*/
void *rockchip_get_cru(void);
-/**
- * rkclk_get_clk() - get a pointer to a given clock
- *
- * This is an internal function - use outside the clock subsystem indicates
- * that work is needed!
- *
- * @clk_id: Clock requested
- * @devp: Returns a pointer to that clock
- * @return 0 if OK, -ve on error
- */
-int rkclk_get_clk(enum rk_clk_id clk_id, struct udevice **devp);
-
struct rk3288_cru;
struct rk3288_grf;
#include <dm.h>
#include <ram.h>
#include <asm/io.h>
+#include <asm/arch/clock.h>
DECLARE_GLOBAL_DATA_PTR;
static int do_clock(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
+ static const struct {
+ char *name;
+ int id;
+ } clks[] = {
+ { "osc", CLK_OSC },
+ { "apll", CLK_ARM },
+ { "dpll", CLK_DDR },
+ { "cpll", CLK_CODEC },
+ { "gpll", CLK_GENERAL },
+#ifdef CONFIG_ROCKCHIP_RK3036
+ { "mpll", CLK_NEW },
+#else
+ { "npll", CLK_NEW },
+#endif
+ };
+ int ret, i;
struct udevice *dev;
- for (uclass_first_device(UCLASS_CLK, &dev);
- dev;
- uclass_next_device(&dev)) {
+ ret = uclass_get_device(UCLASS_CLK, 0, &dev);
+ if (ret) {
+ printf("clk-uclass not found\n");
+ return 0;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(clks); i++) {
+ struct clk clk;
ulong rate;
- rate = clk_get_rate(dev);
- printf("%s: %lu\n", dev->name, rate);
+ clk.id = clks[i].id;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ continue;
+
+ rate = clk_get_rate(&clk);
+ printf("%s: %lu\n", clks[i].name, rate);
+
+ clk_free(&clk);
}
return 0;
struct dram_info {
struct chan_info chan[2];
struct ram_info info;
- struct udevice *ddr_clk;
+ struct clk ddr_clk;
struct rk3288_cru *cru;
struct rk3288_grf *grf;
struct rk3288_sgrf *sgrf;
rk_clrsetreg(&dram->sgrf->soc_con2, 0x1f, sdram_params->base.stride);
}
-static int sdram_init(const struct dram_info *dram,
+static int sdram_init(struct dram_info *dram,
const struct rk3288_sdram_params *sdram_params)
{
int channel;
return -E2BIG;
}
- debug("ddr clk %s\n", dram->ddr_clk->name);
- ret = clk_set_rate(dram->ddr_clk, sdram_params->base.ddr_freq);
+ debug("ddr clk dpll\n");
+ ret = clk_set_rate(&dram->ddr_clk, sdram_params->base.ddr_freq);
debug("ret=%d\n", ret);
if (ret) {
debug("Could not set DDR clock\n");
struct dram_info *priv = dev_get_priv(dev);
struct regmap *map;
int ret;
+ struct udevice *dev_clk;
map = syscon_get_regmap_by_driver_data(ROCKCHIP_SYSCON_NOC);
if (IS_ERR(map))
priv->chan[1].pctl = regmap_get_range(map, 2);
priv->chan[1].publ = regmap_get_range(map, 3);
- ret = uclass_get_device(UCLASS_CLK, CLK_DDR, &priv->ddr_clk);
+ ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
+ if (ret)
+ return ret;
+ priv->ddr_clk.id = CLK_DDR;
+ ret = clk_request(dev_clk, &priv->ddr_clk);
if (ret)
return ret;
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
#include <asm/io.h>
return 0;
}
-ulong msm_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+ulong msm_set_rate(struct clk *clk, ulong rate)
{
- struct msm_clk_priv *priv = dev_get_priv(dev);
+ struct msm_clk_priv *priv = dev_get_priv(clk->dev);
- switch (periph) {
+ switch (clk->id) {
case 0: /* SDC1 */
return clk_init_sdc(priv, 0, rate);
break;
}
static struct clk_ops msm_clk_ops = {
- .set_periph_rate = msm_set_periph_rate,
+ .set_rate = msm_set_rate,
};
static const struct udevice_id msm_clk_ids[] = {
*/
#include <common.h>
#include <errno.h>
-#include <clk.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clk.h>
DECLARE_GLOBAL_DATA_PTR;
-static ulong clk_get_cpu_rate(void)
+static ulong rate(int id)
{
int ret;
struct udevice *dev;
+ struct clk clk;
+ ulong rate;
ret = uclass_get_device(UCLASS_CLK, 0, &dev);
if (ret) {
- panic("uclass-clk: device not found\n");
+ printf("clk-uclass not found\n");
return 0;
}
- return clk_get_rate(dev);
+ clk.id = id;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ rate = clk_get_rate(&clk);
+
+ clk_free(&clk);
+
+ return rate;
+}
+
+static ulong clk_get_cpu_rate(void)
+{
+ return rate(PB7CLK);
}
/* initialize prefetch module related to cpu_clk */
}
#endif
#ifdef CONFIG_CMD_CLK
+
int soc_clk_dump(void)
{
- int i, ret;
- struct udevice *dev;
-
- ret = uclass_get_device(UCLASS_CLK, 0, &dev);
- if (ret) {
- printf("clk-uclass not found\n");
- return ret;
- }
+ int i;
printf("PLL Speed: %lu MHz\n",
- CLK_MHZ(clk_get_periph_rate(dev, PLLCLK)));
- printf("CPU Speed: %lu MHz\n", CLK_MHZ(clk_get_rate(dev)));
- printf("MPLL Speed: %lu MHz\n",
- CLK_MHZ(clk_get_periph_rate(dev, MPLL)));
+ CLK_MHZ(rate(PLLCLK)));
+
+ printf("CPU Speed: %lu MHz\n", CLK_MHZ(rate(PB7CLK)));
+
+ printf("MPLL Speed: %lu MHz\n", CLK_MHZ(rate(MPLL)));
for (i = PB1CLK; i <= PB7CLK; i++)
printf("PB%d Clock Speed: %lu MHz\n", i - PB1CLK + 1,
- CLK_MHZ(clk_get_periph_rate(dev, i)));
+ CLK_MHZ(rate(i)));
for (i = REF1CLK; i <= REF5CLK; i++)
printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,
- CLK_MHZ(clk_get_periph_rate(dev, i)));
+ CLK_MHZ(rate(i)));
return 0;
}
#endif
compatible = "denx,u-boot-fdt-test";
};
- clk@0 {
+ clk_fixed: clk-fixed {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1234>;
+ };
+
+ clk_sandbox: clk-sbox {
compatible = "sandbox,clk";
+ #clock-cells = <1>;
+ };
+
+ clk-test {
+ compatible = "sandbox,clk-test";
+ clocks = <&clk_fixed>,
+ <&clk_sandbox 1>,
+ <&clk_sandbox 0>;
+ clock-names = "fixed", "i2c", "spi";
};
eth@10002000 {
--- /dev/null
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __SANDBOX_CLK_H
+#define __SANDBOX_CLK_H
+
+#include <common.h>
+
+struct udevice;
+
+/**
+ * enum sandbox_clk_id - Identity of clocks implemented by the sandbox clock
+ * provider.
+ *
+ * These IDs are within/relative-to the clock provider.
+ */
+enum sandbox_clk_id {
+ SANDBOX_CLK_ID_SPI,
+ SANDBOX_CLK_ID_I2C,
+
+ SANDBOX_CLK_ID_COUNT,
+};
+
+/**
+ * enum sandbox_clk_test_id - Identity of the clocks consumed by the sandbox
+ * clock test device.
+ *
+ * These are the IDs the clock consumer knows the clocks as.
+ */
+enum sandbox_clk_test_id {
+ SANDBOX_CLK_TEST_ID_FIXED,
+ SANDBOX_CLK_TEST_ID_SPI,
+ SANDBOX_CLK_TEST_ID_I2C,
+
+ SANDBOX_CLK_TEST_ID_COUNT,
+};
+
+/**
+ * sandbox_clk_query_rate - Query the current rate of a sandbox clock.
+ *
+ * @dev: The sandbox clock provider device.
+ * @id: The clock to query.
+ * @return: The rate of the clock.
+ */
+ulong sandbox_clk_query_rate(struct udevice *dev, int id);
+/**
+ * sandbox_clk_query_enable - Query the enable state of a sandbox clock.
+ *
+ * @dev: The sandbox clock provider device.
+ * @id: The clock to query.
+ * @return: The rate of the clock.
+ */
+int sandbox_clk_query_enable(struct udevice *dev, int id);
+
+/**
+ * sandbox_clk_test_get - Ask the sandbox clock test device to request its
+ * clocks.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @return: 0 if OK, or a negative error code.
+ */
+int sandbox_clk_test_get(struct udevice *dev);
+/**
+ * sandbox_clk_test_get_rate - Ask the sandbox clock test device to query a
+ * clock's rate.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @id: The test device's clock ID to query.
+ * @return: The rate of the clock.
+ */
+ulong sandbox_clk_test_get_rate(struct udevice *dev, int id);
+/**
+ * sandbox_clk_test_set_rate - Ask the sandbox clock test device to set a
+ * clock's rate.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @id: The test device's clock ID to configure.
+ * @return: The new rate of the clock.
+ */
+ulong sandbox_clk_test_set_rate(struct udevice *dev, int id, ulong rate);
+/**
+ * sandbox_clk_test_enable - Ask the sandbox clock test device to enable a
+ * clock.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @id: The test device's clock ID to configure.
+ * @return: 0 if OK, or a negative error code.
+ */
+int sandbox_clk_test_enable(struct udevice *dev, int id);
+/**
+ * sandbox_clk_test_disable - Ask the sandbox clock test device to disable a
+ * clock.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @id: The test device's clock ID to configure.
+ * @return: 0 if OK, or a negative error code.
+ */
+int sandbox_clk_test_disable(struct udevice *dev, int id);
+/**
+ * sandbox_clk_test_free - Ask the sandbox clock test device to free its
+ * clocks.
+ *
+ * @dev: The sandbox clock test (client) devivce.
+ * @return: 0 if OK, or a negative error code.
+ */
+int sandbox_clk_test_free(struct udevice *dev);
+
+#endif
#define SANDBOX_CLK_RATE 32768
-enum {
- PERIPH_ID_FIRST = 0,
- PERIPH_ID_SPI = PERIPH_ID_FIRST,
- PERIPH_ID_I2C,
- PERIPH_ID_PCI,
-
- PERIPH_ID_COUNT,
-};
-
/* System controller driver data */
enum {
SYSCON0 = 32,
#include <common.h>
#include <dm.h>
#include <clk.h>
+#include <dt-bindings/clock/microchip,clock.h>
#include <mach/pic32.h>
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
- ulong rate = 0;
+ ulong rate;
struct udevice *dev;
+ struct clk clk;
+ int ret;
printf("Core: %s\n", get_core_name());
- if (!uclass_get_device(UCLASS_CLK, 0, &dev)) {
- rate = clk_get_rate(dev);
- printf("CPU Speed: %lu MHz\n", rate / 1000000);
- }
+ if (uclass_get_device(UCLASS_CLK, 0, &dev))
+ return 0;
+
+ clk.id = PB7CLK;
+ ret = clk_request(dev, &clk);
+ if (ret < 0)
+ return 0;
+
+ rate = clk_get_rate(&clk);
+ printf("CPU Speed: %lu MHz\n", rate / 1000000);
+
+ clk_free(&clk);
return 0;
}
obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
obj-$(CONFIG_SANDBOX) += clk_sandbox.o
+obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o
obj-$(CONFIG_MACH_PIC32) += clk_pic32.o
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
obj-$(CONFIG_CLK_EXYNOS) += exynos/
/*
* Copyright (C) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016, NVIDIA CORPORATION.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
-#include <dm/lists.h>
-#include <dm/root.h>
DECLARE_GLOBAL_DATA_PTR;
-ulong clk_get_rate(struct udevice *dev)
+static inline struct clk_ops *clk_dev_ops(struct udevice *dev)
{
- struct clk_ops *ops = clk_get_ops(dev);
-
- if (!ops->get_rate)
- return -ENOSYS;
-
- return ops->get_rate(dev);
+ return (struct clk_ops *)dev->driver->ops;
}
-ulong clk_set_rate(struct udevice *dev, ulong rate)
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+#ifdef CONFIG_SPL_BUILD
+int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)
{
- struct clk_ops *ops = clk_get_ops(dev);
+ int ret;
+ u32 cell[2];
- if (!ops->set_rate)
+ if (index != 0)
return -ENOSYS;
-
- return ops->set_rate(dev, rate);
+ assert(clk);
+ ret = uclass_get_device(UCLASS_CLK, 0, &clk->dev);
+ if (ret)
+ return ret;
+ ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, "clocks",
+ cell, 2);
+ if (ret)
+ return ret;
+ clk->id = cell[1];
+ return 0;
}
-int clk_enable(struct udevice *dev, int periph)
+int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk)
{
- struct clk_ops *ops = clk_get_ops(dev);
-
- if (!ops->enable)
- return -ENOSYS;
-
- return ops->enable(dev, periph);
+ return -ENOSYS;
}
-
-ulong clk_get_periph_rate(struct udevice *dev, int periph)
+#else
+static int clk_of_xlate_default(struct clk *clk,
+ struct fdtdec_phandle_args *args)
{
- struct clk_ops *ops = clk_get_ops(dev);
+ debug("%s(clk=%p)\n", __func__, clk);
- if (!ops->get_periph_rate)
- return -ENOSYS;
-
- return ops->get_periph_rate(dev, periph);
-}
-
-ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate)
-{
- struct clk_ops *ops = clk_get_ops(dev);
+ if (args->args_count > 1) {
+ debug("Invaild args_count: %d\n", args->args_count);
+ return -EINVAL;
+ }
- if (!ops->set_periph_rate)
- return -ENOSYS;
+ if (args->args_count)
+ clk->id = args->args[0];
+ else
+ clk->id = 0;
- return ops->set_periph_rate(dev, periph, rate);
+ return 0;
}
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int clk_get_by_index(struct udevice *dev, int index, struct udevice **clk_devp)
+int clk_get_by_index(struct udevice *dev, int index, struct clk *clk)
{
int ret;
-#ifdef CONFIG_SPL_BUILD
- u32 cell[2];
-
- if (index != 0)
- return -ENOSYS;
- assert(*clk_devp);
- ret = uclass_get_device(UCLASS_CLK, 0, clk_devp);
- if (ret)
- return ret;
- ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, "clocks",
- cell, 2);
- if (ret)
- return ret;
- return cell[1];
-#else
struct fdtdec_phandle_args args;
+ struct udevice *dev_clk;
+ struct clk_ops *ops;
+
+ debug("%s(dev=%p, index=%d, clk=%p)\n", __func__, dev, index, clk);
- assert(*clk_devp);
+ assert(clk);
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev->of_offset,
"clocks", "#clock-cells", 0, index,
&args);
return ret;
}
- ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, clk_devp);
+ ret = uclass_get_device_by_of_offset(UCLASS_CLK, args.node, &dev_clk);
if (ret) {
debug("%s: uclass_get_device_by_of_offset failed: err=%d\n",
__func__, ret);
return ret;
}
- return args.args_count > 0 ? args.args[0] : 0;
-#endif
+ ops = clk_dev_ops(dev_clk);
+
+ if (ops->of_xlate)
+ ret = ops->of_xlate(clk, &args);
+ else
+ ret = clk_of_xlate_default(clk, &args);
+ if (ret) {
+ debug("of_xlate() failed: %d\n", ret);
+ return ret;
+ }
+
+ return clk_request(dev_clk, clk);
+}
+
+int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk)
+{
+ int index;
+
+ debug("%s(dev=%p, name=%s, clk=%p)\n", __func__, dev, name, clk);
+
+ index = fdt_find_string(gd->fdt_blob, dev->of_offset, "clock-names",
+ name);
+ if (index < 0) {
+ debug("fdt_find_string() failed: %d\n", index);
+ return index;
+ }
+
+ return clk_get_by_index(dev, index, clk);
}
#endif
+#endif
+
+int clk_request(struct udevice *dev, struct clk *clk)
+{
+ struct clk_ops *ops = clk_dev_ops(dev);
+
+ debug("%s(dev=%p, clk=%p)\n", __func__, dev, clk);
+
+ clk->dev = dev;
+
+ if (!ops->request)
+ return 0;
+
+ return ops->request(clk);
+}
+
+int clk_free(struct clk *clk)
+{
+ struct clk_ops *ops = clk_dev_ops(clk->dev);
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (!ops->free)
+ return 0;
+
+ return ops->free(clk);
+}
+
+ulong clk_get_rate(struct clk *clk)
+{
+ struct clk_ops *ops = clk_dev_ops(clk->dev);
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (!ops->get_rate)
+ return -ENOSYS;
+
+ return ops->get_rate(clk);
+}
+
+ulong clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct clk_ops *ops = clk_dev_ops(clk->dev);
+
+ debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);
+
+ if (!ops->set_rate)
+ return -ENOSYS;
+
+ return ops->set_rate(clk, rate);
+}
+
+int clk_enable(struct clk *clk)
+{
+ struct clk_ops *ops = clk_dev_ops(clk->dev);
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (!ops->enable)
+ return -ENOSYS;
+
+ return ops->enable(clk);
+}
+
+int clk_disable(struct clk *clk)
+{
+ struct clk_ops *ops = clk_dev_ops(clk->dev);
+
+ debug("%s(clk=%p)\n", __func__, clk);
+
+ if (!ops->disable)
+ return -ENOSYS;
+
+ return ops->disable(clk);
+}
UCLASS_DRIVER(clk) = {
.id = UCLASS_CLK,
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm/device.h>
DECLARE_GLOBAL_DATA_PTR;
#define to_clk_fixed_rate(dev) ((struct clk_fixed_rate *)dev_get_platdata(dev))
-static ulong clk_fixed_rate_get_rate(struct udevice *dev)
+static ulong clk_fixed_rate_get_rate(struct clk *clk)
{
- return to_clk_fixed_rate(dev)->fixed_rate;
-}
+ if (clk->id != 0)
+ return -EINVAL;
-static ulong clk_fixed_rate_get_periph_rate(struct udevice *dev, int periph)
-{
- return clk_fixed_rate_get_rate(dev);
+ return to_clk_fixed_rate(clk->dev)->fixed_rate;
}
const struct clk_ops clk_fixed_rate_ops = {
.get_rate = clk_fixed_rate_get_rate,
- .get_periph_rate = clk_fixed_rate_get_periph_rate,
};
static int clk_fixed_rate_ofdata_to_platdata(struct udevice *dev)
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <div64.h>
#include <wait_bit.h>
pic32_mpll_init(priv);
}
-static ulong pic32_clk_get_rate(struct udevice *dev)
+static ulong pic32_get_rate(struct clk *clk)
{
- struct pic32_clk_priv *priv = dev_get_priv(dev);
-
- return pic32_get_cpuclk(priv);
-}
-
-static ulong pic32_get_periph_rate(struct udevice *dev, int periph)
-{
- struct pic32_clk_priv *priv = dev_get_priv(dev);
+ struct pic32_clk_priv *priv = dev_get_priv(clk->dev);
ulong rate;
- switch (periph) {
+ switch (clk->id) {
case PB1CLK ... PB7CLK:
- rate = pic32_get_pbclk(priv, periph);
+ rate = pic32_get_pbclk(priv, clk->id);
break;
case REF1CLK ... REF5CLK:
- rate = pic32_get_refclk(priv, periph);
+ rate = pic32_get_refclk(priv, clk->id);
break;
case PLLCLK:
rate = pic32_get_pll_rate(priv);
return rate;
}
-static ulong pic32_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+static ulong pic32_set_rate(struct clk *clk, ulong rate)
{
- struct pic32_clk_priv *priv = dev_get_priv(dev);
+ struct pic32_clk_priv *priv = dev_get_priv(clk->dev);
ulong pll_hz;
- switch (periph) {
+ switch (clk->id) {
case REF1CLK ... REF5CLK:
pll_hz = pic32_get_pll_rate(priv);
- pic32_set_refclk(priv, periph, pll_hz, rate, ROCLK_SRC_SPLL);
+ pic32_set_refclk(priv, clk->id, pll_hz, rate, ROCLK_SRC_SPLL);
break;
default:
break;
}
static struct clk_ops pic32_pic32_clk_ops = {
- .get_rate = pic32_clk_get_rate,
- .set_periph_rate = pic32_set_periph_rate,
- .get_periph_rate = pic32_get_periph_rate,
+ .set_rate = pic32_set_rate,
+ .get_rate = pic32_get_rate,
};
static int pic32_clk_probe(struct udevice *dev)
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
#include <syscon.h>
DECLARE_GLOBAL_DATA_PTR;
-struct rk3036_clk_plat {
- enum rk_clk_id clk_id;
-};
-
struct rk3036_clk_priv {
struct rk3036_cru *cru;
ulong rate;
return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
}
-static ulong rk3036_clk_get_rate(struct udevice *dev)
-{
- struct rk3036_clk_plat *plat = dev_get_platdata(dev);
- struct rk3036_clk_priv *priv = dev_get_priv(dev);
-
- debug("%s\n", dev->name);
- return rkclk_pll_get_rate(priv->cru, plat->clk_id);
-}
-
-static ulong rk3036_clk_set_rate(struct udevice *dev, ulong rate)
+static ulong rk3036_clk_get_rate(struct clk *clk)
{
- debug("%s\n", dev->name);
+ struct rk3036_clk_priv *priv = dev_get_priv(clk->dev);
- return 0;
+ switch (clk->id) {
+ case 0 ... 63:
+ return rkclk_pll_get_rate(priv->cru, clk->id);
+ default:
+ return -ENOENT;
+ }
}
-static ulong rk3036_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+static ulong rk3036_clk_set_rate(struct clk *clk, ulong rate)
{
- struct rk3036_clk_priv *priv = dev_get_priv(dev);
- ulong new_rate;
+ struct rk3036_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong new_rate, gclk_rate;
- switch (periph) {
+ gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
+ switch (clk->id) {
+ case 0 ... 63:
+ return 0;
case HCLK_EMMC:
- new_rate = rockchip_mmc_set_clk(priv->cru, clk_get_rate(dev),
- periph, rate);
+ new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate,
+ clk->id, rate);
break;
default:
return -ENOENT;
static struct clk_ops rk3036_clk_ops = {
.get_rate = rk3036_clk_get_rate,
.set_rate = rk3036_clk_set_rate,
- .set_periph_rate = rk3036_set_periph_rate,
};
static int rk3036_clk_probe(struct udevice *dev)
{
- struct rk3036_clk_plat *plat = dev_get_platdata(dev);
struct rk3036_clk_priv *priv = dev_get_priv(dev);
- if (plat->clk_id != CLK_OSC) {
- struct rk3036_clk_priv *parent_priv = dev_get_priv(dev->parent);
-
- priv->cru = parent_priv->cru;
- return 0;
- }
priv->cru = (struct rk3036_cru *)dev_get_addr(dev);
rkclk_init(priv->cru);
return 0;
}
-static const char *const clk_name[] = {
- "osc",
- "apll",
- "dpll",
- "cpll",
- "gpll",
- "mpll",
-};
-
static int rk3036_clk_bind(struct udevice *dev)
{
- struct rk3036_clk_plat *plat = dev_get_platdata(dev);
- int pll, ret;
-
- /* We only need to set up the root clock */
- if (dev->of_offset == -1) {
- plat->clk_id = CLK_OSC;
- return 0;
- }
-
- /* Create devices for P main clocks */
- for (pll = 1; pll < CLK_COUNT; pll++) {
- struct udevice *child;
- struct rk3036_clk_plat *cplat;
-
- debug("%s %s\n", __func__, clk_name[pll]);
- ret = device_bind_driver(dev, "clk_rk3036", clk_name[pll],
- &child);
- if (ret)
- return ret;
-
- cplat = dev_get_platdata(child);
- cplat->clk_id = pll;
- }
+ int ret;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rk3036_sysreset", "reset", &dev);
.id = UCLASS_CLK,
.of_match = rk3036_clk_ids,
.priv_auto_alloc_size = sizeof(struct rk3036_clk_priv),
- .platdata_auto_alloc_size = sizeof(struct rk3036_clk_plat),
.ops = &rk3036_clk_ops,
.bind = rk3036_clk_bind,
.probe = rk3036_clk_probe,
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
#include <syscon.h>
DECLARE_GLOBAL_DATA_PTR;
-struct rk3288_clk_plat {
- enum rk_clk_id clk_id;
-};
-
struct rk3288_clk_priv {
struct rk3288_grf *grf;
struct rk3288_cru *cru;
static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
-int rkclk_get_clk(enum rk_clk_id clk_id, struct udevice **devp)
-{
- struct udevice *dev;
-
- for (uclass_find_first_device(UCLASS_CLK, &dev);
- dev;
- uclass_find_next_device(&dev)) {
- struct rk3288_clk_plat *plat = dev_get_platdata(dev);
-
- if (plat->clk_id == clk_id) {
- *devp = dev;
- return device_probe(dev);
- }
- }
-
- return -ENODEV;
-}
-
void *rockchip_get_cru(void)
{
struct rk3288_clk_priv *priv;
struct udevice *dev;
int ret;
- ret = rkclk_get_clk(CLK_GENERAL, &dev);
+ ret = uclass_get_device(UCLASS_CLK, 0, &dev);
if (ret)
return ERR_PTR(ret);
+
priv = dev_get_priv(dev);
+
return priv->cru;
}
}
}
-static ulong rk3288_clk_get_rate(struct udevice *dev)
-{
- struct rk3288_clk_plat *plat = dev_get_platdata(dev);
- struct rk3288_clk_priv *priv = dev_get_priv(dev);
-
- debug("%s\n", dev->name);
- return rkclk_pll_get_rate(priv->cru, plat->clk_id);
-}
-
-static ulong rk3288_clk_set_rate(struct udevice *dev, ulong rate)
-{
- struct rk3288_clk_plat *plat = dev_get_platdata(dev);
- struct rk3288_clk_priv *priv = dev_get_priv(dev);
-
- debug("%s\n", dev->name);
- switch (plat->clk_id) {
- case CLK_DDR:
- rkclk_configure_ddr(priv->cru, priv->grf, rate);
- break;
- default:
- return -ENOENT;
- }
-
- return 0;
-}
-
static ulong rockchip_mmc_get_clk(struct rk3288_cru *cru, uint gclk_rate,
int periph)
{
return rockchip_spi_get_clk(cru, gclk_rate, periph);
}
-static ulong rk3288_get_periph_rate(struct udevice *dev, int periph)
+static ulong rk3288_clk_get_rate(struct clk *clk)
{
- struct rk3288_clk_priv *priv = dev_get_priv(dev);
- struct udevice *gclk;
+ struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
ulong new_rate, gclk_rate;
- int ret;
- ret = rkclk_get_clk(CLK_GENERAL, &gclk);
- if (ret)
- return ret;
- gclk_rate = clk_get_rate(gclk);
- switch (periph) {
+ gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
+ switch (clk->id) {
+ case 0 ... 63:
+ new_rate = rkclk_pll_get_rate(priv->cru, clk->id);
+ break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO0:
- new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, periph);
+ new_rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id);
break;
case SCLK_SPI0:
case SCLK_SPI1:
case SCLK_SPI2:
- new_rate = rockchip_spi_get_clk(priv->cru, gclk_rate, periph);
+ new_rate = rockchip_spi_get_clk(priv->cru, gclk_rate, clk->id);
break;
case PCLK_I2C0:
case PCLK_I2C1:
return new_rate;
}
-static ulong rk3288_set_periph_rate(struct udevice *dev, int periph, ulong rate)
+static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate)
{
- struct rk3288_clk_priv *priv = dev_get_priv(dev);
+ struct rk3288_clk_priv *priv = dev_get_priv(clk->dev);
struct rk3288_cru *cru = priv->cru;
- struct udevice *gclk;
ulong new_rate, gclk_rate;
- int ret;
- ret = rkclk_get_clk(CLK_GENERAL, &gclk);
- if (ret)
- return ret;
- gclk_rate = clk_get_rate(gclk);
- switch (periph) {
+ gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
+ switch (clk->id) {
+ case CLK_DDR:
+ new_rate = rkclk_configure_ddr(priv->cru, priv->grf, rate);
+ break;
case HCLK_EMMC:
case HCLK_SDMMC:
case HCLK_SDIO0:
- new_rate = rockchip_mmc_set_clk(cru, gclk_rate, periph, rate);
+ new_rate = rockchip_mmc_set_clk(cru, gclk_rate, clk->id, rate);
break;
case SCLK_SPI0:
case SCLK_SPI1:
case SCLK_SPI2:
- new_rate = rockchip_spi_set_clk(cru, gclk_rate, periph, rate);
+ new_rate = rockchip_spi_set_clk(cru, gclk_rate, clk->id, rate);
break;
#ifndef CONFIG_SPL_BUILD
case SCLK_MAC:
- new_rate = rockchip_mac_set_clk(priv->cru, periph, rate);
+ new_rate = rockchip_mac_set_clk(priv->cru, clk->id, rate);
break;
case DCLK_VOP0:
case DCLK_VOP1:
- new_rate = rockchip_vop_set_clk(cru, priv->grf, periph, rate);
+ new_rate = rockchip_vop_set_clk(cru, priv->grf, clk->id, rate);
break;
case SCLK_EDP_24M:
/* clk_edp_24M source: 24M */
div = CPLL_HZ / rate;
assert((div - 1 < 64) && (div * rate == CPLL_HZ));
- switch (periph) {
+ switch (clk->id) {
case ACLK_VOP0:
rk_clrsetreg(&cru->cru_clksel_con[31],
3 << 6 | 0x1f << 0,
static struct clk_ops rk3288_clk_ops = {
.get_rate = rk3288_clk_get_rate,
.set_rate = rk3288_clk_set_rate,
- .set_periph_rate = rk3288_set_periph_rate,
- .get_periph_rate = rk3288_get_periph_rate,
};
static int rk3288_clk_probe(struct udevice *dev)
{
- struct rk3288_clk_plat *plat = dev_get_platdata(dev);
struct rk3288_clk_priv *priv = dev_get_priv(dev);
- if (plat->clk_id != CLK_OSC) {
- struct rk3288_clk_priv *parent_priv = dev_get_priv(dev->parent);
-
- priv->cru = parent_priv->cru;
- priv->grf = parent_priv->grf;
- return 0;
- }
priv->cru = (struct rk3288_cru *)dev_get_addr(dev);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
#ifdef CONFIG_SPL_BUILD
return 0;
}
-static const char *const clk_name[CLK_COUNT] = {
- "osc",
- "apll",
- "dpll",
- "cpll",
- "gpll",
- "npll",
-};
-
static int rk3288_clk_bind(struct udevice *dev)
{
- struct rk3288_clk_plat *plat = dev_get_platdata(dev);
- int pll, ret;
-
- /* We only need to set up the root clock */
- if (dev->of_offset == -1) {
- plat->clk_id = CLK_OSC;
- return 0;
- }
-
- /* Create devices for P main clocks */
- for (pll = 1; pll < CLK_COUNT; pll++) {
- struct udevice *child;
- struct rk3288_clk_plat *cplat;
-
- debug("%s %s\n", __func__, clk_name[pll]);
- ret = device_bind_driver(dev, "clk_rk3288", clk_name[pll],
- &child);
- if (ret)
- return ret;
- cplat = dev_get_platdata(child);
- cplat->clk_id = pll;
- }
+ int ret;
/* The reset driver does not have a device node, so bind it here */
ret = device_bind_driver(gd->dm_root, "rk3288_sysreset", "reset", &dev);
.id = UCLASS_CLK,
.of_match = rk3288_clk_ids,
.priv_auto_alloc_size = sizeof(struct rk3288_clk_priv),
- .platdata_auto_alloc_size = sizeof(struct rk3288_clk_plat),
.ops = &rk3288_clk_ops,
.bind = rk3288_clk_bind,
.probe = rk3288_clk_probe,
*/
#include <common.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm.h>
#include <errno.h>
-#include <asm/test.h>
+#include <asm/clk.h>
struct sandbox_clk_priv {
- ulong rate;
- ulong periph_rate[PERIPH_ID_COUNT];
+ ulong rate[SANDBOX_CLK_ID_COUNT];
+ bool enabled[SANDBOX_CLK_ID_COUNT];
};
-static ulong sandbox_clk_get_rate(struct udevice *dev)
+static ulong sandbox_clk_get_rate(struct clk *clk)
{
- struct sandbox_clk_priv *priv = dev_get_priv(dev);
+ struct sandbox_clk_priv *priv = dev_get_priv(clk->dev);
+
+ if (clk->id < 0 || clk->id >= SANDBOX_CLK_ID_COUNT)
+ return -EINVAL;
- return priv->rate;
+ return priv->rate[clk->id];
}
-static ulong sandbox_clk_set_rate(struct udevice *dev, ulong rate)
+static ulong sandbox_clk_set_rate(struct clk *clk, ulong rate)
{
- struct sandbox_clk_priv *priv = dev_get_priv(dev);
+ struct sandbox_clk_priv *priv = dev_get_priv(clk->dev);
+ ulong old_rate;
+
+ if (clk->id < 0 || clk->id >= SANDBOX_CLK_ID_COUNT)
+ return -EINVAL;
if (!rate)
return -EINVAL;
- priv->rate = rate;
- return 0;
-}
-static ulong sandbox_get_periph_rate(struct udevice *dev, int periph)
-{
- struct sandbox_clk_priv *priv = dev_get_priv(dev);
+ old_rate = priv->rate[clk->id];
+ priv->rate[clk->id] = rate;
- if (periph < PERIPH_ID_FIRST || periph >= PERIPH_ID_COUNT)
- return -EINVAL;
- return priv->periph_rate[periph];
+ return old_rate;
}
-static ulong sandbox_set_periph_rate(struct udevice *dev, int periph,
- ulong rate)
+static int sandbox_clk_enable(struct clk *clk)
{
- struct sandbox_clk_priv *priv = dev_get_priv(dev);
- ulong old_rate;
+ struct sandbox_clk_priv *priv = dev_get_priv(clk->dev);
- if (periph < PERIPH_ID_FIRST || periph >= PERIPH_ID_COUNT)
+ if (clk->id < 0 || clk->id >= SANDBOX_CLK_ID_COUNT)
return -EINVAL;
- old_rate = priv->periph_rate[periph];
- priv->periph_rate[periph] = rate;
- return old_rate;
+ priv->enabled[clk->id] = true;
+
+ return 0;
}
-static int sandbox_clk_probe(struct udevice *dev)
+static int sandbox_clk_disable(struct clk *clk)
{
- struct sandbox_clk_priv *priv = dev_get_priv(dev);
+ struct sandbox_clk_priv *priv = dev_get_priv(clk->dev);
+
+ if (clk->id < 0 || clk->id >= SANDBOX_CLK_ID_COUNT)
+ return -EINVAL;
- priv->rate = SANDBOX_CLK_RATE;
+ priv->enabled[clk->id] = false;
return 0;
}
static struct clk_ops sandbox_clk_ops = {
.get_rate = sandbox_clk_get_rate,
.set_rate = sandbox_clk_set_rate,
- .get_periph_rate = sandbox_get_periph_rate,
- .set_periph_rate = sandbox_set_periph_rate,
+ .enable = sandbox_clk_enable,
+ .disable = sandbox_clk_disable,
};
static const struct udevice_id sandbox_clk_ids[] = {
.of_match = sandbox_clk_ids,
.ops = &sandbox_clk_ops,
.priv_auto_alloc_size = sizeof(struct sandbox_clk_priv),
- .probe = sandbox_clk_probe,
};
+
+ulong sandbox_clk_query_rate(struct udevice *dev, int id)
+{
+ struct sandbox_clk_priv *priv = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_ID_COUNT)
+ return -EINVAL;
+
+ return priv->rate[id];
+}
+
+int sandbox_clk_query_enable(struct udevice *dev, int id)
+{
+ struct sandbox_clk_priv *priv = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_ID_COUNT)
+ return -EINVAL;
+
+ return priv->enabled[id];
+}
--- /dev/null
+/*
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <clk.h>
+#include <asm/clk.h>
+
+struct sandbox_clk_test {
+ struct clk clks[SANDBOX_CLK_TEST_ID_COUNT];
+};
+
+static const char * const sandbox_clk_test_names[] = {
+ [SANDBOX_CLK_TEST_ID_FIXED] = "fixed",
+ [SANDBOX_CLK_TEST_ID_SPI] = "spi",
+ [SANDBOX_CLK_TEST_ID_I2C] = "i2c",
+};
+
+int sandbox_clk_test_get(struct udevice *dev)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+ int i, ret;
+
+ for (i = 0; i < SANDBOX_CLK_TEST_ID_COUNT; i++) {
+ ret = clk_get_by_name(dev, sandbox_clk_test_names[i],
+ &sbct->clks[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+ulong sandbox_clk_test_get_rate(struct udevice *dev, int id)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_TEST_ID_COUNT)
+ return -EINVAL;
+
+ return clk_get_rate(&sbct->clks[id]);
+}
+
+ulong sandbox_clk_test_set_rate(struct udevice *dev, int id, ulong rate)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_TEST_ID_COUNT)
+ return -EINVAL;
+
+ return clk_set_rate(&sbct->clks[id], rate);
+}
+
+int sandbox_clk_test_enable(struct udevice *dev, int id)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_TEST_ID_COUNT)
+ return -EINVAL;
+
+ return clk_enable(&sbct->clks[id]);
+}
+
+int sandbox_clk_test_disable(struct udevice *dev, int id)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+
+ if (id < 0 || id >= SANDBOX_CLK_TEST_ID_COUNT)
+ return -EINVAL;
+
+ return clk_disable(&sbct->clks[id]);
+}
+
+int sandbox_clk_test_free(struct udevice *dev)
+{
+ struct sandbox_clk_test *sbct = dev_get_priv(dev);
+ int i, ret;
+
+ for (i = 0; i < SANDBOX_CLK_TEST_ID_COUNT; i++) {
+ ret = clk_free(&sbct->clks[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sandbox_clk_test_ids[] = {
+ { .compatible = "sandbox,clk-test" },
+ { }
+};
+
+U_BOOT_DRIVER(sandbox_clk_test) = {
+ .name = "sandbox_clk_test",
+ .id = UCLASS_MISC,
+ .of_match = sandbox_clk_test_ids,
+ .priv_auto_alloc_size = sizeof(struct sandbox_clk_test),
+};
#include <common.h>
#include <dm.h>
#include <errno.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <asm/io.h>
#include <dt-bindings/clock/exynos7420-clk.h>
#include "clk-pll.h"
unsigned long sclk_uart2;
};
-static ulong exynos7420_topc_get_periph_rate(struct udevice *dev, int periph)
+static ulong exynos7420_topc_get_rate(struct clk *clk)
{
- struct exynos7420_clk_topc_priv *priv = dev_get_priv(dev);
+ struct exynos7420_clk_topc_priv *priv = dev_get_priv(clk->dev);
- switch (periph) {
+ switch (clk->id) {
case DOUT_SCLK_BUS0_PLL:
case SCLK_BUS0_PLL_A:
case SCLK_BUS0_PLL_B:
}
static struct clk_ops exynos7420_clk_topc_ops = {
- .get_periph_rate = exynos7420_topc_get_periph_rate,
+ .get_rate = exynos7420_topc_get_rate,
};
static int exynos7420_clk_topc_probe(struct udevice *dev)
{
struct exynos7420_clk_topc_priv *priv = dev_get_priv(dev);
struct exynos7420_clk_cmu_topc *topc;
- struct udevice *clk_dev;
+ struct clk in_clk;
unsigned long rate;
fdt_addr_t base;
int ret;
topc = (struct exynos7420_clk_cmu_topc *)base;
priv->topc = topc;
- ret = clk_get_by_index(dev, 0, &clk_dev);
+ ret = clk_get_by_index(dev, 0, &in_clk);
if (ret >= 0)
- priv->fin_freq = clk_get_rate(clk_dev);
+ priv->fin_freq = clk_get_rate(&in_clk);
rate = pll145x_get_rate(&topc->bus0_pll_con[0], priv->fin_freq);
if (readl(&topc->mux_sel[1]) & (1 << 16))
return 0;
}
-static ulong exynos7420_top0_get_periph_rate(struct udevice *dev, int periph)
+static ulong exynos7420_top0_get_rate(struct clk *clk)
{
- struct exynos7420_clk_top0_priv *priv = dev_get_priv(dev);
+ struct exynos7420_clk_top0_priv *priv = dev_get_priv(clk->dev);
struct exynos7420_clk_cmu_top0 *top0 = priv->top0;
- switch (periph) {
+ switch (clk->id) {
case CLK_SCLK_UART2:
return priv->mout_top0_bus0_pll_half /
DIVIDER(&top0->div_peric[3], 8, 0xf);
}
static struct clk_ops exynos7420_clk_top0_ops = {
- .get_periph_rate = exynos7420_top0_get_periph_rate,
+ .get_rate = exynos7420_top0_get_rate,
};
static int exynos7420_clk_top0_probe(struct udevice *dev)
{
struct exynos7420_clk_top0_priv *priv;
struct exynos7420_clk_cmu_top0 *top0;
- struct udevice *clk_dev;
+ struct clk in_clk;
fdt_addr_t base;
int ret;
top0 = (struct exynos7420_clk_cmu_top0 *)base;
priv->top0 = top0;
- ret = clk_get_by_index(dev, 1, &clk_dev);
+ ret = clk_get_by_index(dev, 1, &in_clk);
if (ret >= 0) {
priv->mout_top0_bus0_pll_half =
- clk_get_periph_rate(clk_dev, ret);
+ clk_get_rate(&in_clk);
if (readl(&top0->mux_sel[1]) & (1 << 16))
priv->mout_top0_bus0_pll_half >>= 1;
}
return 0;
}
-static ulong exynos7420_peric1_get_periph_rate(struct udevice *dev, int periph)
+static ulong exynos7420_peric1_get_rate(struct clk *clk)
{
- struct udevice *clk_dev;
+ struct clk in_clk;
unsigned int ret;
unsigned long freq = 0;
- switch (periph) {
+ switch (clk->id) {
case SCLK_UART2:
- ret = clk_get_by_index(dev, 3, &clk_dev);
+ ret = clk_get_by_index(clk->dev, 3, &in_clk);
if (ret < 0)
return ret;
- freq = clk_get_periph_rate(clk_dev, ret);
+ freq = clk_get_rate(&in_clk);
break;
}
}
static struct clk_ops exynos7420_clk_peric1_ops = {
- .get_periph_rate = exynos7420_peric1_get_periph_rate,
+ .get_rate = exynos7420_peric1_get_rate,
};
static const struct udevice_id exynos7420_clk_topc_compat[] = {
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/sizes.h>
-#include <clk.h>
+#include <clk-uclass.h>
#include <dm/device.h>
#include "clk-uniphier.h"
-static int uniphier_clk_enable(struct udevice *dev, int index)
+static int uniphier_clk_enable(struct clk *clk)
{
- struct uniphier_clk_priv *priv = dev_get_priv(dev);
+ struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
struct uniphier_clk_gate_data *gate = priv->socdata->gate;
unsigned int nr_gate = priv->socdata->nr_gate;
void __iomem *reg;
int i;
for (i = 0; i < nr_gate; i++) {
- if (gate[i].index != index)
+ if (gate[i].index != clk->id)
continue;
reg = priv->base + gate[i].reg;
return 0;
}
-static ulong uniphier_clk_get_rate(struct udevice *dev, int index)
+static ulong uniphier_clk_get_rate(struct clk *clk)
{
- struct uniphier_clk_priv *priv = dev_get_priv(dev);
+ struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
unsigned int nr_rdata = priv->socdata->nr_rate;
void __iomem *reg;
int i;
for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != index)
+ if (rdata[i].index != clk->id)
continue;
if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
return matched_rate;
}
-static ulong uniphier_clk_set_rate(struct udevice *dev, int index, ulong rate)
+static ulong uniphier_clk_set_rate(struct clk *clk, ulong rate)
{
- struct uniphier_clk_priv *priv = dev_get_priv(dev);
+ struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
unsigned int nr_rdata = priv->socdata->nr_rate;
void __iomem *reg;
/* first, decide the best match rate */
for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != index)
+ if (rdata[i].index != clk->id)
continue;
if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
/* second, really set registers */
for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != index || rdata[i].rate != best_rate)
+ if (rdata[i].index != clk->id || rdata[i].rate != best_rate)
continue;
reg = priv->base + rdata[i].reg;
const struct clk_ops uniphier_clk_ops = {
.enable = uniphier_clk_enable,
- .get_periph_rate = uniphier_clk_get_rate,
- .set_periph_rate = uniphier_clk_set_rate,
+ .get_rate = uniphier_clk_get_rate,
+ .set_rate = uniphier_clk_set_rate,
};
int uniphier_clk_probe(struct udevice *dev)
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <clk.h>
#include <dm/device.h>
#include "clk-uniphier.h"
#define RK_I2C_FIFO_SIZE 32
struct rk_i2c {
- struct udevice *clk;
+ struct clk clk;
struct i2c_regs *regs;
unsigned int speed;
- int clk_id;
};
static inline void rk_i2c_get_div(int div, int *divh, int *divl)
int div, divl, divh;
/* First get i2c rate from pclk */
- i2c_rate = clk_get_periph_rate(i2c->clk, i2c->clk_id);
+ i2c_rate = clk_get_rate(&i2c->clk);
div = DIV_ROUND_UP(i2c_rate, scl_rate * 8) - 2;
divh = 0;
bus->name, ret);
return ret;
}
- priv->clk_id = ret;
return 0;
}
"clock-frequency", 400000);
uint clkd[2]; /* clk_id and clk_no */
int clk_offset;
- struct udevice *clk;
+ struct udevice *clk_dev;
+ struct clk clk;
int ret;
ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, "clock", clkd,
if (clk_offset < 0)
return clk_offset;
- ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk);
+ ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
if (ret)
return ret;
- ret = clk_set_periph_rate(clk, clkd[1], clk_rate);
+ clk.id = clkd[1];
+ ret = clk_request(clk_dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_set_rate(&clk, clk_rate);
+ clk_free(&clk);
if (ret < 0)
return ret;
};
struct rockchip_dwmmc_priv {
- struct udevice *clk;
- int periph;
+ struct clk clk;
struct dwmci_host host;
};
struct rockchip_dwmmc_priv *priv = dev_get_priv(dev);
int ret;
- ret = clk_set_periph_rate(priv->clk, priv->periph, freq);
+ ret = clk_set_rate(&priv->clk, freq);
if (ret < 0) {
debug("%s: err=%d\n", __func__, ret);
return ret;
ret = clk_get_by_index(dev, 0, &priv->clk);
if (ret < 0)
return ret;
- priv->periph = ret;
if (fdtdec_get_int_array(gd->fdt_blob, dev->of_offset,
"clock-freq-min-max", minmax, 2))
struct uniphier_sd_priv *priv = dev_get_priv(dev);
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
fdt_addr_t base;
- struct udevice *clk_dev;
- int clk_id;
+ struct clk clk;
int ret;
priv->dev = dev;
if (!priv->regbase)
return -ENOMEM;
- clk_id = clk_get_by_index(dev, 0, &clk_dev);
- if (clk_id < 0) {
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0) {
dev_err(dev, "failed to get host clock\n");
- return clk_id;
+ return ret;
}
/* set to max rate */
- priv->mclk = clk_set_periph_rate(clk_dev, clk_id, ULONG_MAX);
+ priv->mclk = clk_set_rate(&clk, ULONG_MAX);
if (IS_ERR_VALUE(priv->mclk)) {
dev_err(dev, "failed to set rate for host clock\n");
+ clk_free(&clk);
return priv->mclk;
}
- ret = clk_enable(clk_dev, clk_id);
+ ret = clk_enable(&clk);
+ clk_free(&clk);
if (ret) {
dev_err(dev, "failed to enable host clock\n");
return ret;
"clock-frequency", 115200);
uint clkd[2]; /* clk_id and clk_no */
int clk_offset;
- struct udevice *clk;
+ struct udevice *clk_dev;
+ struct clk clk;
int ret;
ret = fdtdec_get_int_array(gd->fdt_blob, dev->of_offset, "clock", clkd,
if (clk_offset < 0)
return clk_offset;
- ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk);
+ ret = uclass_get_device_by_of_offset(UCLASS_CLK, clk_offset, &clk_dev);
if (ret)
return ret;
- ret = clk_set_periph_rate(clk, clkd[1], clk_rate);
+ clk.id = clkd[1];
+ ret = clk_request(clk_dev, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_set_rate(&clk, clk_rate);
+ clk_free(&clk);
if (ret < 0)
return ret;
static int pic32_uart_probe(struct udevice *dev)
{
struct pic32_uart_priv *priv = dev_get_priv(dev);
- struct udevice *clkdev;
+ struct clk clk;
fdt_addr_t addr;
fdt_size_t size;
int ret;
priv->base = ioremap(addr, size);
/* get clock rate */
- ret = clk_get_by_index(dev, 0, &clkdev);
+ ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
- priv->uartclk = clk_get_periph_rate(clkdev, ret);
+ priv->uartclk = clk_get_rate(&clk);
+ clk_free(&clk);
/* initialize serial */
return pic32_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE);
u32 uclk;
#ifdef CONFIG_CLK_EXYNOS
- struct udevice *clk_dev;
+ struct clk clk;
u32 ret;
- ret = clk_get_by_index(dev, 1, &clk_dev);
+ ret = clk_get_by_index(dev, 1, &clk);
if (ret < 0)
return ret;
- uclk = clk_get_periph_rate(clk_dev, ret);
+ uclk = clk_get_rate(&clk);
#else
uclk = get_uart_clk(plat->port_id);
#endif
struct rockchip_spi_priv {
struct rockchip_spi *regs;
- struct udevice *clk;
- int clk_id;
+ struct clk clk;
unsigned int max_freq;
unsigned int mode;
ulong last_transaction_us; /* Time of last transaction end */
bus->name, ret);
return ret;
}
- priv->clk_id = ret;
plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
50000000);
* Use 99 MHz as our clock since it divides nicely into 594 MHz which
* is the assumed speed for CLK_GENERAL.
*/
- ret = clk_set_periph_rate(priv->clk, priv->clk_id, 99000000);
+ ret = clk_set_rate(&priv->clk, 99000000);
if (ret < 0) {
debug("%s: Failed to set clock: %d\n", __func__, ret);
return ret;
int i;
for (i = 0; ; i++) {
- struct udevice *clk_dev;
- int clk_id;
+ struct clk clk;
+ int ret;
- clk_id = clk_get_by_index(dev, i, &clk_dev);
- if (clk_id < 0)
+ ret = clk_get_by_index(dev, i, &clk);
+ if (ret < 0)
break;
- if (clk_enable(clk_dev, clk_id))
- printf("failed to enable clock (dev=%s, id=%d)\n",
- clk_dev->name, clk_id);
+ if (clk_enable(&clk))
+ printf("failed to enable clock %d\n", i);
+ clk_free(&clk);
}
hccr = map_physmem(dev_get_addr(dev), 0x100, MAP_NOCACHE);
struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
struct rk_edp_priv *priv = dev_get_priv(dev);
struct rk3288_edp *regs = priv->regs;
- struct udevice *clk;
- int periph;
+ struct clk clk;
int ret;
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
ret = clk_get_by_index(dev, 1, &clk);
if (ret >= 0) {
- periph = ret;
- ret = clk_set_periph_rate(clk, periph, 0);
+ ret = clk_set_rate(&clk, 0);
+ clk_free(&clk);
}
if (ret) {
debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret);
ret = clk_get_by_index(uc_plat->src_dev, 0, &clk);
if (ret >= 0) {
- periph = ret;
- ret = clk_set_periph_rate(clk, periph, 192000000);
+ ret = clk_set_rate(&clk, 192000000);
+ clk_free(&clk);
}
if (ret < 0) {
debug("%s: Failed to set clock in source device '%s': ret=%d\n",
{
struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
struct rk_hdmi_priv *priv = dev_get_priv(dev);
- struct udevice *reg, *clk;
- int periph;
+ struct udevice *reg;
+ struct clk clk;
int ret;
int vop_id = uc_plat->source_id;
ret = clk_get_by_index(dev, 0, &clk);
if (ret >= 0) {
- periph = ret;
- ret = clk_set_periph_rate(clk, periph, 0);
+ ret = clk_set_rate(&clk, 0);
+ clk_free(&clk);
}
if (ret) {
debug("%s: Failed to set EDP clock: ret=%d\n", __func__, ret);
*/
ret = clk_get_by_index(uc_plat->src_dev, 0, &clk);
if (ret >= 0) {
- periph = ret;
- ret = clk_set_periph_rate(clk, periph, 384000000);
+ ret = clk_set_rate(&clk, 384000000);
+ clk_free(&clk);
}
if (ret < 0) {
debug("%s: Failed to set clock in source device '%s': ret=%d\n",
*/
#include <common.h>
-#include <clk.h>
#include <display.h>
#include <dm.h>
#include <edid.h>
struct udevice *disp;
int ret, remote, i, offset;
struct display_plat *disp_uc_plat;
- struct udevice *clk;
+ struct udevice *dev_clk;
+ struct clk clk;
vop_id = fdtdec_get_int(blob, ep_node, "reg", -1);
debug("vop_id=%d\n", vop_id);
return ret;
}
- ret = rkclk_get_clk(CLK_NEW, &clk);
+ ret = uclass_get_device(UCLASS_CLK, 0, &dev_clk);
if (!ret) {
- ret = clk_set_periph_rate(clk, DCLK_VOP0 + remote_vop_id,
- timing.pixelclock.typ);
+ clk.id = DCLK_VOP0 + remote_vop_id;
+ ret = clk_request(dev_clk, &clk);
}
+ if (!ret)
+ ret = clk_set_rate(&clk, timing.pixelclock.typ);
if (ret) {
debug("%s: Failed to set pixel clock: ret=%d\n", __func__, ret);
return ret;
--- /dev/null
+/*
+ * Copyright (c) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016, NVIDIA CORPORATION.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CLK_UCLASS_H
+#define _CLK_UCLASS_H
+
+/* See clk.h for background documentation. */
+
+#include <clk.h>
+#include <fdtdec.h>
+
+/**
+ * struct clk_ops - The functions that a clock driver must implement.
+ */
+struct clk_ops {
+ /**
+ * of_xlate - Translate a client's device-tree (OF) clock specifier.
+ *
+ * The clock core calls this function as the first step in implementing
+ * a client's clk_get_by_*() call.
+ *
+ * If this function pointer is set to NULL, the clock core will use a
+ * default implementation, which assumes #clock-cells = <1>, and that
+ * the DT cell contains a simple integer clock ID.
+ *
+ * At present, the clock API solely supports device-tree. If this
+ * changes, other xxx_xlate() functions may be added to support those
+ * other mechanisms.
+ *
+ * @clock: The clock struct to hold the translation result.
+ * @args: The clock specifier values from device tree.
+ * @return 0 if OK, or a negative error code.
+ */
+ int (*of_xlate)(struct clk *clock,
+ struct fdtdec_phandle_args *args);
+ /**
+ * request - Request a translated clock.
+ *
+ * The clock core calls this function as the second step in
+ * implementing a client's clk_get_by_*() call, following a successful
+ * xxx_xlate() call, or as the only step in implementing a client's
+ * clk_request() call.
+ *
+ * @clock: The clock struct to request; this has been fille in by
+ * a previoux xxx_xlate() function call, or by the caller
+ * of clk_request().
+ * @return 0 if OK, or a negative error code.
+ */
+ int (*request)(struct clk *clock);
+ /**
+ * free - Free a previously requested clock.
+ *
+ * This is the implementation of the client clk_free() API.
+ *
+ * @clock: The clock to free.
+ * @return 0 if OK, or a negative error code.
+ */
+ int (*free)(struct clk *clock);
+ /**
+ * get_rate() - Get current clock rate.
+ *
+ * @clk: The clock to query.
+ * @return clock rate in Hz, or -ve error code
+ */
+ ulong (*get_rate)(struct clk *clk);
+ /**
+ * set_rate() - Set current clock rate.
+ *
+ * @clk: The clock to manipulate.
+ * @rate: New clock rate in Hz.
+ * @return new rate, or -ve error code.
+ */
+ ulong (*set_rate)(struct clk *clk, ulong rate);
+ /**
+ * enable() - Enable a clock.
+ *
+ * @clk: The clock to manipulate.
+ * @return zero on success, or -ve error code.
+ */
+ int (*enable)(struct clk *clk);
+ /**
+ * disable() - Disable a clock.
+ *
+ * @clk: The clock to manipulate.
+ * @return zero on success, or -ve error code.
+ */
+ int (*disable)(struct clk *clk);
+};
+
+#endif
/*
* Copyright (c) 2015 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
+ * Copyright (c) 2016, NVIDIA CORPORATION.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CLK_H_
#define _CLK_H_
-#include <errno.h>
#include <linux/types.h>
-struct udevice;
+/**
+ * A clock is a hardware signal that oscillates autonomously at a specific
+ * frequency and duty cycle. Most hardware modules require one or more clock
+ * signal to drive their operation. Clock signals are typically generated
+ * externally to the HW module consuming them, by an entity this API calls a
+ * clock provider. This API provides a standard means for drivers to enable and
+ * disable clocks, and to set the rate at which they oscillate.
+ *
+ * A driver that implements UCLASS_CLOCK is a clock provider. A provider will
+ * often implement multiple separate clocks, since the hardware it manages
+ * often has this capability. clock_uclass.h describes the interface which
+ * clock providers must implement.
+ *
+ * Clock consumers/clients are the HW modules driven by the clock signals. This
+ * header file describes the API used by drivers for those HW modules.
+ */
-int soc_clk_dump(void);
+struct udevice;
-struct clk_ops {
- /**
- * get_rate() - Get current clock rate
- *
- * @dev: Device to check (UCLASS_CLK)
- * @return clock rate in Hz, or -ve error code
- */
- ulong (*get_rate)(struct udevice *dev);
-
- /**
- * set_rate() - Set current clock rate
- *
- * @dev: Device to adjust
- * @rate: New clock rate in Hz
- * @return new rate, or -ve error code
- */
- ulong (*set_rate)(struct udevice *dev, ulong rate);
-
- /**
- * enable() - Enable the clock for a peripheral
- *
- * @dev: clock provider
- * @periph: Peripheral ID to enable
- * @return zero on success, or -ve error code
- */
- int (*enable)(struct udevice *dev, int periph);
-
- /**
- * get_periph_rate() - Get clock rate for a peripheral
- *
- * @dev: Device to check (UCLASS_CLK)
- * @periph: Peripheral ID to check
- * @return clock rate in Hz, or -ve error code
- */
- ulong (*get_periph_rate)(struct udevice *dev, int periph);
-
- /**
- * set_periph_rate() - Set current clock rate for a peripheral
- *
- * @dev: Device to update (UCLASS_CLK)
- * @periph: Peripheral ID to update
- * @return new clock rate in Hz, or -ve error code
+/**
+ * struct clk - A handle to (allowing control of) a single clock.
+ *
+ * Clients provide storage for clock handles. The content of the structure is
+ * managed solely by the clock API and clock drivers. A clock struct is
+ * initialized by "get"ing the clock struct. The clock struct is passed to all
+ * other clock APIs to identify which clock signal to operate upon.
+ *
+ * @dev: The device which implements the clock signal.
+ * @id: The clock signal ID within the provider.
+ *
+ * Currently, the clock API assumes that a single integer ID is enough to
+ * identify and configure any clock signal for any clock provider. If this
+ * assumption becomes invalid in the future, the struct could be expanded to
+ * either (a) add more fields to allow clock providers to store additional
+ * information, or (b) replace the id field with an opaque pointer, which the
+ * provider would dynamically allocated during its .of_xlate op, and process
+ * during is .request op. This may require the addition of an extra op to clean
+ * up the allocation.
+ */
+struct clk {
+ struct udevice *dev;
+ /*
+ * Written by of_xlate. We assume a single id is enough for now. In the
+ * future, we might add more fields here.
*/
- ulong (*set_periph_rate)(struct udevice *dev, int periph, ulong rate);
+ unsigned long id;
};
-#define clk_get_ops(dev) ((struct clk_ops *)(dev)->driver->ops)
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+/**
+ * clock_get_by_index - Get/request a clock by integer index.
+ *
+ * This looks up and requests a clock. The index is relative to the client
+ * device; each device is assumed to have n clocks associated with it somehow,
+ * and this function finds and requests one of them. The mapping of client
+ * device clock indices to provider clocks may be via device-tree properties,
+ * board-provided mapping tables, or some other mechanism.
+ *
+ * @dev: The client device.
+ * @index: The index of the clock to request, within the client's list of
+ * clocks.
+ * @clock A pointer to a clock struct to initialize.
+ * @return 0 if OK, or a negative error code.
+ */
+int clk_get_by_index(struct udevice *dev, int index, struct clk *clk);
/**
- * clk_get_rate() - Get current clock rate
+ * clock_get_by_name - Get/request a clock by name.
*
- * @dev: Device to check (UCLASS_CLK)
- * @return clock rate in Hz, or -ve error code
+ * This looks up and requests a clock. The name is relative to the client
+ * device; each device is assumed to have n clocks associated with it somehow,
+ * and this function finds and requests one of them. The mapping of client
+ * device clock names to provider clocks may be via device-tree properties,
+ * board-provided mapping tables, or some other mechanism.
+ *
+ * @dev: The client device.
+ * @name: The name of the clock to request, within the client's list of
+ * clocks.
+ * @clock: A pointer to a clock struct to initialize.
+ * @return 0 if OK, or a negative error code.
*/
-ulong clk_get_rate(struct udevice *dev);
+int clk_get_by_name(struct udevice *dev, const char *name, struct clk *clk);
+#else
+static inline int clk_get_by_index(struct udevice *dev, int index,
+ struct clk *clk)
+{
+ return -ENOSYS;
+}
+
+static int clk_get_by_name(struct udevice *dev, const char *name,
+ struct clk *clk)
+{
+ return -ENOSYS;
+}
+#endif
/**
- * clk_set_rate() - Set current clock rate
+ * clk_request - Request a clock by provider-specific ID.
*
- * @dev: Device to adjust
- * @rate: New clock rate in Hz
- * @return new rate, or -ve error code
+ * This requests a clock using a provider-specific ID. Generally, this function
+ * should not be used, since clk_get_by_index/name() provide an interface that
+ * better separates clients from intimate knowledge of clock providers.
+ * However, this function may be useful in core SoC-specific code.
+ *
+ * @dev: The clock provider device.
+ * @clock: A pointer to a clock struct to initialize. The caller must
+ * have already initialized any field in this struct which the
+ * clock provider uses to identify the clock.
+ * @return 0 if OK, or a negative error code.
*/
-ulong clk_set_rate(struct udevice *dev, ulong rate);
+int clk_request(struct udevice *dev, struct clk *clk);
/**
- * clk_enable() - Enable the clock for a peripheral
+ * clock_free - Free a previously requested clock.
*
- * @dev: clock provider
- * @periph: Peripheral ID to enable
- * @return zero on success, or -ve error code
+ * @clock: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return 0 if OK, or a negative error code.
*/
-int clk_enable(struct udevice *dev, int periph);
+int clk_free(struct clk *clk);
/**
- * clk_get_periph_rate() - Get current clock rate for a peripheral
+ * clk_get_rate() - Get current clock rate.
*
- * @dev: Device to check (UCLASS_CLK)
- * @return clock rate in Hz, -ve error code
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return clock rate in Hz, or -ve error code.
*/
-ulong clk_get_periph_rate(struct udevice *dev, int periph);
+ulong clk_get_rate(struct clk *clk);
/**
- * clk_set_periph_rate() - Set current clock rate for a peripheral
+ * clk_set_rate() - Set current clock rate.
*
- * @dev: Device to update (UCLASS_CLK)
- * @periph: Peripheral ID to update
- * @return new clock rate in Hz, or -ve error code
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @rate: New clock rate in Hz.
+ * @return new rate, or -ve error code.
*/
-ulong clk_set_periph_rate(struct udevice *dev, int periph, ulong rate);
+ulong clk_set_rate(struct clk *clk, ulong rate);
-#if CONFIG_IS_ENABLED(OF_CONTROL)
/**
- * clk_get_by_index() - look up a clock referenced by a device
+ * clk_enable() - Enable (turn on) a clock.
*
- * Parse a device's 'clocks' list, returning information on the indexed clock,
- * ensuring that it is activated.
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return zero on success, or -ve error code.
+ */
+int clk_enable(struct clk *clk);
+
+/**
+ * clk_disable() - Disable (turn off) a clock.
*
- * @dev: Device containing the clock reference
- * @index: Clock index to return (0 = first)
- * @clk_devp: Returns clock device
- * @return: Peripheral ID for the device to control. This is the first
- * argument after the clock node phandle. If there is no arguemnt,
- * returns 0. Return -ve error code on any error
+ * @clk: A clock struct that was previously successfully requested by
+ * clk_request/get_by_*().
+ * @return zero on success, or -ve error code.
*/
-int clk_get_by_index(struct udevice *dev, int index, struct udevice **clk_devp);
-#else
-static inline int clk_get_by_index(struct udevice *dev, int index,
- struct udevice **clk_devp)
-{
- return -ENOSYS;
-}
-#endif
+int clk_disable(struct clk *clk);
-#endif /* _CLK_H_ */
+int soc_clk_dump(void);
+
+#endif
*/
#include <common.h>
-#include <clk.h>
#include <dm.h>
-#include <asm/test.h>
+#include <asm/clk.h>
#include <dm/test.h>
#include <linux/err.h>
#include <test/ut.h>
-/* Test that we can find and adjust clocks */
-static int dm_test_clk_base(struct unit_test_state *uts)
+static int dm_test_clk(struct unit_test_state *uts)
{
- struct udevice *clk;
+ struct udevice *dev_fixed, *dev_clk, *dev_test;
ulong rate;
- ut_assertok(uclass_get_device(UCLASS_CLK, 0, &clk));
- rate = clk_get_rate(clk);
- ut_asserteq(SANDBOX_CLK_RATE, rate);
- ut_asserteq(-EINVAL, clk_set_rate(clk, 0));
- ut_assertok(clk_set_rate(clk, rate * 2));
- ut_asserteq(SANDBOX_CLK_RATE * 2, clk_get_rate(clk));
+ ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-fixed",
+ &dev_fixed));
- return 0;
-}
-DM_TEST(dm_test_clk_base, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+ ut_assertok(uclass_get_device_by_name(UCLASS_CLK, "clk-sbox",
+ &dev_clk));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
+ ut_asserteq(0, sandbox_clk_query_rate(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_rate(dev_clk, SANDBOX_CLK_ID_I2C));
-/* Test that peripheral clocks work as expected */
-static int dm_test_clk_periph(struct unit_test_state *uts)
-{
- struct udevice *clk;
- ulong rate;
+ ut_assertok(uclass_get_device_by_name(UCLASS_MISC, "clk-test",
+ &dev_test));
+ ut_assertok(sandbox_clk_test_get(dev_test));
- ut_assertok(uclass_get_device(UCLASS_CLK, 0, &clk));
- rate = clk_set_periph_rate(clk, PERIPH_ID_COUNT, 123);
- ut_asserteq(-EINVAL, rate);
- ut_asserteq(1, IS_ERR_VALUE(rate));
+ ut_asserteq(1234,
+ sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_FIXED));
+ ut_asserteq(0, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI));
+ ut_asserteq(0, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C));
- rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 123);
- ut_asserteq(0, rate);
- ut_asserteq(123, clk_get_periph_rate(clk, PERIPH_ID_SPI));
+ rate = sandbox_clk_test_set_rate(dev_test, SANDBOX_CLK_TEST_ID_FIXED,
+ 12345);
+ ut_assert(IS_ERR_VALUE(rate));
+ rate = sandbox_clk_test_get_rate(dev_test, SANDBOX_CLK_TEST_ID_FIXED);
+ ut_asserteq(1234, rate);
- rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 1234);
- ut_asserteq(123, rate);
+ ut_asserteq(0, sandbox_clk_test_set_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI,
+ 1000));
+ ut_asserteq(0, sandbox_clk_test_set_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C,
+ 2000));
- rate = clk_set_periph_rate(clk, PERIPH_ID_I2C, 567);
+ ut_asserteq(1000, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI));
+ ut_asserteq(2000, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C));
- rate = clk_set_periph_rate(clk, PERIPH_ID_SPI, 1234);
- ut_asserteq(1234, rate);
+ ut_asserteq(1000, sandbox_clk_test_set_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI,
+ 10000));
+ ut_asserteq(2000, sandbox_clk_test_set_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C,
+ 20000));
+
+ rate = sandbox_clk_test_set_rate(dev_test, SANDBOX_CLK_TEST_ID_SPI, 0);
+ ut_assert(IS_ERR_VALUE(rate));
+ rate = sandbox_clk_test_set_rate(dev_test, SANDBOX_CLK_TEST_ID_I2C, 0);
+ ut_assert(IS_ERR_VALUE(rate));
+
+ ut_asserteq(10000, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI));
+ ut_asserteq(20000, sandbox_clk_test_get_rate(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C));
+
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
+ ut_asserteq(10000, sandbox_clk_query_rate(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(20000, sandbox_clk_query_rate(dev_clk, SANDBOX_CLK_ID_I2C));
+
+ ut_assertok(sandbox_clk_test_enable(dev_test, SANDBOX_CLK_TEST_ID_SPI));
+ ut_asserteq(1, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
+
+ ut_assertok(sandbox_clk_test_enable(dev_test, SANDBOX_CLK_TEST_ID_I2C));
+ ut_asserteq(1, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(1, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
+
+ ut_assertok(sandbox_clk_test_disable(dev_test,
+ SANDBOX_CLK_TEST_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(1, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
+
+ ut_assertok(sandbox_clk_test_disable(dev_test,
+ SANDBOX_CLK_TEST_ID_I2C));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_SPI));
+ ut_asserteq(0, sandbox_clk_query_enable(dev_clk, SANDBOX_CLK_ID_I2C));
- ut_asserteq(567, clk_get_periph_rate(clk, PERIPH_ID_I2C));
+ ut_assertok(sandbox_clk_test_free(dev_test));
return 0;
}
-DM_TEST(dm_test_clk_periph, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+DM_TEST(dm_test_clk, DM_TESTF_SCAN_FDT);
projects / karo-tx-uboot.git / commitdiff