board/samsung/origen/origen.c

   1 /*
   2  * Copyright (C) 2011 Samsung Electronics
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #include <common.h>
   8 #include <asm/io.h>
   9 #include <asm/arch/cpu.h>
  10 #include <asm/arch/gpio.h>
  11 #include <asm/arch/mmc.h>
  12 #include <asm/arch/periph.h>
  13 #include <asm/arch/pinmux.h>
  14
  15 DECLARE_GLOBAL_DATA_PTR;
  16 struct exynos4_gpio_part1 *gpio1;
  17 struct exynos4_gpio_part2 *gpio2;
  18
  19 int board_init(void)
  20 {
  21         gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
  22         gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
  23
  24         gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
  25         return 0;
  26 }
  27
  28 static int board_uart_init(void)
  29 {
  30         int err;
  31
  32         err = exynos_pinmux_config(PERIPH_ID_UART0, PINMUX_FLAG_NONE);
  33         if (err) {
  34                 debug("UART0 not configured\n");
  35                 return err;
  36         }
  37
  38         err = exynos_pinmux_config(PERIPH_ID_UART1, PINMUX_FLAG_NONE);
  39         if (err) {
  40                 debug("UART1 not configured\n");
  41                 return err;
  42         }
  43
  44         err = exynos_pinmux_config(PERIPH_ID_UART2, PINMUX_FLAG_NONE);
  45         if (err) {
  46                 debug("UART2 not configured\n");
  47                 return err;
  48         }
  49
  50         err = exynos_pinmux_config(PERIPH_ID_UART3, PINMUX_FLAG_NONE);
  51         if (err) {
  52                 debug("UART3 not configured\n");
  53                 return err;
  54         }
  55
  56         return 0;
  57 }
  58
  59 #ifdef CONFIG_BOARD_EARLY_INIT_F
  60 int board_early_init_f(void)
  61 {
  62         int err;
  63         err = board_uart_init();
  64         if (err) {
  65                 debug("UART init failed\n");
  66                 return err;
  67         }
  68         return err;
  69 }
  70 #endif
  71
  72 int dram_init(void)
  73 {
  74         gd->ram_size    = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
  75                         + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
  76                         + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
  77                         + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
  78
  79         return 0;
  80 }
  81
  82 void dram_init_banksize(void)
  83 {
  84         gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
  85         gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
  86                                                         PHYS_SDRAM_1_SIZE);
  87         gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
  88         gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
  89                                                         PHYS_SDRAM_2_SIZE);
  90         gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
  91         gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
  92                                                         PHYS_SDRAM_3_SIZE);
  93         gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
  94         gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
  95                                                         PHYS_SDRAM_4_SIZE);
  96 }
  97
  98 #ifdef CONFIG_DISPLAY_BOARDINFO
  99 int checkboard(void)
 100 {
 101         printf("\nBoard: ORIGEN\n");
 102         return 0;
 103 }
 104 #endif
 105
 106 #ifdef CONFIG_GENERIC_MMC
 107 int board_mmc_init(bd_t *bis)
 108 {
 109         int i, err;
 110
 111         /*
 112          * MMC2 SD card GPIO:
 113          *
 114          * GPK2[0]      SD_2_CLK(2)
 115          * GPK2[1]      SD_2_CMD(2)
 116          * GPK2[2]      SD_2_CDn
 117          * GPK2[3:6]    SD_2_DATA[0:3](2)
 118          */
 119         for (i = 0; i < 7; i++) {
 120                 /* GPK2[0:6] special function 2 */
 121                 s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
 122
 123                 /* GPK2[0:6] drv 4x */
 124                 s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
 125
 126                 /* GPK2[0:1] pull disable */
 127                 if (i == 0 || i == 1) {
 128                         s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
 129                         continue;
 130                 }
 131
 132                 /* GPK2[2:6] pull up */
 133                 s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
 134         }
 135
 136         err = s5p_mmc_init(2, 4);
 137         return err;
 138 }
 139 #endif