]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - arch/arm/mach-tegra/board.c
ARM: Tegra210: Add support to common Tegra source/config files
[karo-tx-uboot.git] / arch / arm / mach-tegra / board.c
1 /*
2  *  (C) Copyright 2010-2015
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <spl.h>
10 #include <asm/io.h>
11 #include <asm/arch/clock.h>
12 #include <asm/arch/funcmux.h>
13 #include <asm/arch/mc.h>
14 #include <asm/arch/tegra.h>
15 #include <asm/arch-tegra/ap.h>
16 #include <asm/arch-tegra/board.h>
17 #include <asm/arch-tegra/pmc.h>
18 #include <asm/arch-tegra/sys_proto.h>
19 #include <asm/arch-tegra/warmboot.h>
20
21 void save_boot_params_ret(void);
22
23 DECLARE_GLOBAL_DATA_PTR;
24
25 enum {
26         /* UARTs which we can enable */
27         UARTA   = 1 << 0,
28         UARTB   = 1 << 1,
29         UARTC   = 1 << 2,
30         UARTD   = 1 << 3,
31         UARTE   = 1 << 4,
32         UART_COUNT = 5,
33 };
34
35 static bool from_spl __attribute__ ((section(".data")));
36
37 #ifndef CONFIG_SPL_BUILD
38 void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
39 {
40         from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL;
41         save_boot_params_ret();
42 }
43 #endif
44
45 bool spl_was_boot_source(void)
46 {
47         return from_spl;
48 }
49
50 #if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
51 #if !defined(CONFIG_TEGRA124)
52 #error tegra_cpu_is_non_secure has only been validated on Tegra124
53 #endif
54 bool tegra_cpu_is_non_secure(void)
55 {
56         /*
57          * This register reads 0xffffffff in non-secure mode. This register
58          * only implements bits 31:20, so the lower bits will always read 0 in
59          * secure mode. Thus, the lower bits are an indicator for secure vs.
60          * non-secure mode.
61          */
62         struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
63         uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0);
64         return (mc_s_cfg0 & 1) == 1;
65 }
66 #endif
67
68 /* Read the RAM size directly from the memory controller */
69 unsigned int query_sdram_size(void)
70 {
71         struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE;
72         u32 emem_cfg, size_bytes;
73
74         emem_cfg = readl(&mc->mc_emem_cfg);
75 #if defined(CONFIG_TEGRA20)
76         debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", emem_cfg);
77         size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024);
78 #else
79         debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", emem_cfg);
80         /*
81          * If >=4GB RAM is present, the byte RAM size won't fit into 32-bits
82          * and will wrap. Clip the reported size to the maximum that a 32-bit
83          * variable can represent (rounded to a page).
84          */
85         if (emem_cfg >= 4096) {
86                 size_bytes = U32_MAX & ~(0x1000 - 1);
87         } else {
88                 /* RAM size EMC is programmed to. */
89                 size_bytes = emem_cfg * 1024 * 1024;
90                 /*
91                  * If all RAM fits within 32-bits, it can be accessed without
92                  * LPAE, so go test the RAM size. Otherwise, we can't access
93                  * all the RAM, and get_ram_size() would get confused, so
94                  * avoid using it. There's no reason we should need this
95                  * validation step anyway.
96                  */
97                 if (emem_cfg <= (0 - PHYS_SDRAM_1) / (1024 * 1024))
98                         size_bytes = get_ram_size((void *)PHYS_SDRAM_1,
99                                                   size_bytes);
100         }
101 #endif
102
103 #if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114)
104         /* External memory limited to 2047 MB due to IROM/HI-VEC */
105         if (size_bytes == SZ_2G)
106                 size_bytes -= SZ_1M;
107 #endif
108
109         return size_bytes;
110 }
111
112 int dram_init(void)
113 {
114         /* We do not initialise DRAM here. We just query the size */
115         gd->ram_size = query_sdram_size();
116         return 0;
117 }
118
119 static int uart_configs[] = {
120 #if defined(CONFIG_TEGRA20)
121  #if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
122         FUNCMUX_UART1_UAA_UAB,
123  #elif defined(CONFIG_TEGRA_UARTA_GPU)
124         FUNCMUX_UART1_GPU,
125  #elif defined(CONFIG_TEGRA_UARTA_SDIO1)
126         FUNCMUX_UART1_SDIO1,
127  #else
128         FUNCMUX_UART1_IRRX_IRTX,
129 #endif
130         FUNCMUX_UART2_UAD,
131         -1,
132         FUNCMUX_UART4_GMC,
133         -1,
134 #elif defined(CONFIG_TEGRA30)
135         FUNCMUX_UART1_ULPI,     /* UARTA */
136         -1,
137         -1,
138         -1,
139         -1,
140 #elif defined(CONFIG_TEGRA114)
141         -1,
142         -1,
143         -1,
144         FUNCMUX_UART4_GMI,      /* UARTD */
145         -1,
146 #elif defined(CONFIG_TEGRA124)
147         FUNCMUX_UART1_KBC,      /* UARTA */
148         -1,
149         -1,
150         FUNCMUX_UART4_GPIO,     /* UARTD */
151         -1,
152 #else   /* Tegra210 */
153         FUNCMUX_UART1_UART1,    /* UARTA */
154         -1,
155         -1,
156         FUNCMUX_UART4_UART4,    /* UARTD */
157         -1,
158 #endif
159 };
160
161 /**
162  * Set up the specified uarts
163  *
164  * @param uarts_ids     Mask containing UARTs to init (UARTx)
165  */
166 static void setup_uarts(int uart_ids)
167 {
168         static enum periph_id id_for_uart[] = {
169                 PERIPH_ID_UART1,
170                 PERIPH_ID_UART2,
171                 PERIPH_ID_UART3,
172                 PERIPH_ID_UART4,
173                 PERIPH_ID_UART5,
174         };
175         size_t i;
176
177         for (i = 0; i < UART_COUNT; i++) {
178                 if (uart_ids & (1 << i)) {
179                         enum periph_id id = id_for_uart[i];
180
181                         funcmux_select(id, uart_configs[i]);
182                         clock_ll_start_uart(id);
183                 }
184         }
185 }
186
187 void board_init_uart_f(void)
188 {
189         int uart_ids = 0;       /* bit mask of which UART ids to enable */
190
191 #ifdef CONFIG_TEGRA_ENABLE_UARTA
192         uart_ids |= UARTA;
193 #endif
194 #ifdef CONFIG_TEGRA_ENABLE_UARTB
195         uart_ids |= UARTB;
196 #endif
197 #ifdef CONFIG_TEGRA_ENABLE_UARTC
198         uart_ids |= UARTC;
199 #endif
200 #ifdef CONFIG_TEGRA_ENABLE_UARTD
201         uart_ids |= UARTD;
202 #endif
203 #ifdef CONFIG_TEGRA_ENABLE_UARTE
204         uart_ids |= UARTE;
205 #endif
206         setup_uarts(uart_ids);
207 }
208
209 #if !defined(CONFIG_SYS_DCACHE_OFF) && !defined(CONFIG_ARM64)
210 void enable_caches(void)
211 {
212         /* Enable D-cache. I-cache is already enabled in start.S */
213         dcache_enable();
214 }
215 #endif