Staging: Beceem: improve debug printk statements

These are just small changes.  Some grammar and wording changes.  I added
new lines to the end of all the print statements.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c
index b4d22562d0601f7ecfb30f203ee826701c727561..d236b2a054e5d9cd8237be2e9caa7e3649099e25 100644 (file)
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -40,7 +40,7 @@ static void InterfaceAdapterFree(PS_INTERFACE_ADAPTER psIntfAdapter)
         */
        while (psIntfAdapter->psAdapter->DeviceAccess) {
                BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
-                       "Device is being Accessed \n");
+                       "Device is being accessed.\n");
                msleep(100);
        }
        /* Free interrupt URB */
@@ -96,7 +96,8 @@ static void ConfigureEndPointTypesThroughEEPROM(PMINI_ADAPTER Adapter)
 
        /* Program TX EP as interrupt(Alternate Setting) */
        if (rdmalt(Adapter, 0x0F0110F8, (PUINT)&ulReg, 4)) {
-               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "reading of Tx EP is failing");
+               BCM_DEBUG_PRINT(Adapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                       "reading of Tx EP failed\n");
                return;
        }
        ulReg |= 0x6;
@@ -202,7 +203,8 @@ usbbcm_device_probe(struct usb_interface *intf, const struct usb_device_id *id)
        psIntfAdapter->interface = intf;
        usb_set_intfdata(intf, psIntfAdapter);
 
-       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "psIntfAdapter 0x%p", psIntfAdapter);
+       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+               "psIntfAdapter 0x%p\n", psIntfAdapter);
        retval = InterfaceAdapterInit(psIntfAdapter);
        if (retval) {
                /* If the Firmware/Cfg File is not present
@@ -210,10 +212,12 @@ usbbcm_device_probe(struct usb_interface *intf, const struct usb_device_id *id)
                 * download the files.
                 */
                if (-ENOENT == retval) {
-                       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "File Not Found, Use App to Download\n");
+                       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                               "File Not Found.  Use app to download.\n");
                        return STATUS_SUCCESS;
                }
-               BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "InterfaceAdapterInit Failed \n");
+               BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                       "InterfaceAdapterInit failed.\n");
                usb_set_intfdata(intf, NULL);
                udev = interface_to_usbdev(intf);
                usb_put_dev(udev);
@@ -238,7 +242,8 @@ usbbcm_device_probe(struct usb_interface *intf, const struct usb_device_id *id)
                        usb_enable_autosuspend(udev);
                        device_init_wakeup(&intf->dev, 1);
                        INIT_WORK(&psIntfAdapter->usbSuspendWork, putUsbSuspend);
-                       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Enabling USB Auto-Suspend\n");
+                       BCM_DEBUG_PRINT(psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                               "Enabling USB Auto-Suspend\n");
 #endif
                } else {
                        intf->needs_remote_wakeup = 0;
@@ -278,7 +283,8 @@ static int AllocUsbCb(PS_INTERFACE_ADAPTER psIntfAdapter)
        for (i = 0; i < MAXIMUM_USB_TCB; i++) {
                if ((psIntfAdapter->asUsbTcb[i].urb =
                                usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Cant allocate Tx urb for index %d", i);
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0,
+                               "Can't allocate Tx urb for index %d\n", i);
                        return -ENOMEM;
                }
        }
@@ -286,12 +292,14 @@ static int AllocUsbCb(PS_INTERFACE_ADAPTER psIntfAdapter)
        for (i = 0; i < MAXIMUM_USB_RCB; i++) {
                if ((psIntfAdapter->asUsbRcb[i].urb =
                                usb_alloc_urb(0, GFP_KERNEL)) == NULL) {
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Cant allocate Rx urb for index %d", i);
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0,
+                               "Can't allocate Rx urb for index %d\n", i);
                        return -ENOMEM;
                }
                if ((psIntfAdapter->asUsbRcb[i].urb->transfer_buffer =
                        kmalloc(MAX_DATA_BUFFER_SIZE, GFP_KERNEL)) == NULL) {
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Cant allocate Rx buffer for index %d", i);
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0,
+                               "Can't allocate Rx buffer for index %d\n", i);
                        return -ENOMEM;
                }
                psIntfAdapter->asUsbRcb[i].urb->transfer_buffer_length = MAX_DATA_BUFFER_SIZE;
@@ -311,7 +319,8 @@ static int device_run(PS_INTERFACE_ADAPTER psIntfAdapter)
        }
        if (TRUE == psIntfAdapter->psAdapter->fw_download_done) {
                if (StartInterruptUrb(psIntfAdapter)) {
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Cannot send interrupt in URB");
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                       "Cannot send interrupt in URB\n");
                }
 
                /*
@@ -323,10 +332,10 @@ static int device_run(PS_INTERFACE_ADAPTER psIntfAdapter)
                                        psIntfAdapter->psAdapter->waiting_to_fw_download_done, 5*HZ);
 
                if (value == 0)
-                       pr_err(DRV_NAME ": Mailbox Interrupt has not reached to Driver..\n");
+                       pr_err(DRV_NAME ": Timeout waiting for mailbox interrupt.\n");
 
                if (register_control_device_interface(psIntfAdapter->psAdapter) < 0) {
-                       pr_err(DRV_NAME ": Register Control Device failed...\n");
+                       pr_err(DRV_NAME ": Register Control Device failed.\n");
                        return -EIO;
                }
        }
@@ -452,18 +461,21 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
                        /* selecting alternate setting one as a default setting for High Speed  modem. */
                        if (psIntfAdapter->bHighSpeedDevice)
                                retval= usb_set_interface(psIntfAdapter->udev, DEFAULT_SETTING_0, ALTERNATE_SETTING_1);
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "BCM16 is Applicable on this dongle");
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                               "BCM16 is applicable on this dongle\n");
                        if (retval || (psIntfAdapter->bHighSpeedDevice == FALSE)) {
                                usedIntOutForBulkTransfer = EP2 ;
                                endpoint = &iface_desc->endpoint[EP2].desc;
-                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Interface altsetting  got failed or Moemd is configured to FS.hence will work on default setting 0 \n");
+                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                        "Interface altsetting failed or modem is configured to Full Speed, hence will work on default setting 0\n");
                                /*
                                 * If Modem is high speed device EP2 should be INT OUT End point
                                 * If Mode is FS then EP2 should be bulk end point
                                 */
                                if (((psIntfAdapter->bHighSpeedDevice == TRUE) && (bcm_usb_endpoint_is_int_out(endpoint) == FALSE))
                                        || ((psIntfAdapter->bHighSpeedDevice == FALSE) && (bcm_usb_endpoint_is_bulk_out(endpoint) == FALSE))) {
-                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Configuring the EEPROM ");
+                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                               "Configuring the EEPROM\n");
                                        /* change the EP2, EP4 to INT OUT end point */
                                        ConfigureEndPointTypesThroughEEPROM(psIntfAdapter->psAdapter);
 
@@ -474,7 +486,8 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
                                         */
                                        retval = usb_reset_device(psIntfAdapter->udev);
                                        if (retval) {
-                                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "reset got failed. hence Re-enumerating the device \n");
+                                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                                       "reset failed.  Re-enumerating the device.\n");
                                                return retval ;
                                        }
 
@@ -482,15 +495,18 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
                                if ((psIntfAdapter->bHighSpeedDevice == FALSE) && bcm_usb_endpoint_is_bulk_out(endpoint)) {
                                        /* Once BULK is selected in FS mode. Revert it back to INT. Else USB_IF will fail. */
                                        UINT _uiData = ntohl(EP2_CFG_INT);
-                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Reverting Bulk to INT as it is FS MODE");
+                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, 
+                                               "Reverting Bulk to INT as it is in Full Speed mode.\n");
                                        BeceemEEPROMBulkWrite(psIntfAdapter->psAdapter, (PUCHAR)&_uiData, 0x136, 4, TRUE);
                                }
                        } else {
                                usedIntOutForBulkTransfer = EP4 ;
                                endpoint = &iface_desc->endpoint[EP4].desc;
-                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Choosing AltSetting as a default setting");
+                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                       "Choosing AltSetting as a default setting.\n");
                                if (bcm_usb_endpoint_is_int_out(endpoint) == FALSE) {
-                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, " Dongle does not have BCM16 Fix");
+                                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                               "Dongle does not have BCM16 Fix.\n");
                                        /* change the EP2, EP4 to INT OUT end point and use EP4 in altsetting */
                                        ConfigureEndPointTypesThroughEEPROM(psIntfAdapter->psAdapter);
 
@@ -501,7 +517,8 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
                                         */
                                        retval = usb_reset_device(psIntfAdapter->udev);
                                        if (retval) {
-                                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "reset got failed. hence Re-enumerating the device \n");
+                                               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                                                       "reset failed.  Re-enumerating the device.\n");
                                                return retval;
                                        }
 
@@ -580,7 +597,8 @@ static int InterfaceAdapterInit(PS_INTERFACE_ADAPTER psIntfAdapter)
        retval = CreateInterruptUrb(psIntfAdapter);
 
        if (retval) {
-               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0, "Cannot create interrupt urb");
+               BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_PRINTK, 0, 0,
+                       "Cannot create interrupt urb\n");
                return retval;
        }
 
@@ -603,10 +621,12 @@ static int InterfaceSuspend(struct usb_interface *intf, pm_message_t message)
 
                if (psIntfAdapter->psAdapter->LinkStatus == LINKUP_DONE) {
                        psIntfAdapter->psAdapter->IdleMode = TRUE ;
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Host Entered in PMU Idle Mode..");
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                               "Host Entered in PMU Idle Mode.\n");
                } else {
                        psIntfAdapter->psAdapter->bShutStatus = TRUE;
-                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Host Entered in PMU Shutdown Mode..");
+                       BCM_DEBUG_PRINT(psIntfAdapter->psAdapter, DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL,
+                               "Host Entered in PMU Shutdown Mode.\n");
                }
        }
        psIntfAdapter->psAdapter->bPreparingForLowPowerMode = FALSE;