]> git.karo-electronics.de Git - karo-tx-uboot.git/blob - drivers/fpga/cyclon2.c
imported Ka-Ro specific additions to U-Boot 2009.08 for TX28
[karo-tx-uboot.git] / drivers / fpga / cyclon2.c
1 /*
2  * (C) Copyright 2006
3  * Heiko Schocher, hs@denx.de
4  * Based on ACE1XK.c
5  *
6  * See file CREDITS for list of people who contributed to this
7  * project.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of
12  * the License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22  * MA 02111-1307 USA
23  *
24  */
25
26 #include <common.h>             /* core U-Boot definitions */
27 #include <altera.h>
28 #include <ACEX1K.h>             /* ACEX device family */
29
30 /* Define FPGA_DEBUG to get debug printf's */
31 #ifdef  FPGA_DEBUG
32 #define PRINTF(fmt,args...)     printf (fmt ,##args)
33 #else
34 #define PRINTF(fmt,args...)
35 #endif
36
37 /* Note: The assumption is that we cannot possibly run fast enough to
38  * overrun the device (the Slave Parallel mode can free run at 50MHz).
39  * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
40  * the board config file to slow things down.
41  */
42 #ifndef CONFIG_FPGA_DELAY
43 #define CONFIG_FPGA_DELAY()
44 #endif
45
46 #ifndef CONFIG_SYS_FPGA_WAIT
47 #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10           /* 100 ms */
48 #endif
49
50 static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
51 static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
52 /* static int CYC2_ps_info( Altera_desc *desc ); */
53 static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
54
55 /* ------------------------------------------------------------------------- */
56 /* CYCLON2 Generic Implementation */
57 int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
58 {
59         int ret_val = FPGA_FAIL;
60
61         switch (desc->iface) {
62         case passive_serial:
63                 PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
64                 ret_val = CYC2_ps_load (desc, buf, bsize);
65                 break;
66
67                 /* Add new interface types here */
68
69         default:
70                 printf ("%s: Unsupported interface type, %d\n",
71                                 __FUNCTION__, desc->iface);
72         }
73
74         return ret_val;
75 }
76
77 int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
78 {
79         int ret_val = FPGA_FAIL;
80
81         switch (desc->iface) {
82         case passive_serial:
83                 PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
84                 ret_val = CYC2_ps_dump (desc, buf, bsize);
85                 break;
86
87                 /* Add new interface types here */
88
89         default:
90                 printf ("%s: Unsupported interface type, %d\n",
91                                 __FUNCTION__, desc->iface);
92         }
93
94         return ret_val;
95 }
96
97 int CYC2_info( Altera_desc *desc )
98 {
99         return FPGA_SUCCESS;
100 }
101
102 int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
103 {
104         int ret_val = FPGA_FAIL;        /* assume a failure */
105
106         if (desc->family != Altera_CYC2) {
107                 printf ("%s: Unsupported family type, %d\n",
108                                 __FUNCTION__, desc->family);
109                 return FPGA_FAIL;
110         } else
111                 switch (desc->iface) {
112                 case passive_serial:
113                         ret_val = CYC2_ps_reloc (desc, reloc_offset);
114                         break;
115
116                 /* Add new interface types here */
117
118                 default:
119                         printf ("%s: Unsupported interface type, %d\n",
120                                         __FUNCTION__, desc->iface);
121                 }
122
123         return ret_val;
124 }
125
126 /* ------------------------------------------------------------------------- */
127 /* CYCLON2 Passive Serial Generic Implementation                                  */
128 static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
129 {
130         int ret_val = FPGA_FAIL;        /* assume the worst */
131         Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
132         int     ret = 0;
133
134         PRINTF ("%s: start with interface functions @ 0x%p\n",
135                         __FUNCTION__, fn);
136
137         if (fn) {
138                 int cookie = desc->cookie;      /* make a local copy */
139                 unsigned long ts;               /* timestamp */
140
141                 PRINTF ("%s: Function Table:\n"
142                                 "ptr:\t0x%p\n"
143                                 "struct: 0x%p\n"
144                                 "config:\t0x%p\n"
145                                 "status:\t0x%p\n"
146                                 "write:\t0x%p\n"
147                                 "done:\t0x%p\n\n",
148                                 __FUNCTION__, &fn, fn, fn->config, fn->status,
149                                 fn->write, fn->done);
150 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
151                 printf ("Loading FPGA Device %d...", cookie);
152 #endif
153
154                 /*
155                  * Run the pre configuration function if there is one.
156                  */
157                 if (*fn->pre) {
158                         (*fn->pre) (cookie);
159                 }
160
161                 /* Establish the initial state */
162                 (*fn->config) (TRUE, TRUE, cookie);     /* Assert nCONFIG */
163
164                 udelay(2);              /* T_cfg > 2us  */
165
166                 /* Wait for nSTATUS to be asserted */
167                 ts = get_timer (0);             /* get current time */
168                 do {
169                         CONFIG_FPGA_DELAY ();
170                         if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) {    /* check the time */
171                                 puts ("** Timeout waiting for STATUS to go high.\n");
172                                 (*fn->abort) (cookie);
173                                 return FPGA_FAIL;
174                         }
175                 } while (!(*fn->status) (cookie));
176
177                 /* Get ready for the burn */
178                 CONFIG_FPGA_DELAY ();
179
180                 ret = (*fn->write) (buf, bsize, TRUE, cookie);
181                 if (ret) {
182                         puts ("** Write failed.\n");
183                         (*fn->abort) (cookie);
184                         return FPGA_FAIL;
185                 }
186 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
187                 puts(" OK? ...");
188 #endif
189
190                 CONFIG_FPGA_DELAY ();
191
192 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
193                 putc (' ');                     /* terminate the dotted line */
194 #endif
195
196         /*
197          * Checking FPGA's CONF_DONE signal - correctly booted ?
198          */
199
200         if ( ! (*fn->done) (cookie) ) {
201                 puts ("** Booting failed! CONF_DONE is still deasserted.\n");
202                 (*fn->abort) (cookie);
203                 return (FPGA_FAIL);
204         }
205 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
206         puts(" OK\n");
207 #endif
208
209         ret_val = FPGA_SUCCESS;
210
211 #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
212         if (ret_val == FPGA_SUCCESS) {
213                 puts ("Done.\n");
214         }
215         else {
216                 puts ("Fail.\n");
217         }
218 #endif
219         (*fn->post) (cookie);
220
221         } else {
222                 printf ("%s: NULL Interface function table!\n", __FUNCTION__);
223         }
224
225         return ret_val;
226 }
227
228 static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
229 {
230         /* Readback is only available through the Slave Parallel and         */
231         /* boundary-scan interfaces.                                         */
232         printf ("%s: Passive Serial Dumping is unavailable\n",
233                         __FUNCTION__);
234         return FPGA_FAIL;
235 }
236
237 static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
238 {
239         int ret_val = FPGA_FAIL;        /* assume the worst */
240         Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
241                         (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
242
243         if (fn) {
244                 ulong addr;
245
246                 /* Get the relocated table address */
247                 addr = (ulong) fn + reloc_offset;
248                 fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
249
250                 if (!fn_r->relocated) {
251
252                         if (memcmp (fn_r, fn,
253                                                 sizeof (Altera_CYC2_Passive_Serial_fns))
254                                 == 0) {
255                                 /* good copy of the table, fix the descriptor pointer */
256                                 desc->iface_fns = fn_r;
257                         } else {
258                                 PRINTF ("%s: Invalid function table at 0x%p\n",
259                                                 __FUNCTION__, fn_r);
260                                 return FPGA_FAIL;
261                         }
262
263                         PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
264                                         desc);
265
266                         addr = (ulong) (fn->pre) + reloc_offset;
267                         fn_r->pre = (Altera_pre_fn) addr;
268
269                         addr = (ulong) (fn->config) + reloc_offset;
270                         fn_r->config = (Altera_config_fn) addr;
271
272                         addr = (ulong) (fn->status) + reloc_offset;
273                         fn_r->status = (Altera_status_fn) addr;
274
275                         addr = (ulong) (fn->done) + reloc_offset;
276                         fn_r->done = (Altera_done_fn) addr;
277
278                         addr = (ulong) (fn->write) + reloc_offset;
279                         fn_r->write = (Altera_write_fn) addr;
280
281                         addr = (ulong) (fn->abort) + reloc_offset;
282                         fn_r->abort = (Altera_abort_fn) addr;
283
284                         addr = (ulong) (fn->post) + reloc_offset;
285                         fn_r->post = (Altera_post_fn) addr;
286
287                         fn_r->relocated = TRUE;
288
289                 } else {
290                         /* this table has already been moved */
291                         /* XXX - should check to see if the descriptor is correct */
292                         desc->iface_fns = fn_r;
293                 }
294
295                 ret_val = FPGA_SUCCESS;
296         } else {
297                 printf ("%s: NULL Interface function table!\n", __FUNCTION__);
298         }
299
300         return ret_val;
301 }