PXA: pxa-regs.h cleanup

[karo-tx-uboot.git] / arch / arm / include / asm / arch-pxa / pxa-regs.h

/*
 *  linux/include/asm-arm/arch-pxa/pxa-regs.h
 *
 *  Author:     Nicolas Pitre
 *  Created:    Jun 15, 2001
 *  Copyright:  MontaVista Software Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de
 *   Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions.
 *   Added include for hardware.h (for __REG definition)
 */
#ifndef _PXA_REGS_H_
#define _PXA_REGS_H_

#include "bitfield.h"
#include "hardware.h"

/* FIXME hack so that SA-1111.h will work [cb] */

#ifndef __ASSEMBLY__
typedef unsigned short  Word16 ;
typedef unsigned int    Word32 ;
typedef Word32          Word ;
typedef Word            Quad [4] ;
typedef void            *Address ;
typedef void            (*ExcpHndlr) (void) ;
#endif

/*
 * PXA Chip selects
 */
#ifdef CONFIG_CPU_MONAHANS
#define PXA_CS0_PHYS   0x00000000 /* for both small and large same start */
#define PXA_CS1_PHYS   0x04000000 /* Small partition start address (64MB) */
#define PXA_CS1_LPHYS  0x30000000 /* Large partition start address (256MB) */
#define PXA_CS2_PHYS   0x10000000 /* (64MB) */
#define PXA_CS3_PHYS   0x14000000 /* (64MB) */
#define PXA_PCMCIA_PHYS        0x20000000 /* (256MB) */
#else
#define PXA_CS0_PHYS    0x00000000
#define PXA_CS1_PHYS    0x04000000
#define PXA_CS2_PHYS    0x08000000
#define PXA_CS3_PHYS    0x0C000000
#define PXA_CS4_PHYS    0x10000000
#define PXA_CS5_PHYS    0x14000000
#endif /* CONFIG_CPU_MONAHANS */

/*
 * Personal Computer Memory Card International Association (PCMCIA) sockets
 */
#define PCMCIAPrtSp     0x04000000      /* PCMCIA Partition Space [byte]   */
#define PCMCIASp        (4*PCMCIAPrtSp) /* PCMCIA Space [byte]             */
#define PCMCIAIOSp      PCMCIAPrtSp     /* PCMCIA I/O Space [byte]         */
#define PCMCIAAttrSp    PCMCIAPrtSp     /* PCMCIA Attribute Space [byte]   */
#define PCMCIAMemSp     PCMCIAPrtSp     /* PCMCIA Memory Space [byte]      */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define PCMCIA0Sp       PCMCIASp        /* PCMCIA 0 Space [byte]           */
#define PCMCIA0IOSp     PCMCIAIOSp      /* PCMCIA 0 I/O Space [byte]       */
#define PCMCIA0AttrSp   PCMCIAAttrSp    /* PCMCIA 0 Attribute Space [byte] */
#define PCMCIA0MemSp    PCMCIAMemSp     /* PCMCIA 0 Memory Space [byte]    */
#endif

#define PCMCIA1Sp       PCMCIASp        /* PCMCIA 1 Space [byte]           */
#define PCMCIA1IOSp     PCMCIAIOSp      /* PCMCIA 1 I/O Space [byte]       */
#define PCMCIA1AttrSp   PCMCIAAttrSp    /* PCMCIA 1 Attribute Space [byte] */
#define PCMCIA1MemSp    PCMCIAMemSp     /* PCMCIA 1 Memory Space [byte]    */

#define _PCMCIA(Nb)                     /* PCMCIA [0..1]                   */ \
                        (0x20000000 + (Nb)*PCMCIASp)
#define _PCMCIAIO(Nb)   _PCMCIA (Nb)    /* PCMCIA I/O [0..1]               */
#define _PCMCIAAttr(Nb)                 /* PCMCIA Attribute [0..1]         */ \
                        (_PCMCIA (Nb) + 2*PCMCIAPrtSp)
#define _PCMCIAMem(Nb)                  /* PCMCIA Memory [0..1]            */ \
                        (_PCMCIA (Nb) + 3*PCMCIAPrtSp)

#define _PCMCIA0        _PCMCIA (0)     /* PCMCIA 0                        */
#define _PCMCIA0IO      _PCMCIAIO (0)   /* PCMCIA 0 I/O                    */
#define _PCMCIA0Attr    _PCMCIAAttr (0) /* PCMCIA 0 Attribute              */
#define _PCMCIA0Mem     _PCMCIAMem (0)  /* PCMCIA 0 Memory                 */

#ifndef CONFIG_CPU_MONAHANS             /* Monahans supports only one slot */
#define _PCMCIA1        _PCMCIA (1)     /* PCMCIA 1                        */
#define _PCMCIA1IO      _PCMCIAIO (1)   /* PCMCIA 1 I/O                    */
#define _PCMCIA1Attr    _PCMCIAAttr (1) /* PCMCIA 1 Attribute              */
#define _PCMCIA1Mem     _PCMCIAMem (1)  /* PCMCIA 1 Memory                 */
#endif

/*
 * DMA Controller
 */
#define DCSR0           0x40000000  /* DMA Control / Status Register for Channel 0 */
#define DCSR1           0x40000004  /* DMA Control / Status Register for Channel 1 */
#define DCSR2           0x40000008  /* DMA Control / Status Register for Channel 2 */
#define DCSR3           0x4000000c  /* DMA Control / Status Register for Channel 3 */
#define DCSR4           0x40000010  /* DMA Control / Status Register for Channel 4 */
#define DCSR5           0x40000014  /* DMA Control / Status Register for Channel 5 */
#define DCSR6           0x40000018  /* DMA Control / Status Register for Channel 6 */
#define DCSR7           0x4000001c  /* DMA Control / Status Register for Channel 7 */
#define DCSR8           0x40000020  /* DMA Control / Status Register for Channel 8 */
#define DCSR9           0x40000024  /* DMA Control / Status Register for Channel 9 */
#define DCSR10          0x40000028  /* DMA Control / Status Register for Channel 10 */
#define DCSR11          0x4000002c  /* DMA Control / Status Register for Channel 11 */
#define DCSR12          0x40000030  /* DMA Control / Status Register for Channel 12 */
#define DCSR13          0x40000034  /* DMA Control / Status Register for Channel 13 */
#define DCSR14          0x40000038  /* DMA Control / Status Register for Channel 14 */
#define DCSR15          0x4000003c  /* DMA Control / Status Register for Channel 15 */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define DCSR16          0x40000040  /* DMA Control / Status Register for Channel 16 */
#define DCSR17          0x40000044  /* DMA Control / Status Register for Channel 17 */
#define DCSR18          0x40000048  /* DMA Control / Status Register for Channel 18 */
#define DCSR19          0x4000004c  /* DMA Control / Status Register for Channel 19 */
#define DCSR20          0x40000050  /* DMA Control / Status Register for Channel 20 */
#define DCSR21          0x40000054  /* DMA Control / Status Register for Channel 21 */
#define DCSR22          0x40000058  /* DMA Control / Status Register for Channel 22 */
#define DCSR23          0x4000005c  /* DMA Control / Status Register for Channel 23 */
#define DCSR24          0x40000060  /* DMA Control / Status Register for Channel 24 */
#define DCSR25          0x40000064  /* DMA Control / Status Register for Channel 25 */
#define DCSR26          0x40000068  /* DMA Control / Status Register for Channel 26 */
#define DCSR27          0x4000006c  /* DMA Control / Status Register for Channel 27 */
#define DCSR28          0x40000070  /* DMA Control / Status Register for Channel 28 */
#define DCSR29          0x40000074  /* DMA Control / Status Register for Channel 29 */
#define DCSR30          0x40000078  /* DMA Control / Status Register for Channel 30 */
#define DCSR31          0x4000007c  /* DMA Control / Status Register for Channel 31 */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

#define DCSR(x)         (0x40000000 | ((x) << 2))

#define DCSR_RUN        (1 << 31)       /* Run Bit (read / write) */
#define DCSR_NODESC     (1 << 30)       /* No-Descriptor Fetch (read / write) */
#define DCSR_STOPIRQEN  (1 << 29)       /* Stop Interrupt Enable (read / write) */

#if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS)
#define DCSR_EORIRQEN   (1 << 28)       /* End of Receive Interrupt Enable (R/W) */
#define DCSR_EORJMPEN   (1 << 27)       /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN  (1 << 26)       /* STOP on an EOR */
#define DCSR_SETCMPST   (1 << 25)       /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST   (1 << 24)       /* Clear Descriptor Compare Status */
#define DCSR_CMPST      (1 << 10)       /* The Descriptor Compare Status */
#define DCSR_ENRINTR    (1 << 9)        /* The end of Receive */
#endif

#define DCSR_REQPEND    (1 << 8)        /* Request Pending (read-only) */
#define DCSR_STOPSTATE  (1 << 3)        /* Stop State (read-only) */
#define DCSR_ENDINTR    (1 << 2)        /* End Interrupt (read / write) */
#define DCSR_STARTINTR  (1 << 1)        /* Start Interrupt (read / write) */
#define DCSR_BUSERR     (1 << 0)        /* Bus Error Interrupt (read / write) */

#define DINT            0x400000f0  /* DMA Interrupt Register */

#define DRCMR0          0x40000100  /* Request to Channel Map Register for DREQ 0 */
#define DRCMR1          0x40000104  /* Request to Channel Map Register for DREQ 1 */
#define DRCMR2          0x40000108  /* Request to Channel Map Register for I2S receive Request */
#define DRCMR3          0x4000010c  /* Request to Channel Map Register for I2S transmit Request */
#define DRCMR4          0x40000110  /* Request to Channel Map Register for BTUART receive Request */
#define DRCMR5          0x40000114  /* Request to Channel Map Register for BTUART transmit Request. */
#define DRCMR6          0x40000118  /* Request to Channel Map Register for FFUART receive Request */
#define DRCMR7          0x4000011c  /* Request to Channel Map Register for FFUART transmit Request */
#define DRCMR8          0x40000120  /* Request to Channel Map Register for AC97 microphone Request */
#define DRCMR9          0x40000124  /* Request to Channel Map Register for AC97 modem receive Request */
#define DRCMR10         0x40000128  /* Request to Channel Map Register for AC97 modem transmit Request */
#define DRCMR11         0x4000012c  /* Request to Channel Map Register for AC97 audio receive Request */
#define DRCMR12         0x40000130  /* Request to Channel Map Register for AC97 audio transmit Request */
#define DRCMR13         0x40000134  /* Request to Channel Map Register for SSP receive Request */
#define DRCMR14         0x40000138  /* Request to Channel Map Register for SSP transmit Request */
#define DRCMR15         0x4000013c  /* Reserved */
#define DRCMR16         0x40000140  /* Reserved */
#define DRCMR17         0x40000144  /* Request to Channel Map Register for ICP receive Request */
#define DRCMR18         0x40000148  /* Request to Channel Map Register for ICP transmit Request */
#define DRCMR19         0x4000014c  /* Request to Channel Map Register for STUART receive Request */
#define DRCMR20         0x40000150  /* Request to Channel Map Register for STUART transmit Request */
#define DRCMR21         0x40000154  /* Request to Channel Map Register for MMC receive Request */
#define DRCMR22         0x40000158  /* Request to Channel Map Register for MMC transmit Request */
#define DRCMR23         0x4000015c  /* Reserved */
#define DRCMR24         0x40000160  /* Reserved */
#define DRCMR25         0x40000164  /* Request to Channel Map Register for USB endpoint 1 Request */
#define DRCMR26         0x40000168  /* Request to Channel Map Register for USB endpoint 2 Request */
#define DRCMR27         0x4000016C  /* Request to Channel Map Register for USB endpoint 3 Request */
#define DRCMR28         0x40000170  /* Request to Channel Map Register for USB endpoint 4 Request */
#define DRCMR29         0x40000174  /* Reserved */
#define DRCMR30         0x40000178  /* Request to Channel Map Register for USB endpoint 6 Request */
#define DRCMR31         0x4000017C  /* Request to Channel Map Register for USB endpoint 7 Request */
#define DRCMR32         0x40000180  /* Request to Channel Map Register for USB endpoint 8 Request */
#define DRCMR33         0x40000184  /* Request to Channel Map Register for USB endpoint 9 Request */
#define DRCMR34         0x40000188  /* Reserved */
#define DRCMR35         0x4000018C  /* Request to Channel Map Register for USB endpoint 11 Request */
#define DRCMR36         0x40000190  /* Request to Channel Map Register for USB endpoint 12 Request */
#define DRCMR37         0x40000194  /* Request to Channel Map Register for USB endpoint 13 Request */
#define DRCMR38         0x40000198  /* Request to Channel Map Register for USB endpoint 14 Request */
#define DRCMR39         0x4000019C  /* Reserved */

#define DRCMR68                0x40001110  /* Request to Channel Map Register for Camera FIFO 0 Request */
#define DRCMR69                0x40001114  /* Request to Channel Map Register for Camera FIFO 1 Request */
#define DRCMR70                0x40001118  /* Request to Channel Map Register for Camera FIFO 2 Request */

#define DRCMRRXSADR     DRCMR2
#define DRCMRTXSADR     DRCMR3
#define DRCMRRXBTRBR    DRCMR4
#define DRCMRTXBTTHR    DRCMR5
#define DRCMRRXFFRBR    DRCMR6
#define DRCMRTXFFTHR    DRCMR7
#define DRCMRRXMCDR     DRCMR8
#define DRCMRRXMODR     DRCMR9
#define DRCMRTXMODR     DRCMR10
#define DRCMRRXPCDR     DRCMR11
#define DRCMRTXPCDR     DRCMR12
#define DRCMRRXSSDR     DRCMR13
#define DRCMRTXSSDR     DRCMR14
#define DRCMRRXICDR     DRCMR17
#define DRCMRTXICDR     DRCMR18
#define DRCMRRXSTRBR    DRCMR19
#define DRCMRTXSTTHR    DRCMR20
#define DRCMRRXMMC      DRCMR21
#define DRCMRTXMMC      DRCMR22

#define DRCMR_MAPVLD    (1 << 7)        /* Map Valid (read / write) */
#define DRCMR_CHLNUM    0x0f            /* mask for Channel Number (read / write) */

#define DDADR0          0x40000200  /* DMA Descriptor Address Register Channel 0 */
#define DSADR0          0x40000204  /* DMA Source Address Register Channel 0 */
#define DTADR0          0x40000208  /* DMA Target Address Register Channel 0 */
#define DCMD0           0x4000020c  /* DMA Command Address Register Channel 0 */
#define DDADR1          0x40000210  /* DMA Descriptor Address Register Channel 1 */
#define DSADR1          0x40000214  /* DMA Source Address Register Channel 1 */
#define DTADR1          0x40000218  /* DMA Target Address Register Channel 1 */
#define DCMD1           0x4000021c  /* DMA Command Address Register Channel 1 */
#define DDADR2          0x40000220  /* DMA Descriptor Address Register Channel 2 */
#define DSADR2          0x40000224  /* DMA Source Address Register Channel 2 */
#define DTADR2          0x40000228  /* DMA Target Address Register Channel 2 */
#define DCMD2           0x4000022c  /* DMA Command Address Register Channel 2 */
#define DDADR3          0x40000230  /* DMA Descriptor Address Register Channel 3 */
#define DSADR3          0x40000234  /* DMA Source Address Register Channel 3 */
#define DTADR3          0x40000238  /* DMA Target Address Register Channel 3 */
#define DCMD3           0x4000023c  /* DMA Command Address Register Channel 3 */
#define DDADR4          0x40000240  /* DMA Descriptor Address Register Channel 4 */
#define DSADR4          0x40000244  /* DMA Source Address Register Channel 4 */
#define DTADR4          0x40000248  /* DMA Target Address Register Channel 4 */
#define DCMD4           0x4000024c  /* DMA Command Address Register Channel 4 */
#define DDADR5          0x40000250  /* DMA Descriptor Address Register Channel 5 */
#define DSADR5          0x40000254  /* DMA Source Address Register Channel 5 */
#define DTADR5          0x40000258  /* DMA Target Address Register Channel 5 */
#define DCMD5           0x4000025c  /* DMA Command Address Register Channel 5 */
#define DDADR6          0x40000260  /* DMA Descriptor Address Register Channel 6 */
#define DSADR6          0x40000264  /* DMA Source Address Register Channel 6 */
#define DTADR6          0x40000268  /* DMA Target Address Register Channel 6 */
#define DCMD6           0x4000026c  /* DMA Command Address Register Channel 6 */
#define DDADR7          0x40000270  /* DMA Descriptor Address Register Channel 7 */
#define DSADR7          0x40000274  /* DMA Source Address Register Channel 7 */
#define DTADR7          0x40000278  /* DMA Target Address Register Channel 7 */
#define DCMD7           0x4000027c  /* DMA Command Address Register Channel 7 */
#define DDADR8          0x40000280  /* DMA Descriptor Address Register Channel 8 */
#define DSADR8          0x40000284  /* DMA Source Address Register Channel 8 */
#define DTADR8          0x40000288  /* DMA Target Address Register Channel 8 */
#define DCMD8           0x4000028c  /* DMA Command Address Register Channel 8 */
#define DDADR9          0x40000290  /* DMA Descriptor Address Register Channel 9 */
#define DSADR9          0x40000294  /* DMA Source Address Register Channel 9 */
#define DTADR9          0x40000298  /* DMA Target Address Register Channel 9 */
#define DCMD9           0x4000029c  /* DMA Command Address Register Channel 9 */
#define DDADR10         0x400002a0  /* DMA Descriptor Address Register Channel 10 */
#define DSADR10         0x400002a4  /* DMA Source Address Register Channel 10 */
#define DTADR10         0x400002a8  /* DMA Target Address Register Channel 10 */
#define DCMD10          0x400002ac  /* DMA Command Address Register Channel 10 */
#define DDADR11         0x400002b0  /* DMA Descriptor Address Register Channel 11 */
#define DSADR11         0x400002b4  /* DMA Source Address Register Channel 11 */
#define DTADR11         0x400002b8  /* DMA Target Address Register Channel 11 */
#define DCMD11          0x400002bc  /* DMA Command Address Register Channel 11 */
#define DDADR12         0x400002c0  /* DMA Descriptor Address Register Channel 12 */
#define DSADR12         0x400002c4  /* DMA Source Address Register Channel 12 */
#define DTADR12         0x400002c8  /* DMA Target Address Register Channel 12 */
#define DCMD12          0x400002cc  /* DMA Command Address Register Channel 12 */
#define DDADR13         0x400002d0  /* DMA Descriptor Address Register Channel 13 */
#define DSADR13         0x400002d4  /* DMA Source Address Register Channel 13 */
#define DTADR13         0x400002d8  /* DMA Target Address Register Channel 13 */
#define DCMD13          0x400002dc  /* DMA Command Address Register Channel 13 */
#define DDADR14         0x400002e0  /* DMA Descriptor Address Register Channel 14 */
#define DSADR14         0x400002e4  /* DMA Source Address Register Channel 14 */
#define DTADR14         0x400002e8  /* DMA Target Address Register Channel 14 */
#define DCMD14          0x400002ec  /* DMA Command Address Register Channel 14 */
#define DDADR15         0x400002f0  /* DMA Descriptor Address Register Channel 15 */
#define DSADR15         0x400002f4  /* DMA Source Address Register Channel 15 */
#define DTADR15         0x400002f8  /* DMA Target Address Register Channel 15 */
#define DCMD15          0x400002fc  /* DMA Command Address Register Channel 15 */

#define DDADR(x)        (0x40000200 | ((x) << 4))
#define DSADR(x)        (0x40000204 | ((x) << 4))
#define DTADR(x)        (0x40000208 | ((x) << 4))
#define DCMD(x)         (0x4000020c | ((x) << 4))

#define DDADR_DESCADDR  0xfffffff0      /* Address of next descriptor (mask) */
#define DDADR_STOP      (1 << 0)        /* Stop (read / write) */

#define DCMD_INCSRCADDR (1 << 31)       /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30)       /* Target Address Increment Setting. */
#define DCMD_FLOWSRC    (1 << 29)       /* Flow Control by the source. */
#define DCMD_FLOWTRG    (1 << 28)       /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22)       /* Start Interrupt Enable */
#define DCMD_ENDIRQEN   (1 << 21)       /* End Interrupt Enable */
#define DCMD_ENDIAN     (1 << 18)       /* Device Endian-ness. */
#define DCMD_BURST8     (1 << 16)       /* 8 byte burst */
#define DCMD_BURST16    (2 << 16)       /* 16 byte burst */
#define DCMD_BURST32    (3 << 16)       /* 32 byte burst */
#define DCMD_WIDTH1     (1 << 14)       /* 1 byte width */
#define DCMD_WIDTH2     (2 << 14)       /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4     (3 << 14)       /* 4 byte width (Word) */
#define DCMD_LENGTH     0x01fff         /* length mask (max = 8K - 1) */

/* default combinations */
#define DCMD_RXPCDR     (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_RXMCDR     (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4)
#define DCMD_TXPCDR     (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4)

/******************************************************************************/
/*
 * UARTs
 */
/* Full Function UART (FFUART) */
#define FFUART          FFRBR
#define FFRBR           0x40100000  /* Receive Buffer Register (read only) */
#define FFTHR           0x40100000  /* Transmit Holding Register (write only) */
#define FFIER           0x40100004  /* Interrupt Enable Register (read/write) */
#define FFIIR           0x40100008  /* Interrupt ID Register (read only) */
#define FFFCR           0x40100008  /* FIFO Control Register (write only) */
#define FFLCR           0x4010000C  /* Line Control Register (read/write) */
#define FFMCR           0x40100010  /* Modem Control Register (read/write) */
#define FFLSR           0x40100014  /* Line Status Register (read only) */
#define FFMSR           0x40100018  /* Modem Status Register (read only) */
#define FFSPR           0x4010001C  /* Scratch Pad Register (read/write) */
#define FFISR           0x40100020  /* Infrared Selection Register (read/write) */
#define FFDLL           0x40100000  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define FFDLH           0x40100004  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Bluetooth UART (BTUART) */
#define BTUART          BTRBR
#define BTRBR           0x40200000  /* Receive Buffer Register (read only) */
#define BTTHR           0x40200000  /* Transmit Holding Register (write only) */
#define BTIER           0x40200004  /* Interrupt Enable Register (read/write) */
#define BTIIR           0x40200008  /* Interrupt ID Register (read only) */
#define BTFCR           0x40200008  /* FIFO Control Register (write only) */
#define BTLCR           0x4020000C  /* Line Control Register (read/write) */
#define BTMCR           0x40200010  /* Modem Control Register (read/write) */
#define BTLSR           0x40200014  /* Line Status Register (read only) */
#define BTMSR           0x40200018  /* Modem Status Register (read only) */
#define BTSPR           0x4020001C  /* Scratch Pad Register (read/write) */
#define BTISR           0x40200020  /* Infrared Selection Register (read/write) */
#define BTDLL           0x40200000  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define BTDLH           0x40200004  /* Divisor Latch High Register (DLAB = 1) (read/write) */

/* Standard UART (STUART) */
#define STUART          STRBR
#define STRBR           0x40700000  /* Receive Buffer Register (read only) */
#define STTHR           0x40700000  /* Transmit Holding Register (write only) */
#define STIER           0x40700004  /* Interrupt Enable Register (read/write) */
#define STIIR           0x40700008  /* Interrupt ID Register (read only) */
#define STFCR           0x40700008  /* FIFO Control Register (write only) */
#define STLCR           0x4070000C  /* Line Control Register (read/write) */
#define STMCR           0x40700010  /* Modem Control Register (read/write) */
#define STLSR           0x40700014  /* Line Status Register (read only) */
#define STMSR           0x40700018  /* Reserved */
#define STSPR           0x4070001C  /* Scratch Pad Register (read/write) */
#define STISR           0x40700020  /* Infrared Selection Register (read/write) */
#define STDLL           0x40700000  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
#define STDLH           0x40700004  /* Divisor Latch High Register (DLAB = 1) (read/write) */

#define IER_DMAE        (1 << 7)        /* DMA Requests Enable */
#define IER_UUE         (1 << 6)        /* UART Unit Enable */
#define IER_NRZE        (1 << 5)        /* NRZ coding Enable */
#define IER_RTIOE       (1 << 4)        /* Receiver Time Out Interrupt Enable */
#define IER_MIE         (1 << 3)        /* Modem Interrupt Enable */
#define IER_RLSE        (1 << 2)        /* Receiver Line Status Interrupt Enable */
#define IER_TIE         (1 << 1)        /* Transmit Data request Interrupt Enable */
#define IER_RAVIE       (1 << 0)        /* Receiver Data Available Interrupt Enable */

#define IIR_FIFOES1     (1 << 7)        /* FIFO Mode Enable Status */
#define IIR_FIFOES0     (1 << 6)        /* FIFO Mode Enable Status */
#define IIR_TOD         (1 << 3)        /* Time Out Detected */
#define IIR_IID2        (1 << 2)        /* Interrupt Source Encoded */
#define IIR_IID1        (1 << 1)        /* Interrupt Source Encoded */
#define IIR_IP          (1 << 0)        /* Interrupt Pending (active low) */

#define FCR_ITL2        (1 << 7)        /* Interrupt Trigger Level */
#define FCR_ITL1        (1 << 6)        /* Interrupt Trigger Level */
#define FCR_RESETTF     (1 << 2)        /* Reset Transmitter FIFO */
#define FCR_RESETRF     (1 << 1)        /* Reset Receiver FIFO */
#define FCR_TRFIFOE     (1 << 0)        /* Transmit and Receive FIFO Enable */
#define FCR_ITL_1       (0)
#define FCR_ITL_8       (FCR_ITL1)
#define FCR_ITL_16      (FCR_ITL2)
#define FCR_ITL_32      (FCR_ITL2|FCR_ITL1)

#define LCR_DLAB        (1 << 7)        /* Divisor Latch Access Bit */
#define LCR_SB          (1 << 6)        /* Set Break */
#define LCR_STKYP       (1 << 5)        /* Sticky Parity */
#define LCR_EPS         (1 << 4)        /* Even Parity Select */
#define LCR_PEN         (1 << 3)        /* Parity Enable */
#define LCR_STB         (1 << 2)        /* Stop Bit */
#define LCR_WLS1        (1 << 1)        /* Word Length Select */
#define LCR_WLS0        (1 << 0)        /* Word Length Select */

#define LSR_FIFOE       (1 << 7)        /* FIFO Error Status */
#define LSR_TEMT        (1 << 6)        /* Transmitter Empty */
#define LSR_TDRQ        (1 << 5)        /* Transmit Data Request */
#define LSR_BI          (1 << 4)        /* Break Interrupt */
#define LSR_FE          (1 << 3)        /* Framing Error */
#define LSR_PE          (1 << 2)        /* Parity Error */
#define LSR_OE          (1 << 1)        /* Overrun Error */
#define LSR_DR          (1 << 0)        /* Data Ready */

#define MCR_LOOP        (1 << 4)        /* */
#define MCR_OUT2        (1 << 3)        /* force MSR_DCD in loopback mode */
#define MCR_OUT1        (1 << 2)        /* force MSR_RI in loopback mode */
#define MCR_RTS         (1 << 1)        /* Request to Send */
#define MCR_DTR         (1 << 0)        /* Data Terminal Ready */

#define MSR_DCD         (1 << 7)        /* Data Carrier Detect */
#define MSR_RI          (1 << 6)        /* Ring Indicator */
#define MSR_DSR         (1 << 5)        /* Data Set Ready */
#define MSR_CTS         (1 << 4)        /* Clear To Send */
#define MSR_DDCD        (1 << 3)        /* Delta Data Carrier Detect */
#define MSR_TERI        (1 << 2)        /* Trailing Edge Ring Indicator */
#define MSR_DDSR        (1 << 1)        /* Delta Data Set Ready */
#define MSR_DCTS        (1 << 0)        /* Delta Clear To Send */

/******************************************************************************/
/*
 * IrSR (Infrared Selection Register)
 */
#define IrSR_OFFSET 0x20

#define IrSR_RXPL_NEG_IS_ZERO (1<<4)
#define IrSR_RXPL_POS_IS_ZERO 0x0
#define IrSR_TXPL_NEG_IS_ZERO (1<<3)
#define IrSR_TXPL_POS_IS_ZERO 0x0
#define IrSR_XMODE_PULSE_1_6  (1<<2)
#define IrSR_XMODE_PULSE_3_16 0x0
#define IrSR_RCVEIR_IR_MODE   (1<<1)
#define IrSR_RCVEIR_UART_MODE 0x0
#define IrSR_XMITIR_IR_MODE   (1<<0)
#define IrSR_XMITIR_UART_MODE 0x0

#define IrSR_IR_RECEIVE_ON (\
                IrSR_RXPL_NEG_IS_ZERO | \
                IrSR_TXPL_POS_IS_ZERO | \
                IrSR_XMODE_PULSE_3_16 | \
                IrSR_RCVEIR_IR_MODE   | \
                IrSR_XMITIR_UART_MODE)

#define IrSR_IR_TRANSMIT_ON (\
                IrSR_RXPL_NEG_IS_ZERO | \
                IrSR_TXPL_POS_IS_ZERO | \
                IrSR_XMODE_PULSE_3_16 | \
                IrSR_RCVEIR_UART_MODE | \
                IrSR_XMITIR_IR_MODE)

/*
 * I2C registers
 */
#define IBMR            0x40301680  /* I2C Bus Monitor Register - IBMR */
#define IDBR            0x40301688  /* I2C Data Buffer Register - IDBR */
#define ICR             0x40301690  /* I2C Control Register - ICR */
#define ISR             0x40301698  /* I2C Status Register - ISR */
#define ISAR            0x403016A0  /* I2C Slave Address Register - ISAR */

#ifdef CONFIG_CPU_MONAHANS
#define PWRIBMR         0x40f500C0  /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR         0x40f500C4  /* Power I2C Data Buffer Register-IDBR */
#define PWRICR          0x40f500C8  /* Power I2C Control Register - ICR */
#define PWRISR          0x40f500CC  /* Power I2C Status Register - ISR */
#define PWRISAR         0x40f500D0  /* Power I2C Slave Address Register-ISAR */
#else
#define PWRIBMR         0x40f00180  /* Power I2C Bus Monitor Register-IBMR */
#define PWRIDBR         0x40f00188  /* Power I2C Data Buffer Register-IDBR */
#define PWRICR          0x40f00190  /* Power I2C Control Register - ICR */
#define PWRISR          0x40f00198  /* Power I2C Status Register - ISR */
#define PWRISAR         0x40f001A0  /* Power I2C Slave Address Register-ISAR */
#endif

/* ----- Control register bits ---------------------------------------- */

#define ICR_START       0x1             /* start bit */
#define ICR_STOP        0x2             /* stop bit */
#define ICR_ACKNAK      0x4             /* send ACK(0) or NAK(1) */
#define ICR_TB          0x8             /* transfer byte bit */
#define ICR_MA          0x10            /* master abort */
#define ICR_SCLE        0x20            /* master clock enable, mona SCLEA */
#define ICR_IUE         0x40            /* unit enable */
#define ICR_GCD         0x80            /* general call disable */
#define ICR_ITEIE       0x100           /* enable tx interrupts */
#define ICR_IRFIE       0x200           /* enable rx interrupts, mona: DRFIE */
#define ICR_BEIE        0x400           /* enable bus error ints */
#define ICR_SSDIE       0x800           /* slave STOP detected int enable */
#define ICR_ALDIE       0x1000          /* enable arbitration interrupt */
#define ICR_SADIE       0x2000          /* slave address detected int enable */
#define ICR_UR          0x4000          /* unit reset */
#define ICR_FM          0x8000          /* Fast Mode */

/* ----- Status register bits ----------------------------------------- */

#define ISR_RWM         0x1             /* read/write mode */
#define ISR_ACKNAK      0x2             /* ack/nak status */
#define ISR_UB          0x4             /* unit busy */
#define ISR_IBB         0x8             /* bus busy */
#define ISR_SSD         0x10            /* slave stop detected */
#define ISR_ALD         0x20            /* arbitration loss detected */
#define ISR_ITE         0x40            /* tx buffer empty */
#define ISR_IRF         0x80            /* rx buffer full */
#define ISR_GCAD        0x100           /* general call address detected */
#define ISR_SAD         0x200           /* slave address detected */
#define ISR_BED         0x400           /* bus error no ACK/NAK */

/*
 * Serial Audio Controller
 */
/* FIXME the audio defines collide w/ the SA1111 defines.  I don't like these
 * short defines because there is too much chance of namespace collision
 */
#define SACR0           0x40400000  /*  Global Control Register */
#define SACR1           0x40400004  /*  Serial Audio I 2 S/MSB-Justified Control Register */
#define SASR0           0x4040000C  /*  Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
#define SAIMR           0x40400014  /*  Serial Audio Interrupt Mask Register */
#define SAICR           0x40400018  /*  Serial Audio Interrupt Clear Register */
#define SADIV           0x40400060  /*  Audio Clock Divider Register. */
#define SADR            0x40400080  /*  Serial Audio Data Register (TX and RX FIFO access Register). */

/*
 * AC97 Controller registers
 */
#define POCR            0x40500000  /* PCM Out Control Register */
#define POCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define PICR            0x40500004  /* PCM In Control Register */
#define PICR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define MCCR            0x40500008  /* Mic In Control Register */
#define MCCR_FEIE       (1 << 3)        /* FIFO Error Interrupt Enable */

#define GCR             0x4050000C  /* Global Control Register */
#define GCR_CDONE_IE    (1 << 19)       /* Command Done Interrupt Enable */
#define GCR_SDONE_IE    (1 << 18)       /* Status Done Interrupt Enable */
#define GCR_SECRDY_IEN  (1 << 9)        /* Secondary Ready Interrupt Enable */
#define GCR_PRIRDY_IEN  (1 << 8)        /* Primary Ready Interrupt Enable */
#define GCR_SECRES_IEN  (1 << 5)        /* Secondary Resume Interrupt Enable */
#define GCR_PRIRES_IEN  (1 << 4)        /* Primary Resume Interrupt Enable */
#define GCR_ACLINK_OFF  (1 << 3)        /* AC-link Shut Off */
#define GCR_WARM_RST    (1 << 2)        /* AC97 Warm Reset */
#define GCR_COLD_RST    (1 << 1)        /* AC'97 Cold Reset (0 = active) */
#define GCR_GIE         (1 << 0)        /* Codec GPI Interrupt Enable */

#define POSR            0x40500010  /* PCM Out Status Register */
#define POSR_FIFOE      (1 << 4)        /* FIFO error */

#define PISR            0x40500014  /* PCM In Status Register */
#define PISR_FIFOE      (1 << 4)        /* FIFO error */

#define MCSR            0x40500018  /* Mic In Status Register */
#define MCSR_FIFOE      (1 << 4)        /* FIFO error */

#define GSR             0x4050001C  /* Global Status Register */
#define GSR_CDONE       (1 << 19)       /* Command Done */
#define GSR_SDONE       (1 << 18)       /* Status Done */
#define GSR_RDCS        (1 << 15)       /* Read Completion Status */
#define GSR_BIT3SLT12   (1 << 14)       /* Bit 3 of slot 12 */
#define GSR_BIT2SLT12   (1 << 13)       /* Bit 2 of slot 12 */
#define GSR_BIT1SLT12   (1 << 12)       /* Bit 1 of slot 12 */
#define GSR_SECRES      (1 << 11)       /* Secondary Resume Interrupt */
#define GSR_PRIRES      (1 << 10)       /* Primary Resume Interrupt */
#define GSR_SCR         (1 << 9)        /* Secondary Codec Ready */
#define GSR_PCR         (1 << 8)        /*  Primary Codec Ready */
#define GSR_MINT        (1 << 7)        /* Mic In Interrupt */
#define GSR_POINT       (1 << 6)        /* PCM Out Interrupt */
#define GSR_PIINT       (1 << 5)        /* PCM In Interrupt */
#define GSR_MOINT       (1 << 2)        /* Modem Out Interrupt */
#define GSR_MIINT       (1 << 1)        /* Modem In Interrupt */
#define GSR_GSCI        (1 << 0)        /* Codec GPI Status Change Interrupt */

#define CAR             0x40500020  /* CODEC Access Register */
#define CAR_CAIP        (1 << 0)        /* Codec Access In Progress */

#define PCDR            0x40500040  /* PCM FIFO Data Register */
#define MCDR            0x40500060  /* Mic-in FIFO Data Register */

#define MOCR            0x40500100  /* Modem Out Control Register */
#define MOCR_FEIE       (1 << 3)        /* FIFO Error */

#define MICR            0x40500108  /* Modem In Control Register */
#define MICR_FEIE       (1 << 3)        /* FIFO Error */

#define MOSR            0x40500110  /* Modem Out Status Register */
#define MOSR_FIFOE      (1 << 4)        /* FIFO error */

#define MISR            0x40500118  /* Modem In Status Register */
#define MISR_FIFOE      (1 << 4)        /* FIFO error */

#define MODR            0x40500140  /* Modem FIFO Data Register */

#define PAC_REG_BASE    0x40500200  /* Primary Audio Codec */
#define SAC_REG_BASE    0x40500300  /* Secondary Audio Codec */
#define PMC_REG_BASE    0x40500400  /* Primary Modem Codec */
#define SMC_REG_BASE    0x40500500  /* Secondary Modem Codec */


/*
 * USB Device Controller
 */
#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)

#define UDCCR           0x40600000      /* UDC Control Register */
#define UDCCR_UDE       (1 << 0)                /* UDC enable */
#define UDCCR_UDA       (1 << 1)                /* UDC active */
#define UDCCR_RSM       (1 << 2)                /* Device resume */
#define UDCCR_EMCE      (1 << 3)                /* Endpoint Memory Configuration Error */
#define UDCCR_SMAC      (1 << 4)                /* Switch Endpoint Memory to Active Configuration */
#define UDCCR_RESIR     (1 << 29)               /* Resume interrupt request */
#define UDCCR_SUSIR     (1 << 28)               /* Suspend interrupt request */
#define UDCCR_SM        (1 << 28)               /* Suspend interrupt mask */
#define UDCCR_RSTIR     (1 << 27)               /* Reset interrupt request */
#define UDCCR_REM       (1 << 27)               /* Reset interrupt mask */
#define UDCCR_RM        (1 << 29)               /* resume interrupt mask */
#define UDCCR_SRM       (UDCCR_SM|UDCCR_RM)
#define UDCCR_OEN       (1 << 31)               /* On-the-Go Enable */
#define UDCCR_AALTHNP   (1 << 30)               /* A-device Alternate Host Negotiation Protocol Port Support */
#define UDCCR_AHNP      (1 << 29)               /* A-device Host Negotiation Protocol Support */
#define UDCCR_BHNP      (1 << 28)               /* B-device Host Negotiation Protocol Enable */
#define UDCCR_DWRE      (1 << 16)               /* Device Remote Wake-up Enable */
#define UDCCR_ACN       (0x03 << 11)            /* Active UDC configuration Number */
#define UDCCR_ACN_S     11
#define UDCCR_AIN       (0x07 << 8)             /* Active UDC interface Number */
#define UDCCR_AIN_S     8
#define UDCCR_AAISN     (0x07 << 5)             /* Active UDC Alternate Interface  Setting Number */
#define UDCCR_AAISN_S   5

#define UDCCS0          0x40600100      /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR      (1 << 0)                /* OUT packet ready */
#define UDCCS0_IPR      (1 << 1)                /* IN packet ready */
#define UDCCS0_FTF      (1 << 2)                /* Flush Tx FIFO */
#define UDCCS0_DRWF     (1 << 16)               /* Device remote wakeup feature */
#define UDCCS0_SST      (1 << 4)                /* Sent stall */
#define UDCCS0_FST      (1 << 5)                /* Force stall */
#define UDCCS0_RNE      (1 << 6)                /* Receive FIFO no empty */
#define UDCCS0_SA       (1 << 7)                /* Setup active */

/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1          0x40600104  /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6          0x40600028  /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11         0x4060003C  /* UDC Endpoint 11 (IN) Control/Status Register */

#define UDCCS_BI_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_BI_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_BI_FTF    (1 << 8)        /* Flush Tx FIFO */
#define UDCCS_BI_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_BI_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BI_FST    (1 << 5)        /* Force stall */
#define UDCCS_BI_TSP    (1 << 7)        /* Transmit short packet */

/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2          0x40600108  /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7          0x4060002C  /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12         0x40600040  /* UDC Endpoint 12 (OUT) Control/Status Register */

#define UDCCS_BO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_BO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_BO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_BO_SST    (1 << 4)        /* Sent stall */
#define UDCCS_BO_FST    (1 << 5)        /* Force stall */
#define UDCCS_BO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_BO_RSP    (1 << 7)        /* Receive short packet */

/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3          0x4060001C  /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8          0x40600030  /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13         0x40600044  /* UDC Endpoint 13 (IN) Control/Status Register */

#define UDCCS_II_TFS    (1 << 0)        /* Transmit FIFO service */
#define UDCCS_II_TPC    (1 << 1)        /* Transmit packet complete */
#define UDCCS_II_FTF    (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_II_TUR    (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_II_TSP    (1 << 7)        /* Transmit short packet */

/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4          0x40600020  /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9          0x40600034  /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14         0x40600048  /* UDC Endpoint 14 (OUT) Control/Status Register */

#define UDCCS_IO_RFS    (1 << 0)        /* Receive FIFO service */
#define UDCCS_IO_RPC    (1 << 1)        /* Receive packet complete */
#define UDCCS_IO_ROF    (1 << 3)        /* Receive overflow */
#define UDCCS_IO_DME    (1 << 3)        /* DMA enable */
#define UDCCS_IO_RNE    (1 << 6)        /* Receive FIFO not empty */
#define UDCCS_IO_RSP    (1 << 7)        /* Receive short packet */

/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5          0x40600024  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10         0x40600038  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15         0x4060004C  /* UDC Endpoint 15 (Interrupt) Control/Status Register */

#define UDCCS_INT_TFS   (1 << 0)        /* Transmit FIFO service */
#define UDCCS_INT_TPC   (1 << 1)        /* Transmit packet complete */
#define UDCCS_INT_FTF   (1 << 2)        /* Flush Tx FIFO */
#define UDCCS_INT_TUR   (1 << 3)        /* Transmit FIFO underrun */
#define UDCCS_INT_SST   (1 << 4)        /* Sent stall */
#define UDCCS_INT_FST   (1 << 5)        /* Force stall */
#define UDCCS_INT_TSP   (1 << 7)        /* Transmit short packet */

#define UFNRH           0x40600060  /* UDC Frame Number Register High */
#define UFNRL           0x40600014  /* UDC Frame Number Register Low */
#define UBCR2           0x40600208  /* UDC Byte Count Reg 2 */
#define UBCR4           0x4060006c  /* UDC Byte Count Reg 4 */
#define UBCR7           0x40600070  /* UDC Byte Count Reg 7 */
#define UBCR9           0x40600074  /* UDC Byte Count Reg 9 */
#define UBCR12          0x40600078  /* UDC Byte Count Reg 12 */
#define UBCR14          0x4060007c  /* UDC Byte Count Reg 14 */
#define UDDR0           0x40600300  /* UDC Endpoint 0 Data Register */
#define UDDR1           0x40600304  /* UDC Endpoint 1 Data Register */
#define UDDR2           0x40600308  /* UDC Endpoint 2 Data Register */
#define UDDR3           0x40600200  /* UDC Endpoint 3 Data Register */
#define UDDR4           0x40600400  /* UDC Endpoint 4 Data Register */
#define UDDR5           0x406000A0  /* UDC Endpoint 5 Data Register */
#define UDDR6           0x40600600  /* UDC Endpoint 6 Data Register */
#define UDDR7           0x40600680  /* UDC Endpoint 7 Data Register */
#define UDDR8           0x40600700  /* UDC Endpoint 8 Data Register */
#define UDDR9           0x40600900  /* UDC Endpoint 9 Data Register */
#define UDDR10          0x406000C0  /* UDC Endpoint 10 Data Register */
#define UDDR11          0x40600B00  /* UDC Endpoint 11 Data Register */
#define UDDR12          0x40600B80  /* UDC Endpoint 12 Data Register */
#define UDDR13          0x40600C00  /* UDC Endpoint 13 Data Register */
#define UDDR14          0x40600E00  /* UDC Endpoint 14 Data Register */
#define UDDR15          0x406000E0  /* UDC Endpoint 15 Data Register */

#define UICR0           0x40600004  /* UDC Interrupt Control Register 0 */

#define UICR0_IM0       (1 << 0)        /* Interrupt mask ep 0 */
#define UICR0_IM1       (1 << 1)        /* Interrupt mask ep 1 */
#define UICR0_IM2       (1 << 2)        /* Interrupt mask ep 2 */
#define UICR0_IM3       (1 << 3)        /* Interrupt mask ep 3 */
#define UICR0_IM4       (1 << 4)        /* Interrupt mask ep 4 */
#define UICR0_IM5       (1 << 5)        /* Interrupt mask ep 5 */
#define UICR0_IM6       (1 << 6)        /* Interrupt mask ep 6 */
#define UICR0_IM7       (1 << 7)        /* Interrupt mask ep 7 */

#define UICR1           0x40600008  /* UDC Interrupt Control Register 1 */

#define UICR1_IM8       (1 << 0)        /* Interrupt mask ep 8 */
#define UICR1_IM9       (1 << 1)        /* Interrupt mask ep 9 */
#define UICR1_IM10      (1 << 2)        /* Interrupt mask ep 10 */
#define UICR1_IM11      (1 << 3)        /* Interrupt mask ep 11 */
#define UICR1_IM12      (1 << 4)        /* Interrupt mask ep 12 */
#define UICR1_IM13      (1 << 5)        /* Interrupt mask ep 13 */
#define UICR1_IM14      (1 << 6)        /* Interrupt mask ep 14 */
#define UICR1_IM15      (1 << 7)        /* Interrupt mask ep 15 */

#define USIR0           0x4060000C  /* UDC Status Interrupt Register 0 */

#define USIR0_IR0       (1 << 0)        /* Interrup request ep 0 */
#define USIR0_IR1       (1 << 2)        /* Interrup request ep 1 */
#define USIR0_IR2       (1 << 4)        /* Interrup request ep 2 */
#define USIR0_IR3       (1 << 3)        /* Interrup request ep 3 */
#define USIR0_IR4       (1 << 4)        /* Interrup request ep 4 */
#define USIR0_IR5       (1 << 5)        /* Interrup request ep 5 */
#define USIR0_IR6       (1 << 6)        /* Interrup request ep 6 */
#define USIR0_IR7       (1 << 7)        /* Interrup request ep 7 */

#define USIR1           0x40600010  /* UDC Status Interrupt Register 1 */

#define USIR1_IR8       (1 << 0)        /* Interrup request ep 8 */
#define USIR1_IR9       (1 << 1)        /* Interrup request ep 9 */
#define USIR1_IR10      (1 << 2)        /* Interrup request ep 10 */
#define USIR1_IR11      (1 << 3)        /* Interrup request ep 11 */
#define USIR1_IR12      (1 << 4)        /* Interrup request ep 12 */
#define USIR1_IR13      (1 << 5)        /* Interrup request ep 13 */
#define USIR1_IR14      (1 << 6)        /* Interrup request ep 14 */
#define USIR1_IR15      (1 << 7)        /* Interrup request ep 15 */


#define UDCICR0         0x40600004      /* UDC Interrupt Control Register0 */
#define UDCICR1         0x40600008      /* UDC Interrupt Control Register1 */
#define UDCICR_FIFOERR  (1 << 1)                        /* FIFO Error interrupt for EP */
#define UDCICR_PKTCOMPL (1 << 0)                        /* Packet Complete interrupt for EP */

#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCICR1_IECC    (1 << 31)       /* IntEn - Configuration Change */
#define UDCICR1_IESOF   (1 << 30)       /* IntEn - Start of Frame */
#define UDCICR1_IERU    (1 << 29)       /* IntEn - Resume */
#define UDCICR1_IESU    (1 << 28)       /* IntEn - Suspend */
#define UDCICR1_IERS    (1 << 27)       /* IntEn - Reset */

#define UDCISR0         0x4060000C /* UDC Interrupt Status Register 0 */
#define UDCISR1         0x40600010 /* UDC Interrupt Status Register 1 */
#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
#define UDCISR1_IRCC    (1 << 31)       /* IntEn - Configuration Change */
#define UDCISR1_IRSOF   (1 << 30)       /* IntEn - Start of Frame */
#define UDCISR1_IRRU    (1 << 29)       /* IntEn - Resume */
#define UDCISR1_IRSU    (1 << 28)       /* IntEn - Suspend */
#define UDCISR1_IRRS    (1 << 27)       /* IntEn - Reset */


#define UDCFNR                  0x40600014 /* UDC Frame Number Register */
#define UDCOTGICR               0x40600018 /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF          (1 << 24)       /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR          (1 << 17)       /* Extra Transciever Interrupt Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF          (1 << 16)       /* Extra Transciever Interrupt Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R       (1 << 9)        /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */
#define UDCOTGICR_IEVV40F       (1 << 8)        /* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV44R       (1 << 7)        /* OTG Vbus Valid 4.4V Rising Edge  Interrupt Enable */
#define UDCOTGICR_IEVV44F       (1 << 6)        /* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */
#define UDCOTGICR_IESVR         (1 << 5)        /* OTG Session Valid Rising Edge Interrupt Enable */
#define UDCOTGICR_IESVF         (1 << 4)        /* OTG Session Valid Falling Edge Interrupt Enable */
#define UDCOTGICR_IESDR         (1 << 3)        /* OTG A-Device SRP Detect Rising Edge Interrupt Enable */
#define UDCOTGICR_IESDF         (1 << 2)        /* OTG A-Device SRP Detect Falling  Edge Interrupt Enable */
#define UDCOTGICR_IEIDR         (1 << 1)        /* OTG ID Change Rising Edge Interrupt Enable */
#define UDCOTGICR_IEIDF         (1 << 0)        /* OTG ID Change Falling Edge Interrupt Enable */

#define UDCCSN(x)       __REG2(0x40600100, (x) << 2)
#define UDCCSR0         0x40600100 /* UDC Control/Status register - Endpoint 0 */

#define UDCCSR0_SA      (1 << 7)        /* Setup Active */
#define UDCCSR0_RNE     (1 << 6)        /* Receive FIFO Not Empty */
#define UDCCSR0_FST     (1 << 5)        /* Force Stall */
#define UDCCSR0_SST     (1 << 4)        /* Sent Stall */
#define UDCCSR0_DME     (1 << 3)        /* DMA Enable */
#define UDCCSR0_FTF     (1 << 2)        /* Flush Transmit FIFO */
#define UDCCSR0_IPR     (1 << 1)        /* IN Packet Ready */
#define UDCCSR0_OPC     (1 << 0)        /* OUT Packet Complete */

#define UDCCSRA         0x40600104 /* UDC Control/Status register - Endpoint A */
#define UDCCSRB         0x40600108 /* UDC Control/Status register - Endpoint B */
#define UDCCSRC         0x4060010C /* UDC Control/Status register - Endpoint C */
#define UDCCSRD         0x40600110 /* UDC Control/Status register - Endpoint D */
#define UDCCSRE         0x40600114 /* UDC Control/Status register - Endpoint E */
#define UDCCSRF         0x40600118 /* UDC Control/Status register - Endpoint F */
#define UDCCSRG         0x4060011C /* UDC Control/Status register - Endpoint G */
#define UDCCSRH         0x40600120 /* UDC Control/Status register - Endpoint H */
#define UDCCSRI         0x40600124 /* UDC Control/Status register - Endpoint I */
#define UDCCSRJ         0x40600128 /* UDC Control/Status register - Endpoint J */
#define UDCCSRK         0x4060012C /* UDC Control/Status register - Endpoint K */
#define UDCCSRL         0x40600130 /* UDC Control/Status register - Endpoint L */
#define UDCCSRM         0x40600134 /* UDC Control/Status register - Endpoint M */
#define UDCCSRN         0x40600138 /* UDC Control/Status register - Endpoint N */
#define UDCCSRP         0x4060013C /* UDC Control/Status register - Endpoint P */
#define UDCCSRQ         0x40600140 /* UDC Control/Status register - Endpoint Q */
#define UDCCSRR         0x40600144 /* UDC Control/Status register - Endpoint R */
#define UDCCSRS         0x40600148 /* UDC Control/Status register - Endpoint S */
#define UDCCSRT         0x4060014C /* UDC Control/Status register - Endpoint T */
#define UDCCSRU         0x40600150 /* UDC Control/Status register - Endpoint U */
#define UDCCSRV         0x40600154 /* UDC Control/Status register - Endpoint V */
#define UDCCSRW         0x40600158 /* UDC Control/Status register - Endpoint W */
#define UDCCSRX         0x4060015C /* UDC Control/Status register - Endpoint X */

#define UDCCSR_DPE      (1 << 9)        /* Data Packet Error */
#define UDCCSR_FEF      (1 << 8)        /* Flush Endpoint FIFO */
#define UDCCSR_SP       (1 << 7)        /* Short Packet Control/Status */
#define UDCCSR_BNE      (1 << 6)        /* Buffer Not Empty (IN endpoints) */
#define UDCCSR_BNF      (1 << 6)        /* Buffer Not Full (OUT endpoints) */
#define UDCCSR_FST      (1 << 5)        /* Force STALL */
#define UDCCSR_SST      (1 << 4)        /* Sent STALL */
#define UDCCSR_DME      (1 << 3)        /* DMA Enable */
#define UDCCSR_TRN      (1 << 2)        /* Tx/Rx NAK */
#define UDCCSR_PC       (1 << 1)        /* Packet Complete */
#define UDCCSR_FS       (1 << 0)        /* FIFO needs service */

#define UDCBCN(x)       __REG2(0x40600200, (x)<<2)
#define UDCBCR0         0x40600200 /* Byte Count Register - EP0 */
#define UDCBCRA         0x40600204 /* Byte Count Register - EPA */
#define UDCBCRB         0x40600208 /* Byte Count Register - EPB */
#define UDCBCRC         0x4060020C /* Byte Count Register - EPC */
#define UDCBCRD         0x40600210 /* Byte Count Register - EPD */
#define UDCBCRE         0x40600214 /* Byte Count Register - EPE */
#define UDCBCRF         0x40600218 /* Byte Count Register - EPF */
#define UDCBCRG         0x4060021C /* Byte Count Register - EPG */
#define UDCBCRH         0x40600220 /* Byte Count Register - EPH */
#define UDCBCRI         0x40600224 /* Byte Count Register - EPI */
#define UDCBCRJ         0x40600228 /* Byte Count Register - EPJ */
#define UDCBCRK         0x4060022C /* Byte Count Register - EPK */
#define UDCBCRL         0x40600230 /* Byte Count Register - EPL */
#define UDCBCRM         0x40600234 /* Byte Count Register - EPM */
#define UDCBCRN         0x40600238 /* Byte Count Register - EPN */
#define UDCBCRP         0x4060023C /* Byte Count Register - EPP */
#define UDCBCRQ         0x40600240 /* Byte Count Register - EPQ */
#define UDCBCRR         0x40600244 /* Byte Count Register - EPR */
#define UDCBCRS         0x40600248 /* Byte Count Register - EPS */
#define UDCBCRT         0x4060024C /* Byte Count Register - EPT */
#define UDCBCRU         0x40600250 /* Byte Count Register - EPU */
#define UDCBCRV         0x40600254 /* Byte Count Register - EPV */
#define UDCBCRW         0x40600258 /* Byte Count Register - EPW */
#define UDCBCRX         0x4060025C /* Byte Count Register - EPX */

#define UDCDN(x)        __REG2(0x40600300, (x)<<2)
#define UDCDR0          0x40600300 /* Data Register - EP0 */
#define UDCDRA          0x40600304 /* Data Register - EPA */
#define UDCDRB          0x40600308 /* Data Register - EPB */
#define UDCDRC          0x4060030C /* Data Register - EPC */
#define UDCDRD          0x40600310 /* Data Register - EPD */
#define UDCDRE          0x40600314 /* Data Register - EPE */
#define UDCDRF          0x40600318 /* Data Register - EPF */
#define UDCDRG          0x4060031C /* Data Register - EPG */
#define UDCDRH          0x40600320 /* Data Register - EPH */
#define UDCDRI          0x40600324 /* Data Register - EPI */
#define UDCDRJ          0x40600328 /* Data Register - EPJ */
#define UDCDRK          0x4060032C /* Data Register - EPK */
#define UDCDRL          0x40600330 /* Data Register - EPL */
#define UDCDRM          0x40600334 /* Data Register - EPM */
#define UDCDRN          0x40600338 /* Data Register - EPN */
#define UDCDRP          0x4060033C /* Data Register - EPP */
#define UDCDRQ          0x40600340 /* Data Register - EPQ */
#define UDCDRR          0x40600344 /* Data Register - EPR */
#define UDCDRS          0x40600348 /* Data Register - EPS */
#define UDCDRT          0x4060034C /* Data Register - EPT */
#define UDCDRU          0x40600350 /* Data Register - EPU */
#define UDCDRV          0x40600354 /* Data Register - EPV */
#define UDCDRW          0x40600358 /* Data Register - EPW */
#define UDCDRX          0x4060035C /* Data Register - EPX */

#define UDCCN(x)        __REG2(0x40600400, (x)<<2)
#define UDCCRA          0x40600404 /* Configuration register EPA */
#define UDCCRB          0x40600408 /* Configuration register EPB */
#define UDCCRC          0x4060040C /* Configuration register EPC */
#define UDCCRD          0x40600410 /* Configuration register EPD */
#define UDCCRE          0x40600414 /* Configuration register EPE */
#define UDCCRF          0x40600418 /* Configuration register EPF */
#define UDCCRG          0x4060041C /* Configuration register EPG */
#define UDCCRH          0x40600420 /* Configuration register EPH */
#define UDCCRI          0x40600424 /* Configuration register EPI */
#define UDCCRJ          0x40600428 /* Configuration register EPJ */
#define UDCCRK          0x4060042C /* Configuration register EPK */
#define UDCCRL          0x40600430 /* Configuration register EPL */
#define UDCCRM          0x40600434 /* Configuration register EPM */
#define UDCCRN          0x40600438 /* Configuration register EPN */
#define UDCCRP          0x4060043C /* Configuration register EPP */
#define UDCCRQ          0x40600440 /* Configuration register EPQ */
#define UDCCRR          0x40600444 /* Configuration register EPR */
#define UDCCRS          0x40600448 /* Configuration register EPS */
#define UDCCRT          0x4060044C /* Configuration register EPT */
#define UDCCRU          0x40600450 /* Configuration register EPU */
#define UDCCRV          0x40600454 /* Configuration register EPV */
#define UDCCRW          0x40600458 /* Configuration register EPW */
#define UDCCRX          0x4060045C /* Configuration register EPX */

#define UDCCONR_CN      (0x03 << 25)    /* Configuration Number */
#define UDCCONR_CN_S    (25)
#define UDCCONR_IN      (0x07 << 22)    /* Interface Number */
#define UDCCONR_IN_S    (22)
#define UDCCONR_AISN    (0x07 << 19)    /* Alternate Interface Number */
#define UDCCONR_AISN_S  (19)
#define UDCCONR_EN      (0x0f << 15)    /* Endpoint Number */
#define UDCCONR_EN_S    (15)
#define UDCCONR_ET      (0x03 << 13)    /* Endpoint Type: */
#define UDCCONR_ET_S    (13)
#define UDCCONR_ET_INT  (0x03 << 13)    /* Interrupt */
#define UDCCONR_ET_BULK (0x02 << 13)    /* Bulk */
#define UDCCONR_ET_ISO  (0x01 << 13)    /* Isochronous */
#define UDCCONR_ET_NU   (0x00 << 13)    /* Not used */
#define UDCCONR_ED      (1 << 12)       /* Endpoint Direction */
#define UDCCONR_MPS     (0x3ff << 2)    /* Maximum Packet Size */
#define UDCCONR_MPS_S   (2)
#define UDCCONR_DE      (1 << 1)        /* Double Buffering Enable */
#define UDCCONR_EE      (1 << 0)        /* Endpoint Enable */


#define UDC_INT_FIFOERROR       (0x2)
#define UDC_INT_PACKETCMP       (0x1)
#define UDC_FNR_MASK            (0x7ff)
#define UDCCSR_WR_MASK          (UDCCSR_DME|UDCCSR_FST)
#define UDC_BCR_MASK            (0x3ff)

#endif /* CONFIG_PXA27X */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)

/******************************************************************************/
/*
 * USB Host Controller
 */
#define OHCI_REGS_BASE  0x4C000000      /* required for ohci driver */
#define UHCREV          0x4C000000
#define UHCHCON         0x4C000004
#define UHCCOMS         0x4C000008
#define UHCINTS         0x4C00000C
#define UHCINTE         0x4C000010
#define UHCINTD         0x4C000014
#define UHCHCCA         0x4C000018
#define UHCPCED         0x4C00001C
#define UHCCHED         0x4C000020
#define UHCCCED         0x4C000024
#define UHCBHED         0x4C000028
#define UHCBCED         0x4C00002C
#define UHCDHEAD        0x4C000030
#define UHCFMI          0x4C000034
#define UHCFMR          0x4C000038
#define UHCFMN          0x4C00003C
#define UHCPERS         0x4C000040
#define UHCLST          0x4C000044
#define UHCRHDA         0x4C000048
#define UHCRHDB         0x4C00004C
#define UHCRHS          0x4C000050
#define UHCRHPS1        0x4C000054
#define UHCRHPS2        0x4C000058
#define UHCRHPS3        0x4C00005C
#define UHCSTAT         0x4C000060
#define UHCHR           0x4C000064
#define UHCHIE          0x4C000068
#define UHCHIT          0x4C00006C

#define UHCHR_FSBIR     (1<<0)
#define UHCHR_FHR       (1<<1)
#define UHCHR_CGR       (1<<2)
#define UHCHR_SSDC      (1<<3)
#define UHCHR_UIT       (1<<4)
#define UHCHR_SSE       (1<<5)
#define UHCHR_PSPL      (1<<6)
#define UHCHR_PCPL      (1<<7)
#define UHCHR_SSEP0     (1<<9)
#define UHCHR_SSEP1     (1<<10)
#define UHCHR_SSEP2     (1<<11)

#define UHCHIE_UPRIE    (1<<13)
#define UHCHIE_UPS2IE   (1<<12)
#define UHCHIE_UPS1IE   (1<<11)
#define UHCHIE_TAIE     (1<<10)
#define UHCHIE_HBAIE    (1<<8)
#define UHCHIE_RWIE     (1<<7)

#define UP2OCR          0x40600020

#define UP2OCR_HXOE     (1<<17)
#define UP2OCR_HXS      (1<<16)
#define UP2OCR_IDON     (1<<10)
#define UP2OCR_EXSUS    (1<<9)
#define UP2OCR_EXSP     (1<<8)
#define UP2OCR_DMSTATE  (1<<7)
#define UP2OCR_VPM      (1<<6)
#define UP2OCR_DPSTATE  (1<<5)
#define UP2OCR_DPPUE    (1<<4)
#define UP2OCR_DMPDE    (1<<3)
#define UP2OCR_DPPDE    (1<<2)
#define UP2OCR_CPVPE    (1<<1)
#define UP2OCR_CPVEN    (1<<0)

#endif  /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

/******************************************************************************/
/*
 * Fast Infrared Communication Port
 */
#define ICCR0           0x40800000  /* ICP Control Register 0 */
#define ICCR1           0x40800004  /* ICP Control Register 1 */
#define ICCR2           0x40800008  /* ICP Control Register 2 */
#define ICDR            0x4080000c  /* ICP Data Register */
#define ICSR0           0x40800014  /* ICP Status Register 0 */
#define ICSR1           0x40800018  /* ICP Status Register 1 */

/*
 * Real Time Clock
 */
#define RCNR            0x40900000  /* RTC Count Register */
#define RTAR            0x40900004  /* RTC Alarm Register */
#define RTSR            0x40900008  /* RTC Status Register */
#define RTTR            0x4090000C  /* RTC Timer Trim Register */
#define RDAR1           0x40900018  /* Wristwatch Day Alarm Reg 1 */
#define RDAR2           0x40900020  /* Wristwatch Day Alarm Reg 2 */
#define RYAR1           0x4090001C  /* Wristwatch Year Alarm Reg 1 */
#define RYAR2           0x40900024  /* Wristwatch Year Alarm Reg 2 */
#define SWAR1           0x4090002C  /* Stopwatch Alarm Register 1 */
#define SWAR2           0x40900030  /* Stopwatch Alarm Register 2 */
#define PIAR            0x40900038  /* Periodic Interrupt Alarm Register */
#define RDCR            0x40900010  /* RTC Day Count Register. */
#define RYCR            0x40900014  /* RTC Year Count Register. */
#define SWCR            0x40900028  /* Stopwatch Count Register */
#define RTCPICR         0x40900034  /* Periodic Interrupt Counter Register */

#define RTSR_PICE       (1 << 15)       /* Peridoc interrupt count enable */
#define RTSR_PIALE      (1 << 14)       /* Peridoc interrupt Alarm enable */
#define RTSR_PIAL       (1 << 13)       /* Peridoc  interrupt Alarm status */
#define RTSR_HZE        (1 << 3)        /* HZ interrupt enable */
#define RTSR_ALE        (1 << 2)        /* RTC alarm interrupt enable */
#define RTSR_HZ         (1 << 1)        /* HZ rising-edge detected */
#define RTSR_AL         (1 << 0)        /* RTC alarm detected */

/******************************************************************************/
/*
 * OS Timer & Match Registers
 */
#define OSMR0           0x40A00000  /* OS Timer Match Register 0 */
#define OSMR1           0x40A00004  /* OS Timer Match Register 1 */
#define OSMR2           0x40A00008  /* OS Timer Match Register 2 */
#define OSMR3           0x40A0000C  /* OS Timer Match Register 3 */
#define OSCR            0x40A00010  /* OS Timer Counter Register */
#define OSSR            0x40A00014  /* OS Timer Status Register */
#define OWER            0x40A00018  /* OS Timer Watchdog Enable Register */
#define OIER            0x40A0001C  /* OS Timer Interrupt Enable Register */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define OSCR4           0x40A00040  /* OS Timer Counter Register 4 */
#define OSCR5           0x40A00044  /* OS Timer Counter Register 5 */
#define OSCR6           0x40A00048  /* OS Timer Counter Register 6 */
#define OSCR7           0x40A0004C  /* OS Timer Counter Register 7 */
#define OSCR8           0x40A00050  /* OS Timer Counter Register 8 */
#define OSCR9           0x40A00054  /* OS Timer Counter Register 9 */
#define OSCR10          0x40A00058  /* OS Timer Counter Register 10 */
#define OSCR11          0x40A0005C  /* OS Timer Counter Register 11 */

#define OSMR4           0x40A00080  /* OS Timer Match Register 4 */
#define OSMR5           0x40A00084  /* OS Timer Match Register 5 */
#define OSMR6           0x40A00088  /* OS Timer Match Register 6 */
#define OSMR7           0x40A0008C  /* OS Timer Match Register 7 */
#define OSMR8           0x40A00090  /* OS Timer Match Register 8 */
#define OSMR9           0x40A00094  /* OS Timer Match Register 9 */
#define OSMR10          0x40A00098  /* OS Timer Match Register 10 */
#define OSMR11          0x40A0009C  /* OS Timer Match Register 11 */

#define OMCR4           0x40A000C0  /* OS Match Control Register 4 */
#define OMCR5           0x40A000C4  /* OS Match Control Register 5 */
#define OMCR6           0x40A000C8  /* OS Match Control Register 6 */
#define OMCR7           0x40A000CC  /* OS Match Control Register 7 */
#define OMCR8           0x40A000D0  /* OS Match Control Register 8 */
#define OMCR9           0x40A000D4  /* OS Match Control Register 9 */
#define OMCR10          0x40A000D8  /* OS Match Control Register 10 */
#define OMCR11          0x40A000DC  /* OS Match Control Register 11 */

#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

#define OSSR_M4         (1 << 4)        /* Match status channel 4 */
#define OSSR_M3         (1 << 3)        /* Match status channel 3 */
#define OSSR_M2         (1 << 2)        /* Match status channel 2 */
#define OSSR_M1         (1 << 1)        /* Match status channel 1 */
#define OSSR_M0         (1 << 0)        /* Match status channel 0 */

#define OWER_WME        (1 << 0)        /* Watchdog Match Enable */

#define OIER_E4         (1 << 4)        /* Interrupt enable channel 4 */
#define OIER_E3         (1 << 3)        /* Interrupt enable channel 3 */
#define OIER_E2         (1 << 2)        /* Interrupt enable channel 2 */
#define OIER_E1         (1 << 1)        /* Interrupt enable channel 1 */
#define OIER_E0         (1 << 0)        /* Interrupt enable channel 0 */

#define OSCR_CLK_FREQ   3250

/******************************************************************************/
/*
 * Core Clock
 */

#if defined(CONFIG_CPU_MONAHANS)
#define ACCR            0x41340000  /* Application Subsystem Clock Configuration Register */
#define ACSR            0x41340004  /* Application Subsystem Clock Status Register */
#define AICSR           0x41340008  /* Application Subsystem Interrupt Control/Status Register */
#define CKENA           0x4134000C  /* A Clock Enable Register */
#define CKENB           0x41340010  /* B Clock Enable Register */
#define AC97_DIV        0x41340014  /* AC97 clock divisor value register */

#define ACCR_SMC_MASK   0x03800000      /* Static Memory Controller Frequency Select */
#define ACCR_SRAM_MASK  0x000c0000      /* SRAM Controller Frequency Select */
#define ACCR_FC_MASK    0x00030000      /* Frequency Change Frequency Select */
#define ACCR_HSIO_MASK  0x0000c000      /* High Speed IO Frequency Select */
#define ACCR_DDR_MASK   0x00003000      /* DDR Memory Controller Frequency Select */
#define ACCR_XN_MASK    0x00000700      /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#define ACCR_XL_MASK    0x0000001f      /* Crystal Frequency to Memory Frequency Multiplier */
#define ACCR_XPDIS      (1 << 31)
#define ACCR_SPDIS      (1 << 30)
#define ACCR_13MEND1    (1 << 27)
#define ACCR_D0CS       (1 << 26)
#define ACCR_13MEND2    (1 << 21)
#define ACCR_PCCE       (1 << 11)

#define CKENA_30_MSL0   (1 << 30)       /* MSL0 Interface Unit Clock Enable */
#define CKENA_29_SSP4   (1 << 29)       /* SSP3 Unit Clock Enable */
#define CKENA_28_SSP3   (1 << 28)       /* SSP2 Unit Clock Enable */
#define CKENA_27_SSP2   (1 << 27)       /* SSP1 Unit Clock Enable */
#define CKENA_26_SSP1   (1 << 26)       /* SSP0 Unit Clock Enable */
#define CKENA_25_TSI    (1 << 25)       /* TSI Clock Enable */
#define CKENA_24_AC97   (1 << 24)       /* AC97 Unit Clock Enable */
#define CKENA_23_STUART (1 << 23)       /* STUART Unit Clock Enable */
#define CKENA_22_FFUART (1 << 22)       /* FFUART Unit Clock Enable */
#define CKENA_21_BTUART (1 << 21)       /* BTUART Unit Clock Enable */
#define CKENA_20_UDC    (1 << 20)       /* UDC Clock Enable */
#define CKENA_19_TPM    (1 << 19)       /* TPM Unit Clock Enable */
#define CKENA_18_USIM1  (1 << 18)       /* USIM1 Unit Clock Enable */
#define CKENA_17_USIM0  (1 << 17)       /* USIM0 Unit Clock Enable */
#define CKENA_15_CIR    (1 << 15)       /* Consumer IR Clock Enable */
#define CKENA_14_KEY    (1 << 14)       /* Keypad Controller Clock Enable */
#define CKENA_13_MMC1   (1 << 13)       /* MMC1 Clock Enable */
#define CKENA_12_MMC0   (1 << 12)       /* MMC0 Clock Enable */
#define CKENA_11_FLASH  (1 << 11)       /* Boot ROM Clock Enable */
#define CKENA_10_SRAM   (1 << 10)       /* SRAM Controller Clock Enable */
#define CKENA_9_SMC     (1 << 9)        /* Static Memory Controller */
#define CKENA_8_DMC     (1 << 8)        /* Dynamic Memory Controller */
#define CKENA_7_GRAPHICS (1 << 7)       /* 2D Graphics Clock Enable */
#define CKENA_6_USBCLI  (1 << 6)        /* USB Client Unit Clock Enable */
#define CKENA_4_NAND    (1 << 4)        /* NAND Flash Controller Clock Enable */
#define CKENA_3_CAMERA  (1 << 3)        /* Camera Interface Clock Enable */
#define CKENA_2_USBHOST (1 << 2)        /* USB Host Unit Clock Enable */
#define CKENA_1_LCD     (1 << 1)        /* LCD Unit Clock Enable */

#define CKENB_9_SYSBUS2 (1 << 9)        /* System bus 2 */
#define CKENB_8_1WIRE   (1 << 8)        /* One Wire Interface Unit Clock Enable */
#define CKENB_7_GPIO    (1 << 7)        /* GPIO Clock Enable */
#define CKENB_6_IRQ     (1 << 6)        /* Interrupt Controller Clock Enable */
#define CKENB_4_I2C     (1 << 4)        /* I2C Unit Clock Enable */
#define CKENB_1_PWM1    (1 << 1)        /* PWM2 & PWM3 Clock Enable */
#define CKENB_0_PWM0    (1 << 0)        /* PWM0 & PWM1 Clock Enable */

#else /* if defined CONFIG_CPU_MONAHANS */

#define CCCR            0x41300000  /* Core Clock Configuration Register */
#define CKEN            0x41300004  /* Clock Enable Register */
#define OSCC            0x41300008  /* Oscillator Configuration Register */
#define CCSR            0x4130000C /* Core Clock Status Register */

#define CKEN23_SSP1     (1 << 23) /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC     (1 << 22) /* Memory Controler */
#define CKEN21_MSHC     (1 << 21) /* Memery Stick Host Controller */
#define CKEN20_IM       (1 << 20) /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD   (1 << 19) /* Keypad Interface Clock Enable */
#define CKEN18_USIM     (1 << 18) /* USIM Unit Clock Enable */
#define CKEN17_MSL      (1 << 17) /* MSL Interface Unit Clock Enable */
#define CKEN15_PWR_I2C  (1 << 15) /* PWR_I2C Unit Clock Enable */
#define CKEN9_OST       (1 << 9)  /* OS Timer Unit Clock Enable */
#define CKEN4_SSP3      (1 << 4)  /* SSP3 Unit Clock Enable */

#define CCCR_N_MASK     0x0380          /* Run Mode Frequency to Turbo Mode Frequency Multiplier */
#if !defined(CONFIG_PXA27X)
#define CCCR_M_MASK     0x0060          /* Memory Frequency to Run Mode Frequency Multiplier */
#endif
#define CCCR_L_MASK     0x001f          /* Crystal Frequency to Memory Frequency Multiplier */

#define CKEN24_CAMERA   (1 << 24)       /* Camera Interface Clock Enable */
#define CKEN23_SSP1     (1 << 23)       /* SSP1 Unit Clock Enable */
#define CKEN22_MEMC     (1 << 22)       /* Memory Controller Clock Enable */
#define CKEN21_MEMSTK   (1 << 21)       /* Memory Stick Host Controller */
#define CKEN20_IM       (1 << 20)       /* Internal Memory Clock Enable */
#define CKEN19_KEYPAD   (1 << 19)       /* Keypad Interface Clock Enable */
#define CKEN18_USIM     (1 << 18)       /* USIM Unit Clock Enable */
#define CKEN17_MSL      (1 << 17)       /* MSL Unit Clock Enable */
#define CKEN16_LCD      (1 << 16)       /* LCD Unit Clock Enable */
#define CKEN15_PWRI2C   (1 << 15)       /* PWR I2C Unit Clock Enable */
#define CKEN14_I2C      (1 << 14)       /* I2C Unit Clock Enable */
#define CKEN13_FICP     (1 << 13)       /* FICP Unit Clock Enable */
#define CKEN12_MMC      (1 << 12)       /* MMC Unit Clock Enable */
#define CKEN11_USB      (1 << 11)       /* USB Unit Clock Enable */
#if defined(CONFIG_PXA27X)
#define CKEN10_USBHOST  (1 << 10)       /* USB Host Unit Clock Enable */
#define CKEN24_CAMERA   (1 << 24)       /* Camera Unit Clock Enable */
#endif
#define CKEN8_I2S       (1 << 8)        /* I2S Unit Clock Enable */
#define CKEN7_BTUART    (1 << 7)        /* BTUART Unit Clock Enable */
#define CKEN6_FFUART    (1 << 6)        /* FFUART Unit Clock Enable */
#define CKEN5_STUART    (1 << 5)        /* STUART Unit Clock Enable */
#define CKEN3_SSP       (1 << 3)        /* SSP Unit Clock Enable */
#define CKEN2_AC97      (1 << 2)        /* AC97 Unit Clock Enable */
#define CKEN1_PWM1      (1 << 1)        /* PWM1 Clock Enable */
#define CKEN0_PWM0      (1 << 0)        /* PWM0 Clock Enable */

#define OSCC_OON        (1 << 1)        /* 32.768kHz OON (write-once only bit) */
#define OSCC_OOK        (1 << 0)        /* 32.768kHz OOK (read-only bit) */

#if !defined(CONFIG_PXA27X)
#define  CCCR_L09      (0x1F)
#define  CCCR_L27      (0x1)
#define  CCCR_L32      (0x2)
#define  CCCR_L36      (0x3)
#define  CCCR_L40      (0x4)
#define  CCCR_L45      (0x5)

#define  CCCR_M1       (0x1 << 5)
#define  CCCR_M2       (0x2 << 5)
#define  CCCR_M4       (0x3 << 5)

#define  CCCR_N10      (0x2 << 7)
#define  CCCR_N15      (0x3 << 7)
#define  CCCR_N20      (0x4 << 7)
#define  CCCR_N25      (0x5 << 7)
#define  CCCR_N30      (0x6 << 7)
#endif

#endif /* CONFIG_CPU_MONAHANS */

/******************************************************************************/
/*
 * Pulse Width Modulator
 */
#define PWM_CTRL0       0x40B00000  /* PWM 0 Control Register */
#define PWM_PWDUTY0     0x40B00004  /* PWM 0 Duty Cycle Register */
#define PWM_PERVAL0     0x40B00008  /* PWM 0 Period Control Register */

#define PWM_CTRL1       0x40C00000  /* PWM 1 Control Register */
#define PWM_PWDUTY1     0x40C00004  /* PWM 1 Duty Cycle Register */
#define PWM_PERVAL1     0x40C00008  /* PWM 1 Period Control Register */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define PWM_CTRL2       0x40B00010  /* PWM 2 Control Register */
#define PWM_PWDUTY2     0x40B00014  /* PWM 2 Duty Cycle Register */
#define PWM_PERVAL2     0x40B00018  /* PWM 2 Period Control Register */

#define PWM_CTRL3       0x40C00010  /* PWM 3 Control Register */
#define PWM_PWDUTY3     0x40C00014  /* PWM 3 Duty Cycle Register */
#define PWM_PERVAL3     0x40C00018  /* PWM 3 Period Control Register */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

/*
 * Interrupt Controller
 */
#define ICIP            0x40D00000  /* Interrupt Controller IRQ Pending Register */
#define ICMR            0x40D00004  /* Interrupt Controller Mask Register */
#define ICLR            0x40D00008  /* Interrupt Controller Level Register */
#define ICFP            0x40D0000C  /* Interrupt Controller FIQ Pending Register */
#define ICPR            0x40D00010  /* Interrupt Controller Pending Register */
#define ICCR            0x40D00014  /* Interrupt Controller Control Register */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define ICHP            0x40D00018  /* Interrupt Controller Highest Priority Register */
#define ICIP2           0x40D0009C  /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2           0x40D000A0  /* Interrupt Controller Mask Register 2 */
#define ICLR2           0x40D000A4  /* Interrupt Controller Level Register 2 */
#define ICFP2           0x40D000A8  /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2           0x40D000AC  /* Interrupt Controller Pending Register 2 */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

/******************************************************************************/
/*
 * General Purpose I/O
 */
#define GPLR0           0x40E00000  /* GPIO Pin-Level Register GPIO<31:0> */
#define GPLR1           0x40E00004  /* GPIO Pin-Level Register GPIO<63:32> */
#define GPLR2           0x40E00008  /* GPIO Pin-Level Register GPIO<80:64> */

#define GPDR0           0x40E0000C  /* GPIO Pin Direction Register GPIO<31:0> */
#define GPDR1           0x40E00010  /* GPIO Pin Direction Register GPIO<63:32> */
#define GPDR2           0x40E00014  /* GPIO Pin Direction Register GPIO<80:64> */

#define GPSR0           0x40E00018  /* GPIO Pin Output Set Register GPIO<31:0> */
#define GPSR1           0x40E0001C  /* GPIO Pin Output Set Register GPIO<63:32> */
#define GPSR2           0x40E00020  /* GPIO Pin Output Set Register GPIO<80:64> */

#define GPCR0           0x40E00024  /* GPIO Pin Output Clear Register GPIO<31:0> */
#define GPCR1           0x40E00028  /* GPIO Pin Output Clear Register GPIO <63:32> */
#define GPCR2           0x40E0002C  /* GPIO Pin Output Clear Register GPIO <80:64> */

#define GRER0           0x40E00030  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
#define GRER1           0x40E00034  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
#define GRER2           0x40E00038  /* GPIO Rising-Edge Detect Register GPIO<80:64> */

#define GFER0           0x40E0003C  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
#define GFER1           0x40E00040  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
#define GFER2           0x40E00044  /* GPIO Falling-Edge Detect Register GPIO<80:64> */

#define GEDR0           0x40E00048  /* GPIO Edge Detect Status Register GPIO<31:0> */
#define GEDR1           0x40E0004C  /* GPIO Edge Detect Status Register GPIO<63:32> */
#define GEDR2           0x40E00050  /* GPIO Edge Detect Status Register GPIO<80:64> */

#define GAFR0_L         0x40E00054  /* GPIO Alternate Function Select Register GPIO<15:0> */
#define GAFR0_U         0x40E00058  /* GPIO Alternate Function Select Register GPIO<31:16> */
#define GAFR1_L         0x40E0005C  /* GPIO Alternate Function Select Register GPIO<47:32> */
#define GAFR1_U         0x40E00060  /* GPIO Alternate Function Select Register GPIO<63:48> */
#define GAFR2_L         0x40E00064  /* GPIO Alternate Function Select Register GPIO<79:64> */
#define GAFR2_U         0x40E00068  /* GPIO Alternate Function Select Register GPIO 80 */

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR3           0x40E00100  /* GPIO Pin-Level Register GPIO<127:96> */
#define GPDR3           0x40E0010C  /* GPIO Pin Direction Register GPIO<127:96> */
#define GPSR3           0x40E00118  /* GPIO Pin Output Set Register GPIO<127:96> */
#define GPCR3           0x40E00124  /* GPIO Pin Output Clear Register GPIO<127:96> */
#define GRER3           0x40E00130  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
#define GFER3           0x40E0013C  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
#define GEDR3           0x40E00148  /* GPIO Edge Detect Status Register GPIO<127:96> */
#define GAFR3_L         0x40E0006C  /* GPIO Alternate Function Select Register GPIO<111:96> */
#define GAFR3_U         0x40E00070  /* GPIO Alternate Function Select Register GPIO<127:112> */
#endif /* CONFIG_PXA27X || CONFIG_CPU_MONAHANS */

#ifdef CONFIG_CPU_MONAHANS
#define GSDR0           0x40E00400 /* Bit-wise Set of GPDR[31:0] */
#define GSDR1           0x40E00404 /* Bit-wise Set of GPDR[63:32] */
#define GSDR2           0x40E00408 /* Bit-wise Set of GPDR[95:64] */
#define GSDR3           0x40E0040C /* Bit-wise Set of GPDR[127:96] */

#define GCDR0           0x40E00420 /* Bit-wise Clear of GPDR[31:0] */
#define GCDR1           0x40E00424 /* Bit-wise Clear of GPDR[63:32] */
#define GCDR2           0x40E00428 /* Bit-wise Clear of GPDR[95:64] */
#define GCDR3           0x40E0042C /* Bit-wise Clear of GPDR[127:96] */

#define GSRER0          0x40E00440 /* Set Rising Edge Det. Enable [31:0] */
#define GSRER1          0x40E00444 /* Set Rising Edge Det. Enable [63:32] */
#define GSRER2          0x40E00448 /* Set Rising Edge Det. Enable [95:64] */
#define GSRER3          0x40E0044C /* Set Rising Edge Det. Enable [127:96] */

#define GCRER0          0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */
#define GCRER1          0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */
#define GCRER2          0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */
#define GCRER3          0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */

#define GSFER0          0x40E00480 /* Set Falling Edge Det. Enable [31:0] */
#define GSFER1          0x40E00484 /* Set Falling Edge Det. Enable [63:32] */
#define GSFER2          0x40E00488 /* Set Falling Edge Det. Enable [95:64] */
#define GSFER3          0x40E0048C /* Set Falling Edge Det. Enable[127:96] */

#define GCFER0          0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */
#define GCFER1          0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */
#define GCFER2          0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */
#define GCFER3          0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */

#define GSDR(x)         (0x40E00400 | ((x) & 0x60) >> 3)
#define GCDR(x)         (0x40E00420 | ((x) & 0x60) >> 3)
#endif

#define _GPLR(x)        (0x40E00000 + (((x) & 0x60) >> 3))
#define _GPDR(x)        (0x40E0000C + (((x) & 0x60) >> 3))
#define _GPSR(x)        (0x40E00018 + (((x) & 0x60) >> 3))
#define _GPCR(x)        (0x40E00024 + (((x) & 0x60) >> 3))
#define _GRER(x)        (0x40E00030 + (((x) & 0x60) >> 3))
#define _GFER(x)        (0x40E0003C + (((x) & 0x60) >> 3))
#define _GEDR(x)        (0x40E00048 + (((x) & 0x60) >> 3))
#define _GAFR(x)        (0x40E00054 + (((x) & 0x70) >> 2))

#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
#define GPLR(x)         (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3))
#define GPDR(x)         (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3))
#define GPSR(x)         (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3))
#define GPCR(x)         (((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3))
#define GRER(x)         (((((x) & 0x7f) < 96) ? _GRER(x) : GRER3))
#define GFER(x)         (((((x) & 0x7f) < 96) ? _GFER(x) : GFER3))
#define GEDR(x)         (((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3))
#define GAFR(x)         (((((x) & 0x7f) < 96) ? _GAFR(x) : \
                        ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U)))
#else
#define GPLR(x)         _GPLR(x)
#define GPDR(x)         _GPDR(x)
#define GPSR(x)         _GPSR(x)
#define GPCR(x)         _GPCR(x)
#define GRER(x)         _GRER(x)
#define GFER(x)         _GFER(x)
#define GEDR(x)         _GEDR(x)
#define GAFR(x)         _GAFR(x)
#endif

#define GPIO_bit(x)     (1 << ((x) & 0x1f))

/******************************************************************************/
/*
 * Multi-function Pin Registers:
 */
/* PXA320 */
#if defined(CONFIG_CPU_PXA320)
#define DF_IO0          0x40e1024c
#define DF_IO1          0x40e10254
#define DF_IO2          0x40e1025c
#define DF_IO3          0x40e10264
#define DF_IO4          0x40e1026c
#define DF_IO5          0x40e10274
#define DF_IO6          0x40e1027c
#define DF_IO7          0x40e10284
#define DF_IO8          0x40e10250
#define DF_IO9          0x40e10258
#define DF_IO10         0x40e10260
#define DF_IO11         0x40e10268
#define DF_IO12         0x40e10270
#define DF_IO13         0x40e10278
#define DF_IO14         0x40e10280
#define DF_IO15         0x40e10288
#define DF_CLE_nOE      0x40e10204
#define DF_ALE_nWE1     0x40e10208
#define DF_ALE_nWE2     0x40e1021c
#define DF_SCLK_E       0x40e10210
#define DF_nCS0         0x40e10224
#define DF_nCS1         0x40e10228
#define nBE0            0x40e10214
#define nBE1            0x40e10218
#define nLUA            0x40e10234
#define nLLA            0x40e10238
#define DF_ADDR0        0x40e1023c
#define DF_ADDR1        0x40e10240
#define DF_ADDR2        0x40e10244
#define DF_ADDR3        0x40e10248
#define DF_INT_RnB      0x40e10220
#define DF_nCS0         0x40e10224
#define DF_nCS1         0x40e10228
#define DF_nWE          0x40e1022c
#define DF_nRE          0x40e10230

#define nXCVREN         0x40e10138

#define GPIO0           0x40e10124
#define GPIO1           0x40e10128
#define GPIO2           0x40e1012c
#define GPIO3           0x40e10130
#define GPIO4           0x40e10134
#define GPIO5           0x40e1028c
#define GPIO6           0x40e10290
#define GPIO7           0x40e10294
#define GPIO8           0x40e10298
#define GPIO9           0x40e1029c
#define GPIO10          0x40e10458
#define GPIO11          0x40e102a0
#define GPIO12          0x40e102a4
#define GPIO13          0x40e102a8
#define GPIO14          0x40e102ac
#define GPIO15          0x40e102b0
#define GPIO16          0x40e102b4
#define GPIO17          0x40e102b8
#define GPIO18          0x40e102bc
#define GPIO19          0x40e102c0
#define GPIO20          0x40e102c4
#define GPIO21          0x40e102c8
#define GPIO22          0x40e102cc
#define GPIO23          0x40e102d0
#define GPIO24          0x40e102d4
#define GPIO25          0x40e102d8
#define GPIO26          0x40e102dc

#define GPIO27          0x40e10400
#define GPIO28          0x40e10404
#define GPIO29          0x40e10408
#define GPIO30          0x40e1040c
#define GPIO31          0x40e10410
#define GPIO32          0x40e10414
#define GPIO33          0x40e10418
#define GPIO34          0x40e1041c
#define GPIO35          0x40e10420
#define GPIO36          0x40e10424
#define GPIO37          0x40e10428
#define GPIO38          0x40e1042c
#define GPIO39          0x40e10430
#define GPIO40          0x40e10434
#define GPIO41          0x40e10438
#define GPIO42          0x40e1043c
#define GPIO43          0x40e10440
#define GPIO44          0x40e10444
#define GPIO45          0x40e10448
#define GPIO46          0x40e1044c
#define GPIO47          0x40e10450
#define GPIO48          0x40e10454
#define GPIO49          0x40e1045c
#define GPIO50          0x40e10460
#define GPIO51          0x40e10464
#define GPIO52          0x40e10468
#define GPIO53          0x40e1046c
#define GPIO54          0x40e10470
#define GPIO55          0x40e10474
#define GPIO56          0x40e10478
#define GPIO57          0x40e1047c
#define GPIO58          0x40e10480
#define GPIO59          0x40e10484
#define GPIO60          0x40e10488
#define GPIO61          0x40e1048c
#define GPIO62          0x40e10490

#define GPIO6_2         0x40e10494
#define GPIO7_2         0x40e10498
#define GPIO8_2         0x40e1049c
#define GPIO9_2         0x40e104a0
#define GPIO10_2        0x40e104a4
#define GPIO11_2        0x40e104a8
#define GPIO12_2        0x40e104ac
#define GPIO13_2        0x40e104b0

#define GPIO63          0x40e104b4
#define GPIO64          0x40e104b8
#define GPIO65          0x40e104bc
#define GPIO66          0x40e104c0
#define GPIO67          0x40e104c4
#define GPIO68          0x40e104c8
#define GPIO69          0x40e104cc
#define GPIO70          0x40e104d0
#define GPIO71          0x40e104d4
#define GPIO72          0x40e104d8
#define GPIO73          0x40e104dc

#define GPIO14_2        0x40e104e0
#define GPIO15_2        0x40e104e4
#define GPIO16_2        0x40e104e8
#define GPIO17_2        0x40e104ec

#define GPIO74          0x40e104f0
#define GPIO75          0x40e104f4
#define GPIO76          0x40e104f8
#define GPIO77          0x40e104fc
#define GPIO78          0x40e10500
#define GPIO79          0x40e10504
#define GPIO80          0x40e10508
#define GPIO81          0x40e1050c
#define GPIO82          0x40e10510
#define GPIO83          0x40e10514
#define GPIO84          0x40e10518
#define GPIO85          0x40e1051c
#define GPIO86          0x40e10520
#define GPIO87          0x40e10524
#define GPIO88          0x40e10528
#define GPIO89          0x40e1052c
#define GPIO90          0x40e10530
#define GPIO91          0x40e10534
#define GPIO92          0x40e10538
#define GPIO93          0x40e1053c
#define GPIO94          0x40e10540
#define GPIO95          0x40e10544
#define GPIO96          0x40e10548
#define GPIO97          0x40e1054c
#define GPIO98          0x40e10550

#define GPIO99          0x40e10600
#define GPIO100         0x40e10604
#define GPIO101         0x40e10608
#define GPIO102         0x40e1060c
#define GPIO103         0x40e10610
#define GPIO104         0x40e10614
#define GPIO105         0x40e10618
#define GPIO106         0x40e1061c
#define GPIO107         0x40e10620
#define GPIO108         0x40e10624
#define GPIO109         0x40e10628
#define GPIO110         0x40e1062c
#define GPIO111         0x40e10630
#define GPIO112         0x40e10634

#define GPIO113         0x40e10638
#define GPIO114         0x40e1063c
#define GPIO115         0x40e10640
#define GPIO116         0x40e10644
#define GPIO117         0x40e10648
#define GPIO118         0x40e1064c
#define GPIO119         0x40e10650
#define GPIO120         0x40e10654
#define GPIO121         0x40e10658
#define GPIO122         0x40e1065c
#define GPIO123         0x40e10660
#define GPIO124         0x40e10664
#define GPIO125         0x40e10668
#define GPIO126         0x40e1066c
#define GPIO127         0x40e10670

#define GPIO0_2         0x40e10674
#define GPIO1_2         0x40e10678
#define GPIO2_2         0x40e1067c
#define GPIO3_2         0x40e10680
#define GPIO4_2         0x40e10684
#define GPIO5_2         0x40e10688

/* PXA300 and PXA310 */
#elif   defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310)
#define DF_IO0          0x40e10220
#define DF_IO1          0x40e10228
#define DF_IO2          0x40e10230
#define DF_IO3          0x40e10238
#define DF_IO4          0x40e10258
#define DF_IO5          0x40e10260
#define DF_IO7          0x40e10270
#define DF_IO6          0x40e10268
#define DF_IO8          0x40e10224
#define DF_IO9          0x40e1022c
#define DF_IO10         0x40e10234
#define DF_IO11         0x40e1023c
#define DF_IO12         0x40e1025c
#define DF_IO13         0x40e10264
#define DF_IO14         0x40e1026c
#define DF_IO15         0x40e10274
#define DF_CLE_NOE      0x40e10240
#define DF_ALE_nWE      0x40e1020c
#define DF_SCLK_E       0x40e10250
#define nCS0            0x40e100c4
#define nCS1            0x40e100c0
#define nBE0            0x40e10204
#define nBE1            0x40e10208
#define nLUA            0x40e10244
#define nLLA            0x40e10254
#define DF_ADDR0        0x40e10210
#define DF_ADDR1        0x40e10214
#define DF_ADDR2        0x40e10218
#define DF_ADDR3        0x40e1021c
#define DF_INT_RnB      0x40e100c8
#define DF_nCS0         0x40e10248
#define DF_nCS1         0x40e10278
#define DF_nWE          0x40e100cc
#define DF_nRE          0x40e10200

#define GPIO0           0x40e100b4
#define GPIO1           0x40e100b8
#define GPIO2           0x40e100bc
#define GPIO3           0x40e1027c
#define GPIO4           0x40e10280

#define GPIO5           0x40e10284
#define GPIO6           0x40e10288
#define GPIO7           0x40e1028c
#define GPIO8           0x40e10290
#define GPIO9           0x40e10294
#define GPIO10          0x40e10298
#define GPIO11          0x40e1029c
#define GPIO12          0x40e102a0
#define GPIO13          0x40e102a4
#define GPIO14          0x40e102a8
#define GPIO15          0x40e102ac
#define GPIO16          0x40e102b0
#define GPIO17          0x40e102b4
#define GPIO18          0x40e102b8
#define GPIO19          0x40e102bc
#define GPIO20          0x40e102c0
#define GPIO21          0x40e102c4
#define GPIO22          0x40e102c8
#define GPIO23          0x40e102cc
#define GPIO24          0x40e102d0
#define GPIO25          0x40e102d4
#define GPIO26          0x40e102d8

#define GPIO27          0x40e10400
#define GPIO28          0x40e10404
#define GPIO29          0x40e10408
#define ULPI_STP        0x40e1040c
#define ULPI_NXT        0x40e10410
#define ULPI_DIR        0x40e10414
#define GPIO30          0x40e10418
#define GPIO31          0x40e1041c
#define GPIO32          0x40e10420
#define GPIO33          0x40e10424
#define GPIO34          0x40e10428
#define GPIO35          0x40e1042c
#define GPIO36          0x40e10430
#define GPIO37          0x40e10434
#define GPIO38          0x40e10438
#define GPIO39          0x40e1043c
#define GPIO40          0x40e10440
#define GPIO41          0x40e10444
#define GPIO42          0x40e10448
#define GPIO43          0x40e1044c
#define GPIO44          0x40e10450
#define GPIO45          0x40e10454
#define GPIO46          0x40e10458
#define GPIO47          0x40e1045c
#define GPIO48          0x40e10460

#define GPIO49          0x40e10464
#define GPIO50          0x40e10468
#define GPIO51          0x40e1046c
#define GPIO52          0x40e10470
#define GPIO53          0x40e10474
#define GPIO54          0x40e10478
#define GPIO55          0x40e1047c
#define GPIO56          0x40e10480
#define GPIO57          0x40e10484
#define GPIO58          0x40e10488
#define GPIO59          0x40e1048c
#define GPIO60          0x40e10490
#define GPIO61          0x40e10494
#define GPIO62          0x40e10498
#define GPIO63          0x40e1049c
#define GPIO64          0x40e104a0
#define GPIO65          0x40e104a4
#define GPIO66          0x40e104a8
#define GPIO67          0x40e104ac
#define GPIO68          0x40e104b0
#define GPIO69          0x40e104b4
#define GPIO70          0x40e104b8
#define GPIO71          0x40e104bc
#define GPIO72          0x40e104c0
#define GPIO73          0x40e104c4
#define GPIO74          0x40e104c8
#define GPIO75          0x40e104cc
#define GPIO76          0x40e104d0
#define GPIO77          0x40e104d4
#define GPIO78          0x40e104d8
#define GPIO79          0x40e104dc
#define GPIO80          0x40e104e0
#define GPIO81          0x40e104e4
#define GPIO82          0x40e104e8
#define GPIO83          0x40e104ec
#define GPIO84          0x40e104f0
#define GPIO85          0x40e104f4
#define GPIO86          0x40e104f8
#define GPIO87          0x40e104fc
#define GPIO88          0x40e10500
#define GPIO89          0x40e10504
#define GPIO90          0x40e10508
#define GPIO91          0x40e1050c
#define GPIO92          0x40e10510
#define GPIO93          0x40e10514
#define GPIO94          0x40e10518
#define GPIO95          0x40e1051c
#define GPIO96          0x40e10520
#define GPIO97          0x40e10524
#define GPIO98          0x40e10528

#define GPIO99          0x40e10600
#define GPIO100         0x40e10604
#define GPIO101         0x40e10608
#define GPIO102         0x40e1060c
#define GPIO103         0x40e10610
#define GPIO104         0x40e10614
#define GPIO105         0x40e10618
#define GPIO106         0x40e1061c
#define GPIO107         0x40e10620
#define GPIO108         0x40e10624
#define GPIO109         0x40e10628
#define GPIO110         0x40e1062c
#define GPIO111         0x40e10630
#define GPIO112         0x40e10634

#define GPIO113         0x40e10638
#define GPIO114         0x40e1063c
#define GPIO115         0x40e10640
#define GPIO116         0x40e10644
#define GPIO117         0x40e10648
#define GPIO118         0x40e1064c
#define GPIO119         0x40e10650
#define GPIO120         0x40e10654
#define GPIO121         0x40e10658
#define GPIO122         0x40e1065c
#define GPIO123         0x40e10660
#define GPIO124         0x40e10664
#define GPIO125         0x40e10668
#define GPIO126         0x40e1066c
#define GPIO127         0x40e10670

#define GPIO0_2         0x40e10674
#define GPIO1_2         0x40e10678
#define GPIO2_2         0x40e102dc
#define GPIO3_2         0x40e102e0
#define GPIO4_2         0x40e102e4
#define GPIO5_2         0x40e102e8
#define GPIO6_2         0x40e102ec

#ifndef CONFIG_CPU_PXA300       /* PXA310 only */
#define GPIO7_2         0x40e1052c
#define GPIO8_2         0x40e10530
#define GPIO9_2         0x40e10534
#define GPIO10_2        0x40e10538
#endif
#endif

#ifdef CONFIG_CPU_MONAHANS
/* MFPR Bit Definitions, see 4-10, Vol. 1 */
#define PULL_SEL        0x8000
#define PULLUP_EN       0x4000
#define PULLDOWN_EN     0x2000

#define DRIVE_FAST_1mA  0x0
#define DRIVE_FAST_2mA  0x400
#define DRIVE_FAST_3mA  0x800
#define DRIVE_FAST_4mA  0xC00
#define DRIVE_SLOW_6mA  0x1000
#define DRIVE_FAST_6mA  0x1400
#define DRIVE_SLOW_10mA 0x1800
#define DRIVE_FAST_10mA 0x1C00

#define SLEEP_SEL       0x200
#define SLEEP_DATA      0x100
#define SLEEP_OE_N      0x80
#define EDGE_CLEAR      0x40
#define EDGE_FALL_EN    0x20
#define EDGE_RISE_EN    0x10

#define AF_SEL_0        0x0     /* Alternate function 0 (reset state) */
#define AF_SEL_1        0x1     /* Alternate function 1 */
#define AF_SEL_2        0x2     /* Alternate function 2 */
#define AF_SEL_3        0x3     /* Alternate function 3 */
#define AF_SEL_4        0x4     /* Alternate function 4 */
#define AF_SEL_5        0x5     /* Alternate function 5 */
#define AF_SEL_6        0x6     /* Alternate function 6 */
#define AF_SEL_7        0x7     /* Alternate function 7 */

#endif /* CONFIG_CPU_MONAHANS */

/* GPIO alternate function assignments */

#define GPIO1_RST               1       /* reset */
#define GPIO6_MMCCLK            6       /* MMC Clock */
#define GPIO8_48MHz             7       /* 48 MHz clock output */
#define GPIO8_MMCCS0            8       /* MMC Chip Select 0 */
#define GPIO9_MMCCS1            9       /* MMC Chip Select 1 */
#define GPIO10_RTCCLK           10      /* real time clock (1 Hz) */
#define GPIO11_3_6MHz           11      /* 3.6 MHz oscillator out */
#define GPIO12_32KHz            12      /* 32 kHz out */
#define GPIO13_MBGNT            13      /* memory controller grant */
#define GPIO14_MBREQ            14      /* alternate bus master request */
#define GPIO15_nCS_1            15      /* chip select 1 */
#define GPIO16_PWM0             16      /* PWM0 output */
#define GPIO17_PWM1             17      /* PWM1 output */
#define GPIO18_RDY              18      /* Ext. Bus Ready */
#define GPIO19_DREQ1            19      /* External DMA Request */
#define GPIO20_DREQ0            20      /* External DMA Request */
#define GPIO23_SCLK             23      /* SSP clock */
#define GPIO24_SFRM             24      /* SSP Frame */
#define GPIO25_STXD             25      /* SSP transmit */
#define GPIO26_SRXD             26      /* SSP receive */
#define GPIO27_SEXTCLK          27      /* SSP ext_clk */
#define GPIO28_BITCLK           28      /* AC97/I2S bit_clk */
#define GPIO29_SDATA_IN         29      /* AC97 Sdata_in0 / I2S Sdata_in */
#define GPIO30_SDATA_OUT        30      /* AC97/I2S Sdata_out */
#define GPIO31_SYNC             31      /* AC97/I2S sync */
#define GPIO32_SDATA_IN1        32      /* AC97 Sdata_in1 */
#define GPIO33_nCS_5            33      /* chip select 5 */
#define GPIO34_FFRXD            34      /* FFUART receive */
#define GPIO34_MMCCS0           34      /* MMC Chip Select 0 */
#define GPIO35_FFCTS            35      /* FFUART Clear to send */
#define GPIO36_FFDCD            36      /* FFUART Data carrier detect */
#define GPIO37_FFDSR            37      /* FFUART data set ready */
#define GPIO38_FFRI             38      /* FFUART Ring Indicator */
#define GPIO39_MMCCS1           39      /* MMC Chip Select 1 */
#define GPIO39_FFTXD            39      /* FFUART transmit data */
#define GPIO40_FFDTR            40      /* FFUART data terminal Ready */
#define GPIO41_FFRTS            41      /* FFUART request to send */
#define GPIO42_BTRXD            42      /* BTUART receive data */
#define GPIO43_BTTXD            43      /* BTUART transmit data */
#define GPIO44_BTCTS            44      /* BTUART clear to send */
#define GPIO45_BTRTS            45      /* BTUART request to send */
#define GPIO46_ICPRXD           46      /* ICP receive data */
#define GPIO46_STRXD            46      /* STD_UART receive data */
#define GPIO47_ICPTXD           47      /* ICP transmit data */
#define GPIO47_STTXD            47      /* STD_UART transmit data */
#define GPIO48_nPOE             48      /* Output Enable for Card Space */
#define GPIO49_nPWE             49      /* Write Enable for Card Space */
#define GPIO50_nPIOR            50      /* I/O Read for Card Space */
#define GPIO51_nPIOW            51      /* I/O Write for Card Space */
#define GPIO52_nPCE_1           52      /* Card Enable for Card Space */
#define GPIO53_nPCE_2           53      /* Card Enable for Card Space */
#define GPIO53_MMCCLK           53      /* MMC Clock */
#define GPIO54_MMCCLK           54      /* MMC Clock */
#define GPIO54_pSKTSEL          54      /* Socket Select for Card Space */
#define GPIO55_nPREG            55      /* Card Address bit 26 */
#define GPIO56_nPWAIT           56      /* Wait signal for Card Space */
#define GPIO57_nIOIS16          57      /* Bus Width select for I/O Card Space */
#define GPIO58_LDD_0            58      /* LCD data pin 0 */
#define GPIO59_LDD_1            59      /* LCD data pin 1 */
#define GPIO60_LDD_2            60      /* LCD data pin 2 */
#define GPIO61_LDD_3            61      /* LCD data pin 3 */
#define GPIO62_LDD_4            62      /* LCD data pin 4 */
#define GPIO63_LDD_5            63      /* LCD data pin 5 */
#define GPIO64_LDD_6            64      /* LCD data pin 6 */
#define GPIO65_LDD_7            65      /* LCD data pin 7 */
#define GPIO66_LDD_8            66      /* LCD data pin 8 */
#define GPIO66_MBREQ            66      /* alternate bus master req */
#define GPIO67_LDD_9            67      /* LCD data pin 9 */
#define GPIO67_MMCCS0           67      /* MMC Chip Select 0 */
#define GPIO68_LDD_10           68      /* LCD data pin 10 */
#define GPIO68_MMCCS1           68      /* MMC Chip Select 1 */
#define GPIO69_LDD_11           69      /* LCD data pin 11 */
#define GPIO69_MMCCLK           69      /* MMC_CLK */
#define GPIO70_LDD_12           70      /* LCD data pin 12 */
#define GPIO70_RTCCLK           70      /* Real Time clock (1 Hz) */
#define GPIO71_LDD_13           71      /* LCD data pin 13 */
#define GPIO71_3_6MHz           71      /* 3.6 MHz Oscillator clock */
#define GPIO72_LDD_14           72      /* LCD data pin 14 */
#define GPIO72_32kHz            72      /* 32 kHz clock */
#define GPIO73_LDD_15           73      /* LCD data pin 15 */
#define GPIO73_MBGNT            73      /* Memory controller grant */
#define GPIO74_LCD_FCLK         74      /* LCD Frame clock */
#define GPIO75_LCD_LCLK         75      /* LCD line clock */
#define GPIO76_LCD_PCLK         76      /* LCD Pixel clock */
#define GPIO77_LCD_ACBIAS       77      /* LCD AC Bias */
#define GPIO78_nCS_2            78      /* chip select 2 */
#define GPIO79_nCS_3            79      /* chip select 3 */
#define GPIO80_nCS_4            80      /* chip select 4 */

/* GPIO alternate function mode & direction */

#define GPIO_IN                 0x000
#define GPIO_OUT                0x080
#define GPIO_ALT_FN_1_IN        0x100
#define GPIO_ALT_FN_1_OUT       0x180
#define GPIO_ALT_FN_2_IN        0x200
#define GPIO_ALT_FN_2_OUT       0x280
#define GPIO_ALT_FN_3_IN        0x300
#define GPIO_ALT_FN_3_OUT       0x380
#define GPIO_MD_MASK_NR         0x07f
#define GPIO_MD_MASK_DIR        0x080
#define GPIO_MD_MASK_FN         0x300

#define GPIO1_RTS_MD            ( 1 | GPIO_ALT_FN_1_IN)
#define GPIO6_MMCCLK_MD         ( 6 | GPIO_ALT_FN_1_OUT)
#define GPIO8_48MHz_MD          ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO8_MMCCS0_MD         ( 8 | GPIO_ALT_FN_1_OUT)
#define GPIO9_MMCCS1_MD         ( 9 | GPIO_ALT_FN_1_OUT)
#define GPIO10_RTCCLK_MD        (10 | GPIO_ALT_FN_1_OUT)
#define GPIO11_3_6MHz_MD        (11 | GPIO_ALT_FN_1_OUT)
#define GPIO12_32KHz_MD         (12 | GPIO_ALT_FN_1_OUT)
#define GPIO13_MBGNT_MD         (13 | GPIO_ALT_FN_2_OUT)
#define GPIO14_MBREQ_MD         (14 | GPIO_ALT_FN_1_IN)
#define GPIO15_nCS_1_MD         (15 | GPIO_ALT_FN_2_OUT)
#define GPIO16_PWM0_MD          (16 | GPIO_ALT_FN_2_OUT)
#define GPIO17_PWM1_MD          (17 | GPIO_ALT_FN_2_OUT)
#define GPIO18_RDY_MD           (18 | GPIO_ALT_FN_1_IN)
#define GPIO19_DREQ1_MD         (19 | GPIO_ALT_FN_1_IN)
#define GPIO20_DREQ0_MD         (20 | GPIO_ALT_FN_1_IN)
#define GPIO23_SCLK_md          (23 | GPIO_ALT_FN_2_OUT)
#define GPIO24_SFRM_MD          (24 | GPIO_ALT_FN_2_OUT)
#define GPIO25_STXD_MD          (25 | GPIO_ALT_FN_2_OUT)
#define GPIO26_SRXD_MD          (26 | GPIO_ALT_FN_1_IN)
#define GPIO27_SEXTCLK_MD       (27 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_AC97_MD   (28 | GPIO_ALT_FN_1_IN)
#define GPIO28_BITCLK_I2S_MD    (28 | GPIO_ALT_FN_2_IN)
#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN)
#define GPIO29_SDATA_IN_I2S_MD  (29 | GPIO_ALT_FN_2_IN)
#define GPIO30_SDATA_OUT_AC97_MD        (30 | GPIO_ALT_FN_2_OUT)
#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT)
#define GPIO31_SYNC_AC97_MD     (31 | GPIO_ALT_FN_2_OUT)
#define GPIO31_SYNC_I2S_MD      (31 | GPIO_ALT_FN_1_OUT)
#define GPIO32_SDATA_IN1_AC97_MD        (32 | GPIO_ALT_FN_1_IN)
#define GPIO33_nCS_5_MD         (33 | GPIO_ALT_FN_2_OUT)
#define GPIO34_FFRXD_MD         (34 | GPIO_ALT_FN_1_IN)
#define GPIO34_MMCCS0_MD        (34 | GPIO_ALT_FN_2_OUT)
#define GPIO35_FFCTS_MD         (35 | GPIO_ALT_FN_1_IN)
#define GPIO36_FFDCD_MD         (36 | GPIO_ALT_FN_1_IN)
#define GPIO37_FFDSR_MD         (37 | GPIO_ALT_FN_1_IN)
#define GPIO38_FFRI_MD          (38 | GPIO_ALT_FN_1_IN)
#define GPIO39_MMCCS1_MD        (39 | GPIO_ALT_FN_1_OUT)
#define GPIO39_FFTXD_MD         (39 | GPIO_ALT_FN_2_OUT)
#define GPIO40_FFDTR_MD         (40 | GPIO_ALT_FN_2_OUT)
#define GPIO41_FFRTS_MD         (41 | GPIO_ALT_FN_2_OUT)
#define GPIO42_BTRXD_MD         (42 | GPIO_ALT_FN_1_IN)
#define GPIO43_BTTXD_MD         (43 | GPIO_ALT_FN_2_OUT)
#define GPIO44_BTCTS_MD         (44 | GPIO_ALT_FN_1_IN)
#define GPIO45_BTRTS_MD         (45 | GPIO_ALT_FN_2_OUT)
#define GPIO46_ICPRXD_MD        (46 | GPIO_ALT_FN_1_IN)
#define GPIO46_STRXD_MD         (46 | GPIO_ALT_FN_2_IN)
#define GPIO47_ICPTXD_MD        (47 | GPIO_ALT_FN_2_OUT)
#define GPIO47_STTXD_MD         (47 | GPIO_ALT_FN_1_OUT)
#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
#define GPIO49_nPWE_MD          (49 | GPIO_ALT_FN_2_OUT)
#define GPIO50_nPIOR_MD         (50 | GPIO_ALT_FN_2_OUT)
#define GPIO51_nPIOW_MD         (51 | GPIO_ALT_FN_2_OUT)
#define GPIO52_nPCE_1_MD        (52 | GPIO_ALT_FN_2_OUT)
#define GPIO53_nPCE_2_MD        (53 | GPIO_ALT_FN_2_OUT)
#define GPIO53_MMCCLK_MD        (53 | GPIO_ALT_FN_1_OUT)
#define GPIO54_MMCCLK_MD        (54 | GPIO_ALT_FN_1_OUT)
#define GPIO54_pSKTSEL_MD       (54 | GPIO_ALT_FN_2_OUT)
#define GPIO55_nPREG_MD         (55 | GPIO_ALT_FN_2_OUT)
#define GPIO56_nPWAIT_MD        (56 | GPIO_ALT_FN_1_IN)
#define GPIO57_nIOIS16_MD       (57 | GPIO_ALT_FN_1_IN)
#define GPIO58_LDD_0_MD         (58 | GPIO_ALT_FN_2_OUT)
#define GPIO59_LDD_1_MD         (59 | GPIO_ALT_FN_2_OUT)
#define GPIO60_LDD_2_MD         (60 | GPIO_ALT_FN_2_OUT)
#define GPIO61_LDD_3_MD         (61 | GPIO_ALT_FN_2_OUT)
#define GPIO62_LDD_4_MD         (62 | GPIO_ALT_FN_2_OUT)
#define GPIO63_LDD_5_MD         (63 | GPIO_ALT_FN_2_OUT)
#define GPIO64_LDD_6_MD         (64 | GPIO_ALT_FN_2_OUT)
#define GPIO65_LDD_7_MD         (65 | GPIO_ALT_FN_2_OUT)
#define GPIO66_LDD_8_MD         (66 | GPIO_ALT_FN_2_OUT)
#define GPIO66_MBREQ_MD         (66 | GPIO_ALT_FN_1_IN)
#define GPIO67_LDD_9_MD         (67 | GPIO_ALT_FN_2_OUT)
#define GPIO67_MMCCS0_MD        (67 | GPIO_ALT_FN_1_OUT)
#define GPIO68_LDD_10_MD        (68 | GPIO_ALT_FN_2_OUT)
#define GPIO68_MMCCS1_MD        (68 | GPIO_ALT_FN_1_OUT)
#define GPIO69_LDD_11_MD        (69 | GPIO_ALT_FN_2_OUT)
#define GPIO69_MMCCLK_MD        (69 | GPIO_ALT_FN_1_OUT)
#define GPIO70_LDD_12_MD        (70 | GPIO_ALT_FN_2_OUT)
#define GPIO70_RTCCLK_MD        (70 | GPIO_ALT_FN_1_OUT)
#define GPIO71_LDD_13_MD        (71 | GPIO_ALT_FN_2_OUT)
#define GPIO71_3_6MHz_MD        (71 | GPIO_ALT_FN_1_OUT)
#define GPIO72_LDD_14_MD        (72 | GPIO_ALT_FN_2_OUT)
#define GPIO72_32kHz_MD         (72 | GPIO_ALT_FN_1_OUT)
#define GPIO73_LDD_15_MD        (73 | GPIO_ALT_FN_2_OUT)
#define GPIO73_MBGNT_MD         (73 | GPIO_ALT_FN_1_OUT)
#define GPIO74_LCD_FCLK_MD      (74 | GPIO_ALT_FN_2_OUT)
#define GPIO75_LCD_LCLK_MD      (75 | GPIO_ALT_FN_2_OUT)
#define GPIO76_LCD_PCLK_MD      (76 | GPIO_ALT_FN_2_OUT)
#define GPIO77_LCD_ACBIAS_MD    (77 | GPIO_ALT_FN_2_OUT)
#define GPIO78_nCS_2_MD         (78 | GPIO_ALT_FN_2_OUT)
#define GPIO79_nCS_3_MD         (79 | GPIO_ALT_FN_2_OUT)
#define GPIO80_nCS_4_MD         (80 | GPIO_ALT_FN_2_OUT)

#define GPIO117_SCL             (117 | GPIO_ALT_FN_1_OUT)
#define GPIO118_SDA             (118 | GPIO_ALT_FN_1_OUT)

/*
 * Power Manager
 */
#ifdef CONFIG_CPU_MONAHANS

#define ASCR            0x40F40000  /* Application Subsystem Power Status/Control Register */
#define ARSR            0x40F40004  /* Application Subsystem Reset Status Register */
#define AD3ER           0x40F40008  /* Application Subsystem D3 state Wakeup Enable Register */
#define AD3SR           0x40F4000C  /* Application Subsystem D3 state Wakeup Status Register */
#define AD2D0ER         0x40F40010  /* Application Subsystem D2 to D0 state Wakeup Enable Register */
#define AD2D0SR         0x40F40014  /* Application Subsystem D2 to D0 state Wakeup Status Register */
#define AD2D1ER         0x40F40018  /* Application Subsystem D2 to D1 state Wakeup Enable Register */
#define AD2D1SR         0x40F4001C  /* Application Subsystem D2 to D1 state Wakeup Status Register */
#define AD1D0ER         0x40F40020  /* Application Subsystem D1 to D0 state Wakeup Enable Register */
#define AD1D0SR         0x40F40024  /* Application Subsystem D1 to D0 state Wakeup Status Register */
#define ASDCNT          0x40F40028  /* Application Subsystem SRAM Drowsy Count Register */
#define AD3R            0x40F40030  /* Application Subsystem D3 State Configuration Register */
#define AD2R            0x40F40034  /* Application Subsystem D2 State Configuration Register */
#define AD1R            0x40F40038  /* Application Subsystem D1 State Configuration Register */

#define PMCR            0x40F50000  /* Power Manager Control Register */
#define PSR             0x40F50004  /* Power Manager S2 Status Register */
#define PSPR            0x40F50008  /* Power Manager Scratch Pad Register */
#define PCFR            0x40F5000C  /* Power Manager General Configuration Register */
#define PWER            0x40F50010  /* Power Manager Wake-up Enable Register */
#define PWSR            0x40F50014  /* Power Manager Wake-up Status Register */
#define PECR            0x40F50018  /* Power Manager EXT_WAKEUP[1:0] Control Register */
#define DCDCSR          0x40F50080  /* DC-DC Controller Status Register */
#define PVCR            0x40F50100  /* Power Manager Voltage Change Control Register */
#define    PCMD(x) (0x40F50110 + x*4)
#define    PCMD0   (0x40F50110 + 0 * 4)
#define    PCMD1   (0x40F50110 + 1 * 4)
#define    PCMD2   (0x40F50110 + 2 * 4)
#define    PCMD3   (0x40F50110 + 3 * 4)
#define    PCMD4   (0x40F50110 + 4 * 4)
#define    PCMD5   (0x40F50110 + 5 * 4)
#define    PCMD6   (0x40F50110 + 6 * 4)
#define    PCMD7   (0x40F50110 + 7 * 4)
#define    PCMD8   (0x40F50110 + 8 * 4)
#define    PCMD9   (0x40F50110 + 9 * 4)
#define    PCMD10  (0x40F50110 + 10 * 4)
#define    PCMD11  (0x40F50110 + 11 * 4)
#define    PCMD12  (0x40F50110 + 12 * 4)
#define    PCMD13  (0x40F50110 + 13 * 4)
#define    PCMD14  (0x40F50110 + 14 * 4)
#define    PCMD15  (0x40F50110 + 15 * 4)
#define    PCMD16  (0x40F50110 + 16 * 4)
#define    PCMD17  (0x40F50110 + 17 * 4)
#define    PCMD18  (0x40F50110 + 18 * 4)
#define    PCMD19  (0x40F50110 + 19 * 4)
#define    PCMD20  (0x40F50110 + 20 * 4)
#define    PCMD21  (0x40F50110 + 21 * 4)
#define    PCMD22  (0x40F50110 + 22 * 4)
#define    PCMD23  (0x40F50110 + 23 * 4)
#define    PCMD24  (0x40F50110 + 24 * 4)
#define    PCMD25  (0x40F50110 + 25 * 4)
#define    PCMD26  (0x40F50110 + 26 * 4)
#define    PCMD27  (0x40F50110 + 27 * 4)
#define    PCMD28  (0x40F50110 + 28 * 4)
#define    PCMD29  (0x40F50110 + 29 * 4)
#define    PCMD30  (0x40F50110 + 30 * 4)
#define    PCMD31  (0x40F50110 + 31 * 4)

#define    PCMD_MBC    (1<<12)
#define    PCMD_DCE    (1<<11)
#define    PCMD_LC     (1<<10)
#define    PCMD_SQC    (3<<8)  /* only 00 and 01 are valid */

#define PVCR_FVC                   (0x1 << 28)
#define PVCR_VCSA                  (0x1<<14)
#define PVCR_CommandDelay          (0xf80)
#define PVCR_ReadPointer           0x01f00000
#define PVCR_SlaveAddress          (0x7f)

#else /* ifdef CONFIG_CPU_MONAHANS */

#define PMCR            0x40F00000  /* Power Manager Control Register */
#define PSSR            0x40F00004  /* Power Manager Sleep Status Register */
#define PSPR            0x40F00008  /* Power Manager Scratch Pad Register */
#define PWER            0x40F0000C  /* Power Manager Wake-up Enable Register */
#define PRER            0x40F00010  /* Power Manager GPIO Rising-Edge Detect Enable Register */
#define PFER            0x40F00014  /* Power Manager GPIO Falling-Edge Detect Enable Register */
#define PEDR            0x40F00018  /* Power Manager GPIO Edge Detect Status Register */
#define PCFR            0x40F0001C  /* Power Manager General Configuration Register */
#define PGSR0           0x40F00020  /* Power Manager GPIO Sleep State Register for GP[31-0] */
#define PGSR1           0x40F00024  /* Power Manager GPIO Sleep State Register for GP[63-32] */
#define PGSR2           0x40F00028  /* Power Manager GPIO Sleep State Register for GP[84-64] */
#define PGSR3           0x40F0002C  /* Power Manager GPIO Sleep State Register for GP[118-96] */
#define RCSR            0x40F00030  /* Reset Controller Status Register */

#define    PSLR    0x40F00034   /* Power Manager Sleep Config Register */
#define    PSTR    0x40F00038   /* Power Manager Standby Config Register */
#define    PSNR    0x40F0003C   /* Power Manager Sense Config Register */
#define    PVCR    0x40F00040   /* Power Manager VoltageControl Register */
#define    PKWR    0x40F00050   /* Power Manager KB Wake-up Enable Reg */
#define    PKSR    0x40F00054   /* Power Manager KB Level-Detect Register */
#define    PCMD(x) (0x40F00080 + x*4)
#define    PCMD0   (0x40F00080 + 0 * 4)
#define    PCMD1   (0x40F00080 + 1 * 4)
#define    PCMD2   (0x40F00080 + 2 * 4)
#define    PCMD3   (0x40F00080 + 3 * 4)
#define    PCMD4   (0x40F00080 + 4 * 4)
#define    PCMD5   (0x40F00080 + 5 * 4)
#define    PCMD6   (0x40F00080 + 6 * 4)
#define    PCMD7   (0x40F00080 + 7 * 4)
#define    PCMD8   (0x40F00080 + 8 * 4)
#define    PCMD9   (0x40F00080 + 9 * 4)
#define    PCMD10  (0x40F00080 + 10 * 4)
#define    PCMD11  (0x40F00080 + 11 * 4)
#define    PCMD12  (0x40F00080 + 12 * 4)
#define    PCMD13  (0x40F00080 + 13 * 4)
#define    PCMD14  (0x40F00080 + 14 * 4)
#define    PCMD15  (0x40F00080 + 15 * 4)
#define    PCMD16  (0x40F00080 + 16 * 4)
#define    PCMD17  (0x40F00080 + 17 * 4)
#define    PCMD18  (0x40F00080 + 18 * 4)
#define    PCMD19  (0x40F00080 + 19 * 4)
#define    PCMD20  (0x40F00080 + 20 * 4)
#define    PCMD21  (0x40F00080 + 21 * 4)
#define    PCMD22  (0x40F00080 + 22 * 4)
#define    PCMD23  (0x40F00080 + 23 * 4)
#define    PCMD24  (0x40F00080 + 24 * 4)
#define    PCMD25  (0x40F00080 + 25 * 4)
#define    PCMD26  (0x40F00080 + 26 * 4)
#define    PCMD27  (0x40F00080 + 27 * 4)
#define    PCMD28  (0x40F00080 + 28 * 4)
#define    PCMD29  (0x40F00080 + 29 * 4)
#define    PCMD30  (0x40F00080 + 30 * 4)
#define    PCMD31  (0x40F00080 + 31 * 4)

#define    PCMD_MBC    (1<<12)
#define    PCMD_DCE    (1<<11)
#define    PCMD_LC     (1<<10)
/* FIXME:  PCMD_SQC need be checked.   */
#define    PCMD_SQC    (3<<8)  /* currently only bit 8 is changerable, */
                                /* bit 9 should be 0 all day. */
#define PVCR_VCSA                  (0x1<<14)
#define PVCR_CommandDelay          (0xf80)
/* define MACRO for Power Manager General Configuration Register (PCFR) */
#define PCFR_FVC                   (0x1 << 10)
#define PCFR_PI2C_EN               (0x1 << 6)

#define PSSR_OTGPH      (1 << 6)        /* OTG Peripheral control Hold */
#define PSSR_RDH        (1 << 5)        /* Read Disable Hold */
#define PSSR_PH         (1 << 4)        /* Peripheral Control Hold */
#define PSSR_VFS        (1 << 2)        /* VDD Fault Status */
#define PSSR_BFS        (1 << 1)        /* Battery Fault Status */
#define PSSR_SSS        (1 << 0)        /* Software Sleep Status */

#define PCFR_DS         (1 << 3)        /* Deep Sleep Mode */
#define PCFR_FS         (1 << 2)        /* Float Static Chip Selects */
#define PCFR_FP         (1 << 1)        /* Float PCMCIA controls */
#define PCFR_OPDE       (1 << 0)        /* 3.6864 MHz oscillator power-down enable */

#define RCSR_GPR        (1 << 3)        /* GPIO Reset */
#define RCSR_SMR        (1 << 2)        /* Sleep Mode */
#define RCSR_WDR        (1 << 1)        /* Watchdog Reset */
#define RCSR_HWR        (1 << 0)        /* Hardware Reset */

#endif /* CONFIG_CPU_MONAHANS */

/*
 * SSP Serial Port Registers
 */
#define SSCR0           0x41000000  /* SSP Control Register 0 */
#define SSCR1           0x41000004  /* SSP Control Register 1 */
#define SSSR            0x41000008  /* SSP Status Register */
#define SSITR           0x4100000C  /* SSP Interrupt Test Register */
#define SSDR            0x41000010  /* (Write / Read) SSP Data Write Register/SSP Data Read Register */

/*
 * MultiMediaCard (MMC) controller
 */
#define MMC_STRPCL      0x41100000  /* Control to start and stop MMC clock */
#define MMC_STAT        0x41100004  /* MMC Status Register (read only) */
#define MMC_CLKRT       0x41100008  /* MMC clock rate */
#define MMC_SPI         0x4110000c  /* SPI mode control bits */
#define MMC_CMDAT       0x41100010  /* Command/response/data sequence control */
#define MMC_RESTO       0x41100014  /* Expected response time out */
#define MMC_RDTO        0x41100018  /* Expected data read time out */
#define MMC_BLKLEN      0x4110001c  /* Block length of data transaction */
#define MMC_NOB         0x41100020  /* Number of blocks, for block mode */
#define MMC_PRTBUF      0x41100024  /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK      0x41100028  /* Interrupt Mask */
#define MMC_I_REG       0x4110002c  /* Interrupt Register (read only) */
#define MMC_CMD         0x41100030  /* Index of current command */
#define MMC_ARGH        0x41100034  /* MSW part of the current command argument */
#define MMC_ARGL        0x41100038  /* LSW part of the current command argument */
#define MMC_RES         0x4110003c  /* Response FIFO (read only) */
#define MMC_RXFIFO      0x41100040  /* Receive FIFO (read only) */
#define MMC_TXFIFO      0x41100044  /* Transmit FIFO (write only) */


/*
 * LCD
 */
#define LCCR0           0x44000000  /* LCD Controller Control Register 0 */
#define LCCR1           0x44000004  /* LCD Controller Control Register 1 */
#define LCCR2           0x44000008  /* LCD Controller Control Register 2 */
#define LCCR3           0x4400000C  /* LCD Controller Control Register 3 */
#define DFBR0           0x44000020  /* DMA Channel 0 Frame Branch Register */
#define DFBR1           0x44000024  /* DMA Channel 1 Frame Branch Register */
#define LCSR0           0x44000038  /* LCD Controller Status Register */
#define LCSR1           0x44000034  /* LCD Controller Status Register */
#define LIIDR           0x4400003C  /* LCD Controller Interrupt ID Register */
#define TMEDRGBR        0x44000040  /* TMED RGB Seed Register */
#define TMEDCR          0x44000044  /* TMED Control Register */

#define FDADR0          0x44000200  /* DMA Channel 0 Frame Descriptor Address Register */
#define FSADR0          0x44000204  /* DMA Channel 0 Frame Source Address Register */
#define FIDR0           0x44000208  /* DMA Channel 0 Frame ID Register */
#define LDCMD0          0x4400020C  /* DMA Channel 0 Command Register */
#define FDADR1          0x44000210  /* DMA Channel 1 Frame Descriptor Address Register */
#define FSADR1          0x44000214  /* DMA Channel 1 Frame Source Address Register */
#define FIDR1           0x44000218  /* DMA Channel 1 Frame ID Register */
#define LDCMD1          0x4400021C  /* DMA Channel 1 Command Register */

#define LCCR0_ENB       (1 << 0)        /* LCD Controller enable */
#define LCCR0_CMS       (1 << 1)        /* Color = 0, Monochrome = 1 */
#define LCCR0_SDS       (1 << 2)        /* Single Panel = 0, Dual Panel = 1 */
#define LCCR0_LDM       (1 << 3)        /* LCD Disable Done Mask */
#define LCCR0_SFM       (1 << 4)        /* Start of frame mask */
#define LCCR0_IUM       (1 << 5)        /* Input FIFO underrun mask */
#define LCCR0_EFM       (1 << 6)        /* End of Frame mask */
#define LCCR0_PAS       (1 << 7)        /* Passive = 0, Active = 1 */
#define LCCR0_BLE       (1 << 8)        /* Little Endian = 0, Big Endian = 1 */
#define LCCR0_DPD       (1 << 9)        /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */
#define LCCR0_DIS       (1 << 10)       /* LCD Disable */
#define LCCR0_QDM       (1 << 11)       /* LCD Quick Disable mask */
#define LCCR0_PDD       (0xff << 12)    /* Palette DMA request delay */
#define LCCR0_PDD_S     12
#define LCCR0_BM        (1 << 20)       /* Branch mask */
#define LCCR0_OUM       (1 << 21)       /* Output FIFO underrun mask */
#if defined(CONFIG_PXA27X)
#define LCCR0_LCDT      (1 << 22)       /* LCD Panel Type */
#define LCCR0_RDSTM     (1 << 23)       /* Read Status Interrupt Mask */
#define LCCR0_CMDIM     (1 << 24)       /* Command Interrupt Mask */
#endif

#define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
#define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
                        (((Pixel) - 1) << FShft (LCCR1_PPL))

#define LCCR1_HSW       Fld (6, 10)     /* Horizontal Synchronization     */
#define LCCR1_HorSnchWdth(Tpix)         /* Horizontal Synchronization     */ \
                                        /* pulse Width [1..64 Tpix]       */ \
                        (((Tpix) - 1) << FShft (LCCR1_HSW))

#define LCCR1_ELW       Fld (8, 16)     /* End-of-Line pixel clock Wait    */
                                        /* count - 1 [Tpix]                */
#define LCCR1_EndLnDel(Tpix)            /*  End-of-Line Delay              */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_ELW))

#define LCCR1_BLW       Fld (8, 24)     /* Beginning-of-Line pixel clock   */
                                        /* Wait count - 1 [Tpix]           */
#define LCCR1_BegLnDel(Tpix)            /*  Beginning-of-Line Delay        */ \
                                        /*  [1..256 Tpix]                  */ \
                        (((Tpix) - 1) << FShft (LCCR1_BLW))


#define LCCR2_LPP       Fld (10, 0)     /* Line Per Panel - 1              */
#define LCCR2_DisHght(Line)             /*  Display Height [1..1024 lines] */ \
                        (((Line) - 1) << FShft (LCCR2_LPP))

#define LCCR2_VSW       Fld (6, 10)     /* Vertical Synchronization pulse  */
                                        /* Width - 1 [Tln] (L_FCLK)        */
#define LCCR2_VrtSnchWdth(Tln)          /*  Vertical Synchronization pulse */ \
                                        /*  Width [1..64 Tln]              */ \
                        (((Tln) - 1) << FShft (LCCR2_VSW))

#define LCCR2_EFW       Fld (8, 16)     /* End-of-Frame line clock Wait    */
                                        /* count [Tln]                     */
#define LCCR2_EndFrmDel(Tln)            /*  End-of-Frame Delay             */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_EFW))

#define LCCR2_BFW       Fld (8, 24)     /* Beginning-of-Frame line clock   */
                                        /* Wait count [Tln]                */
#define LCCR2_BegFrmDel(Tln)            /*  Beginning-of-Frame Delay       */ \
                                        /*  [0..255 Tln]                   */ \
                        ((Tln) << FShft (LCCR2_BFW))

#define LCCR3_API       (0xf << 16)     /* AC Bias pin trasitions per interrupt */
#define LCCR3_API_S     16
#define LCCR3_VSP       (1 << 20)       /* vertical sync polarity */
#define LCCR3_HSP       (1 << 21)       /* horizontal sync polarity */
#define LCCR3_PCP       (1 << 22)       /* pixel clock polarity */
#define LCCR3_OEP       (1 << 23)       /* output enable polarity */
#define LCCR3_DPC       (1 << 27)       /* double pixel clock mode */

#define LCCR3_PDFOR_0    (0 << 30)
#define LCCR3_PDFOR_1    (1 << 30)
#define LCCR3_PDFOR_2    (2 << 30)
#define LCCR3_PDFOR_3    (3 << 30)


#define LCCR3_PCD       Fld (8, 0)      /* Pixel Clock Divisor */
#define LCCR3_PixClkDiv(Div)            /* Pixel Clock Divisor */ \
                        (((Div) << FShft (LCCR3_PCD)))


#define LCCR3_BPP       Fld (3, 24)     /* Bit Per Pixel */
#define LCCR3_Bpp(Bpp)                  /* Bit Per Pixel */ \
                        ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26)))

#define LCCR3_ACB       Fld (8, 8)      /* AC Bias */
#define LCCR3_Acb(Acb)                  /* BAC Bias */ \
                        (((Acb) << FShft (LCCR3_ACB)))

#define LCCR3_HorSnchH  (LCCR3_HSP*0)   /*  Horizontal Synchronization     */
                                        /*  pulse active High              */
#define LCCR3_HorSnchL  (LCCR3_HSP*1)   /*  Horizontal Synchronization     */

#define LCCR3_VrtSnchH  (LCCR3_VSP*0)   /*  Vertical Synchronization pulse */
                                        /*  active High                    */
#define LCCR3_VrtSnchL  (LCCR3_VSP*1)   /*  Vertical Synchronization pulse */
                                        /*  active Low                     */

#define LCSR0_LDD       (1 << 0)        /* LCD Disable Done */
#define LCSR0_SOF       (1 << 1)        /* Start of frame */
#define LCSR0_BER       (1 << 2)        /* Bus error */
#define LCSR0_ABC       (1 << 3)        /* AC Bias count */
#define LCSR0_IUL       (1 << 4)        /* input FIFO underrun Lower panel */
#define LCSR0_IUU       (1 << 5)        /* input FIFO underrun Upper panel */
#define LCSR0_OU        (1 << 6)        /* output FIFO underrun */
#define LCSR0_QD        (1 << 7)        /* quick disable */
#define LCSR0_EOF0      (1 << 8)        /* end of frame */
#define LCSR0_BS        (1 << 9)        /* branch status */
#define LCSR0_SINT      (1 << 10)       /* subsequent interrupt */

#define LCSR1_SOF1      (1 << 0)
#define LCSR1_SOF2      (1 << 1)
#define LCSR1_SOF3      (1 << 2)
#define LCSR1_SOF4      (1 << 3)
#define LCSR1_SOF5      (1 << 4)
#define LCSR1_SOF6      (1 << 5)

#define LCSR1_EOF1      (1 << 8)
#define LCSR1_EOF2      (1 << 9)
#define LCSR1_EOF3      (1 << 10)
#define LCSR1_EOF4      (1 << 11)
#define LCSR1_EOF5      (1 << 12)
#define LCSR1_EOF6      (1 << 13)

#define LCSR1_BS1       (1 << 16)
#define LCSR1_BS2       (1 << 17)
#define LCSR1_BS3       (1 << 18)
#define LCSR1_BS4       (1 << 19)
#define LCSR1_BS5       (1 << 20)
#define LCSR1_BS6       (1 << 21)

#define LCSR1_IU2       (1 << 25)
#define LCSR1_IU3       (1 << 26)
#define LCSR1_IU4       (1 << 27)
#define LCSR1_IU5       (1 << 28)
#define LCSR1_IU6       (1 << 29)

#define LDCMD_PAL       (1 << 26)       /* instructs DMA to load palette buffer */
#if defined(CONFIG_PXA27X)
#define LDCMD_SOFINT    (1 << 22)
#define LDCMD_EOFINT    (1 << 21)
#endif

/*
 * Memory controller
 */

#ifdef CONFIG_CPU_MONAHANS

/* PXA3xx */

/* Static Memory Controller Registers */
#define MSC0            0x4A000008 /* Static Memory Control Register 0 */
#define MSC1            0x4A00000C /* Static Memory Control Register 1 */
#define MECR            0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXCNFG          0x4A00001C /* Synchronous Static Memory Control Register */
#define MCMEM0          0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */
#define MCATT0          0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCIO0           0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */
#define MEMCLKCFG       0x4A000068 /* SCLK speed configuration */
#define CSADRCFG0       0x4A000080 /* Address Configuration for chip select 0 */
#define CSADRCFG1       0x4A000084 /* Address Configuration for chip select 1 */
#define CSADRCFG2       0x4A000088 /* Address Configuration for chip select 2 */
#define CSADRCFG3       0x4A00008C /* Address Configuration for chip select 3 */
#define CSADRCFG_P      0x4A000090 /* Address Configuration for pcmcia card interface */
#define CSMSADRCFG      0x4A0000A0 /* Master Address Configuration Register */
#define CLK_RET_DEL     0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */
#define ADV_RET_DEL     0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */

/* Dynamic Memory Controller Registers */
#define MDCNFG          0x48100000 /* SDRAM Configuration Register 0 */
#define MDREFR          0x48100004 /* SDRAM Refresh Control Register */
#define FLYCNFG         0x48100020 /* Fly-by DMA DVAL[1:0] polarities */
#define MDMRS           0x48100040 /* MRS value to be written to SDRAM */
#define DDR_SCAL        0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_HCAL        0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */
#define DDR_WCAL        0x48100068 /* DDR Write Strobe Calibration Register */
#define DMCIER          0x48100070 /* Dynamic MC Interrupt Enable Register. */
#define DMCISR          0x48100078 /* Dynamic MC Interrupt Status Register. */
#define DDR_DLS         0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */
#define EMPI            0x48100090 /* EMPI Control Register */
#define RCOMP           0x48100100
#define PAD_MA          0x48100110
#define PAD_MDMSB       0x48100114
#define PAD_MDLSB       0x48100118
#define PAD_DMEM        0x4810011c
#define PAD_SDCLK       0x48100120
#define PAD_SDCS        0x48100124
#define PAD_SMEM        0x48100128
#define PAD_SCLK        0x4810012C
#define TAI             0x48100F00 /* TAI Tavor Address Isolation Register */

/* Some frequently used bits */
#define MDCNFG_DMAP     0x80000000      /* SDRAM 1GB Memory Map Enable */
#define MDCNFG_DMCEN    0x40000000      /* Enable Dynamic Memory Controller */
#define MDCNFG_HWFREQ   0x20000000      /* Hardware Frequency Change Calibration */
#define MDCNFG_DTYPE    0x400           /* SDRAM Type: 1=DDR SDRAM */

#define MDCNFG_DTC_0    0x0             /* Timing Category of SDRAM */
#define MDCNFG_DTC_1    0x100
#define MDCNFG_DTC_2    0x200
#define MDCNFG_DTC_3    0x300

#define MDCNFG_DRAC_12  0x0             /* Number of Row Access Bits */
#define MDCNFG_DRAC_13  0x20
#define MDCNFG_DRAC_14  0x40

#define MDCNFG_DCAC_9   0x0             /* Number of Column Acess Bits */
#define MDCNFG_DCAC_10  0x08
#define MDCNFG_DCAC_11  0x10

#define MDCNFG_DBW_16   0x4             /* SDRAM Data Bus width 16bit */
#define MDCNFG_DCSE1    0x2             /* SDRAM CS 1 Enable */
#define MDCNFG_DCSE0    0x1             /* SDRAM CS 0 Enable */


/* Data Flash Controller Registers */

#define NDCR            0x43100000  /* Data Flash Control register */
#define NDTR0CS0        0x43100004  /* Data Controller Timing Parameter 0 Register for ND_nCS0 */
/* #define NDTR0CS1     0x43100008  /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */
#define NDTR1CS0        0x4310000C  /* Data Controller Timing Parameter 1 Register for ND_nCS0 */
/* #define NDTR1CS1     0x43100010  /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */
#define NDSR            0x43100014  /* Data Controller Status Register */
#define NDPCR           0x43100018  /* Data Controller Page Count Register */
#define NDBDR0          0x4310001C  /* Data Controller Bad Block Register 0 */
#define NDBDR1          0x43100020  /* Data Controller Bad Block Register 1 */
#define NDDB            0x43100040  /* Data Controller Data Buffer */
#define NDCB0           0x43100048  /* Data Controller Command Buffer0 */
#define NDCB1           0x4310004C  /* Data Controller Command Buffer1 */
#define NDCB2           0x43100050  /* Data Controller Command Buffer2 */

#define NDCR_SPARE_EN   (0x1<<31)
#define NDCR_ECC_EN     (0x1<<30)
#define NDCR_DMA_EN     (0x1<<29)
#define NDCR_ND_RUN     (0x1<<28)
#define NDCR_DWIDTH_C   (0x1<<27)
#define NDCR_DWIDTH_M   (0x1<<26)
#define NDCR_PAGE_SZ    (0x3<<24)
#define NDCR_NCSX       (0x1<<23)
#define NDCR_ND_STOP    (0x1<<22)
/* reserved:
 * #define NDCR_ND_MODE (0x3<<21)
 * #define NDCR_NAND_MODE   0x0 */
#define NDCR_CLR_PG_CNT (0x1<<20)
#define NDCR_CLR_ECC    (0x1<<19)
#define NDCR_RD_ID_CNT  (0x7<<16)
#define NDCR_RA_START   (0x1<<15)
#define NDCR_PG_PER_BLK (0x1<<14)
#define NDCR_ND_ARB_EN  (0x1<<12)
#define NDCR_RDYM       (0x1<<11)
#define NDCR_CS0_PAGEDM (0x1<<10)
#define NDCR_CS1_PAGEDM (0x1<<9)
#define NDCR_CS0_CMDDM  (0x1<<8)
#define NDCR_CS1_CMDDM  (0x1<<7)
#define NDCR_CS0_BBDM   (0x1<<6)
#define NDCR_CS1_BBDM   (0x1<<5)
#define NDCR_DBERRM     (0x1<<4)
#define NDCR_SBERRM     (0x1<<3)
#define NDCR_WRDREQM    (0x1<<2)
#define NDCR_RDDREQM    (0x1<<1)
#define NDCR_WRCMDREQM  (0x1)

#define NDSR_RDY        (0x1<<11)
#define NDSR_CS0_PAGED  (0x1<<10)
#define NDSR_CS1_PAGED  (0x1<<9)
#define NDSR_CS0_CMDD   (0x1<<8)
#define NDSR_CS1_CMDD   (0x1<<7)
#define NDSR_CS0_BBD    (0x1<<6)
#define NDSR_CS1_BBD    (0x1<<5)
#define NDSR_DBERR      (0x1<<4)
#define NDSR_SBERR      (0x1<<3)
#define NDSR_WRDREQ     (0x1<<2)
#define NDSR_RDDREQ     (0x1<<1)
#define NDSR_WRCMDREQ   (0x1)

#define NDCB0_AUTO_RS   (0x1<<25)
#define NDCB0_CSEL      (0x1<<24)
#define NDCB0_CMD_TYPE  (0x7<<21)
#define NDCB0_NC        (0x1<<20)
#define NDCB0_DBC       (0x1<<19)
#define NDCB0_ADDR_CYC  (0x7<<16)
#define NDCB0_CMD2      (0xff<<8)
#define NDCB0_CMD1      (0xff)
#define MCMEM(s) MCMEM0
#define MCATT(s) MCATT0
#define MCIO(s) MCIO0
#define MECR_CIT        (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */

/* Maximum values for NAND Interface Timing Registers in DFC clock
 * periods */
#define DFC_MAX_tCH     7
#define DFC_MAX_tCS     7
#define DFC_MAX_tWH     7
#define DFC_MAX_tWP     7
#define DFC_MAX_tRH     7
#define DFC_MAX_tRP     15
#define DFC_MAX_tR      65535
#define DFC_MAX_tWHR    15
#define DFC_MAX_tAR     15

#define DFC_CLOCK       104             /* DFC Clock is 104 MHz */
#define DFC_CLK_PER_US  DFC_CLOCK/1000  /* clock period in ns */

#else /* CONFIG_CPU_MONAHANS */

/* PXA2xx */

#define MEMC_BASE       0x48000000  /* Base of Memory Controller */
#define MDCNFG_OFFSET   0x0
#define MDREFR_OFFSET   0x4
#define MSC0_OFFSET     0x8
#define MSC1_OFFSET     0xC
#define MSC2_OFFSET     0x10
#define MECR_OFFSET     0x14
#define SXLCR_OFFSET    0x18
#define SXCNFG_OFFSET   0x1C
#define FLYCNFG_OFFSET  0x20
#define SXMRS_OFFSET    0x24
#define MCMEM0_OFFSET   0x28
#define MCMEM1_OFFSET   0x2C
#define MCATT0_OFFSET   0x30
#define MCATT1_OFFSET   0x34
#define MCIO0_OFFSET    0x38
#define MCIO1_OFFSET    0x3C
#define MDMRS_OFFSET    0x40

#define MDCNFG          0x48000000  /* SDRAM Configuration Register 0 */
#define MDCNFG_DE0      0x00000001
#define MDCNFG_DE1      0x00000002
#define MDCNFG_DE2      0x00010000
#define MDCNFG_DE3      0x00020000
#define MDCNFG_DWID0    0x00000004

#define MDREFR          0x48000004  /* SDRAM Refresh Control Register */
#define MSC0            0x48000008  /* Static Memory Control Register 0 */
#define MSC1            0x4800000C  /* Static Memory Control Register 1 */
#define MSC2            0x48000010  /* Static Memory Control Register 2 */
#define MECR            0x48000014  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
#define SXLCR           0x48000018  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
#define SXCNFG          0x4800001C  /* Synchronous Static Memory Control Register */
#define FLYCNFG         0x48000020
#define SXMRS           0x48000024  /* MRS value to be written to Synchronous Flash or SMROM */
#define MCMEM0          0x48000028  /* Card interface Common Memory Space Socket 0 Timing */
#define MCMEM1          0x4800002C  /* Card interface Common Memory Space Socket 1 Timing */
#define MCATT0          0x48000030  /* Card interface Attribute Space Socket 0 Timing Configuration */
#define MCATT1          0x48000034  /* Card interface Attribute Space Socket 1 Timing Configuration */
#define MCIO0           0x48000038  /* Card interface I/O Space Socket 0 Timing Configuration */
#define MCIO1           0x4800003C  /* Card interface I/O Space Socket 1 Timing Configuration */
#define MDMRS           0x48000040  /* MRS value to be written to SDRAM */
#define BOOT_DEF        0x48000044  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */

#define MDREFR_ALTREFA  (1 << 31)       /* Exiting Alternate Bus Master Mode Refresh Control */
#define MDREFR_ALTREFB  (1 << 30)       /* Entering Alternate Bus Master Mode Refresh Control */
#define MDREFR_K0DB4    (1 << 29)       /* SDCLK0 Divide by 4 Control/Status */
#define MDREFR_K2FREE   (1 << 25)       /* SDRAM Free-Running Control */
#define MDREFR_K1FREE   (1 << 24)       /* SDRAM Free-Running Control */
#define MDREFR_K0FREE   (1 << 23)       /* SDRAM Free-Running Control */
#define MDREFR_SLFRSH   (1 << 22)       /* SDRAM Self-Refresh Control/Status */
#define MDREFR_APD      (1 << 20)       /* SDRAM/SSRAM Auto-Power-Down Enable */
#define MDREFR_K2DB2    (1 << 19)       /* SDCLK2 Divide by 2 Control/Status */
#define MDREFR_K2RUN    (1 << 18)       /* SDCLK2 Run Control/Status */
#define MDREFR_K1DB2    (1 << 17)       /* SDCLK1 Divide by 2 Control/Status */
#define MDREFR_K1RUN    (1 << 16)       /* SDCLK1 Run Control/Status */
#define MDREFR_E1PIN    (1 << 15)       /* SDCKE1 Level Control/Status */
#define MDREFR_K0DB2    (1 << 14)       /* SDCLK0 Divide by 2 Control/Status */
#define MDREFR_K0RUN    (1 << 13)       /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN    (1 << 12)       /* SDCKE0 Level Control/Status */

#if defined(CONFIG_PXA27X)

#define ARB_CNTRL       0x48000048  /* Arbiter Control Register */

#define ARB_DMA_SLV_PARK        (1<<31)    /* Be parked with DMA slave when idle */
#define ARB_CI_PARK             (1<<30)    /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK         (1<<29)    /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK        (1<<28)    /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK            (1<<27)    /* Be parked with USB when idle */
#define ARB_LCD_PARK            (1<<26)    /* Be parked with LCD when idle */
#define ARB_DMA_PARK            (1<<25)    /* Be parked with DMA when idle */
#define ARB_CORE_PARK           (1<<24)    /* Be parked with core when idle */
#define ARB_LOCK_FLAG           (1<<23)    /* Only Locking masters gain access to the bus */

#endif /* CONFIG_PXA27X */

/* LCD registers */
#define LCCR4           0x44000010  /* LCD Controller Control Register 4 */
#define LCCR5           0x44000014  /* LCD Controller Control Register 5 */
#define FBR0            0x44000020  /* DMA Channel 0 Frame Branch Register */
#define FBR1            0x44000024  /* DMA Channel 1 Frame Branch Register */
#define FBR2            0x44000028  /* DMA Channel 2 Frame Branch Register */
#define FBR3            0x4400002C  /* DMA Channel 3 Frame Branch Register */
#define FBR4            0x44000030  /* DMA Channel 4 Frame Branch Register */
#define FDADR2          0x44000220  /* DMA Channel 2 Frame Descriptor Address Register */
#define FSADR2          0x44000224  /* DMA Channel 2 Frame Source Address Register */
#define FIDR2           0x44000228  /* DMA Channel 2 Frame ID Register */
#define LDCMD2          0x4400022C  /* DMA Channel 2 Command Register */
#define FDADR3          0x44000230  /* DMA Channel 3 Frame Descriptor Address Register */
#define FSADR3          0x44000234  /* DMA Channel 3 Frame Source Address Register */
#define FIDR3           0x44000238  /* DMA Channel 3 Frame ID Register */
#define LDCMD3          0x4400023C  /* DMA Channel 3 Command Register */
#define FDADR4          0x44000240  /* DMA Channel 4 Frame Descriptor Address Register */
#define FSADR4          0x44000244  /* DMA Channel 4 Frame Source Address Register */
#define FIDR4           0x44000248  /* DMA Channel 4 Frame ID Register */
#define LDCMD4          0x4400024C  /* DMA Channel 4 Command Register */
#define FDADR5          0x44000250  /* DMA Channel 5 Frame Descriptor Address Register */
#define FSADR5          0x44000254  /* DMA Channel 5 Frame Source Address Register */
#define FIDR5           0x44000258  /* DMA Channel 5 Frame ID Register */
#define LDCMD5          0x4400025C  /* DMA Channel 5 Command Register */

#define OVL1C1          0x44000050  /* Overlay 1 Control Register 1 */
#define OVL1C2          0x44000060  /* Overlay 1 Control Register 2 */
#define OVL2C1          0x44000070  /* Overlay 2 Control Register 1 */
#define OVL2C2          0x44000080  /* Overlay 2 Control Register 2 */
#define CCR             0x44000090  /* Cursor Control Register */

#define FBR5            0x44000110  /* DMA Channel 5 Frame Branch Register */
#define FBR6            0x44000114  /* DMA Channel 6 Frame Branch Register */

#define LCCR0_LDDALT    (1<<26)         /* LDD Alternate mapping bit when base pixel is RGBT16 */
#define LCCR0_OUC       (1<<25)         /* Overlay Underlay Control Bit */

#define LCCR5_SOFM1     (1<<0)          /* Start Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_SOFM2     (1<<1)          /* Start Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_SOFM3     (1<<2)          /* Start Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_SOFM4     (1<<3)          /* Start Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_SOFM5     (1<<4)          /* Start Of Frame Mask for cursor (channel 5) */
#define LCCR5_SOFM6     (1<<5)          /* Start Of Frame Mask for command data (channel 6) */

#define LCCR5_EOFM1     (1<<8)          /* End Of Frame Mask for Overlay 1 (channel 1) */
#define LCCR5_EOFM2     (1<<9)          /* End Of Frame Mask for Overlay 2 (channel 2) */
#define LCCR5_EOFM3     (1<<10)         /* End Of Frame Mask for Overlay 2 (channel 3) */
#define LCCR5_EOFM4     (1<<11)         /* End Of Frame Mask for Overlay 2 (channel 4) */
#define LCCR5_EOFM5     (1<<12)         /* End Of Frame Mask for cursor (channel 5) */
#define LCCR5_EOFM6     (1<<13)         /* End Of Frame Mask for command data (channel 6) */

#define LCCR5_BSM1      (1<<16)         /* Branch mask for Overlay 1 (channel 1) */
#define LCCR5_BSM2      (1<<17)         /* Branch mask for Overlay 2 (channel 2) */
#define LCCR5_BSM3      (1<<18)         /* Branch mask for Overlay 2 (channel 3) */
#define LCCR5_BSM4      (1<<19)         /* Branch mask for Overlay 2 (channel 4) */
#define LCCR5_BSM5      (1<<20)         /* Branch mask for cursor (channel 5) */
#define LCCR5_BSM6      (1<<21)         /* Branch mask for data command  (channel 6) */

#define LCCR5_IUM1      (1<<24)         /* Input FIFO Underrun Mask for Overlay 1  */
#define LCCR5_IUM2      (1<<25)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM3      (1<<26)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM4      (1<<27)         /* Input FIFO Underrun Mask for Overlay 2  */
#define LCCR5_IUM5      (1<<28)         /* Input FIFO Underrun Mask for cursor */
#define LCCR5_IUM6      (1<<29)         /* Input FIFO Underrun Mask for data command */

#define OVL1C1_O1EN     (1<<31)         /* Enable bit for Overlay 1 */
#define OVL2C1_O2EN     (1<<31)         /* Enable bit for Overlay 2 */
#define CCR_CEN         (1<<31)         /* Enable bit for Cursor */

/* Keypad controller */

#define KPC             0x41500000 /* Keypad Interface Control register */
#define KPDK            0x41500008 /* Keypad Interface Direct Key register */
#define KPREC           0x41500010 /* Keypad Intefcace Rotary Encoder register */
#define KPMK            0x41500018 /* Keypad Intefcace Matrix Key register */
#define KPAS            0x41500020 /* Keypad Interface Automatic Scan register */
#define KPASMKP0        0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */
#define KPASMKP1        0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */
#define KPASMKP2        0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */
#define KPASMKP3        0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */
#define KPKDI           0x41500048 /* Keypad Interface Key Debounce Interval register */

#define KPC_AS          (0x1 << 30)  /* Automatic Scan bit */
#define KPC_ASACT       (0x1 << 29)  /* Automatic Scan on Activity */
#define KPC_MI          (0x1 << 22)  /* Matrix interrupt bit */
#define KPC_IMKP        (0x1 << 21)  /* Ignore Multiple Key Press */
#define KPC_MS7         (0x1 << 20)  /* Matrix scan line 7 */
#define KPC_MS6         (0x1 << 19)  /* Matrix scan line 6 */
#define KPC_MS5         (0x1 << 18)  /* Matrix scan line 5 */
#define KPC_MS4         (0x1 << 17)  /* Matrix scan line 4 */
#define KPC_MS3         (0x1 << 16)  /* Matrix scan line 3 */
#define KPC_MS2         (0x1 << 15)  /* Matrix scan line 2 */
#define KPC_MS1         (0x1 << 14)  /* Matrix scan line 1 */
#define KPC_MS0         (0x1 << 13)  /* Matrix scan line 0 */
#define KPC_ME          (0x1 << 12)  /* Matrix Keypad Enable */
#define KPC_MIE         (0x1 << 11)  /* Matrix Interrupt Enable */
#define KPC_DK_DEB_SEL  (0x1 <<  9)  /* Direct Key Debounce select */
#define KPC_DI          (0x1 <<  5)  /* Direct key interrupt bit */
#define KPC_DEE0        (0x1 <<  2)  /* Rotary Encoder 0 Enable */
#define KPC_DE          (0x1 <<  1)  /* Direct Keypad Enable */
#define KPC_DIE         (0x1 <<  0)  /* Direct Keypad interrupt Enable */

#define KPDK_DKP        (0x1 << 31)
#define KPDK_DK7        (0x1 <<  7)
#define KPDK_DK6        (0x1 <<  6)
#define KPDK_DK5        (0x1 <<  5)
#define KPDK_DK4        (0x1 <<  4)
#define KPDK_DK3        (0x1 <<  3)
#define KPDK_DK2        (0x1 <<  2)
#define KPDK_DK1        (0x1 <<  1)
#define KPDK_DK0        (0x1 <<  0)

#define KPREC_OF1       (0x1 << 31)
#define kPREC_UF1       (0x1 << 30)
#define KPREC_OF0       (0x1 << 15)
#define KPREC_UF0       (0x1 << 14)

#define KPMK_MKP        (0x1 << 31)
#define KPAS_SO         (0x1 << 31)
#define KPASMKPx_SO     (0x1 << 31)

#define GPIO113_BIT     (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */
#define PSLR            0x40F00034
#define PSTR            0x40F00038  /* Power Manager Standby Configuration Reg */
#define PSNR            0x40F0003C  /* Power Manager Sense Configuration Reg */
#define PVCR            0x40F00040  /* Power Manager Voltage Change Control Reg */
#define PKWR            0x40F00050  /* Power Manager KB Wake-Up Enable Reg */
#define PKSR            0x40F00054  /* Power Manager KB Level-Detect Status Reg */
#define OSMR4           0x40A00080  /* */
#define OSCR4           0x40A00040  /* OS Timer Counter Register */
#define OMCR4           0x40A000C0  /* */

#endif  /* CONFIG_PXA27X */

#endif  /* _PXA_REGS_H_ */