#define MAX_FRAGMENTEDIP_CLASSIFICATION_ENTRIES 256
#include "Debug.h"
-typedef struct _LIST_ENTRY{
- struct _LIST_ENTRY *next;
- struct _LIST_ENTRY *prev;
-} LIST_ENTRY, *PLIST_ENTRY;
-
-typedef struct _BCM_LIST_ENTRY {
-
- LIST_ENTRY Link;
-
-} BCM_LIST_ENTRY, *PBCM_LIST_ENTRY;
-
-typedef enum _RCB_STATUS
-{
- DRIVER_PROCESSED=1,
- APPLICATION_PROCESSED
-} RCB_STATUS, *PRCB_STATUS;
-
-#define fFILLED 1
-#define fEMPTY 0
-
-struct _BCM_CB
-{
- // The network packet that this RCB is receiving
- PVOID pv_packet;
- // Describes the length of the packet .
- UINT ui_packet_length;
- // Pointer to the first buffer in the packet (only one buffer for Rx)
- PUCHAR buffer;
- atomic_t status;
- UINT filled;
-} __attribute__((packed));
-typedef struct _BCM_CB BCM_CB,*PBCM_CB;
-
-typedef BCM_CB BCM_RCB, *PBCM_RCB;
-typedef BCM_CB BCM_TCB, *PBCM_TCB;
-
struct _LEADER
{
USHORT Vcid;
unsigned int usIdleModePattern;
//BOOLEAN bTriedToWakeUpFromShutdown;
BOOLEAN bLinkDownRequested;
- unsigned int check_for_hang;
+
int downloadDDR;
PHS_DEVICE_EXTENSION stBCMPhsContext;
S_HDR_SUPRESSION_CONTEXTINFO stPhsTxContextInfo;
#define GET_BCM_ADAPTER(net_dev) netdev_priv(net_dev)
-typedef struct _DEVICE_EXTENSION
-{
- PMINI_ADAPTER pAdapt;
-}DEVICE_EXTENSION,*PDEVICE_EXTENSION;
-
-
struct _ETH_HEADER_STRUC {
UCHAR au8DestinationAddress[6];
UCHAR au8SourceAddress[6];
Adapter->usIdleModePattern = ABORT_IDLE_MODE;
Adapter->bWakeUpDevice = TRUE;
wake_up(&Adapter->process_rx_cntrlpkt);
- #if 0
- Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
- InterfaceAbortIdlemode (Adapter, Adapter->usIdleModePattern);
- #endif
}
Status = STATUS_SUCCESS;
break;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.offset :%d" ,sFlash2xWrite.offset);
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.numOfBytes :%x" ,sFlash2xWrite.numOfBytes);
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"\nsFlash2xRead.bVerify :%x\n" ,sFlash2xWrite.bVerify);
- #if 0
- if((sFlash2xWrite.Section == ISO_IMAGE1) ||(sFlash2xWrite.Section == ISO_IMAGE2) ||
- (sFlash2xWrite.Section == DSD0) || (sFlash2xWrite.Section == DSD1) || (sFlash2xWrite.Section == DSD2))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"ISO/DSD Image write is not allowed.... ");
- return STATUS_FAILURE ;
- }
- #endif
if((sFlash2xWrite.Section != VSA0) && (sFlash2xWrite.Section != VSA1) &&
(sFlash2xWrite.Section != VSA2) )
{
Adapter->bAllDSDWriteAllow = FALSE ;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"IOCTL_BCM_IDENTIFY_ACTIVE_SECTION called");
- #if 0
- SECTION_TYPE section = 0 ;
-
-
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "IOCTL_BCM_IDENTIFY_ACTIVE_SECTION Called");
- Status = copy_from_user((PCHAR)&IoBuffer, (PCHAR)arg, sizeof(IOCTL_BUFFER));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy of IOCTL BUFFER failed");
- return -EFAULT;
- }
- Status = copy_from_user((PCHAR)section,(PCHAR)&IoBuffer, sizeof(INT));
- if(Status)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL, "Copy of section type failed failed");
- return -EFAULT;
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,"Read Section :%d", section);
- if(section == DSD)
- Adapter->ulFlashCalStart = Adapter->uiActiveDSDOffsetAtFwDld ;
- else
- Status = STATUS_FAILURE ;
- #endif
Status = STATUS_SUCCESS ;
}
break ;
pstAddIndication->sfAuthorizedSet.u32MaxTrafficBurst);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MinReservedTrafficRate : 0x%X",
pstAddIndication->sfAuthorizedSet.u32MinReservedTrafficRate);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MinimumTolerableTrafficRate : 0x%X",
- pstAddIndication->sfAuthorizedSet.u32MinimumTolerableTrafficRate);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32RequesttransmissionPolicy : 0x%X",
- pstAddIndication->sfAuthorizedSet.u32RequesttransmissionPolicy);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8VendorSpecificQoSParamLength : 0x%X",
pstAddIndication->sfAuthorizedSet.u8VendorSpecificQoSParamLength);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8VendorSpecificQoSParam : 0x%X",
pstAddIndication->sfAuthorizedSet.u8PagingPreference);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u16UnsolicitedPollingInterval : 0x%X",
pstAddIndication->sfAuthorizedSet.u16UnsolicitedPollingInterval);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "MBSZoneIdentifierassignmentLength : 0x%X",
- pstAddIndication->sfAuthorizedSet.MBSZoneIdentifierassignmentLength);
- for(uiLoopIndex=0; uiLoopIndex < MAX_STRING_LEN; uiLoopIndex++)
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "MBSZoneIdentifierassignment : 0x%X",
- pstAddIndication->sfAuthorizedSet.MBSZoneIdentifierassignment[uiLoopIndex]);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "sfAuthorizedSet.u8HARQChannelMapping %x %x %x ",
*(unsigned int*)pstAddIndication->sfAuthorizedSet.u8HARQChannelMapping,
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[0],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[1],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[2]);
-#if 0
-
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u8ProtocolLength :0x%X ",
- psfCSType->cCPacketClassificationRule.u8ProtocolLength);
-#endif
for(uiLoopIndex=0; uiLoopIndex < 1; uiLoopIndex++)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Protocol : 0x%02X ",
pstAddIndication->sfAdmittedSet.u8QosParamSet);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8TrafficPriority : 0x%02X",
pstAddIndication->sfAdmittedSet.u8TrafficPriority);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32MaxSustainedTrafficRate : 0x%02X",
- ntohl(pstAddIndication->sfAdmittedSet.u32MaxSustainedTrafficRate));
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32MinimumTolerableTrafficRate : 0x%X",
- pstAddIndication->sfAdmittedSet.u32MinimumTolerableTrafficRate);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32RequesttransmissionPolicy : 0x%X",
- pstAddIndication->sfAdmittedSet.u32RequesttransmissionPolicy);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MaxTrafficBurst : 0x%X",
pstAddIndication->sfAdmittedSet.u32MaxTrafficBurst);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MinReservedTrafficRate : 0x%X",
pstAddIndication->sfAdmittedSet.u16TimeBase);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8PagingPreference : 0x%X",
pstAddIndication->sfAdmittedSet.u8PagingPreference);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "MBSZoneIdentifierassignmentLength : 0x%X",
- pstAddIndication->sfAdmittedSet.MBSZoneIdentifierassignmentLength);
- for(uiLoopIndex=0; uiLoopIndex < MAX_STRING_LEN; uiLoopIndex++)
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "MBSZoneIdentifierassignment : 0x%X",
- pstAddIndication->sfAdmittedSet.MBSZoneIdentifierassignment[uiLoopIndex]);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8TrafficIndicationPreference : 0x%02X",
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[0],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[1],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[2]);
-#if 0
-
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8ProtocolLength :0x%02X ",
- psfCSType->cCPacketClassificationRule.u8ProtocolLength);
-#endif
for(uiLoopIndex=0; uiLoopIndex < 1; uiLoopIndex++)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8Protocol: 0x%02X ",
psfCSType->cCPacketClassificationRule.u8Protocol);
pstAddIndication->sfActiveSet.u8QosParamSet);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8TrafficPriority : 0x%02X",
pstAddIndication->sfActiveSet.u8TrafficPriority);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32MaxSustainedTrafficRate : 0x%02X",
- ntohl(pstAddIndication->sfActiveSet.u32MaxSustainedTrafficRate));
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MaxTrafficBurst : 0x%X",
pstAddIndication->sfActiveSet.u32MaxTrafficBurst);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u32MinReservedTrafficRate : 0x%X",
pstAddIndication->sfActiveSet.u32MinReservedTrafficRate);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32MinimumTolerableTrafficRate : 0x%X",
- pstAddIndication->sfActiveSet.u32MinimumTolerableTrafficRate);
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "u32RequesttransmissionPolicy : 0x%X",
- pstAddIndication->sfActiveSet.u32RequesttransmissionPolicy);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8VendorSpecificQoSParamLength : 0x%02X",
pstAddIndication->sfActiveSet.u8VendorSpecificQoSParamLength);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, "u8VendorSpecificQoSParam : 0x%02X",
pstAddIndication->sfActiveSet.u16TimeBase);
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " u8PagingPreference : 0x%X",
pstAddIndication->sfActiveSet.u8PagingPreference);
-#if 0
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " MBSZoneIdentifierassignmentLength : 0x%X",
- pstAddIndication->sfActiveSet.MBSZoneIdentifierassignmentLength);
- for(uiLoopIndex=0; uiLoopIndex < MAX_STRING_LEN; uiLoopIndex++)
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " MBSZoneIdentifierassignment : 0x%X",
- pstAddIndication->sfActiveSet.MBSZoneIdentifierassignment[uiLoopIndex]);
-#endif
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " u8TrafficIndicationPreference : 0x%X",
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[0],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[1],
psfCSType->cCPacketClassificationRule.u8IPTypeOfService[2]);
-#if 0
-
- BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, " u8ProtocolLength :0x%X ",
- psfCSType->cCPacketClassificationRule.u8ProtocolLength);
-#endif
for(uiLoopIndex=0; uiLoopIndex < 1; uiLoopIndex++)
BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL, " u8Protocol : 0x%X ",
psfCSType->cCPacketClassificationRule.u8Protocol);
{0x0f000840,0x0FFF1B00},
{0x0f000870,0x00000002}
};
-#if 0
-static DDR_SET_NODE asDPLL_800MHZ[] = {
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x03F1365B},
- {0x0f000840,0x0FFF0000},
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000}
- };
-#endif
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
static DDR_SET_NODE asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
DEQUEUEPACKET(Adapter->RxControlHead,Adapter->RxControlTail);
// Adapter->RxControlHead=ctrl_packet->next;
}
- #if 0 //Idle mode debug profiling...
- if(*(PUSHORT)ctrl_packet->data == IDLE_MODE_STATUS)
- {
- puiBuffer = (PUINT)(ctrl_packet->data +sizeof(USHORT));
- if((ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD))
- {
- memset(&tv, 0, sizeof(tv));
- do_gettimeofday(&tv);
- if((ntohl(*(puiBuffer+1)) == 0))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, CP_CTRL_PKT, DBG_LVL_ALL, "IdleMode Wake-up Msg from f/w at time :%ld ms", tv.tv_sec *1000 + tv.tv_usec /1000);
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, CP_CTRL_PKT, DBG_LVL_ALL, "IdleMode req Msg from f/w at time :%ld ms", tv.tv_sec *1000 + tv.tv_usec /1000);
- }
- }
- else if((ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, CP_CTRL_PKT, DBG_LVL_ALL, "GOT IDLE_MODE_SF_UPDATE MSG at time :%ld ms", tv.tv_sec *1000 + tv.tv_usec /1000);
- }
- }
- #endif
spin_unlock_irqrestore (&Adapter->control_queue_lock, flags);
handle_rx_control_packet(Adapter, ctrl_packet);
return retval;
}
-#if 0
-static int bcm_download_buffer(PMINI_ADAPTER Adapter,
- unsigned char *mappedbuffer, unsigned int u32FirmwareLength,
- unsigned long u32StartingAddress)
-{
- char *buff=NULL;
- unsigned int len = 0;
- int retval = STATUS_SUCCESS;
- buff = kzalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
-
- len = u32FirmwareLength;
-
- while(u32FirmwareLength)
- {
- len = MIN_VAL (u32FirmwareLength, MAX_TRANSFER_CTRL_BYTE_USB);
- if(STATUS_SUCCESS != (retval = copy_from_user(buff,
- (unsigned char *)mappedbuffer, len)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "copy_from_user failed\n");
- break;
- }
- retval = wrm (Adapter, u32StartingAddress, buff, len);
- if(retval)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "wrm failed\n");
- break;
- }
- u32StartingAddress += len;
- u32FirmwareLength -= len;
- mappedbuffer +=len;
- }
- kfree(buff);
- return retval;
-}
-#endif
static int bcm_compare_buff_contents(unsigned char *readbackbuff,
unsigned char *buff,unsigned int len)
{
}
return retval;
}
-#if 0
-static int bcm_buffer_readback(PMINI_ADAPTER Adapter,
- unsigned char *mappedbuffer, unsigned int u32FirmwareLength,
- unsigned long u32StartingAddress)
-{
- unsigned char *buff = NULL;
- unsigned char *readbackbuff = NULL;
- unsigned int len = u32FirmwareLength;
- int retval = STATUS_SUCCESS;
-
- buff=(unsigned char *)kzalloc(MAX_TRANSFER_CTRL_BYTE_USB, GFP_KERNEL);
- if(NULL == buff)
- return -ENOMEM;
- readbackbuff = (unsigned char *)kzalloc(MAX_TRANSFER_CTRL_BYTE_USB,
- GFP_KERNEL);
- if(NULL == readbackbuff)
- {
- kfree(buff);
- return -ENOMEM;
- }
- while (u32FirmwareLength && !retval)
- {
- len = MIN_VAL (u32FirmwareLength, MAX_TRANSFER_CTRL_BYTE_USB);
-
- /* read from the appl buff and then read from the target, compare */
- if(STATUS_SUCCESS != (retval = copy_from_user(buff,
- (unsigned char *)mappedbuffer, len)))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "copy_from_user failed\n");
- break;
- }
- retval = rdm (Adapter, u32StartingAddress, readbackbuff, len);
- if(retval)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "rdm failed\n");
- break;
- }
-
- if (STATUS_SUCCESS !=
- (retval = bcm_compare_buff_contents (readbackbuff, buff, len)))
- {
- break;
- }
- u32StartingAddress += len;
- u32FirmwareLength -= len;
- mappedbuffer +=len;
- }/* end of while (u32FirmwareLength && !retval) */
- kfree(buff);
- kfree(readbackbuff);
- return retval;
-}
-#endif
int bcm_ioctl_fw_download(PMINI_ADAPTER Adapter, FIRMWARE_INFO *psFwInfo)
{
int retval = STATUS_SUCCESS;
goto error ;
}
- #if 0
- retval = bcm_download_buffer(Adapter,
- (unsigned char *)psFwInfo->pvMappedFirmwareAddress,
- psFwInfo->u32FirmwareLength, psFwInfo->u32StartingAddress);
- if(retval != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "User space buffer download fails....");
- }
- retval = bcm_buffer_readback (Adapter,
- (unsigned char *)psFwInfo->pvMappedFirmwareAddress,
- psFwInfo->u32FirmwareLength, psFwInfo->u32StartingAddress);
-
- if(retval != STATUS_SUCCESS)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL, "read back verifier failed ....");
- }
- #endif
retval = buffDnldVerify(Adapter,
buff,
psFwInfo->u32FirmwareLength,
Adapter->bTriedToWakeUpFromlowPowerMode = FALSE;
wake_up(&Adapter->lowpower_mode_wait_queue);
- #if 0
- if(Adapter->LEDInfo.led_thread_running & BCM_LED_THREAD_RUNNING_ACTIVELY)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL,"LED Thread is Running. Hence Setting the LED Event as IDLEMODE_EXIT");
- Adapter->DriverState = IDLEMODE_EXIT;
- wake_up(&Adapter->LEDInfo.notify_led_event);
- }
- #endif
}
else
return 0;
}
-#if 0
-static void print_usb_interface_desc(struct usb_interface_descriptor *usb_intf_desc)
-{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "**************** INTERFACE DESCRIPTOR *********************");
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bLength: %x", usb_intf_desc->bLength);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bDescriptorType: %x", usb_intf_desc->bDescriptorType);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceNumber: %x", usb_intf_desc->bInterfaceNumber);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bAlternateSetting: %x", usb_intf_desc->bAlternateSetting);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bNumEndpoints: %x", usb_intf_desc->bNumEndpoints);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceClass: %x", usb_intf_desc->bInterfaceClass);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceSubClass: %x", usb_intf_desc->bInterfaceSubClass);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterfaceProtocol: %x", usb_intf_desc->bInterfaceProtocol);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "iInterface :%x\n",usb_intf_desc->iInterface);
-}
-static void print_usb_endpoint_descriptor(struct usb_endpoint_descriptor *usb_ep_desc)
-{
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "**************** ENDPOINT DESCRIPTOR *********************");
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bLength :%x ", usb_ep_desc->bLength);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bDescriptorType :%x ", usb_ep_desc->bDescriptorType);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bEndpointAddress :%x ", usb_ep_desc->bEndpointAddress);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bmAttributes :%x ", usb_ep_desc->bmAttributes);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "wMaxPacketSize :%x ",usb_ep_desc->wMaxPacketSize);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "bInterval :%x ",usb_ep_desc->bInterval);
-}
-
-#endif
static inline int bcm_usb_endpoint_num(const struct usb_endpoint_descriptor *epd)
{
PLEADER pLeader = urb->transfer_buffer;
- #if 0
- int *puiBuffer = NULL;
- struct timeval tv;
- memset(&tv, 0, sizeof(tv));
- do_gettimeofday(&tv);
- #endif
if((Adapter->device_removed == TRUE) ||
(TRUE == Adapter->bEndPointHalted) ||
PMINI_ADAPTER psAdapter = psIntfAdapter->psAdapter ;
BOOLEAN bpowerDownMsg = FALSE ;
PMINI_ADAPTER Adapter = GET_BCM_ADAPTER(gblpnetdev);
-#if 0
- struct timeval tv;
- UINT time_ms = 0;
-#endif
if(urb->status != STATUS_SUCCESS)
{
if(urb->status == -EPIPE)
if(TRUE == psAdapter->bPreparingForLowPowerMode)
{
- #if 0
- do_gettimeofday(&tv);
- time_ms = tv.tv_sec *1000 + tv.tv_usec/1000;
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, " %s Idle Mode ACK_Sent got from device at time :0x%x", __FUNCTION__, time_ms);
- #endif
if(((pControlMsg->szData[0] == GO_TO_IDLE_MODE_PAYLOAD) &&
(pControlMsg->szData[1] == TARGET_CAN_GO_TO_IDLE_MODE)))
return ;
}
-#if 0
- PruneQueue(Adapter,(psSF-Adapter->PackInfo));
-#endif
spin_lock_bh(&psSF->SFQueueLock);
QueuePacket=psSF->FirstTxQueue;
/*Setting bIdleMode_tx_from_host to TRUE to indicate LED control thread to represent
the wake up from idlemode is from host*/
//Adapter->LEDInfo.bIdleMode_tx_from_host = TRUE;
-#if 0
- if(STATUS_SUCCESS != InterfaceIdleModeWakeup(Adapter))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Idle Mode Wake up Failed\n");
- return STATUS_FAILURE;
- }
-#endif
Adapter->bWakeUpDevice = TRUE;
wake_up(&Adapter->process_rx_cntrlpkt);
goto OUT;
}
}
-#if 0
- else if(psAdapter->eNVMType == NVM_EEPROM)
- {
- PropagateCalParamsFromEEPROMToMemory();
- }
-#endif
/* Download Firmare */
if ((status = BcmFileDownload( ps_adapter, BIN_FILE, FIRMWARE_BEGIN_ADDR)))
if (psAdapter->bIsAutoCorrectEnabled && (psAdapter->chip_id >= T3LPB))
{
//If reporting mode is enable, switch PMU to PMC
- #if 0
- if(reporting_mode == FALSE)
- {
- psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN;
- psAdapter->bDoSuspend = TRUE;
- BCM_DEBUG_PRINT(psAdapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL,"PMU selected ....");
-
- }
- else
- #endif
{
psAdapter->ulPowerSaveMode = DEVICE_POWERSAVE_MODE_AS_PMU_CLOCK_GATING;
psAdapter->bDoSuspend =FALSE;
}
#endif
-#if 0
-INT ReadMacAddressFromEEPROM(PMINI_ADAPTER Adapter)
-{
- unsigned char *puMacAddr = NULL;
- int i =0;
-
- puMacAddr = ReadMacAddrEEPROM(Adapter,0x200);
- if(!puMacAddr)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Couldn't retrieve the Mac Address\n");
- return STATUS_FAILURE;
- }
- else
- {
- if((puMacAddr[0] == 0x0 && puMacAddr[1] == 0x0 &&
- puMacAddr[2] == 0x0 && puMacAddr[3] == 0x0 &&
- puMacAddr[4] == 0x0 && puMacAddr[5] == 0x0) ||
- (puMacAddr[0] == 0xFF && puMacAddr[1] == 0xFF &&
- puMacAddr[2] == 0xFF && puMacAddr[3] == 0xFF &&
- puMacAddr[4] == 0xFF && puMacAddr[5] == 0xFF))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "Invalid Mac Address\n");
- kfree(puMacAddr);
- return STATUS_FAILURE;
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, NEXT_SEND, DBG_LVL_ALL, "The Mac Address received is: \n");
- memcpy(Adapter->dev->dev_addr, puMacAddr, MAC_ADDRESS_SIZE);
- for(i=0;i<MAC_ADDRESS_SIZE;i++)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%02x ", Adapter->dev->dev_addr[i]);
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"\n");
- kfree(puMacAddr);
- }
- return STATUS_SUCCESS;
-}
-#endif
static void convertEndian(B_UINT8 rwFlag, PUINT puiBuffer, UINT uiByteCount)
{
//if protocol is not TCP or UDP then no need of comparing source port and destination port
if(iphd->protocol!=TCP && iphd->protocol!=UDP)
break;
-#if 0
- //check if memory is available of src and Dest port
- if(ETH_AND_IP_HEADER_LEN + L4_SRC_PORT_LEN + L4_DEST_PORT_LEN > Packet->len)
- {
- //This is not an erroneous condition and pkt will be checked for next classification.
- bClassificationSucceed = FALSE;
- break;
- }
-#endif
//******************Checking Transport Layer Header field if present *****************//
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL, "Source Port %04x",
(iphd->protocol==UDP)?xprt_hdr->uhdr.source:xprt_hdr->thdr.source);
while((Adapter->device_removed == FALSE))
{
- #if 0
- if(0 == num_of_time_tx && 0 == num_of_time_rx)
- {
- timeout = 1000;
- Status = wait_event_interruptible_timeout(Adapter->LEDInfo.notify_led_event,
- currdriverstate!= Adapter->DriverState || kthread_should_stop(),
- msecs_to_jiffies (timeout));
- if(kthread_should_stop())
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL, "Led thread got signal to exit..hence exiting");
- Adapter->LEDInfo.led_thread_running= BCM_LED_THREAD_DISABLED;
- return EVENT_SIGNALED;
- }
- if(Status)
- return EVENT_SIGNALED;
-
- }
- #endif
-
timeout = 50;
- #if 0
- /*Turn on LED if Tx is high bandwidth*/
- if(num_of_time_tx > MAX_NUM_OF_BLINKS)
- {
- TURN_ON_LED(1<<GPIO_Num_tx, uiTxLedIndex);
- num_of_time_tx = 0;
- bBlinkBothLED = FALSE;
- num_of_time = num_of_time_rx;
- }
- /*Turn on LED if Rx is high bandwidth*/
- if(num_of_time_rx > MAX_NUM_OF_BLINKS)
- {
- TURN_ON_LED(1<<GPIO_Num_rx, uiRxLedIndex);
- num_of_time_rx = 0;
- bBlinkBothLED = FALSE;
- num_of_time = num_of_time_tx;
- }
- #endif
/*Blink Tx and Rx LED when both Tx and Rx is in normal bandwidth*/
if(bBlinkBothLED)
{
if(uiNum_of_LED_Type >= NUM_OF_LEDS)
*bEnableThread = FALSE;
-#if 0
- for(uiIndex=0; uiIndex<NUM_OF_LEDS; uiIndex++)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_Type = %x\n", uiIndex,
- Adapter->LEDInfo.LEDState[uiIndex].LED_Type);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_On_State = %x\n", uiIndex,
- Adapter->LEDInfo.LEDState[uiIndex].LED_On_State);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].LED_Blink_State = %x\n", uiIndex,
- Adapter->LEDInfo.LEDState[uiIndex].LED_Blink_State);
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LEDState[%d].GPIO_Num = %x\n", uiIndex,
- Adapter->LEDInfo.LEDState[uiIndex].GPIO_Num);
- }
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: Polarity = %d\n",
- Adapter->LEDInfo.BitPolarty);
-#endif
return Status;
}
//--------------------------------------------------------------------------
TURN_OFF_LED(1<<GPIO_num, uiLedIndex);
return ;//STATUS_FAILURE;
}
- #if 0
- if(Adapter->device_removed)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"Device removed hence exiting from Led Thread..");
- return ; //-ENODEV;
- }
- #endif
- #if 0
- if((GPIO_num != DISABLE_GPIO_NUM) &&
- ((currdriverstate != FW_DOWNLOAD) &&
- (currdriverstate != NORMAL_OPERATION) &&
- (currdriverstate != IDLEMODE_EXIT)))
- TURN_OFF_LED(1<<GPIO_num, uiLedIndex);
- #endif
if(GPIO_num != DISABLE_GPIO_NUM)
{
case DRIVER_INIT:
{
currdriverstate = DRIVER_INIT;//Adapter->DriverState;
- #if 0
- LedGpioInit(Adapter);
- Adapter->LEDInfo.bLedInitDone = TRUE;
- #endif
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
if(GPIO_num != DISABLE_GPIO_NUM)
{
//BCM_DEBUG_PRINT (Adapter,DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,"LED Thread: FW_DN_DONE called\n");
currdriverstate = FW_DOWNLOAD;
- #if 0
- if(Adapter->LEDInfo.bLedInitDone == FALSE)
- {
- LedGpioInit(Adapter);
- Adapter->LEDInfo.bLedInitDone = TRUE;
- }
- #endif
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum, &uiLedIndex, &dummyIndex, currdriverstate);
if(GPIO_num != DISABLE_GPIO_NUM)
break;
case SHUTDOWN_EXIT:
- #if 0
- if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN)
- {
- LedGpioInit(Adapter);
- }
- #endif
//no break, continue to NO_NETWORK_ENTRY state as well.
case NO_NETWORK_ENTRY:
break;
case IDLEMODE_EXIT:
{
-#if 0
- UCHAR GPIO_num_tx = DISABLE_GPIO_NUM;
- UCHAR GPIO_num_rx = DISABLE_GPIO_NUM;
- UCHAR uiTxLedIndex = 0;
- UCHAR uiRxLedIndex = 0;
-
- currdriverstate = IDLEMODE_EXIT;
- if(DEVICE_POWERSAVE_MODE_AS_PMU_SHUTDOWN == Adapter->ulPowerSaveMode)
- {
- LedGpioInit(Adapter);
- }
- BcmGetGPIOPinInfo(Adapter, &GPIO_num_tx, &GPIO_num_rx, &uiTxLedIndex,&uiRxLedIndex,currdriverstate);
-
- Adapter->LEDInfo.bIdle_led_off = FALSE;
-
- if((GPIO_num_tx == DISABLE_GPIO_NUM) && (GPIO_num_rx == DISABLE_GPIO_NUM))
- {
- GPIO_num = DISABLE_GPIO_NUM ;
- }
- else
- {
- timeout = 50;
- if(Adapter->LEDInfo.bIdleMode_tx_from_host)
- LED_Blink(Adapter, 1<<GPIO_num_tx, uiTxLedIndex, timeout, -1,currdriverstate);
- else
- LED_Blink(Adapter, 1<<GPIO_num_rx, uiRxLedIndex, timeout, -1,currdriverstate);
- }
-#endif
}
break;
case DRIVER_HALT:
} /* ReadBeceemEEPROM() */
-#if 0
-//-----------------------------------------------------------------------------
-// Procedure: IsEEPROMWriteDone
-//
-// Description: Reads the SPI status to see the status of previous write.
-//
-// Arguments:
-// Adapter - ptr to Adapter object instance
-//
-// Returns:
-// BOOLEAN - TRUE - write went through
-// - FALSE - Write Failed.
-//-----------------------------------------------------------------------------
-
-BOOLEAN IsEEPROMWriteDone(PMINI_ADAPTER Adapter)
-{
- UINT uiRetries = 16;
- //UINT uiStatus = 0;
- UINT value;
-
- //sleep for 1.2ms ..worst case EEPROM write can take up to 1.2ms.
- mdelay(2);
-
- value = 0;
- rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
-
- while(((value >> 14) & 1) == 1)
- {
- // EEPROM_SPI_Q_STATUS1_REG will be cleared only if write back to that.
- value = (0x1 << 14);
- wrmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG,&value, sizeof(value));
- udelay(1000);
- uiRetries--;
- if(uiRetries == 0)
- {
- return FALSE;
- }
- value = 0;
- rdmalt(Adapter, EEPROM_SPI_Q_STATUS1_REG, &value, sizeof(value));
- }
- return TRUE;
-
-
-}
-
-
-//-----------------------------------------------------------------------------
-// Procedure: ReadBeceemEEPROMBulk
-//
-// Description: This routine reads 16Byte data from EEPROM
-//
-// Arguments:
-// Adapter - ptr to Adapter object instance
-// dwAddress - EEPROM Offset to read the data from.
-// pdwData - Pointer to double word where data needs to be stored in.
-//
-// Returns:
-// OSAL_STATUS_CODE:
-//-----------------------------------------------------------------------------
-
-INT ReadBeceemEEPROMBulk(PMINI_ADAPTER Adapter,DWORD dwAddress, DWORD *pdwData)
-{
- DWORD dwRetries = 16;
- DWORD dwIndex = 0;
- UINT value, tmpVal;
-
-
- value = 0;
- rdmalt (Adapter, 0x0f003008, &value, sizeof(value));
-
- //read 0x0f003020 untill bit 1 of 0x0f003008 is set.
- while(((value >> 1) & 1) == 0)
- {
-
- rdmalt (Adapter, 0x0f003020, &tmpVal, sizeof(tmpVal));
- dwRetries--;
- if(dwRetries == 0)
- {
- return -1;
- }
- value = 0;
- rdmalt (Adapter, 0x0f003008, &value, sizeof(value));
- }
-
- value = dwAddress | 0xfb000000;
- wrmalt (Adapter, 0x0f003018, &value, sizeof(value));
-
- udelay(1000);
- value = 0;
- for(dwIndex = 0;dwIndex < 4 ; dwIndex++)
- {
- value = 0;
- rdmalt (Adapter, 0x0f003020, &value, sizeof(value));
- pdwData[dwIndex] = value;
-
- value = 0;
- rdmalt (Adapter, 0x0f003020, &value, sizeof(value));
- pdwData[dwIndex] |= (value << 8);
-
- value = 0;
- rdmalt (Adapter, 0x0f003020, &value, sizeof(value));
- pdwData[dwIndex] |= (value << 16);
-
- value = 0;
- rdmalt (Adapter, 0x0f003020, &value, sizeof(value));
- pdwData[dwIndex] |= (value << 24);
-
- }
- return 0;
-}
-
-//-----------------------------------------------------------------------------
-// Procedure: ReadBeceemEEPROM
-//
-// Description: This routine reads 4Byte data from EEPROM
-//
-// Arguments:
-// Adapter - ptr to Adapter object instance
-// dwAddress - EEPROM Offset to read the data from.
-// pdwData - Pointer to double word where data needs to be stored in.
-//
-// Returns:
-// OSAL_STATUS_CODE:
-//-----------------------------------------------------------------------------
-
-INT ReadBeceemEEPROM(PMINI_ADAPTER Adapter,DWORD dwAddress, DWORD *pdwData)
-{
-
- DWORD dwReadValue = 0;
- DWORD dwRetries = 16, dwCompleteWord = 0;
- UINT value, tmpVal;
-
- rdmalt(Adapter, 0x0f003008, &value, sizeof(value));
- while (((value >> 1) & 1) == 0) {
- rdmalt(Adapter, 0x0f003020, &tmpVal, sizeof(tmpVal));
-
- if (dwRetries == 0) {
- return -1;
- }
- rdmalt(Adapter, 0x0f003008, &value, sizeof(value));
- }
-
-
- //wrm (0x0f003018, 0xNbXXXXXX) // N is the number of bytes u want to read (0 means 1, f means 16, b is the opcode for page read)
- // Follow it up by N executions of rdm(0x0f003020) to read the rxed bytes from rx queue.
- dwAddress |= 0x3b000000;
- wrmalt(Adapter, 0x0f003018,&dwAddress,4);
- mdelay(10);
- rdmalt(Adapter, 0x0f003020,&dwReadValue,4);
- dwCompleteWord=dwReadValue;
- rdmalt(Adapter, 0x0f003020,&dwReadValue,4);
- dwCompleteWord|=(dwReadValue<<8);
- rdmalt(Adapter, 0x0f003020,&dwReadValue,4);
- dwCompleteWord|=(dwReadValue<<16);
- rdmalt(Adapter, 0x0f003020,&dwReadValue,4);
- dwCompleteWord|=(dwReadValue<<24);
-
- *pdwData = dwCompleteWord;
-
- return 0;
-}
-#endif
INT ReadMacAddressFromNVM(PMINI_ADAPTER Adapter)
{
UINT BcmGetFlashSize(PMINI_ADAPTER Adapter)
{
-#if 0
- if(Adapter->bDDRInitDone)
- {
- return rdm(Adapter,FLASH_CONTIGIOUS_START_ADDR_AFTER_INIT|FLASH_SIZE_ADDR);
- }
-
- return rdm(Adapter,FLASH_CONTIGIOUS_START_ADDR_BEFORE_INIT|FLASH_SIZE_ADDR);
-#endif
if(IsFlash2x(Adapter))
return (Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader + sizeof(DSD_HEADER));
else
return 0;
}
-#if 0
-/***********************************************************************************/
-//
-// WriteBeceemEEPROM: Writes 4 byte data to EEPROM offset.
-//
-// uiEEPROMOffset - Offset to be written to.
-// uiData - Data to be written.
-//
-/***********************************************************************************/
-
-INT WriteBeceemEEPROM(PMINI_ADAPTER Adapter,UINT uiEEPROMOffset, UINT uiData)
-{
- INT Status = 0;
- ULONG ulRdBk = 0;
- ULONG ulRetryCount = 3;
- UINT value;
-
- if(uiEEPROMOffset > EEPROM_END)
- {
-
- return -1;
- }
-
- uiData = htonl(uiData);
- while(ulRetryCount--)
- {
- value = 0x06000000;
- wrmalt(Adapter, 0x0F003018,&value, sizeof(value));//flush the EEPROM FIFO.
- wrmalt(Adapter, 0x0F00301C,&uiData, sizeof(uiData));
- value = 0x3A000000 | uiEEPROMOffset;
- wrmalt(Adapter, 0x0F003018,&value, sizeof(value));
- __udelay(100000);
- //read back and verify.
- Status = ReadBeceemEEPROM(Adapter,uiEEPROMOffset,(UINT *)&ulRdBk);
- if(Status == 0)
- {
- if(ulRdBk == uiData)
- {
- return Status;
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "WriteBeceemEEPROM: Readback does not match\n");
- }
- }
- else
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "WriteBeceemEEPROM: Readback failed\n");
- }
- }
-
- return 0;
-}
-#endif
//-----------------------------------------------------------------------------
// Procedure: FlashSectorErase
UINT uiTemp = 0;
UINT index = 0;
UINT uiPartOffset = 0;
- #if 0
- struct timeval tv1 = {0};
- struct timeval tv2 = {0};
-
- struct timeval tr = {0};
- struct timeval te = {0};
- struct timeval tw = {0};
- struct timeval twv = {0};
- #endif
#if defined(BCM_SHM_INTERFACE) && !defined(FLASH_DIRECT_ACCESS)
Status = bcmflash_raw_write((uiOffset/FLASH_PART_SIZE),(uiOffset % FLASH_PART_SIZE),( unsigned char *)pBuffer,uiNumBytes);
uiNumSectTobeRead++;
}
}
- #if 1
//Check whether Requested sector is writable or not in case of flash2x write. But if write call is
// for DSD calibration, allow it without checking of sector permission
index = index + 1 ;
}
}
- #endif
Adapter->SelectedChip = RESET_CHIP_SELECT;
while(uiNumSectTobeRead)
{
{
for(uiIndex = 0;uiIndex < Adapter->uiSectorSize;uiIndex += MAX_RW_SIZE)
{
-#if 0
- if(0 == BeceemFlashBulkRead(Adapter,uiReadBk,uiOffsetFromSectStart+uiIndex + Adapter->ulFlashCalStart ,MAX_RW_SIZE))
- {
- for(uiReadIndex = 0;uiReadIndex < 4; uiReadIndex++)
- {
- if(*((PUINT)&pTempBuff[uiIndex+uiReadIndex*4]) != uiReadBk[uiReadIndex])
- {
- Status = -1;
- goto BeceemFlashBulkWriteStatus_EXIT;
-
- }
- }
-
- }
-#endif
if(STATUS_SUCCESS == BeceemFlashBulkRead(Adapter,(PUINT)ucReadBk,uiOffsetFromSectStart+uiIndex,MAX_RW_SIZE))
{
Adapter->uiFlashLayoutMajorVersion = uiFlashLayoutMajorVersion;
- #if 0
- if(FLASH_PART_SST25VF080B == Adapter->ulFlashID)
- {
- //
- // 1MB flash has been selected. we have to use 64K as sector size no matter what is kept in FLASH_CS.
- //
- Adapter->uiSectorSize = 0x10000;
- }
- #endif
return STATUS_SUCCESS ;
}
return -EINVAL;
}
- #if 0
- else
- {
- if((SrcSection == VSA0) || (SrcSection == VSA1) || (SrcSection == VSA2))
- {
- if((DstSection != VSA0) && (DstSection != VSA1) && (DstSection != VSA2))
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Source and Destion secton is not of same type");
- return -EINVAL;
- }
- }
-
- }
- #endif
//if offset zero means have to copy complete secton
if(numOfBytes == 0)
UINT uiSectAlignAddr = 0;
UINT sig = 0;
- #if 0
- //if Chenges in Header is allowed, Return back
- if(Adapter->bHeaderChangeAllowed == TRUE)
- {
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "Header Change is allowed");
- return STATUS_SUCCESS ;
- }
- #endif
//making the offset sector alligned
uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
return Status;
}
-#if 0
-UINT getNumOfSubSectionWithWRPermisson(PMINI_ADAPTER Adapter, SECTION_TYPE secType)
-{
-
- UINT numOfWRSubSec = 0;
- switch(secType)
- {
- case ISO :
- if(IsSectionWritable(Adapter,ISO_IMAGE1))
- numOfWRSubSec = numOfWRSubSec + 1;
- if(IsSectionWritable(Adapter,ISO_IMAGE2))
- numOfWRSubSec = numOfWRSubSec + 1;
- break;
-
- case DSD :
- if(IsSectionWritable(Adapter,DSD2))
- numOfWRSubSec = numOfWRSubSec + 1;
- if(IsSectionWritable(Adapter,DSD1))
- numOfWRSubSec = numOfWRSubSec + 1;
- if(IsSectionWritable(Adapter,DSD0))
- numOfWRSubSec = numOfWRSubSec + 1;
- break ;
-
- case VSA :
- //for VSA Add code Here
- default :
- BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL,"Invalid secton<%d> is passed", secType);\
- numOfWRSubSec = 0;
-
- }
- return numOfWRSubSec;
-}
-#endif
BOOLEAN IsSectionExistInFlash(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL section)
{
projects / mv-sheeva.git / commitdiff