4164 # Reset platform at end of test case execution
4165 # If this option is set then test case programs will reset the platform
4166 # when they terminate, as opposed to the default which is to just hang
4169 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4171 # No user value, uncomment the following line to provide one.
4173 # value_source default
4177 # Provide dummy strlen() function
4178 # This option controls the inclusion of a dummy strlen() function.
4179 # Parts of the C and C++ compiler runtime systems contain references
4180 # to strlen(), particulary in the C++ exception handling code. It is
4181 # not possible to eliminate these references, so this dummy function
4182 # in included to satisfy them. While it is not expected that this function
4183 # will ever be called, it is functional but uses the simplest, smallest
4184 # algorithm. There is a faster version of strlen() in the C library.
4186 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4188 # No user value, uncomment the following line to provide one.
4190 # value_source default
4191 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4192 # CYGINT_ISO_STRING_STRFUNCS == 1
4194 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4195 # CYGINT_ISO_STRING_STRFUNCS == 1
4199 # Make all compiler warnings show as errors
4200 # Enabling this option will cause all compiler warnings to show
4201 # as errors and bring the library build to a halt. This is used
4202 # to ensure that the code base is warning free, and thus ensure
4203 # that newly introduced warnings stand out and get fixed before
4204 # they show up as weird run-time behavior.
4206 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4211 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4212 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4215 # The following properties are affected by this value
4216 # option CYGBLD_GLOBAL_CFLAGS
4217 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4220 # Make compiler and assembler communicate by pipe
4221 # Enabling this option will cause the compiler to feed the
4222 # assembly output the the assembler via a pipe instead of
4223 # via a temporary file. This normally reduces the build
4226 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4231 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4232 # CYGBLD_GLOBAL_CFLAGS == "-march=armv7-a -mfpu=fpa -mabi=apcs-gnu -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Wno-inline -Wundef -O2 -g -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4236 # Infra build options
4237 # Package specific build options including control over
4238 # compiler flags used only in building this package.
4240 cdl_component CYGPKG_INFRA_OPTIONS {
4241 # There is no associated value.
4245 # Additional compiler flags
4246 # This option modifies the set of compiler flags for
4247 # building the eCos infra package. These flags are used
4248 # in addition to the set of global flags.
4250 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4252 # No user value, uncomment the following line to provide one.
4253 # user_value "-fno-rtti -Woverloaded-virtual"
4254 # value_source default
4255 # Default value: "-fno-rtti -Woverloaded-virtual"
4258 # Suppressed compiler flags
4259 # This option modifies the set of compiler flags for
4260 # building the eCos infra package. These flags are removed from
4261 # the set of global flags if present.
4263 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4265 # No user value, uncomment the following line to provide one.
4266 # user_value -Wno-pointer-sign
4267 # value_source default
4268 # Default value: -Wno-pointer-sign
4271 # Suppressed linker flags
4272 # This option modifies the set of linker flags for
4273 # building the eCos infra package tests. These flags are removed from
4274 # the set of global flags if present.
4276 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4278 # No user value, uncomment the following line to provide one.
4279 # user_value -Wl,--gc-sections
4280 # value_source default
4281 # Default value: -Wl,--gc-sections
4284 # Additional linker flags
4285 # This option modifies the set of linker flags for
4286 # building the eCos infra package tests. These flags are added to
4287 # the set of global flags if present.
4289 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4291 # No user value, uncomment the following line to provide one.
4292 # user_value -Wl,--fatal-warnings
4293 # value_source default
4294 # Default value: -Wl,--fatal-warnings
4297 # Infra package tests
4299 cdl_component CYGPKG_INFRA_TESTS {
4300 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4302 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4306 # Number of times a test runs
4307 # This option controls the number of times tests will execute their
4308 # basic function. Not all tests will honor this setting, but those
4309 # that do will execute the test N times before terminating. A value
4310 # less than 0 indicates to run forever.
4312 cdl_option CYGNUM_TESTS_RUN_COUNT {
4314 # No user value, uncomment the following line to provide one.
4316 # value_source default
4323 # Redboot ROM monitor
4324 # doc: ref/redboot.html
4325 # This package supports the Redboot [stand-alone debug monitor]
4326 # using eCos as the underlying board support mechanism.
4328 cdl_package CYGPKG_REDBOOT {
4329 # Packages cannot be added or removed, nor can their version be changed,
4330 # simply by editing their value. Instead the appropriate configuration
4331 # should be used to perform these actions.
4333 # This value cannot be modified here.
4335 # Current value: 1 current
4336 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4337 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4340 # The following properties are affected by this value
4341 # component CYGPKG_REDBOOT_ARM_OPTIONS
4342 # ActiveIf: CYGPKG_REDBOOT
4343 # component CYGPKG_REDBOOT_HAL_OPTIONS
4344 # ActiveIf: CYGPKG_REDBOOT
4345 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
4346 # ActiveIf: CYGPKG_REDBOOT
4347 # option CYGSEM_IO_ETH_DRIVERS_WARN
4348 # ActiveIf: CYGPKG_REDBOOT
4352 # Include support for ELF file format
4354 cdl_component CYGSEM_REDBOOT_ELF {
4356 # No user value, uncomment the following line to provide one.
4358 # value_source default
4363 # Use the virtual address in the ELF headers
4364 # The ELF headers contain both a virtual and a physical address
4365 # for where code/data should be loaded. By default the physical
4366 # address is used but sometimes it is necassary to use the
4367 # virtual address because of bugy toolchains
4369 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4371 # No user value, uncomment the following line to provide one.
4373 # value_source default
4378 # Methods of loading images using redboot
4380 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4381 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4382 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4383 # This value cannot be modified here.
4387 # The following properties are affected by this value
4388 # component CYGBLD_BUILD_REDBOOT
4389 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4392 # Build Redboot ROM ELF image
4393 # This option enables the building of the Redboot ELF image.
4394 # The image may require further relocation or symbol
4395 # stripping before being converted to a binary image.
4396 # This is handled by a rule in the target CDL.
4398 cdl_component CYGBLD_BUILD_REDBOOT {
4400 # No user value, uncomment the following line to provide one.
4402 # The inferred value should not be edited directly.
4404 # value_source inferred
4406 # Requires: CYGPKG_INFRA
4407 # CYGPKG_INFRA == current
4409 # Requires: CYGPKG_ISOINFRA
4410 # CYGPKG_ISOINFRA == current
4412 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4413 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4415 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4416 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4418 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4419 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4421 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4422 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4424 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4425 # CYGINT_ISO_STRING_MEMFUNCS == 1
4427 # Requires: CYGINT_ISO_STRING_STRFUNCS
4428 # CYGINT_ISO_STRING_STRFUNCS == 1
4430 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4431 # CYGINT_REDBOOT_LOAD_METHOD == 2
4434 # The following properties are affected by this value
4435 # package CYGPKG_HAL_ARM_TX51KARO
4436 # Requires: CYGBLD_BUILD_REDBOOT == 1
4437 # option CYGBLD_BUILD_REDBOOT_BIN
4438 # ActiveIf: CYGBLD_BUILD_REDBOOT
4442 # Include GDB support in RedBoot
4443 # RedBoot normally includes support for the GDB debugging
4444 # protocols. This option allows this to be disabled which
4445 # may yield a substantial savings in terms of code and memory
4448 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4449 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4450 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4455 # The inferred value should not be edited directly.
4459 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4460 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4462 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4463 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4467 # Threads debugging support
4468 # Enabling this option will include special code in the
4469 # GDB stubs to support debugging of threaded programs. In
4470 # the case of eCos programs, this support allows GDB to
4471 # have complete access to the eCos threads in the
4474 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4475 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4476 # CYG_HAL_STARTUP == ROMRAM
4480 # No user value, uncomment the following line to provide one.
4482 # value_source default
4484 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4485 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4489 # Customized version string
4490 # Use this option to define a customized version "string" for
4491 # RedBoot. Note: this value is only cosmetic, displayed by the
4492 # "version" command, but is useful for providing site specific
4493 # information about the RedBoot configuration.
4495 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4497 # No user value, uncomment the following line to provide one.
4499 # The inferred value should not be edited directly.
4500 inferred_value 1 "Ka-Ro 2010-01-06"
4501 # value_source inferred
4502 # Default value: 0 0
4505 # Enable command line editing
4506 # If this option is non-zero, RedBoot will remember the
4507 # last N command lines. These lines may be reused.
4508 # Enabling this history will also enable rudimentary
4509 # editting of the lines themselves.
4511 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4513 # No user value, uncomment the following line to provide one.
4515 # value_source default
4518 # The following properties are affected by this value
4519 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4520 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4521 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4522 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4525 # Enable command line editing using ANSI arrows, etc
4526 # If this option is enabled, RedBoot will accept standard ANSI key
4527 # sequences for cursor movement (along with the emacs style keys).
4529 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4530 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4531 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4535 # No user value, uncomment the following line to provide one.
4537 # value_source default
4541 # Enable history command and expansion
4542 # Enabling this option will allow RedBoot to provide a
4543 # history command to list previous commands. Also enables
4544 # history expansion via '!' character similar to bash
4547 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4549 # No user value, uncomment the following line to provide one.
4551 # value_source default
4553 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4554 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4558 # Number of unique RAM segments on platform
4559 # Change this option to be the number of memory segments which are
4560 # supported by the platform. If the value is greater than 1, then
4561 # a platform specific function must provide information about the
4562 # additional segments.
4564 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4566 # No user value, uncomment the following line to provide one.
4568 # value_source default
4572 # Include support gzip/zlib decompression
4574 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4575 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4576 # CYGPKG_COMPRESS_ZLIB == current
4580 # No user value, uncomment the following line to provide one.
4582 # value_source default
4585 # The following properties are affected by this value
4586 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4587 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4591 # Size of zlib decompression buffer
4592 # This is the size of the buffer filled with incoming data
4593 # during load before calls are made to the decompressor
4594 # function. For ethernet downloads this can be made bigger
4595 # (at the cost of memory), but for serial downloads on slow
4596 # processors it may be necessary to reduce the size to
4597 # avoid serial overruns. zlib appears to bail out if less
4598 # than five bytes are available initially so this is the
4601 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4603 # No user value, uncomment the following line to provide one.
4605 # value_source default
4607 # Legal values: 5 to 256
4610 # Support compression of Flash images
4611 # This CDL indicates whether flash images can
4612 # be decompressed from gzip/zlib format into RAM.
4614 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4615 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4616 # CYGPKG_REDBOOT_FLASH == 1
4618 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4619 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4620 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4623 # Calculated value: 1
4628 # Include GZIP uncompress command
4629 # Enable this option to include a 'gunzip' command
4630 # to uncompress GZIP compressed data.
4632 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4634 # No user value, uncomment the following line to provide one.
4636 # value_source default
4640 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4641 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4643 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4645 # No user value, uncomment the following line to provide one.
4647 # The inferred value should not be edited directly.
4649 # value_source inferred
4652 # The following properties are affected by this value
4653 # option CYGPRI_REDBOOT_ZLIB_FLASH
4654 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4658 # Include support for xyzModem downloads
4659 # doc: ref/download-command.html
4661 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4663 # No user value, uncomment the following line to provide one.
4665 # value_source default
4668 # The following properties are affected by this value
4669 # option CYGPKG_REDBOOT_CFLAGS_ADD
4670 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4673 # Additional compiler flags
4674 # This option modifies the set of compiler flags for
4675 # building the eCos infra package. These flags are used
4676 # in addition to the set of global flags.
4678 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4679 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4680 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4684 # No user value, uncomment the following line to provide one.
4685 # user_value -Wno-inline
4686 # value_source default
4687 # Default value: -Wno-inline
4690 # Allow the load-command write into Flash.
4691 # Write images direct to Flash via the load command.
4692 # We assume anything which is invalid RAM is flash, hence
4693 # the requires statement
4695 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4696 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4697 # CYGPKG_REDBOOT_FLASH == 1
4701 # No user value, uncomment the following line to provide one.
4703 # value_source default
4705 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4706 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4710 # Include MS Windows CE support
4711 # doc: ref/wince.html
4712 # This option enables MS Windows CE EShell support
4713 # and Windows CE .BIN images support
4715 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4722 # Include support for MXC USB downloads
4724 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4726 # No user value, uncomment the following line to provide one.
4728 # value_source default
4732 # Include support for i.MX USB OTG downloads
4734 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4736 # No user value, uncomment the following line to provide one.
4738 # value_source default
4742 # Include POSIX checksum command
4743 # doc: ref/cksum-command.html
4745 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4747 # No user value, uncomment the following line to provide one.
4749 # value_source default
4753 # Include memory fill command
4754 # doc: ref/mfill-command.html
4756 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4758 # No user value, uncomment the following line to provide one.
4760 # value_source default
4764 # Include memory compare command
4765 # doc: ref/mcmp-command.html
4767 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4769 # No user value, uncomment the following line to provide one.
4771 # value_source default
4775 # Include memory copy command
4776 # doc: ref/mcopy-command.html
4778 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4780 # No user value, uncomment the following line to provide one.
4782 # value_source default
4786 # Include memory dump command
4787 # doc: ref/dump-command.html
4789 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4791 # No user value, uncomment the following line to provide one.
4793 # value_source default
4797 # Include cache command
4798 # doc: ref/cache-command.html
4800 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4802 # No user value, uncomment the following line to provide one.
4804 # value_source default
4808 # Include exec command
4809 # doc: ref/exec-command.html
4811 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4813 # No user value, uncomment the following line to provide one.
4815 # value_source default
4818 # The following properties are affected by this value
4819 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4820 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4823 # Include I/O Memory commands 'iopeek' and 'iopoke'
4825 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4827 # No user value, uncomment the following line to provide one.
4829 # value_source default
4833 # Granularity of timer/ticks
4834 # This option controls the granularity of the timers.
4835 # Faster CPUs can afford higher granularity (lower values)
4836 # which should give higher network performance since the stack
4839 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4841 # No user value, uncomment the following line to provide one.
4843 # value_source default
4844 # Default value: 250
4845 # Legal values: 10 25 50 100 250 500 1000
4848 # Redboot Networking
4849 # This option includes networking support in RedBoot.
4851 cdl_component CYGPKG_REDBOOT_NETWORKING {
4852 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4853 # CYGPKG_IO_ETH_DRIVERS == current
4857 # No user value, uncomment the following line to provide one.
4859 # value_source default
4862 # The following properties are affected by this value
4863 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4864 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4868 # Print net debug information
4869 # This option is overriden by the configuration stored
4872 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4874 # No user value, uncomment the following line to provide one.
4876 # value_source default
4880 # Support TFTP for download
4881 # This option enables the use of the TFTP protocol for
4884 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4886 # No user value, uncomment the following line to provide one.
4888 # value_source default
4892 # Support HTTP for download
4893 # This option enables the use of the HTTP protocol for
4896 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4903 # Default IP address
4904 # This IP address is the default used by RedBoot if
4905 # a BOOTP/DHCP server does not respond. The numbers
4906 # should be separated by *commas*, and not dots. If
4907 # an IP address is configured into the Flash
4908 # configuration, that will be used in preference.
4910 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4912 # No user value, uncomment the following line to provide one.
4914 # value_source default
4915 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4916 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4921 # Do not try to use BOOTP
4922 # By default Redboot tries to use BOOTP to get an IP
4923 # address. If there's no BOOTP server on your network
4924 # use this option to avoid to wait until the
4925 # timeout. This option is overriden by the
4926 # configuration stored in flash.
4928 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4929 # This option is not active
4930 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4933 # No user value, uncomment the following line to provide one.
4935 # value_source default
4939 # Default bootp server
4940 # This IP address is the default server
4941 # address used by RedBoot if a BOOTP/DHCP
4942 # server does not respond. The numbers should
4943 # be separated by *commas*, and not dots. If
4944 # an IP address is configured into the Flash
4945 # configuration, that will be used in
4948 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4949 # This option is not active
4950 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4953 # No user value, uncomment the following line to provide one.
4955 # value_source default
4956 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4957 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4962 # Use DHCP to get IP information
4963 # Use DHCP protocol to obtain pertinent IP addresses, such
4964 # as the client, server, gateway, etc.
4966 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4968 # No user value, uncomment the following line to provide one.
4970 # value_source default
4973 # The following properties are affected by this value
4974 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4975 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4978 # Use a gateway for non-local IP traffic
4979 # Enabling this option will allow the RedBoot networking
4980 # stack to use a [single] gateway to reach a non-local
4981 # IP address. If disabled, RedBoot will only be able to
4982 # reach nodes on the same subnet.
4984 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4986 # No user value, uncomment the following line to provide one.
4988 # value_source default
4990 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4991 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
4996 # Default gateway IP address
4997 # This IP address is the default used by RedBoot
4998 # if a BOOTP/DHCP server does not respond. The
4999 # numbers should be separated by *commas*, and
5000 # not dots. If an IP address is configured into
5001 # the Flash configuration, that will be used in
5004 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5006 # No user value, uncomment the following line to provide one.
5008 # value_source default
5009 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5010 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5014 # Default IP address mask
5015 # This IP address mask is the default used by
5016 # RedBoot if a BOOTP/DHCP server does not
5017 # respond. The numbers should be separated by
5018 # *commas*, and not dots. If an IP address is
5019 # configured into the Flash configuration, that
5020 # will be used in preference.
5022 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5024 # No user value, uncomment the following line to provide one.
5026 # value_source default
5027 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5028 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5033 # TCP port to listen for incoming connections
5034 # RedBoot will 'listen' on this port for incoming TCP
5035 # connections. This allows outside connections to be made
5036 # to the platform, either for GDB or RedBoot commands.
5038 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5040 # No user value, uncomment the following line to provide one.
5042 # value_source default
5043 # Default value: 9000
5046 # Number of [network] packet buffers
5047 # RedBoot may need to buffer network data to support
5048 # various connections. This option allows control
5049 # over the number of such buffered packets, and in
5050 # turn, controls the amount of memory used by RedBoot
5051 # (which is not available to user applications).
5052 # Each packet buffer takes up about 1514 bytes.
5053 # Note: there is little need to make this larger than
5056 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5058 # No user value, uncomment the following line to provide one.
5060 # value_source default
5062 # Legal values: 3 to 8
5066 # When this option is enabled, RedBoot will be built with
5067 # support for DNS, allowing use of hostnames on the command
5070 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5071 # This option is not active
5072 # ActiveIf constraint: CYGPKG_NS_DNS
5073 # CYGPKG_NS_DNS (unknown) == 0
5077 # No user value, uncomment the following line to provide one.
5079 # value_source default
5081 # Requires: !CYGPKG_NS_DNS_BUILD
5082 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5088 # This option sets the IP of the default DNS. The IP can be
5089 # changed at runtime as well.
5091 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5092 # This option is not active
5093 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5094 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5095 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5099 # No user value, uncomment the following line to provide one.
5100 # user_value 0.0.0.0
5101 # value_source default
5102 # Default value: 0.0.0.0
5105 # Timeout in DNS lookup
5106 # This option sets the timeout used when looking up an
5107 # address via the DNS. Default is 10 seconds.
5109 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5110 # This option is not active
5111 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5114 # No user value, uncomment the following line to provide one.
5116 # value_source default
5120 # Support the use of a domain name
5121 # This option controls if Redboot supports domain
5122 # names when performing DNS lookups
5124 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5125 # This option is not active
5126 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5129 # No user value, uncomment the following line to provide one.
5131 # value_source default
5136 # Default DNS domain
5137 # This option sets the default DNS domain name.
5138 # This value will be overwritten by the value in
5139 # flash or a domain returned by DHCP
5141 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5142 # This option is not active
5143 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5144 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5147 # No user value, uncomment the following line to provide one.
5149 # value_source default
5150 # Default value: 0 0
5153 # Get DNS domain from Flash
5154 # This option enables getting the domain name
5155 # from the flash configuration. This can later be
5156 # overwritten by a value learnt from DHCP
5158 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5159 # This option is not active
5160 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5161 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5162 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5163 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5167 # No user value, uncomment the following line to provide one.
5169 # value_source default
5173 # Use DNS domain from DHCP
5174 # This option enables the use of the domain name
5177 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5178 # This option is not active
5179 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5180 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5183 # No user value, uncomment the following line to provide one.
5185 # value_source default
5189 # BOOTP/DHCP DNS domain buffer size
5190 # This options sets the size of the static
5191 # buffer used by BOOTP/DHCP to store the DNS
5192 # domain name. The domain name will not be
5193 # set if the buffer is too small to hold it.
5195 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5196 # This option is not active
5197 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5198 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5201 # No user value, uncomment the following line to provide one.
5203 # value_source default
5209 # Default network device driver
5210 # This is the name of the default network device to use.
5212 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5213 # This option is not active
5214 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5215 # CYGHWR_NET_DRIVERS == 1
5219 # No user value, uncomment the following line to provide one.
5221 # value_source default
5222 # Default value: "\"\""
5225 # Initialize only one net device
5226 # This option tells RedBoot to stop initializing network
5227 # devices when it finds the first device which is
5228 # successfully initialized. The default behavior causes
5229 # all network devices to be initialized.
5231 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5232 # This option is not active
5233 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5234 # CYGHWR_NET_DRIVERS == 1
5238 # No user value, uncomment the following line to provide one.
5240 # value_source default
5245 # Let RedBoot use any I/O channel for its console.
5246 # If this option is enabled then RedBoot will attempt to use all
5247 # defined serial I/O channels for its console device. Once input
5248 # arrives at one of these channels then the console will use only
5251 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5253 # No user value, uncomment the following line to provide one.
5255 # The inferred value should not be edited directly.
5257 # value_source inferred
5261 # Let RedBoot adjust the baud rate of the serial console.
5262 # If this option is enabled then RedBoot will support commands
5263 # to set and query the baud rate on the selected console.
5265 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5266 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5267 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5271 # No user value, uncomment the following line to provide one.
5273 # value_source default
5277 # Run a platform specific startup function.
5278 # If this option is enabled then RedBoot will execute a platform
5279 # specific startup function before entering into its command line
5280 # processing. This allows the platform to perform any special
5281 # setups before RedBoot actually starts running. Note: the entire
5282 # RedBoot environment will already be initialized at this point.
5284 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5286 # No user value, uncomment the following line to provide one.
5288 # value_source default
5292 # Run a platform specific ESA validation function.
5293 # If this option is enabled then RedBoot will execute a platform
5294 # specific function to validate an ethernet ESA. This would be
5295 # useful if the address must conform to standards set by the
5296 # hardware manufacturer, etc.
5298 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5300 # No user value, uncomment the following line to provide one.
5302 # The inferred value should not be edited directly.
5304 # value_source inferred
5307 # The following properties are affected by this value
5308 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5309 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5310 # option CYGDAT_DEVS_ETH_ARM_TX51KARO_OUI
5311 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5314 # Maximum command line length
5315 # This option allows control over how long the CLI command line
5316 # should be. This space will be allocated statically
5317 # rather than from RedBoot's stack.
5319 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5321 # No user value, uncomment the following line to provide one.
5323 # The inferred value should not be edited directly.
5325 # value_source inferred
5326 # Default value: 256
5329 # Command processing idle timeout (ms)
5330 # This option controls the timeout period before the
5331 # command processing is considered 'idle'. Making this
5332 # number smaller will cause idle processing to take place
5333 # more often, etc. The default value of 10ms is a reasonable
5334 # tradeoff between responsiveness and overhead.
5336 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5338 # No user value, uncomment the following line to provide one.
5340 # value_source default
5344 # Validate RAM addresses during load
5345 # This option controls whether or not RedBoot will make
5346 # sure that memory being used by the "load" command is
5347 # in fact in user RAM. Leaving the option enabled makes
5348 # for a safer environment, but this check may not be valid
5349 # on all platforms, thus the ability to disable it.
5350 # ** Disable this only with great care **
5352 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5354 # No user value, uncomment the following line to provide one.
5356 # value_source default
5359 # The following properties are affected by this value
5360 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5361 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5364 # Allow RedBoot to support FLASH programming
5365 # If this option is enabled then RedBoot will provide commands
5366 # to manage images in FLASH memory. These images can be loaded
5367 # into memory for execution or executed in place.
5369 cdl_component CYGPKG_REDBOOT_FLASH {
5370 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5371 # CYGHWR_IO_FLASH_DEVICE == 1
5375 # No user value, uncomment the following line to provide one.
5377 # value_source default
5380 # The following properties are affected by this value
5381 # option CYGPRI_REDBOOT_ZLIB_FLASH
5382 # ActiveIf: CYGPKG_REDBOOT_FLASH
5383 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5384 # ActiveIf: CYGPKG_REDBOOT_FLASH
5388 # Byte order used to store info in flash.
5389 # This option controls the byte ordering used to store
5390 # the FIS directory info and flash config info.
5392 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5394 # No user value, uncomment the following line to provide one.
5395 # user_value NATURAL
5396 # value_source default
5397 # Default value: NATURAL
5398 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5401 # RedBoot Flash Image System support
5402 # doc: ref/flash-image-system.html
5403 # This option enables the Flash Image System commands
5404 # and support within RedBoot. If disabled, simple Flash
5405 # access commands such as "fis write" will still exist.
5406 # This option would be disabled for targets that need simple
5407 # FLASH manipulation, but do not have the need or space for
5408 # complete image management.
5410 cdl_option CYGOPT_REDBOOT_FIS {
5412 # No user value, uncomment the following line to provide one.
5414 # value_source default
5417 # The following properties are affected by this value
5418 # component CYGPKG_REDBOOT_FIS_CONTENTS
5419 # ActiveIf: CYGOPT_REDBOOT_FIS
5420 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5421 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5422 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5423 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5426 # Max number of chunks of free space to manage
5427 # If this option is defined then "fis free" will
5428 # rely on the FIS directory to determine what space is
5429 # free within the FLASH. This option controls the
5430 # maximum number of free segment which can be handled
5431 # (typically this number is small). If this option is
5432 # not enabled, the the archaic behaviour of actually
5433 # scanning the FLASH for erased sectors (unreliable)
5434 # will be used to determine what's free and what's
5437 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5439 # No user value, uncomment the following line to provide one.
5441 # value_source default
5442 # Default value: 1 32
5445 # Flash Image System default directory contents
5447 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5448 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5449 # CYGOPT_REDBOOT_FIS == 1
5452 # Calculated value: 1
5458 # Flash block containing the Directory
5459 # Which block of flash should hold the directory
5460 # information. Positive numbers are absolute block
5461 # numbers. Negative block numbers count backwards
5462 # from the last block. eg 2 means block 2, -2
5463 # means the last but one block.
5465 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5467 # No user value, uncomment the following line to provide one.
5469 # value_source default
5472 # The following properties are affected by this value
5473 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5474 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5475 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5478 # Redundant Flash Image System Directory Support
5479 # This option enables the use of a redundant FIS
5480 # directory within RedBoot. If enabled a flash block
5481 # will be reserved for a second copy of the fis
5482 # directory. Doing this allow for power failure safe
5483 # updates of the directory by the application.
5485 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5487 # No user value, uncomment the following line to provide one.
5489 # value_source default
5491 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5492 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5497 # Flash block containing the backup Directory
5498 # Which block of flash should hold the redundant
5499 # directory information. Positive numbers are
5500 # absolute block numbers. Negative block numbers
5501 # count backwards from the last block. eg 2 means
5502 # block 2, -2 means the last but one block.
5504 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5505 # This option is not active
5506 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5509 # No user value, uncomment the following line to provide one.
5511 # value_source default
5513 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5514 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5515 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5516 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5519 # The following properties are affected by this value
5520 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5521 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5522 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5526 # Pseudo-file to describe reserved area
5527 # If an area of FLASH is reserved, it is informative to
5528 # have a fis entry describing it. This option controls
5529 # creation of such an entry by default in the fis init
5532 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5533 # This option is not active
5534 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5535 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5539 # No user value, uncomment the following line to provide one.
5541 # value_source default
5545 # File to describe RedBoot boot image
5546 # Normally a ROM-startup RedBoot image is first in the
5547 # FLASH, and the system boots using that image. This
5548 # option controls creation of an entry describing it in
5549 # the fis init command. It might be disabled if a
5550 # platform has an immutable boot image of its own, where
5551 # we use a POST-startup RedBoot instead, which performs
5552 # less board initialization.
5554 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5556 # No user value, uncomment the following line to provide one.
5558 # value_source default
5561 # The following properties are affected by this value
5562 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5563 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5564 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5565 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5568 # File to describe RedBoot POST-compatible image
5569 # This option controls creation of an entry describing a
5570 # POST-startup RedBoot image in the fis init command.
5571 # Not all platforms support POST-startup. A platform
5572 # might have both for testing purposes, where the
5573 # eventual user would substitute their own POST code for
5574 # the initial ROM-startup RedBoot, and then jump to the
5575 # POST-compatible RedBoot immediately following.
5577 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5579 # No user value, uncomment the following line to provide one.
5581 # value_source default
5582 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5583 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5588 # Offset of POST image from FLASH start
5589 # This option specifies the offset for a POST image from
5590 # the start of FLASH. If unset, then the fis entry
5591 # describing the POST image will be placed where
5594 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5595 # This option is not active
5596 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5599 # No user value, uncomment the following line to provide one.
5601 # value_source default
5602 # Default value: 0 0
5603 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5604 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5605 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5608 # The following properties are affected by this value
5609 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5610 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5614 # File to describe RedBoot backup image
5615 # This option controls creation of an entry describing a
5616 # backup RedBoot image in the fis init command.
5617 # Conventionally a RAM-startup RedBoot image is kept
5618 # under this name for use in updating the ROM-based
5619 # RedBoot that boots the board.
5621 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5623 # No user value, uncomment the following line to provide one.
5625 # value_source default
5629 # Include ARM SIB ID in FIS
5630 # If set, this option will cause the last 5 words of
5631 # the FIS to include the special ID needed for the
5632 # flash to be recognized as a reserved area for RedBoot
5633 # by an ARM BootRom monitor.
5635 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5637 # No user value, uncomment the following line to provide one.
5639 # value_source default
5643 # Size of FIS directory entry
5644 # The FIS directory is limited to one single flash
5645 # sector. If your flash has tiny sectors, you may wish
5646 # to reduce this value in order to get more slots in
5647 # the FIS directory.
5649 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5651 # No user value, uncomment the following line to provide one.
5653 # value_source default
5654 # Default value: 256
5657 # Number of FIS directory entries
5658 # The FIS directory normally occupies a single flash
5659 # sector. Adjusting this value can allow for more than
5660 # one flash sector to be used, which is useful if your
5661 # sectors are very small.
5663 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5665 # No user value, uncomment the following line to provide one.
5667 # value_source default
5671 # Maximum RedBoot image size
5672 # This option controls the maximum length reserved
5673 # for the RedBoot boot image in the FIS table.
5674 # This should be a multiple of the flash's erase
5677 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5679 # No user value, uncomment the following line to provide one.
5680 # user_value 0x00020000
5681 # The inferred value should not be edited directly.
5682 inferred_value 0x00040000
5683 # value_source inferred
5684 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5685 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5689 # Offset from start of FLASH to RedBoot boot image
5690 # This option controls where the RedBoot boot image is
5691 # located relative to the start of FLASH.
5693 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5695 # No user value, uncomment the following line to provide one.
5697 # value_source default
5698 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5699 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5701 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5702 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5703 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5706 # The following properties are affected by this value
5707 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5708 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5709 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5710 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5711 # component CYGPKG_HAL_ARM_TX51_OPTIONS
5712 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5715 # Size of reserved area at start of FLASH
5716 # This option reserves an area at the start of
5717 # FLASH where RedBoot will never interfere; it is
5718 # expected that this area contains
5719 # (non-RedBoot-based) POST code or some other boot
5720 # monitor that executes before RedBoot.
5722 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5724 # No user value, uncomment the following line to provide one.
5726 # value_source default
5729 # The following properties are affected by this value
5730 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5731 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5732 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5733 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5734 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5735 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5739 # Keep all RedBoot FLASH data blocks locked.
5740 # When this option is enabled, RedBoot will keep configuration
5741 # data and the FIS directory blocks implicitly locked. While
5742 # this is somewhat safer, it does add overhead during updates.
5744 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5745 # This option is not active
5746 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5747 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5751 # No user value, uncomment the following line to provide one.
5753 # value_source default
5757 # Use CRC checksums on FIS images.
5758 # When this option is enabled, RedBoot will use CRC checksums
5759 # when reading and writing flash images.
5761 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5763 # No user value, uncomment the following line to provide one.
5765 # The inferred value should not be edited directly.
5767 # value_source inferred
5771 # ARM FLASH drivers support SIB flash block structure
5772 # This interface is implemented by a flash driver
5773 # to indicate that it supports the ARM SIB flash
5776 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5777 # No options implement this inferface
5778 # ActiveIf constraint: CYGPKG_HAL_ARM
5779 # CYGPKG_HAL_ARM == current
5782 # This value cannot be modified here.
5786 # The following properties are affected by this value
5787 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5788 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5791 # Use ARM SIB flash block structure
5792 # This option is used to interpret ARM Flash System
5793 # information blocks.
5795 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5796 # This option is not active
5797 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5798 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5802 # No user value, uncomment the following line to provide one.
5804 # value_source default
5809 # Keep RedBoot configuration data in FLASH
5810 # When this option is enabled, RedBoot will keep configuration
5811 # data in a separate block of FLASH memory. This data will
5812 # include such items as the node IP address or startup scripts.
5814 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5816 # No user value, uncomment the following line to provide one.
5818 # value_source default
5819 # Default value: CYGPKG_IO_FLASH != 0
5820 # CYGPKG_IO_FLASH == current
5823 # The following properties are affected by this value
5824 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5825 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5826 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5827 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5828 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5829 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5830 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5831 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5832 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5833 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5834 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5835 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5836 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5837 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5841 # Length of configuration data in FLASH
5842 # This option is used to control the amount of memory and FLASH
5843 # to be used for configuration options (persistent storage).
5845 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5847 # No user value, uncomment the following line to provide one.
5849 # value_source default
5850 # Default value: 4096
5853 # Style of media used for persistent data storage
5854 # Persistent data storage can either be held in 'norma' FLASH
5855 # or some other device (represented by the 'EEPROM' choice).
5856 # The different styles utilize different access methods.
5858 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5860 # No user value, uncomment the following line to provide one.
5862 # value_source default
5863 # Default value: FLASH
5864 # Legal values: "FLASH" "EEPROM"
5866 # The following properties are affected by this value
5867 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5868 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5869 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5870 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5873 # Merged config data and FIS directory
5874 # If this option is set, then the FIS directory and FLASH
5875 # configuration database will be stored in the same physical
5878 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5879 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5880 # CYGOPT_REDBOOT_FIS == 1
5881 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5885 # No user value, uncomment the following line to provide one.
5887 # value_source default
5890 # The following properties are affected by this value
5891 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5892 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5895 # Which block of flash to use
5896 # Which block of flash should hold the configuration
5897 # information. Positive numbers are absolute block numbers.
5898 # Negative block numbers count backwards from the last block.
5899 # eg 2 means block 2, -2 means the last but one block.
5901 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5903 # No user value, uncomment the following line to provide one.
5905 # value_source default
5909 # Support simple macros/aliases in FLASH
5910 # This option is used to allow support for simple text-based
5911 # macros (aliases). These aliases are kept in the FLASH
5912 # configuration data (persistent storage).
5914 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5916 # No user value, uncomment the following line to provide one.
5918 # value_source default
5922 # Length of strings in FLASH configuration data
5923 # This option is used to control the amount of memory
5924 # and FLASH to be used for string configuration
5925 # options (persistent storage).
5927 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5929 # No user value, uncomment the following line to provide one.
5931 # value_source default
5932 # Default value: 128
5935 # Length of configuration script(s) in FLASH
5936 # This option is used to control the amount of memory and
5937 # FLASH to be used for configuration options (persistent
5940 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5942 # No user value, uncomment the following line to provide one.
5944 # The inferred value should not be edited directly.
5946 # value_source inferred
5947 # Default value: 512
5950 # Fallback to read-only FLASH configuration
5951 # This option will cause the configuration information to
5952 # revert to the readonly information stored in the FLASH.
5953 # The option only takes effect after
5954 # 1) the config_ok flag has been set to be true,
5955 # indicating that at one time the copy in RAM was valid;
5957 # 2) the information in RAM has been verified to be invalid
5959 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5961 # No user value, uncomment the following line to provide one.
5963 # value_source default
5964 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5965 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5970 # Allow RedBoot to support fileio
5971 # If this option is enabled then RedBoot will provide commands
5972 # to load files from fileio file systems such as JFFS2.
5974 cdl_component CYGPKG_REDBOOT_FILEIO {
5975 # This option is not active
5976 # ActiveIf constraint: CYGPKG_IO_FILEIO
5977 # CYGPKG_IO_FILEIO (unknown) == 0
5981 # No user value, uncomment the following line to provide one.
5983 # value_source default
5986 # The following properties are affected by this value
5987 # option CYGNUM_REDBOOT_GETC_BUFFER
5988 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5992 # Include an ls command
5993 # If this option is enabled a simple ls command will be
5994 # included in redboot so the contents of a directory
5997 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
5998 # This option is not active
5999 # The parent CYGPKG_REDBOOT_FILEIO is not active
6002 # No user value, uncomment the following line to provide one.
6004 # value_source default
6009 # Allow RedBoot to support disks
6010 # If this option is enabled then RedBoot will provide commands
6011 # to load disk files.
6013 cdl_component CYGPKG_REDBOOT_DISK {
6021 # Include Redboot commands for disk access
6023 cdl_option CYGSEM_REDBOOT_DISK {
6024 # This option is not active
6025 # The parent CYGPKG_REDBOOT_DISK is disabled
6028 # No user value, uncomment the following line to provide one.
6030 # value_source default
6031 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6032 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6036 # Hardware drivers for disk-type devices
6038 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6039 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6040 # This option is not active
6041 # The parent CYGPKG_REDBOOT_DISK is disabled
6043 # This value cannot be modified here.
6047 # The following properties are affected by this value
6048 # option CYGSEM_REDBOOT_DISK
6049 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6052 # Maximum number of supported disks
6053 # This option controls the number of disks supported by
6056 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6057 # This option is not active
6058 # The parent CYGPKG_REDBOOT_DISK is disabled
6061 # No user value, uncomment the following line to provide one.
6063 # value_source default
6067 # Maximum number of partitions per disk
6068 # This option controls the maximum number of supported
6069 # partitions per disk.
6071 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6072 # This option is not active
6073 # The parent CYGPKG_REDBOOT_DISK is disabled
6076 # No user value, uncomment the following line to provide one.
6078 # value_source default
6082 # Support IDE disks.
6083 # When this option is enabled, RedBoot will support IDE disks.
6085 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6086 # This option is not active
6087 # The parent CYGPKG_REDBOOT_DISK is disabled
6088 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6089 # CYGINT_HAL_PLF_IF_IDE == 0
6093 # No user value, uncomment the following line to provide one.
6095 # value_source default
6100 # Work with VMware virtual disks
6101 # This option controls the disk driver behavior at
6104 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6105 # This option is not active
6106 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6109 # No user value, uncomment the following line to provide one.
6111 # value_source default
6116 # Support Linux second extended filesystems.
6117 # When this option is enabled, RedBoot will support EXT2
6120 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6121 # This option is not active
6122 # The parent CYGPKG_REDBOOT_DISK is disabled
6125 # No user value, uncomment the following line to provide one.
6127 # value_source default
6131 # Support ISO9660 filesystems.
6132 # When this option is enabled, RedBoot will support ISO9660
6135 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6136 # This option is not active
6137 # The parent CYGPKG_REDBOOT_DISK is disabled
6139 # Calculated value: 0
6146 # doc: ref/persistent-state-flash.html
6147 # This contains options related to RedBoot's boot script
6150 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6151 # There is no associated value.
6155 # Boot scripting enabled
6156 # This option controls whether RedBoot boot script
6157 # functionality is enabled.
6159 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6160 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6161 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6162 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6165 # Calculated value: 1
6170 # Use default RedBoot boot script
6171 # If enabled, this option will tell RedBoot to use the
6172 # value of this option as a default boot script.
6174 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6176 # No user value, uncomment the following line to provide one.
6178 # The inferred value should not be edited directly.
6180 # value_source inferred
6181 # Default value: 0 0
6183 # The following properties are affected by this value
6184 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6185 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6188 # Resolution (in ms) for script timeout value.
6189 # This option controls the resolution of the script
6190 # timeout. The value is specified in milliseconds
6191 # (ms), thus to have the script timeout be defined in
6192 # terms of tenths of seconds, use 100.
6194 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6196 # No user value, uncomment the following line to provide one.
6198 # The inferred value should not be edited directly.
6200 # value_source inferred
6201 # Default value: 1000
6204 # Script default timeout value
6205 # This option is used to set the default timeout for startup
6206 # scripts, when they are enabled.
6208 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6210 # No user value, uncomment the following line to provide one.
6212 # The inferred value should not be edited directly.
6214 # value_source inferred
6219 # Support RTC for time & date functions
6220 # When this option is enabled, RedBoot will support commands to
6221 # query and set the real time clock (time and date)
6223 cdl_option CYGSEM_REDBOOT_RTC {
6224 # This option is not active
6225 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6226 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6230 # No user value, uncomment the following line to provide one.
6232 # value_source default
6236 # Behave like a ROM monitor
6237 # Enabling this option will allow RedBoot to provide ROM
6238 # monitor-style services to programs which it executes.
6240 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6241 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6242 # CYG_HAL_STARTUP == ROMRAM
6243 # CYG_HAL_STARTUP == ROMRAM
6246 # Calculated value: 1
6249 # Requires: CYGSEM_HAL_ROM_MONITOR
6250 # CYGSEM_HAL_ROM_MONITOR == 1
6254 # Allow RedBoot to handle GNUPro application 'syscalls'.
6255 # If this option is enabled then RedBoot will install a
6256 # syscall handler to support debugging of applications
6257 # based on GNUPro newlib/bsp.
6259 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6261 # No user value, uncomment the following line to provide one.
6263 # value_source default
6266 # The following properties are affected by this value
6267 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6268 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6269 # option CYGPKG_HAL_GDB_FILEIO
6270 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6274 # Support additional syscalls for 'gprof' profiling
6275 # Support additional syscalls to support a periodic callback
6276 # function for histogram-style profiling, and an enquire/set
6278 # The application must use the GNUPro newlib facilities
6281 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6282 # This option is not active
6283 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6284 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6285 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6289 # No user value, uncomment the following line to provide one.
6291 # value_source default
6295 # Does the HAL support 'gprof' profiling?
6297 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6298 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6299 # This option is not active
6300 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6302 # This value cannot be modified here.
6306 # The following properties are affected by this value
6307 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6308 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6311 # Do not raise SIGTRAP when program exits
6312 # For some (single shot) newlib based programs,
6313 # exiting and returning a termination status may be
6314 # the normal expected behavior.
6316 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6317 # This option is not active
6318 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6321 # No user value, uncomment the following line to provide one.
6323 # value_source default
6328 # Use a common buffer for Zlib and FIS
6329 # Use a common memory buffer for both the zlib workspace
6330 # and FIS directory operations. This can save a substantial
6331 # amount of RAM, especially when flash sectors are large.
6333 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6334 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6335 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6336 # CYGOPT_REDBOOT_FIS == 1
6340 # No user value, uncomment the following line to provide one.
6342 # value_source default
6347 # Size of Zlib/FIS common buffer
6348 # Size of common buffer to allocate. Must be at least the
6349 # size of one flash sector.
6351 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6352 # This option is not active
6353 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6356 # No user value, uncomment the following line to provide one.
6357 # user_value 0x0000C000
6358 # value_source default
6359 # Default value: 0x0000C000
6360 # Legal values: 0x4000 to 0x80000000
6364 # Buffer size in getc when loading images
6365 # When loading images a buffer is used between redboot and the
6366 # underlying storage medium, eg a filesystem, or a socket etc.
6367 # The size of this buffer can have a big impart on load speed.
6369 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6371 # No user value, uncomment the following line to provide one.
6373 # value_source default
6374 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6375 # CYGPKG_REDBOOT_FILEIO == 0
6380 # Redboot for ARM options
6381 # This option lists the target's requirements for a valid Redboot
6384 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6385 # ActiveIf constraint: CYGPKG_REDBOOT
6386 # CYGPKG_REDBOOT == current
6389 # There is no associated value.
6391 # The following properties are affected by this value
6395 # Provide the exec command in RedBoot
6396 # This option contains requirements for booting linux
6397 # from RedBoot. The component is enabled/disabled from
6400 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6401 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6402 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6405 # There is no associated value.
6409 # Enable -x switch for exec command.
6410 # This option allows bi-endian platforms to launch kernels
6411 # built for an endianess different than the RedBoot endianess
6413 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6415 # No user value, uncomment the following line to provide one.
6417 # value_source default
6421 # Physical base address of linux kernel
6422 # This is the physical address of the base of the
6423 # Linux kernel image.
6425 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6427 # No user value, uncomment the following line to provide one.
6428 # user_value 0x90108000
6429 # value_source default
6430 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6431 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6435 # Default physical base address of linux kernel
6436 # This is the physical address of the base of the
6437 # Linux kernel image. This option gets set by the
6440 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6442 # No user value, uncomment the following line to provide one.
6443 # user_value 0x00008000
6444 # The inferred value should not be edited directly.
6445 inferred_value 0x90108000
6446 # value_source inferred
6447 # Default value: 0x00008000
6449 # The following properties are affected by this value
6450 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6451 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6452 # component CYGPKG_REDBOOT_HAL_TX51_OPTIONS
6453 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6456 # Base address of linux kernel parameter tags
6457 # This is the base address of the area of memory used to
6458 # pass parameters to the Linux kernel. This should be chosen
6459 # to avoid overlap with the kernel and any ramdisk image.
6461 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6463 # No user value, uncomment the following line to provide one.
6464 # user_value 0x00000100
6465 # value_source default
6466 # Default value: 0x00000100
6471 # Redboot HAL options
6472 # This option lists the target's requirements for a valid Redboot
6475 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6476 # ActiveIf constraint: CYGPKG_REDBOOT
6477 # CYGPKG_REDBOOT == current
6480 # There is no associated value.
6484 # Build Redboot ROM binary image
6485 # This option enables the conversion of the Redboot ELF
6486 # image to a binary image suitable for ROM programming.
6488 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6489 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6490 # CYGBLD_BUILD_REDBOOT == 1
6494 # No user value, uncomment the following line to provide one.
6496 # value_source default
6501 # Redboot HAL variant options
6503 cdl_component CYGPKG_REDBOOT_HAL_TX51_OPTIONS {
6504 # ActiveIf constraint: CYGPKG_REDBOOT
6505 # CYGPKG_REDBOOT == current
6508 # There is no associated value.
6509 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6510 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x90108000
6515 # ISO C and POSIX infrastructure
6516 # eCos supports implementations of ISO C libraries and POSIX
6517 # implementations. This package provides infrastructure used by
6518 # all such implementations.
6520 cdl_package CYGPKG_ISOINFRA {
6521 # Packages cannot be added or removed, nor can their version be changed,
6522 # simply by editing their value. Instead the appropriate configuration
6523 # should be used to perform these actions.
6525 # This value cannot be modified here.
6527 # Current value: 1 current
6529 # The following properties are affected by this value
6530 # component CYGBLD_BUILD_REDBOOT
6531 # Requires: CYGPKG_ISOINFRA
6532 # package CYGPKG_LIBC_STRING
6533 # Requires: CYGPKG_ISOINFRA
6534 # package CYGPKG_COMPRESS_ZLIB
6535 # Requires: CYGPKG_ISOINFRA
6536 # package CYGPKG_IO_FLASH
6537 # Requires: CYGPKG_ISOINFRA
6538 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6539 # Requires: CYGPKG_ISOINFRA
6540 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6541 # DefaultValue: 0 != CYGPKG_ISOINFRA
6542 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6543 # ActiveIf: CYGPKG_ISOINFRA
6544 # package CYGPKG_LIBC_I18N
6545 # Requires: CYGPKG_ISOINFRA
6546 # package CYGPKG_LIBC_STDLIB
6547 # Requires: CYGPKG_ISOINFRA
6551 # Startup and termination
6553 cdl_component CYGPKG_ISO_STARTUP {
6554 # There is no associated value.
6558 # main() startup implementations
6559 # Implementations of this interface arrange for a user-supplied
6560 # main() to be called in an ISO compatible environment.
6562 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6563 # No options implement this inferface
6564 # This value cannot be modified here.
6567 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6568 # CYGINT_ISO_MAIN_STARTUP == 0
6571 # The following properties are affected by this value
6572 # interface CYGINT_ISO_MAIN_STARTUP
6573 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6576 # environ implementations
6577 # Implementations of this interface provide the environ
6578 # variable required by POSIX.
6580 cdl_interface CYGINT_ISO_ENVIRON {
6581 # No options implement this inferface
6582 # This value cannot be modified here.
6585 # Requires: 1 >= CYGINT_ISO_ENVIRON
6586 # CYGINT_ISO_ENVIRON == 0
6589 # The following properties are affected by this value
6590 # interface CYGINT_ISO_ENVIRON
6591 # Requires: 1 >= CYGINT_ISO_ENVIRON
6597 cdl_component CYGPKG_ISO_CTYPE_H {
6598 # There is no associated value.
6602 # Number of implementations of ctype functions
6604 cdl_interface CYGINT_ISO_CTYPE {
6605 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6606 # This value cannot be modified here.
6609 # Requires: 1 >= CYGINT_ISO_CTYPE
6610 # CYGINT_ISO_CTYPE == 1
6613 # The following properties are affected by this value
6614 # interface CYGINT_ISO_CTYPE
6615 # Requires: 1 >= CYGINT_ISO_CTYPE
6616 # package CYGPKG_HAL_ARM_TX51KARO
6617 # Requires: CYGINT_ISO_CTYPE
6618 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6619 # Requires: CYGINT_ISO_CTYPE
6620 # package CYGPKG_LIBC_STDLIB
6621 # Requires: CYGINT_ISO_CTYPE
6624 # Ctype implementation header
6626 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6628 # No user value, uncomment the following line to provide one.
6630 # The inferred value should not be edited directly.
6631 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6632 # value_source inferred
6633 # Default value: 0 0
6635 # The following properties are affected by this value
6636 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6637 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6638 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6639 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6645 cdl_component CYGPKG_ISO_ERRNO {
6646 # There is no associated value.
6650 # Number of implementations of error codes
6652 cdl_interface CYGINT_ISO_ERRNO_CODES {
6653 # Implemented by CYGPKG_ERROR, active, enabled
6654 # This value cannot be modified here.
6657 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6658 # CYGINT_ISO_ERRNO_CODES == 1
6661 # The following properties are affected by this value
6662 # interface CYGINT_ISO_ERRNO_CODES
6663 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6666 # Error codes implementation header
6668 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6670 # No user value, uncomment the following line to provide one.
6672 # The inferred value should not be edited directly.
6673 inferred_value 1 <cyg/error/codes.h>
6674 # value_source inferred
6675 # Default value: 0 0
6677 # The following properties are affected by this value
6678 # package CYGPKG_ERROR
6679 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6682 # Number of implementations of errno variable
6684 cdl_interface CYGINT_ISO_ERRNO {
6685 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6686 # This value cannot be modified here.
6689 # Requires: 1 >= CYGINT_ISO_ERRNO
6690 # CYGINT_ISO_ERRNO == 1
6693 # The following properties are affected by this value
6694 # interface CYGINT_ISO_ERRNO
6695 # Requires: 1 >= CYGINT_ISO_ERRNO
6698 # errno variable implementation header
6700 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6702 # No user value, uncomment the following line to provide one.
6704 # The inferred value should not be edited directly.
6705 inferred_value 1 <cyg/error/errno.h>
6706 # value_source inferred
6707 # Default value: 0 0
6709 # The following properties are affected by this value
6710 # component CYGPKG_ERROR_ERRNO
6711 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6715 # Locale-related functions
6717 cdl_component CYGPKG_ISO_LOCALE {
6718 # There is no associated value.
6722 # Number of implementations of locale functions
6724 cdl_interface CYGINT_ISO_LOCALE {
6725 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6726 # This value cannot be modified here.
6729 # Requires: 1 >= CYGINT_ISO_LOCALE
6730 # CYGINT_ISO_LOCALE == 1
6733 # The following properties are affected by this value
6734 # interface CYGINT_ISO_LOCALE
6735 # Requires: 1 >= CYGINT_ISO_LOCALE
6738 # Locale implementation header
6740 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6742 # No user value, uncomment the following line to provide one.
6744 # value_source default
6745 # Default value: 0 0
6749 # Standard I/O-related functionality
6751 cdl_component CYGPKG_ISO_STDIO {
6752 # There is no associated value.
6756 # Number of implementations of stdio file types
6758 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6759 # No options implement this inferface
6760 # This value cannot be modified here.
6762 # Current value: 0 0
6763 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6764 # CYGINT_ISO_STDIO_FILETYPES == 0
6767 # The following properties are affected by this value
6768 # interface CYGINT_ISO_STDIO_FILETYPES
6769 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6772 # Stdio file types implementation header
6774 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6776 # No user value, uncomment the following line to provide one.
6778 # value_source default
6779 # Default value: 0 0
6782 # Stdio standard streams implementations
6784 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6785 # No options implement this inferface
6786 # This value cannot be modified here.
6788 # Current value: 0 0
6789 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6790 # CYGINT_ISO_STDIO_STREAMS == 0
6793 # The following properties are affected by this value
6794 # interface CYGINT_ISO_STDIO_STREAMS
6795 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6798 # Stdio standard streams implementation header
6799 # This header file must define stdin, stdout
6802 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6804 # No user value, uncomment the following line to provide one.
6806 # value_source default
6807 # Default value: 0 0
6810 # Number of implementations of stdio file operations
6812 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6813 # No options implement this inferface
6814 # This value cannot be modified here.
6816 # Current value: 0 0
6817 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6818 # CYGINT_ISO_STDIO_FILEOPS == 0
6821 # The following properties are affected by this value
6822 # interface CYGINT_ISO_STDIO_FILEOPS
6823 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6826 # Stdio file operations implementation header
6827 # This header controls the file system operations on a file
6828 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6831 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6833 # No user value, uncomment the following line to provide one.
6835 # value_source default
6836 # Default value: 0 0
6839 # Number of implementations of stdio file access functionals
6841 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6842 # No options implement this inferface
6843 # This value cannot be modified here.
6845 # Current value: 0 0
6846 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6847 # CYGINT_ISO_STDIO_FILEACCESS == 0
6850 # The following properties are affected by this value
6851 # interface CYGINT_ISO_STDIO_FILEACCESS
6852 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6853 # option CYGFUN_COMPRESS_ZLIB_GZIO
6854 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6857 # Stdio file access implementation header
6858 # This header controls the file access operations
6859 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6860 # setvbuf(), and associated constants.
6862 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6864 # No user value, uncomment the following line to provide one.
6866 # value_source default
6867 # Default value: 0 0
6870 # Number of implementations of stdio formatted I/O
6872 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6873 # No options implement this inferface
6874 # This value cannot be modified here.
6876 # Current value: 0 0
6877 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6878 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6881 # The following properties are affected by this value
6882 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6883 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6884 # option CYGFUN_COMPRESS_ZLIB_GZIO
6885 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6888 # Stdio formatted I/O implementation header
6890 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6892 # No user value, uncomment the following line to provide one.
6894 # value_source default
6895 # Default value: 0 0
6898 # Number of implementations of stdio character I/O
6900 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6901 # No options implement this inferface
6902 # This value cannot be modified here.
6904 # Current value: 0 0
6905 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6906 # CYGINT_ISO_STDIO_CHAR_IO == 0
6909 # The following properties are affected by this value
6910 # interface CYGINT_ISO_STDIO_CHAR_IO
6911 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6914 # Stdio character I/O implementation header
6916 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6918 # No user value, uncomment the following line to provide one.
6920 # value_source default
6921 # Default value: 0 0
6924 # Number of implementations of stdio direct I/O
6926 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6927 # No options implement this inferface
6928 # This value cannot be modified here.
6930 # Current value: 0 0
6931 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6932 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6935 # The following properties are affected by this value
6936 # interface CYGINT_ISO_STDIO_DIRECT_IO
6937 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6940 # Stdio direct I/O implementation header
6942 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6944 # No user value, uncomment the following line to provide one.
6946 # value_source default
6947 # Default value: 0 0
6950 # Number of implementations of stdio file positioning
6952 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6953 # No options implement this inferface
6954 # This value cannot be modified here.
6956 # Current value: 0 0
6957 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6958 # CYGINT_ISO_STDIO_FILEPOS == 0
6961 # The following properties are affected by this value
6962 # interface CYGINT_ISO_STDIO_FILEPOS
6963 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6964 # option CYGFUN_COMPRESS_ZLIB_GZIO
6965 # Requires: CYGINT_ISO_STDIO_FILEPOS
6968 # Stdio file positioning implementation header
6970 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6972 # No user value, uncomment the following line to provide one.
6974 # value_source default
6975 # Default value: 0 0
6978 # Number of implementations of stdio error handling
6980 cdl_interface CYGINT_ISO_STDIO_ERROR {
6981 # No options implement this inferface
6982 # This value cannot be modified here.
6984 # Current value: 0 0
6985 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6986 # CYGINT_ISO_STDIO_ERROR == 0
6989 # The following properties are affected by this value
6990 # interface CYGINT_ISO_STDIO_ERROR
6991 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6994 # Stdio error handling implementation header
6996 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
6998 # No user value, uncomment the following line to provide one.
7000 # value_source default
7001 # Default value: 0 0
7004 # POSIX fd-related function implementations
7006 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7007 # No options implement this inferface
7008 # This value cannot be modified here.
7010 # Current value: 0 0
7011 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7012 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7015 # The following properties are affected by this value
7016 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7017 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7020 # POSIX fd-related function implementation header
7022 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7024 # No user value, uncomment the following line to provide one.
7026 # value_source default
7027 # Default value: 0 0
7031 # Standard general utility functions
7033 cdl_component CYGPKG_ISO_STDLIB {
7034 # There is no associated value.
7038 # String conversion function implementations
7040 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7041 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7042 # This value cannot be modified here.
7045 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7046 # CYGINT_ISO_STDLIB_STRCONV == 1
7049 # The following properties are affected by this value
7050 # interface CYGINT_ISO_STDLIB_STRCONV
7051 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7054 # String conversion function implementation header
7056 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7058 # No user value, uncomment the following line to provide one.
7060 # The inferred value should not be edited directly.
7061 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7062 # value_source inferred
7063 # Default value: 0 0
7065 # The following properties are affected by this value
7066 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7067 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7070 # String to FP conversion function implementations
7072 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7073 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7074 # This value cannot be modified here.
7077 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7078 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7081 # The following properties are affected by this value
7082 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7083 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7086 # String to FP conversion function implementation header
7088 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7090 # No user value, uncomment the following line to provide one.
7092 # value_source default
7093 # Default value: 0 0
7096 # Random number generator implementations
7098 cdl_interface CYGINT_ISO_RAND {
7099 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7100 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7101 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7102 # This value cannot be modified here.
7105 # Requires: 1 >= CYGINT_ISO_RAND
7106 # CYGINT_ISO_RAND == 1
7109 # The following properties are affected by this value
7110 # interface CYGINT_ISO_RAND
7111 # Requires: 1 >= CYGINT_ISO_RAND
7114 # Random number generator implementation header
7116 cdl_option CYGBLD_ISO_RAND_HEADER {
7118 # No user value, uncomment the following line to provide one.
7120 # value_source default
7121 # Default value: 0 0
7124 # Malloc implementations
7126 cdl_interface CYGINT_ISO_MALLOC {
7127 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7128 # This value cannot be modified here.
7131 # Requires: 1 >= CYGINT_ISO_MALLOC
7132 # CYGINT_ISO_MALLOC == 1
7135 # The following properties are affected by this value
7136 # interface CYGINT_ISO_MALLOC
7137 # Requires: 1 >= CYGINT_ISO_MALLOC
7138 # option CYGFUN_LIBC_STRING_STRDUP
7139 # ActiveIf: CYGINT_ISO_MALLOC
7142 # Malloc implementation header
7144 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7146 # No user value, uncomment the following line to provide one.
7148 # value_source default
7149 # Default value: 0 0
7152 # Mallinfo() implementations
7154 cdl_interface CYGINT_ISO_MALLINFO {
7155 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7156 # This value cannot be modified here.
7159 # Requires: 1 >= CYGINT_ISO_MALLINFO
7160 # CYGINT_ISO_MALLINFO == 1
7163 # The following properties are affected by this value
7164 # interface CYGINT_ISO_MALLINFO
7165 # Requires: 1 >= CYGINT_ISO_MALLINFO
7168 # Mallinfo() implementation header
7170 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7172 # No user value, uncomment the following line to provide one.
7174 # value_source default
7175 # Default value: 0 0
7178 # Program exit functionality implementations
7180 cdl_interface CYGINT_ISO_EXIT {
7181 # No options implement this inferface
7182 # This value cannot be modified here.
7185 # Requires: 1 >= CYGINT_ISO_EXIT
7186 # CYGINT_ISO_EXIT == 0
7189 # The following properties are affected by this value
7190 # interface CYGINT_ISO_EXIT
7191 # Requires: 1 >= CYGINT_ISO_EXIT
7192 # option CYGFUN_INFRA_DUMMY_ABORT
7193 # Requires: !CYGINT_ISO_EXIT
7194 # option CYGFUN_INFRA_DUMMY_ABORT
7195 # DefaultValue: CYGINT_ISO_EXIT == 0
7198 # Program exit functionality implementation header
7200 cdl_option CYGBLD_ISO_EXIT_HEADER {
7202 # No user value, uncomment the following line to provide one.
7204 # value_source default
7205 # Default value: 0 0
7208 # Program environment implementations
7210 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7211 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7212 # This value cannot be modified here.
7215 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7216 # CYGINT_ISO_STDLIB_ENVIRON == 1
7219 # The following properties are affected by this value
7220 # interface CYGINT_ISO_STDLIB_ENVIRON
7221 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7224 # Program environment implementation header
7226 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7228 # No user value, uncomment the following line to provide one.
7230 # value_source default
7231 # Default value: 0 0
7234 # system() implementations
7236 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7237 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7238 # This value cannot be modified here.
7241 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7242 # CYGINT_ISO_STDLIB_SYSTEM == 1
7245 # The following properties are affected by this value
7246 # interface CYGINT_ISO_STDLIB_SYSTEM
7247 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7250 # system() implementation header
7252 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7254 # No user value, uncomment the following line to provide one.
7256 # value_source default
7257 # Default value: 0 0
7260 # bsearch() implementations
7262 cdl_interface CYGINT_ISO_BSEARCH {
7263 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7264 # This value cannot be modified here.
7267 # Requires: 1 >= CYGINT_ISO_BSEARCH
7268 # CYGINT_ISO_BSEARCH == 1
7271 # The following properties are affected by this value
7272 # interface CYGINT_ISO_BSEARCH
7273 # Requires: 1 >= CYGINT_ISO_BSEARCH
7276 # bsearch() implementation header
7278 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7280 # No user value, uncomment the following line to provide one.
7282 # value_source default
7283 # Default value: 0 0
7286 # qsort() implementations
7288 cdl_interface CYGINT_ISO_QSORT {
7289 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7290 # This value cannot be modified here.
7293 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7294 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7297 # The following properties are affected by this value
7300 # qsort() implementation header
7302 cdl_option CYGBLD_ISO_QSORT_HEADER {
7304 # No user value, uncomment the following line to provide one.
7306 # value_source default
7307 # Default value: 0 0
7310 # abs()/labs() implementations
7312 cdl_interface CYGINT_ISO_ABS {
7313 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7314 # This value cannot be modified here.
7317 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7318 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7321 # The following properties are affected by this value
7324 # abs()/labs() implementation header
7326 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7328 # No user value, uncomment the following line to provide one.
7330 # The inferred value should not be edited directly.
7331 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7332 # value_source inferred
7333 # Default value: 0 0
7335 # The following properties are affected by this value
7336 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7337 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7340 # div()/ldiv() implementations
7342 cdl_interface CYGINT_ISO_DIV {
7343 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7344 # This value cannot be modified here.
7347 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7348 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7351 # The following properties are affected by this value
7354 # div()/ldiv() implementation header
7356 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7358 # No user value, uncomment the following line to provide one.
7360 # The inferred value should not be edited directly.
7361 inferred_value 1 <cyg/libc/stdlib/div.inl>
7362 # value_source inferred
7363 # Default value: 0 0
7365 # The following properties are affected by this value
7366 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7367 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7370 # Header defining the implementation's MB_CUR_MAX
7372 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7374 # No user value, uncomment the following line to provide one.
7376 # value_source default
7377 # Default value: 0 0
7379 # The following properties are affected by this value
7380 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7381 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7384 # Multibyte character implementations
7386 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7387 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7388 # This value cannot be modified here.
7391 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7392 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7395 # The following properties are affected by this value
7396 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7397 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7400 # Multibyte character implementation header
7402 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7404 # No user value, uncomment the following line to provide one.
7406 # value_source default
7407 # Default value: 0 0
7413 cdl_component CYGPKG_ISO_STRING {
7414 # There is no associated value.
7418 # Number of implementations of strerror() function
7420 cdl_interface CYGINT_ISO_STRERROR {
7421 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7422 # This value cannot be modified here.
7424 # Current value: 1 1
7425 # Requires: 1 >= CYGINT_ISO_STRERROR
7426 # CYGINT_ISO_STRERROR == 1
7429 # The following properties are affected by this value
7430 # interface CYGINT_ISO_STRERROR
7431 # Requires: 1 >= CYGINT_ISO_STRERROR
7434 # strerror() implementation header
7436 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7438 # No user value, uncomment the following line to provide one.
7440 # The inferred value should not be edited directly.
7441 inferred_value 1 <cyg/error/strerror.h>
7442 # value_source inferred
7443 # Default value: 0 0
7445 # The following properties are affected by this value
7446 # option CYGPKG_ERROR_STRERROR
7447 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7450 # memcpy() implementation header
7452 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7454 # No user value, uncomment the following line to provide one.
7456 # value_source default
7457 # Default value: 0 0
7460 # memset() implementation header
7462 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7464 # No user value, uncomment the following line to provide one.
7466 # value_source default
7467 # Default value: 0 0
7470 # Number of implementations of strtok_r() function
7472 cdl_interface CYGINT_ISO_STRTOK_R {
7473 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7474 # This value cannot be modified here.
7476 # Current value: 1 1
7477 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7478 # CYGINT_ISO_STRTOK_R == 1
7481 # The following properties are affected by this value
7482 # interface CYGINT_ISO_STRTOK_R
7483 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7486 # strtok_r() implementation header
7488 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7490 # No user value, uncomment the following line to provide one.
7492 # The inferred value should not be edited directly.
7493 inferred_value 1 <cyg/libc/string/string.h>
7494 # value_source inferred
7495 # Default value: 0 0
7497 # The following properties are affected by this value
7498 # package CYGPKG_LIBC_STRING
7499 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7502 # Number of implementations of locale-specific string functions
7503 # This covers locale-dependent string functions such as strcoll()
7506 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7507 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7508 # This value cannot be modified here.
7510 # Current value: 1 1
7511 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7512 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7515 # The following properties are affected by this value
7516 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7517 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7520 # Locale-specific string functions' implementation header
7521 # This covers locale-dependent string functions such as strcoll()
7524 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7526 # No user value, uncomment the following line to provide one.
7528 # The inferred value should not be edited directly.
7529 inferred_value 1 <cyg/libc/string/string.h>
7530 # value_source inferred
7531 # Default value: 0 0
7533 # The following properties are affected by this value
7534 # package CYGPKG_LIBC_STRING
7535 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7538 # Number of implementations of BSD string functions
7540 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7541 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7542 # This value cannot be modified here.
7544 # Current value: 0 0
7545 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7546 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7549 # The following properties are affected by this value
7550 # interface CYGINT_ISO_STRING_BSD_FUNCS
7551 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7554 # BSD string functions' implementation header
7556 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7558 # No user value, uncomment the following line to provide one.
7560 # The inferred value should not be edited directly.
7561 inferred_value 1 <cyg/libc/string/bsdstring.h>
7562 # value_source inferred
7563 # Default value: 0 0
7565 # The following properties are affected by this value
7566 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7567 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7570 # Number of implementations of other mem*() functions
7572 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7573 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7574 # This value cannot be modified here.
7576 # Current value: 1 1
7577 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7578 # CYGINT_ISO_STRING_MEMFUNCS == 1
7581 # The following properties are affected by this value
7582 # interface CYGINT_ISO_STRING_MEMFUNCS
7583 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7584 # component CYGBLD_BUILD_REDBOOT
7585 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7586 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7587 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7590 # Other mem*() functions' implementation header
7592 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7594 # No user value, uncomment the following line to provide one.
7596 # The inferred value should not be edited directly.
7597 inferred_value 1 <cyg/libc/string/string.h>
7598 # value_source inferred
7599 # Default value: 0 0
7601 # The following properties are affected by this value
7602 # package CYGPKG_LIBC_STRING
7603 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7606 # Number of implementations of other ISO C str*() functions
7607 # This covers the other str*() functions defined by ISO C.
7609 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7610 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7611 # This value cannot be modified here.
7613 # Current value: 1 1
7614 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7615 # CYGINT_ISO_STRING_STRFUNCS == 1
7618 # The following properties are affected by this value
7619 # interface CYGINT_ISO_STRING_STRFUNCS
7620 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7621 # option CYGFUN_INFRA_DUMMY_STRLEN
7622 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7623 # option CYGFUN_INFRA_DUMMY_STRLEN
7624 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7625 # component CYGBLD_BUILD_REDBOOT
7626 # Requires: CYGINT_ISO_STRING_STRFUNCS
7627 # component CYGPKG_IO_ETH_DRIVERS_NET
7628 # Requires: CYGINT_ISO_STRING_STRFUNCS
7629 # option CYGFUN_COMPRESS_ZLIB_GZIO
7630 # Requires: CYGINT_ISO_STRING_STRFUNCS
7631 # package CYGPKG_IO_FLASH
7632 # Requires: CYGINT_ISO_STRING_STRFUNCS
7633 # package CYGPKG_LIBC_STDLIB
7634 # Requires: CYGINT_ISO_STRING_STRFUNCS
7637 # Other ISO C str*() functions' implementation header
7638 # This covers the other str*() functions defined by ISO C.
7640 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7642 # No user value, uncomment the following line to provide one.
7644 # The inferred value should not be edited directly.
7645 inferred_value 1 <cyg/libc/string/string.h>
7646 # value_source inferred
7647 # Default value: 0 0
7649 # The following properties are affected by this value
7650 # package CYGPKG_LIBC_STRING
7651 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7655 # Clock and time functionality
7657 cdl_component CYGPKG_ISO_TIME {
7658 # There is no associated value.
7662 # time_t implementation header
7664 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7666 # No user value, uncomment the following line to provide one.
7668 # value_source default
7669 # Default value: 0 0
7672 # clock_t implementation header
7674 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7676 # No user value, uncomment the following line to provide one.
7678 # value_source default
7679 # Default value: 0 0
7682 # struct timeval implementation header
7684 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7686 # No user value, uncomment the following line to provide one.
7688 # value_source default
7689 # Default value: 0 0
7692 # fnmatch implementation header
7694 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7696 # No user value, uncomment the following line to provide one.
7698 # value_source default
7699 # Default value: 0 0
7702 # Number of implementations of POSIX timer types
7704 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7705 # No options implement this inferface
7706 # This value cannot be modified here.
7708 # Current value: 0 0
7709 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7710 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7713 # The following properties are affected by this value
7714 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7715 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7718 # POSIX timer types implementation header
7720 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7722 # No user value, uncomment the following line to provide one.
7724 # value_source default
7725 # Default value: 0 0
7728 # Number of implementations of POSIX clock types
7730 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7731 # No options implement this inferface
7732 # This value cannot be modified here.
7734 # Current value: 0 0
7735 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7736 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7739 # The following properties are affected by this value
7740 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7741 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7744 # POSIX clock types implementation header
7746 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7748 # No user value, uncomment the following line to provide one.
7750 # value_source default
7751 # Default value: 0 0
7754 # Number of implementations of ISO C types
7756 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7757 # No options implement this inferface
7758 # This value cannot be modified here.
7760 # Current value: 0 0
7761 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7762 # CYGINT_ISO_C_TIME_TYPES == 0
7765 # The following properties are affected by this value
7766 # interface CYGINT_ISO_C_TIME_TYPES
7767 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7770 # ISO C time types implementation header
7772 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7774 # No user value, uncomment the following line to provide one.
7776 # value_source default
7777 # Default value: 0 0
7780 # Number of implementations of POSIX timers
7782 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7783 # No options implement this inferface
7784 # This value cannot be modified here.
7786 # Current value: 0 0
7787 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7788 # CYGINT_ISO_POSIX_TIMERS == 0
7791 # The following properties are affected by this value
7792 # interface CYGINT_ISO_POSIX_TIMERS
7793 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7796 # POSIX timer implementation header
7798 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7800 # No user value, uncomment the following line to provide one.
7802 # value_source default
7803 # Default value: 0 0
7806 # Number of implementations of POSIX clocks
7808 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7809 # No options implement this inferface
7810 # This value cannot be modified here.
7812 # Current value: 0 0
7813 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7814 # CYGINT_ISO_POSIX_CLOCKS == 0
7817 # The following properties are affected by this value
7818 # interface CYGINT_ISO_POSIX_CLOCKS
7819 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7822 # POSIX clocks implementation header
7824 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7826 # No user value, uncomment the following line to provide one.
7828 # value_source default
7829 # Default value: 0 0
7832 # Number of implementations of ISO C clock functions
7834 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7835 # No options implement this inferface
7836 # This value cannot be modified here.
7838 # Current value: 0 0
7839 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7840 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7843 # The following properties are affected by this value
7844 # interface CYGINT_ISO_C_CLOCK_FUNCS
7845 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7848 # ISO C clock functions' implementation header
7850 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7852 # No user value, uncomment the following line to provide one.
7854 # value_source default
7855 # Default value: 0 0
7858 # Number of implementations of tzset() function
7860 cdl_interface CYGINT_ISO_TZSET {
7861 # No options implement this inferface
7862 # This value cannot be modified here.
7864 # Current value: 0 0
7865 # Requires: 1 >= CYGINT_ISO_TZSET
7866 # CYGINT_ISO_TZSET == 0
7869 # The following properties are affected by this value
7870 # interface CYGINT_ISO_TZSET
7871 # Requires: 1 >= CYGINT_ISO_TZSET
7874 # tzset() implementation header
7876 cdl_option CYGBLD_ISO_TZSET_HEADER {
7878 # No user value, uncomment the following line to provide one.
7880 # value_source default
7881 # Default value: 0 0
7885 # Signal functionality
7887 cdl_component CYGPKG_ISO_SIGNAL {
7888 # There is no associated value.
7892 # Number of implementations of signal numbers
7894 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7895 # No options implement this inferface
7896 # This value cannot be modified here.
7899 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7900 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7903 # The following properties are affected by this value
7904 # interface CYGINT_ISO_SIGNAL_NUMBERS
7905 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7908 # Signal numbering implementation header
7909 # This header provides the mapping of signal
7910 # names (e.g. SIGBUS) to numbers.
7912 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7914 # No user value, uncomment the following line to provide one.
7916 # value_source default
7917 # Default value: 0 0
7920 # Number of signal implementations
7922 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7923 # No options implement this inferface
7924 # This value cannot be modified here.
7927 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7928 # CYGINT_ISO_SIGNAL_IMPL == 0
7931 # The following properties are affected by this value
7932 # interface CYGINT_ISO_SIGNAL_IMPL
7933 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7936 # Signals implementation header
7938 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7940 # No user value, uncomment the following line to provide one.
7942 # value_source default
7943 # Default value: 0 0
7946 # POSIX real time signals feature test macro
7947 # This defines the POSIX feature test macro
7948 # that indicates that the POSIX real time signals
7951 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7952 # No options implement this inferface
7953 # This value cannot be modified here.
7956 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7957 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7960 # The following properties are affected by this value
7961 # interface CYGINT_POSIX_REALTIME_SIGNALS
7962 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7966 # Non-local jumps functionality
7968 cdl_component CYGPKG_ISO_SETJMP {
7969 # There is no associated value.
7973 # setjmp() / longjmp() implementations
7975 cdl_interface CYGINT_ISO_SETJMP {
7976 # No options implement this inferface
7977 # This value cannot be modified here.
7980 # Requires: 1 >= CYGINT_ISO_SETJMP
7981 # CYGINT_ISO_SETJMP == 0
7984 # The following properties are affected by this value
7985 # interface CYGINT_ISO_SETJMP
7986 # Requires: 1 >= CYGINT_ISO_SETJMP
7989 # setjmp() / longjmp() implementation header
7991 cdl_option CYGBLD_ISO_SETJMP_HEADER {
7993 # No user value, uncomment the following line to provide one.
7995 # value_source default
7996 # Default value: 0 0
7999 # sigsetjmp() / siglongjmp() implementations
8001 cdl_interface CYGINT_ISO_SIGSETJMP {
8002 # No options implement this inferface
8003 # This value cannot be modified here.
8006 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8007 # CYGINT_ISO_SIGSETJMP == 0
8010 # The following properties are affected by this value
8011 # interface CYGINT_ISO_SIGSETJMP
8012 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8015 # sigsetjmp() / siglongjmp() implementation header
8017 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8019 # No user value, uncomment the following line to provide one.
8021 # value_source default
8022 # Default value: 0 0
8026 # Assertions implementation header
8028 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8030 # No user value, uncomment the following line to provide one.
8032 # value_source default
8033 # Default value: 0 0
8036 # POSIX file control
8037 # This covers the POSIX file control definitions,
8038 # normally found in <fcntl.h>
8040 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8041 # There is no associated value.
8045 # POSIX open flags implementation header
8047 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8049 # No user value, uncomment the following line to provide one.
8051 # value_source default
8052 # Default value: 0 0
8055 # POSIX fcntl() implementations
8057 cdl_interface CYGINT_ISO_FCNTL {
8058 # No options implement this inferface
8059 # This value cannot be modified here.
8062 # Requires: 1 >= CYGINT_ISO_FCNTL
8063 # CYGINT_ISO_FCNTL == 0
8066 # The following properties are affected by this value
8067 # interface CYGINT_ISO_FCNTL
8068 # Requires: 1 >= CYGINT_ISO_FCNTL
8071 # POSIX fcntl() implementation header
8073 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8075 # No user value, uncomment the following line to provide one.
8077 # value_source default
8078 # Default value: 0 0
8081 # POSIX file open implementations
8083 cdl_interface CYGINT_ISO_OPEN {
8084 # No options implement this inferface
8085 # This value cannot be modified here.
8088 # Requires: 1 >= CYGINT_ISO_OPEN
8089 # CYGINT_ISO_OPEN == 0
8092 # The following properties are affected by this value
8093 # interface CYGINT_ISO_OPEN
8094 # Requires: 1 >= CYGINT_ISO_OPEN
8097 # POSIX file open implementation header
8099 cdl_option CYGBLD_ISO_OPEN_HEADER {
8101 # No user value, uncomment the following line to provide one.
8103 # value_source default
8104 # Default value: 0 0
8108 # <sys/stat.h> definitions implementation header
8110 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8112 # No user value, uncomment the following line to provide one.
8114 # value_source default
8115 # Default value: 0 0
8118 # POSIX directory reading implementation
8120 cdl_interface CYGINT_ISO_DIRENT {
8121 # No options implement this inferface
8122 # This value cannot be modified here.
8125 # Requires: 1 >= CYGINT_ISO_DIRENT
8126 # CYGINT_ISO_DIRENT == 0
8129 # The following properties are affected by this value
8130 # interface CYGINT_ISO_DIRENT
8131 # Requires: 1 >= CYGINT_ISO_DIRENT
8134 # <dirent.h> definitions implementation header
8136 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8138 # No user value, uncomment the following line to provide one.
8140 # value_source default
8141 # Default value: 0 0
8144 # POSIX <sys/types.h> contents
8145 # This covers the types required by POSIX to be in
8148 cdl_component CYGPKG_ISO_POSIX_TYPES {
8149 # There is no associated value.
8153 # POSIX thread types implementations
8155 cdl_interface CYGINT_ISO_PTHREADTYPES {
8156 # No options implement this inferface
8157 # This value cannot be modified here.
8160 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8161 # CYGINT_ISO_PTHREADTYPES == 0
8164 # The following properties are affected by this value
8165 # interface CYGINT_ISO_PTHREADTYPES
8166 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8167 # interface CYGINT_ISO_PMUTEXTYPES
8168 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8171 # POSIX thread types implementation header
8173 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8175 # No user value, uncomment the following line to provide one.
8177 # value_source default
8178 # Default value: 0 0
8181 # POSIX mutex types implementations
8183 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8184 # No options implement this inferface
8185 # This value cannot be modified here.
8188 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8189 # CYGINT_ISO_PTHREADTYPES == 0
8193 # POSIX mutex types implementation header
8195 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8197 # No user value, uncomment the following line to provide one.
8199 # value_source default
8200 # Default value: 0 0
8203 # ssize_t implementation header
8205 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8207 # No user value, uncomment the following line to provide one.
8209 # value_source default
8210 # Default value: 0 0
8213 # Filesystem types implementation header
8215 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8217 # No user value, uncomment the following line to provide one.
8219 # value_source default
8220 # Default value: 0 0
8223 # gid_t, pid_t, uid_t implementation header
8225 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8227 # No user value, uncomment the following line to provide one.
8229 # value_source default
8230 # Default value: 0 0
8234 # Non-POSIX <sys/types.h> contents
8235 # This covers the extra types required by non-POSIX
8236 # packages to be in <sys/types.h>. These would normally
8237 # only be visible if _POSIX_SOURCE is not defined.
8239 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8240 # There is no associated value.
8244 # BSD compatible types
8246 cdl_interface CYGINT_ISO_BSDTYPES {
8247 # No options implement this inferface
8248 # This value cannot be modified here.
8251 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8252 # CYGINT_ISO_BSDTYPES == 0
8255 # The following properties are affected by this value
8256 # interface CYGINT_ISO_BSDTYPES
8257 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8262 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8264 # No user value, uncomment the following line to provide one.
8266 # value_source default
8267 # Default value: 0 0
8273 cdl_component CYGPKG_ISO_UTSNAME {
8274 # There is no associated value.
8280 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8282 # No user value, uncomment the following line to provide one.
8284 # value_source default
8285 # Default value: 0 0
8291 cdl_component CYGPKG_ISO_SCHED {
8292 # There is no associated value.
8296 # POSIX scheduler implementations
8298 cdl_interface CYGINT_ISO_SCHED_IMPL {
8299 # No options implement this inferface
8300 # This value cannot be modified here.
8303 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8304 # CYGINT_ISO_SCHED_IMPL == 0
8307 # The following properties are affected by this value
8308 # interface CYGINT_ISO_SCHED_IMPL
8309 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8312 # POSIX scheduler implementation header
8314 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8316 # No user value, uncomment the following line to provide one.
8318 # value_source default
8319 # Default value: 0 0
8325 cdl_component CYGPKG_ISO_SEMAPHORES {
8326 # There is no associated value.
8330 # POSIX semaphore implementations
8332 cdl_interface CYGINT_ISO_SEMAPHORES {
8333 # No options implement this inferface
8334 # This value cannot be modified here.
8337 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8338 # CYGINT_ISO_SEMAPHORES == 0
8341 # The following properties are affected by this value
8342 # interface CYGINT_ISO_SEMAPHORES
8343 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8346 # POSIX semaphore implementation header
8348 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8350 # No user value, uncomment the following line to provide one.
8352 # value_source default
8353 # Default value: 0 0
8357 # POSIX message queues
8359 cdl_component CYGPKG_ISO_MQUEUE {
8360 # There is no associated value.
8366 cdl_interface CYGINT_ISO_MQUEUE {
8367 # No options implement this inferface
8368 # This value cannot be modified here.
8371 # Requires: 1 >= CYGINT_ISO_MQUEUE
8372 # CYGINT_ISO_MQUEUE == 0
8375 # The following properties are affected by this value
8376 # interface CYGINT_ISO_MQUEUE
8377 # Requires: 1 >= CYGINT_ISO_MQUEUE
8378 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8379 # ActiveIf: CYGINT_ISO_MQUEUE
8380 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8381 # ActiveIf: CYGINT_ISO_MQUEUE
8384 # Implementation header
8386 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8388 # No user value, uncomment the following line to provide one.
8390 # value_source default
8391 # Default value: 0 0
8394 # Maximum number of open message queues
8396 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8397 # This option is not active
8398 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8399 # CYGINT_ISO_MQUEUE == 0
8403 # No user value, uncomment the following line to provide one.
8405 # value_source default
8406 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8407 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8408 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8412 # Maximum number of message priorities
8414 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8415 # This option is not active
8416 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8417 # CYGINT_ISO_MQUEUE == 0
8421 # No user value, uncomment the following line to provide one.
8422 # user_value 1 65535
8423 # value_source default
8424 # Default value: 1 65535
8430 cdl_component CYGPKG_ISO_PTHREAD {
8431 # There is no associated value.
8435 # POSIX pthread implementations
8437 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8438 # No options implement this inferface
8439 # This value cannot be modified here.
8441 # Current value: 0 0
8442 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8443 # CYGINT_ISO_PTHREAD_IMPL == 0
8446 # The following properties are affected by this value
8447 # interface CYGINT_ISO_PTHREAD_IMPL
8448 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8451 # POSIX pthread implementation header
8453 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8455 # No user value, uncomment the following line to provide one.
8457 # value_source default
8458 # Default value: 0 0
8461 # POSIX mutex/cond var implementations
8463 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8464 # No options implement this inferface
8465 # This value cannot be modified here.
8467 # Current value: 0 0
8468 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8469 # CYGINT_ISO_PTHREAD_MUTEX == 0
8472 # The following properties are affected by this value
8473 # interface CYGINT_ISO_PTHREAD_MUTEX
8474 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8477 # POSIX mutex/cond var implementation header
8479 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8481 # No user value, uncomment the following line to provide one.
8483 # value_source default
8484 # Default value: 0 0
8490 cdl_component CYGPKG_ISO_LIMITS {
8491 # There is no associated value.
8495 # POSIX pthread limits implementations
8497 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8498 # No options implement this inferface
8499 # This value cannot be modified here.
8502 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8503 # CYGINT_ISO_POSIX_LIMITS == 0
8506 # The following properties are affected by this value
8507 # interface CYGINT_ISO_POSIX_LIMITS
8508 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8511 # POSIX pthread limits implementation header
8513 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8515 # No user value, uncomment the following line to provide one.
8517 # value_source default
8518 # Default value: 0 0
8521 # OPEN_MAX implementation header
8523 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8525 # No user value, uncomment the following line to provide one.
8527 # value_source default
8528 # Default value: 0 0
8531 # LINK_MAX implementation header
8533 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8535 # No user value, uncomment the following line to provide one.
8537 # value_source default
8538 # Default value: 0 0
8541 # NAME_MAX implementation header
8543 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8545 # No user value, uncomment the following line to provide one.
8547 # value_source default
8548 # Default value: 0 0
8551 # PATH_MAX implementation header
8553 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8555 # No user value, uncomment the following line to provide one.
8557 # value_source default
8558 # Default value: 0 0
8564 cdl_component CYGPKG_ISO_TERMIOS {
8565 # There is no associated value.
8569 # POSIX termios implementations
8571 cdl_interface CYGINT_ISO_TERMIOS {
8572 # No options implement this inferface
8573 # This value cannot be modified here.
8576 # Requires: 1 >= CYGINT_ISO_TERMIOS
8577 # CYGINT_ISO_TERMIOS == 0
8580 # The following properties are affected by this value
8581 # interface CYGINT_ISO_TERMIOS
8582 # Requires: 1 >= CYGINT_ISO_TERMIOS
8585 # POSIX termios implementation header
8587 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8589 # No user value, uncomment the following line to provide one.
8591 # value_source default
8592 # Default value: 0 0
8598 cdl_component CYGPKG_ISO_DLFCN {
8599 # There is no associated value.
8603 # Dynamic load implementations
8605 cdl_interface CYGINT_ISO_DLFCN {
8606 # No options implement this inferface
8607 # This value cannot be modified here.
8610 # Requires: 1 >= CYGINT_ISO_DLFCN
8611 # CYGINT_ISO_DLFCN == 0
8614 # The following properties are affected by this value
8615 # interface CYGINT_ISO_DLFCN
8616 # Requires: 1 >= CYGINT_ISO_DLFCN
8619 # Dynamic load implementation header
8621 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8623 # No user value, uncomment the following line to provide one.
8625 # value_source default
8626 # Default value: 0 0
8630 # UNIX standard functions
8632 cdl_component CYGPKG_ISO_UNISTD {
8633 # There is no associated value.
8637 # POSIX timer operations implementations
8639 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8640 # No options implement this inferface
8641 # This value cannot be modified here.
8643 # Current value: 0 0
8644 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8645 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8648 # The following properties are affected by this value
8649 # interface CYGINT_ISO_POSIX_TIMER_OPS
8650 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8653 # POSIX timer operations implementation header
8655 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8657 # No user value, uncomment the following line to provide one.
8659 # value_source default
8660 # Default value: 0 0
8663 # POSIX sleep() implementations
8665 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8666 # No options implement this inferface
8667 # This value cannot be modified here.
8669 # Current value: 0 0
8670 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8671 # CYGINT_ISO_POSIX_SLEEP == 0
8674 # The following properties are affected by this value
8675 # interface CYGINT_ISO_POSIX_SLEEP
8676 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8679 # POSIX sleep() implementation header
8681 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8683 # No user value, uncomment the following line to provide one.
8685 # value_source default
8686 # Default value: 0 0
8690 # select()/poll() functions
8692 cdl_component CYGPKG_ISO_SELECT {
8693 # There is no associated value.
8697 # select() implementations
8699 cdl_interface CYGINT_ISO_SELECT {
8700 # No options implement this inferface
8701 # This value cannot be modified here.
8703 # Current value: 0 0
8704 # Requires: 1 >= CYGINT_ISO_SELECT
8705 # CYGINT_ISO_SELECT == 0
8708 # The following properties are affected by this value
8709 # interface CYGINT_ISO_SELECT
8710 # Requires: 1 >= CYGINT_ISO_SELECT
8713 # select() implementation header
8715 cdl_option CYGBLD_ISO_SELECT_HEADER {
8717 # No user value, uncomment the following line to provide one.
8719 # value_source default
8720 # Default value: 0 0
8723 # poll() implementations
8725 cdl_interface CYGINT_ISO_POLL {
8726 # No options implement this inferface
8727 # This value cannot be modified here.
8729 # Current value: 0 0
8730 # Requires: 1 >= CYGINT_ISO_POLL
8731 # CYGINT_ISO_POLL == 0
8734 # The following properties are affected by this value
8735 # interface CYGINT_ISO_POLL
8736 # Requires: 1 >= CYGINT_ISO_POLL
8739 # poll() implementation header
8741 cdl_option CYGBLD_ISO_POLL_HEADER {
8743 # No user value, uncomment the following line to provide one.
8745 # value_source default
8746 # Default value: 0 0
8750 # NetDB utility functions
8752 cdl_component CYGPKG_ISO_NETDB {
8753 # There is no associated value.
8757 # DNS implementations
8759 cdl_interface CYGINT_ISO_DNS {
8760 # No options implement this inferface
8761 # This value cannot be modified here.
8764 # Requires: 1 >= CYGINT_ISO_DNS
8765 # CYGINT_ISO_DNS == 0
8768 # The following properties are affected by this value
8769 # interface CYGINT_ISO_DNS
8770 # Requires: 1 >= CYGINT_ISO_DNS
8773 # DNS implementation header
8775 cdl_option CYGBLD_ISO_DNS_HEADER {
8777 # No user value, uncomment the following line to provide one.
8779 # value_source default
8780 # Default value: 0 0
8783 # Protocol network database implementations
8785 cdl_interface CYGINT_ISO_NETDB_PROTO {
8786 # No options implement this inferface
8787 # This value cannot be modified here.
8790 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8791 # CYGINT_ISO_NETDB_PROTO == 0
8794 # The following properties are affected by this value
8795 # interface CYGINT_ISO_NETDB_PROTO
8796 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8799 # Protocol network database implementation header
8801 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8803 # No user value, uncomment the following line to provide one.
8805 # value_source default
8806 # Default value: 0 0
8809 # Services network database implementations
8811 cdl_interface CYGINT_ISO_NETDB_SERV {
8812 # No options implement this inferface
8813 # This value cannot be modified here.
8816 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8817 # CYGINT_ISO_NETDB_SERV == 0
8820 # The following properties are affected by this value
8821 # interface CYGINT_ISO_NETDB_SERV
8822 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8825 # Services network database implementation header
8827 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8829 # No user value, uncomment the following line to provide one.
8831 # value_source default
8832 # Default value: 0 0
8837 # Package specific build options including control over
8838 # compiler flags used only in building this package,
8839 # and details of which tests are built.
8841 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8842 # There is no associated value.
8846 # Additional compiler flags
8847 # This option modifies the set of compiler flags for
8848 # building the ISO C and POSIX infrastructure package.
8849 # These flags are used in addition to the set of global flags.
8851 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8853 # No user value, uncomment the following line to provide one.
8855 # value_source default
8859 # Suppressed compiler flags
8860 # This option modifies the set of compiler flags for
8861 # building the ISO C and POSIX infrastructure package.
8862 # These flags are removed from the set of global flags
8865 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8867 # No user value, uncomment the following line to provide one.
8869 # value_source default
8876 # doc: ref/services-crc.html
8877 # This package provides support for CRC calculation. Currently
8878 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8879 # Gary S. Brown, and a 16 bit CRC.
8881 cdl_package CYGPKG_CRC {
8882 # Packages cannot be added or removed, nor can their version be changed,
8883 # simply by editing their value. Instead the appropriate configuration
8884 # should be used to perform these actions.
8886 # This value cannot be modified here.
8888 # Current value: 1 current
8890 # The following properties are affected by this value
8891 # package CYGPKG_COMPRESS_ZLIB
8892 # Requires: CYGPKG_CRC
8898 cdl_option CYGPKG_CRC_TESTS {
8899 # Calculated value: "tests/crc_test"
8901 # Current_value: tests/crc_test
8905 # Zlib compress and decompress package
8906 # This package provides support for compression and
8909 cdl_package CYGPKG_COMPRESS_ZLIB {
8910 # Packages cannot be added or removed, nor can their version be changed,
8911 # simply by editing their value. Instead the appropriate configuration
8912 # should be used to perform these actions.
8914 # This value cannot be modified here.
8916 # Current value: 1 current
8917 # Requires: CYGPKG_ISOINFRA
8918 # CYGPKG_ISOINFRA == current
8920 # Requires: CYGPKG_CRC
8921 # CYGPKG_CRC == current
8924 # The following properties are affected by this value
8925 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8926 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8930 # Override memory allocation routines.
8932 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8933 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8934 # This value cannot be modified here.
8938 # The following properties are affected by this value
8939 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8940 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8943 # Should deflate() produce 'gzip' compatible output?
8944 # If this option is set then the output of calling deflate()
8945 # will be wrapped up as a 'gzip' compatible file.
8947 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8949 # No user value, uncomment the following line to provide one.
8951 # value_source default
8955 # Does this library need malloc?
8956 # This pseudo-option will force the memalloc library to be
8957 # required iff the application does not provide it's own
8960 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8961 # This option is not active
8962 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8963 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8967 # No user value, uncomment the following line to provide one.
8969 # value_source default
8971 # Requires: CYGPKG_MEMALLOC
8972 # CYGPKG_MEMALLOC == current
8976 # Include stdio-like utility functions
8977 # This option enables the stdio-like zlib utility functions
8978 # (gzread/gzwrite and friends) provided in gzio.c.
8980 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8982 # No user value, uncomment the following line to provide one.
8984 # value_source default
8985 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8986 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8988 # Requires: CYGINT_ISO_STDIO_FILEPOS
8989 # CYGINT_ISO_STDIO_FILEPOS == 0
8991 # Requires: CYGINT_ISO_STRING_STRFUNCS
8992 # CYGINT_ISO_STRING_STRFUNCS == 1
8994 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
8995 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
8997 # Requires: CYGINT_ISO_STDIO_FILEACCESS
8998 # CYGINT_ISO_STDIO_FILEACCESS == 0
9002 # Zlib compress and decompress package build options
9003 # Package specific build options including control over
9004 # compiler flags used only in building this package,
9005 # and details of which tests are built.
9007 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9008 # There is no associated value.
9012 # Additional compiler flags
9013 # This option modifies the set of compiler flags for
9014 # building this package. These flags are used in addition
9015 # to the set of global flags.
9017 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9019 # No user value, uncomment the following line to provide one.
9020 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9021 # value_source default
9022 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9025 # Suppressed compiler flags
9026 # This option modifies the set of compiler flags for
9027 # building this package. These flags are removed from
9028 # the set of global flags if present.
9030 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9032 # No user value, uncomment the following line to provide one.
9033 # user_value -Wstrict-prototypes
9034 # value_source default
9035 # Default value: -Wstrict-prototypes
9038 # Additional compiler flags
9039 # This option modifies the set of compiler flags for
9040 # building this package. These flags are used in addition
9041 # to the set of global flags.
9043 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9045 # No user value, uncomment the following line to provide one.
9047 # value_source default
9051 # Suppressed compiler flags
9052 # This option modifies the set of compiler flags for
9053 # building this package. These flags are removed from
9054 # the set of global flags if present.
9056 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9058 # No user value, uncomment the following line to provide one.
9060 # value_source default
9067 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9068 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9070 # Current_value: tests/zlib1.c tests/zlib2.c
9074 # FLASH device drivers
9075 # doc: ref/flash.html
9076 # This option enables drivers for basic I/O services on
9079 cdl_package CYGPKG_IO_FLASH {
9080 # Packages cannot be added or removed, nor can their version be changed,
9081 # simply by editing their value. Instead the appropriate configuration
9082 # should be used to perform these actions.
9084 # This value cannot be modified here.
9086 # Current value: 1 current
9087 # Requires: CYGPKG_ISOINFRA
9088 # CYGPKG_ISOINFRA == current
9090 # Requires: CYGINT_ISO_STRING_STRFUNCS
9091 # CYGINT_ISO_STRING_STRFUNCS == 1
9094 # The following properties are affected by this value
9095 # component CYGSEM_REDBOOT_FLASH_CONFIG
9096 # DefaultValue: CYGPKG_IO_FLASH != 0
9097 # package CYGPKG_DEVS_FLASH_ONMXC
9098 # ActiveIf: CYGPKG_IO_FLASH
9102 # Hardware FLASH device drivers
9103 # This option enables the hardware device drivers
9104 # for the current platform.
9106 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9107 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9108 # This value cannot be modified here.
9112 # The following properties are affected by this value
9113 # component CYGPKG_REDBOOT_FLASH
9114 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9117 # Hardware FLASH device drivers are not in RAM
9118 # Use of this interface is deprecated.
9119 # Drivers should make sure that the functions are
9120 # linked to RAM by putting them in .2ram sections.
9122 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9123 # No options implement this inferface
9124 # This value cannot be modified here.
9126 # Current value: 0 0
9127 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9128 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9131 # The following properties are affected by this value
9132 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9133 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9136 # Hardware can support block locking
9137 # This option will be enabled by devices which can support
9138 # locking (write-protection) of individual blocks.
9140 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9141 # No options implement this inferface
9142 # This value cannot be modified here.
9144 # Current value: 0 0
9146 # The following properties are affected by this value
9147 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9148 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9151 # Hardware cannot support direct access to FLASH memory
9152 # This option will be asserted by devices which cannot support
9153 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9154 # devices). In these cases, the driver must provide an appropriate
9155 # hardware access function.
9157 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9159 # No user value, uncomment the following line to provide one.
9161 # The inferred value should not be edited directly.
9163 # value_source inferred
9165 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9166 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9169 # The following properties are affected by this value
9170 # option CYGPRI_REDBOOT_ZLIB_FLASH
9171 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9172 # component CYGHWR_DEVS_FLASH_MMC
9173 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9174 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9175 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9176 # option CYGHWR_DEVS_FLASH_MMC_SD
9177 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9178 # option CYGHWR_DEVS_FLASH_MXC_NAND
9179 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9182 # Display status messages during flash operations
9183 # Selecting this option will cause the drivers to print status
9184 # messages as various flash operations are undertaken.
9186 cdl_option CYGSEM_IO_FLASH_CHATTER {
9188 # No user value, uncomment the following line to provide one.
9190 # value_source default
9194 # Verify data programmed to flash
9195 # Selecting this option will cause verification of data
9196 # programmed to flash.
9198 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9200 # No user value, uncomment the following line to provide one.
9202 # The inferred value should not be edited directly.
9204 # value_source inferred
9207 # The following properties are affected by this value
9208 # option CYGSEM_IO_FLASH_READ_INDIRECT
9209 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9212 # Platform has flash soft DIP switch write-protect
9213 # Selecting this option will cause the state of a hardware jumper or
9214 # dipswitch to be read by software to determine whether the flash is
9215 # write-protected or not.
9217 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9219 # No user value, uncomment the following line to provide one.
9221 # value_source default
9225 # Instantiate in I/O block device API
9226 # Provides a block device accessible using the standard I/O
9227 # API ( cyg_io_read() etc. )
9229 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9230 # This option is not active
9231 # ActiveIf constraint: CYGPKG_IO
9232 # CYGPKG_IO (unknown) == 0
9236 # No user value, uncomment the following line to provide one.
9238 # value_source default
9243 # Name of flash device 1 block device
9245 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9246 # This option is not active
9247 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9248 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9251 # No user value, uncomment the following line to provide one.
9252 # user_value "\"/dev/flash1\""
9253 # value_source default
9254 # Default value: "\"/dev/flash1\""
9259 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9260 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9261 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9262 # This option is not active
9263 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9265 # This value cannot be modified here.
9268 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9269 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9272 # The following properties are affected by this value
9273 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9274 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9277 # Static configuration
9278 # This configures the flash device 1 block device
9279 # with static base and length
9281 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9282 # This option is not active
9283 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9286 # No user value, uncomment the following line to provide one.
9288 # value_source default
9293 # Start offset from flash base
9294 # This gives the offset from the base of flash which this
9295 # block device corresponds to.
9297 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9298 # This option is not active
9299 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9302 # No user value, uncomment the following line to provide one.
9303 # user_value 0x00100000
9304 # value_source default
9305 # Default value: 0x00100000
9309 # This gives the length of the region of flash given over
9310 # to this block device.
9312 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9313 # This option is not active
9314 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9317 # No user value, uncomment the following line to provide one.
9318 # user_value 0x00100000
9319 # value_source default
9320 # Default value: 0x00100000
9324 # Configuration from FIS
9325 # This configures the flash device 1 block device
9328 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9329 # This option is not active
9330 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9333 # No user value, uncomment the following line to provide one.
9335 # value_source default
9342 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9343 # This option is not active
9344 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9345 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9348 # No user value, uncomment the following line to provide one.
9349 # user_value "\"jffs2\""
9350 # value_source default
9351 # Default value: "\"jffs2\""
9357 # Flash device driver build options
9358 # Package specific build options including control over
9359 # compiler flags used only in building this package,
9360 # and details of which tests are built.
9362 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9363 # There is no associated value.
9367 # Additional compiler flags
9368 # This option modifies the set of compiler flags for
9369 # building the flash device drivers. These flags are used in addition
9370 # to the set of global flags.
9372 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9374 # No user value, uncomment the following line to provide one.
9376 # value_source default
9380 # Suppressed compiler flags
9381 # This option modifies the set of compiler flags for
9382 # building the flash device drivers. These flags are removed from
9383 # the set of global flags if present.
9385 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9387 # No user value, uncomment the following line to provide one.
9389 # value_source default
9393 # Flash device driver tests
9394 # This option specifies the set of tests for the flash device drivers.
9396 cdl_component CYGPKG_IO_FLASH_TESTS {
9397 # Calculated value: "tests/flash1"
9399 # Current_value: tests/flash1
9403 # Start offset from flash base
9404 # This gives the offset from the base of flash where tests
9405 # can be run. It is important to set this correctly, as an
9406 # incorrect value could allow the tests to write over critical
9407 # portions of the FLASH device and possibly render the target
9408 # board totally non-functional.
9410 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9412 # No user value, uncomment the following line to provide one.
9413 # user_value 0x00100000
9414 # value_source default
9415 # Default value: 0x00100000
9419 # This gives the length of the region of flash used for testing.
9421 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9423 # No user value, uncomment the following line to provide one.
9424 # user_value 0x00100000
9425 # value_source default
9426 # Default value: 0x00100000
9431 # Support FLASH memory on Freescale MXC platforms
9433 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9434 # Packages cannot be added or removed, nor can their version be changed,
9435 # simply by editing their value. Instead the appropriate configuration
9436 # should be used to perform these actions.
9438 # ActiveIf constraint: CYGPKG_IO_FLASH
9439 # CYGPKG_IO_FLASH == current
9442 # This value cannot be modified here.
9444 # Current value: 1 current
9448 # MXC platform MMC card support
9449 # When this option is enabled, it indicates MMC card is
9450 # supported on the MXC platforms
9452 cdl_component CYGHWR_DEVS_FLASH_MMC {
9454 # No user value, uncomment the following line to provide one.
9456 # value_source default
9458 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9459 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9462 # The following properties are affected by this value
9463 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9464 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9465 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9466 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9467 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9468 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9469 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9470 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9474 # MXC platform MMC card for newer SDHC controllers
9476 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9477 # This option is not active
9478 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9479 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37_3STACK || CYGPKG_HAL_ARM_MX35_3STACK || CYGPKG_HAL_ARM_MX25_3STACK || CYGPKG_HAL_ARM_MX51
9480 # CYGPKG_HAL_ARM_MX37_3STACK (unknown) == 0
9481 # CYGPKG_HAL_ARM_MX35_3STACK (unknown) == 0
9482 # CYGPKG_HAL_ARM_MX25_3STACK (unknown) == 0
9483 # CYGPKG_HAL_ARM_MX51 == current
9487 # No user value, uncomment the following line to provide one.
9489 # value_source default
9491 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9492 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9496 # MXC platform MMC card for older MMC/SD controllers
9498 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9499 # This option is not active
9500 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9501 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9502 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9503 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9507 # No user value, uncomment the following line to provide one.
9509 # value_source default
9511 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9512 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9517 # MXC platform NOR flash memory support
9518 # When this option is enabled, it indicates NOR flash is
9519 # supported on the MXC platforms
9521 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9523 # No user value, uncomment the following line to provide one.
9525 # The inferred value should not be edited directly.
9527 # value_source inferred
9530 # The following properties are affected by this value
9531 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9532 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9533 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9534 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9535 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9536 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9537 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9538 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9539 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9540 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9543 # MXC platform NAND flash memory support
9544 # When this option is enabled, it indicates NAND flash is
9545 # supported on the MXC platforms
9547 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9549 # No user value, uncomment the following line to provide one.
9551 # The inferred value should not be edited directly.
9553 # value_source inferred
9555 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9556 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9559 # The following properties are affected by this value
9560 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9561 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9562 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9563 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9564 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9565 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9566 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9567 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9568 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9569 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9570 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9571 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9574 # i.MX platform SPI NOR flash memory support
9575 # When this option is enabled, it indicates SPI NOR flash is
9576 # supported on the i.MX platforms
9578 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9580 # No user value, uncomment the following line to provide one.
9582 # value_source default
9584 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9585 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9589 # MXC platform ATA support
9590 # When this option is enabled, it indicates ATA is
9591 # supported on the MXC platforms
9593 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9595 # No user value, uncomment the following line to provide one.
9597 # value_source default
9601 # Use a flash based Bad Block Table
9603 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9604 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9605 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9608 # There is no associated value.
9612 # When this option is enabled, the driver will search for a flash
9613 # based bad block table
9615 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9617 # No user value, uncomment the following line to provide one.
9619 # value_source default
9623 # header file defining the NAND BBT descriptor
9624 # defines the name of the header file that describes the BBT layout
9626 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9628 # No user value, uncomment the following line to provide one.
9630 # The inferred value should not be edited directly.
9631 inferred_value 1 <cyg/io/tx51_nand_bbt.h>
9632 # value_source inferred
9633 # Default value: 0 0
9636 # Number of blocks to reserve for BBT
9637 # Number of blocks to reserve for BBT
9639 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9641 # No user value, uncomment the following line to provide one.
9643 # value_source default
9648 # MXC platform multi flash memory support
9649 # When this option is enabled, it indicates multi flashes are
9650 # supported on the MXC platforms (like NAND and NOR)
9652 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9653 # This option is not active
9654 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9655 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9656 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9657 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9658 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9659 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9660 # CYGHWR_DEVS_FLASH_MMC == 0
9661 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9662 # CYGHWR_DEVS_FLASH_MMC == 0
9666 # No user value, uncomment the following line to provide one.
9668 # The inferred value should not be edited directly.
9670 # value_source inferred
9674 # MXC platform NAND flash reset workaround support
9675 # When this option is enabled, it indicates 0xFFFF is used for
9676 # the NAND reset command instead of 0xFF.
9678 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9679 # No options implement this inferface
9680 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9681 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9684 # This value cannot be modified here.
9691 # Dynamic memory allocation
9692 # doc: ref/memalloc.html
9693 # This package provides memory allocator infrastructure required for
9694 # dynamic memory allocators, including the ISO standard malloc
9695 # interface. It also contains some sample implementations.
9697 cdl_package CYGPKG_MEMALLOC {
9698 # Packages cannot be added or removed, nor can their version be changed,
9699 # simply by editing their value. Instead the appropriate configuration
9700 # should be used to perform these actions.
9702 # This value cannot be modified here.
9704 # Current value: 1 current
9706 # The following properties are affected by this value
9707 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9708 # Requires: CYGPKG_MEMALLOC
9712 # Memory allocator implementations
9713 # This component contains configuration options related to the
9714 # various memory allocators available.
9716 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9717 # There is no associated value.
9721 # Fixed block allocator
9722 # This component contains configuration options related to the
9723 # fixed block memory allocator.
9725 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9726 # There is no associated value.
9731 # With this option enabled, this allocator will be
9732 # made thread-safe. Additionally allocation functions
9733 # are made available that allow a thread to wait
9734 # until memory is available.
9736 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9737 # This option is not active
9738 # ActiveIf constraint: CYGPKG_KERNEL
9739 # CYGPKG_KERNEL (unknown) == 0
9743 # No user value, uncomment the following line to provide one.
9745 # value_source default
9750 # Simple variable block allocator
9751 # This component contains configuration options related to the
9752 # simple variable block memory allocator. This allocator is not
9753 # very fast, and in particular does not scale well with large
9754 # numbers of allocations. It is however very compact in terms of
9755 # code size and does not have very much overhead per allocation.
9757 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9758 # There is no associated value.
9763 # With this option enabled, this allocator will be
9764 # made thread-safe. Additionally allocation functions
9765 # are added that allow a thread to wait until memory
9766 # are made available that allow a thread to wait
9767 # until memory is available.
9769 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9770 # This option is not active
9771 # ActiveIf constraint: CYGPKG_KERNEL
9772 # CYGPKG_KERNEL (unknown) == 0
9776 # No user value, uncomment the following line to provide one.
9778 # value_source default
9783 # The variable-block memory allocator can perform coalescing
9784 # of memory whenever the application code releases memory back
9785 # to the pool. This coalescing reduces the possibility of
9786 # memory fragmentation problems, but involves extra code and
9789 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9791 # No user value, uncomment the following line to provide one.
9793 # value_source default
9796 # The following properties are affected by this value
9797 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9798 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9803 # This component contains configuration options related to the
9804 # port of Doug Lea's memory allocator, normally known as
9805 # dlmalloc. dlmalloc has a reputation for being both fast
9806 # and space-conserving, as well as resisting fragmentation well.
9807 # It is a common choice for a general purpose allocator and
9808 # has been used in both newlib and Linux glibc.
9810 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9811 # There is no associated value.
9816 # Doug Lea's malloc implementation has substantial amounts
9817 # of internal checking in order to verify the operation
9818 # and consistency of the allocator. However this imposes
9819 # substantial overhead on each operation. Therefore this
9820 # checking may be individually disabled.
9822 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9824 # No user value, uncomment the following line to provide one.
9826 # value_source default
9827 # Default value: 0 != CYGDBG_USE_ASSERTS
9828 # CYGDBG_USE_ASSERTS == 0
9830 # Requires: CYGDBG_USE_ASSERTS
9831 # CYGDBG_USE_ASSERTS == 0
9836 # With this option enabled, this allocator will be
9837 # made thread-safe. Additionally allocation functions
9838 # are made available that allow a thread to wait
9839 # until memory is available.
9841 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9842 # This option is not active
9843 # ActiveIf constraint: CYGPKG_KERNEL
9844 # CYGPKG_KERNEL (unknown) == 0
9848 # No user value, uncomment the following line to provide one.
9850 # value_source default
9852 # Requires: CYGPKG_KERNEL
9853 # CYGPKG_KERNEL (unknown) == 0
9857 # Support more than one instance
9858 # Having this option disabled allows important
9859 # implementation structures to be declared as a single
9860 # static instance, allowing faster access. However this
9861 # would fail if there is more than one instance of
9862 # the dlmalloc allocator class. Therefore this option can
9863 # be enabled if multiple instances are required. Note: as
9864 # a special case, if this allocator is used as the
9865 # implementation of malloc, and it can be determined there
9866 # is more than one malloc pool, then this option will be
9869 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9871 # No user value, uncomment the following line to provide one.
9873 # value_source default
9877 # Use system memmove() and memset()
9878 # This may be used to control whether memset() and memmove()
9879 # are used within the implementation. The alternative is
9880 # to use some macro equivalents, which some people report
9881 # are faster in some circumstances.
9883 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9885 # No user value, uncomment the following line to provide one.
9887 # value_source default
9888 # Default value: 0 != CYGPKG_ISOINFRA
9889 # CYGPKG_ISOINFRA == current
9891 # Requires: CYGPKG_ISOINFRA
9892 # CYGPKG_ISOINFRA == current
9896 # Minimum alignment of allocated blocks
9897 # This option controls the minimum alignment that the
9898 # allocated memory blocks are aligned on, specified as
9899 # 2^N. Note that using large mininum alignments can lead
9900 # to excessive memory wastage.
9902 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9904 # No user value, uncomment the following line to provide one.
9906 # value_source default
9908 # Legal values: 3 to 10
9912 # Variable block allocator with separate metadata
9913 # This component contains configuration options related to the
9914 # variable block memory allocator with separate metadata.
9916 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9917 # There is no associated value.
9922 # With this option enabled, this allocator will be
9923 # made thread-safe. Additionally allocation functions
9924 # are made available that allow a thread to wait
9925 # until memory is available.
9927 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9928 # This option is not active
9929 # ActiveIf constraint: CYGPKG_KERNEL
9930 # CYGPKG_KERNEL (unknown) == 0
9934 # No user value, uncomment the following line to provide one.
9936 # value_source default
9942 # Kernel C API support for memory allocation
9943 # This option must be enabled to provide the extensions required
9944 # to support integration into the kernel C API.
9946 cdl_option CYGFUN_MEMALLOC_KAPI {
9947 # This option is not active
9948 # ActiveIf constraint: CYGPKG_KERNEL
9949 # CYGPKG_KERNEL (unknown) == 0
9953 # No user value, uncomment the following line to provide one.
9955 # value_source default
9956 # Default value: CYGFUN_KERNEL_API_C
9957 # CYGFUN_KERNEL_API_C (unknown) == 0
9961 # malloc(0) returns NULL
9962 # This option controls the behavior of malloc(0) ( or calloc with
9963 # either argument 0 ). It is permitted by the standard to return
9964 # either a NULL pointer or a unique pointer. Enabling this option
9965 # forces a NULL pointer to be returned.
9967 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9969 # No user value, uncomment the following line to provide one.
9971 # value_source default
9975 # Breakpoint site when running out of memory
9976 # Whenever the system runs out of memory, it invokes this function
9977 # before either going to sleep waiting for memory to become
9978 # available or returning failure.
9980 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9982 # No user value, uncomment the following line to provide one.
9984 # value_source default
9988 # malloc() and supporting allocators
9989 # This component enables support for dynamic memory
9990 # allocation as supplied by the functions malloc(),
9991 # free(), calloc() and realloc(). As these
9992 # functions are often used, but can have quite an
9993 # overhead, disabling them here can ensure they
9994 # cannot even be used accidentally when static
9995 # allocation is preferred. Within this component are
9996 # various allocators that can be selected for use
9997 # as the underlying implementation of the dynamic
9998 # allocation functions.
10000 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10001 # ActiveIf constraint: CYGPKG_ISOINFRA
10002 # CYGPKG_ISOINFRA == current
10006 # No user value, uncomment the following line to provide one.
10008 # value_source default
10013 # Use external heap definition
10014 # This option allows other components in the
10015 # system to override the default system
10016 # provision of heap memory pools. This should
10017 # be set to a header which provides the equivalent
10018 # definitions to <pkgconf/heaps.hxx>.
10020 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10022 # No user value, uncomment the following line to provide one.
10024 # value_source default
10025 # Default value: 0 0
10028 # Use external implementation of joining multiple heaps
10029 # The default implementation of joining multiple heaps
10030 # is fine for the case where there are multiple disjoint
10031 # memory regions of the same type. However, in a system
10032 # there might be e.g. a small amount of internal SRAM and
10033 # a large amount of external DRAM. The SRAM is faster and
10034 # the DRAM is slower. An application can implement some
10035 # heuristic to choose which pool to allocate from. This
10036 # heuristic can be highly application specific.
10038 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10040 # No user value, uncomment the following line to provide one.
10042 # value_source default
10043 # Default value: 0 0
10046 # malloc() allocator implementations
10048 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10049 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10050 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10051 # This value cannot be modified here.
10054 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10055 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10058 # The following properties are affected by this value
10059 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10060 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10063 # malloc() implementation instantiation data
10064 # Memory allocator implementations that are capable of being
10065 # used underneath malloc() must be instantiated. The code
10066 # to do this is set in this option. It is only intended to
10067 # be set by the implementation, not the user.
10069 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10071 # No user value, uncomment the following line to provide one.
10072 # user_value <cyg/memalloc/dlmalloc.hxx>
10073 # value_source default
10074 # Default value: <cyg/memalloc/dlmalloc.hxx>
10076 # The following properties are affected by this value
10077 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10078 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10079 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10080 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10083 # Simple variable block implementation
10084 # This causes malloc() to use the simple
10085 # variable block allocator.
10087 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10089 # No user value, uncomment the following line to provide one.
10091 # value_source default
10093 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10094 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10096 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10097 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10101 # Doug Lea's malloc implementation
10102 # This causes malloc() to use a version of Doug Lea's
10103 # malloc (dlmalloc) as the underlying implementation.
10105 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10107 # No user value, uncomment the following line to provide one.
10109 # value_source default
10111 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10112 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10117 # Size of the fallback dynamic memory pool in bytes
10118 # If *no* heaps are configured in your memory layout,
10119 # dynamic memory allocation by
10120 # malloc() and calloc() must be from a fixed-size,
10121 # contiguous memory pool (note here that it is the
10122 # pool that is of a fixed size, but malloc() is still
10123 # able to allocate variable sized chunks of memory
10124 # from it). This option is the size
10125 # of that pool, in bytes. Note that not all of
10126 # this is available for programs to
10127 # use - some is needed for internal information
10128 # about memory regions, and some may be lost to
10129 # ensure that memory allocation only returns
10130 # memory aligned on word (or double word)
10131 # boundaries - a very common architecture
10134 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10136 # No user value, uncomment the following line to provide one.
10138 # value_source default
10139 # Default value: 16384
10140 # Legal values: 32 to 0x7fffffff
10143 # Common memory allocator package build options
10144 # Package specific build options including control over
10145 # compiler flags used only in building this package,
10146 # and details of which tests are built.
10148 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10149 # There is no associated value.
10153 # Additional compiler flags
10154 # This option modifies the set of compiler flags for
10155 # building this package. These flags are used in addition
10156 # to the set of global flags.
10158 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10160 # No user value, uncomment the following line to provide one.
10161 # user_value "-fno-rtti -Woverloaded-virtual"
10162 # value_source default
10163 # Default value: "-fno-rtti -Woverloaded-virtual"
10166 # Suppressed compiler flags
10167 # This option modifies the set of compiler flags for
10168 # building this package. These flags are removed from
10169 # the set of global flags if present.
10171 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10173 # No user value, uncomment the following line to provide one.
10174 # user_value -Wno-pointer-sign
10175 # value_source default
10176 # Default value: -Wno-pointer-sign
10180 # This option specifies the set of tests for this package.
10182 cdl_option CYGPKG_MEMALLOC_TESTS {
10183 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10185 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10190 # Common error code support
10191 # This package contains the common list of error and
10192 # status codes. It is held centrally to allow
10193 # packages to interchange error codes and status
10194 # codes in a common way, rather than each package
10195 # having its own conventions for error/status
10196 # reporting. The error codes are modelled on the
10197 # POSIX style naming e.g. EINVAL etc. This package
10198 # also provides the standard strerror() function to
10199 # convert error codes to textual representation, as
10200 # well as an implementation of the errno idiom.
10202 cdl_package CYGPKG_ERROR {
10203 # Packages cannot be added or removed, nor can their version be changed,
10204 # simply by editing their value. Instead the appropriate configuration
10205 # should be used to perform these actions.
10207 # This value cannot be modified here.
10209 # Current value: 1 current
10210 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10211 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10217 # This package controls the behaviour of the
10218 # errno variable (or more strictly, expression)
10221 cdl_component CYGPKG_ERROR_ERRNO {
10223 # No user value, uncomment the following line to provide one.
10225 # value_source default
10227 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10228 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10234 # This option controls whether the standard error
10235 # code reporting variable errno is a per-thread
10236 # variable, rather than global.
10238 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10240 # No user value, uncomment the following line to provide one.
10242 # The inferred value should not be edited directly.
10244 # value_source inferred
10246 # Requires: CYGVAR_KERNEL_THREADS_DATA
10247 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10252 # Trace verbosity level for debugging the errno
10253 # retrieval mechanism in errno.cxx. Increase this
10254 # value to get additional trace output.
10256 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10258 # No user value, uncomment the following line to provide one.
10260 # value_source default
10262 # Legal values: 0 to 1
10266 # strerror function
10267 # This package controls the presence and behaviour of the
10268 # strerror() function from <string.h>
10270 cdl_option CYGPKG_ERROR_STRERROR {
10272 # No user value, uncomment the following line to provide one.
10274 # value_source default
10276 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10277 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10281 # Error package build options
10282 # Package specific build options including control over
10283 # compiler flags used only in building this package,
10284 # and details of which tests are built.
10286 cdl_component CYGPKG_ERROR_OPTIONS {
10287 # There is no associated value.
10291 # Additional compiler flags
10292 # This option modifies the set of compiler flags for
10293 # building the error package. These flags are used in addition
10294 # to the set of global flags.
10296 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10298 # No user value, uncomment the following line to provide one.
10300 # value_source default
10301 # Default value: ""
10304 # Suppressed compiler flags
10305 # This option modifies the set of compiler flags for
10306 # building the error package. These flags are removed from
10307 # the set of global flags if present.
10309 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10311 # No user value, uncomment the following line to provide one.
10313 # value_source default
10314 # Default value: ""
10319 # I2C driver for FSL MXC-based platforms
10321 cdl_package CYGPKG_DEVS_MXC_I2C {
10322 # Packages cannot be added or removed, nor can their version be changed,
10323 # simply by editing their value. Instead the appropriate configuration
10324 # should be used to perform these actions.
10326 # This value cannot be modified here.
10328 # Current value: 1 current
10331 # ipu driver for mxc
10333 cdl_package CYGPKG_DEVS_IMX_IPU {
10334 # Packages cannot be added or removed, nor can their version be changed,
10335 # simply by editing their value. Instead the appropriate configuration
10336 # should be used to perform these actions.
10338 # This value cannot be modified here.
10340 # Current value: 1 current
10342 # The following properties are affected by this value
10343 # option CYGHWR_MX51_LCD_LOGO
10344 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10348 # IPU version 3EX support
10349 # When this option is enabled, it indicates the IPU version
10352 cdl_option CYGHWR_DEVS_IPU_3_EX {
10354 # No user value, uncomment the following line to provide one.
10356 # The inferred value should not be edited directly.
10358 # value_source inferred
10362 # IPU version 3D support
10363 # When this option is enabled, it indicates the IPU version
10366 cdl_option CYGHWR_DEVS_IPU_3_D {
10368 # No user value, uncomment the following line to provide one.
10370 # value_source default