]> git.karo-electronics.de Git - mv-sheeva.git/blob - arch/mips/loongson/lemote-2f/irq.c
50e7bb6012b75f9ad8a9f347b47f34a0ca9c0e04
[mv-sheeva.git] / arch / mips / loongson / lemote-2f / irq.c
1 /*
2  * Copyright (C) 2007 Lemote Inc.
3  * Author: Fuxin Zhang, zhangfx@lemote.com
4  *
5  *  This program is free software; you can redistribute  it and/or modify it
6  *  under  the terms of  the GNU General  Public License as published by the
7  *  Free Software Foundation;  either version 2 of the  License, or (at your
8  *  option) any later version.
9  */
10
11 #include <linux/interrupt.h>
12
13 #include <asm/irq_cpu.h>
14 #include <asm/i8259.h>
15 #include <asm/mipsregs.h>
16
17 #include <loongson.h>
18 #include <machine.h>
19
20 #define LOONGSON_TIMER_IRQ      (MIPS_CPU_IRQ_BASE + 7) /* cpu timer */
21 #define LOONGSON_PERFCNT_IRQ    (MIPS_CPU_IRQ_BASE + 6) /* cpu perf counter */
22 #define LOONGSON_NORTH_BRIDGE_IRQ       (MIPS_CPU_IRQ_BASE + 6) /* bonito */
23 #define LOONGSON_UART_IRQ       (MIPS_CPU_IRQ_BASE + 3) /* cpu serial port */
24 #define LOONGSON_SOUTH_BRIDGE_IRQ       (MIPS_CPU_IRQ_BASE + 2) /* i8259 */
25
26 #define LOONGSON_INT_BIT_INT0           (1 << 11)
27 #define LOONGSON_INT_BIT_INT1           (1 << 12)
28
29 /*
30  * The generic i8259_irq() make the kernel hang on booting.  Since we cannot
31  * get the irq via the IRR directly, we access the ISR instead.
32  */
33 static inline int mach_i8259_irq(void)
34 {
35         int irq, isr;
36
37         irq = -1;
38
39         if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) {
40                 spin_lock(&i8259A_lock);
41                 isr = inb(PIC_MASTER_CMD) &
42                         ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR);
43                 if (!isr)
44                         isr = (inb(PIC_SLAVE_CMD) & ~inb(PIC_SLAVE_IMR)) << 8;
45                 irq = ffs(isr) - 1;
46                 if (unlikely(irq == 7)) {
47                         /*
48                          * This may be a spurious interrupt.
49                          *
50                          * Read the interrupt status register (ISR). If the most
51                          * significant bit is not set then there is no valid
52                          * interrupt.
53                          */
54                         outb(0x0B, PIC_MASTER_ISR);     /* ISR register */
55                         if (~inb(PIC_MASTER_ISR) & 0x80)
56                                 irq = -1;
57                 }
58                 spin_unlock(&i8259A_lock);
59         }
60
61         return irq;
62 }
63
64 static void i8259_irqdispatch(void)
65 {
66         int irq;
67
68         irq = mach_i8259_irq();
69         if (irq >= 0)
70                 do_IRQ(irq);
71         else
72                 spurious_interrupt();
73 }
74
75 void mach_irq_dispatch(unsigned int pending)
76 {
77         if (pending & CAUSEF_IP7)
78                 do_IRQ(LOONGSON_TIMER_IRQ);
79         else if (pending & CAUSEF_IP6) {        /* North Bridge, Perf counter */
80 #ifdef CONFIG_OPROFILE
81                 do_IRQ(LOONGSON2_PERFCNT_IRQ);
82 #endif
83                 bonito_irqdispatch();
84         } else if (pending & CAUSEF_IP3)        /* CPU UART */
85                 do_IRQ(LOONGSON_UART_IRQ);
86         else if (pending & CAUSEF_IP2)  /* South Bridge */
87                 i8259_irqdispatch();
88         else
89                 spurious_interrupt();
90 }
91
92 void __init set_irq_trigger_mode(void)
93 {
94         /* setup cs5536 as high level trigger */
95         LOONGSON_INTPOL = LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1;
96         LOONGSON_INTEDGE &= ~(LOONGSON_INT_BIT_INT0 | LOONGSON_INT_BIT_INT1);
97 }
98
99 static irqreturn_t ip6_action(int cpl, void *dev_id)
100 {
101         return IRQ_HANDLED;
102 }
103
104 struct irqaction ip6_irqaction = {
105         .handler = ip6_action,
106         .name = "cascade",
107         .flags = IRQF_SHARED,
108 };
109
110 struct irqaction cascade_irqaction = {
111         .handler = no_action,
112         .name = "cascade",
113 };
114
115 void __init mach_init_irq(void)
116 {
117         /* init all controller
118          *   0-15         ------> i8259 interrupt
119          *   16-23        ------> mips cpu interrupt
120          *   32-63        ------> bonito irq
121          */
122
123         /* Sets the first-level interrupt dispatcher. */
124         mips_cpu_irq_init();
125         init_i8259_irqs();
126         bonito_irq_init();
127
128         /* setup north bridge irq (bonito) */
129         setup_irq(LOONGSON_NORTH_BRIDGE_IRQ, &ip6_irqaction);
130         /* setup source bridge irq (i8259) */
131         setup_irq(LOONGSON_SOUTH_BRIDGE_IRQ, &cascade_irqaction);
132 }