1 # eCos saved configuration
3 # ---- commands --------------------------------------------------------
4 # This section contains information about the savefile format.
5 # It should not be edited. Any modifications made to this section
6 # may make it impossible for the configuration tools to read
9 cdl_savefile_version 1;
10 cdl_savefile_command cdl_savefile_version {};
11 cdl_savefile_command cdl_savefile_command {};
12 cdl_savefile_command cdl_configuration { description hardware template package };
13 cdl_savefile_command cdl_package { value_source user_value wizard_value inferred_value };
14 cdl_savefile_command cdl_component { value_source user_value wizard_value inferred_value };
15 cdl_savefile_command cdl_option { value_source user_value wizard_value inferred_value };
16 cdl_savefile_command cdl_interface { value_source user_value wizard_value inferred_value };
18 # ---- toplevel --------------------------------------------------------
19 # This section defines the toplevel configuration object. The only
20 # values that can be changed are the name of the configuration and
21 # the description field. It is not possible to modify the target,
22 # the template or the set of packages simply by editing the lines
23 # below because these changes have wide-ranging effects. Instead
24 # the appropriate tools should be used to make such modifications.
26 cdl_configuration eCos {
29 # These fields should not be modified.
32 package -hardware CYGPKG_HAL_ARM current ;
33 package -hardware CYGPKG_HAL_ARM_MX53 current ;
34 package -hardware CYGPKG_HAL_ARM_TX53KARO current ;
35 package -template CYGPKG_HAL current ;
36 package -template CYGPKG_INFRA current ;
37 package -template CYGPKG_REDBOOT current ;
38 package -template CYGPKG_ISOINFRA current ;
39 package -template CYGPKG_LIBC_STRING current ;
40 package -template CYGPKG_CRC current ;
41 package -hardware CYGPKG_IO_ETH_DRIVERS current ;
42 package -hardware CYGPKG_DEVS_ETH_ARM_TX53 current ;
43 package -hardware CYGPKG_DEVS_ETH_FEC current ;
44 package -hardware CYGPKG_COMPRESS_ZLIB current ;
45 package -hardware CYGPKG_IO_FLASH current ;
46 package -hardware CYGPKG_DEVS_FLASH_ONMXC current ;
47 package -template CYGPKG_MEMALLOC current ;
48 package -template CYGPKG_DEVS_ETH_PHY current ;
49 package -template CYGPKG_LIBC_I18N current ;
50 package -template CYGPKG_LIBC_STDLIB current ;
51 package -template CYGPKG_ERROR current ;
52 package -hardware CYGPKG_DEVS_MXC_I2C current ;
53 package -hardware CYGPKG_DEVS_IMX_IPU current ;
56 # ---- conflicts -------------------------------------------------------
57 # There are no conflicts.
59 # ---- contents --------------------------------------------------------
62 # Global build options
63 # Global build options including control over
64 # compiler flags, linker flags and choice of toolchain.
66 cdl_component CYGBLD_GLOBAL_OPTIONS {
67 # There is no associated value.
69 # The following properties are affected by this value
73 # Global command prefix
74 # This option specifies the command prefix used when
75 # invoking the build tools.
77 cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
79 # No user value, uncomment the following line to provide one.
80 # user_value arm-cortexa8-linux-gnueabi
81 # value_source default
82 # Default value: "arm-cortexa8-linux-gnu" . (CYGBLD_ARM_EABI ? "eabi" : "")
83 # CYGBLD_ARM_EABI == 1
84 # --> arm-cortexa8-linux-gnueabi
87 # Global compiler flags
88 # This option controls the global compiler flags which are used to
89 # compile all packages by default. Individual packages may define
90 # options which override these global flags.
92 cdl_option CYGBLD_GLOBAL_CFLAGS {
94 # No user value, uncomment the following line to provide one.
95 # user_value "-mabi=aapcs-linux -msoft-float -march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
96 # value_source default
97 # Default value: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
99 # CYGBLD_ARM_ENABLE_THUMB_INTERWORK == 0
100 # CYGBLD_ARM_EABI == 1
101 # --> "-mabi=aapcs-linux -msoft-float -march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
102 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
103 # CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS == 1
106 # The following properties are affected by this value
107 # option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
108 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
109 # option CYGBLD_INFRA_CFLAGS_PIPE
110 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
113 # Global linker flags
114 # This option controls the global linker flags. Individual
115 # packages may define options which override these global flags.
117 cdl_option CYGBLD_GLOBAL_LDFLAGS {
119 # No user value, uncomment the following line to provide one.
120 # user_value "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
121 # value_source default
122 # Default value: "-Wl,--gc-sections -Wl,-static -O2 -nostdlib"
125 # Build common GDB stub ROM image
126 # Unless a target board has specific requirements to the
127 # stub implementation, it can use a simple common stub.
128 # This option, which gets enabled by platform HALs as
129 # appropriate, controls the building of the common stub.
131 cdl_option CYGBLD_BUILD_COMMON_GDB_STUBS {
133 # No user value, uncomment the following line to provide one.
135 # value_source default
137 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
138 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
143 # ISO C library string functions
145 # This package provides string functions specified by the
146 # ISO C standard - ISO/IEC 9899:1990.
148 cdl_package CYGPKG_LIBC_STRING {
149 # Packages cannot be added or removed, nor can their version be changed,
150 # simply by editing their value. Instead the appropriate configuration
151 # should be used to perform these actions.
153 # This value cannot be modified here.
155 # Current value: 1 current
156 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
157 # CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == <cyg/libc/string/string.h>
159 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
160 # CYGBLD_ISO_STRING_MEMFUNCS_HEADER == <cyg/libc/string/string.h>
162 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
163 # CYGBLD_ISO_STRING_STRFUNCS_HEADER == <cyg/libc/string/string.h>
165 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
166 # CYGBLD_ISO_STRTOK_R_HEADER == <cyg/libc/string/string.h>
168 # Requires: CYGPKG_ISOINFRA
169 # CYGPKG_ISOINFRA == current
174 # Inline versions of <string.h> functions
175 # This option chooses whether some of the
176 # particularly simple string functions from
177 # <string.h> are available as inline
178 # functions. This may improve performance, and as
179 # the functions are small, may even improve code
182 cdl_option CYGIMP_LIBC_STRING_INLINES {
184 # No user value, uncomment the following line to provide one.
186 # value_source default
190 # Optimize string functions for code size
191 # This option tries to reduce string function
192 # code size at the expense of execution speed. The
193 # same effect can be produced if the code is
194 # compiled with the -Os option to the compiler.
196 cdl_option CYGIMP_LIBC_STRING_PREFER_SMALL_TO_FAST {
198 # No user value, uncomment the following line to provide one.
200 # value_source default
204 # Provide BSD compatibility functions
205 # Enabling this option causes various compatibility functions
206 # commonly found in the BSD UNIX operating system to be included.
207 # These are functions such as bzero, bcmp, bcopy, bzero, strcasecmp,
208 # strncasecmp, index, rindex and swab.
210 cdl_option CYGFUN_LIBC_STRING_BSD_FUNCS {
212 # No user value, uncomment the following line to provide one.
214 # The inferred value should not be edited directly.
216 # value_source inferred
218 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
219 # CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == <cyg/libc/string/bsdstring.h>
221 # Requires: CYGINT_ISO_CTYPE
222 # CYGINT_ISO_CTYPE == 1
227 # These options control the behaviour of the
228 # strtok() and strtok_r() string tokenization
231 cdl_component CYGPKG_LIBC_STRING_STRTOK {
232 # There is no associated value.
236 # Per-thread strtok()
237 # This option controls whether the string function
238 # strtok() has its state recorded on a per-thread
239 # basis rather than global. If this option is
240 # disabled, some per-thread space can be saved.
241 # Note there is also a POSIX-standard strtok_r()
242 # function to achieve a similar effect with user
243 # support. Enabling this option will use one slot
244 # of kernel per-thread data. You should ensure you
245 # have enough slots configured for all your
248 cdl_option CYGSEM_LIBC_STRING_PER_THREAD_STRTOK {
249 # This option is not active
250 # ActiveIf constraint: CYGPKG_KERNEL
251 # CYGPKG_KERNEL (unknown) == 0
255 # No user value, uncomment the following line to provide one.
257 # value_source default
258 # Default value: CYGVAR_KERNEL_THREADS_DATA
259 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
261 # Requires: CYGVAR_KERNEL_THREADS_DATA
262 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
267 # Trace verbosity level for debugging the <string.h>
268 # functions strtok() and strtok_r(). Increase this
269 # value to get additional trace output.
271 cdl_option CYGNUM_LIBC_STRING_STRTOK_TRACE_LEVEL {
273 # No user value, uncomment the following line to provide one.
275 # value_source default
277 # Legal values: 0 to 1
282 # This option indicates whether strdup() is to be supported.
284 cdl_option CYGFUN_LIBC_STRING_STRDUP {
285 # ActiveIf constraint: CYGINT_ISO_MALLOC
286 # CYGINT_ISO_MALLOC == 1
289 # Calculated value: 1
294 # C library string functions build options
295 # Package specific build options including control over
296 # compiler flags used only in building this package,
297 # and details of which tests are built.
299 cdl_component CYGPKG_LIBC_STRING_OPTIONS {
300 # There is no associated value.
304 # Additional compiler flags
305 # This option modifies the set of compiler flags for
306 # building the C library. These flags are used in addition
307 # to the set of global flags.
309 cdl_option CYGPKG_LIBC_STRING_CFLAGS_ADD {
311 # No user value, uncomment the following line to provide one.
312 # user_value "-fno-rtti -Woverloaded-virtual"
313 # value_source default
314 # Default value: "-fno-rtti -Woverloaded-virtual"
317 # Suppressed compiler flags
318 # This option modifies the set of compiler flags for
319 # building the C library. These flags are removed from
320 # the set of global flags if present.
322 cdl_option CYGPKG_LIBC_STRING_CFLAGS_REMOVE {
324 # No user value, uncomment the following line to provide one.
325 # user_value -Wno-pointer-sign
326 # value_source default
327 # Default value: -Wno-pointer-sign
330 # C library string function tests
331 # This option specifies the set of tests for the C library
334 cdl_option CYGPKG_LIBC_STRING_TESTS {
335 # Calculated value: "tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2"
337 # Current_value: tests/memchr tests/memcmp1 tests/memcmp2 tests/memcpy1 tests/memcpy2 tests/memmove1 tests/memmove2 tests/memset tests/strcat1 tests/strcat2 tests/strchr tests/strcmp1 tests/strcmp2 tests/strcoll1 tests/strcoll2 tests/strcpy1 tests/strcpy2 tests/strcspn tests/strcspn tests/strlen tests/strncat1 tests/strncat2 tests/strncpy1 tests/strncpy2 tests/strpbrk tests/strrchr tests/strspn tests/strstr tests/strtok tests/strxfrm1 tests/strxfrm2
342 # Common ethernet support
343 # doc: ref/io-eth-drv-generic.html
344 # Platform independent ethernet drivers
346 cdl_package CYGPKG_IO_ETH_DRIVERS {
347 # Packages cannot be added or removed, nor can their version be changed,
348 # simply by editing their value. Instead the appropriate configuration
349 # should be used to perform these actions.
351 # This value cannot be modified here.
353 # Current value: 1 current
355 # The following properties are affected by this value
356 # component CYGPKG_REDBOOT_NETWORKING
357 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
358 # package CYGPKG_DEVS_ETH_ARM_TX53
359 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
360 # package CYGPKG_DEVS_ETH_FEC
361 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
362 # package CYGPKG_DEVS_ETH_PHY
363 # ActiveIf: CYGPKG_IO_ETH_DRIVERS
369 cdl_interface CYGHWR_NET_DRIVERS {
370 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
371 # This value cannot be modified here.
375 # The following properties are affected by this value
376 # option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE
377 # ActiveIf: CYGHWR_NET_DRIVERS > 1
378 # option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE
379 # ActiveIf: CYGHWR_NET_DRIVERS > 1
382 # Driver supports multicast addressing
383 # This interface defines whether or not a driver can handle
384 # requests for multicast addressing.
386 cdl_interface CYGINT_IO_ETH_MULTICAST {
387 # Implemented by CYGPKG_DEVS_ETH_FEC, active, enabled
388 # This value cannot be modified here.
392 # The following properties are affected by this value
395 # Support printing driver debug information
396 # Selecting this option will include code to allow the driver to
397 # print lots of information on diagnostic output such as full
400 cdl_component CYGDBG_IO_ETH_DRIVERS_DEBUG {
402 # No user value, uncomment the following line to provide one.
404 # value_source default
409 # Driver debug output verbosity
410 # The value of this option indicates the default verbosity
411 # level of debugging output. 0 means no debugging output
412 # is made by default. Higher values indicate higher verbosity.
413 # The verbosity level may also be changed at run time by
414 # changing the variable cyg_io_eth_net_debug.
416 cdl_option CYGDBG_IO_ETH_DRIVERS_DEBUG_VERBOSITY {
418 # No user value, uncomment the following line to provide one.
420 # value_source default
425 # Size of scatter-gather I/O lists
426 # A scatter-gather list is used to pass requests to/from
427 # the physical device driver. This list can typically be
428 # small, as the data is normally already packed into reasonable
431 cdl_option CYGNUM_IO_ETH_DRIVERS_SG_LIST_SIZE {
433 # No user value, uncomment the following line to provide one.
435 # value_source default
439 # Support for standard eCos TCP/IP stack.
441 cdl_component CYGPKG_IO_ETH_DRIVERS_NET {
442 # This option is not active
443 # ActiveIf constraint: CYGPKG_NET
444 # CYGPKG_NET (unknown) == 0
448 # No user value, uncomment the following line to provide one.
450 # value_source default
452 # Requires: CYGINT_ISO_STRING_STRFUNCS
453 # CYGINT_ISO_STRING_STRFUNCS == 1
458 # Warn when there are no more mbufs
459 # Warnings about running out of mbufs are printed to the
460 # diagnostic output channel via diag_printf() if this option
461 # is enabled. Mbufs are the network stack's basic dynamic
462 # memory objects that hold all packets in transit; running
463 # out is bad for performance but not fatal, not a crash.
464 # You might want to turn off the warnings to preserve realtime
465 # properties of the system even in extremis.
467 cdl_component CYGPKG_IO_ETH_DRIVERS_WARN_NO_MBUFS {
468 # This option is not active
469 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
472 # No user value, uncomment the following line to provide one.
474 # value_source default
478 # Simulate network failures for testing
479 # This package contains a suite of simulated failure modes
480 # for the ethernet device layer, including dropping and/or
481 # corrupting received packets, dropping packets queued for
482 # transmission, and simulating a complete network break.
483 # It requires the kernel as a source of time information.
485 cdl_component CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES {
486 # This option is not active
487 # The parent CYGPKG_IO_ETH_DRIVERS_NET is not active
490 # No user value, uncomment the following line to provide one.
492 # value_source default
497 # Drop incoming packets (percentage)
499 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_RX {
500 # This option is not active
501 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
502 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
505 # No user value, uncomment the following line to provide one.
507 # value_source default
508 # Default value: 1 10
509 # Legal values: 10 50 80
512 # Corrupt incoming packets (percentage)
514 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_CORRUPT_RX {
515 # This option is not active
516 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
517 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
520 # No user value, uncomment the following line to provide one.
522 # value_source default
523 # Default value: 1 10
524 # Legal values: 10 50 80
527 # Drop outgoing packets (percentage)
529 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_DROP_TX {
530 # This option is not active
531 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
532 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
535 # No user value, uncomment the following line to provide one.
537 # value_source default
538 # Default value: 1 10
539 # Legal values: 10 50 80
542 # Simulate a line cut from time to time
543 # This option causes the system to drop all packets for a
544 # short random period (10s of seconds), and then act
545 # normally for up to 4 times that long. This simulates your
546 # sysadmin fiddling with plugs in the network switch
549 cdl_option CYGPKG_IO_ETH_DRIVERS_SIMULATE_LINE_CUT {
550 # This option is not active
551 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is not active
552 # The parent CYGPKG_IO_ETH_DRIVERS_SIMULATED_FAILURES is disabled
555 # No user value, uncomment the following line to provide one.
557 # value_source default
563 # Support for stand-alone network stack.
565 cdl_component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE {
566 # ActiveIf constraint: !CYGPKG_NET
567 # CYGPKG_NET (unknown) == 0
571 # No user value, uncomment the following line to provide one.
573 # value_source default
575 # Requires: CYGINT_ISO_STRING_MEMFUNCS
576 # CYGINT_ISO_STRING_MEMFUNCS == 1
581 # Pass packets to an alternate stack
582 # Define this to allow packets seen by this layer to be
583 # passed on to the previous logical layer, i.e. when
584 # stand-alone processing replaces system (eCos) processing.
586 cdl_option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS {
588 # No user value, uncomment the following line to provide one.
590 # value_source default
591 # Default value: 0 != CYGPKG_REDBOOT_NETWORKING
592 # CYGPKG_REDBOOT_NETWORKING == 1
596 # Number of [network] buffers
597 # This option is used to allocate space to buffer incoming network
598 # packets. These buffers are used to hold data until they can be
599 # logically processed by higher layers.
601 cdl_option CYGNUM_IO_ETH_DRIVERS_NUM_PKT {
603 # No user value, uncomment the following line to provide one.
605 # value_source default
607 # Legal values: 2 to 32
610 # Show driver warnings
611 # Selecting this option will allows the stand-alone ethernet driver
612 # to display warnings on the system console when incoming network
613 # packets are being discarded due to lack of buffer space.
615 cdl_option CYGSEM_IO_ETH_DRIVERS_WARN {
616 # ActiveIf constraint: CYGPKG_REDBOOT
617 # CYGPKG_REDBOOT == current
621 # No user value, uncomment the following line to provide one.
623 # value_source default
628 # Support for lwIP network stack.
630 cdl_component CYGPKG_IO_ETH_DRIVERS_LWIP {
631 # This option is not active
632 # ActiveIf constraint: CYGPKG_NET_LWIP
633 # CYGPKG_NET_LWIP (unknown) == 0
637 # No user value, uncomment the following line to provide one.
639 # value_source default
641 # Requires: !CYGPKG_NET
642 # CYGPKG_NET (unknown) == 0
646 # Interrupt support required
647 # This interface is used to indicate to the low
648 # level device drivers that interrupt driven operation
649 # is required by higher layers.
651 cdl_interface CYGINT_IO_ETH_INT_SUPPORT_REQUIRED {
652 # Implemented by CYGPKG_IO_ETH_DRIVERS_NET, inactive, enabled
653 # Implemented by CYGPKG_IO_ETH_DRIVERS_LWIP, inactive, enabled
654 # This value cannot be modified here.
658 # The following properties are affected by this value
661 # Common ethernet support build options
663 cdl_component CYGPKG_IO_ETH_DRIVERS_OPTIONS {
664 # There is no associated value.
668 # Additional compiler flags
669 # This option modifies the set of compiler flags for
670 # building the common ethernet support package. These flags are used in addition
671 # to the set of global flags.
673 cdl_option CYGPKG_IO_ETH_DRIVERS_CFLAGS_ADD {
675 # No user value, uncomment the following line to provide one.
676 # user_value "-D_KERNEL -D__ECOS"
677 # value_source default
678 # Default value: "-D_KERNEL -D__ECOS"
682 # Ethernet driver for Ka-Ro electronics TX53 processor module
684 cdl_package CYGPKG_DEVS_ETH_ARM_TX53 {
685 # Packages cannot be added or removed, nor can their version be changed,
686 # simply by editing their value. Instead the appropriate configuration
687 # should be used to perform these actions.
689 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
690 # CYGPKG_IO_ETH_DRIVERS == current
693 # This value cannot be modified here.
695 # Current value: 1 current
699 # FEC ethernet driver required
701 cdl_interface CYGINT_DEVS_ETH_FEC_REQUIRED {
702 # Implemented by CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0, active, enabled
703 # This value cannot be modified here.
707 # The following properties are affected by this value
708 # package CYGPKG_DEVS_ETH_FEC
709 # ActiveIf: CYGINT_DEVS_ETH_FEC_REQUIRED
712 # Ka-Ro TX53 ethernet port driver
713 # This option includes the ethernet device driver for the
716 cdl_component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0 {
718 # No user value, uncomment the following line to provide one.
720 # value_source default
722 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
723 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
725 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
726 # CYGHWR_DEVS_ETH_PHY_LAN8700 == 1
731 # Device name for the ETH0 ethernet driver
732 # This option sets the name of the ethernet device.
734 cdl_option CYGDAT_DEVS_ETH_ARM_MXCBOARD_ETH0_NAME {
736 # No user value, uncomment the following line to provide one.
737 # user_value "\"eth0\""
738 # value_source default
739 # Default value: "\"eth0\""
742 # OUI part of MAC address
743 # This option sets OUI part (manufacturer ID) of the MAC address
746 cdl_option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI {
747 # ActiveIf constraint: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
748 # CYGSEM_REDBOOT_PLF_ESA_VALIDATE == 1
752 # No user value, uncomment the following line to provide one.
753 # user_value "{ 0x00, 0x0c, 0xc6 }"
754 # value_source default
755 # Default value: "{ 0x00, 0x0c, 0xc6 }"
760 # Driver for fast ethernet controller.
761 # Driver for fast ethernet controller.
763 cdl_package CYGPKG_DEVS_ETH_FEC {
764 # Packages cannot be added or removed, nor can their version be changed,
765 # simply by editing their value. Instead the appropriate configuration
766 # should be used to perform these actions.
768 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
769 # CYGPKG_IO_ETH_DRIVERS == current
771 # ActiveIf constraint: CYGINT_DEVS_ETH_FEC_REQUIRED
772 # CYGINT_DEVS_ETH_FEC_REQUIRED == 1
775 # This value cannot be modified here.
777 # Current value: 1 current
781 # MXC FEC ethernet driver build options
783 cdl_component CYGPKG_DEVS_ETH_FEC_OPTIONS {
784 # There is no associated value.
788 # Additional compiler flags
789 # This option modifies the set of compiler flags for
790 # building the Cirrus Logic ethernet driver package.
791 # These flags are used in addition
792 # to the set of global flags.
794 cdl_option CYGPKG_DEVS_ETH_FEC_CFLAGS_ADD {
796 # No user value, uncomment the following line to provide one.
797 # user_value "-D_KERNEL -D__ECOS"
798 # value_source default
799 # Default value: "-D_KERNEL -D__ECOS"
803 # MXC FEC MII Gasket for RMII mode
804 # This option enables the use of the MII Gasket for
805 # RMII mode found in i.MX25 and i.MX53 processors.
807 cdl_option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK {
808 # ActiveIf constraint: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
809 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
810 # CYGPKG_HAL_ARM_MX53 == current
814 # No user value, uncomment the following line to provide one.
816 # value_source default
821 # Ethernet transceiver (PHY) support
822 # API for ethernet PHY devices
824 cdl_package CYGPKG_DEVS_ETH_PHY {
825 # Packages cannot be added or removed, nor can their version be changed,
826 # simply by editing their value. Instead the appropriate configuration
827 # should be used to perform these actions.
829 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
830 # CYGPKG_IO_ETH_DRIVERS == current
833 # This value cannot be modified here.
835 # Current value: 1 current
836 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
837 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
842 # Enable driver debugging
843 # Enables the diagnostic debug messages on the
846 cdl_option CYGDBG_DEVS_ETH_PHY {
848 # No user value, uncomment the following line to provide one.
850 # value_source default
854 # Time period (seconds) to wait for auto-negotiation
855 # The length of time to wait for auto-negotiation to complete
856 # before giving up and declaring the link dead/missing.
858 cdl_option CYGINT_DEVS_ETH_PHY_AUTO_NEGOTIATION_TIME {
860 # No user value, uncomment the following line to provide one.
862 # value_source default
867 # Include support for National Semiconductor DP83847 DsPHYTER II
869 cdl_option CYGHWR_DEVS_ETH_PHY_DP83847 {
871 # No user value, uncomment the following line to provide one.
873 # value_source default
878 # Include support for AMD 79C874 NetPHY
880 cdl_option CYGHWR_DEVS_ETH_PHY_AM79C874 {
882 # No user value, uncomment the following line to provide one.
884 # value_source default
889 # Include support for Intel LXT972xxx PHY
891 cdl_option CYGHWR_DEVS_ETH_PHY_INLXT972 {
893 # No user value, uncomment the following line to provide one.
895 # value_source default
900 # Include support for ICS 1890 PHY
902 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1890 {
904 # No user value, uncomment the following line to provide one.
906 # value_source default
911 # Include support for ICS 1892 PHY
913 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1892 {
915 # No user value, uncomment the following line to provide one.
917 # value_source default
922 # Include support for ICS 1893 and 1893AF PHY
924 cdl_option CYGHWR_DEVS_ETH_PHY_ICS1893 {
926 # No user value, uncomment the following line to provide one.
928 # value_source default
933 # Include support for the Davicom DM9161A PHY
935 cdl_option CYGHWR_DEVS_ETH_PHY_DM9161A {
937 # No user value, uncomment the following line to provide one.
939 # value_source default
944 # Include support for the Micrel KS8721 PHY
946 cdl_option CYGHWR_DEVS_ETH_PHY_KS8721 {
948 # No user value, uncomment the following line to provide one.
950 # value_source default
955 # Include support for SMSC LAN8700 NetPHY
957 cdl_option CYGHWR_DEVS_ETH_PHY_LAN8700 {
959 # No user value, uncomment the following line to provide one.
961 # The inferred value should not be edited directly.
963 # value_source inferred
966 # The following properties are affected by this value
967 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
968 # Requires: CYGHWR_DEVS_ETH_PHY_LAN8700
973 # ISO C library internationalization functions
975 # This package provides internationalization functions specified by the
976 # ISO C standard - ISO/IEC 9899:1990. These include locale-related
977 # functionality and <ctype.h> functionality.
979 cdl_package CYGPKG_LIBC_I18N {
980 # Packages cannot be added or removed, nor can their version be changed,
981 # simply by editing their value. Instead the appropriate configuration
982 # should be used to perform these actions.
984 # This value cannot be modified here.
986 # Current value: 1 current
987 # Requires: CYGPKG_ISOINFRA
988 # CYGPKG_ISOINFRA == current
994 # These options determine which locales other than the "C" locale
995 # are supported and hence contribute to the size of the executable.
997 cdl_component CYGPKG_LIBC_I18N_LOCALES {
998 # There is no associated value.
1002 # Support for multiple locales required
1004 cdl_interface CYGINT_LIBC_I18N_MB_REQUIRED {
1005 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_SJIS, active, disabled
1006 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_JIS, active, disabled
1007 # Implemented by CYGFUN_LIBC_I18N_LOCALE_C_EUCJP, active, disabled
1008 # This value cannot be modified here.
1010 # Current value: 0 0
1011 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
1012 # CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == 0
1015 # The following properties are affected by this value
1018 # C-SJIS locale support
1019 # This option controls if the "C-SJIS" locale will be
1020 # supported by setlocale(). The locale is a hybrid locale
1021 # that is mostly the "C" locale with Japanese SJIS multibyte
1024 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_SJIS {
1026 # No user value, uncomment the following line to provide one.
1028 # value_source default
1031 # The following properties are affected by this value
1032 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1033 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1034 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1035 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1038 # C-JIS locale support
1039 # This option controls if the "C-JIS" locale will be
1040 # supported by setlocale(). The locale is a hybrid locale
1041 # that is mostly the "C" locale with Japanese JIS multibyte
1044 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_JIS {
1046 # No user value, uncomment the following line to provide one.
1048 # value_source default
1051 # The following properties are affected by this value
1052 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1053 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1054 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1055 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1058 # C-EUCJP locale support
1059 # This option controls if the "C-EUCJP" locale will be
1060 # supported by setlocale(). The locale is a hybrid locale
1061 # that is mostly the "C" locale with Japanese EUCJP multibyte
1064 cdl_option CYGFUN_LIBC_I18N_LOCALE_C_EUCJP {
1066 # No user value, uncomment the following line to provide one.
1068 # value_source default
1071 # The following properties are affected by this value
1072 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1073 # LegalValues: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1074 # option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE
1075 # DefaultValue: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1079 # Newlib's ctype implementation
1080 # This option enables the implementation of the ctype functions
1081 # that comes with newlib. It is table driven and therefore
1082 # exhibits different performance characteristics. It also offers
1083 # a limited amount of binary compatibility
1084 # with newlib so that programs linked against newlib ctype/locale
1085 # do not need to be recompiled when linked with eCos.
1087 cdl_option CYGPKG_LIBC_I18N_NEWLIB_CTYPE {
1089 # No user value, uncomment the following line to provide one.
1091 # value_source default
1093 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
1094 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1098 # Per-thread multibyte state
1099 # This option controls whether the multibyte character
1100 # handling functions mblen(), mbtowc(), and wctomb(),
1101 # have their state recorded on a per-thread
1102 # basis rather than global. If this option is
1103 # disabled, some per-thread space can be saved.
1104 # Enabling this option will use three slots
1105 # of kernel per-thread data. You should ensure you
1106 # have enough slots configured for all your
1109 cdl_option CYGSEM_LIBC_I18N_PER_THREAD_MB {
1110 # This option is not active
1111 # ActiveIf constraint: CYGPKG_KERNEL
1112 # CYGPKG_KERNEL (unknown) == 0
1116 # No user value, uncomment the following line to provide one.
1118 # value_source default
1119 # Default value: CYGVAR_KERNEL_THREADS_DATA != 0
1120 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1122 # Requires: CYGVAR_KERNEL_THREADS_DATA
1123 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1127 # Size of locale name strings
1128 # This option controls the maximum size of
1129 # locale names and is used, among other things
1130 # to instantiate a static string used
1131 # as a return value from the
1132 # setlocale() function. When requesting the
1133 # current locale settings with LC_ALL, a string
1134 # must be constructed to contain this data, rather
1135 # than just returning a constant string. This
1136 # string data is stored in the static string.
1137 # This depends on the length of locale names,
1138 # hence this option. If just the C locale is
1139 # present, this option can be set as low as 2.
1141 cdl_option CYGNUM_LIBC_I18N_MAX_LOCALE_NAME_SIZE {
1143 # No user value, uncomment the following line to provide one.
1145 # value_source default
1146 # Default value: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2)))
1147 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1148 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1149 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1151 # Legal values: (CYGFUN_LIBC_I18N_LOCALE_C_EUCJP ? 8 : (CYGFUN_LIBC_I18N_LOCALE_C_SJIS ? 7 : (CYGFUN_LIBC_I18N_LOCALE_C_JIS ? 6 : 2))) to 0x7fffffff
1152 # CYGFUN_LIBC_I18N_LOCALE_C_EUCJP == 0
1153 # CYGFUN_LIBC_I18N_LOCALE_C_SJIS == 0
1154 # CYGFUN_LIBC_I18N_LOCALE_C_JIS == 0
1157 # Inline versions of <ctype.h> functions
1158 # This option chooses whether the simple character
1159 # classification and conversion functions (e.g.
1160 # isupper(), isalpha(), toupper(), etc.)
1161 # from <ctype.h> are available as inline
1162 # functions. This may improve performance and as
1163 # the functions are small, may even improve code
1166 cdl_option CYGIMP_LIBC_I18N_CTYPE_INLINES {
1168 # No user value, uncomment the following line to provide one.
1170 # value_source default
1172 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
1173 # CYGBLD_ISO_CTYPE_HEADER == <cyg/libc/i18n/ctype.inl>
1177 # C library i18n functions build options
1178 # Package specific build options including control over
1179 # compiler flags used only in building this package,
1180 # and details of which tests are built.
1182 cdl_component CYGPKG_LIBC_I18N_OPTIONS {
1183 # There is no associated value.
1187 # Additional compiler flags
1188 # This option modifies the set of compiler flags for
1189 # building the C library. These flags are used in addition
1190 # to the set of global flags.
1192 cdl_option CYGPKG_LIBC_I18N_CFLAGS_ADD {
1194 # No user value, uncomment the following line to provide one.
1195 # user_value "-fno-rtti -Woverloaded-virtual"
1196 # value_source default
1197 # Default value: "-fno-rtti -Woverloaded-virtual"
1200 # Suppressed compiler flags
1201 # This option modifies the set of compiler flags for
1202 # building the C library. These flags are removed from
1203 # the set of global flags if present.
1205 cdl_option CYGPKG_LIBC_I18N_CFLAGS_REMOVE {
1207 # No user value, uncomment the following line to provide one.
1208 # user_value -Wno-pointer-sign
1209 # value_source default
1210 # Default value: -Wno-pointer-sign
1213 # C library i18n function tests
1214 # This option specifies the set of tests for the C library
1217 cdl_option CYGPKG_LIBC_I18N_TESTS {
1218 # Calculated value: "tests/ctype tests/setlocale tests/i18nmb"
1220 # Current_value: tests/ctype tests/setlocale tests/i18nmb
1225 # ISO C library general utility functions
1226 # doc: ref/libc.html
1227 # This package provides general utility functions in <stdlib.h>
1228 # as specified by the ISO C standard - ISO/IEC 9899:1990.
1230 cdl_package CYGPKG_LIBC_STDLIB {
1231 # Packages cannot be added or removed, nor can their version be changed,
1232 # simply by editing their value. Instead the appropriate configuration
1233 # should be used to perform these actions.
1235 # This value cannot be modified here.
1237 # Current value: 1 current
1238 # Requires: CYGPKG_ISOINFRA
1239 # CYGPKG_ISOINFRA == current
1241 # Requires: CYGINT_ISO_CTYPE
1242 # CYGINT_ISO_CTYPE == 1
1244 # Requires: CYGINT_ISO_STRING_STRFUNCS
1245 # CYGINT_ISO_STRING_STRFUNCS == 1
1250 # Inline versions of <stdlib.h> functions
1251 # This option chooses whether some of the
1252 # particularly simple standard utility functions
1253 # from <stdlib.h> are available as inline
1254 # functions. This may improve performance, and as
1255 # the functions are small, may even improve code
1258 cdl_component CYGIMP_LIBC_STDLIB_INLINES {
1259 # There is no associated value.
1265 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ABS {
1267 # No user value, uncomment the following line to provide one.
1269 # value_source default
1271 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
1272 # CYGBLD_ISO_STDLIB_ABS_HEADER == <cyg/libc/stdlib/abs.inl>
1278 cdl_option CYGIMP_LIBC_STDLIB_INLINE_DIV {
1280 # No user value, uncomment the following line to provide one.
1282 # value_source default
1284 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
1285 # CYGBLD_ISO_STDLIB_DIV_HEADER == <cyg/libc/stdlib/div.inl>
1289 # atof() / atoi() / atol()
1291 cdl_option CYGIMP_LIBC_STDLIB_INLINE_ATOX {
1293 # No user value, uncomment the following line to provide one.
1295 # value_source default
1297 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
1298 # CYGBLD_ISO_STDLIB_STRCONV_HEADER == <cyg/libc/stdlib/atox.inl>
1303 # Random number generation
1304 # These options control the behaviour of the
1305 # functions rand(), srand() and rand_r()
1307 cdl_component CYGPKG_LIBC_RAND {
1308 # There is no associated value.
1312 # Per-thread random seed
1313 # doc: ref/libc-thread-safety.html
1314 # This option controls whether the pseudo-random
1315 # number generation functions rand() and srand()
1316 # have their state recorded on a per-thread
1317 # basis rather than global. If this option is
1318 # disabled, some per-thread space can be saved.
1319 # Note there is also a POSIX-standard rand_r()
1320 # function to achieve a similar effect with user
1321 # support. Enabling this option will use one slot
1322 # of kernel per-thread data. You should ensure you
1323 # have enough slots configured for all your
1326 cdl_option CYGSEM_LIBC_PER_THREAD_RAND {
1328 # No user value, uncomment the following line to provide one.
1330 # value_source default
1332 # Requires: CYGVAR_KERNEL_THREADS_DATA
1333 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
1337 # Random number seed
1338 # This selects the initial random number seed for
1339 # rand()'s pseudo-random number generator. For
1340 # strict ISO standard compliance, this should be 1,
1341 # as per section 7.10.2.2 of the standard.
1343 cdl_option CYGNUM_LIBC_RAND_SEED {
1345 # No user value, uncomment the following line to provide one.
1347 # value_source default
1349 # Legal values: 0 to 0x7fffffff
1353 # Trace verbosity level for debugging the rand(),
1354 # srand() and rand_r() functions. Increase this
1355 # value to get additional trace output.
1357 cdl_option CYGNUM_LIBC_RAND_TRACE_LEVEL {
1359 # No user value, uncomment the following line to provide one.
1361 # value_source default
1363 # Legal values: 0 to 1
1366 # Simplest implementation
1367 # This provides a very simple implementation of rand()
1368 # that does not perform well with randomness in the
1369 # lower significant bits. However it is exceptionally
1370 # fast. It uses the sample algorithm from the ISO C
1373 cdl_option CYGIMP_LIBC_RAND_SIMPLEST {
1375 # No user value, uncomment the following line to provide one.
1377 # value_source default
1381 # Simple implementation #1
1382 # This provides a very simple implementation of rand()
1383 # based on the simplest implementation above. However
1384 # it does try to work around the lack of randomness
1385 # in the lower significant bits, at the expense of a
1388 cdl_option CYGIMP_LIBC_RAND_SIMPLE1 {
1395 # Knuth implementation #1
1396 # This implements a slightly more complex algorithm
1397 # published in Donald E. Knuth's Art of Computer
1398 # Programming Vol.2 section 3.6 (p.185 in the 3rd ed.).
1399 # This produces better random numbers than the
1400 # simplest approach but is slower.
1402 cdl_option CYGIMP_LIBC_RAND_KNUTH1 {
1411 # This option allows use of the utility function
1412 # strtod() (and consequently atof()) to convert
1413 # from string to double precision floating point
1414 # numbers. Disabling this option removes the
1415 # dependency on the math library package.
1417 cdl_option CYGFUN_LIBC_strtod {
1419 # No user value, uncomment the following line to provide one.
1421 # value_source default
1422 # Default value: 0 != CYGPKG_LIBM
1423 # CYGPKG_LIBM (unknown) == 0
1425 # Requires: CYGPKG_LIBM
1426 # CYGPKG_LIBM (unknown) == 0
1430 # Provides long long conversion functions
1431 # Enabling this option will provide support for the strtoll(),
1432 # strtoull() and atoll() conversion functions, which are
1433 # the long long variants of the standard versions of these
1434 # functions. Supporting this requires extra code and compile
1437 cdl_option CYGFUN_LIBC_STDLIB_CONV_LONGLONG {
1444 # bsearch() tracing level
1445 # Trace verbosity level for debugging the <stdlib.h>
1446 # binary search function bsearch(). Increase this
1447 # value to get additional trace output.
1449 cdl_option CYGNUM_LIBC_BSEARCH_TRACE_LEVEL {
1451 # No user value, uncomment the following line to provide one.
1453 # value_source default
1455 # Legal values: 0 to 1
1458 # qsort() tracing level
1459 # Trace verbosity level for debugging the <stdlib.h>
1460 # quicksort function qsort(). Increase this value
1461 # to get additional trace output.
1463 cdl_option CYGNUM_LIBC_QSORT_TRACE_LEVEL {
1465 # No user value, uncomment the following line to provide one.
1467 # value_source default
1469 # Legal values: 0 to 1
1472 # C library stdlib build options
1473 # Package specific build options including control over
1474 # compiler flags used only in building this package,
1475 # and details of which tests are built.
1477 cdl_component CYGPKG_LIBC_STDLIB_OPTIONS {
1478 # There is no associated value.
1482 # Additional compiler flags
1483 # This option modifies the set of compiler flags for
1484 # building this package. These flags are used in addition
1485 # to the set of global flags.
1487 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_ADD {
1489 # No user value, uncomment the following line to provide one.
1490 # user_value "-fno-rtti -Woverloaded-virtual"
1491 # value_source default
1492 # Default value: "-fno-rtti -Woverloaded-virtual"
1495 # Suppressed compiler flags
1496 # This option modifies the set of compiler flags for
1497 # building this package. These flags are removed from
1498 # the set of global flags if present.
1500 cdl_option CYGPKG_LIBC_STDLIB_CFLAGS_REMOVE {
1502 # No user value, uncomment the following line to provide one.
1503 # user_value -Wno-pointer-sign
1504 # value_source default
1505 # Default value: -Wno-pointer-sign
1508 # C library stdlib tests
1509 # This option specifies the set of tests for this package.
1511 cdl_option CYGPKG_LIBC_STDLIB_TESTS {
1512 # Calculated value: "tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul"
1514 # Current_value: tests/abs tests/atoi tests/atol tests/bsearch tests/div tests/getenv tests/labs tests/ldiv tests/qsort tests/rand1 tests/rand2 tests/rand3 tests/rand4 tests/srand tests/strtol tests/strtoul
1521 # doc: ref/the-ecos-hardware-abstraction-layer.html
1522 # The eCos HAL package provide a porting layer for
1523 # higher-level parts of the system such as the kernel and the
1524 # C library. Each installation should have HAL packages for
1525 # one or more architectures, and for each architecture there
1526 # may be one or more supported platforms. It is necessary to
1527 # select one target architecture and one platform for that
1528 # architecture. There are also a number of configuration
1529 # options that are common to all HAL packages.
1531 cdl_package CYGPKG_HAL {
1532 # Packages cannot be added or removed, nor can their version be changed,
1533 # simply by editing their value. Instead the appropriate configuration
1534 # should be used to perform these actions.
1536 # This value cannot be modified here.
1538 # Current value: 1 current
1539 # Requires: CYGPKG_INFRA
1540 # CYGPKG_INFRA == current
1543 # The following properties are affected by this value
1547 # Platform-independent HAL options
1548 # A number of configuration options are common to most or all
1549 # HAL packages, for example options controlling how much state
1550 # should be saved during a context switch. The implementations
1551 # of these options will vary from architecture to architecture.
1553 cdl_component CYGPKG_HAL_COMMON {
1554 # There is no associated value.
1558 # Provide eCos kernel support
1559 # The HAL can be configured to either support the full eCos
1560 # kernel, or to support only very simple applications which do
1561 # not require a full kernel. If kernel support is not required
1562 # then some of the startup, exception, and interrupt handling
1563 # code can be eliminated.
1565 cdl_option CYGFUN_HAL_COMMON_KERNEL_SUPPORT {
1567 # No user value, uncomment the following line to provide one.
1569 # value_source default
1570 # Default value: CYGPKG_KERNEL
1571 # CYGPKG_KERNEL (unknown) == 0
1573 # Requires: CYGPKG_KERNEL
1574 # CYGPKG_KERNEL (unknown) == 0
1578 # HAL exception support
1579 # When a processor exception occurs, for example an attempt to
1580 # execute an illegal instruction or to perform a divide by
1581 # zero, this exception may be handled in a number of different
1582 # ways. If the target system has gdb support then typically
1583 # the exception will be handled by gdb code. Otherwise if the
1584 # HAL exception support is enabled then the HAL will invoke a
1585 # routine deliver_exception(). Typically this routine will be
1586 # provided by the eCos kernel, but it is possible for
1587 # application code to provide its own implementation. If the
1588 # HAL exception support is not enabled and a processor
1589 # exception occurs then the behaviour of the system is
1592 cdl_option CYGPKG_HAL_EXCEPTIONS {
1594 # No user value, uncomment the following line to provide one.
1596 # value_source default
1597 # Default value: CYGPKG_KERNEL_EXCEPTIONS
1598 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1600 # Requires: CYGPKG_KERNEL_EXCEPTIONS
1601 # CYGPKG_KERNEL_EXCEPTIONS (unknown) == 0
1605 # Stop calling constructors early
1606 # This option supports environments where some constructors
1607 # must be run in the context of a thread rather than at
1608 # simple system startup time. A boolean flag named
1609 # cyg_hal_stop_constructors is set to 1 when constructors
1610 # should no longer be invoked. It is up to some other
1611 # package to deal with the rest of the constructors.
1612 # In the current version this is only possible with the
1615 cdl_option CYGSEM_HAL_STOP_CONSTRUCTORS_ON_FLAG {
1617 # No user value, uncomment the following line to provide one.
1619 # value_source default
1621 # Requires: CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS
1622 # CYGSEM_LIBC_INVOKE_DEFAULT_STATIC_CONSTRUCTORS (unknown) == 0
1626 # HAL uses the MMU and allows for CDL manipulation of it's use
1628 cdl_interface CYGINT_HAL_SUPPORTS_MMU_TABLES {
1629 # No options implement this inferface
1630 # This value cannot be modified here.
1634 # The following properties are affected by this value
1635 # option CYGSEM_HAL_INSTALL_MMU_TABLES
1636 # ActiveIf: CYGINT_HAL_SUPPORTS_MMU_TABLES
1639 # Install MMU tables.
1640 # This option controls whether this application installs
1641 # its own Memory Management Unit (MMU) tables, or relies on the
1642 # existing environment to run.
1644 cdl_option CYGSEM_HAL_INSTALL_MMU_TABLES {
1645 # This option is not active
1646 # ActiveIf constraint: CYGINT_HAL_SUPPORTS_MMU_TABLES
1647 # CYGINT_HAL_SUPPORTS_MMU_TABLES == 0
1651 # No user value, uncomment the following line to provide one.
1653 # value_source default
1654 # Default value: CYG_HAL_STARTUP != "RAM"
1655 # CYG_HAL_STARTUP == ROMRAM
1658 # The following properties are affected by this value
1659 # option CYGSEM_HAL_STATIC_MMU_TABLES
1660 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1663 # Use static MMU tables.
1664 # This option defines an environment where any Memory
1665 # Management Unit (MMU) tables are constant. Normally used by ROM
1666 # based environments, this provides a way to save RAM usage which
1667 # would otherwise be required for these tables.
1669 cdl_option CYGSEM_HAL_STATIC_MMU_TABLES {
1671 # No user value, uncomment the following line to provide one.
1673 # value_source default
1675 # Requires: CYGSEM_HAL_INSTALL_MMU_TABLES
1676 # CYGSEM_HAL_INSTALL_MMU_TABLES == 0
1680 # Route diagnostic output to debug channel
1681 # If not inheriting the console setup from the ROM monitor,
1682 # it is possible to redirect diagnostic output to the debug
1683 # channel by enabling this option. Depending on the debugger
1684 # used it may also be necessary to select a mangler for the
1685 # output to be displayed by the debugger.
1687 cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN {
1688 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
1689 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
1691 # ActiveIf constraint: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
1692 # CYGPKG_HAL_ARM == current
1693 # CYGPKG_HAL_POWERPC_MPC8xx (unknown) == 0
1694 # CYGPKG_HAL_V85X_V850 (unknown) == 0
1695 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
1699 # No user value, uncomment the following line to provide one.
1701 # value_source default
1702 # Default value: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
1703 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
1704 # CYG_HAL_STARTUP == ROMRAM
1707 # The following properties are affected by this value
1708 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
1709 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
1713 # Mangler used on diag output
1714 # It is sometimes necessary to mangle (encode) the
1715 # diag ASCII text output in order for it to show up at the
1716 # other end. In particular, GDB may silently ignore raw
1719 cdl_option CYGSEM_HAL_DIAG_MANGLER {
1720 # This option is not active
1721 # The parent CYGDBG_HAL_DIAG_TO_DEBUG_CHAN is disabled
1724 # No user value, uncomment the following line to provide one.
1726 # value_source default
1727 # Default value: GDB
1728 # Legal values: "GDB" "None"
1733 # HAL interrupt handling
1734 # A number of configuration options related to interrupt
1735 # handling are common to most or all HAL packages, even though
1736 # the implementations will vary from architecture to
1739 cdl_component CYGPKG_HAL_COMMON_INTERRUPTS {
1740 # There is no associated value.
1744 # Use separate stack for interrupts
1745 # When an interrupt occurs this interrupt can be handled either
1746 # on the current stack or on a separate stack maintained by the
1747 # HAL. Using a separate stack requires a small number of extra
1748 # instructions in the interrupt handling code, but it has the
1749 # advantage that it is no longer necessary to allow extra space
1750 # in every thread stack for the interrupt handlers. The amount
1751 # of extra space required depends on the interrupt handlers
1752 # that are being used.
1754 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK {
1756 # No user value, uncomment the following line to provide one.
1758 # The inferred value should not be edited directly.
1760 # value_source inferred
1763 # The following properties are affected by this value
1764 # package CYGPKG_REDBOOT
1765 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
1768 # Interrupt stack size
1769 # This configuration option specifies the stack size in bytes
1770 # for the interrupt stack. Typically this should be a multiple
1771 # of 16, but the exact requirements will vary from architecture
1772 # to architecture. The interrupt stack serves two separate
1773 # purposes. It is used as the stack during system
1774 # initialization. In addition, if the interrupt system is
1775 # configured to use a separate stack then all interrupts will
1776 # be processed on this stack. The exact memory requirements
1777 # will vary from application to application, and will depend
1778 # heavily on whether or not other interrupt-related options,
1779 # for example nested interrupts, are enabled. On most targets,
1780 # in a configuration with no kernel this stack will also be
1781 # the stack used to invoke the application, and must obviously
1782 # be appropriately large in that case.
1784 cdl_option CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE {
1786 # No user value, uncomment the following line to provide one.
1788 # value_source default
1789 # Default value: CYGPKG_KERNEL ? 4096 : 32768
1790 # CYGPKG_KERNEL (unknown) == 0
1792 # Legal values: 128 to 1048576
1795 # Allow nested interrupts
1796 # When an interrupt occurs the HAL interrupt handling code can
1797 # either leave interrupts disabled for the duration of the
1798 # interrupt handling code, or by doing some extra work it can
1799 # reenable interrupts before invoking the interrupt handler and
1800 # thus allow nested interrupts to happen. If all the interrupt
1801 # handlers being used are small and do not involve any loops
1802 # then it is usually better to disallow nested interrupts.
1803 # However if any of the interrupt handlers are more complicated
1804 # than nested interrupts will usually be required.
1806 cdl_option CYGSEM_HAL_COMMON_INTERRUPTS_ALLOW_NESTING {
1808 # No user value, uncomment the following line to provide one.
1810 # value_source default
1814 # Save minimum context on interrupt
1815 # The HAL interrupt handling code can exploit the calling conventions
1816 # defined for a given architecture to reduce the amount of state
1817 # that has to be saved. Generally this improves performance and
1818 # reduces code size. However it can make source-level debugging
1821 cdl_option CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT {
1823 # No user value, uncomment the following line to provide one.
1825 # The inferred value should not be edited directly.
1827 # value_source inferred
1830 # The following properties are affected by this value
1831 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1832 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1833 # component CYGBLD_BUILD_REDBOOT
1834 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
1837 # Chain all interrupts together
1838 # Interrupts can be attached to vectors either singly, or be
1839 # chained together. The latter is necessary if there is no way
1840 # of discovering which device has interrupted without
1841 # inspecting the device itself. It can also reduce the amount
1842 # of RAM needed for interrupt decoding tables and code.
1844 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN {
1846 # No user value, uncomment the following line to provide one.
1848 # value_source default
1852 # Ignore spurious [fleeting] interrupts
1853 # On some hardware, interrupt sources may not be de-bounced or
1854 # de-glitched. Rather than try to handle these interrupts (no
1855 # handling may be possible), this option allows the HAL to simply
1856 # ignore them. In most cases, if the interrupt is real it will
1857 # reoccur in a detectable form.
1859 cdl_option CYGIMP_HAL_COMMON_INTERRUPTS_IGNORE_SPURIOUS {
1861 # No user value, uncomment the following line to provide one.
1863 # value_source default
1868 # HAL context switch support
1869 # A number of configuration options related to thread contexts
1870 # are common to most or all HAL packages, even though the
1871 # implementations will vary from architecture to architecture.
1873 cdl_component CYGPKG_HAL_COMMON_CONTEXT {
1874 # There is no associated value.
1876 # The following properties are affected by this value
1880 # Use minimum thread context
1881 # The thread context switch code can exploit the calling
1882 # conventions defined for a given architecture to reduce the
1883 # amount of state that has to be saved during a context
1884 # switch. Generally this improves performance and reduces
1885 # code size. However it can make source-level debugging more
1888 cdl_option CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM {
1890 # No user value, uncomment the following line to provide one.
1892 # The inferred value should not be edited directly.
1894 # value_source inferred
1897 # The following properties are affected by this value
1898 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1899 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1900 # component CYGBLD_BUILD_REDBOOT
1901 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
1905 # Explicit control over cache behaviour
1906 # These options let the default behaviour of the caches
1907 # be easily configurable.
1909 cdl_component CYGPKG_HAL_CACHE_CONTROL {
1910 # There is no associated value.
1914 # Enable DATA cache on startup
1915 # Enabling this option will cause the data cache to be enabled
1916 # as soon as practicable when eCos starts up. One would choose
1917 # to disable this if the data cache cannot safely be turned on,
1918 # such as a case where the cache(s) require additional platform
1921 cdl_component CYGSEM_HAL_ENABLE_DCACHE_ON_STARTUP {
1923 # No user value, uncomment the following line to provide one.
1925 # value_source default
1930 # DATA cache mode on startup
1931 # This option controls the mode the cache will be set to
1932 # when enabled on startup.
1934 cdl_option CYGSEM_HAL_DCACHE_STARTUP_MODE {
1936 # No user value, uncomment the following line to provide one.
1937 # user_value COPYBACK
1938 # value_source default
1939 # Default value: COPYBACK
1940 # Legal values: "COPYBACK" "WRITETHRU"
1944 # Enable INSTRUCTION cache on startup
1945 # Enabling this option will cause the instruction cache to be enabled
1946 # as soon as practicable when eCos starts up. One would choose
1947 # to disable this if the instruction cache cannot safely be turned on,
1948 # such as a case where the cache(s) require additional platform
1951 cdl_option CYGSEM_HAL_ENABLE_ICACHE_ON_STARTUP {
1953 # No user value, uncomment the following line to provide one.
1955 # value_source default
1960 # Source-level debugging support
1961 # If the source level debugger gdb is to be used for debugging
1962 # application code then it may be necessary to configure in support
1963 # for this in the HAL.
1965 cdl_component CYGPKG_HAL_DEBUG {
1966 # There is no associated value.
1970 # Support for GDB stubs
1971 # The HAL implements GDB stubs for the target.
1973 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS {
1974 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
1975 # This value cannot be modified here.
1979 # The following properties are affected by this value
1980 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
1981 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1982 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
1983 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS
1986 # Include GDB stubs in HAL
1987 # This option causes a set of GDB stubs to be included into the
1988 # system. On some target systems the GDB support will be
1989 # provided by other means, for example by a ROM monitor. On
1990 # other targets, especially when building a ROM-booting system,
1991 # the necessary support has to go into the target library
1992 # itself. When GDB stubs are include in a configuration, HAL
1993 # serial drivers must also be included.
1995 cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS {
1996 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
1997 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
2001 # No user value, uncomment the following line to provide one.
2003 # The inferred value should not be edited directly.
2005 # value_source inferred
2007 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2008 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2010 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
2011 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
2013 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
2014 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
2016 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2017 # CYGSEM_HAL_VIRTUAL_VECTOR_DIAG == 1
2018 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2021 # The following properties are affected by this value
2022 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2023 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
2024 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2025 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2026 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2027 # DefaultValue: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2028 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2029 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2030 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2031 # DefaultValue: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2032 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2033 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2034 # option CYGBLD_BUILD_COMMON_GDB_STUBS
2035 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2036 # option CYGPKG_HAL_GDB_FILEIO
2037 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2038 # option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS
2039 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2040 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2041 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2042 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2043 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2046 # Support for external break support in GDB stubs
2047 # The HAL implements external break (or asynchronous interrupt)
2048 # in the GDB stubs for the target.
2050 cdl_interface CYGINT_HAL_DEBUG_GDB_STUBS_BREAK {
2051 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2052 # This value cannot be modified here.
2056 # The following properties are affected by this value
2057 # option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2058 # ActiveIf: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2061 # Include GDB external break support for stubs
2062 # This option causes the GDB stub to add a serial interrupt handler
2063 # which will listen for GDB break packets. This lets you stop the
2064 # target asynchronously when using GDB, usually by hitting Control+C
2065 # or pressing the STOP button. This option differs from
2066 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT in that it is used when
2067 # GDB stubs are present.
2069 cdl_option CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT {
2070 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
2071 # CYGINT_HAL_DEBUG_GDB_STUBS_BREAK == 1
2075 # No user value, uncomment the following line to provide one.
2077 # value_source default
2078 # Default value: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2079 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2081 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2082 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2085 # The following properties are affected by this value
2086 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2087 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2088 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2089 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2090 # option CYGBLD_BUILD_REDBOOT_WITH_GDB
2091 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2094 # Platform does not support CTRLC
2096 cdl_interface CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED {
2097 # No options implement this inferface
2098 # This value cannot be modified here.
2102 # The following properties are affected by this value
2103 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2104 # ActiveIf: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2107 # Include GDB external break support when no stubs
2108 # This option adds an interrupt handler for the GDB serial line
2109 # which will listen for GDB break packets. This lets you stop the
2110 # target asynchronously when using GDB, usually by hitting Control+C
2111 # or pressing the STOP button. This option differs from
2112 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT in that it is used when the GDB
2113 # stubs are NOT present.
2115 cdl_option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT {
2116 # This option is not active
2117 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2118 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2119 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2121 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2122 # CYGINT_HAL_DEBUG_GDB_CTRLC_UNSUPPORTED == 0
2126 # No user value, uncomment the following line to provide one.
2128 # value_source default
2129 # Default value: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2130 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2132 # Requires: !CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2133 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
2136 # The following properties are affected by this value
2137 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
2138 # ActiveIf: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
2139 # component CYGBLD_BUILD_REDBOOT
2140 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2143 # Include GDB multi-threading debug support
2144 # This option enables some extra HAL code which is needed
2145 # to support multi-threaded source level debugging.
2147 cdl_option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT {
2148 # ActiveIf constraint: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2149 # CYGSEM_HAL_ROM_MONITOR == 1
2150 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
2154 # No user value, uncomment the following line to provide one.
2156 # value_source default
2159 # The following properties are affected by this value
2160 # option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
2161 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2162 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
2163 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2166 # Number of times to retry sending a $O packet
2167 # This option controls the number of attempts that eCos programs
2168 # will make to send a $O packet to a host GDB process. If it is
2169 # set non-zero, then the target process will attempt to resend the
2170 # $O packet data up to this number of retries. Caution: use of
2171 # this option is not recommended as it can thoroughly confuse the
2174 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES {
2176 # No user value, uncomment the following line to provide one.
2178 # value_source default
2182 # Timeout period for GDB packets
2183 # This option controls the time (in milliseconds) that eCos programs
2184 # will wait for a response when sending packets to a host GDB process.
2185 # If this time elapses, then the packet will be resent, up to some
2186 # maximum number of times (CYGNUM_HAL_DEBUG_GDB_PROTOCOL_RETRIES).
2188 cdl_option CYGNUM_HAL_DEBUG_GDB_PROTOCOL_TIMEOUT {
2190 # No user value, uncomment the following line to provide one.
2192 # value_source default
2193 # Default value: 500
2196 # Location of CRC32 table
2197 # The stubs use a 1 kilobyte CRC table that can either be pregenerated
2198 # and placed in ROM, or generated at runtime in RAM. Depending on
2199 # your memory constraints, one of these options may be better.
2201 cdl_option CYGDBG_HAL_CRCTABLE_LOCATION {
2203 # No user value, uncomment the following line to provide one.
2205 # value_source default
2206 # Default value: RAM
2207 # Legal values: "ROM" "RAM"
2211 # ROM monitor support
2212 # Support for ROM monitors can be built in to your application.
2213 # It may also be relevant to build your application as a ROM monitor
2214 # itself. Such options are contained here if relevant for your chosen
2215 # platform. The options and ROM monitors available to choose are
2216 # platform-dependent.
2218 cdl_component CYGPKG_HAL_ROM_MONITOR {
2219 # There is no associated value.
2221 # The following properties are affected by this value
2225 # Target has virtual vector support
2227 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT {
2228 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
2229 # This value cannot be modified here.
2233 # The following properties are affected by this value
2234 # component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2235 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2238 # Target supports baud rate control via vectors
2239 # Whether this target supports the __COMMCTL_GETBAUD
2240 # and __COMMCTL_SETBAUD virtual vector comm control operations.
2242 cdl_interface CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT {
2243 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2244 # This value cannot be modified here.
2248 # The following properties are affected by this value
2249 # option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE
2250 # ActiveIf: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
2253 # Enable use of virtual vector calling interface
2254 # Virtual vector support allows the HAL to let the ROM
2255 # monitor handle certain operations. The virtual vector table
2256 # defines a calling interface between applications running in
2257 # RAM and the ROM monitor.
2259 cdl_component CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT {
2260 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
2261 # CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT == 1
2264 # Calculated value: 1
2268 # The following properties are affected by this value
2269 # component CYGBLD_BUILD_REDBOOT
2270 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2271 # package CYGPKG_DEVS_ETH_PHY
2272 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
2276 # Inherit console settings from ROM monitor
2277 # When this option is set, the application will inherit
2278 # the console as set up by the ROM monitor. This means
2279 # that the application will use whatever channel and
2280 # mangling style was used by the ROM monitor when
2281 # the application was launched.
2283 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE {
2284 # This option is not active
2285 # ActiveIf constraint: CYGSEM_HAL_USE_ROM_MONITOR
2286 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2290 # No user value, uncomment the following line to provide one.
2292 # value_source default
2293 # Default value: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2294 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2297 # The following properties are affected by this value
2298 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2299 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2300 # option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2301 # Calculated: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2304 # Debug channel is configurable
2305 # This option is a configuration hint - it is enabled
2306 # when the HAL initialization code will make use
2307 # of the debug channel configuration option.
2309 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE {
2310 # Calculated value: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2311 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2315 # The following properties are affected by this value
2316 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
2317 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2320 # Console channel is configurable
2321 # This option is a configuration hint - it is enabled
2322 # when the HAL initialization code will make use
2323 # of the console channel configuration option.
2325 cdl_option CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE {
2326 # Calculated value: !CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE && !CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2327 # CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE == 0
2328 # CYGDBG_HAL_DIAG_TO_DEBUG_CHAN == 0
2332 # The following properties are affected by this value
2333 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
2334 # ActiveIf: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
2337 # Initialize whole of virtual vector table
2338 # This option will cause the whole of the virtual
2339 # vector table to be initialized with dummy values on
2340 # startup. When this option is enabled, all the
2341 # options below must also be enabled - or the
2342 # table would be empty when the application
2344 # On targets where older ROM monitors without
2345 # virtual vector support may still be in use, it is
2346 # necessary for RAM applictions to initialize the
2347 # table (since all HAL diagnostics and debug IO
2348 # happens via the table).
2350 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE {
2352 # No user value, uncomment the following line to provide one.
2354 # value_source default
2355 # Default value: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2356 # CYG_HAL_STARTUP == ROMRAM
2357 # CYGSEM_HAL_USE_ROM_MONITOR == 0
2359 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2360 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET == 1
2362 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2363 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US == 1
2365 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2366 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE == 1
2368 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2369 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA == 1
2371 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2372 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS == 1
2375 # The following properties are affected by this value
2376 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2377 # ActiveIf: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2378 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2379 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2380 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION
2381 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2382 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2383 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2384 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2385 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2386 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2387 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2388 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2389 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2392 # Claim virtual vector table entries by default
2393 # By default most virtual vectors will be claimed by
2394 # RAM startup configurations, meaning that the RAM
2395 # application will provide the services. The
2396 # exception is COMMS support (HAL
2397 # diagnostics/debugging IO) which is left in the
2398 # control of the ROM monitor.
2399 # The reasoning behind this is to get as much of the
2400 # code exercised during regular development so it
2401 # is known to be working the few times a new ROM
2402 # monitor or a ROM production configuration is used
2403 # - COMMS are excluded only by necessity in order to
2404 # avoid breaking an existing debugger connections
2405 # (there may be ways around this).
2406 # For production RAM configurations this option can
2407 # be switched off, causing the appliction to rely on
2408 # the ROM monitor for these services, thus
2409 # saving some space.
2410 # Individual vectors may also be left unclaimed,
2411 # controlled by the below options (meaning that the
2412 # associated service provided by the ROM monitor
2415 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT {
2416 # This option is not active
2417 # ActiveIf constraint: !CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2418 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2422 # No user value, uncomment the following line to provide one.
2424 # value_source default
2427 # The following properties are affected by this value
2428 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2429 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2430 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2431 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2432 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2433 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2434 # option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2435 # DefaultValue: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2438 # Claim reset virtual vectors
2439 # This option will cause the reset and kill_by_reset
2440 # virtual vectors to be claimed.
2442 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET {
2444 # No user value, uncomment the following line to provide one.
2446 # value_source default
2447 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2448 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2449 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2452 # The following properties are affected by this value
2453 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2454 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_RESET
2457 # Claim version virtual vectors
2458 # This option will cause the version
2459 # virtual vectors to be claimed.
2461 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_VERSION {
2463 # No user value, uncomment the following line to provide one.
2465 # value_source default
2466 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2467 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2471 # Claim delay_us virtual vector
2472 # This option will cause the delay_us
2473 # virtual vector to be claimed.
2475 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US {
2477 # No user value, uncomment the following line to provide one.
2479 # value_source default
2480 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2481 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2482 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2485 # The following properties are affected by this value
2486 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2487 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DELAY_US
2490 # Claim cache virtual vectors
2491 # This option will cause the cache virtual vectors
2494 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE {
2496 # No user value, uncomment the following line to provide one.
2498 # value_source default
2499 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2500 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2501 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2504 # The following properties are affected by this value
2505 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2506 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_CACHE
2509 # Claim data virtual vectors
2510 # This option will cause the data virtual vectors
2511 # to be claimed. At present there is only one, used
2512 # by the RedBoot ethernet driver to share diag output.
2514 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA {
2516 # No user value, uncomment the following line to provide one.
2518 # value_source default
2519 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT
2520 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2521 # CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DEFAULT == 0
2524 # The following properties are affected by this value
2525 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2526 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_DATA
2529 # Claim comms virtual vectors
2530 # This option will cause the communication tables
2531 # that are part of the virtual vectors mechanism to
2532 # be claimed. Note that doing this may cause an
2533 # existing ROM monitor communication connection to
2534 # be closed. For this reason, the option is disabled
2535 # per default for normal application
2538 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS {
2540 # No user value, uncomment the following line to provide one.
2542 # value_source default
2543 # Default value: CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2544 # CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE == 1
2545 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2548 # The following properties are affected by this value
2549 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2550 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2551 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2552 # DefaultValue: !CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2553 # option CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
2554 # Calculated: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2555 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2556 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2559 # Do diagnostic IO via virtual vector table
2560 # All HAL IO happens via the virtual vector table / comm
2561 # tables when those tables are supported by the HAL.
2562 # If so desired, the low-level IO functions can
2563 # still be provided by the RAM application by
2564 # enabling the CLAIM_COMMS option.
2566 cdl_option CYGSEM_HAL_VIRTUAL_VECTOR_DIAG {
2567 # Calculated value: 1
2571 # The following properties are affected by this value
2572 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2573 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2574 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2575 # Requires: !CYGSEM_HAL_VIRTUAL_VECTOR_DIAG || CYGSEM_HAL_VIRTUAL_VECTOR_CLAIM_COMMS
2579 # Behave as a ROM monitor
2580 # Enable this option if this program is to be used as a ROM monitor,
2581 # i.e. applications will be loaded into RAM on the TX53 module, and this
2582 # ROM monitor may process exceptions or interrupts generated from the
2583 # application. This enables features such as utilizing a separate
2584 # interrupt stack when exceptions are generated.
2586 cdl_option CYGSEM_HAL_ROM_MONITOR {
2588 # No user value, uncomment the following line to provide one.
2590 # The inferred value should not be edited directly.
2592 # value_source inferred
2594 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
2595 # CYG_HAL_STARTUP == ROMRAM
2596 # CYG_HAL_STARTUP == ROMRAM
2599 # The following properties are affected by this value
2600 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2601 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2602 # option CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
2603 # ActiveIf: CYGSEM_HAL_ROM_MONITOR || CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
2604 # option CYGPRI_REDBOOT_ROM_MONITOR
2605 # Requires: CYGSEM_HAL_ROM_MONITOR
2608 # Work with a ROM monitor
2609 # Support can be enabled for different varieties of ROM monitor.
2610 # This support changes various eCos semantics such as the encoding
2611 # of diagnostic output, or the overriding of hardware interrupt
2613 # Firstly there is "Generic" support which prevents the HAL
2614 # from overriding the hardware vectors that it does not use, to
2615 # instead allow an installed ROM monitor to handle them. This is
2616 # the most basic support which is likely to be common to most
2617 # implementations of ROM monitor.
2618 # "GDB_stubs" provides support when GDB stubs are included in
2619 # the ROM monitor or boot ROM.
2621 cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
2623 # No user value, uncomment the following line to provide one.
2625 # value_source default
2626 # Default value: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
2627 # CYG_HAL_STARTUP == ROMRAM
2629 # Legal values: "Generic" "GDB_stubs"
2630 # Requires: CYG_HAL_STARTUP == "RAM"
2631 # CYG_HAL_STARTUP == ROMRAM
2634 # The following properties are affected by this value
2635 # option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2636 # Requires: ! CYGSEM_HAL_USE_ROM_MONITOR
2637 # option CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
2638 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR || CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2639 # option CYGSEM_HAL_VIRTUAL_VECTOR_INHERIT_CONSOLE
2640 # ActiveIf: CYGSEM_HAL_USE_ROM_MONITOR
2641 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
2642 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
2646 # Platform defined I/O channels.
2647 # Platforms which provide additional I/O channels can implement
2648 # this interface, indicating that the function plf_if_init()
2649 # needs to be called.
2651 cdl_interface CYGINT_HAL_PLF_IF_INIT {
2652 # No options implement this inferface
2653 # This value cannot be modified here.
2658 # Platform IDE I/O support.
2659 # Platforms which provide IDE controllers can implement
2660 # this interface, indicating that IDE I/O macros are
2663 cdl_interface CYGINT_HAL_PLF_IF_IDE {
2664 # No options implement this inferface
2665 # This value cannot be modified here.
2669 # The following properties are affected by this value
2670 # component CYGSEM_REDBOOT_DISK_IDE
2671 # ActiveIf: CYGINT_HAL_PLF_IF_IDE != 0
2674 # File I/O operations via GDB
2675 # This option enables support for various file I/O
2676 # operations using the GDB remote protocol to communicate
2677 # with GDB. The operations are then performed on the
2678 # debugging host by proxy. These operations are only
2679 # currently available by using a system call interface
2680 # to RedBoot. This may change in the future.
2682 cdl_option CYGPKG_HAL_GDB_FILEIO {
2683 # This option is not active
2684 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
2685 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
2689 # No user value, uncomment the following line to provide one.
2691 # value_source default
2693 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
2694 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
2698 # Build Compiler sanity checking tests
2699 # Enabling this option causes compiler tests to be built.
2701 cdl_option CYGPKG_HAL_BUILD_COMPILER_TESTS {
2703 # No user value, uncomment the following line to provide one.
2705 # value_source default
2708 # The following properties are affected by this value
2709 # component CYGPKG_HAL_TESTS
2710 # Calculated: "tests/context tests/basic"
2711 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2712 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2713 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2717 # This option specifies the set of tests for the common HAL.
2719 cdl_component CYGPKG_HAL_TESTS {
2720 # Calculated value: "tests/context tests/basic"
2721 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2722 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2723 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2724 # CYGINT_HAL_TESTS_NO_CACHES == 0
2725 # CYGPKG_HAL_BUILD_COMPILER_TESTS == 0
2726 # CYGVAR_KERNEL_COUNTERS_CLOCK (unknown) == 0
2728 # Current_value: tests/context tests/basic tests/cache tests/intr
2732 # Interface for cache presence
2733 # Some architectures and/or platforms do not have caches. By
2734 # implementing this interface, these can disable the various
2735 # cache-related tests.
2737 cdl_interface CYGINT_HAL_TESTS_NO_CACHES {
2738 # No options implement this inferface
2739 # This value cannot be modified here.
2741 # Current value: 0 0
2743 # The following properties are affected by this value
2744 # component CYGPKG_HAL_TESTS
2745 # Calculated: "tests/context tests/basic"
2746 # . ((!CYGINT_HAL_TESTS_NO_CACHES) ? " tests/cache" : "")
2747 # . ((CYGPKG_HAL_BUILD_COMPILER_TESTS) ? " tests/cpp1 tests/vaargs" : "")
2748 # . ((!CYGVAR_KERNEL_COUNTERS_CLOCK) ? " tests/intr" : "")
2753 # The ARM architecture HAL package provides generic
2754 # support for this processor architecture. It is also
2755 # necessary to select a specific target platform HAL
2758 cdl_package CYGPKG_HAL_ARM {
2759 # Packages cannot be added or removed, nor can their version be changed,
2760 # simply by editing their value. Instead the appropriate configuration
2761 # should be used to perform these actions.
2763 # This value cannot be modified here.
2765 # Current value: 1 current
2767 # The following properties are affected by this value
2768 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
2769 # ActiveIf: CYGPKG_HAL_ARM || CYGPKG_HAL_POWERPC_MPC8xx || CYGPKG_HAL_V85X_V850 || CYGSEM_HAL_VIRTUAL_VECTOR_DIAG
2770 # interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
2771 # ActiveIf: CYGPKG_HAL_ARM
2775 # The CPU architecture supports THUMB mode
2777 cdl_interface CYGINT_HAL_ARM_THUMB_ARCH {
2778 # No options implement this inferface
2779 # This value cannot be modified here.
2783 # The following properties are affected by this value
2784 # option CYGHWR_THUMB
2785 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2786 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2787 # ActiveIf: CYGINT_HAL_ARM_THUMB_ARCH != 0
2790 # Enable Thumb instruction set
2791 # Enable use of the Thumb instruction set.
2793 cdl_option CYGHWR_THUMB {
2794 # This option is not active
2795 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2796 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2800 # No user value, uncomment the following line to provide one.
2802 # value_source default
2805 # The following properties are affected by this value
2806 # option CYGBLD_ARM_ENABLE_THUMB_INTERWORK
2807 # DefaultValue: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2808 # option CYGBLD_GLOBAL_CFLAGS
2809 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2813 # Use EABI tool-chain to compile eCos.
2815 cdl_option CYGBLD_ARM_EABI {
2817 # No user value, uncomment the following line to provide one.
2819 # value_source default
2822 # The following properties are affected by this value
2823 # option CYGBLD_GLOBAL_COMMAND_PREFIX
2824 # DefaultValue: "arm-cortexa8-linux-gnu" . (CYGBLD_ARM_EABI ? "eabi" : "")
2825 # option CYGBLD_GLOBAL_CFLAGS
2826 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2829 # Enable Thumb interworking compiler option
2830 # This option controls the use of -mthumb-interwork in the
2831 # compiler flags. It defaults enabled in Thumb or ROM monitor
2832 # configurations, but can be overridden for reduced memory
2833 # footprint where interworking is not a requirement.
2835 cdl_option CYGBLD_ARM_ENABLE_THUMB_INTERWORK {
2836 # This option is not active
2837 # ActiveIf constraint: CYGINT_HAL_ARM_THUMB_ARCH != 0
2838 # CYGINT_HAL_ARM_THUMB_ARCH == 0
2842 # No user value, uncomment the following line to provide one.
2844 # value_source default
2845 # Default value: (CYGHWR_THUMB || CYGSEM_HAL_ROM_MONITOR)
2847 # CYGSEM_HAL_ROM_MONITOR == 1
2850 # The following properties are affected by this value
2851 # option CYGBLD_GLOBAL_CFLAGS
2852 # DefaultValue: (CYGHWR_THUMB ? "-mthumb " : "") . (CYGBLD_ARM_ENABLE_THUMB_INTERWORK ? "-mthumb-interwork " : "") . (CYGBLD_ARM_EABI ? "-mabi=aapcs-linux -msoft-float " : "-mabi=apcs-gnu ") . "-march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
2855 # The platform and architecture supports Big Endian operation
2857 cdl_interface CYGINT_HAL_ARM_BIGENDIAN {
2858 # No options implement this inferface
2859 # This value cannot be modified here.
2863 # The following properties are affected by this value
2864 # option CYGHWR_HAL_ARM_BIGENDIAN
2865 # ActiveIf: CYGINT_HAL_ARM_BIGENDIAN != 0
2868 # Use big-endian mode
2869 # Use the CPU in big-endian mode.
2871 cdl_option CYGHWR_HAL_ARM_BIGENDIAN {
2872 # This option is not active
2873 # ActiveIf constraint: CYGINT_HAL_ARM_BIGENDIAN != 0
2874 # CYGINT_HAL_ARM_BIGENDIAN == 0
2878 # No user value, uncomment the following line to provide one.
2880 # value_source default
2884 # The platform uses a processor with an ARM7 core
2886 cdl_interface CYGINT_HAL_ARM_ARCH_ARM7 {
2887 # No options implement this inferface
2888 # This value cannot be modified here.
2892 # The following properties are affected by this value
2893 # option CYGHWR_HAL_ARM_CPU_FAMILY
2894 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2895 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2896 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2897 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2899 # option CYGHWR_HAL_ARM_CPU_FAMILY
2900 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2901 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2902 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2903 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2907 # The platform uses a processor with an ARM9 core
2909 cdl_interface CYGINT_HAL_ARM_ARCH_ARM9 {
2910 # Implemented by CYGPKG_HAL_ARM_MX53, active, enabled
2911 # This value cannot be modified here.
2915 # The following properties are affected by this value
2916 # option CYGHWR_HAL_ARM_CPU_FAMILY
2917 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2918 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2919 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2920 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2922 # option CYGHWR_HAL_ARM_CPU_FAMILY
2923 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2924 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2925 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2926 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2930 # The platform uses a processor with a StrongARM core
2932 cdl_interface CYGINT_HAL_ARM_ARCH_STRONGARM {
2933 # No options implement this inferface
2934 # This value cannot be modified here.
2938 # The following properties are affected by this value
2939 # option CYGHWR_HAL_ARM_CPU_FAMILY
2940 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2941 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2942 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2943 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2945 # option CYGHWR_HAL_ARM_CPU_FAMILY
2946 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2947 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2948 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2949 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2953 # The platform uses a processor with a XScale core
2955 cdl_interface CYGINT_HAL_ARM_ARCH_XSCALE {
2956 # No options implement this inferface
2957 # This value cannot be modified here.
2961 # The following properties are affected by this value
2962 # option CYGHWR_HAL_ARM_CPU_FAMILY
2963 # LegalValues: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2964 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2965 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2966 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
2968 # option CYGHWR_HAL_ARM_CPU_FAMILY
2969 # DefaultValue: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2970 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2971 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2972 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2977 # It is possible to optimize code for different
2978 # ARM CPU families. This option selects which CPU to
2979 # optimize for on boards that support multiple CPU types.
2981 cdl_option CYGHWR_HAL_ARM_CPU_FAMILY {
2983 # No user value, uncomment the following line to provide one.
2985 # value_source default
2986 # Default value: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" :
2987 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" :
2988 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" :
2989 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" :
2991 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
2992 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
2993 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
2994 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
2996 # Legal values: (CYGINT_HAL_ARM_ARCH_ARM7 != 0) ? "ARM7" : ""
2997 # (CYGINT_HAL_ARM_ARCH_ARM9 != 0) ? "ARM9" : ""
2998 # (CYGINT_HAL_ARM_ARCH_STRONGARM != 0) ? "StrongARM" : ""
2999 # (CYGINT_HAL_ARM_ARCH_XSCALE != 0) ? "XScale" : ""
3001 # CYGINT_HAL_ARM_ARCH_ARM7 == 0
3002 # CYGINT_HAL_ARM_ARCH_ARM9 == 1
3003 # CYGINT_HAL_ARM_ARCH_STRONGARM == 0
3004 # CYGINT_HAL_ARM_ARCH_XSCALE == 0
3007 # Provide diagnostic dump for exceptions
3008 # Print messages about hardware exceptions, including
3009 # raw exception frame dump and register contents.
3011 cdl_option CYGHWR_HAL_ARM_DUMP_EXCEPTIONS {
3013 # No user value, uncomment the following line to provide one.
3015 # value_source default
3017 # Requires: !CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3018 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3022 # Process all exceptions with the eCos application
3023 # Normal RAM-based programs which do not include GDB stubs
3024 # defer processing of the illegal instruction exception to GDB.
3025 # Setting this options allows the program to explicitly handle
3026 # the illegal instruction exception itself. Note: this will
3027 # prevent the use of GDB to debug the application as breakpoints
3028 # will no longer work.
3030 cdl_option CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS {
3032 # No user value, uncomment the following line to provide one.
3034 # value_source default
3038 # Support GDB thread operations via ICE/Multi-ICE
3039 # Allow GDB to get thread information via the ICE/Multi-ICE
3042 cdl_option CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT {
3044 # No user value, uncomment the following line to provide one.
3046 # value_source default
3048 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
3049 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
3051 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
3052 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
3054 # Requires: CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT
3055 # CYGDBG_KERNEL_DEBUG_GDB_THREAD_SUPPORT (unknown) == 0
3059 # Support for 'gprof' callbacks
3060 # The ARM HAL provides the macro for 'gprof' callbacks from RedBoot
3061 # to acquire the interrupt-context PC and SP, when this option is
3064 cdl_option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT {
3065 # This option is not active
3066 # ActiveIf constraint: CYGSEM_REDBOOT_BSP_SYSCALLS
3067 # CYGSEM_REDBOOT_BSP_SYSCALLS == 0
3069 # ActiveIf constraint: CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT || CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
3070 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
3071 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
3074 # Calculated value: 1
3079 # Accept exceptions and irq's occurring in user mode
3080 # For standalone Redboot based programs running in user mode.
3082 cdl_option CYGOPT_HAL_ARM_WITH_USER_MODE {
3084 # No user value, uncomment the following line to provide one.
3086 # value_source default
3090 # Preserve svc spsr before returning to svc mode
3091 # This option secures exception and breakpoint processing
3092 # triggered during execution of application specific SWI
3095 cdl_option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR {
3097 # No user value, uncomment the following line to provide one.
3099 # value_source default
3105 cdl_option CYGBLD_LINKER_SCRIPT {
3106 # Calculated value: "src/arm.ld"
3108 # Current_value: src/arm.ld
3111 # Implementations of hal_arm_mem_real_region_top()
3113 cdl_interface CYGINT_HAL_ARM_MEM_REAL_REGION_TOP {
3114 # No options implement this inferface
3115 # This value cannot be modified here.
3120 # Freescale SoC architecture
3121 # This HAL variant package provides generic
3122 # support for the Freescale SoC. It is also
3123 # necessary to select a specific target platform HAL
3126 cdl_package CYGPKG_HAL_ARM_MX53 {
3127 # Packages cannot be added or removed, nor can their version be changed,
3128 # simply by editing their value. Instead the appropriate configuration
3129 # should be used to perform these actions.
3131 # This value cannot be modified here.
3133 # Current value: 1 current
3135 # The following properties are affected by this value
3136 # option CYGOPT_HAL_ARM_MXC_FEC_MIIGSK
3137 # ActiveIf: CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX53
3138 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
3139 # ActiveIf: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
3140 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
3144 # Processor clock rate
3145 # The processor can run at various frequencies.
3146 # These values are expressed in KHz. Note that there are
3147 # several steppings of the rate to run at different
3148 # maximum frequencies. Check the specs to make sure that your
3149 # particular processor can run at the rate you select here.
3151 cdl_option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK {
3152 # This option is not active
3153 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM"
3154 # CYG_HAL_STARTUP == ROMRAM
3158 # No user value, uncomment the following line to provide one.
3160 # value_source default
3161 # Default value: CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT ?
3162 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT : 150000
3163 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3164 # CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK_OVERRIDE_DEFAULT (unknown) == 0
3166 # Legal values: 150000 200000
3169 # Real-time clock constants
3171 cdl_component CYGNUM_HAL_RTC_CONSTANTS {
3172 # There is no associated value.
3176 # Real-time clock numerator
3178 cdl_option CYGNUM_HAL_RTC_NUMERATOR {
3179 # Calculated value: 1000000000
3181 # Current_value: 1000000000
3184 # Real-time clock denominator
3185 # This option selects the heartbeat rate for the real-time clock.
3186 # The rate is specified in ticks per second. Change this value
3187 # with caution - too high and your system will become saturated
3188 # just handling clock interrupts, too low and some operations
3189 # such as thread scheduling may become sluggish.
3191 cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
3193 # No user value, uncomment the following line to provide one.
3195 # value_source default
3196 # Default value: 100
3198 # The following properties are affected by this value
3199 # option CYGNUM_HAL_RTC_PERIOD
3200 # Calculated: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3203 # Real-time clock period
3205 cdl_option CYGNUM_HAL_RTC_PERIOD {
3206 # Calculated value: (3686400/CYGNUM_HAL_RTC_DENOMINATOR)
3207 # CYGNUM_HAL_RTC_DENOMINATOR == 100
3209 # Current_value: 36864
3213 # UART1 available as diagnostic/debug channel
3214 # The chip has multiple serial channels which may be
3215 # used for different things on different platforms. This
3216 # interface allows a platform to indicate that the specified
3217 # serial port can be used as a diagnostic and/or debug channel.
3219 cdl_interface CYGHWR_HAL_ARM_SOC_UART1 {
3220 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3221 # This value cannot be modified here.
3225 # The following properties are affected by this value
3228 # UART2 available as diagnostic/debug channel
3229 # The chip has multiple serial channels which may be
3230 # used for different things on different platforms. This
3231 # interface allows a platform to indicate that the specified
3232 # serial port can be used as a diagnostic and/or debug channel.
3234 cdl_interface CYGHWR_HAL_ARM_SOC_UART2 {
3235 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3236 # This value cannot be modified here.
3240 # The following properties are affected by this value
3243 # UART3 available as diagnostic/debug channel
3244 # The chip has multiple serial channels which may be
3245 # used for different things on different platforms. This
3246 # interface allows a platform to indicate that the specified
3247 # serial port can be used as a diagnostic and/or debug channel.
3249 cdl_interface CYGHWR_HAL_ARM_SOC_UART3 {
3250 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3251 # This value cannot be modified here.
3255 # The following properties are affected by this value
3258 # UART4 available as diagnostic/debug channel
3259 # The chip has multiple serial channels which may be
3260 # used for different things on different platforms. This
3261 # interface allows a platform to indicate that the specified
3262 # serial port can be used as a diagnostic and/or debug channel.
3264 cdl_interface CYGHWR_HAL_ARM_SOC_UART4 {
3265 # Implemented by CYGPKG_HAL_ARM_TX53KARO, active, enabled
3266 # This value cannot be modified here.
3270 # The following properties are affected by this value
3273 # UART5 available as diagnostic/debug channel
3274 # The chip has multiple serial channels which may be
3275 # used for different things on different platforms. This
3276 # interface allows a platform to indicate that the specified
3277 # serial port can be used as a diagnostic and/or debug channel.
3279 cdl_interface CYGHWR_HAL_ARM_SOC_UART5 {
3280 # No options implement this inferface
3281 # This value cannot be modified here.
3287 # This HAL platform package provides generic
3288 # support for the Ka-Ro electronics TX53 module.
3290 cdl_package CYGPKG_HAL_ARM_TX53KARO {
3291 # Packages cannot be added or removed, nor can their version be changed,
3292 # simply by editing their value. Instead the appropriate configuration
3293 # should be used to perform these actions.
3295 # This value cannot be modified here.
3297 # Current value: 1 current
3298 # Requires: CYGINT_ISO_CTYPE
3299 # CYGINT_ISO_CTYPE == 1
3301 # Requires: CYGBLD_BUILD_REDBOOT == 1
3302 # CYGBLD_BUILD_REDBOOT == 1
3308 # The only startup type allowed is ROMRAM, since this will allow
3309 # the program to exist in ROM, but be copied to RAM during startup
3310 # which is required to boot from NAND flash.
3312 cdl_component CYG_HAL_STARTUP {
3314 # No user value, uncomment the following line to provide one.
3316 # value_source default
3317 # Default value: ROMRAM
3318 # Legal values: "ROMRAM" "RAM"
3320 # The following properties are affected by this value
3321 # option CYGSEM_HAL_ROM_MONITOR
3322 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3323 # option CYGSEM_HAL_ROM_MONITOR
3324 # Requires: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3325 # option CYGSEM_HAL_USE_ROM_MONITOR
3326 # DefaultValue: CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0
3327 # option CYGSEM_HAL_USE_ROM_MONITOR
3328 # Requires: CYG_HAL_STARTUP == "RAM"
3329 # option CYGHWR_HAL_ARM_SOC_PROCESSOR_CLOCK
3330 # ActiveIf: CYG_HAL_STARTUP == "ROM"
3331 # option CYGSEM_HAL_INSTALL_MMU_TABLES
3332 # DefaultValue: CYG_HAL_STARTUP != "RAM"
3333 # component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN
3334 # DefaultValue: (CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS || CYG_HAL_STARTUP == "RAM") ? 1 : 0
3335 # option CYGSEM_HAL_VIRTUAL_VECTOR_INIT_WHOLE_TABLE
3336 # DefaultValue: CYG_HAL_STARTUP != "RAM" || !CYGSEM_HAL_USE_ROM_MONITOR
3337 # option CYGBLD_BUILD_REDBOOT_WITH_THREADS
3338 # ActiveIf: CYG_HAL_STARTUP != "RAM"
3339 # option CYGPRI_REDBOOT_ROM_MONITOR
3340 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3341 # option CYGPRI_REDBOOT_ROM_MONITOR
3342 # ActiveIf: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
3345 # Diagnostic serial port baud rate
3346 # This option selects the baud rate used for the console port.
3347 # Note: this should match the value chosen for the GDB port if the
3348 # console and GDB port are the same.
3350 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
3352 # No user value, uncomment the following line to provide one.
3354 # value_source default
3355 # Default value: 115200
3356 # Legal values: 9600 19200 38400 57600 115200
3359 # GDB serial port baud rate
3360 # This option selects the baud rate used for the GDB port.
3361 # Note: this should match the value chosen for the console port if the
3362 # console and GDB port are the same.
3364 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
3366 # No user value, uncomment the following line to provide one.
3368 # value_source default
3369 # Default value: 115200
3370 # Legal values: 9600 19200 38400 57600 115200
3373 # Number of communication channels on the TX53
3375 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
3376 # Calculated value: 5
3380 # The following properties are affected by this value
3381 # option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL
3382 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3383 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3384 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3385 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3386 # LegalValues: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3390 # The TX53 provides access to five serial ports. This option
3391 # chooses which port will be used to connect to a host
3394 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
3395 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
3396 # CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE == 1
3400 # No user value, uncomment the following line to provide one.
3402 # value_source default
3404 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3405 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3408 # Default console channel.
3410 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
3411 # Calculated value: 0
3414 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3415 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3417 # The following properties are affected by this value
3418 # option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL
3419 # DefaultValue: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3422 # Console serial port
3423 # The TX53 provides access to three serial ports. This option
3424 # chooses which port will be used for console output.
3426 cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
3427 # ActiveIf constraint: CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
3428 # CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE == 1
3432 # No user value, uncomment the following line to provide one.
3434 # value_source default
3435 # Default value: CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
3436 # CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT == 0
3438 # Legal values: 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
3439 # CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS == 5
3442 # Ka-Ro electronics TX53 module build options
3443 # Package specific build options including control over
3444 # compiler flags used only in building this package,
3445 # and details of which tests are built.
3447 cdl_component CYGPKG_HAL_ARM_TX53_OPTIONS {
3448 # There is no associated value.
3449 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3450 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
3456 # This option specifies the SDRAM size of the TX53 module.
3458 cdl_option CYGNUM_HAL_ARM_TX53_SDRAM_SIZE {
3460 # No user value, uncomment the following line to provide one.
3461 # user_value 0x20000000
3462 # value_source default
3463 # Default value: 0x20000000
3464 # Legal values: 0x40000000 0x20000000
3468 # This option specifies the CPU clock in MHz of the TX51 module.
3470 cdl_option CYGNUM_HAL_ARM_TX53_CPU_CLK {
3474 # Default value: 1000
3475 # Legal values: 800 1000
3478 # Enable low level debugging with LED
3479 # This option enables low level debugging by blink codes
3480 # of the LED on STK5.
3482 cdl_option CYGOPT_HAL_ARM_TX53_DEBUG {
3484 # No user value, uncomment the following line to provide one.
3486 # value_source default
3487 # Default value: false
3488 # false (unknown) == 0
3492 # Additional compiler flags
3493 # This option modifies the set of compiler flags for
3494 # building the TX53 HAL. These flags are used in addition
3495 # to the set of global flags.
3497 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_ADD {
3499 # No user value, uncomment the following line to provide one.
3501 # value_source default
3505 # Suppressed compiler flags
3506 # This option modifies the set of compiler flags for
3507 # building the TX53 HAL. These flags are removed from
3508 # the set of global flags if present.
3510 cdl_option CYGPKG_HAL_ARM_TX53_CFLAGS_REMOVE {
3512 # No user value, uncomment the following line to provide one.
3514 # value_source default
3518 # Show a splash screen from the FIS partition: 'logo'
3519 # When this option is enabled, RedBoot will look for a flash partition
3520 # named 'logo' and display the contents of this partition as initial
3523 cdl_option CYGHWR_MX53_LCD_LOGO {
3524 # ActiveIf constraint: CYGPKG_DEVS_IMX_IPU
3525 # CYGPKG_DEVS_IMX_IPU == current
3529 # No user value, uncomment the following line to provide one.
3531 # value_source default
3538 cdl_component CYGHWR_MEMORY_LAYOUT {
3539 # Calculated value: "arm_tx53_romram"
3541 # Current_value: arm_tx53_romram
3545 # Memory layout linker script fragment
3547 cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
3548 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.ldi>"
3550 # Current_value: <pkgconf/mlt_arm_tx53_romram.ldi>
3553 # Memory layout header file
3555 cdl_option CYGHWR_MEMORY_LAYOUT_H {
3556 # Calculated value: "<pkgconf/mlt_arm_tx53_romram.h>"
3558 # Current_value: <pkgconf/mlt_arm_tx53_romram.h>
3567 # Common types and useful macros.
3568 # Tracing and assertion facilities.
3569 # Package startup options.
3571 cdl_package CYGPKG_INFRA {
3572 # Packages cannot be added or removed, nor can their version be changed,
3573 # simply by editing their value. Instead the appropriate configuration
3574 # should be used to perform these actions.
3576 # This value cannot be modified here.
3578 # Current value: 1 current
3580 # The following properties are affected by this value
3581 # package CYGPKG_HAL
3582 # Requires: CYGPKG_INFRA
3583 # component CYGBLD_BUILD_REDBOOT
3584 # Requires: CYGPKG_INFRA
3589 # The eCos source code contains a significant amount of
3590 # internal debugging support, in the form of assertions and
3592 # Assertions check at runtime that various conditions are as
3593 # expected; if not, execution is halted.
3594 # Tracing takes the form of text messages that are output
3595 # whenever certain events occur, or whenever functions are
3597 # The most important property of these checks and messages is
3598 # that they are not required for the program to run.
3599 # It is prudent to develop software with assertions enabled,
3600 # but disable them when making a product release, thus
3601 # removing the overhead of that checking.
3602 # It is possible to enable assertions and tracing
3604 # There are also options controlling the exact behaviour of
3605 # the assertion and tracing facilities, thus giving users
3606 # finer control over the code and data size requirements.
3608 cdl_component CYGPKG_INFRA_DEBUG {
3610 # No user value, uncomment the following line to provide one.
3612 # value_source default
3615 # The following properties are affected by this value
3616 # option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD
3617 # ActiveIf: CYGPKG_INFRA_DEBUG
3622 # If this option is defined, asserts in the code are tested.
3623 # Assert functions (CYG_ASSERT()) are defined in
3624 # 'include/cyg/infra/cyg_ass.h' within the 'install' tree.
3625 # If it is not defined, these result in no additional
3626 # object code and no checking of the asserted conditions.
3628 cdl_component CYGDBG_USE_ASSERTS {
3629 # This option is not active
3630 # The parent CYGPKG_INFRA_DEBUG is disabled
3633 # No user value, uncomment the following line to provide one.
3635 # value_source default
3637 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3638 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3641 # The following properties are affected by this value
3642 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3643 # Requires: CYGDBG_USE_ASSERTS
3644 # option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG
3645 # DefaultValue: 0 != CYGDBG_USE_ASSERTS
3650 # This option allows individual control of preconditions.
3651 # A precondition is one type of assert, which it is
3652 # useful to control separately from more general asserts.
3653 # The function is CYG_PRECONDITION(condition,msg).
3655 cdl_option CYGDBG_INFRA_DEBUG_PRECONDITIONS {
3656 # This option is not active
3657 # The parent CYGDBG_USE_ASSERTS is not active
3660 # No user value, uncomment the following line to provide one.
3662 # value_source default
3667 # This option allows individual control of postconditions.
3668 # A postcondition is one type of assert, which it is
3669 # useful to control separately from more general asserts.
3670 # The function is CYG_POSTCONDITION(condition,msg).
3672 cdl_option CYGDBG_INFRA_DEBUG_POSTCONDITIONS {
3673 # This option is not active
3674 # The parent CYGDBG_USE_ASSERTS is not active
3677 # No user value, uncomment the following line to provide one.
3679 # value_source default
3684 # This option allows individual control of loop invariants.
3685 # A loop invariant is one type of assert, which it is
3686 # useful to control separately from more general asserts,
3687 # particularly since a loop invariant is typically evaluated
3688 # a great many times when used correctly.
3689 # The function is CYG_LOOP_INVARIANT(condition,msg).
3691 cdl_option CYGDBG_INFRA_DEBUG_LOOP_INVARIANTS {
3692 # This option is not active
3693 # The parent CYGDBG_USE_ASSERTS is not active
3696 # No user value, uncomment the following line to provide one.
3698 # value_source default
3703 # All assertions within eCos contain a text message
3704 # which should give some information about the condition
3706 # These text messages will end up being embedded in the
3707 # application image and hence there is a significant penalty
3708 # in terms of image size.
3709 # It is possible to suppress the use of these messages by
3710 # disabling this option.
3711 # This results in smaller code size, but there is less
3712 # human-readable information if an assertion actually gets
3715 cdl_option CYGDBG_INFRA_DEBUG_ASSERT_MESSAGE {
3716 # This option is not active
3717 # The parent CYGDBG_USE_ASSERTS is not active
3720 # No user value, uncomment the following line to provide one.
3722 # value_source default
3728 # If this option is defined, tracing operations
3729 # result in output or logging, depending on other options.
3730 # This may have adverse effects on performance, if the time
3731 # taken to output message overwhelms the available CPU
3732 # power or output bandwidth.
3733 # Trace functions (CYG_TRACE()) are defined in
3734 # 'include/cyg/infra/cyg_trac.h' within the 'install' tree.
3735 # If it is not defined, these result in no additional
3736 # object code and no trace information.
3738 cdl_component CYGDBG_USE_TRACING {
3739 # This option is not active
3740 # The parent CYGPKG_INFRA_DEBUG is disabled
3743 # No user value, uncomment the following line to provide one.
3745 # value_source default
3747 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3748 # CYGINT_INFRA_DEBUG_TRACE_IMPL == 0
3751 # The following properties are affected by this value
3752 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE
3753 # ActiveIf: CYGDBG_USE_TRACING
3754 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP
3755 # ActiveIf: CYGDBG_USE_TRACING
3756 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT
3757 # ActiveIf: CYGDBG_USE_TRACING
3758 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT
3759 # ActiveIf: CYGDBG_USE_TRACING
3760 # option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT
3761 # ActiveIf: CYGDBG_USE_TRACING
3765 # Trace function reports
3766 # This option allows individual control of
3767 # function entry/exit tracing, independent of
3768 # more general tracing output.
3769 # This may be useful to remove clutter from a
3772 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_REPORTS {
3773 # This option is not active
3774 # The parent CYGDBG_USE_TRACING is not active
3775 # The parent CYGDBG_USE_TRACING is disabled
3778 # No user value, uncomment the following line to provide one.
3780 # value_source default
3785 # All trace calls within eCos contain a text message
3786 # which should give some information about the circumstances.
3787 # These text messages will end up being embedded in the
3788 # application image and hence there is a significant penalty
3789 # in terms of image size.
3790 # It is possible to suppress the use of these messages by
3791 # disabling this option.
3792 # This results in smaller code size, but there is less
3793 # human-readable information available in the trace output,
3794 # possibly only filenames and line numbers.
3796 cdl_option CYGDBG_INFRA_DEBUG_TRACE_MESSAGE {
3797 # This option is not active
3798 # The parent CYGDBG_USE_TRACING is not active
3799 # The parent CYGDBG_USE_TRACING is disabled
3802 # No user value, uncomment the following line to provide one.
3804 # value_source default
3809 # Trace output implementations
3811 cdl_interface CYGINT_INFRA_DEBUG_TRACE_IMPL {
3812 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL, inactive, disabled
3813 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE, inactive, disabled
3814 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY, inactive, disabled
3815 # Implemented by CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER, inactive, enabled
3816 # This option is not active
3817 # The parent CYGPKG_INFRA_DEBUG is disabled
3819 # This value cannot be modified here.
3823 # The following properties are affected by this value
3824 # component CYGDBG_USE_ASSERTS
3825 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3826 # component CYGDBG_USE_TRACING
3827 # Requires: 1 == CYGINT_INFRA_DEBUG_TRACE_IMPL
3831 # A null output module which is useful when
3832 # debugging interactively; the output routines
3833 # can be breakpointed rather than have them actually
3834 # 'print' something.
3836 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_NULL {
3837 # This option is not active
3838 # The parent CYGPKG_INFRA_DEBUG is disabled
3841 # No user value, uncomment the following line to provide one.
3843 # value_source default
3848 # An output module which produces simple output
3849 # from tracing and assertion events.
3851 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_SIMPLE {
3852 # This option is not active
3853 # The parent CYGPKG_INFRA_DEBUG is disabled
3856 # No user value, uncomment the following line to provide one.
3858 # value_source default
3863 # An output module which produces fancy output
3864 # from tracing and assertion events.
3866 cdl_option CYGDBG_INFRA_DEBUG_TRACE_ASSERT_FANCY {
3867 # This option is not active
3868 # The parent CYGPKG_INFRA_DEBUG is disabled
3871 # No user value, uncomment the following line to provide one.
3873 # value_source default
3878 # An output module which buffers output
3879 # from tracing and assertion events. The stored
3880 # messages are output when an assert fires, or
3881 # CYG_TRACE_PRINT() (defined in <cyg/infra/cyg_trac.h>)
3883 # Of course, there will only be stored messages
3884 # if tracing per se (CYGDBG_USE_TRACING)
3887 cdl_component CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER {
3888 # This option is not active
3889 # The parent CYGPKG_INFRA_DEBUG is disabled
3892 # No user value, uncomment the following line to provide one.
3894 # value_source default
3900 # The size of the trace buffer. This counts the number
3901 # of trace records stored. When the buffer fills it
3902 # either wraps, stops recording, or generates output.
3904 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE {
3905 # This option is not active
3906 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3907 # ActiveIf constraint: CYGDBG_USE_TRACING
3908 # CYGDBG_USE_TRACING == 0
3912 # No user value, uncomment the following line to provide one.
3914 # value_source default
3916 # Legal values: 5 to 65535
3919 # Wrap trace buffer when full
3920 # When the trace buffer has filled with records it
3921 # starts again at the beginning. Hence only the last
3922 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3925 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_WRAP {
3926 # This option is not active
3927 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3928 # ActiveIf constraint: CYGDBG_USE_TRACING
3929 # CYGDBG_USE_TRACING == 0
3933 # No user value, uncomment the following line to provide one.
3935 # value_source default
3939 # Halt trace buffer when full
3940 # When the trace buffer has filled with records it
3941 # stops recording. Hence only the first
3942 # CYGDBG_INFRA_DEBUG_TRACE_BUFFER_SIZE messages will
3945 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_HALT {
3946 # This option is not active
3947 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3948 # ActiveIf constraint: CYGDBG_USE_TRACING
3949 # CYGDBG_USE_TRACING == 0
3953 # No user value, uncomment the following line to provide one.
3955 # value_source default
3959 # Print trace buffer when full
3960 # When the trace buffer has filled with records it
3961 # prints the contents of the buffer. The buffer is then
3962 # emptied and the system continues.
3964 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT {
3965 # This option is not active
3966 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3967 # ActiveIf constraint: CYGDBG_USE_TRACING
3968 # CYGDBG_USE_TRACING == 0
3972 # No user value, uncomment the following line to provide one.
3974 # value_source default
3978 # Print trace buffer on assert fail
3979 # When an assertion fails the trace buffer will be
3980 # printed to the default diagnostic device.
3982 cdl_option CYGDBG_INFRA_DEBUG_TRACE_BUFFER_PRINT_ON_ASSERT {
3983 # This option is not active
3984 # The parent CYGDBG_INFRA_DEBUG_TRACE_ASSERT_BUFFER is not active
3985 # ActiveIf constraint: CYGDBG_USE_TRACING
3986 # CYGDBG_USE_TRACING == 0
3990 # No user value, uncomment the following line to provide one.
3992 # value_source default
3997 # Use function names
3998 # All trace and assert calls within eCos contain a
3999 # reference to the builtin macro '__PRETTY_FUNCTION__',
4000 # which evaluates to a string containing
4001 # the name of the current function.
4002 # This is useful when reading a trace log.
4003 # It is possible to suppress the use of the function name
4004 # by disabling this option.
4005 # This results in smaller code size, but there is less
4006 # human-readable information available in the trace output,
4007 # possibly only filenames and line numbers.
4009 cdl_option CYGDBG_INFRA_DEBUG_FUNCTION_PSEUDOMACRO {
4010 # This option is not active
4011 # The parent CYGPKG_INFRA_DEBUG is disabled
4014 # No user value, uncomment the following line to provide one.
4016 # value_source default
4022 # Some packages require a startup routine to be called.
4023 # This can be carried out by application code, by supplying
4024 # a routine called cyg_package_start() which calls the
4025 # appropriate package startup routine(s).
4026 # Alternatively, this routine can be constructed automatically
4027 # and configured to call the startup routines of your choice.
4029 cdl_component CYGPKG_INFRA_STARTUP {
4030 # There is no associated value.
4034 # Start uITRON subsystem
4035 # Generate a call to initialize the
4036 # uITRON compatibility subsystem
4037 # within the system version of cyg_package_start().
4038 # This enables compatibility with uITRON.
4039 # You must configure uITRON with the correct tasks before
4040 # starting the uItron subsystem.
4041 # If this is disabled, and you want to use uITRON,
4042 # you must call cyg_uitron_start() from your own
4043 # cyg_package_start() or cyg_userstart().
4045 cdl_option CYGSEM_START_UITRON_COMPATIBILITY {
4046 # This option is not active
4047 # ActiveIf constraint: CYGPKG_UITRON
4048 # CYGPKG_UITRON (unknown) == 0
4052 # No user value, uncomment the following line to provide one.
4054 # value_source default
4056 # Requires: CYGPKG_UITRON
4057 # CYGPKG_UITRON (unknown) == 0
4062 # Smaller slower memcpy()
4063 # Enabling this option causes the implementation of
4064 # the standard memcpy() routine to reduce code
4065 # size at the expense of execution speed. This
4066 # option is automatically enabled with the use of
4067 # the -Os option to the compiler. Also note that
4068 # the compiler will try to use its own builtin
4069 # version of memcpy() if possible, ignoring the
4070 # implementation in this package, unless given
4071 # the -fno-builtin compiler option.
4073 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMCPY {
4075 # No user value, uncomment the following line to provide one.
4077 # value_source default
4081 # Smaller slower memset()
4082 # Enabling this option causes the implementation of
4083 # the standard memset() routine to reduce code
4084 # size at the expense of execution speed. This
4085 # option is automatically enabled with the use of
4086 # the -Os option to the compiler. Also note that
4087 # the compiler will try to use its own builtin
4088 # version of memset() if possible, ignoring the
4089 # implementation in this package, unless given
4090 # the -fno-builtin compiler option.
4092 cdl_option CYGIMP_INFRA_PREFER_SMALL_TO_FAST_MEMSET {
4094 # No user value, uncomment the following line to provide one.
4096 # value_source default
4100 # Provide empty C++ delete functions
4101 # To deal with virtual destructors, where the correct delete()
4102 # function must be called for the derived class in question, the
4103 # underlying delete is called when needed, from destructors. This
4104 # is regardless of whether the destructor is called by delete itself.
4105 # So there is a reference to delete() from all destructors. The
4106 # default builtin delete() attempts to call free() if there is
4107 # one defined. So, if you have destructors, and you have free(),
4108 # as in malloc() and free(), any destructor counts as a reference
4109 # to free(). So the dynamic memory allocation code is linked
4110 # in regardless of whether it gets explicitly called. This
4111 # increases code and data size needlessly.
4112 # To defeat this undesirable behaviour, we define empty versions
4113 # of delete and delete. But doing this prevents proper use
4114 # of dynamic memory in C++ programs via C++'s new and delete
4116 # Therefore, this option is provided
4117 # for explicitly disabling the provision of these empty functions,
4118 # so that new and delete can be used, if that is what is required.
4120 cdl_option CYGFUN_INFRA_EMPTY_DELETE_FUNCTIONS {
4122 # No user value, uncomment the following line to provide one.
4124 # value_source default
4128 # Threshold for valid number of delete calls
4129 # Some users don't know about the empty delete function and then
4130 # wonder why their C++ classes are leaking memory. If
4131 # INFRA_DEBUG is enabled we keep a counter for the number of
4132 # times delete is called. If it goes above this threshold we throw
4133 # an assertion failure. This should point heavy users of
4134 # delete in the right direction without upsetting those who want
4135 # an empty delete function.
4137 cdl_option CYGNUM_INFRA_EMPTY_DELETE_THRESHOLD {
4138 # This option is not active
4139 # ActiveIf constraint: CYGPKG_INFRA_DEBUG
4140 # CYGPKG_INFRA_DEBUG == 0
4144 # No user value, uncomment the following line to provide one.
4146 # value_source default
4147 # Default value: 100
4150 # Provide dummy abort() function
4151 # This option controls the inclusion of a dummy abort() function.
4152 # Parts of the C and C++ compiler runtime systems contain references
4153 # to abort(), particulary in the C++ exception handling code. It is
4154 # not possible to eliminate these references, so this dummy function
4155 # in included to satisfy them. It is not expected that this function
4156 # will ever be called, so its current behaviour is to simply loop.
4158 cdl_option CYGFUN_INFRA_DUMMY_ABORT {
4160 # No user value, uncomment the following line to provide one.
4162 # value_source default
4163 # Default value: CYGINT_ISO_EXIT == 0
4164 # CYGINT_ISO_EXIT == 0
4166 # Requires: !CYGINT_ISO_EXIT
4167 # CYGINT_ISO_EXIT == 0
4171 # Reset platform at end of test case execution
4172 # If this option is set then test case programs will reset the platform
4173 # when they terminate, as opposed to the default which is to just hang
4176 cdl_option CYGSEM_INFRA_RESET_ON_TEST_EXIT {
4178 # No user value, uncomment the following line to provide one.
4180 # value_source default
4184 # Provide dummy strlen() function
4185 # This option controls the inclusion of a dummy strlen() function.
4186 # Parts of the C and C++ compiler runtime systems contain references
4187 # to strlen(), particulary in the C++ exception handling code. It is
4188 # not possible to eliminate these references, so this dummy function
4189 # in included to satisfy them. While it is not expected that this function
4190 # will ever be called, it is functional but uses the simplest, smallest
4191 # algorithm. There is a faster version of strlen() in the C library.
4193 cdl_option CYGFUN_INFRA_DUMMY_STRLEN {
4195 # No user value, uncomment the following line to provide one.
4197 # value_source default
4198 # Default value: CYGINT_ISO_STRING_STRFUNCS == 0
4199 # CYGINT_ISO_STRING_STRFUNCS == 1
4201 # Requires: !CYGINT_ISO_STRING_STRFUNCS
4202 # CYGINT_ISO_STRING_STRFUNCS == 1
4206 # Make all compiler warnings show as errors
4207 # Enabling this option will cause all compiler warnings to show
4208 # as errors and bring the library build to a halt. This is used
4209 # to ensure that the code base is warning free, and thus ensure
4210 # that newly introduced warnings stand out and get fixed before
4211 # they show up as weird run-time behavior.
4213 cdl_option CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS {
4218 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -Werror")
4219 # CYGBLD_GLOBAL_CFLAGS == "-mabi=aapcs-linux -msoft-float -march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4222 # The following properties are affected by this value
4223 # option CYGBLD_GLOBAL_CFLAGS
4224 # Requires: CYGBLD_INFRA_CFLAGS_WARNINGS_AS_ERRORS
4227 # Make compiler and assembler communicate by pipe
4228 # Enabling this option will cause the compiler to feed the
4229 # assembly output the the assembler via a pipe instead of
4230 # via a temporary file. This normally reduces the build
4233 cdl_option CYGBLD_INFRA_CFLAGS_PIPE {
4238 # Requires: is_substr(CYGBLD_GLOBAL_CFLAGS, " -pipe")
4239 # CYGBLD_GLOBAL_CFLAGS == "-mabi=aapcs-linux -msoft-float -march=armv7-a -Wall -Wno-pointer-sign -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -O2 -ffunction-sections -fdata-sections -fno-exceptions -fvtable-gc -finit-priority -Werror -pipe"
4243 # Infra build options
4244 # Package specific build options including control over
4245 # compiler flags used only in building this package.
4247 cdl_component CYGPKG_INFRA_OPTIONS {
4248 # There is no associated value.
4252 # Additional compiler flags
4253 # This option modifies the set of compiler flags for
4254 # building the eCos infra package. These flags are used
4255 # in addition to the set of global flags.
4257 cdl_option CYGPKG_INFRA_CFLAGS_ADD {
4259 # No user value, uncomment the following line to provide one.
4260 # user_value "-fno-rtti -Woverloaded-virtual"
4261 # value_source default
4262 # Default value: "-fno-rtti -Woverloaded-virtual"
4265 # Suppressed compiler flags
4266 # This option modifies the set of compiler flags for
4267 # building the eCos infra package. These flags are removed from
4268 # the set of global flags if present.
4270 cdl_option CYGPKG_INFRA_CFLAGS_REMOVE {
4272 # No user value, uncomment the following line to provide one.
4273 # user_value -Wno-pointer-sign
4274 # value_source default
4275 # Default value: -Wno-pointer-sign
4278 # Suppressed linker flags
4279 # This option modifies the set of linker flags for
4280 # building the eCos infra package tests. These flags are removed from
4281 # the set of global flags if present.
4283 cdl_option CYGPKG_INFRA_LDFLAGS_REMOVE {
4285 # No user value, uncomment the following line to provide one.
4286 # user_value -Wl,--gc-sections
4287 # value_source default
4288 # Default value: -Wl,--gc-sections
4291 # Additional linker flags
4292 # This option modifies the set of linker flags for
4293 # building the eCos infra package tests. These flags are added to
4294 # the set of global flags if present.
4296 cdl_option CYGPKG_INFRA_LDFLAGS_ADD {
4298 # No user value, uncomment the following line to provide one.
4299 # user_value -Wl,--fatal-warnings
4300 # value_source default
4301 # Default value: -Wl,--fatal-warnings
4304 # Infra package tests
4306 cdl_component CYGPKG_INFRA_TESTS {
4307 # Calculated value: "tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2"
4309 # Current_value: tests/cxxsupp tests/diag_sprintf1 tests/diag_sprintf2
4313 # Number of times a test runs
4314 # This option controls the number of times tests will execute their
4315 # basic function. Not all tests will honor this setting, but those
4316 # that do will execute the test N times before terminating. A value
4317 # less than 0 indicates to run forever.
4319 cdl_option CYGNUM_TESTS_RUN_COUNT {
4321 # No user value, uncomment the following line to provide one.
4323 # value_source default
4330 # Redboot ROM monitor
4331 # doc: ref/redboot.html
4332 # This package supports the Redboot [stand-alone debug monitor]
4333 # using eCos as the underlying board support mechanism.
4335 cdl_package CYGPKG_REDBOOT {
4336 # Packages cannot be added or removed, nor can their version be changed,
4337 # simply by editing their value. Instead the appropriate configuration
4338 # should be used to perform these actions.
4340 # This value cannot be modified here.
4342 # Current value: 1 current
4343 # Requires: CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4344 # CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK == 0
4347 # The following properties are affected by this value
4348 # component CYGPKG_REDBOOT_ARM_OPTIONS
4349 # ActiveIf: CYGPKG_REDBOOT
4350 # component CYGPKG_REDBOOT_HAL_OPTIONS
4351 # ActiveIf: CYGPKG_REDBOOT
4352 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
4353 # ActiveIf: CYGPKG_REDBOOT
4354 # option CYGSEM_IO_ETH_DRIVERS_WARN
4355 # ActiveIf: CYGPKG_REDBOOT
4359 # Include support for ELF file format
4361 cdl_component CYGSEM_REDBOOT_ELF {
4363 # No user value, uncomment the following line to provide one.
4365 # value_source default
4370 # Use the virtual address in the ELF headers
4371 # The ELF headers contain both a virtual and a physical address
4372 # for where code/data should be loaded. By default the physical
4373 # address is used but sometimes it is necassary to use the
4374 # virtual address because of bugy toolchains
4376 cdl_option CYGOPT_REDBOOT_ELF_VIRTUAL_ADDRESS {
4378 # No user value, uncomment the following line to provide one.
4380 # value_source default
4385 # Methods of loading images using redboot
4387 cdl_interface CYGINT_REDBOOT_LOAD_METHOD {
4388 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM, active, enabled
4389 # Implemented by CYGPKG_REDBOOT_NETWORKING, active, enabled
4390 # This value cannot be modified here.
4394 # The following properties are affected by this value
4395 # component CYGBLD_BUILD_REDBOOT
4396 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4399 # Build Redboot ROM ELF image
4400 # This option enables the building of the Redboot ELF image.
4401 # The image may require further relocation or symbol
4402 # stripping before being converted to a binary image.
4403 # This is handled by a rule in the target CDL.
4405 cdl_component CYGBLD_BUILD_REDBOOT {
4407 # No user value, uncomment the following line to provide one.
4409 # The inferred value should not be edited directly.
4411 # value_source inferred
4413 # Requires: CYGPKG_INFRA
4414 # CYGPKG_INFRA == current
4416 # Requires: CYGPKG_ISOINFRA
4417 # CYGPKG_ISOINFRA == current
4419 # Requires: ! CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT
4420 # CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT == 0
4422 # Requires: ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
4423 # CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT == 0
4425 # Requires: ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
4426 # CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM == 0
4428 # Requires: CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
4429 # CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT == 1
4431 # Requires: CYGINT_ISO_STRING_MEMFUNCS
4432 # CYGINT_ISO_STRING_MEMFUNCS == 1
4434 # Requires: CYGINT_ISO_STRING_STRFUNCS
4435 # CYGINT_ISO_STRING_STRFUNCS == 1
4437 # Requires: CYGINT_REDBOOT_LOAD_METHOD
4438 # CYGINT_REDBOOT_LOAD_METHOD == 2
4441 # The following properties are affected by this value
4442 # package CYGPKG_HAL_ARM_TX53KARO
4443 # Requires: CYGBLD_BUILD_REDBOOT == 1
4444 # option CYGBLD_BUILD_REDBOOT_BIN
4445 # ActiveIf: CYGBLD_BUILD_REDBOOT
4449 # Include GDB support in RedBoot
4450 # RedBoot normally includes support for the GDB debugging
4451 # protocols. This option allows this to be disabled which
4452 # may yield a substantial savings in terms of code and memory
4455 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GDB {
4456 # ActiveIf constraint: CYGINT_HAL_DEBUG_GDB_STUBS
4457 # CYGINT_HAL_DEBUG_GDB_STUBS == 1
4462 # The inferred value should not be edited directly.
4466 # Requires: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
4467 # CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS == 0
4469 # Requires: CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
4470 # CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT == 0
4474 # Threads debugging support
4475 # Enabling this option will include special code in the
4476 # GDB stubs to support debugging of threaded programs. In
4477 # the case of eCos programs, this support allows GDB to
4478 # have complete access to the eCos threads in the
4481 cdl_option CYGBLD_BUILD_REDBOOT_WITH_THREADS {
4482 # ActiveIf constraint: CYG_HAL_STARTUP != "RAM"
4483 # CYG_HAL_STARTUP == ROMRAM
4487 # No user value, uncomment the following line to provide one.
4489 # value_source default
4491 # Requires: CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
4492 # CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT == 1
4496 # Customized version string
4497 # Use this option to define a customized version "string" for
4498 # RedBoot. Note: this value is only cosmetic, displayed by the
4499 # "version" command, but is useful for providing site specific
4500 # information about the RedBoot configuration.
4502 cdl_option CYGDAT_REDBOOT_CUSTOM_VERSION {
4504 # No user value, uncomment the following line to provide one.
4506 # The inferred value should not be edited directly.
4507 inferred_value 1 "Ka-Ro 2010-01-06"
4508 # value_source inferred
4509 # Default value: 0 0
4512 # Enable command line editing
4513 # If this option is non-zero, RedBoot will remember the
4514 # last N command lines. These lines may be reused.
4515 # Enabling this history will also enable rudimentary
4516 # editting of the lines themselves.
4518 cdl_option CYGNUM_REDBOOT_CMD_LINE_EDITING {
4520 # No user value, uncomment the following line to provide one.
4522 # value_source default
4525 # The following properties are affected by this value
4526 # option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES
4527 # ActiveIf: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4528 # option CYGBLD_REDBOOT_CMD_LINE_HISTORY
4529 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4532 # Enable command line editing using ANSI arrows, etc
4533 # If this option is enabled, RedBoot will accept standard ANSI key
4534 # sequences for cursor movement (along with the emacs style keys).
4536 cdl_option CYGSEM_REDBOOT_CMD_LINE_ANSI_SEQUENCES {
4537 # ActiveIf constraint: CYGNUM_REDBOOT_CMD_LINE_EDITING != 0
4538 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4542 # No user value, uncomment the following line to provide one.
4544 # value_source default
4548 # Enable history command and expansion
4549 # Enabling this option will allow RedBoot to provide a
4550 # history command to list previous commands. Also enables
4551 # history expansion via '!' character similar to bash
4554 cdl_option CYGBLD_REDBOOT_CMD_LINE_HISTORY {
4556 # No user value, uncomment the following line to provide one.
4558 # value_source default
4560 # Requires: CYGNUM_REDBOOT_CMD_LINE_EDITING > 0
4561 # CYGNUM_REDBOOT_CMD_LINE_EDITING == 16
4565 # Number of unique RAM segments on platform
4566 # Change this option to be the number of memory segments which are
4567 # supported by the platform. If the value is greater than 1, then
4568 # a platform specific function must provide information about the
4569 # additional segments.
4571 cdl_option CYGBLD_REDBOOT_MAX_MEM_SEGMENTS {
4573 # No user value, uncomment the following line to provide one.
4575 # value_source default
4579 # Include support gzip/zlib decompression
4581 cdl_component CYGBLD_BUILD_REDBOOT_WITH_ZLIB {
4582 # ActiveIf constraint: CYGPKG_COMPRESS_ZLIB
4583 # CYGPKG_COMPRESS_ZLIB == current
4587 # No user value, uncomment the following line to provide one.
4589 # value_source default
4592 # The following properties are affected by this value
4593 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
4594 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
4598 # Size of zlib decompression buffer
4599 # This is the size of the buffer filled with incoming data
4600 # during load before calls are made to the decompressor
4601 # function. For ethernet downloads this can be made bigger
4602 # (at the cost of memory), but for serial downloads on slow
4603 # processors it may be necessary to reduce the size to
4604 # avoid serial overruns. zlib appears to bail out if less
4605 # than five bytes are available initially so this is the
4608 cdl_option CYGNUM_REDBOOT_LOAD_ZLIB_BUFFER {
4610 # No user value, uncomment the following line to provide one.
4612 # value_source default
4614 # Legal values: 5 to 256
4617 # Support compression of Flash images
4618 # This CDL indicates whether flash images can
4619 # be decompressed from gzip/zlib format into RAM.
4621 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH {
4622 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4623 # CYGPKG_REDBOOT_FLASH == 1
4625 # ActiveIf constraint: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4626 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
4627 # CYGPRI_REDBOOT_ZLIB_FLASH_FORCE == 1
4630 # Calculated value: 1
4635 # Include GZIP uncompress command
4636 # Enable this option to include a 'gunzip' command
4637 # to uncompress GZIP compressed data.
4639 cdl_option CYGBLD_BUILD_REDBOOT_WITH_GUNZIP {
4641 # No user value, uncomment the following line to provide one.
4643 # value_source default
4647 # Turn on CYGPRI_REDBOOT_ZLIB_FLASH
4648 # Force CYGPRI_REDBOOT_ZLIB_FLASH to be chosen
4650 cdl_option CYGPRI_REDBOOT_ZLIB_FLASH_FORCE {
4652 # No user value, uncomment the following line to provide one.
4654 # The inferred value should not be edited directly.
4656 # value_source inferred
4659 # The following properties are affected by this value
4660 # option CYGPRI_REDBOOT_ZLIB_FLASH
4661 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
4665 # Include support for xyzModem downloads
4666 # doc: ref/download-command.html
4668 cdl_option CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM {
4670 # No user value, uncomment the following line to provide one.
4672 # value_source default
4675 # The following properties are affected by this value
4676 # option CYGPKG_REDBOOT_CFLAGS_ADD
4677 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4680 # Additional compiler flags
4681 # This option modifies the set of compiler flags for
4682 # building the eCos infra package. These flags are used
4683 # in addition to the set of global flags.
4685 cdl_option CYGPKG_REDBOOT_CFLAGS_ADD {
4686 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM
4687 # CYGBLD_BUILD_REDBOOT_WITH_XYZMODEM == 1
4691 # No user value, uncomment the following line to provide one.
4692 # user_value -Wno-inline
4693 # value_source default
4694 # Default value: -Wno-inline
4697 # Allow the load-command write into Flash.
4698 # Write images direct to Flash via the load command.
4699 # We assume anything which is invalid RAM is flash, hence
4700 # the requires statement
4702 cdl_option CYGBLD_REDBOOT_LOAD_INTO_FLASH {
4703 # ActiveIf constraint: CYGPKG_REDBOOT_FLASH
4704 # CYGPKG_REDBOOT_FLASH == 1
4708 # No user value, uncomment the following line to provide one.
4710 # value_source default
4712 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
4713 # CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS == 1
4717 # Include MS Windows CE support
4718 # doc: ref/wince.html
4719 # This option enables MS Windows CE EShell support
4720 # and Windows CE .BIN images support
4722 cdl_option CYGBLD_BUILD_REDBOOT_WITH_WINCE_SUPPORT {
4729 # Include support for MXC USB downloads
4731 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MXCUSB {
4733 # No user value, uncomment the following line to provide one.
4735 # value_source default
4739 # Include support for i.MX USB OTG downloads
4741 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IMXOTG {
4743 # No user value, uncomment the following line to provide one.
4745 # value_source default
4749 # Include POSIX checksum command
4750 # doc: ref/cksum-command.html
4752 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CKSUM {
4754 # No user value, uncomment the following line to provide one.
4756 # value_source default
4760 # Include memory fill command
4761 # doc: ref/mfill-command.html
4763 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MFILL {
4765 # No user value, uncomment the following line to provide one.
4767 # value_source default
4771 # Include memory compare command
4772 # doc: ref/mcmp-command.html
4774 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCMP {
4776 # No user value, uncomment the following line to provide one.
4778 # value_source default
4782 # Include memory copy command
4783 # doc: ref/mcopy-command.html
4785 cdl_option CYGBLD_BUILD_REDBOOT_WITH_MCOPY {
4787 # No user value, uncomment the following line to provide one.
4789 # value_source default
4793 # Include memory dump command
4794 # doc: ref/dump-command.html
4796 cdl_option CYGBLD_BUILD_REDBOOT_WITH_DUMP {
4798 # No user value, uncomment the following line to provide one.
4800 # value_source default
4804 # Include cache command
4805 # doc: ref/cache-command.html
4807 cdl_option CYGBLD_BUILD_REDBOOT_WITH_CACHES {
4809 # No user value, uncomment the following line to provide one.
4811 # value_source default
4815 # Include exec command
4816 # doc: ref/exec-command.html
4818 cdl_option CYGBLD_BUILD_REDBOOT_WITH_EXEC {
4820 # No user value, uncomment the following line to provide one.
4822 # value_source default
4825 # The following properties are affected by this value
4826 # component CYGPKG_REDBOOT_ARM_LINUX_EXEC
4827 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_EXEC
4830 # Include I/O Memory commands 'iopeek' and 'iopoke'
4832 cdl_option CYGBLD_BUILD_REDBOOT_WITH_IOMEM {
4834 # No user value, uncomment the following line to provide one.
4836 # value_source default
4840 # Granularity of timer/ticks
4841 # This option controls the granularity of the timers.
4842 # Faster CPUs can afford higher granularity (lower values)
4843 # which should give higher network performance since the stack
4846 cdl_option CYGDBG_REDBOOT_TICK_GRANULARITY {
4848 # No user value, uncomment the following line to provide one.
4850 # value_source default
4851 # Default value: 250
4852 # Legal values: 10 25 50 100 250 500 1000
4855 # Redboot Networking
4856 # This option includes networking support in RedBoot.
4858 cdl_component CYGPKG_REDBOOT_NETWORKING {
4859 # ActiveIf constraint: CYGPKG_IO_ETH_DRIVERS
4860 # CYGPKG_IO_ETH_DRIVERS == current
4864 # No user value, uncomment the following line to provide one.
4866 # value_source default
4869 # The following properties are affected by this value
4870 # option CYGSEM_IO_ETH_DRIVERS_PASS_PACKETS
4871 # DefaultValue: 0 != CYGPKG_REDBOOT_NETWORKING
4875 # Print net debug information
4876 # This option is overriden by the configuration stored
4879 cdl_option CYGDBG_REDBOOT_NET_DEBUG {
4881 # No user value, uncomment the following line to provide one.
4883 # value_source default
4887 # Support TFTP for download
4888 # This option enables the use of the TFTP protocol for
4891 cdl_option CYGSEM_REDBOOT_NET_TFTP_DOWNLOAD {
4893 # No user value, uncomment the following line to provide one.
4895 # value_source default
4899 # Support HTTP for download
4900 # This option enables the use of the HTTP protocol for
4903 cdl_option CYGSEM_REDBOOT_NET_HTTP_DOWNLOAD {
4910 # Default IP address
4911 # This IP address is the default used by RedBoot if
4912 # a BOOTP/DHCP server does not respond. The numbers
4913 # should be separated by *commas*, and not dots. If
4914 # an IP address is configured into the Flash
4915 # configuration, that will be used in preference.
4917 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR {
4919 # No user value, uncomment the following line to provide one.
4921 # value_source default
4922 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4923 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4928 # Do not try to use BOOTP
4929 # By default Redboot tries to use BOOTP to get an IP
4930 # address. If there's no BOOTP server on your network
4931 # use this option to avoid to wait until the
4932 # timeout. This option is overriden by the
4933 # configuration stored in flash.
4935 cdl_option CYGSEM_REDBOOT_DEFAULT_NO_BOOTP {
4936 # This option is not active
4937 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4940 # No user value, uncomment the following line to provide one.
4942 # value_source default
4946 # Default bootp server
4947 # This IP address is the default server
4948 # address used by RedBoot if a BOOTP/DHCP
4949 # server does not respond. The numbers should
4950 # be separated by *commas*, and not dots. If
4951 # an IP address is configured into the Flash
4952 # configuration, that will be used in
4955 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR {
4956 # This option is not active
4957 # The parent CYGDAT_REDBOOT_DEFAULT_IP_ADDR is disabled
4960 # No user value, uncomment the following line to provide one.
4962 # value_source default
4963 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
4964 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
4969 # Use DHCP to get IP information
4970 # Use DHCP protocol to obtain pertinent IP addresses, such
4971 # as the client, server, gateway, etc.
4973 cdl_component CYGSEM_REDBOOT_NETWORKING_DHCP {
4975 # No user value, uncomment the following line to provide one.
4977 # value_source default
4980 # The following properties are affected by this value
4981 # component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY
4982 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4985 # Use a gateway for non-local IP traffic
4986 # Enabling this option will allow the RedBoot networking
4987 # stack to use a [single] gateway to reach a non-local
4988 # IP address. If disabled, RedBoot will only be able to
4989 # reach nodes on the same subnet.
4991 cdl_component CYGSEM_REDBOOT_NETWORKING_USE_GATEWAY {
4993 # No user value, uncomment the following line to provide one.
4995 # value_source default
4997 # Requires: CYGSEM_REDBOOT_NETWORKING_DHCP
4998 # CYGSEM_REDBOOT_NETWORKING_DHCP == 1
5003 # Default gateway IP address
5004 # This IP address is the default used by RedBoot
5005 # if a BOOTP/DHCP server does not respond. The
5006 # numbers should be separated by *commas*, and
5007 # not dots. If an IP address is configured into
5008 # the Flash configuration, that will be used in
5011 cdl_component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR {
5013 # No user value, uncomment the following line to provide one.
5015 # value_source default
5016 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5017 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5021 # Default IP address mask
5022 # This IP address mask is the default used by
5023 # RedBoot if a BOOTP/DHCP server does not
5024 # respond. The numbers should be separated by
5025 # *commas*, and not dots. If an IP address is
5026 # configured into the Flash configuration, that
5027 # will be used in preference.
5029 cdl_component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK {
5031 # No user value, uncomment the following line to provide one.
5033 # value_source default
5034 # Default value: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5035 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5040 # TCP port to listen for incoming connections
5041 # RedBoot will 'listen' on this port for incoming TCP
5042 # connections. This allows outside connections to be made
5043 # to the platform, either for GDB or RedBoot commands.
5045 cdl_option CYGNUM_REDBOOT_NETWORKING_TCP_PORT {
5047 # No user value, uncomment the following line to provide one.
5049 # value_source default
5050 # Default value: 9000
5053 # Number of [network] packet buffers
5054 # RedBoot may need to buffer network data to support
5055 # various connections. This option allows control
5056 # over the number of such buffered packets, and in
5057 # turn, controls the amount of memory used by RedBoot
5058 # (which is not available to user applications).
5059 # Each packet buffer takes up about 1514 bytes.
5060 # Note: there is little need to make this larger than
5063 cdl_option CYGNUM_REDBOOT_NETWORKING_MAX_PKTBUF {
5065 # No user value, uncomment the following line to provide one.
5067 # value_source default
5069 # Legal values: 3 to 8
5073 # When this option is enabled, RedBoot will be built with
5074 # support for DNS, allowing use of hostnames on the command
5077 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS {
5078 # This option is not active
5079 # ActiveIf constraint: CYGPKG_NS_DNS
5080 # CYGPKG_NS_DNS (unknown) == 0
5084 # No user value, uncomment the following line to provide one.
5086 # value_source default
5088 # Requires: !CYGPKG_NS_DNS_BUILD
5089 # CYGPKG_NS_DNS_BUILD (unknown) == 0
5095 # This option sets the IP of the default DNS. The IP can be
5096 # changed at runtime as well.
5098 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_IP {
5099 # This option is not active
5100 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5101 # ActiveIf constraint: !CYGSEM_REDBOOT_FLASH_CONFIG
5102 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5106 # No user value, uncomment the following line to provide one.
5107 # user_value 0.0.0.0
5108 # value_source default
5109 # Default value: 0.0.0.0
5112 # Timeout in DNS lookup
5113 # This option sets the timeout used when looking up an
5114 # address via the DNS. Default is 10 seconds.
5116 cdl_option CYGNUM_REDBOOT_NETWORKING_DNS_TIMEOUT {
5117 # This option is not active
5118 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5121 # No user value, uncomment the following line to provide one.
5123 # value_source default
5127 # Support the use of a domain name
5128 # This option controls if Redboot supports domain
5129 # names when performing DNS lookups
5131 cdl_component CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN {
5132 # This option is not active
5133 # The parent CYGPKG_REDBOOT_NETWORKING_DNS is not active
5136 # No user value, uncomment the following line to provide one.
5138 # value_source default
5143 # Default DNS domain
5144 # This option sets the default DNS domain name.
5145 # This value will be overwritten by the value in
5146 # flash or a domain returned by DHCP
5148 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DEFAULT_DOMAIN {
5149 # This option is not active
5150 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5151 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5154 # No user value, uncomment the following line to provide one.
5156 # value_source default
5157 # Default value: 0 0
5160 # Get DNS domain from Flash
5161 # This option enables getting the domain name
5162 # from the flash configuration. This can later be
5163 # overwritten by a value learnt from DHCP
5165 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN {
5166 # This option is not active
5167 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5168 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5169 # ActiveIf constraint: CYGSEM_REDBOOT_FLASH_CONFIG
5170 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
5174 # No user value, uncomment the following line to provide one.
5176 # value_source default
5180 # Use DNS domain from DHCP
5181 # This option enables the use of the domain name
5184 cdl_option CYGPKG_REDBOOT_NETWORKING_DNS_DHCP_DOMAIN {
5185 # This option is not active
5186 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5187 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5190 # No user value, uncomment the following line to provide one.
5192 # value_source default
5196 # BOOTP/DHCP DNS domain buffer size
5197 # This options sets the size of the static
5198 # buffer used by BOOTP/DHCP to store the DNS
5199 # domain name. The domain name will not be
5200 # set if the buffer is too small to hold it.
5202 cdl_option CYGNUM_REDBOOT_NETWORK_DNS_DOMAIN_BUFSIZE {
5203 # This option is not active
5204 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is not active
5205 # The parent CYGPKG_REDBOOT_NETWORKING_DNS_WITH_DOMAIN is disabled
5208 # No user value, uncomment the following line to provide one.
5210 # value_source default
5216 # Default network device driver
5217 # This is the name of the default network device to use.
5219 cdl_option CYGDAT_REDBOOT_DEFAULT_NETWORK_DEVICE {
5220 # This option is not active
5221 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5222 # CYGHWR_NET_DRIVERS == 1
5226 # No user value, uncomment the following line to provide one.
5228 # value_source default
5229 # Default value: "\"\""
5232 # Initialize only one net device
5233 # This option tells RedBoot to stop initializing network
5234 # devices when it finds the first device which is
5235 # successfully initialized. The default behavior causes
5236 # all network devices to be initialized.
5238 cdl_option CYGSEM_REDBOOT_NETWORK_INIT_ONE_DEVICE {
5239 # This option is not active
5240 # ActiveIf constraint: CYGHWR_NET_DRIVERS > 1
5241 # CYGHWR_NET_DRIVERS == 1
5245 # No user value, uncomment the following line to provide one.
5247 # value_source default
5252 # Let RedBoot use any I/O channel for its console.
5253 # If this option is enabled then RedBoot will attempt to use all
5254 # defined serial I/O channels for its console device. Once input
5255 # arrives at one of these channels then the console will use only
5258 cdl_option CYGPKG_REDBOOT_ANY_CONSOLE {
5260 # No user value, uncomment the following line to provide one.
5262 # The inferred value should not be edited directly.
5264 # value_source inferred
5268 # Let RedBoot adjust the baud rate of the serial console.
5269 # If this option is enabled then RedBoot will support commands
5270 # to set and query the baud rate on the selected console.
5272 cdl_option CYGSEM_REDBOOT_VARIABLE_BAUD_RATE {
5273 # ActiveIf constraint: CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
5274 # CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT == 1
5278 # No user value, uncomment the following line to provide one.
5280 # value_source default
5284 # Run a platform specific startup function.
5285 # If this option is enabled then RedBoot will execute a platform
5286 # specific startup function before entering into its command line
5287 # processing. This allows the platform to perform any special
5288 # setups before RedBoot actually starts running. Note: the entire
5289 # RedBoot environment will already be initialized at this point.
5291 cdl_option CYGSEM_REDBOOT_PLF_STARTUP {
5293 # No user value, uncomment the following line to provide one.
5295 # value_source default
5299 # Run a platform specific ESA validation function.
5300 # If this option is enabled then RedBoot will execute a platform
5301 # specific function to validate an ethernet ESA. This would be
5302 # useful if the address must conform to standards set by the
5303 # hardware manufacturer, etc.
5305 cdl_option CYGSEM_REDBOOT_PLF_ESA_VALIDATE {
5307 # No user value, uncomment the following line to provide one.
5309 # The inferred value should not be edited directly.
5311 # value_source inferred
5314 # The following properties are affected by this value
5315 # component CYGPKG_DEVS_ETH_ARM_MXCBOARD_ETH0
5316 # Requires: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5317 # option CYGDAT_DEVS_ETH_ARM_TX53KARO_OUI
5318 # ActiveIf: CYGSEM_REDBOOT_PLF_ESA_VALIDATE
5321 # Maximum command line length
5322 # This option allows control over how long the CLI command line
5323 # should be. This space will be allocated statically
5324 # rather than from RedBoot's stack.
5326 cdl_option CYGPKG_REDBOOT_MAX_CMD_LINE {
5328 # No user value, uncomment the following line to provide one.
5330 # The inferred value should not be edited directly.
5332 # value_source inferred
5333 # Default value: 256
5336 # Command processing idle timeout (ms)
5337 # This option controls the timeout period before the
5338 # command processing is considered 'idle'. Making this
5339 # number smaller will cause idle processing to take place
5340 # more often, etc. The default value of 10ms is a reasonable
5341 # tradeoff between responsiveness and overhead.
5343 cdl_option CYGNUM_REDBOOT_CLI_IDLE_TIMEOUT {
5345 # No user value, uncomment the following line to provide one.
5347 # value_source default
5351 # Validate RAM addresses during load
5352 # This option controls whether or not RedBoot will make
5353 # sure that memory being used by the "load" command is
5354 # in fact in user RAM. Leaving the option enabled makes
5355 # for a safer environment, but this check may not be valid
5356 # on all platforms, thus the ability to disable it.
5357 # ** Disable this only with great care **
5359 cdl_option CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS {
5361 # No user value, uncomment the following line to provide one.
5363 # value_source default
5366 # The following properties are affected by this value
5367 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5368 # Requires: CYGSEM_REDBOOT_VALIDATE_USER_RAM_LOADS
5371 # Allow RedBoot to support FLASH programming
5372 # If this option is enabled then RedBoot will provide commands
5373 # to manage images in FLASH memory. These images can be loaded
5374 # into memory for execution or executed in place.
5376 cdl_component CYGPKG_REDBOOT_FLASH {
5377 # ActiveIf constraint: CYGHWR_IO_FLASH_DEVICE
5378 # CYGHWR_IO_FLASH_DEVICE == 1
5382 # No user value, uncomment the following line to provide one.
5384 # value_source default
5387 # The following properties are affected by this value
5388 # option CYGPRI_REDBOOT_ZLIB_FLASH
5389 # ActiveIf: CYGPKG_REDBOOT_FLASH
5390 # option CYGBLD_REDBOOT_LOAD_INTO_FLASH
5391 # ActiveIf: CYGPKG_REDBOOT_FLASH
5395 # Byte order used to store info in flash.
5396 # This option controls the byte ordering used to store
5397 # the FIS directory info and flash config info.
5399 cdl_option CYGOPT_REDBOOT_FLASH_BYTEORDER {
5401 # No user value, uncomment the following line to provide one.
5402 # user_value NATURAL
5403 # value_source default
5404 # Default value: NATURAL
5405 # Legal values: "NATURAL" "MSBFIRST" "LSBFIRST"
5408 # RedBoot Flash Image System support
5409 # doc: ref/flash-image-system.html
5410 # This option enables the Flash Image System commands
5411 # and support within RedBoot. If disabled, simple Flash
5412 # access commands such as "fis write" will still exist.
5413 # This option would be disabled for targets that need simple
5414 # FLASH manipulation, but do not have the need or space for
5415 # complete image management.
5417 cdl_option CYGOPT_REDBOOT_FIS {
5419 # No user value, uncomment the following line to provide one.
5421 # value_source default
5424 # The following properties are affected by this value
5425 # component CYGPKG_REDBOOT_FIS_CONTENTS
5426 # ActiveIf: CYGOPT_REDBOOT_FIS
5427 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5428 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5429 # component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER
5430 # ActiveIf: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
5433 # Max number of chunks of free space to manage
5434 # If this option is defined then "fis free" will
5435 # rely on the FIS directory to determine what space is
5436 # free within the FLASH. This option controls the
5437 # maximum number of free segment which can be handled
5438 # (typically this number is small). If this option is
5439 # not enabled, the the archaic behaviour of actually
5440 # scanning the FLASH for erased sectors (unreliable)
5441 # will be used to determine what's free and what's
5444 cdl_option CYGDAT_REDBOOT_FIS_MAX_FREE_CHUNKS {
5446 # No user value, uncomment the following line to provide one.
5448 # value_source default
5449 # Default value: 1 32
5452 # Flash Image System default directory contents
5454 cdl_component CYGPKG_REDBOOT_FIS_CONTENTS {
5455 # ActiveIf constraint: CYGOPT_REDBOOT_FIS
5456 # CYGOPT_REDBOOT_FIS == 1
5459 # Calculated value: 1
5465 # Flash block containing the Directory
5466 # Which block of flash should hold the directory
5467 # information. Positive numbers are absolute block
5468 # numbers. Negative block numbers count backwards
5469 # from the last block. eg 2 means block 2, -2
5470 # means the last but one block.
5472 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK {
5474 # No user value, uncomment the following line to provide one.
5476 # value_source default
5479 # The following properties are affected by this value
5480 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5481 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5482 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5485 # Redundant Flash Image System Directory Support
5486 # This option enables the use of a redundant FIS
5487 # directory within RedBoot. If enabled a flash block
5488 # will be reserved for a second copy of the fis
5489 # directory. Doing this allow for power failure safe
5490 # updates of the directory by the application.
5492 cdl_component CYGOPT_REDBOOT_REDUNDANT_FIS {
5494 # No user value, uncomment the following line to provide one.
5496 # value_source default
5498 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5499 # CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG == 1
5504 # Flash block containing the backup Directory
5505 # Which block of flash should hold the redundant
5506 # directory information. Positive numbers are
5507 # absolute block numbers. Negative block numbers
5508 # count backwards from the last block. eg 2 means
5509 # block 2, -2 means the last but one block.
5511 cdl_option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK {
5512 # This option is not active
5513 # The parent CYGOPT_REDBOOT_REDUNDANT_FIS is disabled
5516 # No user value, uncomment the following line to provide one.
5518 # value_source default
5520 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5521 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5522 # CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK == 0
5523 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK == -1
5526 # The following properties are affected by this value
5527 # option CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK
5528 # Requires: CYGNUM_REDBOOT_FIS_REDUNDANT_DIRECTORY_BLOCK !=
5529 # CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK
5533 # Pseudo-file to describe reserved area
5534 # If an area of FLASH is reserved, it is informative to
5535 # have a fis entry describing it. This option controls
5536 # creation of such an entry by default in the fis init
5539 cdl_option CYGOPT_REDBOOT_FIS_RESERVED_BASE {
5540 # This option is not active
5541 # ActiveIf constraint: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5542 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5546 # No user value, uncomment the following line to provide one.
5548 # value_source default
5552 # File to describe RedBoot boot image
5553 # Normally a ROM-startup RedBoot image is first in the
5554 # FLASH, and the system boots using that image. This
5555 # option controls creation of an entry describing it in
5556 # the fis init command. It might be disabled if a
5557 # platform has an immutable boot image of its own, where
5558 # we use a POST-startup RedBoot instead, which performs
5559 # less board initialization.
5561 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT {
5563 # No user value, uncomment the following line to provide one.
5565 # value_source default
5568 # The following properties are affected by this value
5569 # component CYGOPT_REDBOOT_FIS_REDBOOT_POST
5570 # DefaultValue: !CYGOPT_REDBOOT_FIS_REDBOOT
5571 # option CYGBLD_REDBOOT_MIN_IMAGE_SIZE
5572 # DefaultValue: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5575 # File to describe RedBoot POST-compatible image
5576 # This option controls creation of an entry describing a
5577 # POST-startup RedBoot image in the fis init command.
5578 # Not all platforms support POST-startup. A platform
5579 # might have both for testing purposes, where the
5580 # eventual user would substitute their own POST code for
5581 # the initial ROM-startup RedBoot, and then jump to the
5582 # POST-compatible RedBoot immediately following.
5584 cdl_component CYGOPT_REDBOOT_FIS_REDBOOT_POST {
5586 # No user value, uncomment the following line to provide one.
5588 # value_source default
5589 # Default value: !CYGOPT_REDBOOT_FIS_REDBOOT
5590 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5595 # Offset of POST image from FLASH start
5596 # This option specifies the offset for a POST image from
5597 # the start of FLASH. If unset, then the fis entry
5598 # describing the POST image will be placed where
5601 cdl_option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET {
5602 # This option is not active
5603 # The parent CYGOPT_REDBOOT_FIS_REDBOOT_POST is disabled
5606 # No user value, uncomment the following line to provide one.
5608 # value_source default
5609 # Default value: 0 0
5610 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5611 # CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET == 0
5612 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5615 # The following properties are affected by this value
5616 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5617 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5621 # File to describe RedBoot backup image
5622 # This option controls creation of an entry describing a
5623 # backup RedBoot image in the fis init command.
5624 # Conventionally a RAM-startup RedBoot image is kept
5625 # under this name for use in updating the ROM-based
5626 # RedBoot that boots the board.
5628 cdl_option CYGOPT_REDBOOT_FIS_REDBOOT_BACKUP {
5630 # No user value, uncomment the following line to provide one.
5632 # value_source default
5636 # Include ARM SIB ID in FIS
5637 # If set, this option will cause the last 5 words of
5638 # the FIS to include the special ID needed for the
5639 # flash to be recognized as a reserved area for RedBoot
5640 # by an ARM BootRom monitor.
5642 cdl_option CYGOPT_REDBOOT_FIS_DIRECTORY_ARM_SIB_ID {
5644 # No user value, uncomment the following line to provide one.
5646 # value_source default
5650 # Size of FIS directory entry
5651 # The FIS directory is limited to one single flash
5652 # sector. If your flash has tiny sectors, you may wish
5653 # to reduce this value in order to get more slots in
5654 # the FIS directory.
5656 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_SIZE {
5658 # No user value, uncomment the following line to provide one.
5660 # value_source default
5661 # Default value: 256
5664 # Number of FIS directory entries
5665 # The FIS directory normally occupies a single flash
5666 # sector. Adjusting this value can allow for more than
5667 # one flash sector to be used, which is useful if your
5668 # sectors are very small.
5670 cdl_option CYGNUM_REDBOOT_FIS_DIRECTORY_ENTRY_COUNT {
5672 # No user value, uncomment the following line to provide one.
5674 # value_source default
5678 # Maximum RedBoot image size
5679 # This option controls the maximum length reserved
5680 # for the RedBoot boot image in the FIS table.
5681 # This should be a multiple of the flash's erase
5684 cdl_option CYGBLD_REDBOOT_MIN_IMAGE_SIZE {
5686 # No user value, uncomment the following line to provide one.
5687 # user_value 0x00020000
5688 # The inferred value should not be edited directly.
5689 inferred_value 0x00040000
5690 # value_source inferred
5691 # Default value: CYGOPT_REDBOOT_FIS_REDBOOT ? 0x20000 : 0
5692 # CYGOPT_REDBOOT_FIS_REDBOOT == 1
5696 # Offset from start of FLASH to RedBoot boot image
5697 # This option controls where the RedBoot boot image is
5698 # located relative to the start of FLASH.
5700 cdl_option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET {
5702 # No user value, uncomment the following line to provide one.
5704 # value_source default
5705 # Default value: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5706 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5708 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5709 # CYGNUM_REDBOOT_FLASH_RESERVED_BASE == 0
5710 # CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5713 # The following properties are affected by this value
5714 # option CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET
5715 # Requires: CYGNUM_REDBOOT_FIS_REDBOOT_POST_OFFSET >= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5716 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5717 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5718 # component CYGPKG_HAL_ARM_TX53_OPTIONS
5719 # Requires: CYGBLD_REDBOOT_FLASH_BOOT_OFFSET == 0
5722 # Size of reserved area at start of FLASH
5723 # This option reserves an area at the start of
5724 # FLASH where RedBoot will never interfere; it is
5725 # expected that this area contains
5726 # (non-RedBoot-based) POST code or some other boot
5727 # monitor that executes before RedBoot.
5729 cdl_option CYGNUM_REDBOOT_FLASH_RESERVED_BASE {
5731 # No user value, uncomment the following line to provide one.
5733 # value_source default
5736 # The following properties are affected by this value
5737 # option CYGOPT_REDBOOT_FIS_RESERVED_BASE
5738 # ActiveIf: 0 != CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5739 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5740 # DefaultValue: CYGNUM_REDBOOT_FLASH_RESERVED_BASE
5741 # option CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5742 # Requires: CYGNUM_REDBOOT_FLASH_RESERVED_BASE <= CYGBLD_REDBOOT_FLASH_BOOT_OFFSET
5746 # Keep all RedBoot FLASH data blocks locked.
5747 # When this option is enabled, RedBoot will keep configuration
5748 # data and the FIS directory blocks implicitly locked. While
5749 # this is somewhat safer, it does add overhead during updates.
5751 cdl_option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL {
5752 # This option is not active
5753 # ActiveIf constraint: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
5754 # CYGHWR_IO_FLASH_BLOCK_LOCKING == 0
5758 # No user value, uncomment the following line to provide one.
5760 # value_source default
5764 # Use CRC checksums on FIS images.
5765 # When this option is enabled, RedBoot will use CRC checksums
5766 # when reading and writing flash images.
5768 cdl_option CYGSEM_REDBOOT_FIS_CRC_CHECK {
5770 # No user value, uncomment the following line to provide one.
5772 # The inferred value should not be edited directly.
5774 # value_source inferred
5778 # ARM FLASH drivers support SIB flash block structure
5779 # This interface is implemented by a flash driver
5780 # to indicate that it supports the ARM SIB flash
5783 cdl_interface CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED {
5784 # No options implement this inferface
5785 # ActiveIf constraint: CYGPKG_HAL_ARM
5786 # CYGPKG_HAL_ARM == current
5789 # This value cannot be modified here.
5793 # The following properties are affected by this value
5794 # option CYGHWR_REDBOOT_ARM_FLASH_SIB
5795 # ActiveIf: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5798 # Use ARM SIB flash block structure
5799 # This option is used to interpret ARM Flash System
5800 # information blocks.
5802 cdl_option CYGHWR_REDBOOT_ARM_FLASH_SIB {
5803 # This option is not active
5804 # ActiveIf constraint: CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED
5805 # CYGINT_REDBOOT_ARM_FLASH_SIB_SUPPORTED == 0
5809 # No user value, uncomment the following line to provide one.
5811 # value_source default
5816 # Keep RedBoot configuration data in FLASH
5817 # When this option is enabled, RedBoot will keep configuration
5818 # data in a separate block of FLASH memory. This data will
5819 # include such items as the node IP address or startup scripts.
5821 cdl_component CYGSEM_REDBOOT_FLASH_CONFIG {
5823 # No user value, uncomment the following line to provide one.
5825 # value_source default
5826 # Default value: CYGPKG_IO_FLASH != 0
5827 # CYGPKG_IO_FLASH == current
5830 # The following properties are affected by this value
5831 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR
5832 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5833 # option CYGDAT_REDBOOT_DEFAULT_BOOTP_SERVER_IP_ADDR
5834 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5835 # component CYGDAT_REDBOOT_DEFAULT_GATEWAY_IP_ADDR
5836 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "0, 0, 0, 0"
5837 # component CYGDAT_REDBOOT_DEFAULT_IP_ADDR_MASK
5838 # DefaultValue: CYGSEM_REDBOOT_FLASH_CONFIG ? 0 : "255, 255, 255, 0"
5839 # option CYGPKG_REDBOOT_NETWORKING_DNS_IP
5840 # ActiveIf: !CYGSEM_REDBOOT_FLASH_CONFIG
5841 # option CYGPKG_REDBOOT_NETWORKING_DNS_FCONFIG_DOMAIN
5842 # ActiveIf: CYGSEM_REDBOOT_FLASH_CONFIG
5843 # option CYGFUN_REDBOOT_BOOT_SCRIPT
5844 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
5848 # Length of configuration data in FLASH
5849 # This option is used to control the amount of memory and FLASH
5850 # to be used for configuration options (persistent storage).
5852 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_SIZE {
5854 # No user value, uncomment the following line to provide one.
5856 # value_source default
5857 # Default value: 4096
5860 # Style of media used for persistent data storage
5861 # Persistent data storage can either be held in 'norma' FLASH
5862 # or some other device (represented by the 'EEPROM' choice).
5863 # The different styles utilize different access methods.
5865 cdl_option CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA {
5867 # No user value, uncomment the following line to provide one.
5869 # value_source default
5870 # Default value: FLASH
5871 # Legal values: "FLASH" "EEPROM"
5873 # The following properties are affected by this value
5874 # option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5875 # ActiveIf: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5876 # option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK
5877 # DefaultValue: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5880 # Merged config data and FIS directory
5881 # If this option is set, then the FIS directory and FLASH
5882 # configuration database will be stored in the same physical
5885 cdl_option CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG {
5886 # ActiveIf constraint: CYGOPT_REDBOOT_FIS && (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5887 # CYGOPT_REDBOOT_FIS == 1
5888 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5892 # No user value, uncomment the following line to provide one.
5894 # value_source default
5897 # The following properties are affected by this value
5898 # component CYGOPT_REDBOOT_REDUNDANT_FIS
5899 # Requires: 0 == CYGSEM_REDBOOT_FLASH_COMBINED_FIS_AND_CONFIG
5902 # Which block of flash to use
5903 # Which block of flash should hold the configuration
5904 # information. Positive numbers are absolute block numbers.
5905 # Negative block numbers count backwards from the last block.
5906 # eg 2 means block 2, -2 means the last but one block.
5908 cdl_option CYGNUM_REDBOOT_FLASH_CONFIG_BLOCK {
5910 # No user value, uncomment the following line to provide one.
5912 # value_source default
5916 # Support simple macros/aliases in FLASH
5917 # This option is used to allow support for simple text-based
5918 # macros (aliases). These aliases are kept in the FLASH
5919 # configuration data (persistent storage).
5921 cdl_option CYGSEM_REDBOOT_FLASH_ALIASES {
5923 # No user value, uncomment the following line to provide one.
5925 # value_source default
5929 # Length of strings in FLASH configuration data
5930 # This option is used to control the amount of memory
5931 # and FLASH to be used for string configuration
5932 # options (persistent storage).
5934 cdl_option CYGNUM_REDBOOT_FLASH_STRING_SIZE {
5936 # No user value, uncomment the following line to provide one.
5938 # value_source default
5939 # Default value: 128
5942 # Length of configuration script(s) in FLASH
5943 # This option is used to control the amount of memory and
5944 # FLASH to be used for configuration options (persistent
5947 cdl_option CYGNUM_REDBOOT_FLASH_SCRIPT_SIZE {
5949 # No user value, uncomment the following line to provide one.
5951 # The inferred value should not be edited directly.
5953 # value_source inferred
5954 # Default value: 512
5957 # Fallback to read-only FLASH configuration
5958 # This option will cause the configuration information to
5959 # revert to the readonly information stored in the FLASH.
5960 # The option only takes effect after
5961 # 1) the config_ok flag has been set to be true,
5962 # indicating that at one time the copy in RAM was valid;
5964 # 2) the information in RAM has been verified to be invalid
5966 cdl_option CYGSEM_REDBOOT_FLASH_CONFIG_READONLY_FALLBACK {
5968 # No user value, uncomment the following line to provide one.
5970 # value_source default
5971 # Default value: (CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == "FLASH")
5972 # CYGHWR_REDBOOT_FLASH_CONFIG_MEDIA == FLASH
5977 # Allow RedBoot to support fileio
5978 # If this option is enabled then RedBoot will provide commands
5979 # to load files from fileio file systems such as JFFS2.
5981 cdl_component CYGPKG_REDBOOT_FILEIO {
5982 # This option is not active
5983 # ActiveIf constraint: CYGPKG_IO_FILEIO
5984 # CYGPKG_IO_FILEIO (unknown) == 0
5988 # No user value, uncomment the following line to provide one.
5990 # value_source default
5993 # The following properties are affected by this value
5994 # option CYGNUM_REDBOOT_GETC_BUFFER
5995 # DefaultValue: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
5999 # Include an ls command
6000 # If this option is enabled a simple ls command will be
6001 # included in redboot so the contents of a directory
6004 cdl_option CYGBLD_REDBOOT_FILEIO_WITH_LS {
6005 # This option is not active
6006 # The parent CYGPKG_REDBOOT_FILEIO is not active
6009 # No user value, uncomment the following line to provide one.
6011 # value_source default
6016 # Allow RedBoot to support disks
6017 # If this option is enabled then RedBoot will provide commands
6018 # to load disk files.
6020 cdl_component CYGPKG_REDBOOT_DISK {
6028 # Include Redboot commands for disk access
6030 cdl_option CYGSEM_REDBOOT_DISK {
6031 # This option is not active
6032 # The parent CYGPKG_REDBOOT_DISK is disabled
6035 # No user value, uncomment the following line to provide one.
6037 # value_source default
6038 # Default value: CYGINT_REDBOOT_DISK_DRIVERS != 0
6039 # CYGINT_REDBOOT_DISK_DRIVERS == 0
6043 # Hardware drivers for disk-type devices
6045 cdl_interface CYGINT_REDBOOT_DISK_DRIVERS {
6046 # Implemented by CYGSEM_REDBOOT_DISK_IDE, inactive, enabled
6047 # This option is not active
6048 # The parent CYGPKG_REDBOOT_DISK is disabled
6050 # This value cannot be modified here.
6054 # The following properties are affected by this value
6055 # option CYGSEM_REDBOOT_DISK
6056 # DefaultValue: CYGINT_REDBOOT_DISK_DRIVERS != 0
6059 # Maximum number of supported disks
6060 # This option controls the number of disks supported by
6063 cdl_option CYGNUM_REDBOOT_MAX_DISKS {
6064 # This option is not active
6065 # The parent CYGPKG_REDBOOT_DISK is disabled
6068 # No user value, uncomment the following line to provide one.
6070 # value_source default
6074 # Maximum number of partitions per disk
6075 # This option controls the maximum number of supported
6076 # partitions per disk.
6078 cdl_option CYGNUM_REDBOOT_MAX_PARTITIONS {
6079 # This option is not active
6080 # The parent CYGPKG_REDBOOT_DISK is disabled
6083 # No user value, uncomment the following line to provide one.
6085 # value_source default
6089 # Support IDE disks.
6090 # When this option is enabled, RedBoot will support IDE disks.
6092 cdl_component CYGSEM_REDBOOT_DISK_IDE {
6093 # This option is not active
6094 # The parent CYGPKG_REDBOOT_DISK is disabled
6095 # ActiveIf constraint: CYGINT_HAL_PLF_IF_IDE != 0
6096 # CYGINT_HAL_PLF_IF_IDE == 0
6100 # No user value, uncomment the following line to provide one.
6102 # value_source default
6107 # Work with VMware virtual disks
6108 # This option controls the disk driver behavior at
6111 cdl_option CYGSEM_REDBOOT_DISK_IDE_VMWARE {
6112 # This option is not active
6113 # The parent CYGSEM_REDBOOT_DISK_IDE is not active
6116 # No user value, uncomment the following line to provide one.
6118 # value_source default
6123 # Support Linux second extended filesystems.
6124 # When this option is enabled, RedBoot will support EXT2
6127 cdl_component CYGSEM_REDBOOT_DISK_EXT2FS {
6128 # This option is not active
6129 # The parent CYGPKG_REDBOOT_DISK is disabled
6132 # No user value, uncomment the following line to provide one.
6134 # value_source default
6138 # Support ISO9660 filesystems.
6139 # When this option is enabled, RedBoot will support ISO9660
6142 cdl_component CYGSEM_REDBOOT_DISK_ISO9660 {
6143 # This option is not active
6144 # The parent CYGPKG_REDBOOT_DISK is disabled
6146 # Calculated value: 0
6153 # doc: ref/persistent-state-flash.html
6154 # This contains options related to RedBoot's boot script
6157 cdl_component CYGPKG_REDBOOT_BOOT_SCRIPT {
6158 # There is no associated value.
6162 # Boot scripting enabled
6163 # This option controls whether RedBoot boot script
6164 # functionality is enabled.
6166 cdl_option CYGFUN_REDBOOT_BOOT_SCRIPT {
6167 # ActiveIf constraint: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6168 # CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT == 0
6169 # CYGSEM_REDBOOT_FLASH_CONFIG == 1
6172 # Calculated value: 1
6177 # Use default RedBoot boot script
6178 # If enabled, this option will tell RedBoot to use the
6179 # value of this option as a default boot script.
6181 cdl_option CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT {
6183 # No user value, uncomment the following line to provide one.
6185 # The inferred value should not be edited directly.
6187 # value_source inferred
6188 # Default value: 0 0
6190 # The following properties are affected by this value
6191 # option CYGFUN_REDBOOT_BOOT_SCRIPT
6192 # ActiveIf: CYGDAT_REDBOOT_DEFAULT_BOOT_SCRIPT || CYGSEM_REDBOOT_FLASH_CONFIG
6195 # Resolution (in ms) for script timeout value.
6196 # This option controls the resolution of the script
6197 # timeout. The value is specified in milliseconds
6198 # (ms), thus to have the script timeout be defined in
6199 # terms of tenths of seconds, use 100.
6201 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_TIMEOUT_RESOLUTION {
6203 # No user value, uncomment the following line to provide one.
6205 # The inferred value should not be edited directly.
6207 # value_source inferred
6208 # Default value: 1000
6211 # Script default timeout value
6212 # This option is used to set the default timeout for startup
6213 # scripts, when they are enabled.
6215 cdl_option CYGNUM_REDBOOT_BOOT_SCRIPT_DEFAULT_TIMEOUT {
6217 # No user value, uncomment the following line to provide one.
6219 # The inferred value should not be edited directly.
6221 # value_source inferred
6226 # Support RTC for time & date functions
6227 # When this option is enabled, RedBoot will support commands to
6228 # query and set the real time clock (time and date)
6230 cdl_option CYGSEM_REDBOOT_RTC {
6231 # This option is not active
6232 # ActiveIf constraint: CYGPKG_IO_WALLCLOCK
6233 # CYGPKG_IO_WALLCLOCK (unknown) == 0
6237 # No user value, uncomment the following line to provide one.
6239 # value_source default
6243 # Behave like a ROM monitor
6244 # Enabling this option will allow RedBoot to provide ROM
6245 # monitor-style services to programs which it executes.
6247 cdl_option CYGPRI_REDBOOT_ROM_MONITOR {
6248 # ActiveIf constraint: CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM"
6249 # CYG_HAL_STARTUP == ROMRAM
6250 # CYG_HAL_STARTUP == ROMRAM
6253 # Calculated value: 1
6256 # Requires: CYGSEM_HAL_ROM_MONITOR
6257 # CYGSEM_HAL_ROM_MONITOR == 1
6261 # Allow RedBoot to handle GNUPro application 'syscalls'.
6262 # If this option is enabled then RedBoot will install a
6263 # syscall handler to support debugging of applications
6264 # based on GNUPro newlib/bsp.
6266 cdl_component CYGSEM_REDBOOT_BSP_SYSCALLS {
6268 # No user value, uncomment the following line to provide one.
6270 # value_source default
6273 # The following properties are affected by this value
6274 # option CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT
6275 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6276 # option CYGPKG_HAL_GDB_FILEIO
6277 # ActiveIf: CYGSEM_REDBOOT_BSP_SYSCALLS
6281 # Support additional syscalls for 'gprof' profiling
6282 # Support additional syscalls to support a periodic callback
6283 # function for histogram-style profiling, and an enquire/set
6285 # The application must use the GNUPro newlib facilities
6288 cdl_option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF {
6289 # This option is not active
6290 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6291 # ActiveIf constraint: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6292 # CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT == 0
6296 # No user value, uncomment the following line to provide one.
6298 # value_source default
6302 # Does the HAL support 'gprof' profiling?
6304 cdl_interface CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT {
6305 # Implemented by CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT, inactive, enabled
6306 # This option is not active
6307 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6309 # This value cannot be modified here.
6313 # The following properties are affected by this value
6314 # option CYGSEM_REDBOOT_BSP_SYSCALLS_GPROF
6315 # ActiveIf: 0 < CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT
6318 # Do not raise SIGTRAP when program exits
6319 # For some (single shot) newlib based programs,
6320 # exiting and returning a termination status may be
6321 # the normal expected behavior.
6323 cdl_option CYGOPT_REDBOOT_BSP_SYSCALLS_EXIT_WITHOUT_TRAP {
6324 # This option is not active
6325 # The parent CYGSEM_REDBOOT_BSP_SYSCALLS is disabled
6328 # No user value, uncomment the following line to provide one.
6330 # value_source default
6335 # Use a common buffer for Zlib and FIS
6336 # Use a common memory buffer for both the zlib workspace
6337 # and FIS directory operations. This can save a substantial
6338 # amount of RAM, especially when flash sectors are large.
6340 cdl_component CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER {
6341 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_ZLIB && CYGOPT_REDBOOT_FIS
6342 # CYGBLD_BUILD_REDBOOT_WITH_ZLIB == 1
6343 # CYGOPT_REDBOOT_FIS == 1
6347 # No user value, uncomment the following line to provide one.
6349 # value_source default
6354 # Size of Zlib/FIS common buffer
6355 # Size of common buffer to allocate. Must be at least the
6356 # size of one flash sector.
6358 cdl_option CYGNUM_REDBOOT_FIS_ZLIB_COMMON_BUFFER_SIZE {
6359 # This option is not active
6360 # The parent CYGOPT_REDBOOT_FIS_ZLIB_COMMON_BUFFER is disabled
6363 # No user value, uncomment the following line to provide one.
6364 # user_value 0x0000C000
6365 # value_source default
6366 # Default value: 0x0000C000
6367 # Legal values: 0x4000 to 0x80000000
6371 # Buffer size in getc when loading images
6372 # When loading images a buffer is used between redboot and the
6373 # underlying storage medium, eg a filesystem, or a socket etc.
6374 # The size of this buffer can have a big impart on load speed.
6376 cdl_option CYGNUM_REDBOOT_GETC_BUFFER {
6378 # No user value, uncomment the following line to provide one.
6380 # value_source default
6381 # Default value: CYGPKG_REDBOOT_FILEIO ? 4096 : 256
6382 # CYGPKG_REDBOOT_FILEIO == 0
6387 # Redboot for ARM options
6388 # This option lists the target's requirements for a valid Redboot
6391 cdl_component CYGPKG_REDBOOT_ARM_OPTIONS {
6392 # ActiveIf constraint: CYGPKG_REDBOOT
6393 # CYGPKG_REDBOOT == current
6396 # There is no associated value.
6398 # The following properties are affected by this value
6402 # Provide the exec command in RedBoot
6403 # This option contains requirements for booting linux
6404 # from RedBoot. The component is enabled/disabled from
6407 cdl_component CYGPKG_REDBOOT_ARM_LINUX_EXEC {
6408 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT_WITH_EXEC
6409 # CYGBLD_BUILD_REDBOOT_WITH_EXEC == 1
6412 # There is no associated value.
6416 # Enable -x switch for exec command.
6417 # This option allows bi-endian platforms to launch kernels
6418 # built for an endianess different than the RedBoot endianess
6420 cdl_option CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH {
6422 # No user value, uncomment the following line to provide one.
6424 # value_source default
6428 # Physical base address of linux kernel
6429 # This is the physical address of the base of the
6430 # Linux kernel image.
6432 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS {
6434 # No user value, uncomment the following line to provide one.
6435 # user_value 0x70108000
6436 # value_source default
6437 # Default value: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6438 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6442 # Default physical base address of linux kernel
6443 # This is the physical address of the base of the
6444 # Linux kernel image. This option gets set by the
6447 cdl_option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT {
6449 # No user value, uncomment the following line to provide one.
6450 # user_value 0x00008000
6451 # The inferred value should not be edited directly.
6452 inferred_value 0x70108000
6453 # value_source inferred
6454 # Default value: 0x00008000
6456 # The following properties are affected by this value
6457 # option CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS
6458 # DefaultValue: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT
6459 # component CYGPKG_REDBOOT_HAL_TX53_OPTIONS
6460 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6463 # Base address of linux kernel parameter tags
6464 # This is the base address of the area of memory used to
6465 # pass parameters to the Linux kernel. This should be chosen
6466 # to avoid overlap with the kernel and any ramdisk image.
6468 cdl_option CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS {
6470 # No user value, uncomment the following line to provide one.
6471 # user_value 0x00000100
6472 # value_source default
6473 # Default value: 0x00000100
6478 # Redboot HAL options
6479 # This option lists the target's requirements for a valid Redboot
6482 cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
6483 # ActiveIf constraint: CYGPKG_REDBOOT
6484 # CYGPKG_REDBOOT == current
6487 # There is no associated value.
6491 # Build Redboot ROM binary image
6492 # This option enables the conversion of the Redboot ELF
6493 # image to a binary image suitable for ROM programming.
6495 cdl_option CYGBLD_BUILD_REDBOOT_BIN {
6496 # ActiveIf constraint: CYGBLD_BUILD_REDBOOT
6497 # CYGBLD_BUILD_REDBOOT == 1
6501 # No user value, uncomment the following line to provide one.
6503 # value_source default
6508 # Redboot HAL variant options
6510 cdl_component CYGPKG_REDBOOT_HAL_TX53_OPTIONS {
6511 # ActiveIf constraint: CYGPKG_REDBOOT
6512 # CYGPKG_REDBOOT == current
6515 # There is no associated value.
6516 # Requires: CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6517 # CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT == 0x70108000
6522 # ISO C and POSIX infrastructure
6523 # eCos supports implementations of ISO C libraries and POSIX
6524 # implementations. This package provides infrastructure used by
6525 # all such implementations.
6527 cdl_package CYGPKG_ISOINFRA {
6528 # Packages cannot be added or removed, nor can their version be changed,
6529 # simply by editing their value. Instead the appropriate configuration
6530 # should be used to perform these actions.
6532 # This value cannot be modified here.
6534 # Current value: 1 current
6536 # The following properties are affected by this value
6537 # component CYGBLD_BUILD_REDBOOT
6538 # Requires: CYGPKG_ISOINFRA
6539 # package CYGPKG_LIBC_STRING
6540 # Requires: CYGPKG_ISOINFRA
6541 # package CYGPKG_COMPRESS_ZLIB
6542 # Requires: CYGPKG_ISOINFRA
6543 # package CYGPKG_IO_FLASH
6544 # Requires: CYGPKG_ISOINFRA
6545 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6546 # Requires: CYGPKG_ISOINFRA
6547 # option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY
6548 # DefaultValue: 0 != CYGPKG_ISOINFRA
6549 # component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS
6550 # ActiveIf: CYGPKG_ISOINFRA
6551 # package CYGPKG_LIBC_I18N
6552 # Requires: CYGPKG_ISOINFRA
6553 # package CYGPKG_LIBC_STDLIB
6554 # Requires: CYGPKG_ISOINFRA
6558 # Startup and termination
6560 cdl_component CYGPKG_ISO_STARTUP {
6561 # There is no associated value.
6565 # main() startup implementations
6566 # Implementations of this interface arrange for a user-supplied
6567 # main() to be called in an ISO compatible environment.
6569 cdl_interface CYGINT_ISO_MAIN_STARTUP {
6570 # No options implement this inferface
6571 # This value cannot be modified here.
6574 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6575 # CYGINT_ISO_MAIN_STARTUP == 0
6578 # The following properties are affected by this value
6579 # interface CYGINT_ISO_MAIN_STARTUP
6580 # Requires: 1 >= CYGINT_ISO_MAIN_STARTUP
6583 # environ implementations
6584 # Implementations of this interface provide the environ
6585 # variable required by POSIX.
6587 cdl_interface CYGINT_ISO_ENVIRON {
6588 # No options implement this inferface
6589 # This value cannot be modified here.
6592 # Requires: 1 >= CYGINT_ISO_ENVIRON
6593 # CYGINT_ISO_ENVIRON == 0
6596 # The following properties are affected by this value
6597 # interface CYGINT_ISO_ENVIRON
6598 # Requires: 1 >= CYGINT_ISO_ENVIRON
6604 cdl_component CYGPKG_ISO_CTYPE_H {
6605 # There is no associated value.
6609 # Number of implementations of ctype functions
6611 cdl_interface CYGINT_ISO_CTYPE {
6612 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6613 # This value cannot be modified here.
6616 # Requires: 1 >= CYGINT_ISO_CTYPE
6617 # CYGINT_ISO_CTYPE == 1
6620 # The following properties are affected by this value
6621 # interface CYGINT_ISO_CTYPE
6622 # Requires: 1 >= CYGINT_ISO_CTYPE
6623 # package CYGPKG_HAL_ARM_TX53KARO
6624 # Requires: CYGINT_ISO_CTYPE
6625 # option CYGFUN_LIBC_STRING_BSD_FUNCS
6626 # Requires: CYGINT_ISO_CTYPE
6627 # package CYGPKG_LIBC_STDLIB
6628 # Requires: CYGINT_ISO_CTYPE
6631 # Ctype implementation header
6633 cdl_option CYGBLD_ISO_CTYPE_HEADER {
6635 # No user value, uncomment the following line to provide one.
6637 # The inferred value should not be edited directly.
6638 inferred_value 1 <cyg/libc/i18n/ctype.inl>
6639 # value_source inferred
6640 # Default value: 0 0
6642 # The following properties are affected by this value
6643 # option CYGPKG_LIBC_I18N_NEWLIB_CTYPE
6644 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/newlibctype.h>"
6645 # option CYGIMP_LIBC_I18N_CTYPE_INLINES
6646 # Requires: CYGBLD_ISO_CTYPE_HEADER == "<cyg/libc/i18n/ctype.inl>"
6652 cdl_component CYGPKG_ISO_ERRNO {
6653 # There is no associated value.
6657 # Number of implementations of error codes
6659 cdl_interface CYGINT_ISO_ERRNO_CODES {
6660 # Implemented by CYGPKG_ERROR, active, enabled
6661 # This value cannot be modified here.
6664 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6665 # CYGINT_ISO_ERRNO_CODES == 1
6668 # The following properties are affected by this value
6669 # interface CYGINT_ISO_ERRNO_CODES
6670 # Requires: 1 >= CYGINT_ISO_ERRNO_CODES
6673 # Error codes implementation header
6675 cdl_option CYGBLD_ISO_ERRNO_CODES_HEADER {
6677 # No user value, uncomment the following line to provide one.
6679 # The inferred value should not be edited directly.
6680 inferred_value 1 <cyg/error/codes.h>
6681 # value_source inferred
6682 # Default value: 0 0
6684 # The following properties are affected by this value
6685 # package CYGPKG_ERROR
6686 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
6689 # Number of implementations of errno variable
6691 cdl_interface CYGINT_ISO_ERRNO {
6692 # Implemented by CYGPKG_ERROR_ERRNO, active, enabled
6693 # This value cannot be modified here.
6696 # Requires: 1 >= CYGINT_ISO_ERRNO
6697 # CYGINT_ISO_ERRNO == 1
6700 # The following properties are affected by this value
6701 # interface CYGINT_ISO_ERRNO
6702 # Requires: 1 >= CYGINT_ISO_ERRNO
6705 # errno variable implementation header
6707 cdl_option CYGBLD_ISO_ERRNO_HEADER {
6709 # No user value, uncomment the following line to provide one.
6711 # The inferred value should not be edited directly.
6712 inferred_value 1 <cyg/error/errno.h>
6713 # value_source inferred
6714 # Default value: 0 0
6716 # The following properties are affected by this value
6717 # component CYGPKG_ERROR_ERRNO
6718 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
6722 # Locale-related functions
6724 cdl_component CYGPKG_ISO_LOCALE {
6725 # There is no associated value.
6729 # Number of implementations of locale functions
6731 cdl_interface CYGINT_ISO_LOCALE {
6732 # Implemented by CYGPKG_LIBC_I18N, active, enabled
6733 # This value cannot be modified here.
6736 # Requires: 1 >= CYGINT_ISO_LOCALE
6737 # CYGINT_ISO_LOCALE == 1
6740 # The following properties are affected by this value
6741 # interface CYGINT_ISO_LOCALE
6742 # Requires: 1 >= CYGINT_ISO_LOCALE
6745 # Locale implementation header
6747 cdl_option CYGBLD_ISO_LOCALE_HEADER {
6749 # No user value, uncomment the following line to provide one.
6751 # value_source default
6752 # Default value: 0 0
6756 # Standard I/O-related functionality
6758 cdl_component CYGPKG_ISO_STDIO {
6759 # There is no associated value.
6763 # Number of implementations of stdio file types
6765 cdl_interface CYGINT_ISO_STDIO_FILETYPES {
6766 # No options implement this inferface
6767 # This value cannot be modified here.
6769 # Current value: 0 0
6770 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6771 # CYGINT_ISO_STDIO_FILETYPES == 0
6774 # The following properties are affected by this value
6775 # interface CYGINT_ISO_STDIO_FILETYPES
6776 # Requires: 1 >= CYGINT_ISO_STDIO_FILETYPES
6779 # Stdio file types implementation header
6781 cdl_option CYGBLD_ISO_STDIO_FILETYPES_HEADER {
6783 # No user value, uncomment the following line to provide one.
6785 # value_source default
6786 # Default value: 0 0
6789 # Stdio standard streams implementations
6791 cdl_interface CYGINT_ISO_STDIO_STREAMS {
6792 # No options implement this inferface
6793 # This value cannot be modified here.
6795 # Current value: 0 0
6796 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6797 # CYGINT_ISO_STDIO_STREAMS == 0
6800 # The following properties are affected by this value
6801 # interface CYGINT_ISO_STDIO_STREAMS
6802 # Requires: 1 >= CYGINT_ISO_STDIO_STREAMS
6805 # Stdio standard streams implementation header
6806 # This header file must define stdin, stdout
6809 cdl_option CYGBLD_ISO_STDIO_STREAMS_HEADER {
6811 # No user value, uncomment the following line to provide one.
6813 # value_source default
6814 # Default value: 0 0
6817 # Number of implementations of stdio file operations
6819 cdl_interface CYGINT_ISO_STDIO_FILEOPS {
6820 # No options implement this inferface
6821 # This value cannot be modified here.
6823 # Current value: 0 0
6824 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6825 # CYGINT_ISO_STDIO_FILEOPS == 0
6828 # The following properties are affected by this value
6829 # interface CYGINT_ISO_STDIO_FILEOPS
6830 # Requires: 1 >= CYGINT_ISO_STDIO_FILEOPS
6833 # Stdio file operations implementation header
6834 # This header controls the file system operations on a file
6835 # such as remove(), rename(), tmpfile(), tmpnam() and associated
6838 cdl_option CYGBLD_ISO_STDIO_FILEOPS_HEADER {
6840 # No user value, uncomment the following line to provide one.
6842 # value_source default
6843 # Default value: 0 0
6846 # Number of implementations of stdio file access functionals
6848 cdl_interface CYGINT_ISO_STDIO_FILEACCESS {
6849 # No options implement this inferface
6850 # This value cannot be modified here.
6852 # Current value: 0 0
6853 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6854 # CYGINT_ISO_STDIO_FILEACCESS == 0
6857 # The following properties are affected by this value
6858 # interface CYGINT_ISO_STDIO_FILEACCESS
6859 # Requires: 1 >= CYGINT_ISO_STDIO_FILEACCESS
6860 # option CYGFUN_COMPRESS_ZLIB_GZIO
6861 # Requires: CYGINT_ISO_STDIO_FILEACCESS
6864 # Stdio file access implementation header
6865 # This header controls the file access operations
6866 # such as fclose(), fflush(), fopen(), freopen(), setbuf(),
6867 # setvbuf(), and associated constants.
6869 cdl_option CYGBLD_ISO_STDIO_FILEACCESS_HEADER {
6871 # No user value, uncomment the following line to provide one.
6873 # value_source default
6874 # Default value: 0 0
6877 # Number of implementations of stdio formatted I/O
6879 cdl_interface CYGINT_ISO_STDIO_FORMATTED_IO {
6880 # No options implement this inferface
6881 # This value cannot be modified here.
6883 # Current value: 0 0
6884 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6885 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
6888 # The following properties are affected by this value
6889 # interface CYGINT_ISO_STDIO_FORMATTED_IO
6890 # Requires: 1 >= CYGINT_ISO_STDIO_FORMATTED_IO
6891 # option CYGFUN_COMPRESS_ZLIB_GZIO
6892 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
6895 # Stdio formatted I/O implementation header
6897 cdl_option CYGBLD_ISO_STDIO_FORMATTED_IO_HEADER {
6899 # No user value, uncomment the following line to provide one.
6901 # value_source default
6902 # Default value: 0 0
6905 # Number of implementations of stdio character I/O
6907 cdl_interface CYGINT_ISO_STDIO_CHAR_IO {
6908 # No options implement this inferface
6909 # This value cannot be modified here.
6911 # Current value: 0 0
6912 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6913 # CYGINT_ISO_STDIO_CHAR_IO == 0
6916 # The following properties are affected by this value
6917 # interface CYGINT_ISO_STDIO_CHAR_IO
6918 # Requires: 1 >= CYGINT_ISO_STDIO_CHAR_IO
6921 # Stdio character I/O implementation header
6923 cdl_option CYGBLD_ISO_STDIO_CHAR_IO_HEADER {
6925 # No user value, uncomment the following line to provide one.
6927 # value_source default
6928 # Default value: 0 0
6931 # Number of implementations of stdio direct I/O
6933 cdl_interface CYGINT_ISO_STDIO_DIRECT_IO {
6934 # No options implement this inferface
6935 # This value cannot be modified here.
6937 # Current value: 0 0
6938 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6939 # CYGINT_ISO_STDIO_DIRECT_IO == 0
6942 # The following properties are affected by this value
6943 # interface CYGINT_ISO_STDIO_DIRECT_IO
6944 # Requires: 1 >= CYGINT_ISO_STDIO_DIRECT_IO
6947 # Stdio direct I/O implementation header
6949 cdl_option CYGBLD_ISO_STDIO_DIRECT_IO_HEADER {
6951 # No user value, uncomment the following line to provide one.
6953 # value_source default
6954 # Default value: 0 0
6957 # Number of implementations of stdio file positioning
6959 cdl_interface CYGINT_ISO_STDIO_FILEPOS {
6960 # No options implement this inferface
6961 # This value cannot be modified here.
6963 # Current value: 0 0
6964 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6965 # CYGINT_ISO_STDIO_FILEPOS == 0
6968 # The following properties are affected by this value
6969 # interface CYGINT_ISO_STDIO_FILEPOS
6970 # Requires: 1 >= CYGINT_ISO_STDIO_FILEPOS
6971 # option CYGFUN_COMPRESS_ZLIB_GZIO
6972 # Requires: CYGINT_ISO_STDIO_FILEPOS
6975 # Stdio file positioning implementation header
6977 cdl_option CYGBLD_ISO_STDIO_FILEPOS_HEADER {
6979 # No user value, uncomment the following line to provide one.
6981 # value_source default
6982 # Default value: 0 0
6985 # Number of implementations of stdio error handling
6987 cdl_interface CYGINT_ISO_STDIO_ERROR {
6988 # No options implement this inferface
6989 # This value cannot be modified here.
6991 # Current value: 0 0
6992 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
6993 # CYGINT_ISO_STDIO_ERROR == 0
6996 # The following properties are affected by this value
6997 # interface CYGINT_ISO_STDIO_ERROR
6998 # Requires: 1 >= CYGINT_ISO_STDIO_ERROR
7001 # Stdio error handling implementation header
7003 cdl_option CYGBLD_ISO_STDIO_ERROR_HEADER {
7005 # No user value, uncomment the following line to provide one.
7007 # value_source default
7008 # Default value: 0 0
7011 # POSIX fd-related function implementations
7013 cdl_interface CYGINT_ISO_STDIO_POSIX_FDFUNCS {
7014 # No options implement this inferface
7015 # This value cannot be modified here.
7017 # Current value: 0 0
7018 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7019 # CYGINT_ISO_STDIO_POSIX_FDFUNCS == 0
7022 # The following properties are affected by this value
7023 # interface CYGINT_ISO_STDIO_POSIX_FDFUNCS
7024 # Requires: 1 >= CYGINT_ISO_STDIO_POSIX_FDFUNCS
7027 # POSIX fd-related function implementation header
7029 cdl_option CYGBLD_ISO_STDIO_POSIX_FDFUNCS_HEADER {
7031 # No user value, uncomment the following line to provide one.
7033 # value_source default
7034 # Default value: 0 0
7038 # Standard general utility functions
7040 cdl_component CYGPKG_ISO_STDLIB {
7041 # There is no associated value.
7045 # String conversion function implementations
7047 cdl_interface CYGINT_ISO_STDLIB_STRCONV {
7048 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7049 # This value cannot be modified here.
7052 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7053 # CYGINT_ISO_STDLIB_STRCONV == 1
7056 # The following properties are affected by this value
7057 # interface CYGINT_ISO_STDLIB_STRCONV
7058 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV
7061 # String conversion function implementation header
7063 cdl_option CYGBLD_ISO_STDLIB_STRCONV_HEADER {
7065 # No user value, uncomment the following line to provide one.
7067 # The inferred value should not be edited directly.
7068 inferred_value 1 <cyg/libc/stdlib/atox.inl>
7069 # value_source inferred
7070 # Default value: 0 0
7072 # The following properties are affected by this value
7073 # option CYGIMP_LIBC_STDLIB_INLINE_ATOX
7074 # Requires: CYGBLD_ISO_STDLIB_STRCONV_HEADER == "<cyg/libc/stdlib/atox.inl>"
7077 # String to FP conversion function implementations
7079 cdl_interface CYGINT_ISO_STDLIB_STRCONV_FLOAT {
7080 # Implemented by CYGFUN_LIBC_strtod, active, disabled
7081 # This value cannot be modified here.
7084 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7085 # CYGINT_ISO_STDLIB_STRCONV_FLOAT == 0
7088 # The following properties are affected by this value
7089 # interface CYGINT_ISO_STDLIB_STRCONV_FLOAT
7090 # Requires: 1 >= CYGINT_ISO_STDLIB_STRCONV_FLOAT
7093 # String to FP conversion function implementation header
7095 cdl_option CYGBLD_ISO_STDLIB_STRCONV_FLOAT_HEADER {
7097 # No user value, uncomment the following line to provide one.
7099 # value_source default
7100 # Default value: 0 0
7103 # Random number generator implementations
7105 cdl_interface CYGINT_ISO_RAND {
7106 # Implemented by CYGIMP_LIBC_RAND_SIMPLEST, active, disabled
7107 # Implemented by CYGIMP_LIBC_RAND_SIMPLE1, active, disabled
7108 # Implemented by CYGIMP_LIBC_RAND_KNUTH1, active, enabled
7109 # This value cannot be modified here.
7112 # Requires: 1 >= CYGINT_ISO_RAND
7113 # CYGINT_ISO_RAND == 1
7116 # The following properties are affected by this value
7117 # interface CYGINT_ISO_RAND
7118 # Requires: 1 >= CYGINT_ISO_RAND
7121 # Random number generator implementation header
7123 cdl_option CYGBLD_ISO_RAND_HEADER {
7125 # No user value, uncomment the following line to provide one.
7127 # value_source default
7128 # Default value: 0 0
7131 # Malloc implementations
7133 cdl_interface CYGINT_ISO_MALLOC {
7134 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7135 # This value cannot be modified here.
7138 # Requires: 1 >= CYGINT_ISO_MALLOC
7139 # CYGINT_ISO_MALLOC == 1
7142 # The following properties are affected by this value
7143 # interface CYGINT_ISO_MALLOC
7144 # Requires: 1 >= CYGINT_ISO_MALLOC
7145 # option CYGFUN_LIBC_STRING_STRDUP
7146 # ActiveIf: CYGINT_ISO_MALLOC
7149 # Malloc implementation header
7151 cdl_option CYGBLD_ISO_MALLOC_HEADER {
7153 # No user value, uncomment the following line to provide one.
7155 # value_source default
7156 # Default value: 0 0
7159 # Mallinfo() implementations
7161 cdl_interface CYGINT_ISO_MALLINFO {
7162 # Implemented by CYGPKG_MEMALLOC_MALLOC_ALLOCATORS, active, enabled
7163 # This value cannot be modified here.
7166 # Requires: 1 >= CYGINT_ISO_MALLINFO
7167 # CYGINT_ISO_MALLINFO == 1
7170 # The following properties are affected by this value
7171 # interface CYGINT_ISO_MALLINFO
7172 # Requires: 1 >= CYGINT_ISO_MALLINFO
7175 # Mallinfo() implementation header
7177 cdl_option CYGBLD_ISO_MALLINFO_HEADER {
7179 # No user value, uncomment the following line to provide one.
7181 # value_source default
7182 # Default value: 0 0
7185 # Program exit functionality implementations
7187 cdl_interface CYGINT_ISO_EXIT {
7188 # No options implement this inferface
7189 # This value cannot be modified here.
7192 # Requires: 1 >= CYGINT_ISO_EXIT
7193 # CYGINT_ISO_EXIT == 0
7196 # The following properties are affected by this value
7197 # interface CYGINT_ISO_EXIT
7198 # Requires: 1 >= CYGINT_ISO_EXIT
7199 # option CYGFUN_INFRA_DUMMY_ABORT
7200 # Requires: !CYGINT_ISO_EXIT
7201 # option CYGFUN_INFRA_DUMMY_ABORT
7202 # DefaultValue: CYGINT_ISO_EXIT == 0
7205 # Program exit functionality implementation header
7207 cdl_option CYGBLD_ISO_EXIT_HEADER {
7209 # No user value, uncomment the following line to provide one.
7211 # value_source default
7212 # Default value: 0 0
7215 # Program environment implementations
7217 cdl_interface CYGINT_ISO_STDLIB_ENVIRON {
7218 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7219 # This value cannot be modified here.
7222 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7223 # CYGINT_ISO_STDLIB_ENVIRON == 1
7226 # The following properties are affected by this value
7227 # interface CYGINT_ISO_STDLIB_ENVIRON
7228 # Requires: 1 >= CYGINT_ISO_STDLIB_ENVIRON
7231 # Program environment implementation header
7233 cdl_option CYGBLD_ISO_STDLIB_ENVIRON_HEADER {
7235 # No user value, uncomment the following line to provide one.
7237 # value_source default
7238 # Default value: 0 0
7241 # system() implementations
7243 cdl_interface CYGINT_ISO_STDLIB_SYSTEM {
7244 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7245 # This value cannot be modified here.
7248 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7249 # CYGINT_ISO_STDLIB_SYSTEM == 1
7252 # The following properties are affected by this value
7253 # interface CYGINT_ISO_STDLIB_SYSTEM
7254 # Requires: 1 >= CYGINT_ISO_STDLIB_SYSTEM
7257 # system() implementation header
7259 cdl_option CYGBLD_ISO_STDLIB_SYSTEM_HEADER {
7261 # No user value, uncomment the following line to provide one.
7263 # value_source default
7264 # Default value: 0 0
7267 # bsearch() implementations
7269 cdl_interface CYGINT_ISO_BSEARCH {
7270 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7271 # This value cannot be modified here.
7274 # Requires: 1 >= CYGINT_ISO_BSEARCH
7275 # CYGINT_ISO_BSEARCH == 1
7278 # The following properties are affected by this value
7279 # interface CYGINT_ISO_BSEARCH
7280 # Requires: 1 >= CYGINT_ISO_BSEARCH
7283 # bsearch() implementation header
7285 cdl_option CYGBLD_ISO_BSEARCH_HEADER {
7287 # No user value, uncomment the following line to provide one.
7289 # value_source default
7290 # Default value: 0 0
7293 # qsort() implementations
7295 cdl_interface CYGINT_ISO_QSORT {
7296 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7297 # This value cannot be modified here.
7300 # Requires: 1 >= CYGINT_ISO_STDLIB_QSORT
7301 # CYGINT_ISO_STDLIB_QSORT (unknown) == 0
7304 # The following properties are affected by this value
7307 # qsort() implementation header
7309 cdl_option CYGBLD_ISO_QSORT_HEADER {
7311 # No user value, uncomment the following line to provide one.
7313 # value_source default
7314 # Default value: 0 0
7317 # abs()/labs() implementations
7319 cdl_interface CYGINT_ISO_ABS {
7320 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7321 # This value cannot be modified here.
7324 # Requires: 1 >= CYGINT_ISO_STDLIB_ABS
7325 # CYGINT_ISO_STDLIB_ABS (unknown) == 0
7328 # The following properties are affected by this value
7331 # abs()/labs() implementation header
7333 cdl_option CYGBLD_ISO_STDLIB_ABS_HEADER {
7335 # No user value, uncomment the following line to provide one.
7337 # The inferred value should not be edited directly.
7338 inferred_value 1 <cyg/libc/stdlib/abs.inl>
7339 # value_source inferred
7340 # Default value: 0 0
7342 # The following properties are affected by this value
7343 # option CYGIMP_LIBC_STDLIB_INLINE_ABS
7344 # Requires: CYGBLD_ISO_STDLIB_ABS_HEADER == "<cyg/libc/stdlib/abs.inl>"
7347 # div()/ldiv() implementations
7349 cdl_interface CYGINT_ISO_DIV {
7350 # Implemented by CYGPKG_LIBC_STDLIB, active, enabled
7351 # This value cannot be modified here.
7354 # Requires: 1 >= CYGINT_ISO_STDLIB_DIV
7355 # CYGINT_ISO_STDLIB_DIV (unknown) == 0
7358 # The following properties are affected by this value
7361 # div()/ldiv() implementation header
7363 cdl_option CYGBLD_ISO_STDLIB_DIV_HEADER {
7365 # No user value, uncomment the following line to provide one.
7367 # The inferred value should not be edited directly.
7368 inferred_value 1 <cyg/libc/stdlib/div.inl>
7369 # value_source inferred
7370 # Default value: 0 0
7372 # The following properties are affected by this value
7373 # option CYGIMP_LIBC_STDLIB_INLINE_DIV
7374 # Requires: CYGBLD_ISO_STDLIB_DIV_HEADER == "<cyg/libc/stdlib/div.inl>"
7377 # Header defining the implementation's MB_CUR_MAX
7379 cdl_option CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER {
7381 # No user value, uncomment the following line to provide one.
7383 # value_source default
7384 # Default value: 0 0
7386 # The following properties are affected by this value
7387 # interface CYGINT_LIBC_I18N_MB_REQUIRED
7388 # Requires: CYGBLD_ISO_STDLIB_MB_CUR_MAX_HEADER == "<cyg/libc/i18n/mb.h>"
7391 # Multibyte character implementations
7393 cdl_interface CYGINT_ISO_STDLIB_MULTIBYTE {
7394 # Implemented by CYGPKG_LIBC_I18N, active, enabled
7395 # This value cannot be modified here.
7398 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7399 # CYGINT_ISO_STDLIB_MULTIBYTE == 1
7402 # The following properties are affected by this value
7403 # interface CYGINT_ISO_STDLIB_MULTIBYTE
7404 # Requires: 1 >= CYGINT_ISO_STDLIB_MULTIBYTE
7407 # Multibyte character implementation header
7409 cdl_option CYGBLD_ISO_STDLIB_MULTIBYTE_HEADER {
7411 # No user value, uncomment the following line to provide one.
7413 # value_source default
7414 # Default value: 0 0
7420 cdl_component CYGPKG_ISO_STRING {
7421 # There is no associated value.
7425 # Number of implementations of strerror() function
7427 cdl_interface CYGINT_ISO_STRERROR {
7428 # Implemented by CYGPKG_ERROR_STRERROR, active, enabled
7429 # This value cannot be modified here.
7431 # Current value: 1 1
7432 # Requires: 1 >= CYGINT_ISO_STRERROR
7433 # CYGINT_ISO_STRERROR == 1
7436 # The following properties are affected by this value
7437 # interface CYGINT_ISO_STRERROR
7438 # Requires: 1 >= CYGINT_ISO_STRERROR
7441 # strerror() implementation header
7443 cdl_option CYGBLD_ISO_STRERROR_HEADER {
7445 # No user value, uncomment the following line to provide one.
7447 # The inferred value should not be edited directly.
7448 inferred_value 1 <cyg/error/strerror.h>
7449 # value_source inferred
7450 # Default value: 0 0
7452 # The following properties are affected by this value
7453 # option CYGPKG_ERROR_STRERROR
7454 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
7457 # memcpy() implementation header
7459 cdl_option CYGBLD_ISO_MEMCPY_HEADER {
7461 # No user value, uncomment the following line to provide one.
7463 # value_source default
7464 # Default value: 0 0
7467 # memset() implementation header
7469 cdl_option CYGBLD_ISO_MEMSET_HEADER {
7471 # No user value, uncomment the following line to provide one.
7473 # value_source default
7474 # Default value: 0 0
7477 # Number of implementations of strtok_r() function
7479 cdl_interface CYGINT_ISO_STRTOK_R {
7480 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7481 # This value cannot be modified here.
7483 # Current value: 1 1
7484 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7485 # CYGINT_ISO_STRTOK_R == 1
7488 # The following properties are affected by this value
7489 # interface CYGINT_ISO_STRTOK_R
7490 # Requires: 1 >= CYGINT_ISO_STRTOK_R
7493 # strtok_r() implementation header
7495 cdl_option CYGBLD_ISO_STRTOK_R_HEADER {
7497 # No user value, uncomment the following line to provide one.
7499 # The inferred value should not be edited directly.
7500 inferred_value 1 <cyg/libc/string/string.h>
7501 # value_source inferred
7502 # Default value: 0 0
7504 # The following properties are affected by this value
7505 # package CYGPKG_LIBC_STRING
7506 # Requires: CYGBLD_ISO_STRTOK_R_HEADER == "<cyg/libc/string/string.h>"
7509 # Number of implementations of locale-specific string functions
7510 # This covers locale-dependent string functions such as strcoll()
7513 cdl_interface CYGINT_ISO_STRING_LOCALE_FUNCS {
7514 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7515 # This value cannot be modified here.
7517 # Current value: 1 1
7518 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7519 # CYGINT_ISO_STRING_LOCALE_FUNCS == 1
7522 # The following properties are affected by this value
7523 # interface CYGINT_ISO_STRING_LOCALE_FUNCS
7524 # Requires: 1 >= CYGINT_ISO_STRING_LOCALE_FUNCS
7527 # Locale-specific string functions' implementation header
7528 # This covers locale-dependent string functions such as strcoll()
7531 cdl_option CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER {
7533 # No user value, uncomment the following line to provide one.
7535 # The inferred value should not be edited directly.
7536 inferred_value 1 <cyg/libc/string/string.h>
7537 # value_source inferred
7538 # Default value: 0 0
7540 # The following properties are affected by this value
7541 # package CYGPKG_LIBC_STRING
7542 # Requires: CYGBLD_ISO_STRING_LOCALE_FUNCS_HEADER == "<cyg/libc/string/string.h>"
7545 # Number of implementations of BSD string functions
7547 cdl_interface CYGINT_ISO_STRING_BSD_FUNCS {
7548 # Implemented by CYGFUN_LIBC_STRING_BSD_FUNCS, active, disabled
7549 # This value cannot be modified here.
7551 # Current value: 0 0
7552 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7553 # CYGINT_ISO_STRING_BSD_FUNCS == 0
7556 # The following properties are affected by this value
7557 # interface CYGINT_ISO_STRING_BSD_FUNCS
7558 # Requires: 1 >= CYGINT_ISO_STRING_BSD_FUNCS
7561 # BSD string functions' implementation header
7563 cdl_option CYGBLD_ISO_STRING_BSD_FUNCS_HEADER {
7565 # No user value, uncomment the following line to provide one.
7567 # The inferred value should not be edited directly.
7568 inferred_value 1 <cyg/libc/string/bsdstring.h>
7569 # value_source inferred
7570 # Default value: 0 0
7572 # The following properties are affected by this value
7573 # option CYGFUN_LIBC_STRING_BSD_FUNCS
7574 # Requires: CYGBLD_ISO_STRING_BSD_FUNCS_HEADER == "<cyg/libc/string/bsdstring.h>"
7577 # Number of implementations of other mem*() functions
7579 cdl_interface CYGINT_ISO_STRING_MEMFUNCS {
7580 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7581 # This value cannot be modified here.
7583 # Current value: 1 1
7584 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7585 # CYGINT_ISO_STRING_MEMFUNCS == 1
7588 # The following properties are affected by this value
7589 # interface CYGINT_ISO_STRING_MEMFUNCS
7590 # Requires: 1 >= CYGINT_ISO_STRING_MEMFUNCS
7591 # component CYGBLD_BUILD_REDBOOT
7592 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7593 # component CYGPKG_IO_ETH_DRIVERS_STAND_ALONE
7594 # Requires: CYGINT_ISO_STRING_MEMFUNCS
7597 # Other mem*() functions' implementation header
7599 cdl_option CYGBLD_ISO_STRING_MEMFUNCS_HEADER {
7601 # No user value, uncomment the following line to provide one.
7603 # The inferred value should not be edited directly.
7604 inferred_value 1 <cyg/libc/string/string.h>
7605 # value_source inferred
7606 # Default value: 0 0
7608 # The following properties are affected by this value
7609 # package CYGPKG_LIBC_STRING
7610 # Requires: CYGBLD_ISO_STRING_MEMFUNCS_HEADER == "<cyg/libc/string/string.h>"
7613 # Number of implementations of other ISO C str*() functions
7614 # This covers the other str*() functions defined by ISO C.
7616 cdl_interface CYGINT_ISO_STRING_STRFUNCS {
7617 # Implemented by CYGPKG_LIBC_STRING, active, enabled
7618 # This value cannot be modified here.
7620 # Current value: 1 1
7621 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7622 # CYGINT_ISO_STRING_STRFUNCS == 1
7625 # The following properties are affected by this value
7626 # interface CYGINT_ISO_STRING_STRFUNCS
7627 # Requires: 1 >= CYGINT_ISO_STRING_STRFUNCS
7628 # option CYGFUN_INFRA_DUMMY_STRLEN
7629 # Requires: !CYGINT_ISO_STRING_STRFUNCS
7630 # option CYGFUN_INFRA_DUMMY_STRLEN
7631 # DefaultValue: CYGINT_ISO_STRING_STRFUNCS == 0
7632 # component CYGBLD_BUILD_REDBOOT
7633 # Requires: CYGINT_ISO_STRING_STRFUNCS
7634 # component CYGPKG_IO_ETH_DRIVERS_NET
7635 # Requires: CYGINT_ISO_STRING_STRFUNCS
7636 # option CYGFUN_COMPRESS_ZLIB_GZIO
7637 # Requires: CYGINT_ISO_STRING_STRFUNCS
7638 # package CYGPKG_IO_FLASH
7639 # Requires: CYGINT_ISO_STRING_STRFUNCS
7640 # package CYGPKG_LIBC_STDLIB
7641 # Requires: CYGINT_ISO_STRING_STRFUNCS
7644 # Other ISO C str*() functions' implementation header
7645 # This covers the other str*() functions defined by ISO C.
7647 cdl_option CYGBLD_ISO_STRING_STRFUNCS_HEADER {
7649 # No user value, uncomment the following line to provide one.
7651 # The inferred value should not be edited directly.
7652 inferred_value 1 <cyg/libc/string/string.h>
7653 # value_source inferred
7654 # Default value: 0 0
7656 # The following properties are affected by this value
7657 # package CYGPKG_LIBC_STRING
7658 # Requires: CYGBLD_ISO_STRING_STRFUNCS_HEADER == "<cyg/libc/string/string.h>"
7662 # Clock and time functionality
7664 cdl_component CYGPKG_ISO_TIME {
7665 # There is no associated value.
7669 # time_t implementation header
7671 cdl_option CYGBLD_ISO_TIME_T_HEADER {
7673 # No user value, uncomment the following line to provide one.
7675 # value_source default
7676 # Default value: 0 0
7679 # clock_t implementation header
7681 cdl_option CYGBLD_ISO_CLOCK_T_HEADER {
7683 # No user value, uncomment the following line to provide one.
7685 # value_source default
7686 # Default value: 0 0
7689 # struct timeval implementation header
7691 cdl_option CYGBLD_ISO_STRUCTTIMEVAL_HEADER {
7693 # No user value, uncomment the following line to provide one.
7695 # value_source default
7696 # Default value: 0 0
7699 # fnmatch implementation header
7701 cdl_option CYGBLD_ISO_FNMATCH_HEADER {
7703 # No user value, uncomment the following line to provide one.
7705 # value_source default
7706 # Default value: 0 0
7709 # Number of implementations of POSIX timer types
7711 cdl_interface CYGINT_ISO_POSIX_TIMER_TYPES {
7712 # No options implement this inferface
7713 # This value cannot be modified here.
7715 # Current value: 0 0
7716 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7717 # CYGINT_ISO_POSIX_TIMER_TYPES == 0
7720 # The following properties are affected by this value
7721 # interface CYGINT_ISO_POSIX_TIMER_TYPES
7722 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_TYPES
7725 # POSIX timer types implementation header
7727 cdl_option CYGBLD_ISO_POSIX_TIMER_TYPES_HEADER {
7729 # No user value, uncomment the following line to provide one.
7731 # value_source default
7732 # Default value: 0 0
7735 # Number of implementations of POSIX clock types
7737 cdl_interface CYGINT_ISO_POSIX_CLOCK_TYPES {
7738 # No options implement this inferface
7739 # This value cannot be modified here.
7741 # Current value: 0 0
7742 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7743 # CYGINT_ISO_POSIX_CLOCK_TYPES == 0
7746 # The following properties are affected by this value
7747 # interface CYGINT_ISO_POSIX_CLOCK_TYPES
7748 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCK_TYPES
7751 # POSIX clock types implementation header
7753 cdl_option CYGBLD_ISO_POSIX_CLOCK_TYPES_HEADER {
7755 # No user value, uncomment the following line to provide one.
7757 # value_source default
7758 # Default value: 0 0
7761 # Number of implementations of ISO C types
7763 cdl_interface CYGINT_ISO_C_TIME_TYPES {
7764 # No options implement this inferface
7765 # This value cannot be modified here.
7767 # Current value: 0 0
7768 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7769 # CYGINT_ISO_C_TIME_TYPES == 0
7772 # The following properties are affected by this value
7773 # interface CYGINT_ISO_C_TIME_TYPES
7774 # Requires: 1 >= CYGINT_ISO_C_TIME_TYPES
7777 # ISO C time types implementation header
7779 cdl_option CYGBLD_ISO_C_TIME_TYPES_HEADER {
7781 # No user value, uncomment the following line to provide one.
7783 # value_source default
7784 # Default value: 0 0
7787 # Number of implementations of POSIX timers
7789 cdl_interface CYGINT_ISO_POSIX_TIMERS {
7790 # No options implement this inferface
7791 # This value cannot be modified here.
7793 # Current value: 0 0
7794 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7795 # CYGINT_ISO_POSIX_TIMERS == 0
7798 # The following properties are affected by this value
7799 # interface CYGINT_ISO_POSIX_TIMERS
7800 # Requires: 1 >= CYGINT_ISO_POSIX_TIMERS
7803 # POSIX timer implementation header
7805 cdl_option CYGBLD_ISO_POSIX_TIMERS_HEADER {
7807 # No user value, uncomment the following line to provide one.
7809 # value_source default
7810 # Default value: 0 0
7813 # Number of implementations of POSIX clocks
7815 cdl_interface CYGINT_ISO_POSIX_CLOCKS {
7816 # No options implement this inferface
7817 # This value cannot be modified here.
7819 # Current value: 0 0
7820 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7821 # CYGINT_ISO_POSIX_CLOCKS == 0
7824 # The following properties are affected by this value
7825 # interface CYGINT_ISO_POSIX_CLOCKS
7826 # Requires: 1 >= CYGINT_ISO_POSIX_CLOCKS
7829 # POSIX clocks implementation header
7831 cdl_option CYGBLD_ISO_POSIX_CLOCKS_HEADER {
7833 # No user value, uncomment the following line to provide one.
7835 # value_source default
7836 # Default value: 0 0
7839 # Number of implementations of ISO C clock functions
7841 cdl_interface CYGINT_ISO_C_CLOCK_FUNCS {
7842 # No options implement this inferface
7843 # This value cannot be modified here.
7845 # Current value: 0 0
7846 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7847 # CYGINT_ISO_C_CLOCK_FUNCS == 0
7850 # The following properties are affected by this value
7851 # interface CYGINT_ISO_C_CLOCK_FUNCS
7852 # Requires: 1 >= CYGINT_ISO_C_CLOCK_FUNCS
7855 # ISO C clock functions' implementation header
7857 cdl_option CYGBLD_ISO_C_CLOCK_FUNCS_HEADER {
7859 # No user value, uncomment the following line to provide one.
7861 # value_source default
7862 # Default value: 0 0
7865 # Number of implementations of tzset() function
7867 cdl_interface CYGINT_ISO_TZSET {
7868 # No options implement this inferface
7869 # This value cannot be modified here.
7871 # Current value: 0 0
7872 # Requires: 1 >= CYGINT_ISO_TZSET
7873 # CYGINT_ISO_TZSET == 0
7876 # The following properties are affected by this value
7877 # interface CYGINT_ISO_TZSET
7878 # Requires: 1 >= CYGINT_ISO_TZSET
7881 # tzset() implementation header
7883 cdl_option CYGBLD_ISO_TZSET_HEADER {
7885 # No user value, uncomment the following line to provide one.
7887 # value_source default
7888 # Default value: 0 0
7892 # Signal functionality
7894 cdl_component CYGPKG_ISO_SIGNAL {
7895 # There is no associated value.
7899 # Number of implementations of signal numbers
7901 cdl_interface CYGINT_ISO_SIGNAL_NUMBERS {
7902 # No options implement this inferface
7903 # This value cannot be modified here.
7906 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7907 # CYGINT_ISO_SIGNAL_NUMBERS == 0
7910 # The following properties are affected by this value
7911 # interface CYGINT_ISO_SIGNAL_NUMBERS
7912 # Requires: 1 >= CYGINT_ISO_SIGNAL_NUMBERS
7915 # Signal numbering implementation header
7916 # This header provides the mapping of signal
7917 # names (e.g. SIGBUS) to numbers.
7919 cdl_option CYGBLD_ISO_SIGNAL_NUMBERS_HEADER {
7921 # No user value, uncomment the following line to provide one.
7923 # value_source default
7924 # Default value: 0 0
7927 # Number of signal implementations
7929 cdl_interface CYGINT_ISO_SIGNAL_IMPL {
7930 # No options implement this inferface
7931 # This value cannot be modified here.
7934 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7935 # CYGINT_ISO_SIGNAL_IMPL == 0
7938 # The following properties are affected by this value
7939 # interface CYGINT_ISO_SIGNAL_IMPL
7940 # Requires: 1 >= CYGINT_ISO_SIGNAL_IMPL
7943 # Signals implementation header
7945 cdl_option CYGBLD_ISO_SIGNAL_IMPL_HEADER {
7947 # No user value, uncomment the following line to provide one.
7949 # value_source default
7950 # Default value: 0 0
7953 # POSIX real time signals feature test macro
7954 # This defines the POSIX feature test macro
7955 # that indicates that the POSIX real time signals
7958 cdl_interface CYGINT_POSIX_REALTIME_SIGNALS {
7959 # No options implement this inferface
7960 # This value cannot be modified here.
7963 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7964 # CYGINT_POSIX_REALTIME_SIGNALS == 0
7967 # The following properties are affected by this value
7968 # interface CYGINT_POSIX_REALTIME_SIGNALS
7969 # Requires: 1 >= CYGINT_POSIX_REALTIME_SIGNALS
7973 # Non-local jumps functionality
7975 cdl_component CYGPKG_ISO_SETJMP {
7976 # There is no associated value.
7980 # setjmp() / longjmp() implementations
7982 cdl_interface CYGINT_ISO_SETJMP {
7983 # No options implement this inferface
7984 # This value cannot be modified here.
7987 # Requires: 1 >= CYGINT_ISO_SETJMP
7988 # CYGINT_ISO_SETJMP == 0
7991 # The following properties are affected by this value
7992 # interface CYGINT_ISO_SETJMP
7993 # Requires: 1 >= CYGINT_ISO_SETJMP
7996 # setjmp() / longjmp() implementation header
7998 cdl_option CYGBLD_ISO_SETJMP_HEADER {
8000 # No user value, uncomment the following line to provide one.
8002 # value_source default
8003 # Default value: 0 0
8006 # sigsetjmp() / siglongjmp() implementations
8008 cdl_interface CYGINT_ISO_SIGSETJMP {
8009 # No options implement this inferface
8010 # This value cannot be modified here.
8013 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8014 # CYGINT_ISO_SIGSETJMP == 0
8017 # The following properties are affected by this value
8018 # interface CYGINT_ISO_SIGSETJMP
8019 # Requires: 1 >= CYGINT_ISO_SIGSETJMP
8022 # sigsetjmp() / siglongjmp() implementation header
8024 cdl_option CYGBLD_ISO_SIGSETJMP_HEADER {
8026 # No user value, uncomment the following line to provide one.
8028 # value_source default
8029 # Default value: 0 0
8033 # Assertions implementation header
8035 cdl_option CYGBLD_ISO_ASSERT_HEADER {
8037 # No user value, uncomment the following line to provide one.
8039 # value_source default
8040 # Default value: 0 0
8043 # POSIX file control
8044 # This covers the POSIX file control definitions,
8045 # normally found in <fcntl.h>
8047 cdl_component CYGPKG_ISO_POSIX_FCNTL {
8048 # There is no associated value.
8052 # POSIX open flags implementation header
8054 cdl_option CYGBLD_ISO_OFLAG_HEADER {
8056 # No user value, uncomment the following line to provide one.
8058 # value_source default
8059 # Default value: 0 0
8062 # POSIX fcntl() implementations
8064 cdl_interface CYGINT_ISO_FCNTL {
8065 # No options implement this inferface
8066 # This value cannot be modified here.
8069 # Requires: 1 >= CYGINT_ISO_FCNTL
8070 # CYGINT_ISO_FCNTL == 0
8073 # The following properties are affected by this value
8074 # interface CYGINT_ISO_FCNTL
8075 # Requires: 1 >= CYGINT_ISO_FCNTL
8078 # POSIX fcntl() implementation header
8080 cdl_option CYGBLD_ISO_FCNTL_HEADER {
8082 # No user value, uncomment the following line to provide one.
8084 # value_source default
8085 # Default value: 0 0
8088 # POSIX file open implementations
8090 cdl_interface CYGINT_ISO_OPEN {
8091 # No options implement this inferface
8092 # This value cannot be modified here.
8095 # Requires: 1 >= CYGINT_ISO_OPEN
8096 # CYGINT_ISO_OPEN == 0
8099 # The following properties are affected by this value
8100 # interface CYGINT_ISO_OPEN
8101 # Requires: 1 >= CYGINT_ISO_OPEN
8104 # POSIX file open implementation header
8106 cdl_option CYGBLD_ISO_OPEN_HEADER {
8108 # No user value, uncomment the following line to provide one.
8110 # value_source default
8111 # Default value: 0 0
8115 # <sys/stat.h> definitions implementation header
8117 cdl_option CYGBLD_ISO_STAT_DEFS_HEADER {
8119 # No user value, uncomment the following line to provide one.
8121 # value_source default
8122 # Default value: 0 0
8125 # POSIX directory reading implementation
8127 cdl_interface CYGINT_ISO_DIRENT {
8128 # No options implement this inferface
8129 # This value cannot be modified here.
8132 # Requires: 1 >= CYGINT_ISO_DIRENT
8133 # CYGINT_ISO_DIRENT == 0
8136 # The following properties are affected by this value
8137 # interface CYGINT_ISO_DIRENT
8138 # Requires: 1 >= CYGINT_ISO_DIRENT
8141 # <dirent.h> definitions implementation header
8143 cdl_option CYGBLD_ISO_DIRENT_HEADER {
8145 # No user value, uncomment the following line to provide one.
8147 # value_source default
8148 # Default value: 0 0
8151 # POSIX <sys/types.h> contents
8152 # This covers the types required by POSIX to be in
8155 cdl_component CYGPKG_ISO_POSIX_TYPES {
8156 # There is no associated value.
8160 # POSIX thread types implementations
8162 cdl_interface CYGINT_ISO_PTHREADTYPES {
8163 # No options implement this inferface
8164 # This value cannot be modified here.
8167 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8168 # CYGINT_ISO_PTHREADTYPES == 0
8171 # The following properties are affected by this value
8172 # interface CYGINT_ISO_PTHREADTYPES
8173 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8174 # interface CYGINT_ISO_PMUTEXTYPES
8175 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8178 # POSIX thread types implementation header
8180 cdl_option CYGBLD_ISO_PTHREADTYPES_HEADER {
8182 # No user value, uncomment the following line to provide one.
8184 # value_source default
8185 # Default value: 0 0
8188 # POSIX mutex types implementations
8190 cdl_interface CYGINT_ISO_PMUTEXTYPES {
8191 # No options implement this inferface
8192 # This value cannot be modified here.
8195 # Requires: 1 >= CYGINT_ISO_PTHREADTYPES
8196 # CYGINT_ISO_PTHREADTYPES == 0
8200 # POSIX mutex types implementation header
8202 cdl_option CYGBLD_ISO_PMUTEXTYPES_HEADER {
8204 # No user value, uncomment the following line to provide one.
8206 # value_source default
8207 # Default value: 0 0
8210 # ssize_t implementation header
8212 cdl_option CYGBLD_ISO_SSIZE_T_HEADER {
8214 # No user value, uncomment the following line to provide one.
8216 # value_source default
8217 # Default value: 0 0
8220 # Filesystem types implementation header
8222 cdl_option CYGBLD_ISO_FSTYPES_HEADER {
8224 # No user value, uncomment the following line to provide one.
8226 # value_source default
8227 # Default value: 0 0
8230 # gid_t, pid_t, uid_t implementation header
8232 cdl_option CYGBLD_ISO_SCHEDTYPES_HEADER {
8234 # No user value, uncomment the following line to provide one.
8236 # value_source default
8237 # Default value: 0 0
8241 # Non-POSIX <sys/types.h> contents
8242 # This covers the extra types required by non-POSIX
8243 # packages to be in <sys/types.h>. These would normally
8244 # only be visible if _POSIX_SOURCE is not defined.
8246 cdl_component CYGPKG_ISO_EXTRA_TYPES {
8247 # There is no associated value.
8251 # BSD compatible types
8253 cdl_interface CYGINT_ISO_BSDTYPES {
8254 # No options implement this inferface
8255 # This value cannot be modified here.
8258 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8259 # CYGINT_ISO_BSDTYPES == 0
8262 # The following properties are affected by this value
8263 # interface CYGINT_ISO_BSDTYPES
8264 # Requires: 1 >= CYGINT_ISO_BSDTYPES
8269 cdl_option CYGBLD_ISO_BSDTYPES_HEADER {
8271 # No user value, uncomment the following line to provide one.
8273 # value_source default
8274 # Default value: 0 0
8280 cdl_component CYGPKG_ISO_UTSNAME {
8281 # There is no associated value.
8287 cdl_option CYGBLD_ISO_UTSNAME_HEADER {
8289 # No user value, uncomment the following line to provide one.
8291 # value_source default
8292 # Default value: 0 0
8298 cdl_component CYGPKG_ISO_SCHED {
8299 # There is no associated value.
8303 # POSIX scheduler implementations
8305 cdl_interface CYGINT_ISO_SCHED_IMPL {
8306 # No options implement this inferface
8307 # This value cannot be modified here.
8310 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8311 # CYGINT_ISO_SCHED_IMPL == 0
8314 # The following properties are affected by this value
8315 # interface CYGINT_ISO_SCHED_IMPL
8316 # Requires: 1 >= CYGINT_ISO_SCHED_IMPL
8319 # POSIX scheduler implementation header
8321 cdl_option CYGBLD_ISO_SCHED_IMPL_HEADER {
8323 # No user value, uncomment the following line to provide one.
8325 # value_source default
8326 # Default value: 0 0
8332 cdl_component CYGPKG_ISO_SEMAPHORES {
8333 # There is no associated value.
8337 # POSIX semaphore implementations
8339 cdl_interface CYGINT_ISO_SEMAPHORES {
8340 # No options implement this inferface
8341 # This value cannot be modified here.
8344 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8345 # CYGINT_ISO_SEMAPHORES == 0
8348 # The following properties are affected by this value
8349 # interface CYGINT_ISO_SEMAPHORES
8350 # Requires: 1 >= CYGINT_ISO_SEMAPHORES
8353 # POSIX semaphore implementation header
8355 cdl_option CYGBLD_ISO_SEMAPHORES_HEADER {
8357 # No user value, uncomment the following line to provide one.
8359 # value_source default
8360 # Default value: 0 0
8364 # POSIX message queues
8366 cdl_component CYGPKG_ISO_MQUEUE {
8367 # There is no associated value.
8373 cdl_interface CYGINT_ISO_MQUEUE {
8374 # No options implement this inferface
8375 # This value cannot be modified here.
8378 # Requires: 1 >= CYGINT_ISO_MQUEUE
8379 # CYGINT_ISO_MQUEUE == 0
8382 # The following properties are affected by this value
8383 # interface CYGINT_ISO_MQUEUE
8384 # Requires: 1 >= CYGINT_ISO_MQUEUE
8385 # option CYGNUM_ISO_MQUEUE_OPEN_MAX
8386 # ActiveIf: CYGINT_ISO_MQUEUE
8387 # option CYGNUM_ISO_MQUEUE_PRIO_MAX
8388 # ActiveIf: CYGINT_ISO_MQUEUE
8391 # Implementation header
8393 cdl_option CYGBLD_ISO_MQUEUE_HEADER {
8395 # No user value, uncomment the following line to provide one.
8397 # value_source default
8398 # Default value: 0 0
8401 # Maximum number of open message queues
8403 cdl_option CYGNUM_ISO_MQUEUE_OPEN_MAX {
8404 # This option is not active
8405 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8406 # CYGINT_ISO_MQUEUE == 0
8410 # No user value, uncomment the following line to provide one.
8412 # value_source default
8413 # Default value: CYGNUM_POSIX_MQUEUE_OPEN_MAX > 0 ? CYGNUM_POSIX_MQUEUE_OPEN_MAX : 0
8414 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8415 # CYGNUM_POSIX_MQUEUE_OPEN_MAX (unknown) == 0
8419 # Maximum number of message priorities
8421 cdl_option CYGNUM_ISO_MQUEUE_PRIO_MAX {
8422 # This option is not active
8423 # ActiveIf constraint: CYGINT_ISO_MQUEUE
8424 # CYGINT_ISO_MQUEUE == 0
8428 # No user value, uncomment the following line to provide one.
8429 # user_value 1 65535
8430 # value_source default
8431 # Default value: 1 65535
8437 cdl_component CYGPKG_ISO_PTHREAD {
8438 # There is no associated value.
8442 # POSIX pthread implementations
8444 cdl_interface CYGINT_ISO_PTHREAD_IMPL {
8445 # No options implement this inferface
8446 # This value cannot be modified here.
8448 # Current value: 0 0
8449 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8450 # CYGINT_ISO_PTHREAD_IMPL == 0
8453 # The following properties are affected by this value
8454 # interface CYGINT_ISO_PTHREAD_IMPL
8455 # Requires: 1 >= CYGINT_ISO_PTHREAD_IMPL
8458 # POSIX pthread implementation header
8460 cdl_option CYGBLD_ISO_PTHREAD_IMPL_HEADER {
8462 # No user value, uncomment the following line to provide one.
8464 # value_source default
8465 # Default value: 0 0
8468 # POSIX mutex/cond var implementations
8470 cdl_interface CYGINT_ISO_PTHREAD_MUTEX {
8471 # No options implement this inferface
8472 # This value cannot be modified here.
8474 # Current value: 0 0
8475 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8476 # CYGINT_ISO_PTHREAD_MUTEX == 0
8479 # The following properties are affected by this value
8480 # interface CYGINT_ISO_PTHREAD_MUTEX
8481 # Requires: 1 >= CYGINT_ISO_PTHREAD_MUTEX
8484 # POSIX mutex/cond var implementation header
8486 cdl_option CYGBLD_ISO_PTHREAD_MUTEX_HEADER {
8488 # No user value, uncomment the following line to provide one.
8490 # value_source default
8491 # Default value: 0 0
8497 cdl_component CYGPKG_ISO_LIMITS {
8498 # There is no associated value.
8502 # POSIX pthread limits implementations
8504 cdl_interface CYGINT_ISO_POSIX_LIMITS {
8505 # No options implement this inferface
8506 # This value cannot be modified here.
8509 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8510 # CYGINT_ISO_POSIX_LIMITS == 0
8513 # The following properties are affected by this value
8514 # interface CYGINT_ISO_POSIX_LIMITS
8515 # Requires: 1 >= CYGINT_ISO_POSIX_LIMITS
8518 # POSIX pthread limits implementation header
8520 cdl_option CYGBLD_ISO_POSIX_LIMITS_HEADER {
8522 # No user value, uncomment the following line to provide one.
8524 # value_source default
8525 # Default value: 0 0
8528 # OPEN_MAX implementation header
8530 cdl_option CYGBLD_ISO_OPEN_MAX_HEADER {
8532 # No user value, uncomment the following line to provide one.
8534 # value_source default
8535 # Default value: 0 0
8538 # LINK_MAX implementation header
8540 cdl_option CYGBLD_ISO_LINK_MAX_HEADER {
8542 # No user value, uncomment the following line to provide one.
8544 # value_source default
8545 # Default value: 0 0
8548 # NAME_MAX implementation header
8550 cdl_option CYGBLD_ISO_NAME_MAX_HEADER {
8552 # No user value, uncomment the following line to provide one.
8554 # value_source default
8555 # Default value: 0 0
8558 # PATH_MAX implementation header
8560 cdl_option CYGBLD_ISO_PATH_MAX_HEADER {
8562 # No user value, uncomment the following line to provide one.
8564 # value_source default
8565 # Default value: 0 0
8571 cdl_component CYGPKG_ISO_TERMIOS {
8572 # There is no associated value.
8576 # POSIX termios implementations
8578 cdl_interface CYGINT_ISO_TERMIOS {
8579 # No options implement this inferface
8580 # This value cannot be modified here.
8583 # Requires: 1 >= CYGINT_ISO_TERMIOS
8584 # CYGINT_ISO_TERMIOS == 0
8587 # The following properties are affected by this value
8588 # interface CYGINT_ISO_TERMIOS
8589 # Requires: 1 >= CYGINT_ISO_TERMIOS
8592 # POSIX termios implementation header
8594 cdl_option CYGBLD_ISO_TERMIOS_HEADER {
8596 # No user value, uncomment the following line to provide one.
8598 # value_source default
8599 # Default value: 0 0
8605 cdl_component CYGPKG_ISO_DLFCN {
8606 # There is no associated value.
8610 # Dynamic load implementations
8612 cdl_interface CYGINT_ISO_DLFCN {
8613 # No options implement this inferface
8614 # This value cannot be modified here.
8617 # Requires: 1 >= CYGINT_ISO_DLFCN
8618 # CYGINT_ISO_DLFCN == 0
8621 # The following properties are affected by this value
8622 # interface CYGINT_ISO_DLFCN
8623 # Requires: 1 >= CYGINT_ISO_DLFCN
8626 # Dynamic load implementation header
8628 cdl_option CYGBLD_ISO_DLFCN_HEADER {
8630 # No user value, uncomment the following line to provide one.
8632 # value_source default
8633 # Default value: 0 0
8637 # UNIX standard functions
8639 cdl_component CYGPKG_ISO_UNISTD {
8640 # There is no associated value.
8644 # POSIX timer operations implementations
8646 cdl_interface CYGINT_ISO_POSIX_TIMER_OPS {
8647 # No options implement this inferface
8648 # This value cannot be modified here.
8650 # Current value: 0 0
8651 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8652 # CYGINT_ISO_POSIX_TIMER_OPS == 0
8655 # The following properties are affected by this value
8656 # interface CYGINT_ISO_POSIX_TIMER_OPS
8657 # Requires: 1 >= CYGINT_ISO_POSIX_TIMER_OPS
8660 # POSIX timer operations implementation header
8662 cdl_option CYGBLD_ISO_POSIX_TIMER_OPS_HEADER {
8664 # No user value, uncomment the following line to provide one.
8666 # value_source default
8667 # Default value: 0 0
8670 # POSIX sleep() implementations
8672 cdl_interface CYGINT_ISO_POSIX_SLEEP {
8673 # No options implement this inferface
8674 # This value cannot be modified here.
8676 # Current value: 0 0
8677 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8678 # CYGINT_ISO_POSIX_SLEEP == 0
8681 # The following properties are affected by this value
8682 # interface CYGINT_ISO_POSIX_SLEEP
8683 # Requires: 1 >= CYGINT_ISO_POSIX_SLEEP
8686 # POSIX sleep() implementation header
8688 cdl_option CYGBLD_ISO_POSIX_SLEEP_HEADER {
8690 # No user value, uncomment the following line to provide one.
8692 # value_source default
8693 # Default value: 0 0
8697 # select()/poll() functions
8699 cdl_component CYGPKG_ISO_SELECT {
8700 # There is no associated value.
8704 # select() implementations
8706 cdl_interface CYGINT_ISO_SELECT {
8707 # No options implement this inferface
8708 # This value cannot be modified here.
8710 # Current value: 0 0
8711 # Requires: 1 >= CYGINT_ISO_SELECT
8712 # CYGINT_ISO_SELECT == 0
8715 # The following properties are affected by this value
8716 # interface CYGINT_ISO_SELECT
8717 # Requires: 1 >= CYGINT_ISO_SELECT
8720 # select() implementation header
8722 cdl_option CYGBLD_ISO_SELECT_HEADER {
8724 # No user value, uncomment the following line to provide one.
8726 # value_source default
8727 # Default value: 0 0
8730 # poll() implementations
8732 cdl_interface CYGINT_ISO_POLL {
8733 # No options implement this inferface
8734 # This value cannot be modified here.
8736 # Current value: 0 0
8737 # Requires: 1 >= CYGINT_ISO_POLL
8738 # CYGINT_ISO_POLL == 0
8741 # The following properties are affected by this value
8742 # interface CYGINT_ISO_POLL
8743 # Requires: 1 >= CYGINT_ISO_POLL
8746 # poll() implementation header
8748 cdl_option CYGBLD_ISO_POLL_HEADER {
8750 # No user value, uncomment the following line to provide one.
8752 # value_source default
8753 # Default value: 0 0
8757 # NetDB utility functions
8759 cdl_component CYGPKG_ISO_NETDB {
8760 # There is no associated value.
8764 # DNS implementations
8766 cdl_interface CYGINT_ISO_DNS {
8767 # No options implement this inferface
8768 # This value cannot be modified here.
8771 # Requires: 1 >= CYGINT_ISO_DNS
8772 # CYGINT_ISO_DNS == 0
8775 # The following properties are affected by this value
8776 # interface CYGINT_ISO_DNS
8777 # Requires: 1 >= CYGINT_ISO_DNS
8780 # DNS implementation header
8782 cdl_option CYGBLD_ISO_DNS_HEADER {
8784 # No user value, uncomment the following line to provide one.
8786 # value_source default
8787 # Default value: 0 0
8790 # Protocol network database implementations
8792 cdl_interface CYGINT_ISO_NETDB_PROTO {
8793 # No options implement this inferface
8794 # This value cannot be modified here.
8797 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8798 # CYGINT_ISO_NETDB_PROTO == 0
8801 # The following properties are affected by this value
8802 # interface CYGINT_ISO_NETDB_PROTO
8803 # Requires: 1 >= CYGINT_ISO_NETDB_PROTO
8806 # Protocol network database implementation header
8808 cdl_option CYGBLD_ISO_NETDB_PROTO_HEADER {
8810 # No user value, uncomment the following line to provide one.
8812 # value_source default
8813 # Default value: 0 0
8816 # Services network database implementations
8818 cdl_interface CYGINT_ISO_NETDB_SERV {
8819 # No options implement this inferface
8820 # This value cannot be modified here.
8823 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8824 # CYGINT_ISO_NETDB_SERV == 0
8827 # The following properties are affected by this value
8828 # interface CYGINT_ISO_NETDB_SERV
8829 # Requires: 1 >= CYGINT_ISO_NETDB_SERV
8832 # Services network database implementation header
8834 cdl_option CYGBLD_ISO_NETDB_SERV_HEADER {
8836 # No user value, uncomment the following line to provide one.
8838 # value_source default
8839 # Default value: 0 0
8844 # Package specific build options including control over
8845 # compiler flags used only in building this package,
8846 # and details of which tests are built.
8848 cdl_component CYGPKG_ISOINFRA_OPTIONS {
8849 # There is no associated value.
8853 # Additional compiler flags
8854 # This option modifies the set of compiler flags for
8855 # building the ISO C and POSIX infrastructure package.
8856 # These flags are used in addition to the set of global flags.
8858 cdl_option CYGPKG_ISOINFRA_CFLAGS_ADD {
8860 # No user value, uncomment the following line to provide one.
8862 # value_source default
8866 # Suppressed compiler flags
8867 # This option modifies the set of compiler flags for
8868 # building the ISO C and POSIX infrastructure package.
8869 # These flags are removed from the set of global flags
8872 cdl_option CYGPKG_ISOINFRA_CFLAGS_REMOVE {
8874 # No user value, uncomment the following line to provide one.
8876 # value_source default
8883 # doc: ref/services-crc.html
8884 # This package provides support for CRC calculation. Currently
8885 # this is the POSIX 1003 defined CRC algorithm, a 32 CRC by
8886 # Gary S. Brown, and a 16 bit CRC.
8888 cdl_package CYGPKG_CRC {
8889 # Packages cannot be added or removed, nor can their version be changed,
8890 # simply by editing their value. Instead the appropriate configuration
8891 # should be used to perform these actions.
8893 # This value cannot be modified here.
8895 # Current value: 1 current
8897 # The following properties are affected by this value
8898 # package CYGPKG_COMPRESS_ZLIB
8899 # Requires: CYGPKG_CRC
8905 cdl_option CYGPKG_CRC_TESTS {
8906 # Calculated value: "tests/crc_test"
8908 # Current_value: tests/crc_test
8912 # Zlib compress and decompress package
8913 # This package provides support for compression and
8916 cdl_package CYGPKG_COMPRESS_ZLIB {
8917 # Packages cannot be added or removed, nor can their version be changed,
8918 # simply by editing their value. Instead the appropriate configuration
8919 # should be used to perform these actions.
8921 # This value cannot be modified here.
8923 # Current value: 1 current
8924 # Requires: CYGPKG_ISOINFRA
8925 # CYGPKG_ISOINFRA == current
8927 # Requires: CYGPKG_CRC
8928 # CYGPKG_CRC == current
8931 # The following properties are affected by this value
8932 # component CYGBLD_BUILD_REDBOOT_WITH_ZLIB
8933 # ActiveIf: CYGPKG_COMPRESS_ZLIB
8937 # Override memory allocation routines.
8939 cdl_interface CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC {
8940 # Implemented by CYGBLD_BUILD_REDBOOT_WITH_ZLIB, active, enabled
8941 # This value cannot be modified here.
8945 # The following properties are affected by this value
8946 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
8947 # ActiveIf: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8950 # Should deflate() produce 'gzip' compatible output?
8951 # If this option is set then the output of calling deflate()
8952 # will be wrapped up as a 'gzip' compatible file.
8954 cdl_option CYGSEM_COMPRESS_ZLIB_DEFLATE_MAKES_GZIP {
8956 # No user value, uncomment the following line to provide one.
8958 # value_source default
8962 # Does this library need malloc?
8963 # This pseudo-option will force the memalloc library to be
8964 # required iff the application does not provide it's own
8967 cdl_option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC {
8968 # This option is not active
8969 # ActiveIf constraint: CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 0
8970 # CYGINT_COMPRESS_ZLIB_LOCAL_ALLOC == 1
8974 # No user value, uncomment the following line to provide one.
8976 # value_source default
8978 # Requires: CYGPKG_MEMALLOC
8979 # CYGPKG_MEMALLOC == current
8983 # Include stdio-like utility functions
8984 # This option enables the stdio-like zlib utility functions
8985 # (gzread/gzwrite and friends) provided in gzio.c.
8987 cdl_option CYGFUN_COMPRESS_ZLIB_GZIO {
8989 # No user value, uncomment the following line to provide one.
8991 # value_source default
8992 # Default value: CYGPKG_LIBC_STDIO_OPEN ? 1 : 0
8993 # CYGPKG_LIBC_STDIO_OPEN (unknown) == 0
8995 # Requires: CYGINT_ISO_STDIO_FILEPOS
8996 # CYGINT_ISO_STDIO_FILEPOS == 0
8998 # Requires: CYGINT_ISO_STRING_STRFUNCS
8999 # CYGINT_ISO_STRING_STRFUNCS == 1
9001 # Requires: CYGINT_ISO_STDIO_FORMATTED_IO
9002 # CYGINT_ISO_STDIO_FORMATTED_IO == 0
9004 # Requires: CYGINT_ISO_STDIO_FILEACCESS
9005 # CYGINT_ISO_STDIO_FILEACCESS == 0
9009 # Zlib compress and decompress package build options
9010 # Package specific build options including control over
9011 # compiler flags used only in building this package,
9012 # and details of which tests are built.
9014 cdl_component CYGPKG_COMPRESS_ZLIB_OPTIONS {
9015 # There is no associated value.
9019 # Additional compiler flags
9020 # This option modifies the set of compiler flags for
9021 # building this package. These flags are used in addition
9022 # to the set of global flags.
9024 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_ADD {
9026 # No user value, uncomment the following line to provide one.
9027 # user_value "-D__ECOS__ -DNO_ERRNO_H"
9028 # value_source default
9029 # Default value: "-D__ECOS__ -DNO_ERRNO_H"
9032 # Suppressed compiler flags
9033 # This option modifies the set of compiler flags for
9034 # building this package. These flags are removed from
9035 # the set of global flags if present.
9037 cdl_option CYGPKG_COMPRESS_ZLIB_CFLAGS_REMOVE {
9039 # No user value, uncomment the following line to provide one.
9040 # user_value -Wstrict-prototypes
9041 # value_source default
9042 # Default value: -Wstrict-prototypes
9045 # Additional compiler flags
9046 # This option modifies the set of compiler flags for
9047 # building this package. These flags are used in addition
9048 # to the set of global flags.
9050 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_ADD {
9052 # No user value, uncomment the following line to provide one.
9054 # value_source default
9058 # Suppressed compiler flags
9059 # This option modifies the set of compiler flags for
9060 # building this package. These flags are removed from
9061 # the set of global flags if present.
9063 cdl_option CYGPKG_COMPRESS_ZLIB_LDFLAGS_REMOVE {
9065 # No user value, uncomment the following line to provide one.
9067 # value_source default
9074 cdl_option CYGPKG_COMPRESS_ZLIB_TESTS {
9075 # Calculated value: "tests/zlib1.c tests/zlib2.c"
9077 # Current_value: tests/zlib1.c tests/zlib2.c
9081 # FLASH device drivers
9082 # doc: ref/flash.html
9083 # This option enables drivers for basic I/O services on
9086 cdl_package CYGPKG_IO_FLASH {
9087 # Packages cannot be added or removed, nor can their version be changed,
9088 # simply by editing their value. Instead the appropriate configuration
9089 # should be used to perform these actions.
9091 # This value cannot be modified here.
9093 # Current value: 1 current
9094 # Requires: CYGPKG_ISOINFRA
9095 # CYGPKG_ISOINFRA == current
9097 # Requires: CYGINT_ISO_STRING_STRFUNCS
9098 # CYGINT_ISO_STRING_STRFUNCS == 1
9101 # The following properties are affected by this value
9102 # component CYGSEM_REDBOOT_FLASH_CONFIG
9103 # DefaultValue: CYGPKG_IO_FLASH != 0
9104 # package CYGPKG_DEVS_FLASH_ONMXC
9105 # ActiveIf: CYGPKG_IO_FLASH
9109 # Hardware FLASH device drivers
9110 # This option enables the hardware device drivers
9111 # for the current platform.
9113 cdl_interface CYGHWR_IO_FLASH_DEVICE {
9114 # Implemented by CYGPKG_DEVS_FLASH_ONMXC, active, enabled
9115 # This value cannot be modified here.
9119 # The following properties are affected by this value
9120 # component CYGPKG_REDBOOT_FLASH
9121 # ActiveIf: CYGHWR_IO_FLASH_DEVICE
9124 # Hardware FLASH device drivers are not in RAM
9125 # Use of this interface is deprecated.
9126 # Drivers should make sure that the functions are
9127 # linked to RAM by putting them in .2ram sections.
9129 cdl_interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM {
9130 # No options implement this inferface
9131 # This value cannot be modified here.
9133 # Current value: 0 0
9134 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9135 # CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM == 0
9138 # The following properties are affected by this value
9139 # interface CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9140 # Requires: !CYGHWR_IO_FLASH_DEVICE_NOT_IN_RAM
9143 # Hardware can support block locking
9144 # This option will be enabled by devices which can support
9145 # locking (write-protection) of individual blocks.
9147 cdl_interface CYGHWR_IO_FLASH_BLOCK_LOCKING {
9148 # No options implement this inferface
9149 # This value cannot be modified here.
9151 # Current value: 0 0
9153 # The following properties are affected by this value
9154 # option CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL
9155 # ActiveIf: CYGHWR_IO_FLASH_BLOCK_LOCKING != 0
9158 # Hardware cannot support direct access to FLASH memory
9159 # This option will be asserted by devices which cannot support
9160 # direct access to the FLASH memory contents (e.g. EEPROM or NAND
9161 # devices). In these cases, the driver must provide an appropriate
9162 # hardware access function.
9164 cdl_option CYGSEM_IO_FLASH_READ_INDIRECT {
9166 # No user value, uncomment the following line to provide one.
9168 # The inferred value should not be edited directly.
9170 # value_source inferred
9172 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9173 # CYGSEM_IO_FLASH_VERIFY_PROGRAM == 0
9176 # The following properties are affected by this value
9177 # option CYGPRI_REDBOOT_ZLIB_FLASH
9178 # ActiveIf: (!CYGSEM_IO_FLASH_READ_INDIRECT) || CYGPRI_REDBOOT_ZLIB_FLASH_FORCE
9179 # component CYGHWR_DEVS_FLASH_MMC
9180 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9181 # option CYGHWR_DEVS_FLASH_MMC_ESDHC
9182 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9183 # option CYGHWR_DEVS_FLASH_MMC_SD
9184 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9185 # option CYGHWR_DEVS_FLASH_MXC_NAND
9186 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9189 # Display status messages during flash operations
9190 # Selecting this option will cause the drivers to print status
9191 # messages as various flash operations are undertaken.
9193 cdl_option CYGSEM_IO_FLASH_CHATTER {
9195 # No user value, uncomment the following line to provide one.
9197 # value_source default
9201 # Verify data programmed to flash
9202 # Selecting this option will cause verification of data
9203 # programmed to flash.
9205 cdl_option CYGSEM_IO_FLASH_VERIFY_PROGRAM {
9207 # No user value, uncomment the following line to provide one.
9209 # The inferred value should not be edited directly.
9211 # value_source inferred
9214 # The following properties are affected by this value
9215 # option CYGSEM_IO_FLASH_READ_INDIRECT
9216 # Requires: !CYGSEM_IO_FLASH_VERIFY_PROGRAM
9219 # Platform has flash soft DIP switch write-protect
9220 # Selecting this option will cause the state of a hardware jumper or
9221 # dipswitch to be read by software to determine whether the flash is
9222 # write-protected or not.
9224 cdl_option CYGSEM_IO_FLASH_SOFT_WRITE_PROTECT {
9226 # No user value, uncomment the following line to provide one.
9228 # value_source default
9232 # Instantiate in I/O block device API
9233 # Provides a block device accessible using the standard I/O
9234 # API ( cyg_io_read() etc. )
9236 cdl_component CYGPKG_IO_FLASH_BLOCK_DEVICE {
9237 # This option is not active
9238 # ActiveIf constraint: CYGPKG_IO
9239 # CYGPKG_IO (unknown) == 0
9243 # No user value, uncomment the following line to provide one.
9245 # value_source default
9250 # Name of flash device 1 block device
9252 cdl_component CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 {
9253 # This option is not active
9254 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is not active
9255 # The parent CYGPKG_IO_FLASH_BLOCK_DEVICE is disabled
9258 # No user value, uncomment the following line to provide one.
9259 # user_value "\"/dev/flash1\""
9260 # value_source default
9261 # Default value: "\"/dev/flash1\""
9266 cdl_interface CYGINT_IO_FLASH_BLOCK_CFG_1 {
9267 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1, inactive, enabled
9268 # Implemented by CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1, inactive, disabled
9269 # This option is not active
9270 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9272 # This value cannot be modified here.
9275 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9276 # CYGINT_IO_FLASH_BLOCK_CFG_1 == 0
9279 # The following properties are affected by this value
9280 # interface CYGINT_IO_FLASH_BLOCK_CFG_1
9281 # Requires: 1 == CYGINT_IO_FLASH_BLOCK_CFG_1
9284 # Static configuration
9285 # This configures the flash device 1 block device
9286 # with static base and length
9288 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 {
9289 # This option is not active
9290 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9293 # No user value, uncomment the following line to provide one.
9295 # value_source default
9300 # Start offset from flash base
9301 # This gives the offset from the base of flash which this
9302 # block device corresponds to.
9304 cdl_option CYGNUM_IO_FLASH_BLOCK_OFFSET_1 {
9305 # This option is not active
9306 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9309 # No user value, uncomment the following line to provide one.
9310 # user_value 0x00100000
9311 # value_source default
9312 # Default value: 0x00100000
9316 # This gives the length of the region of flash given over
9317 # to this block device.
9319 cdl_option CYGNUM_IO_FLASH_BLOCK_LENGTH_1 {
9320 # This option is not active
9321 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_STATIC_1 is not active
9324 # No user value, uncomment the following line to provide one.
9325 # user_value 0x00100000
9326 # value_source default
9327 # Default value: 0x00100000
9331 # Configuration from FIS
9332 # This configures the flash device 1 block device
9335 cdl_component CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 {
9336 # This option is not active
9337 # The parent CYGDAT_IO_FLASH_BLOCK_DEVICE_NAME_1 is not active
9340 # No user value, uncomment the following line to provide one.
9342 # value_source default
9349 cdl_component CYGDAT_IO_FLASH_BLOCK_FIS_NAME_1 {
9350 # This option is not active
9351 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is not active
9352 # The parent CYGNUM_IO_FLASH_BLOCK_CFG_FIS_1 is disabled
9355 # No user value, uncomment the following line to provide one.
9356 # user_value "\"jffs2\""
9357 # value_source default
9358 # Default value: "\"jffs2\""
9364 # Flash device driver build options
9365 # Package specific build options including control over
9366 # compiler flags used only in building this package,
9367 # and details of which tests are built.
9369 cdl_component CYGPKG_IO_FLASH_OPTIONS {
9370 # There is no associated value.
9374 # Additional compiler flags
9375 # This option modifies the set of compiler flags for
9376 # building the flash device drivers. These flags are used in addition
9377 # to the set of global flags.
9379 cdl_option CYGPKG_IO_FLASH_CFLAGS_ADD {
9381 # No user value, uncomment the following line to provide one.
9383 # value_source default
9387 # Suppressed compiler flags
9388 # This option modifies the set of compiler flags for
9389 # building the flash device drivers. These flags are removed from
9390 # the set of global flags if present.
9392 cdl_option CYGPKG_IO_FLASH_CFLAGS_REMOVE {
9394 # No user value, uncomment the following line to provide one.
9396 # value_source default
9400 # Flash device driver tests
9401 # This option specifies the set of tests for the flash device drivers.
9403 cdl_component CYGPKG_IO_FLASH_TESTS {
9404 # Calculated value: "tests/flash1"
9406 # Current_value: tests/flash1
9410 # Start offset from flash base
9411 # This gives the offset from the base of flash where tests
9412 # can be run. It is important to set this correctly, as an
9413 # incorrect value could allow the tests to write over critical
9414 # portions of the FLASH device and possibly render the target
9415 # board totally non-functional.
9417 cdl_option CYGNUM_IO_FLASH_TEST_OFFSET {
9419 # No user value, uncomment the following line to provide one.
9420 # user_value 0x00100000
9421 # value_source default
9422 # Default value: 0x00100000
9426 # This gives the length of the region of flash used for testing.
9428 cdl_option CYGNUM_IO_FLASH_TEST_LENGTH {
9430 # No user value, uncomment the following line to provide one.
9431 # user_value 0x00100000
9432 # value_source default
9433 # Default value: 0x00100000
9438 # Support FLASH memory on Freescale MXC platforms
9440 cdl_package CYGPKG_DEVS_FLASH_ONMXC {
9441 # Packages cannot be added or removed, nor can their version be changed,
9442 # simply by editing their value. Instead the appropriate configuration
9443 # should be used to perform these actions.
9445 # ActiveIf constraint: CYGPKG_IO_FLASH
9446 # CYGPKG_IO_FLASH == current
9449 # This value cannot be modified here.
9451 # Current value: 1 current
9455 # MXC platform MMC card support
9456 # When this option is enabled, it indicates MMC card is
9457 # supported on the MXC platforms
9459 cdl_component CYGHWR_DEVS_FLASH_MMC {
9461 # No user value, uncomment the following line to provide one.
9463 # value_source default
9465 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9466 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9469 # The following properties are affected by this value
9470 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9471 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9472 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9473 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9474 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9475 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9476 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9477 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9481 # MXC platform MMC card for newer SDHC controllers
9483 cdl_option CYGHWR_DEVS_FLASH_MMC_ESDHC {
9484 # This option is not active
9485 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9486 # ActiveIf constraint: CYGPKG_HAL_ARM_MX37 || CYGPKG_HAL_ARM_MX35 ||
9487 # CYGPKG_HAL_ARM_MX25 || CYGPKG_HAL_ARM_MX51 || CYGPKG_HAL_ARM_MX53
9488 # CYGPKG_HAL_ARM_MX37 (unknown) == 0
9489 # CYGPKG_HAL_ARM_MX35 (unknown) == 0
9490 # CYGPKG_HAL_ARM_MX25 (unknown) == 0
9491 # CYGPKG_HAL_ARM_MX51 (unknown) == 0
9492 # CYGPKG_HAL_ARM_MX53 == current
9496 # No user value, uncomment the following line to provide one.
9498 # value_source default
9500 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9501 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9505 # MXC platform MMC card for older MMC/SD controllers
9507 cdl_option CYGHWR_DEVS_FLASH_MMC_SD {
9508 # This option is not active
9509 # The parent CYGHWR_DEVS_FLASH_MMC is disabled
9510 # ActiveIf constraint: CYGPKG_HAL_ARM_MX31_3STACK || CYGPKG_HAL_ARM_MX31ADS
9511 # CYGPKG_HAL_ARM_MX31_3STACK (unknown) == 0
9512 # CYGPKG_HAL_ARM_MX31ADS (unknown) == 0
9516 # No user value, uncomment the following line to provide one.
9518 # value_source default
9520 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9521 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9526 # MXC platform NOR flash memory support
9527 # When this option is enabled, it indicates NOR flash is
9528 # supported on the MXC platforms
9530 cdl_option CYGHWR_DEVS_FLASH_MXC_NOR {
9532 # No user value, uncomment the following line to provide one.
9534 # The inferred value should not be edited directly.
9536 # value_source inferred
9539 # The following properties are affected by this value
9540 # option CYGHWR_DEVS_FLASH_IMX_SPI_NOR
9541 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9542 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9543 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9544 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9545 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9546 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9547 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9548 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9549 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9552 # MXC platform NAND flash memory support
9553 # When this option is enabled, it indicates NAND flash is
9554 # supported on the MXC platforms
9556 cdl_option CYGHWR_DEVS_FLASH_MXC_NAND {
9558 # No user value, uncomment the following line to provide one.
9560 # The inferred value should not be edited directly.
9562 # value_source inferred
9564 # Requires: CYGSEM_IO_FLASH_READ_INDIRECT == 1
9565 # CYGSEM_IO_FLASH_READ_INDIRECT == 1
9568 # The following properties are affected by this value
9569 # component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH
9570 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9571 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9572 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9573 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9574 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9575 # option CYGHWR_DEVS_FLASH_MXC_MULTI
9576 # ActiveIf: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9577 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9578 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9579 # interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND
9580 # ActiveIf: CYGHWR_DEVS_FLASH_MXC_NAND
9583 # i.MX platform SPI NOR flash memory support
9584 # When this option is enabled, it indicates SPI NOR flash is
9585 # supported on the i.MX platforms
9587 cdl_option CYGHWR_DEVS_FLASH_IMX_SPI_NOR {
9589 # No user value, uncomment the following line to provide one.
9591 # value_source default
9593 # Requires: CYGHWR_DEVS_FLASH_MXC_NOR == 1
9594 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9598 # MXC platform ATA support
9599 # When this option is enabled, it indicates ATA is
9600 # supported on the MXC platforms
9602 cdl_option CYGHWR_DEVS_FLASH_MXC_ATA {
9604 # No user value, uncomment the following line to provide one.
9606 # value_source default
9610 # Use a flash based Bad Block Table
9612 cdl_component CYGPKG_DEVS_FLASH_NAND_BBT_IN_FLASH {
9613 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9614 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9617 # There is no associated value.
9621 # When this option is enabled, the driver will search for a flash
9622 # based bad block table
9624 cdl_option CYGHWR_DEVS_FLASH_MXC_BBT_IN_FLASH {
9626 # No user value, uncomment the following line to provide one.
9628 # value_source default
9632 # header file defining the NAND BBT descriptor
9633 # defines the name of the header file that describes the BBT layout
9635 cdl_component CYGHWR_FLASH_NAND_BBT_HEADER {
9637 # No user value, uncomment the following line to provide one.
9639 # The inferred value should not be edited directly.
9640 inferred_value 1 <cyg/io/tx53_nand_bbt.h>
9641 # value_source inferred
9642 # Default value: 0 0
9645 # Number of blocks to reserve for BBT
9646 # Number of blocks to reserve for BBT
9648 cdl_option CYGNUM_FLASH_NAND_BBT_BLOCKS {
9650 # No user value, uncomment the following line to provide one.
9652 # value_source default
9657 # MXC platform multi flash memory support
9658 # When this option is enabled, it indicates multi flashes are
9659 # supported on the MXC platforms (like NAND and NOR)
9661 cdl_option CYGHWR_DEVS_FLASH_MXC_MULTI {
9662 # This option is not active
9663 # ActiveIf constraint: (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MXC_NOR) ||
9664 # (CYGHWR_DEVS_FLASH_MXC_NAND && CYGHWR_DEVS_FLASH_MMC) ||
9665 # (CYGHWR_DEVS_FLASH_MXC_NOR && CYGHWR_DEVS_FLASH_MMC)
9666 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9667 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9668 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9669 # CYGHWR_DEVS_FLASH_MMC == 0
9670 # CYGHWR_DEVS_FLASH_MXC_NOR == 0
9671 # CYGHWR_DEVS_FLASH_MMC == 0
9675 # No user value, uncomment the following line to provide one.
9677 # The inferred value should not be edited directly.
9679 # value_source inferred
9683 # MXC platform NAND flash reset workaround support
9684 # When this option is enabled, it indicates 0xFFFF is used for
9685 # the NAND reset command instead of 0xFF.
9687 cdl_interface CYGHWR_DEVS_FLASH_MXC_NAND_RESET_WORKAROUND {
9688 # No options implement this inferface
9689 # ActiveIf constraint: CYGHWR_DEVS_FLASH_MXC_NAND
9690 # CYGHWR_DEVS_FLASH_MXC_NAND == 1
9693 # This value cannot be modified here.
9700 # Dynamic memory allocation
9701 # doc: ref/memalloc.html
9702 # This package provides memory allocator infrastructure required for
9703 # dynamic memory allocators, including the ISO standard malloc
9704 # interface. It also contains some sample implementations.
9706 cdl_package CYGPKG_MEMALLOC {
9707 # Packages cannot be added or removed, nor can their version be changed,
9708 # simply by editing their value. Instead the appropriate configuration
9709 # should be used to perform these actions.
9711 # This value cannot be modified here.
9713 # Current value: 1 current
9715 # The following properties are affected by this value
9716 # option CYGSEM_COMPRESS_ZLIB_NEEDS_MALLOC
9717 # Requires: CYGPKG_MEMALLOC
9721 # Memory allocator implementations
9722 # This component contains configuration options related to the
9723 # various memory allocators available.
9725 cdl_component CYGPKG_MEMALLOC_ALLOCATORS {
9726 # There is no associated value.
9730 # Fixed block allocator
9731 # This component contains configuration options related to the
9732 # fixed block memory allocator.
9734 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_FIXED {
9735 # There is no associated value.
9740 # With this option enabled, this allocator will be
9741 # made thread-safe. Additionally allocation functions
9742 # are made available that allow a thread to wait
9743 # until memory is available.
9745 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_FIXED_THREADAWARE {
9746 # This option is not active
9747 # ActiveIf constraint: CYGPKG_KERNEL
9748 # CYGPKG_KERNEL (unknown) == 0
9752 # No user value, uncomment the following line to provide one.
9754 # value_source default
9759 # Simple variable block allocator
9760 # This component contains configuration options related to the
9761 # simple variable block memory allocator. This allocator is not
9762 # very fast, and in particular does not scale well with large
9763 # numbers of allocations. It is however very compact in terms of
9764 # code size and does not have very much overhead per allocation.
9766 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_VARIABLE {
9767 # There is no associated value.
9772 # With this option enabled, this allocator will be
9773 # made thread-safe. Additionally allocation functions
9774 # are added that allow a thread to wait until memory
9775 # are made available that allow a thread to wait
9776 # until memory is available.
9778 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_THREADAWARE {
9779 # This option is not active
9780 # ActiveIf constraint: CYGPKG_KERNEL
9781 # CYGPKG_KERNEL (unknown) == 0
9785 # No user value, uncomment the following line to provide one.
9787 # value_source default
9792 # The variable-block memory allocator can perform coalescing
9793 # of memory whenever the application code releases memory back
9794 # to the pool. This coalescing reduces the possibility of
9795 # memory fragmentation problems, but involves extra code and
9798 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE {
9800 # No user value, uncomment the following line to provide one.
9802 # value_source default
9805 # The following properties are affected by this value
9806 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
9807 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
9812 # This component contains configuration options related to the
9813 # port of Doug Lea's memory allocator, normally known as
9814 # dlmalloc. dlmalloc has a reputation for being both fast
9815 # and space-conserving, as well as resisting fragmentation well.
9816 # It is a common choice for a general purpose allocator and
9817 # has been used in both newlib and Linux glibc.
9819 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_DLMALLOC {
9820 # There is no associated value.
9825 # Doug Lea's malloc implementation has substantial amounts
9826 # of internal checking in order to verify the operation
9827 # and consistency of the allocator. However this imposes
9828 # substantial overhead on each operation. Therefore this
9829 # checking may be individually disabled.
9831 cdl_option CYGDBG_MEMALLOC_ALLOCATOR_DLMALLOC_DEBUG {
9833 # No user value, uncomment the following line to provide one.
9835 # value_source default
9836 # Default value: 0 != CYGDBG_USE_ASSERTS
9837 # CYGDBG_USE_ASSERTS == 0
9839 # Requires: CYGDBG_USE_ASSERTS
9840 # CYGDBG_USE_ASSERTS == 0
9845 # With this option enabled, this allocator will be
9846 # made thread-safe. Additionally allocation functions
9847 # are made available that allow a thread to wait
9848 # until memory is available.
9850 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_THREADAWARE {
9851 # This option is not active
9852 # ActiveIf constraint: CYGPKG_KERNEL
9853 # CYGPKG_KERNEL (unknown) == 0
9857 # No user value, uncomment the following line to provide one.
9859 # value_source default
9861 # Requires: CYGPKG_KERNEL
9862 # CYGPKG_KERNEL (unknown) == 0
9866 # Support more than one instance
9867 # Having this option disabled allows important
9868 # implementation structures to be declared as a single
9869 # static instance, allowing faster access. However this
9870 # would fail if there is more than one instance of
9871 # the dlmalloc allocator class. Therefore this option can
9872 # be enabled if multiple instances are required. Note: as
9873 # a special case, if this allocator is used as the
9874 # implementation of malloc, and it can be determined there
9875 # is more than one malloc pool, then this option will be
9878 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_SAFE_MULTIPLE {
9880 # No user value, uncomment the following line to provide one.
9882 # value_source default
9886 # Use system memmove() and memset()
9887 # This may be used to control whether memset() and memmove()
9888 # are used within the implementation. The alternative is
9889 # to use some macro equivalents, which some people report
9890 # are faster in some circumstances.
9892 cdl_option CYGIMP_MEMALLOC_ALLOCATOR_DLMALLOC_USE_MEMCPY {
9894 # No user value, uncomment the following line to provide one.
9896 # value_source default
9897 # Default value: 0 != CYGPKG_ISOINFRA
9898 # CYGPKG_ISOINFRA == current
9900 # Requires: CYGPKG_ISOINFRA
9901 # CYGPKG_ISOINFRA == current
9905 # Minimum alignment of allocated blocks
9906 # This option controls the minimum alignment that the
9907 # allocated memory blocks are aligned on, specified as
9908 # 2^N. Note that using large mininum alignments can lead
9909 # to excessive memory wastage.
9911 cdl_option CYGNUM_MEMALLOC_ALLOCATOR_DLMALLOC_ALIGNMENT {
9913 # No user value, uncomment the following line to provide one.
9915 # value_source default
9917 # Legal values: 3 to 10
9921 # Variable block allocator with separate metadata
9922 # This component contains configuration options related to the
9923 # variable block memory allocator with separate metadata.
9925 cdl_component CYGPKG_MEMALLOC_ALLOCATOR_SEPMETA {
9926 # There is no associated value.
9931 # With this option enabled, this allocator will be
9932 # made thread-safe. Additionally allocation functions
9933 # are made available that allow a thread to wait
9934 # until memory is available.
9936 cdl_option CYGSEM_MEMALLOC_ALLOCATOR_SEPMETA_THREADAWARE {
9937 # This option is not active
9938 # ActiveIf constraint: CYGPKG_KERNEL
9939 # CYGPKG_KERNEL (unknown) == 0
9943 # No user value, uncomment the following line to provide one.
9945 # value_source default
9951 # Kernel C API support for memory allocation
9952 # This option must be enabled to provide the extensions required
9953 # to support integration into the kernel C API.
9955 cdl_option CYGFUN_MEMALLOC_KAPI {
9956 # This option is not active
9957 # ActiveIf constraint: CYGPKG_KERNEL
9958 # CYGPKG_KERNEL (unknown) == 0
9962 # No user value, uncomment the following line to provide one.
9964 # value_source default
9965 # Default value: CYGFUN_KERNEL_API_C
9966 # CYGFUN_KERNEL_API_C (unknown) == 0
9970 # malloc(0) returns NULL
9971 # This option controls the behavior of malloc(0) ( or calloc with
9972 # either argument 0 ). It is permitted by the standard to return
9973 # either a NULL pointer or a unique pointer. Enabling this option
9974 # forces a NULL pointer to be returned.
9976 cdl_option CYGSEM_MEMALLOC_MALLOC_ZERO_RETURNS_NULL {
9978 # No user value, uncomment the following line to provide one.
9980 # value_source default
9984 # Breakpoint site when running out of memory
9985 # Whenever the system runs out of memory, it invokes this function
9986 # before either going to sleep waiting for memory to become
9987 # available or returning failure.
9989 cdl_option CYGSEM_MEMALLOC_INVOKE_OUT_OF_MEMORY {
9991 # No user value, uncomment the following line to provide one.
9993 # value_source default
9997 # malloc() and supporting allocators
9998 # This component enables support for dynamic memory
9999 # allocation as supplied by the functions malloc(),
10000 # free(), calloc() and realloc(). As these
10001 # functions are often used, but can have quite an
10002 # overhead, disabling them here can ensure they
10003 # cannot even be used accidentally when static
10004 # allocation is preferred. Within this component are
10005 # various allocators that can be selected for use
10006 # as the underlying implementation of the dynamic
10007 # allocation functions.
10009 cdl_component CYGPKG_MEMALLOC_MALLOC_ALLOCATORS {
10010 # ActiveIf constraint: CYGPKG_ISOINFRA
10011 # CYGPKG_ISOINFRA == current
10015 # No user value, uncomment the following line to provide one.
10017 # value_source default
10022 # Use external heap definition
10023 # This option allows other components in the
10024 # system to override the default system
10025 # provision of heap memory pools. This should
10026 # be set to a header which provides the equivalent
10027 # definitions to <pkgconf/heaps.hxx>.
10029 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_HEAP_H {
10031 # No user value, uncomment the following line to provide one.
10033 # value_source default
10034 # Default value: 0 0
10037 # Use external implementation of joining multiple heaps
10038 # The default implementation of joining multiple heaps
10039 # is fine for the case where there are multiple disjoint
10040 # memory regions of the same type. However, in a system
10041 # there might be e.g. a small amount of internal SRAM and
10042 # a large amount of external DRAM. The SRAM is faster and
10043 # the DRAM is slower. An application can implement some
10044 # heuristic to choose which pool to allocate from. This
10045 # heuristic can be highly application specific.
10047 cdl_component CYGBLD_MEMALLOC_MALLOC_EXTERNAL_JOIN_H {
10049 # No user value, uncomment the following line to provide one.
10051 # value_source default
10052 # Default value: 0 0
10055 # malloc() allocator implementations
10057 cdl_interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS {
10058 # Implemented by CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE, active, disabled
10059 # Implemented by CYGIMP_MEMALLOC_MALLOC_DLMALLOC, active, enabled
10060 # This value cannot be modified here.
10063 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10064 # CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10067 # The following properties are affected by this value
10068 # interface CYGINT_MEMALLOC_MALLOC_ALLOCATORS
10069 # Requires: CYGINT_MEMALLOC_MALLOC_ALLOCATORS == 1
10072 # malloc() implementation instantiation data
10073 # Memory allocator implementations that are capable of being
10074 # used underneath malloc() must be instantiated. The code
10075 # to do this is set in this option. It is only intended to
10076 # be set by the implementation, not the user.
10078 cdl_option CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER {
10080 # No user value, uncomment the following line to provide one.
10081 # user_value <cyg/memalloc/dlmalloc.hxx>
10082 # value_source default
10083 # Default value: <cyg/memalloc/dlmalloc.hxx>
10085 # The following properties are affected by this value
10086 # option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE
10087 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10088 # option CYGIMP_MEMALLOC_MALLOC_DLMALLOC
10089 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10092 # Simple variable block implementation
10093 # This causes malloc() to use the simple
10094 # variable block allocator.
10096 cdl_option CYGIMP_MEMALLOC_MALLOC_VARIABLE_SIMPLE {
10098 # No user value, uncomment the following line to provide one.
10100 # value_source default
10102 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/memvar.hxx>"
10103 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10105 # Requires: CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE
10106 # CYGSEM_MEMALLOC_ALLOCATOR_VARIABLE_COALESCE == 1
10110 # Doug Lea's malloc implementation
10111 # This causes malloc() to use a version of Doug Lea's
10112 # malloc (dlmalloc) as the underlying implementation.
10114 cdl_option CYGIMP_MEMALLOC_MALLOC_DLMALLOC {
10116 # No user value, uncomment the following line to provide one.
10118 # value_source default
10120 # Requires: CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == "<cyg/memalloc/dlmalloc.hxx>"
10121 # CYGBLD_MEMALLOC_MALLOC_IMPLEMENTATION_HEADER == <cyg/memalloc/dlmalloc.hxx>
10126 # Size of the fallback dynamic memory pool in bytes
10127 # If *no* heaps are configured in your memory layout,
10128 # dynamic memory allocation by
10129 # malloc() and calloc() must be from a fixed-size,
10130 # contiguous memory pool (note here that it is the
10131 # pool that is of a fixed size, but malloc() is still
10132 # able to allocate variable sized chunks of memory
10133 # from it). This option is the size
10134 # of that pool, in bytes. Note that not all of
10135 # this is available for programs to
10136 # use - some is needed for internal information
10137 # about memory regions, and some may be lost to
10138 # ensure that memory allocation only returns
10139 # memory aligned on word (or double word)
10140 # boundaries - a very common architecture
10143 cdl_option CYGNUM_MEMALLOC_FALLBACK_MALLOC_POOL_SIZE {
10145 # No user value, uncomment the following line to provide one.
10147 # value_source default
10148 # Default value: 16384
10149 # Legal values: 32 to 0x7fffffff
10152 # Common memory allocator package build options
10153 # Package specific build options including control over
10154 # compiler flags used only in building this package,
10155 # and details of which tests are built.
10157 cdl_component CYGPKG_MEMALLOC_OPTIONS {
10158 # There is no associated value.
10162 # Additional compiler flags
10163 # This option modifies the set of compiler flags for
10164 # building this package. These flags are used in addition
10165 # to the set of global flags.
10167 cdl_option CYGPKG_MEMALLOC_CFLAGS_ADD {
10169 # No user value, uncomment the following line to provide one.
10170 # user_value "-fno-rtti -Woverloaded-virtual"
10171 # value_source default
10172 # Default value: "-fno-rtti -Woverloaded-virtual"
10175 # Suppressed compiler flags
10176 # This option modifies the set of compiler flags for
10177 # building this package. These flags are removed from
10178 # the set of global flags if present.
10180 cdl_option CYGPKG_MEMALLOC_CFLAGS_REMOVE {
10182 # No user value, uncomment the following line to provide one.
10183 # user_value -Wno-pointer-sign
10184 # value_source default
10185 # Default value: -Wno-pointer-sign
10189 # This option specifies the set of tests for this package.
10191 cdl_option CYGPKG_MEMALLOC_TESTS {
10192 # Calculated value: "tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2"
10194 # Current_value: tests/dlmalloc1 tests/dlmalloc2 tests/heaptest tests/kmemfix1 tests/kmemvar1 tests/malloc1 tests/malloc2 tests/malloc3 tests/malloc4 tests/memfix1 tests/memfix2 tests/memvar1 tests/memvar2 tests/realloc tests/sepmeta1 tests/sepmeta2
10199 # Common error code support
10200 # This package contains the common list of error and
10201 # status codes. It is held centrally to allow
10202 # packages to interchange error codes and status
10203 # codes in a common way, rather than each package
10204 # having its own conventions for error/status
10205 # reporting. The error codes are modelled on the
10206 # POSIX style naming e.g. EINVAL etc. This package
10207 # also provides the standard strerror() function to
10208 # convert error codes to textual representation, as
10209 # well as an implementation of the errno idiom.
10211 cdl_package CYGPKG_ERROR {
10212 # Packages cannot be added or removed, nor can their version be changed,
10213 # simply by editing their value. Instead the appropriate configuration
10214 # should be used to perform these actions.
10216 # This value cannot be modified here.
10218 # Current value: 1 current
10219 # Requires: CYGBLD_ISO_ERRNO_CODES_HEADER == "<cyg/error/codes.h>"
10220 # CYGBLD_ISO_ERRNO_CODES_HEADER == <cyg/error/codes.h>
10226 # This package controls the behaviour of the
10227 # errno variable (or more strictly, expression)
10230 cdl_component CYGPKG_ERROR_ERRNO {
10232 # No user value, uncomment the following line to provide one.
10234 # value_source default
10236 # Requires: CYGBLD_ISO_ERRNO_HEADER == "<cyg/error/errno.h>"
10237 # CYGBLD_ISO_ERRNO_HEADER == <cyg/error/errno.h>
10243 # This option controls whether the standard error
10244 # code reporting variable errno is a per-thread
10245 # variable, rather than global.
10247 cdl_option CYGSEM_ERROR_PER_THREAD_ERRNO {
10249 # No user value, uncomment the following line to provide one.
10251 # The inferred value should not be edited directly.
10253 # value_source inferred
10255 # Requires: CYGVAR_KERNEL_THREADS_DATA
10256 # CYGVAR_KERNEL_THREADS_DATA (unknown) == 0
10261 # Trace verbosity level for debugging the errno
10262 # retrieval mechanism in errno.cxx. Increase this
10263 # value to get additional trace output.
10265 cdl_option CYGNUM_ERROR_ERRNO_TRACE_LEVEL {
10267 # No user value, uncomment the following line to provide one.
10269 # value_source default
10271 # Legal values: 0 to 1
10275 # strerror function
10276 # This package controls the presence and behaviour of the
10277 # strerror() function from <string.h>
10279 cdl_option CYGPKG_ERROR_STRERROR {
10281 # No user value, uncomment the following line to provide one.
10283 # value_source default
10285 # Requires: CYGBLD_ISO_STRERROR_HEADER == "<cyg/error/strerror.h>"
10286 # CYGBLD_ISO_STRERROR_HEADER == <cyg/error/strerror.h>
10290 # Error package build options
10291 # Package specific build options including control over
10292 # compiler flags used only in building this package,
10293 # and details of which tests are built.
10295 cdl_component CYGPKG_ERROR_OPTIONS {
10296 # There is no associated value.
10300 # Additional compiler flags
10301 # This option modifies the set of compiler flags for
10302 # building the error package. These flags are used in addition
10303 # to the set of global flags.
10305 cdl_option CYGPKG_ERROR_CFLAGS_ADD {
10307 # No user value, uncomment the following line to provide one.
10309 # value_source default
10310 # Default value: ""
10313 # Suppressed compiler flags
10314 # This option modifies the set of compiler flags for
10315 # building the error package. These flags are removed from
10316 # the set of global flags if present.
10318 cdl_option CYGPKG_ERROR_CFLAGS_REMOVE {
10320 # No user value, uncomment the following line to provide one.
10321 # user_value -Wno-pointer-sign
10322 # value_source default
10323 # Default value: -Wno-pointer-sign
10328 # I2C driver for FSL MXC-based platforms
10330 cdl_package CYGPKG_DEVS_MXC_I2C {
10331 # Packages cannot be added or removed, nor can their version be changed,
10332 # simply by editing their value. Instead the appropriate configuration
10333 # should be used to perform these actions.
10335 # This value cannot be modified here.
10337 # Current value: 1 current
10340 # ipu driver for mxc
10342 cdl_package CYGPKG_DEVS_IMX_IPU {
10343 # Packages cannot be added or removed, nor can their version be changed,
10344 # simply by editing their value. Instead the appropriate configuration
10345 # should be used to perform these actions.
10347 # This value cannot be modified here.
10349 # Current value: 1 current
10351 # The following properties are affected by this value
10352 # option CYGHWR_MX53_LCD_LOGO
10353 # ActiveIf: CYGPKG_DEVS_IMX_IPU
10357 # IPU version 3EX support
10358 # When this option is enabled, it indicates the IPU version
10361 cdl_option CYGHWR_DEVS_IPU_3_EX {
10363 # No user value, uncomment the following line to provide one.
10365 # The inferred value should not be edited directly.
10367 # value_source inferred
10371 # IPU version 3D support
10372 # When this option is enabled, it indicates the IPU version
10375 cdl_option CYGHWR_DEVS_IPU_3_D {
10377 # No user value, uncomment the following line to provide one.
10379 # value_source default