include/configs/m28evk.h

   1 /*
   2  * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
   3  * on behalf of DENX Software Engineering GmbH
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  18  * MA 02111-1307 USA
  19  */
  20 #ifndef __M28EVK_CONFIG_H__
  21 #define __M28EVK_CONFIG_H__
  22
  23 #include <asm/arch/regs-base.h>
  24
  25 /*
  26  * SoC configurations
  27  */
  28 #define CONFIG_MX28                             /* i.MX28 SoC */
  29 #define CONFIG_MXS_GPIO                         /* GPIO control */
  30 #define CONFIG_SYS_HZ           1000            /* Ticks per second */
  31
  32 /*
  33  * Define M28EVK machine type by hand until it lands in mach-types
  34  */
  35 #define MACH_TYPE_M28EVK        3613
  36
  37 #define CONFIG_MACH_TYPE        MACH_TYPE_M28EVK
  38
  39 #define CONFIG_SYS_NO_FLASH
  40 #define CONFIG_SYS_ICACHE_OFF
  41 #define CONFIG_SYS_DCACHE_OFF
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #define CONFIG_ARCH_CPU_INIT
  44 #define CONFIG_ARCH_MISC_INIT
  45
  46 #define CONFIG_OF_LIBFDT
  47
  48 /*
  49  * SPL
  50  */
  51 #define CONFIG_SPL
  52 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
  53 #define CONFIG_SPL_START_S_PATH         "arch/arm/cpu/arm926ejs/mx28"
  54 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
  55 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  56 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  57 #define CONFIG_SPL_GPIO_SUPPORT
  58
  59 /*
  60  * U-Boot Commands
  61  */
  62 #include <config_cmd_default.h>
  63 #define CONFIG_DISPLAY_CPUINFO
  64 #define CONFIG_DOS_PARTITION
  65
  66 #define CONFIG_CMD_CACHE
  67 #define CONFIG_CMD_DATE
  68 #define CONFIG_CMD_DHCP
  69 #define CONFIG_CMD_EEPROM
  70 #define CONFIG_CMD_EXT2
  71 #define CONFIG_CMD_FAT
  72 #define CONFIG_CMD_GPIO
  73 #define CONFIG_CMD_I2C
  74 #define CONFIG_CMD_MII
  75 #define CONFIG_CMD_MMC
  76 #define CONFIG_CMD_NAND
  77 #define CONFIG_CMD_NET
  78 #define CONFIG_CMD_NFS
  79 #define CONFIG_CMD_PING
  80 #define CONFIG_CMD_SETEXPR
  81 #define CONFIG_CMD_SF
  82 #define CONFIG_CMD_SPI
  83 #define CONFIG_CMD_USB
  84
  85 /*
  86  * Memory configurations
  87  */
  88 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  89 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  90 #define PHYS_SDRAM_1_SIZE               0x20000000      /* Max 512 MB RAM */
  91 #define CONFIG_STACKSIZE                0x00010000      /* 128 KB stack */
  92 #define CONFIG_SYS_MALLOC_LEN           0x00400000      /* 4 MB for malloc */
  93 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* Initial data */
  94 #define CONFIG_SYS_MEMTEST_START        0x40000000      /* Memtest start adr */
  95 #define CONFIG_SYS_MEMTEST_END          0x40400000      /* 4 MB RAM test */
  96 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  97 /* Point initial SP in SRAM so SPL can use it too. */
  98
  99 #define CONFIG_SYS_INIT_RAM_ADDR        0x00000000
 100 #define CONFIG_SYS_INIT_RAM_SIZE        (128 * 1024)
 101
 102 #define CONFIG_SYS_INIT_SP_OFFSET \
 103         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 104 #define CONFIG_SYS_INIT_SP_ADDR \
 105         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 106 /*
 107  * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
 108  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
 109  * binary. In case there was more of this mess, 0x100 bytes are skipped.
 110  */
 111 #define CONFIG_SYS_TEXT_BASE            0x40000100
 112
 113 /*
 114  * U-Boot general configurations
 115  */
 116 #define CONFIG_SYS_LONGHELP
 117 #define CONFIG_SYS_PROMPT       "=> "
 118 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
 119 #define CONFIG_SYS_PBSIZE       \
 120         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 121                                                 /* Print buffer size */
 122 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
 123 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 124                                                 /* Boot argument buffer size */
 125 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
 126 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
 127 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
 128 #define CONFIG_SYS_HUSH_PARSER
 129
 130 /*
 131  * Serial Driver
 132  */
 133 #define CONFIG_PL011_SERIAL
 134 #define CONFIG_PL011_CLOCK              24000000
 135 #define CONFIG_PL01x_PORTS              { (void *)MXS_UARTDBG_BASE }
 136 #define CONFIG_CONS_INDEX               0
 137 #define CONFIG_BAUDRATE                 115200  /* Default baud rate */
 138
 139 /*
 140  * MMC Driver
 141  */
 142 #ifdef  CONFIG_CMD_MMC
 143 #define CONFIG_MMC
 144 #define CONFIG_MMC_BOUNCE_BUFFER
 145 #define CONFIG_GENERIC_MMC
 146 #define CONFIG_MXS_MMC
 147 #endif
 148
 149 /*
 150  * APBH DMA
 151  */
 152 #define CONFIG_APBH_DMA
 153
 154 /*
 155  * NAND
 156  */
 157 #define CONFIG_ENV_SIZE                 (16 * 1024)
 158 #ifdef  CONFIG_CMD_NAND
 159 #define CONFIG_NAND_MXS
 160 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 161 #define CONFIG_SYS_NAND_BASE            0x60000000
 162 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 163
 164 /* Environment is in NAND */
 165 #define CONFIG_ENV_IS_IN_NAND
 166 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 167 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 168 #define CONFIG_ENV_RANGE                (512 * 1024)
 169 #define CONFIG_ENV_OFFSET               0x300000
 170 #define CONFIG_ENV_OFFSET_REDUND        \
 171                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 172
 173 #define CONFIG_CMD_UBI
 174 #define CONFIG_CMD_UBIFS
 175 #define CONFIG_CMD_MTDPARTS
 176 #define CONFIG_RBTREE
 177 #define CONFIG_LZO
 178 #define CONFIG_MTD_DEVICE
 179 #define CONFIG_MTD_PARTITIONS
 180 #define MTDIDS_DEFAULT                  "nand0=gpmi-nand.0"
 181 #define MTDPARTS_DEFAULT                        \
 182         "mtdparts=gpmi-nand.0:"                 \
 183                 "3m(bootloader)ro,"             \
 184                 "512k(environment),"            \
 185                 "512k(redundant-environment),"  \
 186                 "4m(kernel),"                   \
 187                 "-(filesystem)"
 188 #else
 189 #define CONFIG_ENV_IS_NOWHERE
 190 #endif
 191
 192 /*
 193  * Ethernet on SOC (FEC)
 194  */
 195 #ifdef  CONFIG_CMD_NET
 196 #define CONFIG_ETHPRIME                 "FEC0"
 197 #define CONFIG_FEC_MXC
 198 #define CONFIG_FEC_MXC_MULTI
 199 #define CONFIG_MII
 200 #define CONFIG_DISCOVER_PHY
 201 #define CONFIG_FEC_XCV_TYPE             RMII
 202 #endif
 203
 204 /*
 205  * I2C
 206  */
 207 #ifdef  CONFIG_CMD_I2C
 208 #define CONFIG_I2C_MXS
 209 #define CONFIG_HARD_I2C
 210 #define CONFIG_SYS_I2C_SPEED            400000
 211 #endif
 212
 213 /*
 214  * EEPROM
 215  */
 216 #ifdef  CONFIG_CMD_EEPROM
 217 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 218 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 219 #endif
 220
 221 /*
 222  * RTC
 223  */
 224 #ifdef  CONFIG_CMD_DATE
 225 /* Use the internal RTC in the MXS chip */
 226 #define CONFIG_RTC_INTERNAL
 227 #ifdef  CONFIG_RTC_INTERNAL
 228 #define CONFIG_RTC_MXS
 229 #else
 230 #define CONFIG_RTC_M41T62
 231 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 232 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 233 #endif
 234 #endif
 235
 236 /*
 237  * USB
 238  */
 239 #ifdef  CONFIG_CMD_USB
 240 #define CONFIG_USB_EHCI
 241 #define CONFIG_USB_EHCI_MXS
 242 #define CONFIG_EHCI_MXS_PORT            1
 243 #define CONFIG_EHCI_IS_TDI
 244 #define CONFIG_USB_STORAGE
 245 #endif
 246
 247 /*
 248  * SPI
 249  */
 250 #ifdef  CONFIG_CMD_SPI
 251 #define CONFIG_HARD_SPI
 252 #define CONFIG_MXS_SPI
 253 #define CONFIG_SPI_HALF_DUPLEX
 254 #define CONFIG_DEFAULT_SPI_BUS          2
 255 #define CONFIG_DEFAULT_SPI_MODE         SPI_MODE_0
 256
 257 /* SPI FLASH */
 258 #ifdef  CONFIG_CMD_SF
 259 #define CONFIG_SPI_FLASH
 260 #define CONFIG_SPI_FLASH_STMICRO
 261 #define CONFIG_SF_DEFAULT_CS            2
 262 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 263 #define CONFIG_SF_DEFAULT_SPEED         24000000
 264
 265 #define CONFIG_ENV_SPI_CS               0
 266 #define CONFIG_ENV_SPI_BUS              2
 267 #define CONFIG_ENV_SPI_MAX_HZ           24000000
 268 #define CONFIG_ENV_SPI_MODE             SPI_MODE_0
 269 #endif
 270 #endif
 271
 272 /*
 273  * Boot Linux
 274  */
 275 #define CONFIG_CMDLINE_TAG
 276 #define CONFIG_SETUP_MEMORY_TAGS
 277 #define CONFIG_BOOTDELAY        3
 278 #define CONFIG_BOOTFILE         "uImage"
 279 #define CONFIG_BOOTARGS         "console=ttyAM0,115200n8 "
 280 #define CONFIG_BOOTCOMMAND      "run bootcmd_net"
 281 #define CONFIG_LOADADDR         0x42000000
 282 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 283 #define CONFIG_OF_LIBFDT
 284
 285 /*
 286  * Extra Environments
 287  */
 288 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 289         "update_nand_full_filename=u-boot.nand\0"                       \
 290         "update_nand_firmware_filename=u-boot.sb\0"                     \
 291         "update_sd_firmware_filename=u-boot.sd\0"                       \
 292         "update_nand_firmware_maxsz=0x100000\0"                         \
 293         "update_nand_stride=0x40\0"     /* MX28 datasheet ch. 12.12 */  \
 294         "update_nand_count=0x4\0"       /* MX28 datasheet ch. 12.12 */  \
 295         "update_nand_get_fcb_size="     /* Get size of FCB blocks */    \
 296                 "nand device 0 ; "                                      \
 297                 "nand info ; "                                          \
 298                 "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
 299                 "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
 300         "update_nand_full="             /* Update FCB, DBBT and FW */   \
 301                 "if tftp ${update_nand_full_filename} ; then "          \
 302                 "run update_nand_get_fcb_size ; "                       \
 303                 "nand scrub -y 0x0 ${filesize} ; "                      \
 304                 "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; "  \
 305                 "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
 306                 "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
 307                 "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
 308                 "fi\0"                                                  \
 309         "update_nand_firmware="         /* Update only firmware */      \
 310                 "if tftp ${update_nand_firmware_filename} ; then "      \
 311                 "run update_nand_get_fcb_size ; "                       \
 312                 "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
 313                 "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "    \
 314                 "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
 315                 "nand erase ${fcb_sz} ${fw_sz} ; "                      \
 316                 "nand write ${loadaddr} ${fcb_sz} ${filesize} ; "       \
 317                 "nand write ${loadaddr} ${fw_off} ${filesize} ; "       \
 318                 "fi\0"                                                  \
 319         "update_sd_firmware="           /* Update the SD firmware partition */ \
 320                 "if mmc rescan ; then "                                 \
 321                 "if tftp ${update_sd_firmware_filename} ; then "        \
 322                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
 323                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
 324                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; "               \
 325                 "fi ; "                                                 \
 326                 "fi\0"
 327
 328 #endif /* __M28EVK_CONFIG_H__ */