#include <linux/io.h>
#include <linux/netdevice.h>
#include <linux/cache.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
#include <linux/ethtool.h>
#include <linux/uaccess.h>
#include <linux/slab.h>
#include "reg.h"
#include "debug.h"
#include "ani.h"
-#include "../debug.h"
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+int ath5k_modparam_nohwcrypt;
+module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO);
MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
static int modparam_all_channels;
MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
-
-static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
-static int ath5k_beacon_update(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif);
-static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
-
-/* Known PCI ids */
-static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
- { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
- { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
- { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
- { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
- { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
- { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
- { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
- { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
- { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
- { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
- { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
- { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
- { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
- { 0 }
-};
-MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+static int ath5k_init(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+ bool skip_pcu);
+int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
/* Known SREVs */
static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATHEROS_AR231X
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R2 },
+ { "5312", AR5K_VERSION_MAC, AR5K_SREV_AR5312_R7 },
+ { "2313", AR5K_VERSION_MAC, AR5K_SREV_AR2313_R8 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R6 },
+ { "2315", AR5K_VERSION_MAC, AR5K_SREV_AR2315_R7 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R1 },
+ { "2317", AR5K_VERSION_MAC, AR5K_SREV_AR2317_R2 },
+#else
{ "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
{ "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
{ "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
{ "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
{ "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
{ "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
+#endif
{ "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
{ "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
{ "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
{ "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
{ "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
{ "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
- { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
- { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
{ "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
{ "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATHEROS_AR231X
+ { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
+ { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
+#endif
{ "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
};
/* XR missing */
};
-static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
- struct ath5k_buf *bf)
-{
- BUG_ON(!bf);
- if (!bf->skb)
- return;
- pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
- PCI_DMA_TODEVICE);
- dev_kfree_skb_any(bf->skb);
- bf->skb = NULL;
- bf->skbaddr = 0;
- bf->desc->ds_data = 0;
-}
-
-static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
- struct ath5k_buf *bf)
-{
- struct ath5k_hw *ah = sc->ah;
- struct ath_common *common = ath5k_hw_common(ah);
-
- BUG_ON(!bf);
- if (!bf->skb)
- return;
- pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
- PCI_DMA_FROMDEVICE);
- dev_kfree_skb_any(bf->skb);
- bf->skb = NULL;
- bf->skbaddr = 0;
- bf->desc->ds_data = 0;
-}
-
-
static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
{
u64 tsf = ath5k_hw_get_tsf64(ah);
return (tsf & ~0x7fff) | rstamp;
}
-static const char *
+const char *
ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
{
const char *name = "xxxxx";
switch (mode) {
case AR5K_MODE_11A:
- case AR5K_MODE_11A_TURBO:
/* 1..220, but 2GHz frequencies are filtered by check_channel */
size = 220 ;
chfreq = CHANNEL_5GHZ;
break;
case AR5K_MODE_11B:
case AR5K_MODE_11G:
- case AR5K_MODE_11G_TURBO:
size = 26;
chfreq = CHANNEL_2GHZ;
break;
case AR5K_MODE_11G:
channels[count].hw_value = chfreq | CHANNEL_OFDM;
break;
- case AR5K_MODE_11A_TURBO:
- case AR5K_MODE_11G_TURBO:
- channels[count].hw_value = chfreq |
- CHANNEL_OFDM | CHANNEL_TURBO;
- break;
case AR5K_MODE_11B:
channels[count].hw_value = CHANNEL_B;
}
*
* Called with sc->lock.
*/
-static int
+int
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(sc, chan);
+ return ath5k_reset(sc, chan, true);
}
static void
/* Calculate combined mode - when APs are active, operate in AP mode.
* Otherwise use the mode of the new interface. This can currently
* only deal with combinations of APs and STAs. Only one ad-hoc
- * interfaces is allowed above.
+ * interfaces is allowed.
*/
if (avf->opmode == NL80211_IFTYPE_AP)
iter_data->opmode = NL80211_IFTYPE_AP;
iter_data->opmode = avf->opmode;
}
-static void ath_do_set_opmode(struct ath5k_softc *sc)
-{
- struct ath5k_hw *ah = sc->ah;
- ath5k_hw_set_opmode(ah, sc->opmode);
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
- sc->opmode, ath_opmode_to_string(sc->opmode));
-}
-
-void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
- struct ieee80211_vif *vif)
+void
+ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
+ struct ieee80211_vif *vif)
{
struct ath_common *common = ath5k_hw_common(sc->ah);
struct ath_vif_iter_data iter_data;
/* Nothing active, default to station mode */
sc->opmode = NL80211_IFTYPE_STATION;
- ath_do_set_opmode(sc);
+ ath5k_hw_set_opmode(sc->ah, sc->opmode);
+ ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
+ sc->opmode, ath_opmode_to_string(sc->opmode));
if (iter_data.need_set_hw_addr && iter_data.found_active)
ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac);
ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
}
-static void
+void
ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif)
{
struct ath5k_hw *ah = sc->ah;
return NULL;
}
- *skb_addr = pci_map_single(sc->pdev,
+ *skb_addr = dma_map_single(sc->dev,
skb->data, common->rx_bufsize,
- PCI_DMA_FROMDEVICE);
- if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+ DMA_FROM_DEVICE);
+
+ if (unlikely(dma_mapping_error(sc->dev, *skb_addr))) {
ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
dev_kfree_skb(skb);
return NULL;
flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
/* XXX endianness */
- bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
rate = ieee80211_get_tx_rate(sc->hw, info);
if (!rate) {
return 0;
err_unmap:
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
return ret;
}
\*******************/
static int
-ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_alloc(struct ath5k_softc *sc)
{
struct ath5k_desc *ds;
struct ath5k_buf *bf;
/* allocate descriptors */
sc->desc_len = sizeof(struct ath5k_desc) *
(ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
- sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
+
+ sc->desc = dma_alloc_coherent(sc->dev, sc->desc_len,
+ &sc->desc_daddr, GFP_KERNEL);
if (sc->desc == NULL) {
ATH5K_ERR(sc, "can't allocate descriptors\n");
ret = -ENOMEM;
return 0;
err_free:
- pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+ dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
err:
sc->desc = NULL;
return ret;
}
+void
+ath5k_txbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(sc->dev, bf->skbaddr, bf->skb->len,
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
+void
+ath5k_rxbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+ struct ath5k_hw *ah = sc->ah;
+ struct ath_common *common = ath5k_hw_common(ah);
+
+ BUG_ON(!bf);
+ if (!bf->skb)
+ return;
+ dma_unmap_single(sc->dev, bf->skbaddr, common->rx_bufsize,
+ DMA_FROM_DEVICE);
+ dev_kfree_skb_any(bf->skb);
+ bf->skb = NULL;
+ bf->skbaddr = 0;
+ bf->desc->ds_data = 0;
+}
+
static void
-ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_free(struct ath5k_softc *sc)
{
struct ath5k_buf *bf;
ath5k_txbuf_free_skb(sc, bf);
/* Free memory associated with all descriptors */
- pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+ dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
sc->desc = NULL;
sc->desc_daddr = 0;
return ret;
}
+/**
+ * ath5k_drain_tx_buffs - Empty tx buffers
+ *
+ * @sc The &struct ath5k_softc
+ *
+ * Empty tx buffers from all queues in preparation
+ * of a reset or during shutdown.
+ *
+ * NB: this assumes output has been stopped and
+ * we do not need to block ath5k_tx_tasklet
+ */
static void
-ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+ath5k_drain_tx_buffs(struct ath5k_softc *sc)
{
+ struct ath5k_txq *txq;
struct ath5k_buf *bf, *bf0;
+ int i;
- /*
- * NB: this assumes output has been stopped and
- * we do not need to block ath5k_tx_tasklet
- */
- spin_lock_bh(&txq->lock);
- list_for_each_entry_safe(bf, bf0, &txq->q, list) {
- ath5k_debug_printtxbuf(sc, bf);
-
- ath5k_txbuf_free_skb(sc, bf);
-
- spin_lock_bh(&sc->txbuflock);
- list_move_tail(&bf->list, &sc->txbuf);
- sc->txbuf_len++;
- txq->txq_len--;
- spin_unlock_bh(&sc->txbuflock);
- }
- txq->link = NULL;
- txq->txq_poll_mark = false;
- spin_unlock_bh(&txq->lock);
-}
+ for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
+ if (sc->txqs[i].setup) {
+ txq = &sc->txqs[i];
+ spin_lock_bh(&txq->lock);
+ list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+ ath5k_debug_printtxbuf(sc, bf);
-/*
- * Drain the transmit queues and reclaim resources.
- */
-static void
-ath5k_txq_cleanup(struct ath5k_softc *sc)
-{
- struct ath5k_hw *ah = sc->ah;
- unsigned int i;
+ ath5k_txbuf_free_skb(sc, bf);
- /* XXX return value */
- if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
- /* don't touch the hardware if marked invalid */
- ath5k_hw_stop_tx_dma(ah, sc->bhalq);
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
- ath5k_hw_get_txdp(ah, sc->bhalq));
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
- if (sc->txqs[i].setup) {
- ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
- ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
- "link %p\n",
- sc->txqs[i].qnum,
- ath5k_hw_get_txdp(ah,
- sc->txqs[i].qnum),
- sc->txqs[i].link);
+ spin_lock_bh(&sc->txbuflock);
+ list_move_tail(&bf->list, &sc->txbuf);
+ sc->txbuf_len++;
+ txq->txq_len--;
+ spin_unlock_bh(&sc->txbuflock);
}
+ txq->link = NULL;
+ txq->txq_poll_mark = false;
+ spin_unlock_bh(&txq->lock);
+ }
}
-
- for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
- if (sc->txqs[i].setup)
- ath5k_txq_drainq(sc, &sc->txqs[i]);
}
static void
}
/*
- * Disable the receive h/w in preparation for a reset.
+ * Disable the receive logic on PCU (DRU)
+ * In preparation for a shutdown.
+ *
+ * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
+ * does.
*/
static void
ath5k_rx_stop(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
- ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
- ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
+ ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
ath5k_debug_printrxbuffs(sc, ah);
}
memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
return;
- ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg,
- rssi);
+ ewma_add(&ah->ah_beacon_rssi_avg, rssi);
/* in IBSS mode we should keep RSSI statistics per neighbour */
/* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
if (!next_skb)
goto next;
- pci_unmap_single(sc->pdev, bf->skbaddr,
+ dma_unmap_single(sc->dev, bf->skbaddr,
common->rx_bufsize,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
skb_put(skb, rs.rs_datalen);
* TX Handling *
\*************/
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
- struct ath5k_txq *txq)
+int
+ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+ struct ath5k_txq *txq)
{
struct ath5k_softc *sc = hw->priv;
struct ath5k_buf *bf;
skb = bf->skb;
bf->skb = NULL;
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
- PCI_DMA_TODEVICE);
+
+ dma_unmap_single(sc->dev, bf->skbaddr, skb->len,
+ DMA_TO_DEVICE);
ath5k_tx_frame_completed(sc, skb, &ts);
}
u32 flags;
const int padsize = 0;
- bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
"skbaddr %llx\n", skb, skb->data, skb->len,
(unsigned long long)bf->skbaddr);
- if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
+
+ if (dma_mapping_error(sc->dev, bf->skbaddr)) {
ATH5K_ERR(sc, "beacon DMA mapping failed\n");
return -EIO;
}
return 0;
err_unmap:
- pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+ dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
return ret;
}
*
* Called with the beacon lock.
*/
-static int
+int
ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
{
int ret;
* This should never fail since we check above that no frames
* are still pending on the queue.
*/
- if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
+ if (unlikely(ath5k_hw_stop_beacon_queue(ah, sc->bhalq))) {
ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
/* NB: hw still stops DMA, so proceed */
}
* when we otherwise know we have to update the timers, but we keep it in this
* function to have it all together in one place.
*/
-static void
+void
ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
{
struct ath5k_hw *ah = sc->ah;
* In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
* interrupts to detect TSF updates only.
*/
-static void
+void
ath5k_beacon_config(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
} else
ath5k_beacon_update_timers(sc, -1);
} else {
- ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
+ ath5k_hw_stop_beacon_queue(sc->ah, sc->bhalq);
}
ath5k_hw_set_imr(ah, sc->imask);
* AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
}
-static irqreturn_t
+irqreturn_t
ath5k_intr(int irq, void *dev_id)
{
struct ath5k_softc *sc = dev_id;
unsigned int counter = 1000;
if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
- !ath5k_hw_is_intr_pending(ah)))
+ ((ath5k_get_bus_type(ah) != ATH_AHB) &&
+ !ath5k_hw_is_intr_pending(ah))))
return IRQ_NONE;
do {
tasklet_schedule(&sc->rf_kill.toggleq);
}
+
+ if (ath5k_get_bus_type(ah) == ATH_AHB)
+ break;
+
} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
if (unlikely(!counter))
int i;
bool needreset = false;
+ mutex_lock(&sc->lock);
+
for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
if (sc->txqs[i].setup) {
txq = &sc->txqs[i];
if (needreset) {
ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
"TX queues stuck, resetting\n");
- ath5k_reset(sc, sc->curchan);
+ ath5k_reset(sc, NULL, true);
}
+ mutex_unlock(&sc->lock);
+
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
msecs_to_jiffies(ATH5K_TX_COMPLETE_POLL_INT));
}
* Initialization routines *
\*************************/
+int
+ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
+{
+ struct ieee80211_hw *hw = sc->hw;
+ struct ath_common *common;
+ int ret;
+ int csz;
+
+ /* Initialize driver private data */
+ SET_IEEE80211_DEV(hw, sc->dev);
+ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+ IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+ IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+
+ hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC) |
+ BIT(NL80211_IFTYPE_MESH_POINT);
+
+ /* both antennas can be configured as RX or TX */
+ hw->wiphy->available_antennas_tx = 0x3;
+ hw->wiphy->available_antennas_rx = 0x3;
+
+ hw->extra_tx_headroom = 2;
+ hw->channel_change_time = 5000;
+
+ /*
+ * Mark the device as detached to avoid processing
+ * interrupts until setup is complete.
+ */
+ __set_bit(ATH_STAT_INVALID, sc->status);
+
+ sc->opmode = NL80211_IFTYPE_STATION;
+ sc->bintval = 1000;
+ mutex_init(&sc->lock);
+ spin_lock_init(&sc->rxbuflock);
+ spin_lock_init(&sc->txbuflock);
+ spin_lock_init(&sc->block);
+
+
+ /* Setup interrupt handler */
+ ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+ if (ret) {
+ ATH5K_ERR(sc, "request_irq failed\n");
+ goto err;
+ }
+
+ /* If we passed the test, malloc an ath5k_hw struct */
+ sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+ if (!sc->ah) {
+ ret = -ENOMEM;
+ ATH5K_ERR(sc, "out of memory\n");
+ goto err_irq;
+ }
+
+ sc->ah->ah_sc = sc;
+ sc->ah->ah_iobase = sc->iobase;
+ common = ath5k_hw_common(sc->ah);
+ common->ops = &ath5k_common_ops;
+ common->bus_ops = bus_ops;
+ common->ah = sc->ah;
+ common->hw = hw;
+ common->priv = sc;
+
+ /*
+ * Cache line size is used to size and align various
+ * structures used to communicate with the hardware.
+ */
+ ath5k_read_cachesize(common, &csz);
+ common->cachelsz = csz << 2; /* convert to bytes */
+
+ spin_lock_init(&common->cc_lock);
+
+ /* Initialize device */
+ ret = ath5k_hw_init(sc);
+ if (ret)
+ goto err_free_ah;
+
+ /* set up multi-rate retry capabilities */
+ if (sc->ah->ah_version == AR5K_AR5212) {
+ hw->max_rates = 4;
+ hw->max_rate_tries = 11;
+ }
+
+ hw->vif_data_size = sizeof(struct ath5k_vif);
+
+ /* Finish private driver data initialization */
+ ret = ath5k_init(hw);
+ if (ret)
+ goto err_ah;
+
+ ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
+ sc->ah->ah_mac_srev,
+ sc->ah->ah_phy_revision);
+
+ if (!sc->ah->ah_single_chip) {
+ /* Single chip radio (!RF5111) */
+ if (sc->ah->ah_radio_5ghz_revision &&
+ !sc->ah->ah_radio_2ghz_revision) {
+ /* No 5GHz support -> report 2GHz radio */
+ if (!test_bit(AR5K_MODE_11A,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* No 2GHz support (5110 and some
+ * 5Ghz only cards) -> report 5Ghz radio */
+ } else if (!test_bit(AR5K_MODE_11B,
+ sc->ah->ah_capabilities.cap_mode)) {
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ /* Multiband radio */
+ } else {
+ ATH5K_INFO(sc, "RF%s multiband radio found"
+ " (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ }
+ }
+ /* Multi chip radio (RF5111 - RF2111) ->
+ * report both 2GHz/5GHz radios */
+ else if (sc->ah->ah_radio_5ghz_revision &&
+ sc->ah->ah_radio_2ghz_revision){
+ ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_5ghz_revision),
+ sc->ah->ah_radio_5ghz_revision);
+ ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+ ath5k_chip_name(AR5K_VERSION_RAD,
+ sc->ah->ah_radio_2ghz_revision),
+ sc->ah->ah_radio_2ghz_revision);
+ }
+ }
+
+ ath5k_debug_init_device(sc);
+
+ /* ready to process interrupts */
+ __clear_bit(ATH_STAT_INVALID, sc->status);
+
+ return 0;
+err_ah:
+ ath5k_hw_deinit(sc->ah);
+err_free_ah:
+ kfree(sc->ah);
+err_irq:
+ free_irq(sc->irq, sc);
+err:
+ return ret;
+}
+
static int
ath5k_stop_locked(struct ath5k_softc *sc)
{
if (!test_bit(ATH_STAT_INVALID, sc->status)) {
ath5k_led_off(sc);
ath5k_hw_set_imr(ah, 0);
- synchronize_irq(sc->pdev->irq);
- }
- ath5k_txq_cleanup(sc);
- if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+ synchronize_irq(sc->irq);
ath5k_rx_stop(sc);
+ ath5k_hw_dma_stop(ah);
+ ath5k_drain_tx_buffs(sc);
ath5k_hw_phy_disable(ah);
}
return 0;
}
-static int
-ath5k_init(struct ath5k_softc *sc)
+int
+ath5k_init_hw(struct ath5k_softc *sc)
{
struct ath5k_hw *ah = sc->ah;
struct ath_common *common = ath5k_hw_common(ah);
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
- ret = ath5k_reset(sc, NULL);
+ ret = ath5k_reset(sc, NULL, false);
if (ret)
goto done;
for (i = 0; i < common->keymax; i++)
ath_hw_keyreset(common, (u16) i);
- ath5k_hw_set_ack_bitrate_high(ah, true);
+ /* Use higher rates for acks instead of base
+ * rate */
+ ah->ah_ack_bitrate_high = true;
for (i = 0; i < ARRAY_SIZE(sc->bslot); i++)
sc->bslot[i] = NULL;
* if another thread does a system call and the thread doing the
* stop is preempted).
*/
-static int
+int
ath5k_stop_hw(struct ath5k_softc *sc)
{
int ret;
* This should be called with sc->lock.
*/
static int
-ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+ bool skip_pcu)
{
struct ath5k_hw *ah = sc->ah;
- int ret;
+ struct ath_common *common = ath5k_hw_common(ah);
+ int ret, ani_mode;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
ath5k_hw_set_imr(ah, 0);
- synchronize_irq(sc->pdev->irq);
+ synchronize_irq(sc->irq);
stop_tasklets(sc);
- if (chan) {
- ath5k_txq_cleanup(sc);
- ath5k_rx_stop(sc);
+ /* Save ani mode and disable ANI durring
+ * reset. If we don't we might get false
+ * PHY error interrupts. */
+ ani_mode = ah->ah_sc->ani_state.ani_mode;
+ ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
+ /* We are going to empty hw queues
+ * so we should also free any remaining
+ * tx buffers */
+ ath5k_drain_tx_buffs(sc);
+ if (chan) {
sc->curchan = chan;
sc->curband = &sc->sbands[chan->band];
}
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+ skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
goto err;
}
- ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode);
+ ath5k_ani_init(ah, ani_mode);
ah->ah_cal_next_full = jiffies;
ah->ah_cal_next_ani = jiffies;
ah->ah_cal_next_nf = jiffies;
+ ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
+
+ /* clear survey data and cycle counters */
+ memset(&sc->survey, 0, sizeof(sc->survey));
+ spin_lock_bh(&common->cc_lock);
+ ath_hw_cycle_counters_update(common);
+ memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+ memset(&common->cc_ani, 0, sizeof(common->cc_ani));
+ spin_unlock_bh(&common->cc_lock);
/*
* Change channels and update the h/w rate map if we're switching;
reset_work);
mutex_lock(&sc->lock);
- ath5k_reset(sc, sc->curchan);
+ ath5k_reset(sc, NULL, true);
mutex_unlock(&sc->lock);
}
static int
-ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+ath5k_init(struct ieee80211_hw *hw)
{
+
struct ath5k_softc *sc = hw->priv;
struct ath5k_hw *ah = sc->ah;
struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
u8 mac[ETH_ALEN] = {};
int ret;
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
/*
* Check if the MAC has multi-rate retry support.
/*
* Allocate tx+rx descriptors and populate the lists.
*/
- ret = ath5k_desc_alloc(sc, pdev);
+ ret = ath5k_desc_alloc(sc);
if (ret) {
ATH5K_ERR(sc, "can't allocate descriptors\n");
goto err;
goto err_bhal;
}
- /* This order matches mac80211's queue priority, so we can
- * directly use the mac80211 queue number without any mapping */
- txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
- if (IS_ERR(txq)) {
- ATH5K_ERR(sc, "can't setup xmit queue\n");
- ret = PTR_ERR(txq);
- goto err_queues;
- }
- txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
- if (IS_ERR(txq)) {
- ATH5K_ERR(sc, "can't setup xmit queue\n");
- ret = PTR_ERR(txq);
- goto err_queues;
- }
- txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
- if (IS_ERR(txq)) {
- ATH5K_ERR(sc, "can't setup xmit queue\n");
- ret = PTR_ERR(txq);
- goto err_queues;
- }
- txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
- if (IS_ERR(txq)) {
- ATH5K_ERR(sc, "can't setup xmit queue\n");
- ret = PTR_ERR(txq);
- goto err_queues;
+ /* 5211 and 5212 usually support 10 queues but we better rely on the
+ * capability information */
+ if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) {
+ /* This order matches mac80211's queue priority, so we can
+ * directly use the mac80211 queue number without any mapping */
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 4;
+ } else {
+ /* older hardware (5210) can only support one data queue */
+ txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+ if (IS_ERR(txq)) {
+ ATH5K_ERR(sc, "can't setup xmit queue\n");
+ ret = PTR_ERR(txq);
+ goto err_queues;
+ }
+ hw->queues = 1;
}
- hw->queues = 4;
tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
ret = ath5k_eeprom_read_mac(ah, mac);
if (ret) {
- ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
- sc->pdev->device);
+ ATH5K_ERR(sc, "unable to read address from EEPROM\n");
goto err_queues;
}
err_bhal:
ath5k_hw_release_tx_queue(ah, sc->bhalq);
err_desc:
- ath5k_desc_free(sc, pdev);
+ ath5k_desc_free(sc);
err:
return ret;
}
-static void
-ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+void
+ath5k_deinit_softc(struct ath5k_softc *sc)
{
- struct ath5k_softc *sc = hw->priv;
+ struct ieee80211_hw *hw = sc->hw;
/*
* NB: the order of these is important:
* XXX: ??? detach ath5k_hw ???
* Other than that, it's straightforward...
*/
+ ath5k_debug_finish_device(sc);
ieee80211_unregister_hw(hw);
- ath5k_desc_free(sc, pdev);
+ ath5k_desc_free(sc);
ath5k_txq_release(sc);
ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
ath5k_unregister_leds(sc);
* returns because we'll get called back to reclaim node
* state and potentially want to use them.
*/
+ ath5k_hw_deinit(sc->ah);
+ free_irq(sc->irq, sc);
}
-/********************\
-* Mac80211 functions *
-\********************/
-
-static int
-ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct ath5k_softc *sc = hw->priv;
- u16 qnum = skb_get_queue_mapping(skb);
-
- if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
- dev_kfree_skb_any(skb);
- return 0;
- }
-
- return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
-}
-
-static int ath5k_start(struct ieee80211_hw *hw)
-{
- return ath5k_init(hw->priv);
-}
-
-static void ath5k_stop(struct ieee80211_hw *hw)
-{
- ath5k_stop_hw(hw->priv);
-}
-
-static int ath5k_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct ath5k_softc *sc = hw->priv;
- int ret;
- struct ath5k_vif *avf = (void *)vif->drv_priv;
-
- mutex_lock(&sc->lock);
-
- if ((vif->type == NL80211_IFTYPE_AP ||
- vif->type == NL80211_IFTYPE_ADHOC)
- && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) {
- ret = -ELNRNG;
- goto end;
- }
-
- /* Don't allow other interfaces if one ad-hoc is configured.
- * TODO: Fix the problems with ad-hoc and multiple other interfaces.
- * We would need to operate the HW in ad-hoc mode to allow TSF updates
- * for the IBSS, but this breaks with additional AP or STA interfaces
- * at the moment. */
- if (sc->num_adhoc_vifs ||
- (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
- ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n");
- ret = -ELNRNG;
- goto end;
- }
-
- switch (vif->type) {
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- avf->opmode = vif->type;
- break;
- default:
- ret = -EOPNOTSUPP;
- goto end;
- }
-
- sc->nvifs++;
- ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
-
- /* Assign the vap/adhoc to a beacon xmit slot. */
- if ((avf->opmode == NL80211_IFTYPE_AP) ||
- (avf->opmode == NL80211_IFTYPE_ADHOC) ||
- (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
- int slot;
-
- WARN_ON(list_empty(&sc->bcbuf));
- avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf,
- list);
- list_del(&avf->bbuf->list);
-
- avf->bslot = 0;
- for (slot = 0; slot < ATH_BCBUF; slot++) {
- if (!sc->bslot[slot]) {
- avf->bslot = slot;
- break;
- }
- }
- BUG_ON(sc->bslot[avf->bslot] != NULL);
- sc->bslot[avf->bslot] = vif;
- if (avf->opmode == NL80211_IFTYPE_AP)
- sc->num_ap_vifs++;
- else if (avf->opmode == NL80211_IFTYPE_ADHOC)
- sc->num_adhoc_vifs++;
- }
-
- /* Any MAC address is fine, all others are included through the
- * filter.
- */
- memcpy(&sc->lladdr, vif->addr, ETH_ALEN);
- ath5k_hw_set_lladdr(sc->ah, vif->addr);
-
- memcpy(&avf->lladdr, vif->addr, ETH_ALEN);
-
- ath5k_mode_setup(sc, vif);
-
- ret = 0;
-end:
- mutex_unlock(&sc->lock);
- return ret;
-}
-
-static void
-ath5k_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_vif *avf = (void *)vif->drv_priv;
- unsigned int i;
-
- mutex_lock(&sc->lock);
- sc->nvifs--;
-
- if (avf->bbuf) {
- ath5k_txbuf_free_skb(sc, avf->bbuf);
- list_add_tail(&avf->bbuf->list, &sc->bcbuf);
- for (i = 0; i < ATH_BCBUF; i++) {
- if (sc->bslot[i] == vif) {
- sc->bslot[i] = NULL;
- break;
- }
- }
- avf->bbuf = NULL;
- }
- if (avf->opmode == NL80211_IFTYPE_AP)
- sc->num_ap_vifs--;
- else if (avf->opmode == NL80211_IFTYPE_ADHOC)
- sc->num_adhoc_vifs--;
-
- ath5k_update_bssid_mask_and_opmode(sc, NULL);
- mutex_unlock(&sc->lock);
-}
-
-/*
- * TODO: Phy disable/diversity etc
- */
-static int
-ath5k_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- struct ieee80211_conf *conf = &hw->conf;
- int ret = 0;
-
- mutex_lock(&sc->lock);
-
- if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
- ret = ath5k_chan_set(sc, conf->channel);
- if (ret < 0)
- goto unlock;
- }
-
- if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
- (sc->power_level != conf->power_level)) {
- sc->power_level = conf->power_level;
-
- /* Half dB steps */
- ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
- }
-
- /* TODO:
- * 1) Move this on config_interface and handle each case
- * separately eg. when we have only one STA vif, use
- * AR5K_ANTMODE_SINGLE_AP
- *
- * 2) Allow the user to change antenna mode eg. when only
- * one antenna is present
- *
- * 3) Allow the user to set default/tx antenna when possible
- *
- * 4) Default mode should handle 90% of the cases, together
- * with fixed a/b and single AP modes we should be able to
- * handle 99%. Sectored modes are extreme cases and i still
- * haven't found a usage for them. If we decide to support them,
- * then we must allow the user to set how many tx antennas we
- * have available
- */
- ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
-
-unlock:
- mutex_unlock(&sc->lock);
- return ret;
-}
-
-static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
- struct netdev_hw_addr_list *mc_list)
-{
- u32 mfilt[2], val;
- u8 pos;
- struct netdev_hw_addr *ha;
-
- mfilt[0] = 0;
- mfilt[1] = 1;
-
- netdev_hw_addr_list_for_each(ha, mc_list) {
- /* calculate XOR of eight 6-bit values */
- val = get_unaligned_le32(ha->addr + 0);
- pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
- val = get_unaligned_le32(ha->addr + 3);
- pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
- pos &= 0x3f;
- mfilt[pos / 32] |= (1 << (pos % 32));
- /* XXX: we might be able to just do this instead,
- * but not sure, needs testing, if we do use this we'd
- * neet to inform below to not reset the mcast */
- /* ath5k_hw_set_mcast_filterindex(ah,
- * ha->addr[5]); */
- }
-
- return ((u64)(mfilt[1]) << 32) | mfilt[0];
-}
-
-static bool ath_any_vif_assoc(struct ath5k_softc *sc)
+bool
+ath_any_vif_assoc(struct ath5k_softc *sc)
{
struct ath_vif_iter_data iter_data;
iter_data.hw_macaddr = NULL;
return iter_data.any_assoc;
}
-#define SUPPORTED_FIF_FLAGS \
- FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
- FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
- FIF_BCN_PRBRESP_PROMISC
-/*
- * o always accept unicast, broadcast, and multicast traffic
- * o multicast traffic for all BSSIDs will be enabled if mac80211
- * says it should be
- * o maintain current state of phy ofdm or phy cck error reception.
- * If the hardware detects any of these type of errors then
- * ath5k_hw_get_rx_filter() will pass to us the respective
- * hardware filters to be able to receive these type of frames.
- * o probe request frames are accepted only when operating in
- * hostap, adhoc, or monitor modes
- * o enable promiscuous mode according to the interface state
- * o accept beacons:
- * - when operating in adhoc mode so the 802.11 layer creates
- * node table entries for peers,
- * - when operating in station mode for collecting rssi data when
- * the station is otherwise quiet, or
- * - when scanning
- */
-static void ath5k_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *new_flags,
- u64 multicast)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- u32 mfilt[2], rfilt;
-
- mutex_lock(&sc->lock);
-
- mfilt[0] = multicast;
- mfilt[1] = multicast >> 32;
-
- /* Only deal with supported flags */
- changed_flags &= SUPPORTED_FIF_FLAGS;
- *new_flags &= SUPPORTED_FIF_FLAGS;
-
- /* If HW detects any phy or radar errors, leave those filters on.
- * Also, always enable Unicast, Broadcasts and Multicast
- * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
- rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
- (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
- AR5K_RX_FILTER_MCAST);
-
- if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
- if (*new_flags & FIF_PROMISC_IN_BSS) {
- __set_bit(ATH_STAT_PROMISC, sc->status);
- } else {
- __clear_bit(ATH_STAT_PROMISC, sc->status);
- }
- }
-
- if (test_bit(ATH_STAT_PROMISC, sc->status))
- rfilt |= AR5K_RX_FILTER_PROM;
-
- /* Note, AR5K_RX_FILTER_MCAST is already enabled */
- if (*new_flags & FIF_ALLMULTI) {
- mfilt[0] = ~0;
- mfilt[1] = ~0;
- }
-
- /* This is the best we can do */
- if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
- rfilt |= AR5K_RX_FILTER_PHYERR;
-
- /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
- * and probes for any BSSID */
- if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1))
- rfilt |= AR5K_RX_FILTER_BEACON;
-
- /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
- * set we should only pass on control frames for this
- * station. This needs testing. I believe right now this
- * enables *all* control frames, which is OK.. but
- * but we should see if we can improve on granularity */
- if (*new_flags & FIF_CONTROL)
- rfilt |= AR5K_RX_FILTER_CONTROL;
-
- /* Additional settings per mode -- this is per ath5k */
-
- /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
-
- switch (sc->opmode) {
- case NL80211_IFTYPE_MESH_POINT:
- rfilt |= AR5K_RX_FILTER_CONTROL |
- AR5K_RX_FILTER_BEACON |
- AR5K_RX_FILTER_PROBEREQ |
- AR5K_RX_FILTER_PROM;
- break;
- case NL80211_IFTYPE_AP:
- case NL80211_IFTYPE_ADHOC:
- rfilt |= AR5K_RX_FILTER_PROBEREQ |
- AR5K_RX_FILTER_BEACON;
- break;
- case NL80211_IFTYPE_STATION:
- if (sc->assoc)
- rfilt |= AR5K_RX_FILTER_BEACON;
- default:
- break;
- }
-
- /* Set filters */
- ath5k_hw_set_rx_filter(ah, rfilt);
-
- /* Set multicast bits */
- ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
- /* Set the cached hw filter flags, this will later actually
- * be set in HW */
- sc->filter_flags = rfilt;
-
- mutex_unlock(&sc->lock);
-}
-
-static int
-ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- struct ath_common *common = ath5k_hw_common(ah);
- int ret = 0;
-
- if (modparam_nohwcrypt)
- return -EOPNOTSUPP;
-
- switch (key->cipher) {
- case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- case WLAN_CIPHER_SUITE_TKIP:
- break;
- case WLAN_CIPHER_SUITE_CCMP:
- if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
- break;
- return -EOPNOTSUPP;
- default:
- WARN_ON(1);
- return -EINVAL;
- }
-
- mutex_lock(&sc->lock);
-
- switch (cmd) {
- case SET_KEY:
- ret = ath_key_config(common, vif, sta, key);
- if (ret >= 0) {
- key->hw_key_idx = ret;
- /* push IV and Michael MIC generation to stack */
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
- key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
- if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
- key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
- ret = 0;
- }
- break;
- case DISABLE_KEY:
- ath_key_delete(common, key);
- break;
- default:
- ret = -EINVAL;
- }
-
- mmiowb();
- mutex_unlock(&sc->lock);
- return ret;
-}
-
-static int
-ath5k_get_stats(struct ieee80211_hw *hw,
- struct ieee80211_low_level_stats *stats)
-{
- struct ath5k_softc *sc = hw->priv;
-
- /* Force update */
- ath5k_hw_update_mib_counters(sc->ah);
-
- stats->dot11ACKFailureCount = sc->stats.ack_fail;
- stats->dot11RTSFailureCount = sc->stats.rts_fail;
- stats->dot11RTSSuccessCount = sc->stats.rts_ok;
- stats->dot11FCSErrorCount = sc->stats.fcs_error;
-
- return 0;
-}
-
-static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
- struct survey_info *survey)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ieee80211_conf *conf = &hw->conf;
-
- if (idx != 0)
- return -ENOENT;
-
- survey->channel = conf->channel;
- survey->filled = SURVEY_INFO_NOISE_DBM;
- survey->noise = sc->ah->ah_noise_floor;
-
- return 0;
-}
-
-static u64
-ath5k_get_tsf(struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
-
- return ath5k_hw_get_tsf64(sc->ah);
-}
-
-static void
-ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
-{
- struct ath5k_softc *sc = hw->priv;
-
- ath5k_hw_set_tsf64(sc->ah, tsf);
-}
-
-static void
-ath5k_reset_tsf(struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
-
- /*
- * in IBSS mode we need to update the beacon timers too.
- * this will also reset the TSF if we call it with 0
- */
- if (sc->opmode == NL80211_IFTYPE_ADHOC)
- ath5k_beacon_update_timers(sc, 0);
- else
- ath5k_hw_reset_tsf(sc->ah);
-}
-
-static void
+void
set_beacon_filter(struct ieee80211_hw *hw, bool enable)
{
struct ath5k_softc *sc = hw->priv;
ath5k_hw_set_rx_filter(ah, rfilt);
sc->filter_flags = rfilt;
}
-
-static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *bss_conf,
- u32 changes)
-{
- struct ath5k_vif *avf = (void *)vif->drv_priv;
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- struct ath_common *common = ath5k_hw_common(ah);
- unsigned long flags;
-
- mutex_lock(&sc->lock);
-
- if (changes & BSS_CHANGED_BSSID) {
- /* Cache for later use during resets */
- memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
- common->curaid = 0;
- ath5k_hw_set_bssid(ah);
- mmiowb();
- }
-
- if (changes & BSS_CHANGED_BEACON_INT)
- sc->bintval = bss_conf->beacon_int;
-
- if (changes & BSS_CHANGED_ASSOC) {
- avf->assoc = bss_conf->assoc;
- if (bss_conf->assoc)
- sc->assoc = bss_conf->assoc;
- else
- sc->assoc = ath_any_vif_assoc(sc);
-
- if (sc->opmode == NL80211_IFTYPE_STATION)
- set_beacon_filter(hw, sc->assoc);
- ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
- AR5K_LED_ASSOC : AR5K_LED_INIT);
- if (bss_conf->assoc) {
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
- "Bss Info ASSOC %d, bssid: %pM\n",
- bss_conf->aid, common->curbssid);
- common->curaid = bss_conf->aid;
- ath5k_hw_set_bssid(ah);
- /* Once ANI is available you would start it here */
- }
- }
-
- if (changes & BSS_CHANGED_BEACON) {
- spin_lock_irqsave(&sc->block, flags);
- ath5k_beacon_update(hw, vif);
- spin_unlock_irqrestore(&sc->block, flags);
- }
-
- if (changes & BSS_CHANGED_BEACON_ENABLED)
- sc->enable_beacon = bss_conf->enable_beacon;
-
- if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
- BSS_CHANGED_BEACON_INT))
- ath5k_beacon_config(sc);
-
- mutex_unlock(&sc->lock);
-}
-
-static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
- if (!sc->assoc)
- ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
-}
-
-static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
-{
- struct ath5k_softc *sc = hw->priv;
- ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
- AR5K_LED_ASSOC : AR5K_LED_INIT);
-}
-
-/**
- * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
- *
- * @hw: struct ieee80211_hw pointer
- * @coverage_class: IEEE 802.11 coverage class number
- *
- * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
- * coverage class. The values are persistent, they are restored after device
- * reset.
- */
-static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
-{
- struct ath5k_softc *sc = hw->priv;
-
- mutex_lock(&sc->lock);
- ath5k_hw_set_coverage_class(sc->ah, coverage_class);
- mutex_unlock(&sc->lock);
-}
-
-static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
- const struct ieee80211_tx_queue_params *params)
-{
- struct ath5k_softc *sc = hw->priv;
- struct ath5k_hw *ah = sc->ah;
- struct ath5k_txq_info qi;
- int ret = 0;
-
- if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
- return 0;
-
- mutex_lock(&sc->lock);
-
- ath5k_hw_get_tx_queueprops(ah, queue, &qi);
-
- qi.tqi_aifs = params->aifs;
- qi.tqi_cw_min = params->cw_min;
- qi.tqi_cw_max = params->cw_max;
- qi.tqi_burst_time = params->txop;
-
- ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
- "Configure tx [queue %d], "
- "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
- queue, params->aifs, params->cw_min,
- params->cw_max, params->txop);
-
- if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
- ATH5K_ERR(sc,
- "Unable to update hardware queue %u!\n", queue);
- ret = -EIO;
- } else
- ath5k_hw_reset_tx_queue(ah, queue);
-
- mutex_unlock(&sc->lock);
-
- return ret;
-}
-
-static const struct ieee80211_ops ath5k_hw_ops = {
- .tx = ath5k_tx,
- .start = ath5k_start,
- .stop = ath5k_stop,
- .add_interface = ath5k_add_interface,
- .remove_interface = ath5k_remove_interface,
- .config = ath5k_config,
- .prepare_multicast = ath5k_prepare_multicast,
- .configure_filter = ath5k_configure_filter,
- .set_key = ath5k_set_key,
- .get_stats = ath5k_get_stats,
- .get_survey = ath5k_get_survey,
- .conf_tx = ath5k_conf_tx,
- .get_tsf = ath5k_get_tsf,
- .set_tsf = ath5k_set_tsf,
- .reset_tsf = ath5k_reset_tsf,
- .bss_info_changed = ath5k_bss_info_changed,
- .sw_scan_start = ath5k_sw_scan_start,
- .sw_scan_complete = ath5k_sw_scan_complete,
- .set_coverage_class = ath5k_set_coverage_class,
-};
-
-/********************\
-* PCI Initialization *
-\********************/
-
-static int __devinit
-ath5k_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- void __iomem *mem;
- struct ath5k_softc *sc;
- struct ath_common *common;
- struct ieee80211_hw *hw;
- int ret;
- u8 csz;
-
- /*
- * L0s needs to be disabled on all ath5k cards.
- *
- * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
- * by default in the future in 2.6.36) this will also mean both L1 and
- * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
- * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
- * though but cannot currently undue the effect of a blacklist, for
- * details you can read pcie_aspm_sanity_check() and see how it adjusts
- * the device link capability.
- *
- * It may be possible in the future to implement some PCI API to allow
- * drivers to override blacklists for pre 1.1 PCIe but for now it is
- * best to accept that both L0s and L1 will be disabled completely for
- * distributions shipping with CONFIG_PCIEASPM rather than having this
- * issue present. Motivation for adding this new API will be to help
- * with power consumption for some of these devices.
- */
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
-
- ret = pci_enable_device(pdev);
- if (ret) {
- dev_err(&pdev->dev, "can't enable device\n");
- goto err;
- }
-
- /* XXX 32-bit addressing only */
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (ret) {
- dev_err(&pdev->dev, "32-bit DMA not available\n");
- goto err_dis;
- }
-
- /*
- * Cache line size is used to size and align various
- * structures used to communicate with the hardware.
- */
- pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
- if (csz == 0) {
- /*
- * Linux 2.4.18 (at least) writes the cache line size
- * register as a 16-bit wide register which is wrong.
- * We must have this setup properly for rx buffer
- * DMA to work so force a reasonable value here if it
- * comes up zero.
- */
- csz = L1_CACHE_BYTES >> 2;
- pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
- }
- /*
- * The default setting of latency timer yields poor results,
- * set it to the value used by other systems. It may be worth
- * tweaking this setting more.
- */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
-
- /* Enable bus mastering */
- pci_set_master(pdev);
-
- /*
- * Disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state.
- */
- pci_write_config_byte(pdev, 0x41, 0);
-
- ret = pci_request_region(pdev, 0, "ath5k");
- if (ret) {
- dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
- goto err_dis;
- }
-
- mem = pci_iomap(pdev, 0, 0);
- if (!mem) {
- dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
- ret = -EIO;
- goto err_reg;
- }
-
- /*
- * Allocate hw (mac80211 main struct)
- * and hw->priv (driver private data)
- */
- hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
- if (hw == NULL) {
- dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
- ret = -ENOMEM;
- goto err_map;
- }
-
- dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
-
- /* Initialize driver private data */
- SET_IEEE80211_DEV(hw, &pdev->dev);
- hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
- IEEE80211_HW_SIGNAL_DBM;
-
- hw->wiphy->interface_modes =
- BIT(NL80211_IFTYPE_AP) |
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC) |
- BIT(NL80211_IFTYPE_MESH_POINT);
-
- hw->extra_tx_headroom = 2;
- hw->channel_change_time = 5000;
- sc = hw->priv;
- sc->hw = hw;
- sc->pdev = pdev;
-
- /*
- * Mark the device as detached to avoid processing
- * interrupts until setup is complete.
- */
- __set_bit(ATH_STAT_INVALID, sc->status);
-
- sc->iobase = mem; /* So we can unmap it on detach */
- sc->opmode = NL80211_IFTYPE_STATION;
- sc->bintval = 1000;
- mutex_init(&sc->lock);
- spin_lock_init(&sc->rxbuflock);
- spin_lock_init(&sc->txbuflock);
- spin_lock_init(&sc->block);
-
- /* Set private data */
- pci_set_drvdata(pdev, sc);
-
- /* Setup interrupt handler */
- ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
- if (ret) {
- ATH5K_ERR(sc, "request_irq failed\n");
- goto err_free;
- }
-
- /* If we passed the test, malloc an ath5k_hw struct */
- sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
- if (!sc->ah) {
- ret = -ENOMEM;
- ATH5K_ERR(sc, "out of memory\n");
- goto err_irq;
- }
-
- sc->ah->ah_sc = sc;
- sc->ah->ah_iobase = sc->iobase;
- common = ath5k_hw_common(sc->ah);
- common->ops = &ath5k_common_ops;
- common->ah = sc->ah;
- common->hw = hw;
- common->cachelsz = csz << 2; /* convert to bytes */
- spin_lock_init(&common->cc_lock);
-
- /* Initialize device */
- ret = ath5k_hw_attach(sc);
- if (ret) {
- goto err_free_ah;
- }
-
- /* set up multi-rate retry capabilities */
- if (sc->ah->ah_version == AR5K_AR5212) {
- hw->max_rates = 4;
- hw->max_rate_tries = 11;
- }
-
- hw->vif_data_size = sizeof(struct ath5k_vif);
-
- /* Finish private driver data initialization */
- ret = ath5k_attach(pdev, hw);
- if (ret)
- goto err_ah;
-
- ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
- sc->ah->ah_mac_srev,
- sc->ah->ah_phy_revision);
-
- if (!sc->ah->ah_single_chip) {
- /* Single chip radio (!RF5111) */
- if (sc->ah->ah_radio_5ghz_revision &&
- !sc->ah->ah_radio_2ghz_revision) {
- /* No 5GHz support -> report 2GHz radio */
- if (!test_bit(AR5K_MODE_11A,
- sc->ah->ah_capabilities.cap_mode)) {
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- /* No 2GHz support (5110 and some
- * 5Ghz only cards) -> report 5Ghz radio */
- } else if (!test_bit(AR5K_MODE_11B,
- sc->ah->ah_capabilities.cap_mode)) {
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- /* Multiband radio */
- } else {
- ATH5K_INFO(sc, "RF%s multiband radio found"
- " (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- }
- }
- /* Multi chip radio (RF5111 - RF2111) ->
- * report both 2GHz/5GHz radios */
- else if (sc->ah->ah_radio_5ghz_revision &&
- sc->ah->ah_radio_2ghz_revision){
- ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_5ghz_revision),
- sc->ah->ah_radio_5ghz_revision);
- ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
- ath5k_chip_name(AR5K_VERSION_RAD,
- sc->ah->ah_radio_2ghz_revision),
- sc->ah->ah_radio_2ghz_revision);
- }
- }
-
- ath5k_debug_init_device(sc);
-
- /* ready to process interrupts */
- __clear_bit(ATH_STAT_INVALID, sc->status);
-
- return 0;
-err_ah:
- ath5k_hw_detach(sc->ah);
-err_free_ah:
- kfree(sc->ah);
-err_irq:
- free_irq(pdev->irq, sc);
-err_free:
- ieee80211_free_hw(hw);
-err_map:
- pci_iounmap(pdev, mem);
-err_reg:
- pci_release_region(pdev, 0);
-err_dis:
- pci_disable_device(pdev);
-err:
- return ret;
-}
-
-static void __devexit
-ath5k_pci_remove(struct pci_dev *pdev)
-{
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
- ath5k_debug_finish_device(sc);
- ath5k_detach(pdev, sc->hw);
- ath5k_hw_detach(sc->ah);
- kfree(sc->ah);
- free_irq(pdev->irq, sc);
- pci_iounmap(pdev, sc->iobase);
- pci_release_region(pdev, 0);
- pci_disable_device(pdev);
- ieee80211_free_hw(sc->hw);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ath5k_pci_suspend(struct device *dev)
-{
- struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
-
- ath5k_led_off(sc);
- return 0;
-}
-
-static int ath5k_pci_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
- /*
- * Suspend/Resume resets the PCI configuration space, so we have to
- * re-disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state
- */
- pci_write_config_byte(pdev, 0x41, 0);
-
- ath5k_led_enable(sc);
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
-#define ATH5K_PM_OPS (&ath5k_pm_ops)
-#else
-#define ATH5K_PM_OPS NULL
-#endif /* CONFIG_PM_SLEEP */
-
-static struct pci_driver ath5k_pci_driver = {
- .name = KBUILD_MODNAME,
- .id_table = ath5k_pci_id_table,
- .probe = ath5k_pci_probe,
- .remove = __devexit_p(ath5k_pci_remove),
- .driver.pm = ATH5K_PM_OPS,
-};
-
-/*
- * Module init/exit functions
- */
-static int __init
-init_ath5k_pci(void)
-{
- int ret;
-
- ret = pci_register_driver(&ath5k_pci_driver);
- if (ret) {
- printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
- return ret;
- }
-
- return 0;
-}
-
-static void __exit
-exit_ath5k_pci(void)
-{
- pci_unregister_driver(&ath5k_pci_driver);
-}
-
-module_init(init_ath5k_pci);
-module_exit(exit_ath5k_pci);
projects / mv-sheeva.git / blobdiff