scripts/Makefile.spl

   1 #
   2 # (C) Copyright 2000-2011
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # (C) Copyright 2011
   6 # Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
   7 #
   8 # (C) Copyright 2011
   9 # Texas Instruments Incorporated - http://www.ti.com/
  10 # Aneesh V <aneesh@ti.com>
  11 #
  12 # SPDX-License-Identifier:      GPL-2.0+
  13 #
  14 # Based on top-level Makefile.
  15 #
  16
  17 src := $(obj)
  18
  19 # Create output directory if not already present
  20 _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
  21
  22 include $(srctree)/scripts/Kbuild.include
  23
  24 -include include/config/auto.conf
  25 -include $(obj)/include/autoconf.mk
  26
  27 KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
  28 ifeq ($(CONFIG_TPL_BUILD),y)
  29 KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
  30 endif
  31
  32 ifeq ($(CONFIG_TPL_BUILD),y)
  33 SPL_BIN := u-boot-tpl
  34 else
  35 SPL_BIN := u-boot-spl
  36 endif
  37
  38 include $(srctree)/config.mk
  39 include $(srctree)/arch/$(ARCH)/Makefile
  40
  41 # Enable garbage collection of un-used sections for SPL
  42 KBUILD_CFLAGS += -ffunction-sections -fdata-sections
  43 LDFLAGS_FINAL += --gc-sections
  44
  45 # FIX ME
  46 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
  47                                                         $(NOSTDINC_FLAGS)
  48
  49 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
  50
  51 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
  52 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
  53
  54 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
  55 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
  56 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
  57 libs-$(CONFIG_SPL_CLK_SUPPORT) += drivers/clk/
  58 libs-$(CONFIG_SPL_DM) += drivers/core/
  59 libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
  60 libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
  61 libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
  62 libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
  63 libs-$(CONFIG_SYS_MVEBU_DDR_AXP) += drivers/ddr/marvell/axp/
  64 libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
  65 libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
  66 libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
  67 libs-y += fs/
  68 libs-$(CONFIG_SPL_LED_SUPPORT) += drivers/led/
  69 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
  70 libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
  71 libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/regulator/
  72 libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
  73 libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
  74 libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
  75 libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
  76 libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
  77 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
  78 libs-$(CONFIG_SPL_NET_SUPPORT) += net/
  79 libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
  80 libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
  81 libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
  82 libs-$(CONFIG_SPL_RAM_SUPPORT) += drivers/ram/
  83 libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
  84 libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
  85 libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
  86 libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
  87 libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
  88 libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
  89
  90 head-y          := $(addprefix $(obj)/,$(head-y))
  91 libs-y          := $(addprefix $(obj)/,$(libs-y))
  92 u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
  93
  94 libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
  95
  96 # Add GCC lib
  97 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
  98 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
  99 PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
 100 endif
 101
 102 u-boot-spl-init := $(head-y)
 103 u-boot-spl-main := $(libs-y)
 104
 105 # Linker Script
 106 ifdef CONFIG_SPL_LDSCRIPT
 107 # need to strip off double quotes
 108 LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
 109 endif
 110
 111 ifeq ($(wildcard $(LDSCRIPT)),)
 112         LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
 113 endif
 114 ifeq ($(wildcard $(LDSCRIPT)),)
 115         LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
 116 endif
 117 ifeq ($(wildcard $(LDSCRIPT)),)
 118         LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
 119 endif
 120 ifeq ($(wildcard $(LDSCRIPT)),)
 121 $(error could not find linker script)
 122 endif
 123
 124 # Special flags for CPP when processing the linker script.
 125 # Pass the version down so we can handle backwards compatibility
 126 # on the fly.
 127 LDPPFLAGS += \
 128         -include $(srctree)/include/u-boot/u-boot.lds.h \
 129         -include $(objtree)/include/config.h \
 130         -DCPUDIR=$(CPUDIR) \
 131         $(shell $(LD) --version | \
 132           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 133
 134 quiet_cmd_mkimage = MKIMAGE $@
 135 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 136         $(if $(KBUILD_VERBOSE:1=), >/dev/null)
 137
 138 MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
 139
 140 MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
 141
 142 MLO MLO.byteswap: $(obj)/u-boot-spl.bin
 143         $(call if_changed,mkimage)
 144
 145 MKIMAGEFLAGS_boot.bin = -T atmelimage
 146
 147 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
 148 MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
 149
 150 boot.bin: $(obj)/../tools/atmel_pmecc_params
 151 endif
 152
 153 boot.bin: $(obj)/u-boot-spl.bin
 154         $(call if_changed,mkimage)
 155
 156 ALL-y   += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
 157
 158 ALL-$(CONFIG_OF_SEPARATE) += $(obj)/$(SPL_BIN)-pad.bin $(obj)/$(SPL_BIN)-dtb.bin
 159
 160 ifdef CONFIG_SAMSUNG
 161 ALL-y   += $(obj)/$(BOARD)-spl.bin
 162 endif
 163
 164 ifdef CONFIG_SUNXI
 165 ALL-y   += $(obj)/sunxi-spl.bin
 166 endif
 167
 168 ifeq ($(CONFIG_SYS_SOC),"at91")
 169 ALL-y   += boot.bin
 170 endif
 171
 172 all:    $(ALL-y)
 173
 174 quiet_cmd_cat = CAT     $@
 175 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 176
 177 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN)-pad.bin \
 178                 $(obj)/$(SPL_BIN).dtb FORCE
 179         $(call if_changed,cat)
 180
 181 # Create a file that pads from the end of u-boot-spl.bin to bss_end
 182 $(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
 183         @bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
 184         dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
 185
 186 # Pass the original device tree file through fdtgrep twice. The first pass
 187 # removes any unwanted nodes (i.e. those which don't have the
 188 # 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
 189 # pass removes various unused properties from the remaining nodes.
 190 # The output is typically a much smaller device tree file.
 191 quiet_cmd_fdtgrep = FDTGREP $@
 192       cmd_fdtgrep = $(objtree)/tools/fdtgrep -b u-boot,dm-pre-reloc -RT $< \
 193                 -n /chosen -O dtb | \
 194         $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
 195                 $(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
 196
 197 $(obj)/$(SPL_BIN).dtb: dts/dt.dtb
 198         $(call cmd,fdtgrep)
 199
 200 quiet_cmd_cpp_cfg = CFG     $@
 201 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 202         -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
 203
 204 $(obj)/$(SPL_BIN).cfg:  include/config.h
 205         $(call if_changed,cpp_cfg)
 206
 207 ifdef CONFIG_SAMSUNG
 208 ifdef CONFIG_VAR_SIZE_SPL
 209 VAR_SIZE_PARAM = --vs
 210 else
 211 VAR_SIZE_PARAM =
 212 endif
 213 $(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
 214         $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
 215         $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
 216         $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
 217 endif
 218
 219 quiet_cmd_objcopy = OBJCOPY $@
 220 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 221
 222 OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
 223
 224 $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
 225         $(call if_changed,objcopy)
 226
 227 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
 228 ifneq ($(CONFIG_SPL_TEXT_BASE),)
 229 LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
 230 endif
 231
 232 ifdef CONFIG_SUNXI
 233 quiet_cmd_mksunxiboot = MKSUNXI $@
 234 cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
 235 $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
 236         $(call if_changed,mksunxiboot)
 237 endif
 238
 239 quiet_cmd_u-boot-spl = LD      $@
 240       cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
 241                        $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
 242                        $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
 243                        $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
 244
 245 $(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
 246         $(call if_changed,u-boot-spl)
 247
 248 $(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
 249
 250 PHONY += $(u-boot-spl-dirs)
 251 $(u-boot-spl-dirs):
 252         $(Q)$(MAKE) $(build)=$@
 253
 254 quiet_cmd_cpp_lds = LDS     $@
 255 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
 256                 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
 257
 258 $(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
 259         $(call if_changed_dep,cpp_lds)
 260
 261 # read all saved command lines
 262
 263 targets := $(wildcard $(sort $(targets)))
 264 cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
 265
 266 ifneq ($(cmd_files),)
 267   $(cmd_files): ;       # Do not try to update included dependency files
 268   include $(cmd_files)
 269 endif
 270
 271 PHONY += FORCE
 272 FORCE:
 273
 274 # Declare the contents of the .PHONY variable as phony.  We keep that
 275 # information in a variable so we can use it in if_changed and friends.
 276 .PHONY: $(PHONY)