include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/imx-common/gpio.h>
  15
  16 /* General configuration */
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO_LATE
  19 #define CONFIG_SYS_THUMB_BUILD
  20
  21 #define CONFIG_MACH_TYPE                3980
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_SYS_GENERIC_BOARD
  28
  29 #define CONFIG_BOARD_EARLY_INIT_F
  30 #define CONFIG_MXC_GPIO
  31 #define CONFIG_CMD_GPIO
  32
  33 #define CONFIG_SYS_LONGHELP
  34 #define CONFIG_SYS_HUSH_PARSER
  35 #define CONFIG_SYS_PROMPT               "Matrix U-Boot> "
  36 #define CONFIG_BOOTDELAY                3
  37 #define CONFIG_AUTO_COMPLETE
  38 #define CONFIG_CMDLINE_EDITING
  39 #define CONFIG_SYS_MAXARGS              16
  40 #define CONFIG_SYS_CBSIZE               1024
  41 #define CONFIG_SYS_HZ                   1000
  42
  43 /* Physical Memory Map */
  44 #define CONFIG_NR_DRAM_BANKS            1
  45 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  46
  47 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  48 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  49 #define CONFIG_SYS_INIT_SP_OFFSET \
  50         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  51 #define CONFIG_SYS_INIT_SP_ADDR \
  52         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  53
  54 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  55
  56 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  57 #define CONFIG_SYS_MEMTEST_END \
  58         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  59
  60 #define CONFIG_SYS_TEXT_BASE            0x80000000
  61 #define CONFIG_SYS_BOOTMAPSZ            0x6C000000
  62 #define CONFIG_SYS_LOAD_ADDR            0x10800000
  63
  64 /* Serial console */
  65 #define CONFIG_MXC_UART
  66 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  67 #define CONFIG_BAUDRATE                 115200
  68
  69 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  70 #define CONFIG_CONSOLE_MUX
  71 #define CONFIG_CONS_INDEX               1
  72
  73 /* *** Command definition *** */
  74 #include <config_cmd_default.h>
  75
  76 #undef CONFIG_CMD_IMLS
  77
  78 #define CONFIG_CMD_BMODE
  79 #define CONFIG_CMD_SETEXPR
  80 #define CONFIG_CMD_MEMTEST
  81 #define CONFIG_CMD_TIME
  82
  83 /* Filesystems / image support */
  84 #define CONFIG_CMD_EXT4
  85 #define CONFIG_CMD_FAT
  86 #define CONFIG_DOS_PARTITION
  87 #define CONFIG_EFI_PARTITION
  88 #define CONFIG_CMD_FS_GENERIC
  89
  90 #define CONFIG_OF_LIBFDT
  91 #define CONFIG_CMD_BOOTZ
  92 #define CONFIG_SUPPORT_RAW_INITRD
  93 #define CONFIG_FIT
  94
  95 /* MMC */
  96 #define CONFIG_FSL_ESDHC
  97 #define CONFIG_FSL_USDHC
  98 #define CONFIG_SYS_FSL_USDHC_NUM        3
  99 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 100
 101 #define CONFIG_MMC
 102 #define CONFIG_CMD_MMC
 103 #define CONFIG_GENERIC_MMC
 104 #define CONFIG_SUPPORT_EMMC_BOOT
 105 #define CONFIG_BOUNCE_BUFFER
 106
 107 /* Ethernet */
 108 #define CONFIG_FEC_MXC
 109 #define CONFIG_CMD_PING
 110 #define CONFIG_CMD_DHCP
 111 #define CONFIG_CMD_MII
 112 #define CONFIG_CMD_NET
 113 #define CONFIG_FEC_MXC
 114 #define CONFIG_MII
 115 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 116 #define CONFIG_FEC_XCV_TYPE             RGMII
 117 #define CONFIG_ETHPRIME                 "FEC"
 118 #define CONFIG_FEC_MXC_PHYADDR          4
 119 #define CONFIG_PHYLIB
 120 #define CONFIG_PHY_ATHEROS
 121
 122 /* Framebuffer */
 123 #define CONFIG_VIDEO
 124 #ifdef CONFIG_VIDEO
 125 #define CONFIG_VIDEO_IPUV3
 126 #define CONFIG_IPUV3_CLK                260000000
 127 #define CONFIG_CFB_CONSOLE
 128 #define CONFIG_CFB_CONSOLE_ANSI
 129 #define CONFIG_VIDEO_SW_CURSOR
 130 #define CONFIG_VGA_AS_SINGLE_DEVICE
 131 #define CONFIG_VIDEO_BMP_RLE8
 132 #define CONFIG_IMX_HDMI
 133 #define CONFIG_IMX_VIDEO_SKIP
 134 #define CONFIG_CMD_HDMIDETECT
 135 #endif
 136
 137 /* PCI */
 138 #define CONFIG_CMD_PCI
 139 #ifdef CONFIG_CMD_PCI
 140 #define CONFIG_PCI
 141 #define CONFIG_PCI_PNP
 142 #define CONFIG_PCI_SCAN_SHOW
 143 #define CONFIG_PCIE_IMX
 144 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 145 #endif
 146
 147 /* SATA */
 148 #define CONFIG_CMD_SATA
 149 #ifdef CONFIG_CMD_SATA
 150 #define CONFIG_DWC_AHSATA
 151 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 152 #define CONFIG_DWC_AHSATA_PORT_ID       0
 153 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 154 #define CONFIG_LBA48
 155 #define CONFIG_LIBATA
 156 #endif
 157
 158 /* USB */
 159 #define CONFIG_CMD_USB
 160 #ifdef CONFIG_CMD_USB
 161 #define CONFIG_USB_EHCI
 162 #define CONFIG_USB_EHCI_MX6
 163 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 164 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 165 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 166 #define CONFIG_USB_STORAGE
 167 #define CONFIG_CMD_USB_MASS_STORAGE
 168 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 169 #define CONFIG_CI_UDC
 170 #define CONFIG_USBD_HS
 171 #define CONFIG_USB_GADGET
 172 #define CONFIG_USB_GADGET_MASS_STORAGE
 173 #define CONFIG_USB_GADGET_DUALSPEED
 174 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 175 #define CONFIG_USBDOWNLOAD_GADGET
 176 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 177 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 178 #define CONFIG_G_DNL_MANUFACTURER       "TBS"
 179 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 180 #define CONFIG_USB_KEYBOARD
 181 #ifdef CONFIG_USB_KEYBOARD
 182 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 183 #define CONFIG_SYS_STDIO_DEREGISTER
 184 #define CONFIG_PREBOOT \
 185         "if hdmidet; then " \
 186                 "usb start; " \
 187                 "run set_con_usb_hdmi; " \
 188         "else " \
 189                 "run set_con_serial; " \
 190         "fi;"
 191 #endif /* CONFIG_USB_KEYBOARD */
 192 #endif /* CONFIG_CMD_USB      */
 193
 194 /* RTC */
 195 #define CONFIG_CMD_DATE
 196 #ifdef CONFIG_CMD_DATE
 197 #define CONFIG_CMD_I2C
 198 #define CONFIG_RTC_DS1307
 199 #define CONFIG_SYS_RTC_BUS_NUM          2
 200 #endif
 201
 202 /* I2C */
 203 #define CONFIG_CMD_I2C
 204 #ifdef CONFIG_CMD_I2C
 205 #define CONFIG_SYS_I2C
 206 #define CONFIG_SYS_I2C_MXC
 207 #define CONFIG_SYS_I2C_SPEED            100000
 208 #define CONFIG_I2C_EDID
 209 #endif
 210
 211 /* Fuses */
 212 #define CONFIG_CMD_FUSE
 213 #ifdef CONFIG_CMD_FUSE
 214 #define CONFIG_MXC_OCOTP
 215 #endif
 216
 217 #ifndef CONFIG_SYS_DCACHE_OFF
 218 #define CONFIG_CMD_CACHE
 219 #endif
 220
 221 /* Flash and environment organization */
 222 #define CONFIG_SYS_NO_FLASH
 223
 224 #define CONFIG_ENV_IS_IN_MMC
 225 #define CONFIG_SYS_MMC_ENV_DEV          2
 226 #define CONFIG_SYS_MMC_ENV_PART         1
 227 #define CONFIG_ENV_SIZE                 (8 * 1024)
 228 #define CONFIG_ENV_OFFSET               (384 * 1024)
 229 #define CONFIG_ENV_OVERWRITE
 230
 231 #define CONFIG_EXTRA_ENV_SETTINGS \
 232         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 233         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 234                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 235         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 236         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 237                         "${bootargs_mmc3}\0" \
 238         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 239                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 240         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 241                         "mmc read 0x10800000 0x800 0x4000; bootm\0" \
 242         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 243         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 244                         "run bootargs_upd; " \
 245                         "bootm 0x10800000 0x10d00000\0" \
 246         "console=ttymxc0\0" \
 247         "fan=gpio set 92\0" \
 248         "set_con_serial=setenv stdin serial; " \
 249                         "setenv stdout serial; " \
 250                         "setenv stderr serial;\0" \
 251         "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
 252                         "setenv stdout serial,vga; " \
 253                         "setenv stderr serial,vga;\0"
 254
 255 #define CONFIG_BOOTCOMMAND \
 256         "mmc rescan; " \
 257         "if run bootcmd_up1; then " \
 258                 "run bootcmd_up2; " \
 259         "else " \
 260                 "run bootcmd_mmc; " \
 261         "fi"
 262
 263 #endif                         /* __TBS2910_CONFIG_H * */