]> git.karo-electronics.de Git - mv-sheeva.git/commitdiff
Input: xpad - fix resource reclaim in xpad_probe error path
authorAxel Lin <axel.lin@gmail.com>
Fri, 12 Nov 2010 05:47:42 +0000 (21:47 -0800)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>
Fri, 12 Nov 2010 06:02:23 +0000 (22:02 -0800)
Properly free the resources in error path by the reverse order of resource
allocation.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
drivers/input/joystick/xpad.c

index e8b2ece3e01e496a5b88b5110e5388182cfe97d7..5fce724339323d2262c01c65352c69a69ca70e03 100644 (file)
@@ -760,8 +760,9 @@ static void xpad_close(struct input_dev *dev)
 {
        struct usb_xpad *xpad = input_get_drvdata(dev);
 
-       if(xpad->xtype != XTYPE_XBOX360W)
+       if (xpad->xtype != XTYPE_XBOX360W)
                usb_kill_urb(xpad->irq_in);
+
        xpad_stop_output(xpad);
 }
 
@@ -896,15 +897,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
        error = xpad_init_output(intf, xpad);
        if (error)
-               goto fail2;
+               goto fail3;
 
        error = xpad_init_ff(xpad);
        if (error)
-               goto fail3;
+               goto fail4;
 
        error = xpad_led_probe(xpad);
        if (error)
-               goto fail3;
+               goto fail5;
 
        ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
        usb_fill_int_urb(xpad->irq_in, udev,
@@ -916,7 +917,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
        error = input_register_device(xpad->dev);
        if (error)
-               goto fail4;
+               goto fail6;
 
        usb_set_intfdata(intf, xpad);
 
@@ -931,7 +932,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
                xpad->irq_in->dev = xpad->udev;
                error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
                if (error)
-                       goto fail4;
+                       goto fail7;
 
                /*
                 * Setup the message to set the LEDs on the
@@ -940,13 +941,13 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
                xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
                if (!xpad->bulk_out) {
                        error = -ENOMEM;
-                       goto fail5;
+                       goto fail8;
                }
 
                xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
                if (!xpad->bdata) {
                        error = -ENOMEM;
-                       goto fail6;
+                       goto fail9;
                }
 
                xpad->bdata[2] = 0x08;
@@ -972,10 +973,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
        return 0;
 
- fail6:        usb_free_urb(xpad->bulk_out);
- fail5:        usb_kill_urb(xpad->irq_in);
- fail4:        usb_free_urb(xpad->irq_in);
- fail3:        xpad_deinit_output(xpad);
+ fail9:        usb_free_urb(xpad->bulk_out);
+ fail8:        usb_kill_urb(xpad->irq_in);
+ fail7:        input_unregister_device(input_dev);
+       input_dev = NULL;
+ fail6:        xpad_led_disconnect(xpad);
+ fail5:        if (input_dev)
+               input_ff_destroy(input_dev);
+ fail4:        xpad_deinit_output(xpad);
+ fail3:        usb_free_urb(xpad->irq_in);
  fail2:        usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:        input_free_device(input_dev);
        kfree(xpad);