V4L/DVB: Remove the usage of I2C_HW_B_CX2388x on ir-kbd-i2c.c

Move the cx88 specific initialization for Hauppauge XVR remotes
into cx88-input, removing the need for test it inside ir-kbd-i2c.

The reference at cx88 for this symbol, at:

drivers/media/video/cx88/cx88-i2c.c:    core->i2c_adap.id = I2C_HW_B_CX2388x;
drivers/media/video/cx88/cx88-vp3054-i2c.c:     vp3054_i2c->adap.id = I2C_HW_B_CX2388x;

Can't be removed yet, since lirc-i2c still uses it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index 9d25d4f492686f20e91f74e24d04c01fdb1c8c91..f53836bb6a5a1322753d0e3938251be9fb791ba9 100644 (file)
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -183,30 +183,3 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 
        return core->i2c_rc;
 }
-
-void cx88_i2c_init_ir(struct cx88_core *core)
-{
-       /* Instantiate the IR receiver device, if present */
-       if (0 == core->i2c_rc) {
-               struct i2c_board_info info;
-               const unsigned short addr_list[] = {
-                       0x18, 0x6b, 0x71,
-                       I2C_CLIENT_END
-               };
-
-               memset(&info, 0, sizeof(struct i2c_board_info));
-               strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
-               /* Use quick read command for probe, some IR chips don't
-                * support writes */
-               i2c_new_probed_device(&core->i2c_adap, &info, addr_list,
-                                     i2c_probe_func_quick_read);
-       }
-}
-
-/* ----------------------------------------------------------------------- */
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */

diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index eccc5e49a3505f5bb057c5a761e59b578cb78b50..d52ce0e3bec9d26fffa398c1b451f76f83681053 100644 (file)
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -609,13 +609,54 @@ void cx88_ir_irq(struct cx88_core *core)
        return;
 }
 
+
+void cx88_i2c_init_ir(struct cx88_core *core)
+{
+       struct i2c_board_info info;
+       const unsigned short addr_list[] = {
+               0x18, 0x6b, 0x71,
+               I2C_CLIENT_END
+       };
+       const unsigned short *addrp;
+       /* Instantiate the IR receiver device, if present */
+       if (0 != core->i2c_rc)
+               return;
+
+       memset(&info, 0, sizeof(struct i2c_board_info));
+       strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+
+       /*
+        * We can't call i2c_new_probed_device() because it uses
+        * quick writes for probing and at least some RC receiver
+        * devices only reply to reads.
+        * Also, Hauppauge XVR needs to be specified, as address 0x71
+        * conflicts with another remote type used with saa7134
+        */
+       for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+               info.platform_data = NULL;
+               memset(&core->init_data, 0, sizeof(core->init_data));
+
+               if (*addrp == 0x71) {
+                       /* Hauppauge XVR */
+                       core->init_data.name = "cx88 Hauppauge XVR remote";
+                       core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
+                       core->init_data.type = IR_TYPE_RC5;
+                       core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+
+                       info.platform_data = &core->init_data;
+               }
+               if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+                                       I2C_SMBUS_READ, 0,
+                                       I2C_SMBUS_QUICK, NULL) >= 0) {
+                       info.addr = *addrp;
+                       i2c_new_device(&core->i2c_adap, &info);
+                       break;
+               }
+       }
+}
+
 /* ---------------------------------------------------------------------- */
 
 MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe");
 MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls");
 MODULE_LICENSE("GPL");
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */

diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index bda9e3ee425e17e32b296457e1806e49eb443650..127118f4b650dfca0dc09353315df4ff95823069 100644 (file)
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -31,9 +31,8 @@
 #include <media/videobuf-dma-sg.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/cx2341x.h>
-#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE)
 #include <media/videobuf-dvb.h>
-#endif
+#include <media/ir-kbd-i2c.h>
 
 #include "btcx-risc.h"
 #include "cx88-reg.h"
@@ -377,6 +376,9 @@ struct cx88_core {
        /* IR remote control state */
        struct cx88_IR             *ir;
 
+       /* I2C remote data */
+       struct IR_i2c_init_data    init_data;
+
        struct mutex               lock;
        /* various v4l controls */
        u32                        freq;
@@ -650,7 +652,6 @@ extern const struct videobuf_queue_ops cx8800_vbi_qops;
 /* cx88-i2c.c                                                  */
 
 extern int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
-extern void cx88_i2c_init_ir(struct cx88_core *core);
 
 
 /* ----------------------------------------------------------- */
@@ -688,6 +689,7 @@ int cx88_ir_fini(struct cx88_core *core);
 void cx88_ir_irq(struct cx88_core *core);
 int cx88_ir_start(struct cx88_core *core);
 void cx88_ir_stop(struct cx88_core *core);
+extern void cx88_i2c_init_ir(struct cx88_core *core);
 
 /* ----------------------------------------------------------- */
 /* cx88-mpeg.c                                                 */
@@ -707,10 +709,3 @@ int cx88_set_freq (struct cx88_core  *core,struct v4l2_frequency *f);
 int cx88_get_control(struct cx88_core *core, struct v4l2_control *ctl);
 int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl);
 int cx88_video_mux(struct cx88_core *core, unsigned int input);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- * kate: eol "unix"; indent-width 3; remove-trailing-space on; replace-trailing-space-save on; tab-width 8; replace-tabs off; space-indent off; mixed-indent off
- */

diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 02fbd08112c9970ac37ee1375fbd3766ce20157e..91b2c88d4d72feb765d59aea7c853529e3649ef8 100644 (file)
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -325,25 +325,6 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
                ir_type     = IR_TYPE_RC5;
                ir_codes    = RC_MAP_FUSIONHDTV_MCE;
                break;
-       case 0x0b:
-       case 0x47:
-       case 0x71:
-               if (adap->id == I2C_HW_B_CX2388x) {
-                       /* Handled by cx88-input */
-                       name = "CX2388x remote";
-                       ir_type     = IR_TYPE_RC5;
-                       ir->get_key = get_key_haup_xvr;
-                       if (hauppauge == 1) {
-                               ir_codes    = RC_MAP_HAUPPAUGE_NEW;
-                       } else {
-                               ir_codes    = RC_MAP_RC5_TV;
-                       }
-               } else {
-                       /* Handled by saa7134-input */
-                       name        = "SAA713x remote";
-                       ir_type     = IR_TYPE_OTHER;
-               }
-               break;
        case 0x40:
                name        = "AVerMedia Cardbus remote";
                ir->get_key = get_key_avermedia_cardbus;