--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).a
+
+COBJS = clock.o reset.o timer.o
+SOBJS =
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * Get the peripheral bus frequency depending on pll pin settings
+ */
+ulong get_bus_freq(ulong dummy)
+{
+ struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
+ MB86R0x_CRG_BASE;
+ uint32_t pllmode;
+
+ pllmode = readl(&crg->crpr) & MB86R0x_CRG_CRPR_PLLMODE;
+
+ if (pllmode == MB86R0x_CRG_CRPR_PLLMODE_X20)
+ return 40000000;
+
+ return 41164767;
+}
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * Reset the cpu by setting software reset request bit
+ */
+void reset_cpu(ulong ignored)
+{
+ struct mb86r0x_crg * crg = (struct mb86r0x_crg *)
+ MB86R0x_CRG_BASE;
+
+ writel(MB86R0x_CRSR_SWRSTREQ, &crg->crsr);
+ while (1)
+ /* NOP */;
+ /* Never reached */
+}
--- /dev/null
+/*
+ * (C) Copyright 2007-2008
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
+ * Lead Tech Design <www.leadtechdesign.com>
+ *
+ * (C) Copyright 2010
+ * Matthias Weisser, Graf-Syteco <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <div64.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_FREQ (CONFIG_MB86R0x_IOCLK / 256)
+
+static unsigned long long timestamp;
+static ulong lastdec;
+
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, TIMER_FREQ);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= TIMER_FREQ;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
+/* nothing really to do with interrupts, just starts up a counter. */
+int timer_init(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+ ulong ctrl = readl(&timer->control);
+
+ writel(TIMER_LOAD_VAL, &timer->load);
+
+ ctrl |= MB86R0x_TIMER_ENABLE | MB86R0x_TIMER_PRS_8S |
+ MB86R0x_TIMER_SIZE_32;
+
+ writel(ctrl, &timer->control);
+
+ reset_timer_masked();
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+unsigned long long get_ticks(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+ ulong now = readl(&timer->value);
+
+ if (now <= lastdec) {
+ /* normal mode (non roll) */
+ /* move stamp forward with absolut diff ticks */
+ timestamp += lastdec - now;
+ } else {
+ /* we have rollover of incrementer */
+ timestamp += lastdec + TIMER_LOAD_VAL - now;
+ }
+ lastdec = now;
+ return timestamp;
+}
+
+void reset_timer_masked(void)
+{
+ struct mb86r0x_timer * timer = (struct mb86r0x_timer *)
+ MB86R0x_TIMER_BASE;
+
+ /* capture current value time */
+ lastdec = readl(&timer->value);
+ timestamp = 0; /* start "advancing" time stamp from 0 */
+}
+
+ulong get_timer_masked(void)
+{
+ return tick_to_time(get_ticks());
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = usec_to_tick(usec);
+ tmp = get_ticks(); /* get current timestamp */
+
+ while ((get_ticks() - tmp) < tmo) /* loop till event */
+ /*NOP*/;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ ulong tbclk;
+
+ tbclk = TIMER_FREQ;
+ return tbclk;
+}
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef ASM_OFFSETS_H
+#define ASM_OFFSETS_H
+
+/*
+ * Offset definitions for DDR controller
+ */
+#define DDR2_DRIC 0x00
+#define DDR2_DRIC1 0x02
+#define DDR2_DRIC2 0x04
+#define DDR2_DRCA 0x06
+#define DDR2_DRCM 0x08
+#define DDR2_DRCST1 0x0a
+#define DDR2_DRCST2 0x0c
+#define DDR2_DRCR 0x0e
+#define DDR2_DRCF 0x20
+#define DDR2_DRASR 0x30
+#define DDR2_DRIMS 0x50
+#define DDR2_DROS 0x60
+#define DDR2_DRIBSODT1 0x64
+#define DDR2_DROABA 0x70
+#define DDR2_DROBS 0x84
+
+/*
+ * Offset definitions Chip Control Module
+ */
+#define CCNT_CDCRC 0xec
+
+/*
+ * Offset definitions clock reset generator
+ */
+#define CRG_CRPR 0x00
+#define CRG_CRHA 0x18
+#define CRG_CRPA 0x1c
+#define CRG_CRPB 0x20
+#define CRG_CRHB 0x24
+#define CRG_CRAM 0x28
+
+/*
+ * Offset definitions External bus interface
+ */
+#define MEMC_MCFMODE0 0x00
+#define MEMC_MCFMODE2 0x08
+#define MEMC_MCFMODE4 0x10
+#define MEMC_MCFTIM0 0x20
+#define MEMC_MCFTIM2 0x28
+#define MEMC_MCFTIM4 0x30
+#define MEMC_MCFAREA0 0x40
+#define MEMC_MCFAREA2 0x48
+#define MEMC_MCFAREA4 0x50
+
+#endif /* ASM_OFFSETS_H */
--- /dev/null
+/*
+ * (C) Copyright 2007
+ *
+ * Author : Carsten Schneider, mycable GmbH
+ * <cs@mycable.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <asm/arch/mb86r0x.h>
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2007
+ *
+ * mb86r0x definitions
+ *
+ * Author : Carsten Schneider, mycable GmbH
+ * <cs@mycable.de>
+ *
+ * (C) Copyright 2010
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MB86R0X_H
+#define MB86R0X_H
+
+#ifndef __ASSEMBLY__
+
+/* GPIO registers */
+struct mb86r0x_gpio {
+ uint32_t gpdr0;
+ uint32_t gpdr1;
+ uint32_t gpdr2;
+ uint32_t res;
+ uint32_t gpddr0;
+ uint32_t gpddr1;
+ uint32_t gpddr2;
+};
+
+/* PWM registers */
+struct mb86r0x_pwm {
+ uint32_t bcr;
+ uint32_t tpr;
+ uint32_t pr;
+ uint32_t dr;
+ uint32_t cr;
+ uint32_t sr;
+ uint32_t ccr;
+ uint32_t ir;
+};
+
+/* The mb86r0x chip control (CCNT) register set. */
+struct mb86r0x_ccnt {
+ uint32_t ccid;
+ uint32_t csrst;
+ uint32_t pad0[2];
+ uint32_t cist;
+ uint32_t cistm;
+ uint32_t cgpio_ist;
+ uint32_t cgpio_istm;
+ uint32_t cgpio_ip;
+ uint32_t cgpio_im;
+ uint32_t caxi_bw;
+ uint32_t caxi_ps;
+ uint32_t cmux_md;
+ uint32_t cex_pin_st;
+ uint32_t cmlb;
+ uint32_t pad1[1];
+ uint32_t cusb;
+ uint32_t pad2[41];
+ uint32_t cbsc;
+ uint32_t cdcrc;
+ uint32_t cmsr0;
+ uint32_t cmsr1;
+ uint32_t pad3[2];
+};
+
+/* The mb86r0x clock reset generator */
+struct mb86r0x_crg {
+ uint32_t crpr;
+ uint32_t pad0;
+ uint32_t crwr;
+ uint32_t crsr;
+ uint32_t crda;
+ uint32_t crdb;
+ uint32_t crha;
+ uint32_t crpa;
+ uint32_t crpb;
+ uint32_t crhb;
+ uint32_t cram;
+};
+
+/* The mb86r0x timer */
+struct mb86r0x_timer {
+ uint32_t load;
+ uint32_t value;
+ uint32_t control;
+ uint32_t intclr;
+ uint32_t ris;
+ uint32_t mis;
+ uint32_t bgload;
+};
+
+/* mb86r0x gdc display controller */
+struct mb86r0x_gdc_dsp {
+ /* Display settings */
+ uint32_t dcm0;
+ uint16_t pad00;
+ uint16_t htp;
+ uint16_t hdp;
+ uint16_t hdb;
+ uint16_t hsp;
+ uint8_t hsw;
+ uint8_t vsw;
+ uint16_t pad01;
+ uint16_t vtr;
+ uint16_t vsp;
+ uint16_t vdp;
+ uint16_t wx;
+ uint16_t wy;
+ uint16_t ww;
+ uint16_t wh;
+
+ /* Layer 0 */
+ uint32_t l0m;
+ uint32_t l0oa;
+ uint32_t l0da;
+ uint16_t l0dx;
+ uint16_t l0dy;
+
+ /* Layer 1 */
+ uint32_t l1m;
+ uint32_t cbda0;
+ uint32_t cbda1;
+ uint32_t pad02;
+
+ /* Layer 2 */
+ uint32_t l2m;
+ uint32_t l2oa0;
+ uint32_t l2da0;
+ uint32_t l2oa1;
+ uint32_t l2da1;
+ uint16_t l2dx;
+ uint16_t l2dy;
+
+ /* Layer 3 */
+ uint32_t l3m;
+ uint32_t l3oa0;
+ uint32_t l3da0;
+ uint32_t l3oa1;
+ uint32_t l3da1;
+ uint16_t l3dx;
+ uint16_t l3dy;
+
+ /* Layer 4 */
+ uint32_t l4m;
+ uint32_t l4oa0;
+ uint32_t l4da0;
+ uint32_t l4oa1;
+ uint32_t l4da1;
+ uint16_t l4dx;
+ uint16_t l4dy;
+
+ /* Layer 5 */
+ uint32_t l5m;
+ uint32_t l5oa0;
+ uint32_t l5da0;
+ uint32_t l5oa1;
+ uint32_t l5da1;
+ uint16_t l5dx;
+ uint16_t l5dy;
+
+ /* Cursor */
+ uint16_t cutc;
+ uint8_t cpm;
+ uint8_t csize;
+ uint32_t cuoa0;
+ uint16_t cux0;
+ uint16_t cuy0;
+ uint32_t cuoa1;
+ uint16_t cux1;
+ uint16_t cuy1;
+
+ /* Layer blending */
+ uint32_t l0bld;
+ uint32_t pad03;
+ uint32_t l0tc;
+ uint16_t l3tc;
+ uint16_t l2tc;
+ uint32_t pad04[15];
+
+ /* Display settings */
+ uint32_t dcm1;
+ uint32_t dcm2;
+ uint32_t dcm3;
+ uint32_t pad05;
+
+ /* Layer 0 extended */
+ uint32_t l0em;
+ uint16_t l0wx;
+ uint16_t l0wy;
+ uint16_t l0ww;
+ uint16_t l0wh;
+ uint32_t pad06;
+
+ /* Layer 1 extended */
+ uint32_t l1em;
+ uint16_t l1wx;
+ uint16_t l1wy;
+ uint16_t l1ww;
+ uint16_t l1wh;
+ uint32_t pad07;
+
+ /* Layer 2 extended */
+ uint32_t l2em;
+ uint16_t l2wx;
+ uint16_t l2wy;
+ uint16_t l2ww;
+ uint16_t l2wh;
+ uint32_t pad08;
+
+ /* Layer 3 extended */
+ uint32_t l3em;
+ uint16_t l3wx;
+ uint16_t l3wy;
+ uint16_t l3ww;
+ uint16_t l3wh;
+ uint32_t pad09;
+
+ /* Layer 4 extended */
+ uint32_t l4em;
+ uint16_t l4wx;
+ uint16_t l4wy;
+ uint16_t l4ww;
+ uint16_t l4wh;
+ uint32_t pad10;
+
+ /* Layer 5 extended */
+ uint32_t l5em;
+ uint16_t l5wx;
+ uint16_t l5wy;
+ uint16_t l5ww;
+ uint16_t l5wh;
+ uint32_t pad11;
+
+ /* Multi screen control */
+ uint32_t msc;
+ uint32_t pad12[3];
+ uint32_t dls;
+ uint32_t dbgc;
+
+ /* Layer blending */
+ uint32_t l1bld;
+ uint32_t l2bld;
+ uint32_t l3bld;
+ uint32_t l4bld;
+ uint32_t l5bld;
+ uint32_t pad13;
+
+ /* Extended transparency control */
+ uint32_t l0etc;
+ uint32_t l1etc;
+ uint32_t l2etc;
+ uint32_t l3etc;
+ uint32_t l4etc;
+ uint32_t l5etc;
+ uint32_t pad14[10];
+
+ /* YUV coefficients */
+ uint32_t l1ycr0;
+ uint32_t l1ycr1;
+ uint32_t l1ycg0;
+ uint32_t l1ycg1;
+ uint32_t l1ycb0;
+ uint32_t l1ycb1;
+ uint32_t pad15[130];
+
+ /* Layer palletes */
+ uint32_t l0pal[256];
+ uint32_t l1pal[256];
+ uint32_t pad16[256];
+ uint32_t l2pal[256];
+ uint32_t l3pal[256];
+ uint32_t pad17[256];
+
+ /* PWM settings */
+ uint32_t vpwmm;
+ uint16_t vpwms;
+ uint16_t vpwme;
+ uint32_t vpwmc;
+ uint32_t pad18[253];
+};
+
+/* mb86r0x gdc capture controller */
+struct mb86r0x_gdc_cap {
+ uint32_t vcm;
+ uint32_t csc;
+ uint32_t vcs;
+ uint32_t pad01;
+
+ uint32_t cbm;
+ uint32_t cboa;
+ uint32_t cbla;
+ uint16_t cihstr;
+ uint16_t civstr;
+ uint16_t cihend;
+ uint16_t civend;
+ uint32_t pad02;
+
+ uint32_t chp;
+ uint32_t cvp;
+ uint32_t pad03[4];
+
+ uint32_t clpf;
+ uint32_t pad04;
+ uint32_t cmss;
+ uint32_t cmds;
+ uint32_t pad05[12];
+
+ uint32_t rgbhc;
+ uint32_t rgbhen;
+ uint32_t rgbven;
+ uint32_t pad06;
+ uint32_t rgbs;
+ uint32_t pad07[11];
+
+ uint32_t rgbcmy;
+ uint32_t rgbcmcb;
+ uint32_t rgbcmcr;
+ uint32_t rgbcmb;
+ uint32_t pad08[12 + 1984];
+};
+
+/* mb86r0x gdc draw */
+struct mb86r0x_gdc_draw {
+ uint32_t ys;
+ uint32_t xs;
+ uint32_t dxdy;
+ uint32_t xus;
+ uint32_t dxudy;
+ uint32_t xls;
+ uint32_t dxldy;
+ uint32_t usn;
+ uint32_t lsn;
+ uint32_t pad01[7];
+ uint32_t rs;
+ uint32_t drdx;
+ uint32_t drdy;
+ uint32_t gs;
+ uint32_t dgdx;
+ uint32_t dgdy;
+ uint32_t bs;
+ uint32_t dbdx;
+ uint32_t dbdy;
+ uint32_t pad02[7];
+ uint32_t zs;
+ uint32_t dzdx;
+ uint32_t dzdy;
+ uint32_t pad03[13];
+ uint32_t ss;
+ uint32_t dsdx;
+ uint32_t dsdy;
+ uint32_t ts;
+ uint32_t dtdx;
+ uint32_t dtdy;
+ uint32_t qs;
+ uint32_t dqdx;
+ uint32_t dqdy;
+ uint32_t pad04[23];
+ uint32_t lpn;
+ uint32_t lxs;
+ uint32_t lxde;
+ uint32_t lys;
+ uint32_t lyde;
+ uint32_t lzs;
+ uint32_t lzde;
+ uint32_t pad05[13];
+ uint32_t pxdc;
+ uint32_t pydc;
+ uint32_t pzdc;
+ uint32_t pad06[25];
+ uint32_t rxs;
+ uint32_t rys;
+ uint32_t rsizex;
+ uint32_t rsizey;
+ uint32_t pad07[12];
+ uint32_t saddr;
+ uint32_t sstride;
+ uint32_t srx;
+ uint32_t sry;
+ uint32_t daddr;
+ uint32_t dstride;
+ uint32_t drx;
+ uint32_t dry;
+ uint32_t brsizex;
+ uint32_t brsizey;
+ uint32_t tcolor;
+ uint32_t pad08[93];
+ uint32_t blpo;
+ uint32_t pad09[7];
+ uint32_t ctr;
+ uint32_t ifsr;
+ uint32_t ifcnt;
+ uint32_t sst;
+ uint32_t ds;
+ uint32_t pst;
+ uint32_t est;
+ uint32_t pad10;
+ uint32_t mdr0;
+ uint32_t mdr1;
+ uint32_t mdr2;
+ uint32_t mdr3;
+ uint32_t mdr4;
+ uint32_t pad14[2];
+ uint32_t mdr7;
+ uint32_t fbr;
+ uint32_t xres;
+ uint32_t zbr;
+ uint32_t tbr;
+ uint32_t pfbr;
+ uint32_t cxmin;
+ uint32_t cxmax;
+ uint32_t cymin;
+ uint32_t cymax;
+ uint32_t txs;
+ uint32_t tis;
+ uint32_t toa;
+ uint32_t sho;
+ uint32_t abr;
+ uint32_t pad15[2];
+ uint32_t fc;
+ uint32_t bc;
+ uint32_t alf;
+ uint32_t blp;
+ uint32_t pad16;
+ uint32_t tbc;
+ uint32_t pad11[42];
+ uint32_t lx0dc;
+ uint32_t ly0dc;
+ uint32_t lx1dc;
+ uint32_t ly1dc;
+ uint32_t pad12[12];
+ uint32_t x0dc;
+ uint32_t y0dc;
+ uint32_t x1dc;
+ uint32_t y1dc;
+ uint32_t x2dc;
+ uint32_t y2dc;
+ uint32_t pad13[666];
+};
+
+/* mb86r0x gdc geometry engine */
+struct mb86r0x_gdc_geom {
+ uint32_t gctr;
+ uint32_t pad00[15];
+ uint32_t gmdr0;
+ uint32_t gmdr1;
+ uint32_t gmdr2;
+ uint32_t pad01[237];
+ uint32_t dfifog;
+ uint32_t pad02[767];
+};
+
+/* mb86r0x gdc */
+struct mb86r0x_gdc {
+ uint32_t pad00[2];
+ uint32_t lts;
+ uint32_t pad01;
+ uint32_t lsta;
+ uint32_t pad02[3];
+ uint32_t ist;
+ uint32_t imask;
+ uint32_t pad03[6];
+ uint32_t lsa;
+ uint32_t lco;
+ uint32_t lreq;
+
+ uint32_t pad04[16*1024 - 19];
+ struct mb86r0x_gdc_dsp dsp0;
+ struct mb86r0x_gdc_dsp dsp1;
+ uint32_t pad05[4*1024 - 2];
+ uint32_t vccc;
+ uint32_t vcsr;
+ struct mb86r0x_gdc_cap cap0;
+ struct mb86r0x_gdc_cap cap1;
+ uint32_t pad06[4*1024];
+ uint32_t texture_base[16*1024];
+ struct mb86r0x_gdc_draw draw;
+ uint32_t pad07[7*1024];
+ struct mb86r0x_gdc_geom geom;
+ uint32_t pad08[7*1024];
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Physical Address Defines
+ */
+#define MB86R0x_DDR2_BASE 0xf3000000
+#define MB86R0x_GDC_BASE 0xf1fc0000
+#define MB86R0x_CCNT_BASE 0xfff42000
+#define MB86R0x_CAN0_BASE 0xfff54000
+#define MB86R0x_CAN1_BASE 0xfff55000
+#define MB86R0x_I2C0_BASE 0xfff56000
+#define MB86R0x_I2C1_BASE 0xfff57000
+#define MB86R0x_EHCI_BASE 0xfff80000
+#define MB86R0x_OHCI_BASE 0xfff81000
+#define MB86R0x_IRC1_BASE 0xfffb0000
+#define MB86R0x_MEMC_BASE 0xfffc0000
+#define MB86R0x_TIMER_BASE 0xfffe0000
+#define MB86R0x_UART0_BASE 0xfffe1000
+#define MB86R0x_UART1_BASE 0xfffe2000
+#define MB86R0x_IRCE_BASE 0xfffe4000
+#define MB86R0x_CRG_BASE 0xfffe7000
+#define MB86R0x_IRC0_BASE 0xfffe8000
+#define MB86R0x_GPIO_BASE 0xfffe9000
+#define MB86R0x_PWM0_BASE 0xfff41000
+#define MB86R0x_PWM1_BASE 0xfff41100
+
+#define MB86R0x_CRSR_SWRSTREQ (1 << 1)
+
+/*
+ * Timer register bits
+ */
+#define MB86R0x_TIMER_ENABLE (1 << 7)
+#define MB86R0x_TIMER_MODE_MSK (1 << 6)
+#define MB86R0x_TIMER_MODE_FR (0 << 6)
+#define MB86R0x_TIMER_MODE_PD (1 << 6)
+
+#define MB86R0x_TIMER_INT_EN (1 << 5)
+#define MB86R0x_TIMER_PRS_MSK (3 << 2)
+#define MB86R0x_TIMER_PRS_4S (1 << 2)
+#define MB86R0x_TIMER_PRS_8S (1 << 3)
+#define MB86R0x_TIMER_SIZE_32 (1 << 1)
+#define MB86R0x_TIMER_ONE_SHT (1 << 0)
+
+/*
+ * Clock reset generator bits
+ */
+#define MB86R0x_CRG_CRPR_PLLRDY (1 << 8)
+#define MB86R0x_CRG_CRPR_PLLMODE (0x1f << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X49 (0 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X46 (1 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X37 (2 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X20 (3 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X47 (4 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X44 (5 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X36 (6 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X19 (7 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X39 (8 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X38 (9 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X30 (10 << 0)
+#define MB86R0x_CRG_CRPR_PLLMODE_X15 (11 << 0)
+/*
+ * DDR2 controller bits
+ */
+#define MB86R0x_DDR2_DRCI_DRINI (1 << 15)
+#define MB86R0x_DDR2_DRCI_CKEN (1 << 14)
+#define MB86R0x_DDR2_DRCI_DRCMD (1 << 0)
+#define MB86R0x_DDR2_DRCI_CMD (MB86R0x_DDR2_DRCI_DRINI | \
+ MB86R0x_DDR2_DRCI_CKEN | \
+ MB86R0x_DDR2_DRCI_DRCMD)
+#define MB86R0x_DDR2_DRCI_INIT (MB86R0x_DDR2_DRCI_DRINI | \
+ MB86R0x_DDR2_DRCI_CKEN)
+#define MB86R0x_DDR2_DRCI_NORMAL MB86R0x_DDR2_DRCI_CKEN
+#endif /* MB86R0X_H */
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
|| defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \
- || defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) \
- || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) \
- || defined(CONFIG_SYS_SC520)
+ || defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) \
+ || defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) \
+ || defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520)
#if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL)
#if (CONFIG_CONS_INDEX==1)
return &eserial1_device;
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \
- defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \
- defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
- defined(CONFIG_SYS_SC520)
+ defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
+ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
+ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#if defined(CONFIG_SYS_NS16550_SERIAL)
projects / karo-tx-uboot.git / commitdiff