board/karo/tx53/tx53.c

   1 /*
   2  * Copyright (C) 2011-2013 Lothar Waßmann <LW@KARO-electronics.de>
   3  * based on: board/freescale/mx28_evk.c (C) 2010 Freescale Semiconductor, Inc.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  */
  18
  19 #include <common.h>
  20 #include <errno.h>
  21 #include <libfdt.h>
  22 #include <fdt_support.h>
  23 #include <i2c.h>
  24 #include <lcd.h>
  25 #include <netdev.h>
  26 #include <mmc.h>
  27 #include <fsl_esdhc.h>
  28 #include <video_fb.h>
  29 #include <ipu.h>
  30 #include <mxcfb.h>
  31 #include <linux/fb.h>
  32 #include <asm/io.h>
  33 #include <asm/gpio.h>
  34 #include <asm/arch/iomux-mx53.h>
  35 #include <asm/arch/clock.h>
  36 #include <asm/arch/imx-regs.h>
  37 #include <asm/arch/crm_regs.h>
  38 #include <asm/arch/sys_proto.h>
  39
  40 #include "../common/karo.h"
  41
  42 #define TX53_FEC_RST_GPIO       IMX_GPIO_NR(7, 6)
  43 #define TX53_FEC_PWR_GPIO       IMX_GPIO_NR(3, 20)
  44 #define TX53_FEC_INT_GPIO       IMX_GPIO_NR(2, 4)
  45 #define TX53_LED_GPIO           IMX_GPIO_NR(2, 20)
  46
  47 #define TX53_LCD_PWR_GPIO       IMX_GPIO_NR(2, 31)
  48 #define TX53_LCD_RST_GPIO       IMX_GPIO_NR(3, 29)
  49 #define TX53_LCD_BACKLIGHT_GPIO IMX_GPIO_NR(1, 1)
  50
  51 #define TX53_RESET_OUT_GPIO     IMX_GPIO_NR(7, 12)
  52
  53 DECLARE_GLOBAL_DATA_PTR;
  54
  55 #define MX53_GPIO_PAD_CTRL      MUX_PAD_CTRL(PAD_CTL_PKE | PAD_CTL_PUE | \
  56                                 PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP)
  57
  58 #define TX53_SDHC_PAD_CTRL      MUX_PAD_CTRL(PAD_CTL_HYS | PAD_CTL_DSE_HIGH |   \
  59                                 PAD_CTL_SRE_FAST | PAD_CTL_PUS_47K_UP)
  60
  61 static iomux_v3_cfg_t tx53_pads[] = {
  62         /* NAND flash pads are set up in lowlevel_init.S */
  63
  64         /* UART pads */
  65 #if CONFIG_MXC_UART_BASE == UART1_BASE
  66         MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
  67         MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
  68         MX53_PAD_PATA_IORDY__UART1_RTS,
  69         MX53_PAD_PATA_RESET_B__UART1_CTS,
  70 #endif
  71 #if CONFIG_MXC_UART_BASE == UART2_BASE
  72         MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
  73         MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
  74         MX53_PAD_PATA_DIOR__UART2_RTS,
  75         MX53_PAD_PATA_INTRQ__UART2_CTS,
  76 #endif
  77 #if CONFIG_MXC_UART_BASE == UART3_BASE
  78         MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
  79         MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
  80         MX53_PAD_PATA_DA_2__UART3_RTS,
  81         MX53_PAD_PATA_DA_1__UART3_CTS,
  82 #endif
  83         /* internal I2C */
  84         MX53_PAD_EIM_D28__I2C1_SDA | MX53_GPIO_PAD_CTRL,
  85         MX53_PAD_EIM_D21__I2C1_SCL | MX53_GPIO_PAD_CTRL,
  86
  87         /* FEC PHY GPIO functions */
  88         MX53_PAD_EIM_D20__GPIO3_20, /* PHY POWER */
  89         MX53_PAD_PATA_DA_0__GPIO7_6, /* PHY RESET */
  90         MX53_PAD_PATA_DATA4__GPIO2_4, /* PHY INT */
  91
  92         /* FEC functions */
  93         MX53_PAD_FEC_MDC__FEC_MDC,
  94         MX53_PAD_FEC_MDIO__FEC_MDIO,
  95         MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
  96         MX53_PAD_FEC_RX_ER__FEC_RX_ER,
  97         MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
  98         MX53_PAD_FEC_RXD1__FEC_RDATA_1,
  99         MX53_PAD_FEC_RXD0__FEC_RDATA_0,
 100         MX53_PAD_FEC_TX_EN__FEC_TX_EN,
 101         MX53_PAD_FEC_TXD1__FEC_TDATA_1,
 102         MX53_PAD_FEC_TXD0__FEC_TDATA_0,
 103 };
 104
 105 static const struct gpio tx53_gpios[] = {
 106         { TX53_RESET_OUT_GPIO, GPIOF_OUTPUT_INIT_HIGH, "#RESET_OUT", },
 107         { TX53_FEC_PWR_GPIO, GPIOF_OUTPUT_INIT_HIGH, "FEC PHY PWR", },
 108         { TX53_FEC_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "FEC PHY RESET", },
 109         { TX53_FEC_INT_GPIO, GPIOF_INPUT, "FEC PHY INT", },
 110 };
 111
 112 /*
 113  * Functions
 114  */
 115 /* placed in section '.data' to prevent overwriting relocation info
 116  * overlayed with bss
 117  */
 118 static u32 wrsr __attribute__((section(".data")));
 119
 120 #define WRSR_POR        (1 << 4)
 121 #define WRSR_TOUT       (1 << 1)
 122 #define WRSR_SFTW       (1 << 0)
 123
 124 static void print_reset_cause(void)
 125 {
 126         struct src *src_regs = (struct src *)SRC_BASE_ADDR;
 127         void __iomem *wdt_base = (void __iomem *)WDOG1_BASE_ADDR;
 128         u32 srsr;
 129         char *dlm = "";
 130
 131         printf("Reset cause: ");
 132
 133         srsr = readl(&src_regs->srsr);
 134         wrsr = readw(wdt_base + 4);
 135
 136         if (wrsr & WRSR_POR) {
 137                 printf("%sPOR", dlm);
 138                 dlm = " | ";
 139         }
 140         if (srsr & 0x00004) {
 141                 printf("%sCSU", dlm);
 142                 dlm = " | ";
 143         }
 144         if (srsr & 0x00008) {
 145                 printf("%sIPP USER", dlm);
 146                 dlm = " | ";
 147         }
 148         if (srsr & 0x00010) {
 149                 if (wrsr & WRSR_SFTW) {
 150                         printf("%sSOFT", dlm);
 151                         dlm = " | ";
 152                 }
 153                 if (wrsr & WRSR_TOUT) {
 154                         printf("%sWDOG", dlm);
 155                         dlm = " | ";
 156                 }
 157         }
 158         if (srsr & 0x00020) {
 159                 printf("%sJTAG HIGH-Z", dlm);
 160                 dlm = " | ";
 161         }
 162         if (srsr & 0x00040) {
 163                 printf("%sJTAG SW", dlm);
 164                 dlm = " | ";
 165         }
 166         if (srsr & 0x10000) {
 167                 printf("%sWARM BOOT", dlm);
 168                 dlm = " | ";
 169         }
 170         if (dlm[0] == '\0')
 171                 printf("unknown");
 172
 173         printf("\n");
 174 }
 175
 176 #define pr_lpgr_val(v, n, b, c) do {                                    \
 177         u32 __v = ((v) >> (b)) & ((1 << (c)) - 1);                      \
 178         if (__v)                                                        \
 179                 printf(" %s=%0*x", #n, DIV_ROUND_UP(c, 4), __v);        \
 180 } while (0)
 181
 182 static inline void print_lpgr(u32 lpgr)
 183 {
 184         if (!lpgr)
 185                 return;
 186
 187         printf("LPGR=%08x:", lpgr);
 188         pr_lpgr_val(lpgr, SW_ISO, 31, 1);
 189         pr_lpgr_val(lpgr, SECONDARY_BOOT, 30, 1);
 190         pr_lpgr_val(lpgr, BLOCK_REWRITE, 29, 1);
 191         pr_lpgr_val(lpgr, WDOG_BOOT, 28, 1);
 192         pr_lpgr_val(lpgr, SBMR_SHADOW, 0, 26);
 193         printf("\n");
 194 }
 195
 196 static void tx53_print_cpuinfo(void)
 197 {
 198         u32 cpurev;
 199         struct srtc_regs *srtc_regs = (void *)SRTC_BASE_ADDR;
 200         u32 lpgr = readl(&srtc_regs->lpgr);
 201
 202         cpurev = get_cpu_rev();
 203
 204         printf("CPU:   Freescale i.MX53 rev%d.%d at %d MHz\n",
 205                 (cpurev & 0x000F0) >> 4,
 206                 (cpurev & 0x0000F) >> 0,
 207                 mxc_get_clock(MXC_ARM_CLK) / 1000000);
 208
 209         print_reset_cause();
 210
 211         print_lpgr(lpgr);
 212
 213         if (lpgr & (1 << 30))
 214                 printf("WARNING: U-Boot started from secondary bootstrap image\n");
 215
 216         if (lpgr) {
 217                 struct mxc_ccm_reg *ccm_regs = (void *)CCM_BASE_ADDR;
 218                 u32 ccgr4 = readl(&ccm_regs->CCGR4);
 219
 220                 writel(ccgr4 | MXC_CCM_CCGR4_SRTC(3), &ccm_regs->CCGR4);
 221                 writel(0, &srtc_regs->lpgr);
 222                 writel(ccgr4, &ccm_regs->CCGR4);
 223         }
 224 }
 225
 226 enum LTC3589_REGS {
 227         LTC3589_SCR1 = 0x07,
 228         LTC3589_SCR2 = 0x12,
 229         LTC3589_VCCR = 0x20,
 230         LTC3589_CLIRQ = 0x21,
 231         LTC3589_B1DTV1 = 0x23,
 232         LTC3589_B1DTV2 = 0x24,
 233         LTC3589_VRRCR = 0x25,
 234         LTC3589_B2DTV1 = 0x26,
 235         LTC3589_B2DTV2 = 0x27,
 236         LTC3589_B3DTV1 = 0x29,
 237         LTC3589_B3DTV2 = 0x2a,
 238         LTC3589_L2DTV1 = 0x32,
 239         LTC3589_L2DTV2 = 0x33,
 240 };
 241
 242 #define LTC3589_BnDTV1_PGOOD_MASK       (1 << 5)
 243 #define LTC3589_BnDTV1_SLEW(n)          (((n) & 3) << 6)
 244
 245 #define LTC3589_CLK_RATE_LOW            (1 << 5)
 246
 247 #define LTC3589_SCR2_PGOOD_SHUTDWN      (1 << 7)
 248
 249 #define VDD_LDO2_VAL            mV_to_regval(vout_to_vref(1325 * 10, 2))
 250 #define VDD_CORE_VAL            mV_to_regval(vout_to_vref(1100 * 10, 3))
 251 #define VDD_SOC_VAL             mV_to_regval(vout_to_vref(1325 * 10, 4))
 252 #define VDD_BUCK3_VAL           mV_to_regval(vout_to_vref(2500 * 10, 5))
 253
 254 #ifndef CONFIG_SYS_TX53_HWREV_2
 255 /* LDO2 vref divider */
 256 #define R1_2    180
 257 #define R2_2    191
 258 /* BUCK1 vref divider */
 259 #define R1_3    150
 260 #define R2_3    180
 261 /* BUCK2 vref divider */
 262 #define R1_4    180
 263 #define R2_4    191
 264 /* BUCK3 vref divider */
 265 #define R1_5    270
 266 #define R2_5    100
 267 #else
 268 /* no dividers on vref */
 269 #define R1_2    0
 270 #define R2_2    1
 271 #define R1_3    0
 272 #define R2_3    1
 273 #define R1_4    0
 274 #define R2_4    1
 275 #define R1_5    0
 276 #define R2_5    1
 277 #endif
 278
 279 /* calculate voltages in 10mV */
 280 #define R1(idx)                 R1_##idx
 281 #define R2(idx)                 R2_##idx
 282
 283 #define vout_to_vref(vout, idx) ((vout) * R2(idx) / (R1(idx) + R2(idx)))
 284 #define vref_to_vout(vref, idx) DIV_ROUND_UP((vref) * (R1(idx) + R2(idx)), R2(idx))
 285
 286 #define mV_to_regval(mV)        DIV_ROUND(((((mV) < 3625) ? 3625 : (mV)) - 3625), 125)
 287 #define regval_to_mV(v)         (((v) * 125 + 3625))
 288
 289 static struct pmic_regs {
 290         enum LTC3589_REGS addr;
 291         u8 val;
 292 } ltc3589_regs[] = {
 293         { LTC3589_SCR1, 0x15, }, /* burst mode for all regulators except buck boost */
 294         { LTC3589_SCR2, LTC3589_SCR2_PGOOD_SHUTDWN, }, /* enable shutdown on PGOOD Timeout */
 295
 296         { LTC3589_L2DTV1, VDD_LDO2_VAL | LTC3589_BnDTV1_SLEW(3) | LTC3589_BnDTV1_PGOOD_MASK, },
 297         { LTC3589_L2DTV2, VDD_LDO2_VAL | LTC3589_CLK_RATE_LOW, },
 298
 299         { LTC3589_B1DTV1, VDD_CORE_VAL | LTC3589_BnDTV1_SLEW(3) | LTC3589_BnDTV1_PGOOD_MASK, },
 300         { LTC3589_B1DTV2, VDD_CORE_VAL, },
 301
 302         { LTC3589_B2DTV1, VDD_SOC_VAL | LTC3589_BnDTV1_SLEW(3) | LTC3589_BnDTV1_PGOOD_MASK, },
 303         { LTC3589_B2DTV2, VDD_SOC_VAL, },
 304
 305         { LTC3589_B3DTV1, VDD_BUCK3_VAL | LTC3589_BnDTV1_SLEW(3) | LTC3589_BnDTV1_PGOOD_MASK, },
 306         { LTC3589_B3DTV2, VDD_BUCK3_VAL, },
 307
 308         /* Select ref 0 for all regulators and enable slew */
 309         { LTC3589_VCCR, 0x55, },
 310
 311         { LTC3589_CLIRQ, 0, }, /* clear all interrupt flags */
 312 };
 313
 314 static int setup_pmic_voltages(void)
 315 {
 316         int ret;
 317         unsigned char value;
 318         int i;
 319
 320         ret = i2c_probe(CONFIG_SYS_I2C_SLAVE);
 321         if (ret != 0) {
 322                 printf("Failed to initialize I2C\n");
 323                 return ret;
 324         }
 325
 326         ret = i2c_read(CONFIG_SYS_I2C_SLAVE, 0x11, 1, &value, 1);
 327         if (ret) {
 328                 printf("%s: i2c_read error: %d\n", __func__, ret);
 329                 return ret;
 330         }
 331
 332         for (i = 0; i < ARRAY_SIZE(ltc3589_regs); i++) {
 333                 ret = i2c_read(CONFIG_SYS_I2C_SLAVE, ltc3589_regs[i].addr, 1,
 334                                 &value, 1);
 335                 debug("Writing %02x to reg %02x (%02x)\n",
 336                         ltc3589_regs[i].val, ltc3589_regs[i].addr, value);
 337                 ret = i2c_write(CONFIG_SYS_I2C_SLAVE, ltc3589_regs[i].addr, 1,
 338                                 &ltc3589_regs[i].val, 1);
 339                 if (ret) {
 340                         printf("%s: failed to write PMIC register %02x: %d\n",
 341                                 __func__, ltc3589_regs[i].addr, ret);
 342                         return ret;
 343                 }
 344         }
 345         printf("VDDCORE set to %umV\n",
 346                 DIV_ROUND(vref_to_vout(regval_to_mV(VDD_CORE_VAL), 3), 10));
 347
 348         printf("VDDSOC  set to %umV\n",
 349                 DIV_ROUND(vref_to_vout(regval_to_mV(VDD_SOC_VAL), 4), 10));
 350         return 0;
 351 }
 352
 353 static struct {
 354         u32 max_freq;
 355         u32 mV;
 356 } tx53_core_voltages[] = {
 357         { 800000000, 1100, },
 358         { 1000000000, 1240, },
 359         { 1200000000, 1350, },
 360 };
 361
 362 int adjust_core_voltage(u32 freq)
 363 {
 364         int ret;
 365         int i;
 366
 367         printf("%s@%d\n", __func__, __LINE__);
 368
 369         for (i = 0; i < ARRAY_SIZE(tx53_core_voltages); i++) {
 370                 if (freq <= tx53_core_voltages[i].max_freq) {
 371                         int retries = 0;
 372                         const int max_tries = 10;
 373                         const int delay_us = 1;
 374                         u32 mV = tx53_core_voltages[i].mV;
 375                         u8 val = mV_to_regval(vout_to_vref(mV * 10, 3));
 376                         u8 v;
 377
 378                         debug("regval[%umV]=%02x\n", mV, val);
 379
 380                         ret = i2c_read(CONFIG_SYS_I2C_SLAVE, LTC3589_B1DTV1, 1,
 381                                 &v, 1);
 382                         if (ret) {
 383                                 printf("%s: failed to read PMIC register %02x: %d\n",
 384                                         __func__, LTC3589_B1DTV1, ret);
 385                                 return ret;
 386                         }
 387                         debug("Changing reg %02x from %02x to %02x\n",
 388                                 LTC3589_B1DTV1, v, (v & ~0x1f) |
 389                                 mV_to_regval(vout_to_vref(mV * 10, 3)));
 390                         v &= ~0x1f;
 391                         v |= mV_to_regval(vout_to_vref(mV * 10, 3));
 392                         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3589_B1DTV1, 1,
 393                                         &v, 1);
 394                         if (ret) {
 395                                 printf("%s: failed to write PMIC register %02x: %d\n",
 396                                         __func__, LTC3589_B1DTV1, ret);
 397                                 return ret;
 398                         }
 399                         ret = i2c_read(CONFIG_SYS_I2C_SLAVE, LTC3589_VCCR, 1,
 400                                         &v, 1);
 401                         if (ret) {
 402                                 printf("%s: failed to read PMIC register %02x: %d\n",
 403                                         __func__, LTC3589_VCCR, ret);
 404                                 return ret;
 405                         }
 406                         v |= 0x1;
 407                         ret = i2c_write(CONFIG_SYS_I2C_SLAVE, LTC3589_VCCR, 1,
 408                                         &v, 1);
 409                         if (ret) {
 410                                 printf("%s: failed to write PMIC register %02x: %d\n",
 411                                         __func__, LTC3589_VCCR, ret);
 412                                 return ret;
 413                         }
 414                         for (retries = 0; retries < max_tries; retries++) {
 415                                 ret = i2c_read(CONFIG_SYS_I2C_SLAVE,
 416                                         LTC3589_VCCR, 1, &v, 1);
 417                                 if (ret) {
 418                                         printf("%s: failed to read PMIC register %02x: %d\n",
 419                                                 __func__, LTC3589_VCCR, ret);
 420                                         return ret;
 421                                 }
 422                                 if (!(v & 1))
 423                                         break;
 424                                 udelay(delay_us);
 425                         }
 426                         if (v & 1) {
 427                                 printf("change of VDDCORE did not complete after %uµs\n",
 428                                         retries * delay_us);
 429                                 return -ETIMEDOUT;
 430                         }
 431
 432                         printf("VDDCORE set to %umV after %u loops\n",
 433                                 DIV_ROUND(vref_to_vout(regval_to_mV(val & 0x1f), 3),
 434                                         10), retries);
 435                         return 0;
 436                 }
 437         }
 438         return -EINVAL;
 439 }
 440
 441 int board_early_init_f(void)
 442 {
 443         struct mxc_ccm_reg *ccm_regs = (void *)CCM_BASE_ADDR;
 444
 445         gpio_request_array(tx53_gpios, ARRAY_SIZE(tx53_gpios));
 446         imx_iomux_v3_setup_multiple_pads(tx53_pads, ARRAY_SIZE(tx53_pads));
 447
 448         writel(0x77777777, AIPS1_BASE_ADDR + 0x00);
 449         writel(0x77777777, AIPS1_BASE_ADDR + 0x04);
 450
 451         writel(0x00000000, AIPS1_BASE_ADDR + 0x40);
 452         writel(0x00000000, AIPS1_BASE_ADDR + 0x44);
 453         writel(0x00000000, AIPS1_BASE_ADDR + 0x48);
 454         writel(0x00000000, AIPS1_BASE_ADDR + 0x4c);
 455         writel(0x00000000, AIPS1_BASE_ADDR + 0x50);
 456
 457         writel(0x77777777, AIPS2_BASE_ADDR + 0x00);
 458         writel(0x77777777, AIPS2_BASE_ADDR + 0x04);
 459
 460         writel(0x00000000, AIPS2_BASE_ADDR + 0x40);
 461         writel(0x00000000, AIPS2_BASE_ADDR + 0x44);
 462         writel(0x00000000, AIPS2_BASE_ADDR + 0x48);
 463         writel(0x00000000, AIPS2_BASE_ADDR + 0x4c);
 464         writel(0x00000000, AIPS2_BASE_ADDR + 0x50);
 465
 466         writel(0xffcf0fff, &ccm_regs->CCGR0);
 467         writel(0x000fffcf, &ccm_regs->CCGR1);
 468         writel(0x033c0000, &ccm_regs->CCGR2);
 469         writel(0x000000ff, &ccm_regs->CCGR3);
 470         writel(0x00000000, &ccm_regs->CCGR4);
 471         writel(0x00fff033, &ccm_regs->CCGR5);
 472         writel(0x0f00030f, &ccm_regs->CCGR6);
 473         writel(0xfff00000, &ccm_regs->CCGR7);
 474         writel(0x00000000, &ccm_regs->cmeor);
 475
 476         return 0;
 477 }
 478
 479 int board_init(void)
 480 {
 481         int ret;
 482
 483         /* Address of boot parameters */
 484         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x1000;
 485
 486         if (ctrlc() || (wrsr & WRSR_TOUT)) {
 487                 printf("CTRL-C detected; Skipping PMIC setup\n");
 488                 return 1;
 489         }
 490
 491         ret = setup_pmic_voltages();
 492         if (ret) {
 493                 printf("Failed to setup PMIC voltages\n");
 494                 hang();
 495         }
 496         return 0;
 497 }
 498
 499 int dram_init(void)
 500 {
 501         int ret;
 502
 503         /*
 504          * U-Boot doesn't support RAM banks with intervening holes,
 505          * so let U-Boot only know about the first bank for its
 506          * internal data structures. The size reported to Linux is
 507          * determined from the individual bank sizes.
 508          */
 509         gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, SZ_1G);
 510
 511         ret = mxc_set_clock(CONFIG_SYS_MX5_HCLK,
 512                 CONFIG_SYS_SDRAM_CLK, MXC_DDR_CLK);
 513         if (ret)
 514                 printf("%s: Failed to set DDR clock to %u MHz: %d\n", __func__,
 515                         CONFIG_SYS_SDRAM_CLK, ret);
 516         else
 517                 debug("%s: DDR clock set to %u.%03u MHz (desig.: %u.000 MHz)\n",
 518                         __func__, mxc_get_clock(MXC_DDR_CLK) / 1000000,
 519                         mxc_get_clock(MXC_DDR_CLK) / 1000 % 1000,
 520                         CONFIG_SYS_SDRAM_CLK);
 521         return ret;
 522 }
 523
 524 void dram_init_banksize(void)
 525 {
 526         long total_size = gd->ram_size;
 527
 528         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
 529         gd->bd->bi_dram[0].size = gd->ram_size;
 530
 531 #if CONFIG_NR_DRAM_BANKS > 1
 532         gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, SZ_1G);
 533
 534         if (gd->bd->bi_dram[1].size) {
 535                 debug("Found %luMiB SDRAM in bank 2\n",
 536                         gd->bd->bi_dram[1].size / SZ_1M);
 537                 gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
 538                 total_size += gd->bd->bi_dram[1].size;
 539         }
 540 #endif
 541         if (total_size != CONFIG_SYS_SDRAM_SIZE)
 542                 printf("WARNING: SDRAM size mismatch: %uMiB configured; %luMiB detected\n",
 543                         CONFIG_SYS_SDRAM_SIZE / SZ_1M, total_size / SZ_1M);
 544 }
 545
 546 #ifdef  CONFIG_CMD_MMC
 547 static const iomux_v3_cfg_t mmc0_pads[] = {
 548         MX53_PAD_SD1_CMD__ESDHC1_CMD | TX53_SDHC_PAD_CTRL,
 549         MX53_PAD_SD1_CLK__ESDHC1_CLK | TX53_SDHC_PAD_CTRL,
 550         MX53_PAD_SD1_DATA0__ESDHC1_DAT0 | TX53_SDHC_PAD_CTRL,
 551         MX53_PAD_SD1_DATA1__ESDHC1_DAT1 | TX53_SDHC_PAD_CTRL,
 552         MX53_PAD_SD1_DATA2__ESDHC1_DAT2 | TX53_SDHC_PAD_CTRL,
 553         MX53_PAD_SD1_DATA3__ESDHC1_DAT3 | TX53_SDHC_PAD_CTRL,
 554         /* SD1 CD */
 555         MX53_PAD_EIM_D24__GPIO3_24 | MX53_GPIO_PAD_CTRL,
 556 };
 557
 558 static const iomux_v3_cfg_t mmc1_pads[] = {
 559         MX53_PAD_SD2_CMD__ESDHC2_CMD | TX53_SDHC_PAD_CTRL,
 560         MX53_PAD_SD2_CLK__ESDHC2_CLK | TX53_SDHC_PAD_CTRL,
 561         MX53_PAD_SD2_DATA0__ESDHC2_DAT0 | TX53_SDHC_PAD_CTRL,
 562         MX53_PAD_SD2_DATA1__ESDHC2_DAT1 | TX53_SDHC_PAD_CTRL,
 563         MX53_PAD_SD2_DATA2__ESDHC2_DAT2 | TX53_SDHC_PAD_CTRL,
 564         MX53_PAD_SD2_DATA3__ESDHC2_DAT3 | TX53_SDHC_PAD_CTRL,
 565         /* SD2 CD */
 566         MX53_PAD_EIM_D25__GPIO3_25 | MX53_GPIO_PAD_CTRL,
 567 };
 568
 569 static struct tx53_esdhc_cfg {
 570         const iomux_v3_cfg_t *pads;
 571         int num_pads;
 572         struct fsl_esdhc_cfg cfg;
 573         int cd_gpio;
 574 } tx53_esdhc_cfg[] = {
 575         {
 576                 .pads = mmc0_pads,
 577                 .num_pads = ARRAY_SIZE(mmc0_pads),
 578                 .cfg = {
 579                         .esdhc_base = (void __iomem *)MMC_SDHC1_BASE_ADDR,
 580                         .max_bus_width = 4,
 581                 },
 582                 .cd_gpio = IMX_GPIO_NR(3, 24),
 583         },
 584         {
 585                 .pads = mmc1_pads,
 586                 .num_pads = ARRAY_SIZE(mmc1_pads),
 587                 .cfg = {
 588                         .esdhc_base = (void __iomem *)MMC_SDHC2_BASE_ADDR,
 589                         .max_bus_width = 4,
 590                 },
 591                 .cd_gpio = IMX_GPIO_NR(3, 25),
 592         },
 593 };
 594
 595 static inline struct tx53_esdhc_cfg *to_tx53_esdhc_cfg(struct fsl_esdhc_cfg *cfg)
 596 {
 597         return container_of(cfg, struct tx53_esdhc_cfg, cfg);
 598 }
 599
 600 int board_mmc_getcd(struct mmc *mmc)
 601 {
 602         struct tx53_esdhc_cfg *cfg = to_tx53_esdhc_cfg(mmc->priv);
 603
 604         if (cfg->cd_gpio < 0)
 605                 return cfg->cd_gpio;
 606
 607         debug("SD card %d is %spresent\n",
 608                 cfg - tx53_esdhc_cfg,
 609                 gpio_get_value(cfg->cd_gpio) ? "NOT " : "");
 610         return !gpio_get_value(cfg->cd_gpio);
 611 }
 612
 613 int board_mmc_init(bd_t *bis)
 614 {
 615         int i;
 616
 617         for (i = 0; i < ARRAY_SIZE(tx53_esdhc_cfg); i++) {
 618                 struct mmc *mmc;
 619                 struct tx53_esdhc_cfg *cfg = &tx53_esdhc_cfg[i];
 620                 int ret;
 621
 622                 imx_iomux_v3_setup_multiple_pads(cfg->pads, cfg->num_pads);
 623                 cfg->cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 624
 625                 ret = gpio_request_one(cfg->cd_gpio,
 626                                 GPIOF_INPUT, "MMC CD");
 627                 if (ret) {
 628                         printf("Error %d requesting GPIO%d_%d\n",
 629                                 ret, cfg->cd_gpio / 32, cfg->cd_gpio % 32);
 630                         continue;
 631                 }
 632
 633                 debug("%s: Initializing MMC slot %d\n", __func__, i);
 634                 fsl_esdhc_initialize(bis, &cfg->cfg);
 635
 636                 mmc = find_mmc_device(i);
 637                 if (mmc == NULL)
 638                         continue;
 639                 if (board_mmc_getcd(mmc) > 0)
 640                         mmc_init(mmc);
 641         }
 642         return 0;
 643 }
 644 #endif /* CONFIG_CMD_MMC */
 645
 646 #ifdef CONFIG_FEC_MXC
 647
 648 #ifndef ETH_ALEN
 649 #define ETH_ALEN 6
 650 #endif
 651
 652 void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
 653 {
 654         int i;
 655         struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
 656         struct fuse_bank *bank = &iim->bank[1];
 657         struct fuse_bank1_regs *fuse = (struct fuse_bank1_regs *)bank->fuse_regs;
 658
 659         if (dev_id > 0)
 660                 return;
 661
 662         for (i = 0; i < ETH_ALEN; i++)
 663                 mac[i] = readl(&fuse->mac_addr[i]);
 664 }
 665
 666 #define FEC_PAD_CTL     (PAD_CTL_DVS | PAD_CTL_DSE_HIGH | \
 667                         PAD_CTL_SRE_FAST)
 668 #define FEC_PAD_CTL2    (PAD_CTL_DVS | PAD_CTL_SRE_FAST)
 669 #define GPIO_PAD_CTL    (PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
 670
 671 int board_eth_init(bd_t *bis)
 672 {
 673         int ret;
 674
 675         /* delay at least 21ms for the PHY internal POR signal to deassert */
 676         udelay(22000);
 677
 678         /* Deassert RESET to the external phy */
 679         gpio_set_value(TX53_FEC_RST_GPIO, 1);
 680
 681         ret = cpu_eth_init(bis);
 682         if (ret)
 683                 printf("cpu_eth_init() failed: %d\n", ret);
 684
 685         return ret;
 686 }
 687 #endif /* CONFIG_FEC_MXC */
 688
 689 enum {
 690         LED_STATE_INIT = -1,
 691         LED_STATE_OFF,
 692         LED_STATE_ON,
 693 };
 694
 695 void show_activity(int arg)
 696 {
 697         static int led_state = LED_STATE_INIT;
 698         static ulong last;
 699
 700         if (led_state == LED_STATE_INIT) {
 701                 last = get_timer(0);
 702                 gpio_set_value(TX53_LED_GPIO, 1);
 703                 led_state = LED_STATE_ON;
 704         } else {
 705                 if (get_timer(last) > CONFIG_SYS_HZ) {
 706                         last = get_timer(0);
 707                         if (led_state == LED_STATE_ON) {
 708                                 gpio_set_value(TX53_LED_GPIO, 0);
 709                         } else {
 710                                 gpio_set_value(TX53_LED_GPIO, 1);
 711                         }
 712                         led_state = 1 - led_state;
 713                 }
 714         }
 715 }
 716
 717 static const iomux_v3_cfg_t stk5_pads[] = {
 718         /* SW controlled LED on STK5 baseboard */
 719         MX53_PAD_EIM_A18__GPIO2_20,
 720
 721         /* I2C bus on DIMM pins 40/41 */
 722         MX53_PAD_GPIO_6__I2C3_SDA | MX53_GPIO_PAD_CTRL,
 723         MX53_PAD_GPIO_3__I2C3_SCL | MX53_GPIO_PAD_CTRL,
 724
 725         /* TSC200x PEN IRQ */
 726         MX53_PAD_EIM_D26__GPIO3_26 | MX53_GPIO_PAD_CTRL,
 727
 728         /* EDT-FT5x06 Polytouch panel */
 729         MX53_PAD_NANDF_CS2__GPIO6_15 | MX53_GPIO_PAD_CTRL, /* IRQ */
 730         MX53_PAD_EIM_A16__GPIO2_22 | MX53_GPIO_PAD_CTRL, /* RESET */
 731         MX53_PAD_EIM_A17__GPIO2_21 | MX53_GPIO_PAD_CTRL, /* WAKE */
 732
 733         /* USBH1 */
 734         MX53_PAD_EIM_D31__GPIO3_31 | MX53_GPIO_PAD_CTRL, /* VBUSEN */
 735         MX53_PAD_EIM_D30__GPIO3_30 | MX53_GPIO_PAD_CTRL, /* OC */
 736         /* USBOTG */
 737         MX53_PAD_GPIO_7__GPIO1_7, /* VBUSEN */
 738         MX53_PAD_GPIO_8__GPIO1_8, /* OC */
 739
 740         /* DS1339 Interrupt */
 741         MX53_PAD_DI0_PIN4__GPIO4_20 | MX53_GPIO_PAD_CTRL,
 742 };
 743
 744 static const struct gpio stk5_gpios[] = {
 745         { TX53_LED_GPIO, GPIOF_OUTPUT_INIT_LOW, "HEARTBEAT LED", },
 746
 747         { IMX_GPIO_NR(1, 8), GPIOF_INPUT, "USBOTG OC", },
 748         { IMX_GPIO_NR(1, 7), GPIOF_OUTPUT_INIT_LOW, "USBOTG VBUS enable", },
 749         { IMX_GPIO_NR(3, 30), GPIOF_INPUT, "USBH1 OC", },
 750         { IMX_GPIO_NR(3, 31), GPIOF_OUTPUT_INIT_LOW, "USBH1 VBUS enable", },
 751 };
 752
 753 #ifdef CONFIG_LCD
 754 static u16 tx53_cmap[256];
 755 vidinfo_t panel_info = {
 756         /* set to max. size supported by SoC */
 757         .vl_col = 1600,
 758         .vl_row = 1200,
 759
 760         .vl_bpix = LCD_COLOR24,    /* Bits per pixel, 0: 1bpp, 1: 2bpp, 2: 4bpp, 3: 8bpp ... */
 761         .cmap = tx53_cmap,
 762 };
 763
 764 static struct fb_videomode tx53_fb_modes[] = {
 765 #ifndef CONFIG_SYS_LVDS_IF
 766         {
 767                 /* Standard VGA timing */
 768                 .name           = "VGA",
 769                 .refresh        = 60,
 770                 .xres           = 640,
 771                 .yres           = 480,
 772                 .pixclock       = KHZ2PICOS(25175),
 773                 .left_margin    = 48,
 774                 .hsync_len      = 96,
 775                 .right_margin   = 16,
 776                 .upper_margin   = 31,
 777                 .vsync_len      = 2,
 778                 .lower_margin   = 12,
 779                 .sync           = FB_SYNC_CLK_LAT_FALL,
 780         },
 781         {
 782                 /* Emerging ETV570 640 x 480 display. Syncs low active,
 783                  * DE high active, 115.2 mm x 86.4 mm display area
 784                  * VGA compatible timing
 785                  */
 786                 .name           = "ETV570",
 787                 .refresh        = 60,
 788                 .xres           = 640,
 789                 .yres           = 480,
 790                 .pixclock       = KHZ2PICOS(25175),
 791                 .left_margin    = 114,
 792                 .hsync_len      = 30,
 793                 .right_margin   = 16,
 794                 .upper_margin   = 32,
 795                 .vsync_len      = 3,
 796                 .lower_margin   = 10,
 797                 .sync           = FB_SYNC_CLK_LAT_FALL,
 798         },
 799         {
 800                 /* Emerging ET0350G0DH6 320 x 240 display.
 801                  * 70.08 mm x 52.56 mm display area.
 802                  */
 803                 .name           = "ET0350",
 804                 .refresh        = 60,
 805                 .xres           = 320,
 806                 .yres           = 240,
 807                 .pixclock       = KHZ2PICOS(6500),
 808                 .left_margin    = 68 - 34,
 809                 .hsync_len      = 34,
 810                 .right_margin   = 20,
 811                 .upper_margin   = 18 - 3,
 812                 .vsync_len      = 3,
 813                 .lower_margin   = 4,
 814                 .sync           = FB_SYNC_CLK_LAT_FALL,
 815         },
 816         {
 817                 /* Emerging ET0430G0DH6 480 x 272 display.
 818                  * 95.04 mm x 53.856 mm display area.
 819                  */
 820                 .name           = "ET0430",
 821                 .refresh        = 60,
 822                 .xres           = 480,
 823                 .yres           = 272,
 824                 .pixclock       = KHZ2PICOS(9000),
 825                 .left_margin    = 2,
 826                 .hsync_len      = 41,
 827                 .right_margin   = 2,
 828                 .upper_margin   = 2,
 829                 .vsync_len      = 10,
 830                 .lower_margin   = 2,
 831                 .sync           = FB_SYNC_CLK_LAT_FALL,
 832         },
 833         {
 834                 /* Emerging ET0500G0DH6 800 x 480 display.
 835                  * 109.6 mm x 66.4 mm display area.
 836                  */
 837                 .name           = "ET0500",
 838                 .refresh        = 60,
 839                 .xres           = 800,
 840                 .yres           = 480,
 841                 .pixclock       = KHZ2PICOS(33260),
 842                 .left_margin    = 216 - 128,
 843                 .hsync_len      = 128,
 844                 .right_margin   = 1056 - 800 - 216,
 845                 .upper_margin   = 35 - 2,
 846                 .vsync_len      = 2,
 847                 .lower_margin   = 525 - 480 - 35,
 848                 .sync           = FB_SYNC_CLK_LAT_FALL,
 849         },
 850         {
 851                 /* Emerging ETQ570G0DH6 320 x 240 display.
 852                  * 115.2 mm x 86.4 mm display area.
 853                  */
 854                 .name           = "ETQ570",
 855                 .refresh        = 60,
 856                 .xres           = 320,
 857                 .yres           = 240,
 858                 .pixclock       = KHZ2PICOS(6400),
 859                 .left_margin    = 38,
 860                 .hsync_len      = 30,
 861                 .right_margin   = 30,
 862                 .upper_margin   = 16, /* 15 according to datasheet */
 863                 .vsync_len      = 3, /* TVP -> 1>x>5 */
 864                 .lower_margin   = 4, /* 4.5 according to datasheet */
 865                 .sync           = FB_SYNC_CLK_LAT_FALL,
 866         },
 867         {
 868                 /* Emerging ET0700G0DH6 800 x 480 display.
 869                  * 152.4 mm x 91.44 mm display area.
 870                  */
 871                 .name           = "ET0700",
 872                 .refresh        = 60,
 873                 .xres           = 800,
 874                 .yres           = 480,
 875                 .pixclock       = KHZ2PICOS(33260),
 876                 .left_margin    = 216 - 128,
 877                 .hsync_len      = 128,
 878                 .right_margin   = 1056 - 800 - 216,
 879                 .upper_margin   = 35 - 2,
 880                 .vsync_len      = 2,
 881                 .lower_margin   = 525 - 480 - 35,
 882                 .sync           = FB_SYNC_CLK_LAT_FALL,
 883         },
 884 #else
 885         {
 886                 /* HannStar HSD100PXN1
 887                  * 202.7m mm x 152.06 mm display area.
 888                  */
 889                 .name           = "HSD100PXN1",
 890                 .refresh        = 60,
 891                 .xres           = 1024,
 892                 .yres           = 768,
 893                 .pixclock       = KHZ2PICOS(65000),
 894                 .left_margin    = 0,
 895                 .hsync_len      = 0,
 896                 .right_margin   = 320,
 897                 .upper_margin   = 0,
 898                 .vsync_len      = 0,
 899                 .lower_margin   = 38,
 900                 .sync           = FB_SYNC_CLK_LAT_FALL,
 901         },
 902 #endif
 903         {
 904                 /* unnamed entry for assigning parameters parsed from 'video_mode' string */
 905                 .refresh        = 60,
 906                 .left_margin    = 48,
 907                 .hsync_len      = 96,
 908                 .right_margin   = 16,
 909                 .upper_margin   = 31,
 910                 .vsync_len      = 2,
 911                 .lower_margin   = 12,
 912                 .sync           = FB_SYNC_CLK_LAT_FALL,
 913         },
 914 };
 915
 916 static int lcd_enabled = 1;
 917 static int lcd_bl_polarity;
 918
 919 static int lcd_backlight_polarity(void)
 920 {
 921         return lcd_bl_polarity;
 922 }
 923
 924 void lcd_enable(void)
 925 {
 926         /* HACK ALERT:
 927          * global variable from common/lcd.c
 928          * Set to 0 here to prevent messages from going to LCD
 929          * rather than serial console
 930          */
 931         lcd_is_enabled = 0;
 932
 933         if (lcd_enabled) {
 934                 karo_load_splashimage(1);
 935
 936                 debug("Switching LCD on\n");
 937                 gpio_set_value(TX53_LCD_PWR_GPIO, 1);
 938                 udelay(100);
 939                 gpio_set_value(TX53_LCD_RST_GPIO, 1);
 940                 udelay(300000);
 941                 gpio_set_value(TX53_LCD_BACKLIGHT_GPIO,
 942                         lcd_backlight_polarity());
 943         }
 944 }
 945
 946 void lcd_disable(void)
 947 {
 948         if (lcd_enabled) {
 949                 printf("Disabling LCD\n");
 950                 ipuv3_fb_shutdown();
 951         }
 952 }
 953
 954 void lcd_panel_disable(void)
 955 {
 956         if (lcd_enabled) {
 957                 debug("Switching LCD off\n");
 958                 gpio_set_value(TX53_LCD_BACKLIGHT_GPIO,
 959                         !lcd_backlight_polarity());
 960                 gpio_set_value(TX53_LCD_RST_GPIO, 0);
 961                 gpio_set_value(TX53_LCD_PWR_GPIO, 0);
 962         }
 963 }
 964
 965 static const iomux_v3_cfg_t stk5_lcd_pads[] = {
 966         /* LCD RESET */
 967         MX53_PAD_EIM_D29__GPIO3_29 | MX53_GPIO_PAD_CTRL,
 968         /* LCD POWER_ENABLE */
 969         MX53_PAD_EIM_EB3__GPIO2_31 | MX53_GPIO_PAD_CTRL,
 970         /* LCD Backlight (PWM) */
 971         MX53_PAD_GPIO_1__GPIO1_1 | MX53_GPIO_PAD_CTRL,
 972
 973         /* Display */
 974 #ifndef CONFIG_SYS_LVDS_IF
 975         /* LCD option */
 976         MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
 977         MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
 978         MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
 979         MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
 980         MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
 981         MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
 982         MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
 983         MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
 984         MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
 985         MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
 986         MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
 987         MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
 988         MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
 989         MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
 990         MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
 991         MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
 992         MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
 993         MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
 994         MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
 995         MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
 996         MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
 997         MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
 998         MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
 999         MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
1000         MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
1001         MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
1002         MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
1003         MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
1004 #else
1005         /* LVDS option */
1006         MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
1007         MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
1008         MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
1009         MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
1010         MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
1011         MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
1012         MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
1013         MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
1014         MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
1015         MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
1016 #endif
1017 };
1018
1019 static const struct gpio stk5_lcd_gpios[] = {
1020         { TX53_LCD_RST_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD RESET", },
1021         { TX53_LCD_PWR_GPIO, GPIOF_OUTPUT_INIT_LOW, "LCD POWER", },
1022         { TX53_LCD_BACKLIGHT_GPIO, GPIOF_OUTPUT_INIT_HIGH, "LCD BACKLIGHT", },
1023 };
1024
1025 void lcd_ctrl_init(void *lcdbase)
1026 {
1027         int color_depth = 24;
1028         const char *video_mode = karo_get_vmode(getenv("video_mode"));
1029         const char *vm;
1030         unsigned long val;
1031         int refresh = 60;
1032         struct fb_videomode *p = &tx53_fb_modes[0];
1033         struct fb_videomode fb_mode;
1034         int xres_set = 0, yres_set = 0, bpp_set = 0, refresh_set = 0;
1035         int pix_fmt;
1036         int lcd_bus_width;
1037         ipu_di_clk_parent_t di_clk_parent = is_lvds() ? DI_PCLK_LDB : DI_PCLK_PLL3;
1038         unsigned long di_clk_rate = 65000000;
1039
1040         if (!lcd_enabled) {
1041                 debug("LCD disabled\n");
1042                 return;
1043         }
1044
1045         if (had_ctrlc() || (wrsr & WRSR_TOUT)) {
1046                 debug("Disabling LCD\n");
1047                 lcd_enabled = 0;
1048                 setenv("splashimage", NULL);
1049                 return;
1050         }
1051
1052         karo_fdt_move_fdt();
1053         lcd_bl_polarity = karo_fdt_get_backlight_polarity(working_fdt);
1054
1055         if (video_mode == NULL) {
1056                 debug("Disabling LCD\n");
1057                 lcd_enabled = 0;
1058                 return;
1059         }
1060         vm = video_mode;
1061         if (karo_fdt_get_fb_mode(working_fdt, video_mode, &fb_mode) == 0) {
1062                 p = &fb_mode;
1063                 debug("Using video mode from FDT\n");
1064                 vm += strlen(vm);
1065                 if (fb_mode.xres > panel_info.vl_col ||
1066                         fb_mode.yres > panel_info.vl_row) {
1067                         printf("video resolution from DT: %dx%d exceeds hardware limits: %dx%d\n",
1068                                 fb_mode.xres, fb_mode.yres,
1069                                 panel_info.vl_col, panel_info.vl_row);
1070                         lcd_enabled = 0;
1071                         return;
1072                 }
1073         }
1074         if (p->name != NULL)
1075                 debug("Trying compiled-in video modes\n");
1076         while (p->name != NULL) {
1077                 if (strcmp(p->name, vm) == 0) {
1078                         debug("Using video mode: '%s'\n", p->name);
1079                         vm += strlen(vm);
1080                         break;
1081                 }
1082                 p++;
1083         }
1084         if (*vm != '\0')
1085                 debug("Trying to decode video_mode: '%s'\n", vm);
1086         while (*vm != '\0') {
1087                 if (*vm >= '0' && *vm <= '9') {
1088                         char *end;
1089
1090                         val = simple_strtoul(vm, &end, 0);
1091                         if (end > vm) {
1092                                 if (!xres_set) {
1093                                         if (val > panel_info.vl_col)
1094                                                 val = panel_info.vl_col;
1095                                         p->xres = val;
1096                                         panel_info.vl_col = val;
1097                                         xres_set = 1;
1098                                 } else if (!yres_set) {
1099                                         if (val > panel_info.vl_row)
1100                                                 val = panel_info.vl_row;
1101                                         p->yres = val;
1102                                         panel_info.vl_row = val;
1103                                         yres_set = 1;
1104                                 } else if (!bpp_set) {
1105                                         switch (val) {
1106                                         case 32:
1107                                         case 24:
1108                                                 if (is_lvds())
1109                                                         pix_fmt = IPU_PIX_FMT_LVDS888;
1110                                                 /* fallthru */
1111                                         case 16:
1112                                         case 8:
1113                                                 color_depth = val;
1114                                                 break;
1115
1116                                         case 18:
1117                                                 if (is_lvds()) {
1118                                                         color_depth = val;
1119                                                         break;
1120                                                 }
1121                                                 /* fallthru */
1122                                         default:
1123                                                 printf("Invalid color depth: '%.*s' in video_mode; using default: '%u'\n",
1124                                                         end - vm, vm, color_depth);
1125                                         }
1126                                         bpp_set = 1;
1127                                 } else if (!refresh_set) {
1128                                         refresh = val;
1129                                         refresh_set = 1;
1130                                 }
1131                         }
1132                         vm = end;
1133                 }
1134                 switch (*vm) {
1135                 case '@':
1136                         bpp_set = 1;
1137                         /* fallthru */
1138                 case '-':
1139                         yres_set = 1;
1140                         /* fallthru */
1141                 case 'x':
1142                         xres_set = 1;
1143                         /* fallthru */
1144                 case 'M':
1145                 case 'R':
1146                         vm++;
1147                         break;
1148
1149                 default:
1150                         if (*vm != '\0')
1151                                 vm++;
1152                 }
1153         }
1154         if (p->xres == 0 || p->yres == 0) {
1155                 printf("Invalid video mode: %s\n", getenv("video_mode"));
1156                 lcd_enabled = 0;
1157                 printf("Supported video modes are:");
1158                 for (p = &tx53_fb_modes[0]; p->name != NULL; p++) {
1159                         printf(" %s", p->name);
1160                 }
1161                 printf("\n");
1162                 return;
1163         }
1164         if (p->xres > panel_info.vl_col || p->yres > panel_info.vl_row) {
1165                 printf("video resolution: %dx%d exceeds hardware limits: %dx%d\n",
1166                         p->xres, p->yres, panel_info.vl_col, panel_info.vl_row);
1167                 lcd_enabled = 0;
1168                 return;
1169         }
1170         panel_info.vl_col = p->xres;
1171         panel_info.vl_row = p->yres;
1172
1173         switch (color_depth) {
1174         case 8:
1175                 panel_info.vl_bpix = LCD_COLOR8;
1176                 break;
1177         case 16:
1178                 panel_info.vl_bpix = LCD_COLOR16;
1179                 break;
1180         default:
1181                 panel_info.vl_bpix = LCD_COLOR24;
1182         }
1183
1184         p->pixclock = KHZ2PICOS(refresh *
1185                 (p->xres + p->left_margin + p->right_margin + p->hsync_len) *
1186                 (p->yres + p->upper_margin + p->lower_margin + p->vsync_len) /
1187                                 1000);
1188         debug("Pixel clock set to %lu.%03lu MHz\n",
1189                 PICOS2KHZ(p->pixclock) / 1000, PICOS2KHZ(p->pixclock) % 1000);
1190
1191         if (p != &fb_mode) {
1192                 int ret;
1193
1194                 debug("Creating new display-timing node from '%s'\n",
1195                         video_mode);
1196                 ret = karo_fdt_create_fb_mode(working_fdt, video_mode, p);
1197                 if (ret)
1198                         printf("Failed to create new display-timing node from '%s': %d\n",
1199                                 video_mode, ret);
1200         }
1201
1202         gpio_request_array(stk5_lcd_gpios, ARRAY_SIZE(stk5_lcd_gpios));
1203         imx_iomux_v3_setup_multiple_pads(stk5_lcd_pads,
1204                                         ARRAY_SIZE(stk5_lcd_pads));
1205
1206         lcd_bus_width = karo_fdt_get_lcd_bus_width(working_fdt, 24);
1207         switch (lcd_bus_width) {
1208         case 24:
1209                 pix_fmt = is_lvds() ? IPU_PIX_FMT_LVDS888 : IPU_PIX_FMT_RGB24;
1210                 break;
1211
1212         case 18:
1213                 pix_fmt = is_lvds() ? IPU_PIX_FMT_LVDS666 : IPU_PIX_FMT_RGB666;
1214                 break;
1215
1216         case 16:
1217                 if (!is_lvds()) {
1218                         pix_fmt = IPU_PIX_FMT_RGB565;
1219                         break;
1220                 }
1221                 /* fallthru */
1222         default:
1223                 lcd_enabled = 0;
1224                 printf("Invalid %s bus width: %d\n", is_lvds() ? "LVDS" : "LCD",
1225                         lcd_bus_width);
1226                 return;
1227         }
1228         if (is_lvds()) {
1229                 int lvds_mapping = karo_fdt_get_lvds_mapping(working_fdt, 0);
1230                 int lvds_chan_mask = karo_fdt_get_lvds_channels(working_fdt);
1231                 uint32_t gpr2;
1232
1233                 if (lvds_chan_mask == 0) {
1234                         printf("No LVDS channel active\n");
1235                         lcd_enabled = 0;
1236                         return;
1237                 }
1238
1239                 gpr2 = (lvds_mapping << 6) | (lvds_mapping << 8);
1240                 if (lcd_bus_width == 24)
1241                         gpr2 |= (1 << 5) | (1 << 7);
1242                 gpr2 |= (lvds_chan_mask & 1) ? 1 << 0 : 0;
1243                 gpr2 |= (lvds_chan_mask & 2) ? 3 << 2 : 0;
1244                 debug("writing %08x to GPR2[%08x]\n", gpr2, IOMUXC_BASE_ADDR + 8);
1245                 writel(gpr2, IOMUXC_BASE_ADDR + 8);
1246         }
1247         if (karo_load_splashimage(0) == 0) {
1248                 int ret;
1249
1250                 gd->arch.ipu_hw_rev = IPUV3_HW_REV_IPUV3M;
1251
1252                 debug("Initializing LCD controller\n");
1253                 ret = ipuv3_fb_init(p, 0, pix_fmt, di_clk_parent, di_clk_rate, -1);
1254                 if (ret) {
1255                         printf("Failed to initialize FB driver: %d\n", ret);
1256                         lcd_enabled = 0;
1257                 }
1258         } else {
1259                 debug("Skipping initialization of LCD controller\n");
1260         }
1261 }
1262 #else
1263 #define lcd_enabled 0
1264 #endif /* CONFIG_LCD */
1265
1266 static void stk5_board_init(void)
1267 {
1268         gpio_request_array(stk5_gpios, ARRAY_SIZE(stk5_gpios));
1269         imx_iomux_v3_setup_multiple_pads(stk5_pads, ARRAY_SIZE(stk5_pads));
1270 }
1271
1272 static void stk5v3_board_init(void)
1273 {
1274         stk5_board_init();
1275 }
1276
1277 static void stk5v5_board_init(void)
1278 {
1279         stk5_board_init();
1280
1281         gpio_request_one(IMX_GPIO_NR(4, 21), GPIOF_OUTPUT_INIT_HIGH,
1282                         "Flexcan Transceiver");
1283         imx_iomux_v3_setup_pad(MX53_PAD_DISP0_DAT0__GPIO4_21);
1284 }
1285
1286 static void tx53_set_cpu_clock(void)
1287 {
1288         unsigned long cpu_clk = getenv_ulong("cpu_clk", 10, 0);
1289
1290         if (had_ctrlc() || (wrsr & WRSR_TOUT))
1291                 return;
1292
1293         if (cpu_clk == 0 || cpu_clk == mxc_get_clock(MXC_ARM_CLK) / 1000000)
1294                 return;
1295
1296         if (mxc_set_clock(CONFIG_SYS_MX5_HCLK, cpu_clk, MXC_ARM_CLK) == 0) {
1297                 cpu_clk = mxc_get_clock(MXC_ARM_CLK);
1298                 printf("CPU clock set to %lu.%03lu MHz\n",
1299                         cpu_clk / 1000000, cpu_clk / 1000 % 1000);
1300         } else {
1301                 printf("Error: Failed to set CPU clock to %lu MHz\n", cpu_clk);
1302         }
1303 }
1304
1305 static void tx53_init_mac(void)
1306 {
1307         u8 mac[ETH_ALEN];
1308
1309         imx_get_mac_from_fuse(0, mac);
1310         if (!is_valid_ether_addr(mac)) {
1311                 printf("No valid MAC address programmed\n");
1312                 return;
1313         }
1314
1315         printf("MAC addr from fuse: %pM\n", mac);
1316         eth_setenv_enetaddr("ethaddr", mac);
1317 }
1318
1319 int board_late_init(void)
1320 {
1321         int ret = 0;
1322         const char *baseboard;
1323
1324         tx53_set_cpu_clock();
1325         karo_fdt_move_fdt();
1326
1327         baseboard = getenv("baseboard");
1328         if (!baseboard)
1329                 goto exit;
1330
1331         printf("Baseboard: %s\n", baseboard);
1332
1333         if (strncmp(baseboard, "stk5", 4) == 0) {
1334                 if ((strlen(baseboard) == 4) ||
1335                         strcmp(baseboard, "stk5-v3") == 0) {
1336                         stk5v3_board_init();
1337                 } else if (strcmp(baseboard, "stk5-v5") == 0) {
1338                         const char *otg_mode = getenv("otg_mode");
1339
1340                         if (otg_mode && strcmp(otg_mode, "host") == 0) {
1341                                 printf("otg_mode='%s' is incompatible with baseboard %s; setting to 'none'\n",
1342                                         otg_mode, baseboard);
1343                                 setenv("otg_mode", "none");
1344                         }
1345                         stk5v5_board_init();
1346                 } else {
1347                         printf("WARNING: Unsupported STK5 board rev.: %s\n",
1348                                 baseboard + 4);
1349                 }
1350         } else {
1351                 printf("WARNING: Unsupported baseboard: '%s'\n",
1352                         baseboard);
1353                 ret = -EINVAL;
1354         }
1355
1356 exit:
1357         tx53_init_mac();
1358
1359         gpio_set_value(TX53_RESET_OUT_GPIO, 1);
1360         clear_ctrlc();
1361         return ret;
1362 }
1363
1364 int checkboard(void)
1365 {
1366         tx53_print_cpuinfo();
1367 #if CONFIG_SYS_SDRAM_SIZE < SZ_1G
1368         printf("Board: Ka-Ro TX53-8%d3%c\n",
1369                 is_lvds(), '0' + CONFIG_SYS_SDRAM_SIZE / SZ_1G);
1370 #else
1371         printf("Board: Ka-Ro TX53-1%d31\n", is_lvds() + 2);
1372 #endif
1373         return 0;
1374 }
1375
1376 #if defined(CONFIG_OF_BOARD_SETUP)
1377 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
1378 #include <jffs2/jffs2.h>
1379 #include <mtd_node.h>
1380 static struct node_info nodes[] = {
1381         { "fsl,imx53-nand", MTD_DEV_TYPE_NAND, },
1382 };
1383 #else
1384 #define fdt_fixup_mtdparts(b,n,c) do { } while (0)
1385 #endif
1386
1387 #ifdef CONFIG_SYS_TX53_HWREV_2
1388 static void tx53_fixup_rtc(void *blob)
1389 {
1390         karo_fdt_del_prop(blob, "dallas,ds1339", 0x68, "interrupt-parent");
1391         karo_fdt_del_prop(blob, "dallas,ds1339", 0x68, "interrupts");
1392 }
1393 #else
1394 static inline void tx53_fixup_rtc(void *blob)
1395 {
1396 }
1397 #endif /* CONFIG_SYS_TX53_HWREV_2 */
1398
1399 static const char *tx53_touchpanels[] = {
1400         "ti,tsc2007",
1401         "edt,edt-ft5x06",
1402         "eeti,egalax_ts",
1403 };
1404
1405 void ft_board_setup(void *blob, bd_t *bd)
1406 {
1407         const char *baseboard = getenv("baseboard");
1408         int stk5_v5 = baseboard != NULL && (strcmp(baseboard, "stk5-v5") == 0);
1409         const char *video_mode = karo_get_vmode(getenv("video_mode"));
1410         int ret;
1411
1412         ret = fdt_increase_size(blob, 4096);
1413         if (ret)
1414                 printf("Failed to increase FDT size: %s\n", fdt_strerror(ret));
1415
1416         if (stk5_v5)
1417                 karo_fdt_enable_node(blob, "stk5led", 0);
1418
1419         fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
1420         fdt_fixup_ethernet(blob);
1421
1422         karo_fdt_fixup_touchpanel(blob, tx53_touchpanels,
1423                                 ARRAY_SIZE(tx53_touchpanels));
1424         karo_fdt_fixup_usb_otg(blob, "usbotg", "fsl,usbphy", "vbus-supply");
1425         karo_fdt_fixup_flexcan(blob, stk5_v5);
1426         tx53_fixup_rtc(blob);
1427         karo_fdt_update_fb_mode(blob, video_mode);
1428 }
1429 #endif /* CONFIG_OF_BOARD_SETUP */