The architecture is unmaintained and dead, remove it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Michael Schwingen <michael@schwingen.org>
Cc: Tom Rini <trini@ti.com>
LIST_pxa="$(targets_by_cpu pxa)"
-LIST_ixp="$(targets_by_cpu ixp)"
-
#########################################################################
## SPEAr Systems
#########################################################################
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
/arm926ejs Files specific to ARM 926 CPUs
/arm1136 Files specific to ARM 1136 CPUs
- /ixp Files specific to Intel XScale IXP CPUs
/pxa Files specific to Intel XScale PXA CPUs
/sa1100 Files specific to Intel StrongARM SA1100 CPUs
/lib Architecture specific library files
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-extra-y = start.o
-
-obj-y += cpu.o
-obj-$(CONFIG_USE_IRQ) += interrupts.o
-obj-y += timer.o
+++ /dev/null
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-BIG_ENDIAN = y
-
-PLATFORM_RELFLAGS += -mbig-endian
-
-PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100
-
-PLATFORM_LDFLAGS += -EB
-USE_PRIVATE_LIBGCC = yes
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/arch/ixp425.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo (void)
-{
- unsigned long id;
- int speed = 0;
-
- asm ("mrc p15, 0, %0, c0, c0, 0":"=r" (id));
-
- puts("CPU: Intel IXP425 at ");
- switch ((id & 0x000003f0) >> 4) {
- case 0x1c:
- speed = 533;
- break;
-
- case 0x1d:
- speed = 400;
- break;
-
- case 0x1f:
- speed = 266;
- break;
- }
-
- if (speed)
- printf("%d MHz\n", speed);
- else
- puts("unknown revision\n");
-
- return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
-
-int cleanup_before_linux (void)
-{
- /*
- * this function is called just before we call linux
- * it prepares the processor for linux
- *
- * just disable everything that can disturb booting linux
- */
-
- disable_interrupts ();
-
- /* turn off I-cache */
- icache_disable();
- dcache_disable();
-
- /* flush I-cache */
- cache_flush();
-
- return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
- unsigned long i = 0;
-
- asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-}
-
-/* FIXME */
-/*
-void pci_init(void)
-{
- return;
-}
-*/
-
-int cpu_eth_init(bd_t *bis)
-{
-#ifdef CONFIG_IXP4XX_NPE
- npe_initialize(bis);
-#endif
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-#include <asm/proc-armv/ptrace.h>
-
-struct _irq_handler {
- void *m_data;
- void (*m_func)( void *data);
-};
-
-static struct _irq_handler IRQ_HANDLER[N_IRQS];
-
-static void default_isr(void *data)
-{
- printf("default_isr(): called for IRQ %d, Interrupt Status=%x PR=%x\n",
- (int)data, *IXP425_ICIP, *IXP425_ICIH);
-}
-
-static int next_irq(void)
-{
- return (((*IXP425_ICIH & 0x000000fc) >> 2) - 1);
-}
-
-void do_irq (struct pt_regs *pt_regs)
-{
- int irq = next_irq();
-
- IRQ_HANDLER[irq].m_func(IRQ_HANDLER[irq].m_data);
-}
-
-void irq_install_handler (int irq, interrupt_handler_t handle_irq, void *data)
-{
- if (irq >= N_IRQS || !handle_irq)
- return;
-
- IRQ_HANDLER[irq].m_data = data;
- IRQ_HANDLER[irq].m_func = handle_irq;
-}
-
-int arch_interrupt_init (void)
-{
- int i;
-
- /* install default interrupt handlers */
- for (i = 0; i < N_IRQS; i++)
- irq_install_handler(i, default_isr, (void *)i);
-
- /* configure interrupts for IRQ mode */
- *IXP425_ICLR = 0x00000000;
-
- return (0);
-}
+++ /dev/null
-/* vi: set ts=8 sw=8 noet: */
-/*
- * u-boot - Startup Code for XScale IXP
- *
- * Copyright (C) 2003 Kyle Harris <kharris@nexus-tech.net>
- *
- * Based on startup code example contained in the
- * Intel IXP4xx Programmer's Guide and past u-boot Start.S
- * samples.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-#include <asm/arch/ixp425.h>
-
-#define MMU_Control_M 0x001 /* Enable MMU */
-#define MMU_Control_A 0x002 /* Enable address alignment faults */
-#define MMU_Control_C 0x004 /* Enable cache */
-#define MMU_Control_W 0x008 /* Enable write-buffer */
-#define MMU_Control_P 0x010 /* Compatability: 32 bit code */
-#define MMU_Control_D 0x020 /* Compatability: 32 bit data */
-#define MMU_Control_L 0x040 /* Compatability: */
-#define MMU_Control_B 0x080 /* Enable Big-Endian */
-#define MMU_Control_S 0x100 /* Enable system protection */
-#define MMU_Control_R 0x200 /* Enable ROM protection */
-#define MMU_Control_I 0x1000 /* Enable Instruction cache */
-#define MMU_Control_X 0x2000 /* Set interrupt vectors at 0xFFFF0000 */
-#define MMU_Control_Init (MMU_Control_P|MMU_Control_D|MMU_Control_L)
-
-
-/*
- * Macro definitions
- */
- /* Delay a bit */
- .macro DELAY_FOR cycles, reg0
- ldr \reg0, =\cycles
- subs \reg0, \reg0, #1
- subne pc, pc, #0xc
- .endm
-
- /* wait for coprocessor write complete */
- .macro CPWAIT reg
- mrc p15,0,\reg,c2,c0,0
- mov \reg,\reg
- sub pc,pc,#4
- .endm
-
-.globl _start
-_start:
- ldr pc, _reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_reset: .word reset
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * - relocate armboot to ram
- * - setup stack
- * - jump to second stage
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
- .word CONFIG_SPL_TEXT_BASE
-#else
- .word CONFIG_SYS_TEXT_BASE
-#endif
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
- .word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
- .word __bss_end - _start
-
-.globl _end_ofs
-_end_ofs:
- .word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
- /* disable mmu, set big-endian */
- mov r0, #0xf8
- mcr p15, 0, r0, c1, c0, 0
- CPWAIT r0
-
- /* invalidate I & D caches & BTB */
- mcr p15, 0, r0, c7, c7, 0
- CPWAIT r0
-
- /* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
- CPWAIT r0
-
- /* drain write and fill buffers */
- mcr p15, 0, r0, c7, c10, 4
- CPWAIT r0
-
- /* disable write buffer coalescing */
- mrc p15, 0, r0, c1, c0, 1
- orr r0, r0, #1
- mcr p15, 0, r0, c1, c0, 1
- CPWAIT r0
-
- /* set EXP CS0 to the optimum timing */
- ldr r1, =CONFIG_SYS_EXP_CS0
- ldr r2, =IXP425_EXP_CS0
- str r1, [r2]
-
- /* make sure flash is visible at 0 */
- mov r1, #CONFIG_SYS_SDR_CONFIG
- ldr r2, =IXP425_SDR_CONFIG
- str r1, [r2]
-
- /* disable refresh cycles */
- mov r1, #0
- ldr r3, =IXP425_SDR_REFRESH
- str r1, [r3]
-
- /* send nop command */
- mov r1, #3
- ldr r4, =IXP425_SDR_IR
- str r1, [r4]
- DELAY_FOR 0x4000, r0
-
- /* set SDRAM internal refresh val */
- ldr r1, =CONFIG_SYS_SDRAM_REFRESH_CNT
- str r1, [r3]
- DELAY_FOR 0x4000, r0
-
- /* send precharge-all command to close all open banks */
- mov r1, #2
- str r1, [r4]
- DELAY_FOR 0x4000, r0
-
- /* provide 8 auto-refresh cycles */
- mov r1, #4
- mov r5, #8
-111: str r1, [r4]
- DELAY_FOR 0x100, r0
- subs r5, r5, #1
- bne 111b
-
- /* set mode register in sdram */
- mov r1, #CONFIG_SYS_SDR_MODE_CONFIG
- str r1, [r4]
- DELAY_FOR 0x4000, r0
-
- /* send normal operation command */
- mov r1, #6
- str r1, [r4]
- DELAY_FOR 0x4000, r0
-
- /* invalidate I & D caches & BTB */
- mcr p15, 0, r0, c7, c7, 0
- CPWAIT r0
-
- /* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
- CPWAIT r0
-
- /* drain write and fill buffers */
- mcr p15, 0, r0, c7, c10, 4
- CPWAIT r0
-
- /* remove flash mirror at 0x00000000 */
- ldr r2, =IXP425_EXP_CFG0
- ldr r1, [r2]
- bic r1, r1, #0x80000000
- str r1, [r2]
-
- /* invalidate I & Data TLB */
- mcr p15, 0, r0, c8, c7, 0
- CPWAIT r0
-
- /* enable I cache */
- mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #MMU_Control_I
- mcr p15, 0, r0, c1, c0, 0
- CPWAIT r0
-
- mrs r0,cpsr /* set the cpu to SVC32 mode */
- bic r0,r0,#0x1f /* (superviser mode, M=10011) */
- orr r0,r0,#0x13
- msr cpsr,r0
-
- bl _main
-
-/*------------------------------------------------------------------------------*/
-
- .globl c_runtime_cpu_setup
-c_runtime_cpu_setup:
-
- bx lr
-
-/****************************************************************************/
-/* */
-/* Interrupt handling */
-/* */
-/****************************************************************************/
-
-/* IRQ stack frame */
-
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-
- /* use bad_save_user_regs for abort/prefetch/undef/swi ... */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} /* Calling r0-r12 */
- add r8, sp, #S_PC
-
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r4} /* get pc, cpsr, old_r0 */
- add r0, sp, #S_FRAME_SIZE /* restore sp_SVC */
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r4} /* save sp_SVC, lr_SVC, pc, cpsr, old_r */
- mov r0, sp
- .endm
-
-
- /* use irq_save_user_regs / irq_restore_user_regs for */
- /* IRQ/FIQ handling */
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} /* Calling r0-r12 */
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ /* Calling SP, LR */
- str lr, [r8, #0] /* Save calling PC */
- mrs r6, spsr
- str r6, [r8, #4] /* Save CPSR */
- str r0, [r8, #8] /* Save OLD_R0 */
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- msr spsr_c, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-
-/****************************************************************************/
-/* */
-/* exception handlers */
-/* */
-/****************************************************************************/
-
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- irq_save_user_regs /* someone ought to write a more */
- bl do_fiq /* effiction fiq_save_user_regs */
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-
-/****************************************************************************/
-/* */
-/* Reset function: Use Watchdog to reset */
-/* */
-/****************************************************************************/
-
- .align 5
-.globl reset_cpu
-
-reset_cpu:
- ldr r1, =0x482e
- ldr r2, =IXP425_OSWK
- str r1, [r2]
- ldr r1, =0x0fff
- ldr r2, =IXP425_OSWT
- str r1, [r2]
- ldr r1, =0x5
- ldr r2, =IXP425_OSWE
- str r1, [r2]
- b reset_endless
-
-reset_endless:
- b reset_endless
+++ /dev/null
-/*
- * (C) Copyright 2010
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <div64.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * The IXP42x time-stamp timer runs at 2*OSC_IN (66.666MHz when using a
- * 33.333MHz crystal).
- */
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, CONFIG_IXP425_TIMER_CLK);
- return tick;
-}
-
-static inline unsigned long long time_to_tick(unsigned long long time)
-{
- time *= CONFIG_IXP425_TIMER_CLK;
- do_div(time, CONFIG_SYS_HZ);
- return time;
-}
-
-static inline unsigned long long us_to_tick(unsigned long long us)
-{
- us = us * CONFIG_IXP425_TIMER_CLK + 999999;
- do_div(us, 1000000);
- return us;
-}
-
-unsigned long long get_ticks(void)
-{
- ulong now = readl(IXP425_OSTS_B);
-
- if (readl(IXP425_OSST) & IXP425_OSST_TIMER_TS_PEND) {
- /* rollover of timestamp timer register */
- gd->arch.timestamp += (0xFFFFFFFF - gd->arch.lastinc) + now + 1;
- writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
- } else {
- /* move stamp forward with absolut diff ticks */
- gd->arch.timestamp += (now - gd->arch.lastinc);
- }
- gd->arch.lastinc = now;
- return gd->arch.timestamp;
-}
-
-
-void reset_timer_masked(void)
-{
- /* capture current timestamp counter */
- gd->arch.lastinc = readl(IXP425_OSTS_B);
- /* start "advancing" time stamp from 0 */
- gd->arch.timestamp = 0;
-}
-
-ulong get_timer_masked(void)
-{
- return tick_to_time(get_ticks());
-}
-
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
- unsigned long long tmp;
-
- tmp = get_ticks() + us_to_tick(usec);
-
- while (get_ticks() < tmp)
- ;
-}
-
-int timer_init(void)
-{
- writel(IXP425_OSST_TIMER_TS_PEND, IXP425_OSST);
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.__image_copy_start)
- arch/arm/cpu/ixp/start.o(.text*)
- *(.text*)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : {
- *(.data*)
- }
-
- . = ALIGN(4);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- . = ALIGN(4);
-
- .image_copy_end :
- {
- *(.__image_copy_end)
- }
-
- .rel_dyn_start :
- {
- *(.__rel_dyn_start)
- }
-
- .rel.dyn : {
- *(.rel*)
- }
-
- .rel_dyn_end :
- {
- *(.__rel_dyn_end)
- }
-
- _end = .;
-
-/*
- * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
- * __bss_base and __bss_limit are for linker only (overlay ordering)
- */
-
- .bss_start __rel_dyn_start (OVERLAY) : {
- KEEP(*(.__bss_start));
- __bss_base = .;
- }
-
- .bss __bss_base (OVERLAY) : {
- *(.bss*)
- . = ALIGN(4);
- __bss_limit = .;
- }
- .bss_end __bss_limit (OVERLAY) : {
- KEEP(*(.__bss_end));
- }
-
- .dynsym _end : { *(.dynsym) }
- .dynbss : { *(.dynbss) }
- .dynstr : { *(.dynstr*) }
- .dynamic : { *(.dynamic*) }
- .hash : { *(.hash*) }
- .plt : { *(.plt*) }
- .interp : { *(.interp*) }
- .gnu : { *(.gnu*) }
- .ARM.exidx : { *(.ARM.exidx*) }
-}
+++ /dev/null
-/*
- * include/asm-arm/arch-ixp425/ixp425.h
- *
- * Register definitions for IXP425
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_ARM_IXP425_H_
-#define _ASM_ARM_IXP425_H_
-
-#define BIT(x) (1<<(x))
-
-/* FIXME: Only this does work for u-boot... find out why... [RS] */
-#define UBOOT_REG_FIX 1
-#ifdef UBOOT_REG_FIX
-# undef io_p2v
-# undef __REG
-# ifndef __ASSEMBLY__
-# define io_p2v(PhAdd) (PhAdd)
-# define __REG(x) (*((volatile u32 *)io_p2v(x)))
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-# else
-# define __REG(x) (x)
-# endif
-#endif /* UBOOT_REG_FIX */
-
-/*
- *
- * IXP425 Memory map:
- *
- * Phy Phy Size Map Size Virt Description
- * =========================================================================
- *
- * 0x00000000 0x10000000 SDRAM 1
- *
- * 0x10000000 0x10000000 SDRAM 2
- *
- * 0x20000000 0x10000000 SDRAM 3
- *
- * 0x30000000 0x10000000 SDRAM 4
- *
- * The above four are aliases to the same memory location (0x00000000)
- *
- * 0x48000000 0x4000000 PCI Memory
- *
- * 0x50000000 0x10000000 Not Mapped EXP BUS
- *
- * 0x6000000 0x00004000 0x4000 0xFFFEB000 QMgr
- *
- * 0xC0000000 0x100 0x1000 0xFFFDD000 PCI CFG
- *
- * 0xC4000000 0x100 0x1000 0xFFFDE000 EXP CFG
- *
- * 0xC8000000 0xC000 0xC000 0xFFFDF000 PERIPHERAL
- *
- * 0xCC000000 0x100 0x1000 Not Mapped SDRAM CFG
- */
-
-/*
- * SDRAM
- */
-#define IXP425_SDRAM_BASE (0x00000000)
-#define IXP425_SDRAM_BASE_ALT (0x10000000)
-
-
-/*
- * PCI Configuration space
- */
-#define IXP425_PCI_CFG_BASE_PHYS (0xC0000000)
-#define IXP425_PCI_CFG_REGION_SIZE (0x00001000)
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP425_EXP_CFG_BASE_PHYS (0xC4000000)
-#define IXP425_EXP_CFG_REGION_SIZE (0x00001000)
-
-/*
- * Peripheral space
- */
-#define IXP425_PERIPHERAL_BASE_PHYS (0xC8000000)
-#define IXP425_PERIPHERAL_REGION_SIZE (0x0000C000)
-
-/*
- * SDRAM configuration registers
- */
-#define IXP425_SDRAM_CFG_BASE_PHYS (0xCC000000)
-
-/*
- * Q Manager space .. not static mapped
- */
-#define IXP425_QMGR_BASE_PHYS (0x60000000)
-#define IXP425_QMGR_REGION_SIZE (0x00004000)
-
-/*
- * Expansion BUS
- *
- * Expansion Bus 'lives' at either base1 or base 2 depending on the value of
- * Exp Bus config registers:
- *
- * Setting bit 31 of IXP425_EXP_CFG0 puts SDRAM at zero,
- * and The expansion bus to IXP425_EXP_BUS_BASE2
- */
-#define IXP425_EXP_BUS_BASE1_PHYS (0x00000000)
-#define IXP425_EXP_BUS_BASE2_PHYS (0x50000000)
-
-#define IXP425_EXP_BUS_BASE_PHYS IXP425_EXP_BUS_BASE2_PHYS
-
-#define IXP425_EXP_BUS_REGION_SIZE (0x08000000)
-#define IXP425_EXP_BUS_CSX_REGION_SIZE (0x01000000)
-
-#define IXP425_EXP_BUS_CS0_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x00000000)
-#define IXP425_EXP_BUS_CS1_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x01000000)
-#define IXP425_EXP_BUS_CS2_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x02000000)
-#define IXP425_EXP_BUS_CS3_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x03000000)
-#define IXP425_EXP_BUS_CS4_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x04000000)
-#define IXP425_EXP_BUS_CS5_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x05000000)
-#define IXP425_EXP_BUS_CS6_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x06000000)
-#define IXP425_EXP_BUS_CS7_BASE_PHYS (IXP425_EXP_BUS_BASE2_PHYS + 0x07000000)
-
-#define IXP425_FLASH_WRITABLE (0x2)
-#define IXP425_FLASH_DEFAULT (0xbcd23c40)
-#define IXP425_FLASH_WRITE (0xbcd23c42)
-
-#define IXP425_EXP_CS0_OFFSET 0x00
-#define IXP425_EXP_CS1_OFFSET 0x04
-#define IXP425_EXP_CS2_OFFSET 0x08
-#define IXP425_EXP_CS3_OFFSET 0x0C
-#define IXP425_EXP_CS4_OFFSET 0x10
-#define IXP425_EXP_CS5_OFFSET 0x14
-#define IXP425_EXP_CS6_OFFSET 0x18
-#define IXP425_EXP_CS7_OFFSET 0x1C
-#define IXP425_EXP_CFG0_OFFSET 0x20
-#define IXP425_EXP_CFG1_OFFSET 0x24
-#define IXP425_EXP_CFG2_OFFSET 0x28
-#define IXP425_EXP_CFG3_OFFSET 0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#ifndef __ASSEMBLY__
-#define IXP425_EXP_REG(x) ((volatile u32 *)(IXP425_EXP_CFG_BASE_PHYS+(x)))
-#else
-#define IXP425_EXP_REG(x) (IXP425_EXP_CFG_BASE_PHYS+(x))
-#endif
-
-#define IXP425_EXP_CS0 IXP425_EXP_REG(IXP425_EXP_CS0_OFFSET)
-#define IXP425_EXP_CS1 IXP425_EXP_REG(IXP425_EXP_CS1_OFFSET)
-#define IXP425_EXP_CS2 IXP425_EXP_REG(IXP425_EXP_CS2_OFFSET)
-#define IXP425_EXP_CS3 IXP425_EXP_REG(IXP425_EXP_CS3_OFFSET)
-#define IXP425_EXP_CS4 IXP425_EXP_REG(IXP425_EXP_CS4_OFFSET)
-#define IXP425_EXP_CS5 IXP425_EXP_REG(IXP425_EXP_CS5_OFFSET)
-#define IXP425_EXP_CS6 IXP425_EXP_REG(IXP425_EXP_CS6_OFFSET)
-#define IXP425_EXP_CS7 IXP425_EXP_REG(IXP425_EXP_CS7_OFFSET)
-
-#define IXP425_EXP_CFG0 IXP425_EXP_REG(IXP425_EXP_CFG0_OFFSET)
-#define IXP425_EXP_CFG1 IXP425_EXP_REG(IXP425_EXP_CFG1_OFFSET)
-#define IXP425_EXP_CFG2 IXP425_EXP_REG(IXP425_EXP_CFG2_OFFSET)
-#define IXP425_EXP_CFG3 IXP425_EXP_REG(IXP425_EXP_CFG3_OFFSET)
-
-/*
- * SDRAM Controller registers.
- */
-#define IXP425_SDR_CONFIG_OFFSET 0x00
-#define IXP425_SDR_REFRESH_OFFSET 0x04
-#define IXP425_SDR_IR_OFFSET 0x08
-
-#define IXP425_SDRAM_REG(x) (IXP425_SDRAM_CFG_BASE_PHYS+(x))
-
-#define IXP425_SDR_CONFIG IXP425_SDRAM_REG(IXP425_SDR_CONFIG_OFFSET)
-#define IXP425_SDR_REFRESH IXP425_SDRAM_REG(IXP425_SDR_REFRESH_OFFSET)
-#define IXP425_SDR_IR IXP425_SDRAM_REG(IXP425_SDR_IR_OFFSET)
-
-/*
- * UART registers
- */
-#define IXP425_UART1 0
-#define IXP425_UART2 0x1000
-
-#define IXP425_UART_RBR_OFFSET 0x00
-#define IXP425_UART_THR_OFFSET 0x00
-#define IXP425_UART_DLL_OFFSET 0x00
-#define IXP425_UART_IER_OFFSET 0x04
-#define IXP425_UART_DLH_OFFSET 0x04
-#define IXP425_UART_IIR_OFFSET 0x08
-#define IXP425_UART_FCR_OFFSET 0x00
-#define IXP425_UART_LCR_OFFSET 0x0c
-#define IXP425_UART_MCR_OFFSET 0x10
-#define IXP425_UART_LSR_OFFSET 0x14
-#define IXP425_UART_MSR_OFFSET 0x18
-#define IXP425_UART_SPR_OFFSET 0x1c
-#define IXP425_UART_ISR_OFFSET 0x20
-
-#define IXP425_UART_CFG_BASE_PHYS (0xc8000000)
-
-#define RBR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_RBR_OFFSET)
-#define THR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_THR_OFFSET)
-#define DLL(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLL_OFFSET)
-#define IER(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IER_OFFSET)
-#define DLH(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_DLH_OFFSET)
-#define IIR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_IIR_OFFSET)
-#define FCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_FCR_OFFSET)
-#define LCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LCR_OFFSET)
-#define MCR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MCR_OFFSET)
-#define LSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_LSR_OFFSET)
-#define MSR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_MSR_OFFSET)
-#define SPR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_SPR_OFFSET)
-#define ISR(x) __REG(IXP425_UART_CFG_BASE_PHYS+(x)+IXP425_UART_ISR_OFFSET)
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4) */
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-#define IXP425_CONSOLE_UART_BASE_PHYS IXP425_UART1_BASE_PHYS
-/*
- * Peripheral Space Registers
- */
-#define IXP425_UART1_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP425_UART2_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP425_PMU_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP425_INTC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP425_GPIO_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP425_TIMER_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP425_NPEA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP425_NPEB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP425_NPEC_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP425_EthA_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP425_EthB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP425_USB_BASE_PHYS (IXP425_PERIPHERAL_BASE_PHYS + 0xB000)
-
-/*
- * UART Register Definitions , Offsets only as there are 2 UARTS.
- * IXP425_UART1_BASE , IXP425_UART2_BASE.
- */
-
-#undef UART_NO_RX_INTERRUPT
-
-#define IXP425_UART_XTAL 14745600
-
-/*
- * Constants to make it easy to access Interrupt Controller registers
- */
-#define IXP425_ICPR_OFFSET 0x00 /* Interrupt Status */
-#define IXP425_ICMR_OFFSET 0x04 /* Interrupt Enable */
-#define IXP425_ICLR_OFFSET 0x08 /* Interrupt IRQ/FIQ Select */
-#define IXP425_ICIP_OFFSET 0x0C /* IRQ Status */
-#define IXP425_ICFP_OFFSET 0x10 /* FIQ Status */
-#define IXP425_ICHR_OFFSET 0x14 /* Interrupt Priority */
-#define IXP425_ICIH_OFFSET 0x18 /* IRQ Highest Pri Int */
-#define IXP425_ICFH_OFFSET 0x1C /* FIQ Highest Pri Int */
-
-#define N_IRQS 32
-#define IXP425_TIMER_2_IRQ 11
-
-/*
- * Interrupt Controller Register Definitions.
- */
-#ifndef __ASSEMBLY__
-#define IXP425_INTC_REG(x) ((volatile u32 *)(IXP425_INTC_BASE_PHYS+(x)))
-#else
-#define IXP425_INTC_REG(x) (IXP425_INTC_BASE_PHYS+(x))
-#endif
-
-#define IXP425_ICPR IXP425_INTC_REG(IXP425_ICPR_OFFSET)
-#define IXP425_ICMR IXP425_INTC_REG(IXP425_ICMR_OFFSET)
-#define IXP425_ICLR IXP425_INTC_REG(IXP425_ICLR_OFFSET)
-#define IXP425_ICIP IXP425_INTC_REG(IXP425_ICIP_OFFSET)
-#define IXP425_ICFP IXP425_INTC_REG(IXP425_ICFP_OFFSET)
-#define IXP425_ICHR IXP425_INTC_REG(IXP425_ICHR_OFFSET)
-#define IXP425_ICIH IXP425_INTC_REG(IXP425_ICIH_OFFSET)
-#define IXP425_ICFH IXP425_INTC_REG(IXP425_ICFH_OFFSET)
-
-/*
- * Constants to make it easy to access GPIO registers
- */
-#define IXP425_GPIO_GPOUTR_OFFSET 0x00
-#define IXP425_GPIO_GPOER_OFFSET 0x04
-#define IXP425_GPIO_GPINR_OFFSET 0x08
-#define IXP425_GPIO_GPISR_OFFSET 0x0C
-#define IXP425_GPIO_GPIT1R_OFFSET 0x10
-#define IXP425_GPIO_GPIT2R_OFFSET 0x14
-#define IXP425_GPIO_GPCLKR_OFFSET 0x18
-#define IXP425_GPIO_GPDBSELR_OFFSET 0x1C
-
-/*
- * GPIO Register Definitions.
- * [Only perform 32bit reads/writes]
- */
-#define IXP425_GPIO_REG(x) ((volatile u32 *)(IXP425_GPIO_BASE_PHYS+(x)))
-
-#define IXP425_GPIO_GPOUTR IXP425_GPIO_REG(IXP425_GPIO_GPOUTR_OFFSET)
-#define IXP425_GPIO_GPOER IXP425_GPIO_REG(IXP425_GPIO_GPOER_OFFSET)
-#define IXP425_GPIO_GPINR IXP425_GPIO_REG(IXP425_GPIO_GPINR_OFFSET)
-#define IXP425_GPIO_GPISR IXP425_GPIO_REG(IXP425_GPIO_GPISR_OFFSET)
-#define IXP425_GPIO_GPIT1R IXP425_GPIO_REG(IXP425_GPIO_GPIT1R_OFFSET)
-#define IXP425_GPIO_GPIT2R IXP425_GPIO_REG(IXP425_GPIO_GPIT2R_OFFSET)
-#define IXP425_GPIO_GPCLKR IXP425_GPIO_REG(IXP425_GPIO_GPCLKR_OFFSET)
-#define IXP425_GPIO_GPDBSELR IXP425_GPIO_REG(IXP425_GPIO_GPDBSELR_OFFSET)
-
-#define IXP425_GPIO_GPITR(line) (((line) >= 8) ? \
- IXP425_GPIO_GPIT2R : IXP425_GPIO_GPIT1R)
-
-/*
- * Macros to make it easy to access the GPIO registers
- */
-#define GPIO_OUTPUT_ENABLE(line) *IXP425_GPIO_GPOER &= ~(1 << (line))
-#define GPIO_OUTPUT_DISABLE(line) *IXP425_GPIO_GPOER |= (1 << (line))
-#define GPIO_OUTPUT_SET(line) *IXP425_GPIO_GPOUTR |= (1 << (line))
-#define GPIO_OUTPUT_CLEAR(line) *IXP425_GPIO_GPOUTR &= ~(1 << (line))
-#define GPIO_INT_ACT_LOW_SET(line) \
- *IXP425_GPIO_GPITR(line) = \
- (*IXP425_GPIO_GPITR(line) & \
- ~(0x7 << (((line) & 0x7) * 3))) | \
- (0x1 << (((line) & 0x7) * 3)) \
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP425_OSTS_OFFSET 0x00 /* Continious TimeStamp */
-#define IXP425_OST1_OFFSET 0x04 /* Timer 1 Timestamp */
-#define IXP425_OSRT1_OFFSET 0x08 /* Timer 1 Reload */
-#define IXP425_OST2_OFFSET 0x0C /* Timer 2 Timestamp */
-#define IXP425_OSRT2_OFFSET 0x10 /* Timer 2 Reload */
-#define IXP425_OSWT_OFFSET 0x14 /* Watchdog Timer */
-#define IXP425_OSWE_OFFSET 0x18 /* Watchdog Enable */
-#define IXP425_OSWK_OFFSET 0x1C /* Watchdog Key */
-#define IXP425_OSST_OFFSET 0x20 /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#ifndef __ASSEMBLY__
-#define IXP425_TIMER_REG(x) ((volatile u32 *)(IXP425_TIMER_BASE_PHYS+(x)))
-#else
-#define IXP425_TIMER_REG(x) (IXP425_TIMER_BASE_PHYS+(x))
-#endif
-
-/* _B to avoid collision: also defined in npe/include/... */
-#define IXP425_OSTS_B IXP425_TIMER_REG(IXP425_OSTS_OFFSET)
-#define IXP425_OST1 IXP425_TIMER_REG(IXP425_OST1_OFFSET)
-#define IXP425_OSRT1 IXP425_TIMER_REG(IXP425_OSRT1_OFFSET)
-#define IXP425_OST2 IXP425_TIMER_REG(IXP425_OST2_OFFSET)
-#define IXP425_OSRT2 IXP425_TIMER_REG(IXP425_OSRT2_OFFSET)
-#define IXP425_OSWT IXP425_TIMER_REG(IXP425_OSWT_OFFSET)
-#define IXP425_OSWE IXP425_TIMER_REG(IXP425_OSWE_OFFSET)
-#define IXP425_OSWK IXP425_TIMER_REG(IXP425_OSWK_OFFSET)
-#define IXP425_OSST IXP425_TIMER_REG(IXP425_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions
- */
-#define IXP425_OST_ENABLE BIT(0)
-#define IXP425_OST_ONE_SHOT BIT(1)
-/* Low order bits of reload value ignored */
-#define IXP425_OST_RELOAD_MASK (0x3)
-#define IXP425_OST_DISABLED (0x0)
-#define IXP425_OSST_TIMER_1_PEND BIT(0)
-#define IXP425_OSST_TIMER_2_PEND BIT(1)
-#define IXP425_OSST_TIMER_TS_PEND BIT(2)
-#define IXP425_OSST_TIMER_WDOG_PEND BIT(3)
-#define IXP425_OSST_TIMER_WARM_RESET BIT(4)
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET 0x00
-#define PCI_NP_CBE_OFFSET 0x04
-#define PCI_NP_WDATA_OFFSET 0x08
-#define PCI_NP_RDATA_OFFSET 0x0c
-#define PCI_CRP_AD_CBE_OFFSET 0x10
-#define PCI_CRP_WDATA_OFFSET 0x14
-#define PCI_CRP_RDATA_OFFSET 0x18
-#define PCI_CSR_OFFSET 0x1c
-#define PCI_ISR_OFFSET 0x20
-#define PCI_INTEN_OFFSET 0x24
-#define PCI_DMACTRL_OFFSET 0x28
-#define PCI_AHBMEMBASE_OFFSET 0x2c
-#define PCI_AHBIOBASE_OFFSET 0x30
-#define PCI_PCIMEMBASE_OFFSET 0x34
-#define PCI_AHBDOORBELL_OFFSET 0x38
-#define PCI_PCIDOORBELL_OFFSET 0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET 0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET 0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define IXP425_PCI_CSR(x) ((volatile u32 *)(IXP425_PCI_CFG_BASE_PHYS+(x)))
-
-#define PCI_NP_AD IXP425_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE IXP425_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA IXP425_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA IXP425_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE IXP425_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA IXP425_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA IXP425_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR IXP425_PCI_CSR(PCI_CSR_OFFSET)
-#define PCI_ISR IXP425_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN IXP425_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL IXP425_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE IXP425_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE IXP425_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE IXP425_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL IXP425_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL IXP425_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR IXP425_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR IXP425_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR IXP425_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR IXP425_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST BIT(0)
-#define PCI_CSR_ARBEN BIT(1)
-#define PCI_CSR_ADS BIT(2)
-#define PCI_CSR_PDS BIT(3)
-#define PCI_CSR_ABE BIT(4)
-#define PCI_CSR_DBT BIT(5)
-#define PCI_CSR_ASE BIT(8)
-#define PCI_CSR_IC BIT(15)
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE BIT(0)
-#define PCI_ISR_PFE BIT(1)
-#define PCI_ISR_PPE BIT(2)
-#define PCI_ISR_AHBE BIT(3)
-#define PCI_ISR_APDC BIT(4)
-#define PCI_ISR_PADC BIT(5)
-#define PCI_ISR_ADB BIT(6)
-#define PCI_ISR_PDB BIT(7)
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE BIT(0)
-#define PCI_INTEN_PFE BIT(1)
-#define PCI_INTEN_PPE BIT(2)
-#define PCI_INTEN_AHBE BIT(3)
-#define PCI_INTEN_APDC BIT(4)
-#define PCI_INTEN_PADC BIT(5)
-#define PCI_INTEN_ADB BIT(6)
-#define PCI_INTEN_PDB BIT(7)
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP425_PCI_NP_CBE_BESL 4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD 0x2
-#define NP_CMD_IOWRITE 0x3
-#define NP_CMD_CONFIGREAD 0xa
-#define NP_CMD_CONFIGWRITE 0xb
-#define NP_CMD_MEMREAD 0x6
-#define NP_CMD_MEMWRITE 0x7
-
-#if 0
-#ifndef __ASSEMBLY__
-extern int ixp425_pci_read(u32 addr, u32 cmd, u32* data);
-extern int ixp425_pci_write(u32 addr, u32 cmd, u32 data);
-extern void ixp425_pci_init(void *);
-#endif
-#endif
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL 20
-#define CRP_AD_CBE_WRITE BIT(16)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP425_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-
-
-#endif
+++ /dev/null
-/*
- * IXP PCI Init
- * (C) Copyright 2004 eslab.whut.edu.cn
- * Yue Hu(huyue_whut@yahoo.com.cn), Ligong Xue(lgxue@hotmail.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _IXP425PCI_H
-#define _IXP425PCI_H
-
-#define OK 0
-#define ERROR -1
-
-struct pci_controller;
-extern void pci_ixp_init(struct pci_controller *hose);
-
-/* Mask definitions*/
-#define IXP425_PCI_BOTTOM_NIBBLE_OF_LONG_MASK 0x0000000f
-
-#define PCI_NP_CBE_BESL (4)
-#define PCI_NP_AD_FUNCSL (8)
-
-/*Register addressing definitions for PCI controller configuration
- and status registers*/
-
-#define PCI_CSR_BASE (0xC0000000)
-/*
-#define PCI_NP_AD_OFFSET (0x00)
-#define PCI_NP_CBE_OFFSET (0x04)
-#define PCI_NP_WDATA_OFFSET (0x08)
-#define PCI_NP_RDATA_OFFSET (0x0C)
-#define PCI_CRP_OFFSET (0x10)
-#define PCI_CRP_WDATA_OFFSET (0x14)
-#define PCI_CRP_RDATA_OFFSET (0x18)
-#define PCI_CSR_OFFSET (0x1C)
-#define PCI_ISR_OFFSET (0x20)
-#define PCI_INTEN_OFFSET (0x24)
-#define PCI_DMACTRL_OFFSET (0x28)
-#define PCI_AHBMEMBASE_OFFSET (0x2C)
-#define PCI_AHBIOBASE_OFFSET (0x30)
-#define PCI_PCIMEMBASE_OFFSET (0x34)
-#define PCI_AHBDOORBELL_OFFSET (0x38)
-#define PCI_PCIDOORBELL_OFFSET (0x3C)
-#define PCI_ATPDMA0_AHBADDR (0x40)
-#define PCI_ATPDMA0_PCIADDR (0x44)
-#define PCI_ATPDMA0_LENADDR (0x48)
-#define PCI_ATPDMA1_AHBADDR (0x4C)
-#define PCI_ATPDMA1_PCIADDR (0x50)
-#define PCI_ATPDMA1_LENADDR (0x54)
-#define PCI_PTADMA0_AHBADDR (0x58)
-#define PCI_PTADMA0_PCIADDR (0x5C)
-#define PCI_PTADMA0_LENADDR (0x60)
-#define PCI_PTADMA1_AHBADDR (0x64)
-#define PCI_PTADMA1_PCIADDR (0x68)
-#define PCI_PTADMA1_LENADDR (0x6C)
-*/
-/*Non prefetch registers bit definitions*/
-/*
-#define NP_CMD_INTACK (0x0)
-#define NP_CMD_SPECIAL (0x1)
-#define NP_CMD_IOREAD (0x2)
-#define NP_CMD_IOWRITE (0x3)
-#define NP_CMD_MEMREAD (0x6)
-#define NP_CMD_MEMWRITE (0x7)
-#define NP_CMD_CONFIGREAD (0xa)
-#define NP_CMD_CONFIGWRITE (0xb)
-*/
-
-/*Configuration Port register bit definitions*/
-#define PCI_CRP_WRITE BIT(16)
-
-/*ISR (Interrupt status) Register bit definitions*/
-#define PCI_ISR_PSE BIT(0)
-#define PCI_ISR_PFE BIT(1)
-#define PCI_ISR_PPE BIT(2)
-#define PCI_ISR_AHBE BIT(3)
-#define PCI_ISR_APDC BIT(4)
-#define PCI_ISR_PADC BIT(5)
-#define PCI_ISR_ADB BIT(6)
-#define PCI_ISR_PDB BIT(7)
-
-/*INTEN (Interrupt Enable) Register bit definitions*/
-#define PCI_INTEN_PSE BIT(0)
-#define PCI_INTEN_PFE BIT(1)
-#define PCI_INTEN_PPE BIT(2)
-#define PCI_INTEN_AHBE BIT(3)
-#define PCI_INTEN_APDC BIT(4)
-#define PCI_INTEN_PADC BIT(5)
-#define PCI_INTEN_ADB BIT(6)
-#define PCI_INTEN_PDB BIT(7)
-
-/*PCI configuration regs.*/
-
-#define PCI_CFG_VENDOR_ID 0x00
-#define PCI_CFG_DEVICE_ID 0x02
-#define PCI_CFG_COMMAND 0x04
-#define PCI_CFG_STATUS 0x06
-#define PCI_CFG_REVISION 0x08
-#define PCI_CFG_PROGRAMMING_IF 0x09
-#define PCI_CFG_SUBCLASS 0x0a
-#define PCI_CFG_CLASS 0x0b
-#define PCI_CFG_CACHE_LINE_SIZE 0x0c
-#define PCI_CFG_LATENCY_TIMER 0x0d
-#define PCI_CFG_HEADER_TYPE 0x0e
-#define PCI_CFG_BIST 0x0f
-#define PCI_CFG_BASE_ADDRESS_0 0x10
-#define PCI_CFG_BASE_ADDRESS_1 0x14
-#define PCI_CFG_BASE_ADDRESS_2 0x18
-#define PCI_CFG_BASE_ADDRESS_3 0x1c
-#define PCI_CFG_BASE_ADDRESS_4 0x20
-#define PCI_CFG_BASE_ADDRESS_5 0x24
-#define PCI_CFG_CIS 0x28
-#define PCI_CFG_SUB_VENDOR_ID 0x2c
-#define PCI_CFG_SUB_SYSTEM_ID 0x2e
-#define PCI_CFG_EXPANSION_ROM 0x30
-#define PCI_CFG_RESERVED_0 0x34
-#define PCI_CFG_RESERVED_1 0x38
-#define PCI_CFG_DEV_INT_LINE 0x3c
-#define PCI_CFG_DEV_INT_PIN 0x3d
-#define PCI_CFG_MIN_GRANT 0x3e
-#define PCI_CFG_MAX_LATENCY 0x3f
-#define PCI_CFG_SPECIAL_USE 0x41
-#define PCI_CFG_MODE 0x43
-
-#define PCI_CMD_IO_ENABLE 0x0001 /* IO access enable */
-#define PCI_CMD_MEM_ENABLE 0x0002 /* memory access enable */
-#define PCI_CMD_MASTER_ENABLE 0x0004 /* bus master enable */
-#define PCI_CMD_MON_ENABLE 0x0008 /* monitor special cycles enable */
-#define PCI_CMD_WI_ENABLE 0x0010 /* write and invalidate enable */
-#define PCI_CMD_SNOOP_ENABLE 0x0020 /* palette snoop enable */
-#define PCI_CMD_PERR_ENABLE 0x0040 /* parity error enable */
-#define PCI_CMD_WC_ENABLE 0x0080 /* wait cycle enable */
-#define PCI_CMD_SERR_ENABLE 0x0100 /* system error enable */
-#define PCI_CMD_FBTB_ENABLE 0x0200 /* fast back to back enable */
-
-
-/*CSR Register bit definitions*/
-#define PCI_CSR_HOST BIT(0)
-#define PCI_CSR_ARBEN BIT(1)
-#define PCI_CSR_ADS BIT(2)
-#define PCI_CSR_PDS BIT(3)
-#define PCI_CSR_ABE BIT(4)
-#define PCI_CSR_DBT BIT(5)
-#define PCI_CSR_ASE BIT(8)
-#define PCI_CSR_IC BIT(15)
-
-/*Configuration command bit definitions*/
-#define PCI_CFG_CMD_IOAE BIT(0)
-#define PCI_CFG_CMD_MAE BIT(1)
-#define PCI_CFG_CMD_BME BIT(2)
-#define PCI_CFG_CMD_MWIE BIT(4)
-#define PCI_CFG_CMD_SER BIT(8)
-#define PCI_CFG_CMD_FBBE BIT(9)
-#define PCI_CFG_CMD_MDPE BIT(24)
-#define PCI_CFG_CMD_STA BIT(27)
-#define PCI_CFG_CMD_RTA BIT(28)
-#define PCI_CFG_CMD_RMA BIT(29)
-#define PCI_CFG_CMD_SSE BIT(30)
-#define PCI_CFG_CMD_DPE BIT(31)
-
-/*DMACTRL DMA Control and status Register*/
-#define PCI_DMACTRL_APDCEN BIT(0)
-#define PCI_DMACTRL_APDC0 BIT(4)
-#define PCI_DMACTRL_APDE0 BIT(5)
-#define PCI_DMACTRL_APDC1 BIT(6)
-#define PCI_DMACTRL_APDE1 BIT(7)
-#define PCI_DMACTRL_PADCEN BIT(8)
-#define PCI_DMACTRL_PADC0 BIT(12)
-#define PCI_DMACTRL_PADE0 BIT(13)
-#define PCI_DMACTRL_PADC1 BIT(14)
-#define PCI_DMACTRL_PADE1 BIT(15)
-
-#endif
unsigned long tbl;
unsigned long lastinc;
unsigned long long timer_reset_value;
-#ifdef CONFIG_IXP425
- unsigned long timestamp;
-#endif
#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
unsigned long tlb_addr;
unsigned long tlb_size;
#include <asm/arch/gpio.h>
#endif
#endif
-#ifdef CONFIG_IXP425 /* only valid for IXP425 */
-#include <asm/arch/ixp425.h>
-#endif
#if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
#include <asm/io.h>
#endif
projects / karo-tx-uboot.git / commitdiff