char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen);
locking rules:
- none have BKL
dcache_lock rename_lock ->d_lock may block
d_revalidate: no no no yes
d_hash no no no yes
int (*rename) (struct inode *, struct dentry *,
struct inode *, struct dentry *);
int (*readlink) (struct dentry *, char __user *,int);
- int (*follow_link) (struct dentry *, struct nameidata *);
+ void * (*follow_link) (struct dentry *, struct nameidata *);
+ void (*put_link) (struct dentry *, struct nameidata *, void *);
void (*truncate) (struct inode *);
int (*permission) (struct inode *, int, struct nameidata *);
+ int (*check_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *);
int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*removexattr) (struct dentry *, const char *);
+ void (*truncate_range)(struct inode *, loff_t, loff_t);
+ long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len);
+ int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
locking rules:
- all may block, none have BKL
+ all may block
i_mutex(inode)
lookup: yes
create: yes
rename: yes (all) (see below)
readlink: no
follow_link: no
+put_link: no
truncate: yes (see below)
setattr: yes
permission: no
+check_acl: no
getattr: no
setxattr: yes
getxattr: no
listxattr: no
removexattr: yes
+truncate_range: yes
+fallocate: no
+fiemap: no
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
victim.
cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
->truncate() is never called directly - it's a callback, not a
-method. It's called by vmtruncate() - library function normally used by
+method. It's called by vmtruncate() - deprecated library function used by
->setattr(). Locking information above applies to that call (i.e. is
inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been
passed).
struct inode *(*alloc_inode)(struct super_block *sb);
void (*destroy_inode)(struct inode *);
void (*dirty_inode) (struct inode *);
- int (*write_inode) (struct inode *, int);
+ int (*write_inode) (struct inode *, struct writeback_control *wbc);
int (*drop_inode) (struct inode *);
void (*evict_inode) (struct inode *);
void (*put_super) (struct super_block *);
int (*show_options)(struct seq_file *, struct vfsmount *);
ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+ int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
locking rules:
All may block [not true, see below]
- None have BKL
s_umount
alloc_inode:
destroy_inode:
show_options: no (namespace_sem)
quota_read: no (see below)
quota_write: no (see below)
+bdev_try_to_free_page: no (see below)
->statfs() has s_umount (shared) when called by ustat(2) (native or
compat), but that's an accident of bad API; s_umount is used to pin
dqio_sem) (unless an admin really wants to screw up something and
writes to quota files with quotas on). For other details about locking
see also dquot_operations section.
+->bdev_try_to_free_page is called from the ->releasepage handler of
+the block device inode. See there for more details.
--------------------------- file_system_type ---------------------------
prototypes:
int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
+ struct dentry *(*mount) (struct file_system_type *, int,
+ const char *, void *);
void (*kill_sb) (struct super_block *);
locking rules:
- may block BKL
-get_sb yes no
-kill_sb yes no
+ may block
+get_sb yes
+mount yes
+kill_sb yes
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
+->mount() returns ERR_PTR or the root dentry.
->kill_sb() takes a write-locked superblock, does all shutdown work on it,
unlocks and drops the reference.
void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
- int (*launder_page) (struct page *);
+ int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
+ unsigned long *);
+ int (*migratepage)(struct address_space *, struct page *, struct page *);
+ int (*launder_page)(struct page *);
+ int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long);
+ int (*error_remove_page)(struct address_space *, struct page *);
locking rules:
All except set_page_dirty and freepage may block
- BKL PageLocked(page) i_mutex
-writepage: no yes, unlocks (see below)
-readpage: no yes, unlocks
-sync_page: no maybe
-writepages: no
-set_page_dirty no no
-readpages: no
-write_begin: no locks the page yes
-write_end: no yes, unlocks yes
-perform_write: no n/a yes
-bmap: no
-invalidatepage: no yes
-releasepage: no yes
-freepage: no yes
-direct_IO: no
-launder_page: no yes
+ PageLocked(page) i_mutex
+writepage: yes, unlocks (see below)
+readpage: yes, unlocks
+sync_page: maybe
+writepages:
+set_page_dirty no
+readpages:
+write_begin: locks the page yes
+write_end: yes, unlocks yes
+bmap:
+invalidatepage: yes
+releasepage: yes
+freepage: yes
+direct_IO:
+get_xip_mem: maybe
+migratepage: yes (both)
+launder_page: yes
+is_partially_uptodate: yes
+error_remove_page: yes
->write_begin(), ->write_end(), ->sync_page() and ->readpage()
may be called from the request handler (/dev/loop).
not locked.
->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
-filesystems and by the swapper. The latter will eventually go away. All
-instances do not actually need the BKL. Please, keep it that way and don't
-breed new callers.
+filesystems and by the swapper. The latter will eventually go away. Please,
+keep it that way and don't breed new callers.
->invalidatepage() is called when the filesystem must attempt to drop
some or all of the buffers from the page when it is being truncated. It
getting mapped back in and redirtied, it needs to be kept locked
across the entire operation.
- Note: currently almost all instances of address_space methods are
-using BKL for internal serialization and that's one of the worst sources
-of contention. Normally they are calling library functions (in fs/buffer.c)
-and pass foo_get_block() as a callback (on local block-based filesystems,
-indeed). BKL is not needed for library stuff and is usually taken by
-foo_get_block(). It's an overkill, since block bitmaps can be protected by
-internal fs locking and real critical areas are much smaller than the areas
-filesystems protect now.
-
----------------------- file_lock_operations ------------------------------
prototypes:
- void (*fl_insert)(struct file_lock *); /* lock insertion callback */
- void (*fl_remove)(struct file_lock *); /* lock removal callback */
void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
void (*fl_release_private)(struct file_lock *);
locking rules:
- BKL may block
-fl_insert: yes no
-fl_remove: yes no
-fl_copy_lock: yes no
-fl_release_private: yes yes
+ file_lock_lock may block
+fl_copy_lock: yes no
+fl_release_private: maybe no
----------------------- lock_manager_operations ---------------------------
prototypes:
int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
void (*fl_notify)(struct file_lock *); /* unblock callback */
+ int (*fl_grant)(struct file_lock *, struct file_lock *, int);
void (*fl_release_private)(struct file_lock *);
void (*fl_break)(struct file_lock *); /* break_lease callback */
+ int (*fl_mylease)(struct file_lock *, struct file_lock *);
+ int (*fl_change)(struct file_lock **, int);
locking rules:
- BKL may block
-fl_compare_owner: yes no
-fl_notify: yes no
-fl_release_private: yes yes
-fl_break: yes no
-
- Currently only NFSD and NLM provide instances of this class. None of the
-them block. If you have out-of-tree instances - please, show up. Locking
-in that area will change.
+ file_lock_lock may block
+fl_compare_owner: yes no
+fl_notify: yes no
+fl_grant: no no
+fl_release_private: maybe no
+fl_break: yes no
+fl_mylease: yes no
+fl_change yes no
+
--------------------------- buffer_head -----------------------------------
prototypes:
void (*b_end_io)(struct buffer_head *bh, int uptodate);
void (*swap_slot_free_notify) (struct block_device *, unsigned long);
locking rules:
- BKL bd_mutex
-open: no yes
-release: no yes
-ioctl: no no
-compat_ioctl: no no
-direct_access: no no
-media_changed: no no
-unlock_native_capacity: no no
-revalidate_disk: no no
-getgeo: no no
-swap_slot_free_notify: no no (see below)
+ bd_mutex
+open: yes
+release: yes
+ioctl: no
+compat_ioctl: no
+direct_access: no
+media_changed: no
+unlock_native_capacity: no
+revalidate_disk: no
+getgeo: no
+swap_slot_free_notify: no (see below)
media_changed, unlock_native_capacity and revalidate_disk are called only from
check_disk_change().
unsigned long (*get_unmapped_area)(struct file *, unsigned long,
unsigned long, unsigned long, unsigned long);
int (*check_flags)(int);
+ int (*flock) (struct file *, int, struct file_lock *);
+ ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *,
+ size_t, unsigned int);
+ ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *,
+ size_t, unsigned int);
+ int (*setlease)(struct file *, long, struct file_lock **);
};
locking rules:
- All may block.
- BKL
-llseek: no (see below)
-read: no
-aio_read: no
-write: no
-aio_write: no
-readdir: no
-poll: no
-unlocked_ioctl: no
-compat_ioctl: no
-mmap: no
-open: no
-flush: no
-release: no
-fsync: no (see below)
-aio_fsync: no
-fasync: no
-lock: yes
-readv: no
-writev: no
-sendfile: no
-sendpage: no
-get_unmapped_area: no
-check_flags: no
+ All may block except for ->setlease.
+ No VFS locks held on entry except for ->fsync and ->setlease.
+
+->fsync() has i_mutex on inode.
+
+->setlease has the file_list_lock held and must not sleep.
->llseek() locking has moved from llseek to the individual llseek
implementations. If your fs is not using generic_file_llseek, you
Note: this does not protect the file->f_pos against concurrent modifications
since this is something the userspace has to take care about.
-Note: ext2_release() was *the* source of contention on fs-intensive
-loads and dropping BKL on ->release() helps to get rid of that (we still
-grab BKL for cases when we close a file that had been opened r/w, but that
-can and should be done using the internal locking with smaller critical areas).
-Current worst offender is ext2_get_block()...
-
-->fasync() is called without BKL protection, and is responsible for
-maintaining the FASYNC bit in filp->f_flags. Most instances call
-fasync_helper(), which does that maintenance, so it's not normally
-something one needs to worry about. Return values > 0 will be mapped to
-zero in the VFS layer.
+->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags.
+Most instances call fasync_helper(), which does that maintenance, so it's
+not normally something one needs to worry about. Return values > 0 will be
+mapped to zero in the VFS layer.
->readdir() and ->ioctl() on directories must be changed. Ideally we would
move ->readdir() to inode_operations and use a separate method for directory
->read on directories probably must go away - we should just enforce -EISDIR
in sys_read() and friends.
-->fsync() has i_mutex on inode.
-
--------------------------- dquot_operations -------------------------------
prototypes:
int (*write_dquot) (struct dquot *);
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
- BKL mmap_sem PageLocked(page)
-open: no yes
-close: no yes
-fault: no yes can return with page locked
-page_mkwrite: no yes can return with page locked
-access: no yes
+ mmap_sem PageLocked(page)
+open: yes
+close: yes
+fault: yes can return with page locked
+page_mkwrite: yes can return with page locked
+access: yes
->fault() is called when a previously not present pte is about
to be faulted in. The filesystem must find and return the page associated
(if you break something or notice that it is broken and do not fix it yourself
- at least put it here)
-
-ipc/shm.c::shm_delete() - may need BKL.
-->read() and ->write() in many drivers are (probably) missing BKL.
nousb [USB] Disable the USB subsystem
- nowatchdog [KNL] Disable the lockup detector.
+ nowatchdog [KNL] Disable the lockup detector (NMI watchdog).
nowb [ARM]
ARM/NOMADIK ARCHITECTURE
M: Alessandro Rubini <rubini@unipv.it>
+M: Linus Walleij <linus.walleij@stericsson.com>
M: STEricsson <STEricsson_nomadik_linux@list.st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-nomadik/
F: arch/arm/plat-nomadik/
+F: drivers/i2c/busses/i2c-nomadik.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
M: Nelson Castillo <arhuaco@freaks-unidos.net>
F: drivers/rtc/rtc-coh901331.c
F: drivers/watchdog/coh901327_wdt.c
F: drivers/dma/coh901318*
+F: drivers/mfd/ab3100*
+F: drivers/rtc/rtc-ab3100.c
+F: drivers/rtc/rtc-coh901331.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
-ARM/U8500 ARM ARCHITECTURE
+ARM/Ux500 ARM ARCHITECTURE
M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+M: Linus Walleij <linus.walleij@stericsson.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ux500/
+F: drivers/dma/ste_dma40*
+F: drivers/mfd/ab3550*
+F: drivers/mfd/abx500*
+F: drivers/mfd/ab8500*
+F: drivers/mfd/stmpe*
+F: drivers/rtc/rtc-ab8500.c
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
return pci_scan_bus(nr, &it8152_ops, sys);
}
+EXPORT_SYMBOL(dma_set_coherent_mask);
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
+#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40)
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
extern void *kmap_high_get(struct page *page);
extern void kunmap_high(struct page *page);
-extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
-extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
-
/*
* The following functions are already defined by <linux/highmem.h>
* when CONFIG_HIGHMEM is not set.
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
/* Size definitions
* Copyright (C) ARM Limited 1998. All rights reserved.
*/
/* handy sizes */
#define SZ_16 0x00000010
+#define SZ_32 0x00000020
+#define SZ_64 0x00000040
+#define SZ_128 0x00000080
#define SZ_256 0x00000100
#define SZ_512 0x00000200
#define rmb() dmb()
#define wmb() mb()
#else
+#include <asm/memory.h>
#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
ldr r1, [tsk, #TI_FLAGS]
tst r1, #_TIF_WORK_MASK
bne fast_work_pending
+#if defined(CONFIG_IRQSOFF_TRACER)
+ asm_trace_hardirqs_on
+#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
tst r1, #_TIF_WORK_MASK
bne work_pending
no_work_pending:
+#if defined(CONFIG_IRQSOFF_TRACER)
+ asm_trace_hardirqs_on
+#endif
/* perform architecture specific actions before user return */
arch_ret_to_user r1, lr
* All kernel threads share the same mm context; grab a
* reference and switch to it.
*/
- atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
cpumask_set_cpu(cpu, mm_cpumask(mm));
#define AT91_MCI_TRTYP_BLOCK (0 << 19)
#define AT91_MCI_TRTYP_MULTIPLE (1 << 19)
#define AT91_MCI_TRTYP_STREAM (2 << 19)
+#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19)
+#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19)
#define AT91_MCI_BLKR 0x18 /* Block Register */
#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);
-
+EXPORT_SYMBOL(dma_set_coherent_mask);
config ARCH_PXA_ESERIES
bool "PXA based Toshiba e-series PDAs"
select PXA25x
+ select FB_W100
config MACH_E330
bool "Toshiba e330"
@ Let us ensure we jump to resume_after_mmu only when the mcr above
@ actually took effect. They call it the "cpwait" operation.
- mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15
- sub pc, r2, r1, lsr #32 @ jump to virtual addr
+ mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
+ sub pc, r2, r0, lsr #32 @ jump to virtual addr
nop
nop
nop
*/
#include <linux/init.h>
+#include <linux/highmem.h>
#include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
#include <plat/cache-feroceon-l2.h>
-#include "mm.h"
/*
* Low-level cache maintenance operations.
* between which we don't want to be preempted.
*/
-static inline unsigned long l2_start_va(unsigned long paddr)
+static inline unsigned long l2_get_va(unsigned long paddr)
{
#ifdef CONFIG_HIGHMEM
/*
- * Let's do our own fixmap stuff in a minimal way here.
* Because range ops can't be done on physical addresses,
* we simply install a virtual mapping for it only for the
* TLB lookup to occur, hence no need to flush the untouched
- * memory mapping. This is protected with the disabling of
- * interrupts by the caller.
+ * memory mapping afterwards (note: a cache flush may happen
+ * in some circumstances depending on the path taken in kunmap_atomic).
*/
- unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
- unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
- local_flush_tlb_kernel_page(vaddr);
- return vaddr + (paddr & ~PAGE_MASK);
+ void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
+ return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
#else
return __phys_to_virt(paddr);
#endif
}
+static inline void l2_put_va(unsigned long vaddr)
+{
+#ifdef CONFIG_HIGHMEM
+ kunmap_atomic((void *)vaddr);
+#endif
+}
+
static inline void l2_clean_pa(unsigned long addr)
{
__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
- raw_local_irq_save(flags);
- va_start = l2_start_va(start);
+ va_start = l2_get_va(start);
va_end = va_start + (end - start);
+ raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
"mcr p15, 1, %1, c15, c9, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
+ l2_put_va(va_start);
}
static inline void l2_clean_inv_pa(unsigned long addr)
*/
BUG_ON((start ^ end) >> PAGE_SHIFT);
- raw_local_irq_save(flags);
- va_start = l2_start_va(start);
+ va_start = l2_get_va(start);
va_end = va_start + (end - start);
+ raw_local_irq_save(flags);
__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
"mcr p15, 1, %1, c15, c11, 5"
: : "r" (va_start), "r" (va_end));
raw_local_irq_restore(flags);
+ l2_put_va(va_start);
}
static inline void l2_inv_all(void)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
+#include <linux/highmem.h>
#include <asm/system.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include "mm.h"
#define CR_L2 (1 << 26)
dsb();
}
+static inline void l2_unmap_va(unsigned long va)
+{
#ifdef CONFIG_HIGHMEM
-#define l2_map_save_flags(x) raw_local_save_flags(x)
-#define l2_map_restore_flags(x) raw_local_irq_restore(x)
-#else
-#define l2_map_save_flags(x) ((x) = 0)
-#define l2_map_restore_flags(x) ((void)(x))
+ if (va != -1)
+ kunmap_atomic((void *)va);
#endif
+}
-static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
- unsigned long flags)
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
{
#ifdef CONFIG_HIGHMEM
unsigned long va = prev_va & PAGE_MASK;
/*
* Switching to a new page. Because cache ops are
* using virtual addresses only, we must put a mapping
- * in place for it. We also enable interrupts for a
- * short while and disable them again to protect this
- * mapping.
+ * in place for it.
*/
- unsigned long idx;
- raw_local_irq_restore(flags);
- idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
- va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- raw_local_irq_restore(flags | PSR_I_BIT);
- set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
- local_flush_tlb_kernel_page(va);
+ l2_unmap_va(prev_va);
+ va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
}
return va + (pa_offset >> (32 - PAGE_SHIFT));
#else
static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_inv_all();
}
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
/*
* Clean and invalidate partial first cache line.
*/
if (start & (CACHE_LINE_SIZE - 1)) {
- vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+ vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start = (start | (CACHE_LINE_SIZE - 1)) + 1;
* Invalidate all full cache lines between 'start' and 'end'.
*/
while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
* Clean and invalidate partial last cache line.
*/
if (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
start += CACHE_LINE_SIZE;
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
{
- unsigned long vaddr, flags;
+ unsigned long vaddr;
if (start == 0 && end == -1ul) {
xsc3_l2_flush_all();
}
vaddr = -1; /* to force the first mapping */
- l2_map_save_flags(flags);
start &= ~(CACHE_LINE_SIZE - 1);
while (start < end) {
- vaddr = l2_map_va(start, vaddr, flags);
+ vaddr = l2_map_va(start, vaddr);
xsc3_l2_clean_mva(vaddr);
xsc3_l2_inv_mva(vaddr);
start += CACHE_LINE_SIZE;
}
- l2_map_restore_flags(flags);
+ l2_unmap_va(vaddr);
dsb();
}
#include <linux/init.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/highmem.h>
#include <asm/memory.h>
#include <asm/highmem.h>
op(vaddr, len, dir);
kunmap_high(page);
} else if (cache_is_vipt()) {
- pte_t saved_pte;
- vaddr = kmap_high_l1_vipt(page, &saved_pte);
+ /* unmapped pages might still be cached */
+ vaddr = kmap_atomic(page);
op(vaddr + offset, len, dir);
- kunmap_high_l1_vipt(page, saved_pte);
+ kunmap_atomic(vaddr);
}
} else {
vaddr = page_address(page) + offset;
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
+#include <linux/highmem.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
kunmap_high(page);
} else if (cache_is_vipt()) {
- pte_t saved_pte;
- addr = kmap_high_l1_vipt(page, &saved_pte);
+ /* unmapped pages might still be cached */
+ addr = kmap_atomic(page);
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
- kunmap_high_l1_vipt(page, saved_pte);
+ kunmap_atomic(addr);
}
}
pte = TOP_PTE(vaddr);
return pte_page(*pte);
}
-
-#ifdef CONFIG_CPU_CACHE_VIPT
-
-#include <linux/percpu.h>
-
-/*
- * The VIVT cache of a highmem page is always flushed before the page
- * is unmapped. Hence unmapped highmem pages need no cache maintenance
- * in that case.
- *
- * However unmapped pages may still be cached with a VIPT cache, and
- * it is not possible to perform cache maintenance on them using physical
- * addresses unfortunately. So we have no choice but to set up a temporary
- * virtual mapping for that purpose.
- *
- * Yet this VIPT cache maintenance may be triggered from DMA support
- * functions which are possibly called from interrupt context. As we don't
- * want to keep interrupt disabled all the time when such maintenance is
- * taking place, we therefore allow for some reentrancy by preserving and
- * restoring the previous fixmap entry before the interrupted context is
- * resumed. If the reentrancy depth is 0 then there is no need to restore
- * the previous fixmap, and leaving the current one in place allow it to
- * be reused the next time without a TLB flush (common with DMA).
- */
-
-static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
-
-void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
-{
- unsigned int idx, cpu;
- int *depth;
- unsigned long vaddr, flags;
- pte_t pte, *ptep;
-
- if (!in_interrupt())
- preempt_disable();
-
- cpu = smp_processor_id();
- depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-
- idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- ptep = TOP_PTE(vaddr);
- pte = mk_pte(page, kmap_prot);
-
- raw_local_irq_save(flags);
- (*depth)++;
- if (pte_val(*ptep) == pte_val(pte)) {
- *saved_pte = pte;
- } else {
- *saved_pte = *ptep;
- set_pte_ext(ptep, pte, 0);
- local_flush_tlb_kernel_page(vaddr);
- }
- raw_local_irq_restore(flags);
-
- return (void *)vaddr;
-}
-
-void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
-{
- unsigned int idx, cpu = smp_processor_id();
- int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
- unsigned long vaddr, flags;
- pte_t pte, *ptep;
-
- idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- ptep = TOP_PTE(vaddr);
- pte = mk_pte(page, kmap_prot);
-
- BUG_ON(pte_val(*ptep) != pte_val(pte));
- BUG_ON(*depth <= 0);
-
- raw_local_irq_save(flags);
- (*depth)--;
- if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
- set_pte_ext(ptep, saved_pte, 0);
- local_flush_tlb_kernel_page(vaddr);
- }
- raw_local_irq_restore(flags);
-
- if (!in_interrupt())
- preempt_enable();
-}
-
-#endif /* CONFIG_CPU_CACHE_VIPT */
tmp = CROSS_GxICR(irq, new);
x &= GxICR_LEVEL | GxICR_ENABLE;
- if (GxICR(irq) & GxICR_REQUEST) {
+ if (GxICR(irq) & GxICR_REQUEST)
x |= GxICR_REQUEST | GxICR_DETECT;
CROSS_GxICR(irq, new) = x;
tmp = CROSS_GxICR(irq, new);
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+ __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
/* FPGA System register setup*/
__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
static void master_clk_init(struct clk *clk)
{
- return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+ clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
}
static struct clk_ops sh7201_master_clk_ops = {
for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
int divisor = frqcr3_divisors[i];
- if (clk->ops->set_rate(clk, clk->parent->rate /
- divisor, 0) == 0)
+ if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
break;
}
/* For performance reasons, reuse mc area when possible */
if (!mc || mc_size > curr_mc_size) {
- if (mc)
- vfree(mc);
+ vfree(mc);
mc = vmalloc(mc_size);
if (!mc)
break;
if (get_ucode_data(mc, ucode_ptr, mc_size) ||
microcode_sanity_check(mc) < 0) {
- vfree(mc);
break;
}
if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
- if (new_mc)
- vfree(new_mc);
+ vfree(new_mc);
new_rev = mc_header.rev;
new_mc = mc;
mc = NULL; /* trigger new vmalloc */
leftover -= mc_size;
}
- if (mc)
- vfree(mc);
+ vfree(mc);
if (leftover) {
- if (new_mc)
- vfree(new_mc);
+ vfree(new_mc);
state = UCODE_ERROR;
goto out;
}
goto out;
}
- if (uci->mc)
- vfree(uci->mc);
+ vfree(uci->mc);
uci->mc = (struct microcode_intel *)new_mc;
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
s->pics[1].elcr_mask = 0xde;
s->pics[0].pics_state = s;
s->pics[1].pics_state = s;
+ s->pics[0].isr_ack = 0xff;
+ s->pics[1].isr_ack = 0xff;
/*
* Initialize PIO device
ASSERT(!VALID_PAGE(root));
spin_lock(&vcpu->kvm->mmu_lock);
kvm_mmu_free_some_pages(vcpu);
- sp = kvm_mmu_get_page(vcpu, i << 30, i << 30,
+ sp = kvm_mmu_get_page(vcpu, i << (30 - PAGE_SHIFT),
+ i << 30,
PT32_ROOT_LEVEL, 1, ACC_ALL,
NULL);
root = __pa(sp->spt);
return 0;
}
-/* initialize the APIC for the IBS interrupts if available */
+/*
+ * check and reserve APIC extended interrupt LVT offset for IBS if
+ * available
+ *
+ * init_ibs() preforms implicitly cpu-local operations, so pin this
+ * thread to its current CPU
+ */
+
static void init_ibs(void)
{
- ibs_caps = get_ibs_caps();
+ preempt_disable();
+ ibs_caps = get_ibs_caps();
if (!ibs_caps)
- return;
+ goto out;
- if (__init_ibs_nmi()) {
+ if (__init_ibs_nmi() < 0)
ibs_caps = 0;
- return;
- }
+ else
+ printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
- printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n",
- (unsigned)ibs_caps);
+out:
+ preempt_enable();
}
static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
return_ACPI_STATUS(AE_OK);
}
+ /* Disable the GPE in case it's been enabled already. */
+ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+
/*
* Add the GPE information from above to the gpe_event_info block for
* use during dispatch of this GPE.
unsigned long flags;
};
-static int acpi_battery_update(struct acpi_battery *battery);
-
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
inline int acpi_battery_present(struct acpi_battery *battery)
int ret = 0;
struct acpi_battery *battery = to_acpi_battery(psy);
- if (acpi_battery_update(battery))
- return -ENODEV;
-
if (acpi_battery_present(battery)) {
/* run battery update only if it is present */
acpi_battery_get_state(battery);
}
static acpi_status
-acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
- union acpi_object *package)
+acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
+ struct acpi_device_wakeup *wakeup)
{
- int i = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *package = NULL;
union acpi_object *element = NULL;
+ acpi_status status;
+ int i = 0;
- if (!device || !package || (package->package.count < 2))
+ if (!wakeup)
return AE_BAD_PARAMETER;
+ /* _PRW */
+ status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
+ return status;
+ }
+
+ package = (union acpi_object *)buffer.pointer;
+
+ if (!package || (package->package.count < 2)) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
+
element = &(package->package.elements[0]);
- if (!element)
- return AE_BAD_PARAMETER;
+ if (!element) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
if (element->type == ACPI_TYPE_PACKAGE) {
if ((element->package.count < 2) ||
(element->package.elements[0].type !=
ACPI_TYPE_LOCAL_REFERENCE)
- || (element->package.elements[1].type != ACPI_TYPE_INTEGER))
- return AE_BAD_DATA;
- device->wakeup.gpe_device =
+ || (element->package.elements[1].type != ACPI_TYPE_INTEGER)) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
+ wakeup->gpe_device =
element->package.elements[0].reference.handle;
- device->wakeup.gpe_number =
+ wakeup->gpe_number =
(u32) element->package.elements[1].integer.value;
} else if (element->type == ACPI_TYPE_INTEGER) {
- device->wakeup.gpe_number = element->integer.value;
- } else
- return AE_BAD_DATA;
+ wakeup->gpe_device = NULL;
+ wakeup->gpe_number = element->integer.value;
+ } else {
+ status = AE_BAD_DATA;
+ goto out;
+ }
element = &(package->package.elements[1]);
if (element->type != ACPI_TYPE_INTEGER) {
- return AE_BAD_DATA;
+ status = AE_BAD_DATA;
+ goto out;
}
- device->wakeup.sleep_state = element->integer.value;
+ wakeup->sleep_state = element->integer.value;
if ((package->package.count - 2) > ACPI_MAX_HANDLES) {
- return AE_NO_MEMORY;
+ status = AE_NO_MEMORY;
+ goto out;
}
- device->wakeup.resources.count = package->package.count - 2;
- for (i = 0; i < device->wakeup.resources.count; i++) {
+ wakeup->resources.count = package->package.count - 2;
+ for (i = 0; i < wakeup->resources.count; i++) {
element = &(package->package.elements[i + 2]);
- if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
- return AE_BAD_DATA;
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE) {
+ status = AE_BAD_DATA;
+ goto out;
+ }
- device->wakeup.resources.handles[i] = element->reference.handle;
+ wakeup->resources.handles[i] = element->reference.handle;
}
- acpi_gpe_can_wake(device->wakeup.gpe_device, device->wakeup.gpe_number);
+ acpi_gpe_can_wake(wakeup->gpe_device, wakeup->gpe_number);
- return AE_OK;
+ out:
+ kfree(buffer.pointer);
+
+ return status;
}
static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
{
acpi_status status = 0;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *package = NULL;
int psw_error;
- /* _PRW */
- status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
- goto end;
- }
-
- package = (union acpi_object *)buffer.pointer;
- status = acpi_bus_extract_wakeup_device_power_package(device, package);
+ status = acpi_bus_extract_wakeup_device_power_package(device->handle,
+ &device->wakeup);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package"));
goto end;
}
- kfree(buffer.pointer);
-
device->wakeup.flags.valid = 1;
device->wakeup.prepare_count = 0;
acpi_bus_set_run_wake_flags(device);
struct acpi_bus_ops *ops = context;
int type;
unsigned long long sta;
+ struct acpi_device_wakeup wakeup;
struct acpi_device *device;
acpi_status status;
int result;
return AE_OK;
if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
- !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+ !(sta & ACPI_STA_DEVICE_FUNCTIONING)) {
+ acpi_bus_extract_wakeup_device_power_package(handle, &wakeup);
return AE_CTRL_DEPTH;
+ }
/*
* We may already have an acpi_device from a previous enumeration. If
module_param_named(msr, use_msr, int, 0644);
MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
#else
+#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */
+#undef wrmsr
#define rdmsr(x, y, z) do { } while (0)
#define wrmsr(x, y, z) do { } while (0)
#define use_msr 0
#include <linux/ramoops.h>
#define RAMOOPS_KERNMSG_HDR "===="
-#define RAMOOPS_HEADER_SIZE (5 + sizeof(struct timeval))
#define RECORD_SIZE 4096
struct ramoops_context, dump);
unsigned long s1_start, s2_start;
unsigned long l1_cpy, l2_cpy;
- int res;
- char *buf;
+ int res, hdr_size;
+ char *buf, *buf_orig;
struct timeval timestamp;
/* Only dump oopses if dump_oops is set */
return;
buf = (char *)(cxt->virt_addr + (cxt->count * RECORD_SIZE));
+ buf_orig = buf;
+
memset(buf, '\0', RECORD_SIZE);
res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
buf += res;
res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
buf += res;
- l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE));
- l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE) - l2_cpy);
+ hdr_size = buf - buf_orig;
+ l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - hdr_size));
+ l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - hdr_size) - l2_cpy);
s2_start = l2 - l2_cpy;
s1_start = l1 - l1_cpy;
static void mv_xor_tasklet(unsigned long data)
{
struct mv_xor_chan *chan = (struct mv_xor_chan *) data;
- __mv_xor_slot_cleanup(chan);
+ mv_xor_slot_cleanup(chan);
}
static struct mv_xor_desc_slot *
static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
{
- return connector_status_unknown;
+ return connector_status_connected;
}
static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
#include "i915_drm.h"
#include "i915_drv.h"
#include "i915_trace.h"
+#include "../../../platform/x86/intel_ips.h"
#include <linux/pci.h>
#include <linux/vgaarb.h>
#include <linux/acpi.h>
}
EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
+/**
+ * Tells the intel_ips driver that the i915 driver is now loaded, if
+ * IPS got loaded first.
+ *
+ * This awkward dance is so that neither module has to depend on the
+ * other in order for IPS to do the appropriate communication of
+ * GPU turbo limits to i915.
+ */
+static void
+ips_ping_for_i915_load(void)
+{
+ void (*link)(void);
+
+ link = symbol_get(ips_link_to_i915_driver);
+ if (link) {
+ link();
+ symbol_put(ips_link_to_i915_driver);
+ }
+}
+
/**
* i915_driver_load - setup chip and create an initial config
* @dev: DRM device
dev_priv->mchdev_lock = &mchdev_lock;
spin_unlock(&mchdev_lock);
+ ips_ping_for_i915_load();
+
return 0;
out_workqueue_free:
# define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18)
# define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1)
+#define PCH_3DCGDIS1 0x46024
+# define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11)
+
#define FDI_PLL_FREQ_CTL 0x46030
#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24)
#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00
#define ILK_DISPLAY_CHICKEN2 0x42004
#define ILK_DPARB_GATE (1<<22)
#define ILK_VSDPFD_FULL (1<<21)
+#define ILK_DISPLAY_CHICKEN_FUSES 0x42014
+#define ILK_INTERNAL_GRAPHICS_DISABLE (1<<31)
+#define ILK_INTERNAL_DISPLAY_DISABLE (1<<30)
+#define ILK_DISPLAY_DEBUG_DISABLE (1<<29)
+#define ILK_HDCP_DISABLE (1<<25)
+#define ILK_eDP_A_DISABLE (1<<24)
+#define ILK_DESKTOP (1<<23)
#define ILK_DSPCLK_GATE 0x42020
#define ILK_DPARB_CLK_GATE (1<<5)
/* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
general->ssc_freq ? 66 : 48;
else if (IS_GEN5(dev) || IS_GEN6(dev))
dev_priv->lvds_ssc_freq =
- general->ssc_freq ? 120 : 100;
+ general->ssc_freq ? 100 : 120;
else
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 100 : 96;
return index_mask;
}
+static bool has_edp_a(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ if (!IS_MOBILE(dev))
+ return false;
+
+ if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+ return false;
+
+ if (IS_GEN5(dev) &&
+ (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+ return false;
+
+ return true;
+}
+
static void intel_setup_outputs(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (HAS_PCH_SPLIT(dev)) {
dpd_is_edp = intel_dpd_is_edp(dev);
- if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+ if (has_edp_a(dev))
intel_dp_init(dev, DP_A);
if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
I915_WRITE(PCH_3DCGDIS0,
MARIUNIT_CLOCK_GATE_DISABLE |
SVSMUNIT_CLOCK_GATE_DISABLE);
+ I915_WRITE(PCH_3DCGDIS1,
+ VFMUNIT_CLOCK_GATE_DISABLE);
}
I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
- intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
intel_sdvo->is_hdmi = true;
}
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
(1 << INTEL_ANALOG_CLONE_BIT));
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
+ if (intel_sdvo->is_hdmi)
+ intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
return true;
}
attr->index = channel;
attr->dev_attr.attr.name = attrs->in_name;
attr->dev_attr.attr.mode = S_IRUGO;
- attr->dev_attr.attr.owner = THIS_MODULE;
attr->dev_attr.show = s3c_hwmon_ch_show;
ret = device_create_file(dev, &attr->dev_attr);
attr->index = channel;
attr->dev_attr.attr.name = attrs->label_name;
attr->dev_attr.attr.mode = S_IRUGO;
- attr->dev_attr.attr.owner = THIS_MODULE;
attr->dev_attr.show = s3c_hwmon_label_show;
ret = device_create_file(dev, &attr->dev_attr);
v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
V4L2_CID_HUE, -128, 127, 1, 0);
if (!is_cx2583x(state)) {
- default_volume = 228 - cx25840_read(client, 0x8d4);
- default_volume = ((default_volume / 2) + 23) << 9;
+ default_volume = cx25840_read(client, 0x8d4);
+ /*
+ * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume
+ * scale mapping limits to avoid -ERANGE errors when
+ * initializing the volume control
+ */
+ if (default_volume > 228) {
+ /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
+ default_volume = 228;
+ cx25840_write(client, 0x8d4, 228);
+ }
+ else if (default_volume < 20) {
+ /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
+ default_volume = 20;
+ cx25840_write(client, 0x8d4, 20);
+ }
+ default_volume = (((228 - default_volume) >> 1) + 23) << 9;
state->volume = v4l2_ctrl_new_std(&state->hdl,
&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
#include <sound/control.h>
#include <sound/initval.h>
#include <sound/tlv.h>
-#include <media/wm8775.h>
#include "cx88.h"
#include "cx88-reg.h"
int left, right, v, b;
int changed = 0;
u32 old;
- struct v4l2_control client_ctl;
-
- /* Pass volume & balance onto any WM8775 */
- if (value->value.integer.value[0] >= value->value.integer.value[1]) {
- v = value->value.integer.value[0] << 10;
- b = value->value.integer.value[0] ?
- (0x8000 * value->value.integer.value[1]) / value->value.integer.value[0] :
- 0x8000;
- } else {
- v = value->value.integer.value[1] << 10;
- b = value->value.integer.value[1] ?
- 0xffff - (0x8000 * value->value.integer.value[0]) / value->value.integer.value[1] :
- 0x8000;
- }
- client_ctl.value = v;
- client_ctl.id = V4L2_CID_AUDIO_VOLUME;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- client_ctl.value = b;
- client_ctl.id = V4L2_CID_AUDIO_BALANCE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
left = value->value.integer.value[0] & 0x3f;
right = value->value.integer.value[1] & 0x3f;
b = right - left;
if (b < 0) {
- v = 0x3f - left;
- b = (-b) | 0x40;
+ v = 0x3f - left;
+ b = (-b) | 0x40;
} else {
- v = 0x3f - right;
+ v = 0x3f - right;
}
/* Do we really know this will always be called with IRQs on? */
spin_lock_irq(&chip->reg_lock);
old = cx_read(AUD_VOL_CTL);
if (v != (old & 0x3f)) {
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v);
- changed = 1;
+ cx_write(AUD_VOL_CTL, (old & ~0x3f) | v);
+ changed = 1;
}
- if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) {
- cx_write(AUD_BAL_CTL, b);
- changed = 1;
+ if (cx_read(AUD_BAL_CTL) != b) {
+ cx_write(AUD_BAL_CTL, b);
+ changed = 1;
}
spin_unlock_irq(&chip->reg_lock);
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
SNDRV_CTL_ELEM_ACCESS_TLV_READ,
- .name = "Analog-TV Volume",
+ .name = "Playback Volume",
.info = snd_cx88_volume_info,
.get = snd_cx88_volume_get,
.put = snd_cx88_volume_put,
vol = cx_read(AUD_VOL_CTL);
if (value->value.integer.value[0] != !(vol & bit)) {
vol ^= bit;
- cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
- /* Pass mute onto any WM8775 */
- if ((1<<6) == bit) {
- struct v4l2_control client_ctl;
- client_ctl.value = 0 != (vol & bit);
- client_ctl.id = V4L2_CID_AUDIO_MUTE;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
- }
+ cx_write(AUD_VOL_CTL, vol);
ret = 1;
}
spin_unlock_irq(&chip->reg_lock);
static const struct snd_kcontrol_new snd_cx88_dac_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Audio-Out Switch",
+ .name = "Playback Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
static const struct snd_kcontrol_new snd_cx88_source_switch = {
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Analog-TV Switch",
+ .name = "Capture Switch",
.info = snd_ctl_boolean_mono_info,
.get = snd_cx88_switch_get,
.put = snd_cx88_switch_put,
.private_value = (1<<6),
};
-static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl);
- value->value.integer.value[0] = client_ctl.value ? 1 : 0;
-
- return 0;
-}
-
-static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
-{
- snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
- struct cx88_core *core = chip->core;
- struct v4l2_control client_ctl;
-
- client_ctl.value = 0 != value->value.integer.value[0];
- client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
- return 0;
-}
-
-static struct snd_kcontrol_new snd_cx88_alc_switch = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Line-In ALC Switch",
- .info = snd_ctl_boolean_mono_info,
- .get = snd_cx88_alc_get,
- .put = snd_cx88_alc_put,
-};
-
/****************************************************************************
Basic Flow for Sound Devices
****************************************************************************/
{
struct snd_card *card;
snd_cx88_card_t *chip;
- struct v4l2_subdev *sd;
int err;
if (devno >= SNDRV_CARDS)
if (err < 0)
goto error;
- /* If there's a wm8775 then add a Line-In ALC switch */
- list_for_each_entry(sd, &chip->core->v4l2_dev.subdevs, list) {
- if (WM8775_GID == sd->grp_id) {
- snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch,
- chip));
- break;
- }
- }
-
strcpy (card->driver, "CX88x");
sprintf(card->shortname, "Conexant CX%x", pci->device);
sprintf(card->longname, "%s at %#llx",
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
+ .audio_chip = V4L2_IDENT_WM8775,
.input = {{
.type = CX88_VMUX_DVB,
.vmux = 0,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_COMPOSITE1,
.vmux = 1,
+ /* 2: Line-In */
+ .audioroute = 2,
},{
.type = CX88_VMUX_SVIDEO,
.vmux = 2,
+ /* 2: Line-In */
+ .audioroute = 2,
}},
.mpeg = CX88_MPEG_DVB,
},
#include "cx88.h"
#include <media/v4l2-common.h>
#include <media/v4l2-ioctl.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
const struct cx88_ctrl *c = NULL;
u32 value,mask;
int i;
- struct v4l2_control client_ctl;
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == ctl->id) {
ctl->value = c->v.minimum;
if (ctl->value > c->v.maximum)
ctl->value = c->v.maximum;
-
- /* Pass changes onto any WM8775 */
- client_ctl.id = ctl->id;
- switch (ctl->id) {
- case V4L2_CID_AUDIO_MUTE:
- client_ctl.value = ctl->value;
- break;
- case V4L2_CID_AUDIO_VOLUME:
- client_ctl.value = (ctl->value) ?
- (0x90 + ctl->value) << 8 : 0;
- break;
- case V4L2_CID_AUDIO_BALANCE:
- client_ctl.value = ctl->value << 9;
- break;
- default:
- client_ctl.id = 0;
- break;
- }
- if (client_ctl.id)
- call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
mask=c->mask;
switch (ctl->id) {
case V4L2_CID_AUDIO_BALANCE:
if (c->id < V4L2_CID_BASE ||
c->id >= V4L2_CID_LASTP1)
return -EINVAL;
- if (c->id == V4L2_CID_AUDIO_MUTE ||
- c->id == V4L2_CID_AUDIO_VOLUME ||
- c->id == V4L2_CID_AUDIO_BALANCE) {
+ if (c->id == V4L2_CID_AUDIO_MUTE) {
for (i = 0; i < CX8800_CTLS; i++) {
if (cx8800_ctls[i].v.id == c->id)
break;
return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
}
-#define call_hw(core, grpid, o, f, args...) \
+#define call_all(core, o, f, args...) \
do { \
if (!core->i2c_rc) { \
if (core->gate_ctrl) \
core->gate_ctrl(core, 1); \
- v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \
+ v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \
if (core->gate_ctrl) \
core->gate_ctrl(core, 0); \
} \
} while (0)
-#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args)
-
struct cx8800_dev;
struct cx8802_dev;
.owner = THIS_MODULE,
.open = em28xx_v4l2_open,
.release = em28xx_v4l2_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops radio_ioctl_ops = {
ret = soc_camera_set_fmt(icd, &f);
if (ret < 0)
goto esfmt;
+
+ ici->ops->init_videobuf(&icd->vb_vidq, icd);
}
file->private_data = icd;
dev_dbg(&icd->dev, "camera device open\n");
- ici->ops->init_videobuf(&icd->vb_vidq, icd);
-
mutex_unlock(&icd->video_lock);
return 0;
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-ctrls.h>
-#include <media/wm8775.h>
MODULE_DESCRIPTION("wm8775 driver");
MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
TOT_REGS
};
-#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */
-#define ALC_EN 0x100 /* R17: ALC enable */
-
struct wm8775_state {
struct v4l2_subdev sd;
struct v4l2_ctrl_handler hdl;
struct v4l2_ctrl *mute;
- struct v4l2_ctrl *vol;
- struct v4l2_ctrl *bal;
- struct v4l2_ctrl *loud;
u8 input; /* Last selected input (0-0xf) */
};
return -1;
}
-static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly)
-{
- struct wm8775_state *state = to_state(sd);
- u8 vol_l, vol_r;
- int muted = 0 != state->mute->val;
- u16 volume = (u16)state->vol->val;
- u16 balance = (u16)state->bal->val;
-
- /* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */
- vol_l = (min(65536 - balance, 32768) * volume) >> 23;
- vol_r = (min(balance, (u16)32768) * volume) >> 23;
-
- /* Mute */
- if (muted || quietly)
- wm8775_write(sd, R21, 0x0c0 | state->input);
-
- wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */
- wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */
-
- /* Un-mute */
- if (!muted)
- wm8775_write(sd, R21, state->input);
-}
-
static int wm8775_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
state->input = input;
if (!v4l2_ctrl_g_ctrl(state->mute))
return 0;
- if (!v4l2_ctrl_g_ctrl(state->vol))
- return 0;
- if (!v4l2_ctrl_g_ctrl(state->bal))
- return 0;
- wm8775_set_audio(sd, 1);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct wm8775_state *state = to_state(sd);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BALANCE:
- wm8775_set_audio(sd, 0);
- return 0;
- case V4L2_CID_AUDIO_LOUDNESS:
- wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD);
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ if (!ctrl->val)
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
return -EINVAL;
static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
{
- wm8775_set_audio(sd, 0);
+ struct wm8775_state *state = to_state(sd);
+
+ /* If I remove this, then it can happen that I have no
+ sound the first time I tune from static to a valid channel.
+ It's difficult to reproduce and is almost certainly related
+ to the zero cross detect circuit. */
+ wm8775_write(sd, R21, 0x0c0);
+ wm8775_write(sd, R14, 0x1d4);
+ wm8775_write(sd, R15, 0x1d4);
+ wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
{
struct wm8775_state *state;
struct v4l2_subdev *sd;
- int err;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
- sd->grp_id = WM8775_GID; /* subdev group id */
state->input = 2;
- v4l2_ctrl_handler_init(&state->hdl, 4);
+ v4l2_ctrl_handler_init(&state->hdl, 1);
state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
- state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/
- state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768);
- state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
- V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1);
sd->ctrl_handler = &state->hdl;
- err = state->hdl.error;
- if (err) {
+ if (state->hdl.error) {
+ int err = state->hdl.error;
+
v4l2_ctrl_handler_free(&state->hdl);
kfree(state);
return err;
wm8775_write(sd, R23, 0x000);
/* Disable zero cross detect timeout */
wm8775_write(sd, R7, 0x000);
- /* HPF enable, I2S mode, 24-bit */
- wm8775_write(sd, R11, 0x022);
+ /* Left justified, 24-bit mode */
+ wm8775_write(sd, R11, 0x021);
/* Master mode, clock ratio 256fs */
wm8775_write(sd, R12, 0x102);
/* Powered up */
wm8775_write(sd, R13, 0x000);
- /* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */
- wm8775_write(sd, R16, 0x1bb);
- /* Set ALC mode and hold time */
- wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R14, 0x1d4);
+ /* ADC gain +2.5dB, enable zero cross */
+ wm8775_write(sd, R15, 0x1d4);
+ /* ALC Stereo, ALC target level -1dB FS max gain +8dB */
+ wm8775_write(sd, R16, 0x1bf);
+ /* Enable gain control, use zero cross detection,
+ ALC hold time 42.6 ms */
+ wm8775_write(sd, R17, 0x185);
/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
wm8775_write(sd, R18, 0x0a2);
/* Enable noise gate, threshold -72dBfs */
wm8775_write(sd, R19, 0x005);
- /* Transient window 4ms, ALC min gain -5dB */
- wm8775_write(sd, R20, 0x0fb);
-
- wm8775_set_audio(sd, 1); /* set volume/mute/mux */
-
+ /* Transient window 4ms, lower PGA gain limit -1dB */
+ wm8775_write(sd, R20, 0x07a);
+ /* LRBOTH = 1, use input 2. */
+ wm8775_write(sd, R21, 0x102);
return 0;
}
case PM_POST_SUSPEND:
case PM_POST_HIBERNATION:
+ case PM_POST_RESTORE:
spin_lock_irqsave(&host->lock, flags);
host->rescan_disable = 0;
#include <linux/highmem.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
#include <asm/io.h>
#include <asm/irq.h>
else if (data->flags & MMC_DATA_WRITE)
cmdr |= AT91_MCI_TRCMD_START;
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= AT91_MCI_TRTYP_STREAM;
- if (data->blocks > 1)
- cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
+ } else {
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= AT91_MCI_TRTYP_STREAM;
+ if (data->blocks > 1)
+ cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+ }
}
else {
block_length = 0;
#include <linux/stat.h>
#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
data = cmd->data;
if (data) {
cmdr |= MCI_CMDR_START_XFER;
- if (data->flags & MMC_DATA_STREAM)
- cmdr |= MCI_CMDR_STREAM;
- else if (data->blocks > 1)
- cmdr |= MCI_CMDR_MULTI_BLOCK;
- else
- cmdr |= MCI_CMDR_BLOCK;
+
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= MCI_CMDR_SDIO_BLOCK;
+ } else {
+ if (data->flags & MMC_DATA_STREAM)
+ cmdr |= MCI_CMDR_STREAM;
+ else if (data->blocks > 1)
+ cmdr |= MCI_CMDR_MULTI_BLOCK;
+ else
+ cmdr |= MCI_CMDR_BLOCK;
+ }
if (data->flags & MMC_DATA_READ)
cmdr |= MCI_CMDR_TRDIR_READ;
static int __init select_detection_mode(void)
{
struct dummy_slot *slot, *tmp;
- pcie_port_service_register(&dummy_driver);
+ if (pcie_port_service_register(&dummy_driver))
+ return PCIEHP_DETECT_ACPI;
pcie_port_service_unregister(&dummy_driver);
list_for_each_entry_safe(slot, tmp, &dummy_slots, list) {
list_del(&slot->list);
#include <drm/i915_drm.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include "intel_ips.h"
#define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
#define thm_writel(off, val) writel((val), ips->regmap + (off))
static const int IPS_ADJUST_PERIOD = 5000; /* ms */
+static bool late_i915_load = false;
/* For initial average collection */
static const int IPS_SAMPLE_PERIOD = 200; /* ms */
u64 orig_turbo_ratios;
};
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips);
+
/**
* ips_cpu_busy - is CPU busy?
* @ips: IPS driver struct
*/
static bool ips_gpu_busy(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return false;
return ips->gpu_busy();
*/
static void ips_gpu_raise(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return;
if (!ips->gpu_raise())
*/
static void ips_gpu_lower(struct ips_driver *ips)
{
- if (!ips->gpu_turbo_enabled)
+ if (!ips_gpu_turbo_enabled(ips))
return;
if (!ips->gpu_lower())
return false;
}
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips)
+{
+ if (!ips->gpu_busy && late_i915_load) {
+ if (ips_get_i915_syms(ips)) {
+ dev_info(&ips->dev->dev,
+ "i915 driver attached, reenabling gpu turbo\n");
+ ips->gpu_turbo_enabled = !(thm_readl(THM_HTS) & HTS_GTD_DIS);
+ }
+ }
+
+ return ips->gpu_turbo_enabled;
+}
+
+void
+ips_link_to_i915_driver()
+{
+ /* We can't cleanly get at the various ips_driver structs from
+ * this caller (the i915 driver), so just set a flag saying
+ * that it's time to try getting the symbols again.
+ */
+ late_i915_load = true;
+}
+EXPORT_SYMBOL_GPL(ips_link_to_i915_driver);
+
static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), },
--- /dev/null
+/*
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+void ips_link_to_i915_driver(void);
list_add_tail(&d->list, &intc_list);
raw_spin_lock_init(&d->lock);
+ INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
d->index = nr_intc_controllers;
msg = container_of(mcfqspi->msgq.next, struct spi_message,
queue);
- list_del_init(&mcfqspi->msgq);
+ list_del_init(&msg->queue);
spin_unlock_irqrestore(&mcfqspi->lock, flags);
spi = msg->spi;
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:omap2_mcspi");
+#ifdef CONFIG_SUSPEND
+/*
+ * When SPI wake up from off-mode, CS is in activate state. If it was in
+ * unactive state when driver was suspend, then force it to unactive state at
+ * wake up.
+ */
+static int omap2_mcspi_resume(struct device *dev)
+{
+ struct spi_master *master = dev_get_drvdata(dev);
+ struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
+ struct omap2_mcspi_cs *cs;
+
+ omap2_mcspi_enable_clocks(mcspi);
+ list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs,
+ node) {
+ if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
+
+ /*
+ * We need to toggle CS state for OMAP take this
+ * change in account.
+ */
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0);
+ __raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+ }
+ }
+ omap2_mcspi_disable_clocks(mcspi);
+ return 0;
+}
+#else
+#define omap2_mcspi_resume NULL
+#endif
+
+static const struct dev_pm_ops omap2_mcspi_pm_ops = {
+ .resume = omap2_mcspi_resume,
+};
+
static struct platform_driver omap2_mcspi_driver = {
.driver = {
.name = "omap2_mcspi",
.owner = THIS_MODULE,
+ .pm = &omap2_mcspi_pm_ops
},
.remove = __exit_p(omap2_mcspi_remove),
};
int ret = 0;
struct zram *zram = queue->queuedata;
- if (unlikely(!zram->init_done)) {
- set_bit(BIO_UPTODATE, &bio->bi_flags);
- bio_endio(bio, 0);
- return 0;
- }
-
if (!valid_io_request(zram, bio)) {
zram_stat64_inc(zram, &zram->stats.invalid_io);
bio_io_error(bio);
if (gen->base == hw->base)
return true;
/* is the generic aperture base inside the hw base->hw base+size */
- if (gen->base > hw->base && gen->base <= hw->base + hw->size)
+ if (gen->base > hw->base && gen->base < hw->base + hw->size)
return true;
return false;
}
#define LCDC_SIZE 0x04
#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20)
-#ifdef CONFIG_ARCH_MX1
-#define SIZE_YMAX(y) ((y) & 0x1ff)
-#else
-#define SIZE_YMAX(y) ((y) & 0x3ff)
-#endif
+#define YMAX_MASK (cpu_is_mx1() ? 0x1ff : 0x3ff)
+#define SIZE_YMAX(y) ((y) & YMAX_MASK)
#define LCDC_VPW 0x08
#define VPW_VPW(x) ((x) & 0x3ff)
if (var->right_margin > 255)
printk(KERN_ERR "%s: invalid right_margin %d\n",
info->fix.id, var->right_margin);
- if (var->yres < 1 || var->yres > 511)
+ if (var->yres < 1 || var->yres > YMAX_MASK)
printk(KERN_ERR "%s: invalid yres %d\n",
info->fix.id, var->yres);
if (var->vsync_len > 100)
found_rate_error = rate_error;
}
+ hdmi->var.width = hdmi->monspec.max_x * 10;
+ hdmi->var.height = hdmi->monspec.max_y * 10;
+
/*
* TODO 1: if no ->info is present, postpone running the config until
* after ->info first gets registered.
dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
mode1.xres, mode1.yres, mode2.xres, mode2.yres);
- if (fb_mode_is_equal(&mode1, &mode2))
+ if (fb_mode_is_equal(&mode1, &mode2)) {
+ /* It can be a different monitor with an equal video-mode */
+ old_var->width = new_var->width;
+ old_var->height = new_var->height;
return false;
+ }
dev_dbg(info->dev, "Switching %u -> %u lines\n",
mode1.yres, mode2.yres);
* on, if we run a resume here, the logo disappears
*/
if (lock_fb_info(hdmi->info)) {
- sh_hdmi_display_on(hdmi, hdmi->info);
- unlock_fb_info(hdmi->info);
+ struct fb_info *info = hdmi->info;
+ info->var.width = hdmi->var.width;
+ info->var.height = hdmi->var.height;
+ sh_hdmi_display_on(hdmi, info);
+ unlock_fb_info(info);
}
} else {
/* New monitor or have to wake up */
};
#define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
-#define DEFAULT_XRES 1280
-#define DEFAULT_YRES 1024
+#define MAX_XRES 1920
+#define MAX_YRES 1080
static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
[LDDCKPAT1R] = 0x400,
{
struct sh_mobile_lcdc_chan *ch = info->par;
- if (var->xres < 160 || var->xres > 1920 ||
- var->yres < 120 || var->yres > 1080 ||
- var->left_margin < 32 || var->left_margin > 320 ||
- var->right_margin < 12 || var->right_margin > 240 ||
- var->upper_margin < 12 || var->upper_margin > 120 ||
- var->lower_margin < 1 || var->lower_margin > 64 ||
- var->hsync_len < 32 || var->hsync_len > 240 ||
- var->vsync_len < 2 || var->vsync_len > 64 ||
- var->pixclock < 6000 || var->pixclock > 40000 ||
+ if (var->xres > MAX_XRES || var->yres > MAX_YRES ||
var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
- dev_warn(info->dev, "Invalid info: %u %u %u %u %u %u %u %u %u!\n",
- var->xres, var->yres,
- var->left_margin, var->right_margin,
- var->upper_margin, var->lower_margin,
- var->hsync_len, var->vsync_len,
- var->pixclock);
+ dev_warn(info->dev, "Invalid info: %u-%u-%u-%u x %u-%u-%u-%u @ %ukHz!\n",
+ var->left_margin, var->xres, var->right_margin, var->hsync_len,
+ var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+ PICOS2KHZ(var->pixclock));
return -EINVAL;
}
return 0;
}
if (!mode)
- max_size = DEFAULT_XRES * DEFAULT_YRES;
+ max_size = MAX_XRES * MAX_YRES;
else if (max_cfg)
dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
max_cfg->xres, max_cfg->yres);
mode = &default_720p;
num_cfg = 1;
} else {
- num_cfg = ch->cfg.num_cfg;
+ num_cfg = cfg->num_cfg;
}
fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
fb_videomode_to_var(var, mode);
+ var->width = cfg->lcd_size_cfg.width;
+ var->height = cfg->lcd_size_cfg.height;
/* Default Y virtual resolution is 2x panel size */
var->yres_virtual = var->yres * 2;
var->activate = FB_ACTIVATE_NOW;
#ifdef CONFIG_DMA_ENGINE
enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
void dma_issue_pending_all(void);
+struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
+void dma_release_channel(struct dma_chan *chan);
#else
static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
}
static inline void dma_issue_pending_all(void)
{
- do { } while (0);
+}
+static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask,
+ dma_filter_fn fn, void *fn_param)
+{
+ return NULL;
+}
+static inline void dma_release_channel(struct dma_chan *chan)
+{
}
#endif
void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
-void dma_release_channel(struct dma_chan *chan);
/* --- Helper iov-locking functions --- */
#define WM8775_AIN3 4
#define WM8775_AIN4 8
-/* subdev group ID */
-#define WM8775_GID (1 << 0)
-
#endif
*
* Returns the matching dev_t on success or 0 on failure.
*/
-static dev_t __init devt_from_partuuid(char *uuid_str)
+static dev_t devt_from_partuuid(char *uuid_str)
{
dev_t res = 0;
struct device *dev = NULL;
/* Need to copy one event at a time */
do {
+ /* We need the size of one event, because
+ * rb_advance_reader only advances by one event,
+ * whereas rb_event_ts_length may include the size of
+ * one or two events.
+ * We have already ensured there's enough space if this
+ * is a time extend. */
+ size = rb_event_length(event);
memcpy(bpage->data + pos, rpage->data + rpos, size);
len -= size;
event = rb_reader_event(cpu_buffer);
/* Always keep the time extend and data together */
size = rb_event_ts_length(event);
- } while (len > size);
+ } while (len >= size);
/* update bpage */
local_set(&bpage->commit, pos);
spin_lock_irq(&uidhash_lock);
up = uid_hash_find(uid, hashent);
if (up) {
+ put_user_ns(ns);
key_put(new->uid_keyring);
key_put(new->session_keyring);
kmem_cache_free(uid_cachep, new);
goto out_save;
}
- printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event);
+ printk(KERN_ERR "NMI watchdog disabled for cpu%i: unable to create perf event: %ld\n",
+ cpu, PTR_ERR(event));
return PTR_ERR(event);
/* success path */
rcu_read_lock();
p = rcu_dereference(mm->owner);
- VM_BUG_ON(!p);
/*
- * because we don't have task_lock(), "p" can exit while
- * we're here. In that case, "mem" can point to root
- * cgroup but never be NULL. (and task_struct itself is freed
- * by RCU, cgroup itself is RCU safe.) Then, we have small
- * risk here to get wrong cgroup. But such kind of mis-account
- * by race always happens because we don't have cgroup_mutex().
- * It's overkill and we allow that small race, here.
+ * Because we don't have task_lock(), "p" can exit.
+ * In that case, "mem" can point to root or p can be NULL with
+ * race with swapoff. Then, we have small risk of mis-accouning.
+ * But such kind of mis-account by race always happens because
+ * we don't have cgroup_mutex(). It's overkill and we allo that
+ * small race, here.
+ * (*) swapoff at el will charge against mm-struct not against
+ * task-struct. So, mm->owner can be NULL.
*/
mem = mem_cgroup_from_task(p);
- VM_BUG_ON(!mem);
- if (mem_cgroup_is_root(mem)) {
+ if (!mem || mem_cgroup_is_root(mem)) {
rcu_read_unlock();
goto done;
}
* Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
* Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
* Copyright (c) 2002 Greg Ungerer <gerg@snapgear.com>
- * Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
+ * Copyright (c) 2007-2010 Paul Mundt <lethal@linux-sh.org>
*/
#include <linux/module.h>
{
return vmalloc(size);
}
+EXPORT_SYMBOL(vmalloc_node);
/**
* vzalloc_node - allocate memory on a specific node with zero fill
{
}
+/**
+ * alloc_vm_area - allocate a range of kernel address space
+ * @size: size of the area
+ *
+ * Returns: NULL on failure, vm_struct on success
+ *
+ * This function reserves a range of kernel address space, and
+ * allocates pagetables to map that range. No actual mappings
+ * are created. If the kernel address space is not shared
+ * between processes, it syncs the pagetable across all
+ * processes.
+ */
+struct vm_struct *alloc_vm_area(size_t size)
+{
+ BUG();
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(alloc_vm_area);
+
+void free_vm_area(struct vm_struct *area)
+{
+ BUG();
+}
+EXPORT_SYMBOL_GPL(free_vm_area);
+
int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
struct page *page)
{
}
if (current_entry->prompt && current_entry != &rootmenu)
prop_warn(prop, "prompt redefined");
+
+ /* Apply all upper menus' visibilities to actual prompts. */
+ if(type == P_PROMPT) {
+ struct menu *menu = current_entry;
+
+ while ((menu = menu->parent) != NULL) {
+ if (!menu->visibility)
+ continue;
+ prop->visible.expr
+ = expr_alloc_and(prop->visible.expr,
+ menu->visibility);
+ }
+ }
+
current_entry->prompt = prop;
}
prop->text = prompt;
result = security_filter_rule_init(entry->lsm[lsm_rule].type,
Audit_equal, args,
&entry->lsm[lsm_rule].rule);
+ if (!entry->lsm[lsm_rule].rule)
+ return -EINVAL;
return result;
}
int i, n;
for (i = 0; i < num_mixer_volumes; i++) {
- if (strcmp(name, mixer_vols[i].name) == 0) {
+ if (strncmp(name, mixer_vols[i].name, 32) == 0) {
if (present)
mixer_vols[i].num = i;
return mixer_vols[i].levels;
}
n = num_mixer_volumes++;
- strcpy(mixer_vols[n].name, name);
+ strncpy(mixer_vols[n].name, name, 32);
if (present)
mixer_vols[n].num = n;
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1028, 0x0470, "Dell Inspiron 1120", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
};
struct max98088_priv {
- u8 reg_cache[M98088_REG_CNT];
enum max98088_type devtype;
void *control_data;
struct max98088_pdata *pdata;
static void max98088_sync_cache(struct snd_soc_codec *codec)
{
- struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* write back cached values if they're writeable and
* different from the hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(max98088->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!max98088_access[i].writable)
continue;
- if (max98088->reg_cache[i] == max98088_reg[i])
+ if (reg_cache[i] == max98088_reg[i])
continue;
- snd_soc_write(codec, i, max98088->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
int ret = 0;
codec->cache_sync = 1;
- memcpy(codec->reg_cache, max98088_reg, sizeof(max98088_reg));
ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
if (ret != 0) {
/* codec private data */
struct wm8523_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8523_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
unsigned int sysclk;
unsigned int rate_constraint_list[WM8523_NUM_RATES];
enum snd_soc_bias_level level)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
/* Sync back default/cached values */
for (i = WM8523_AIF_CTRL1;
i < WM8523_MAX_REGISTER; i++)
- snd_soc_write(codec, i, wm8523->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
msleep(100);
static int wm8523_probe(struct snd_soc_codec *codec)
{
struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->hw_write = (hw_write_t)i2c_master_send;
}
/* Change some default settings - latch VU and enable ZC */
- wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
- wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+ reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
+ reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
/* codec private data */
struct wm8741_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8741_REGISTER_COUNT];
struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
unsigned int sysclk;
struct snd_pcm_hw_constraint_list *sysclk_constraints;
static int wm8741_probe(struct snd_soc_codec *codec)
{
struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret = 0;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
}
/* Change some default settings - latch VU */
- wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
- wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
- wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
- wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
+ reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
+ reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
+ reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
+ reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
snd_soc_add_controls(codec, wm8741_snd_controls,
ARRAY_SIZE(wm8741_snd_controls));
* are using 2 wire for device control, so we cache them instead.
*/
static const u16 wm8753_reg[] = {
- 0x0008, 0x0000, 0x000a, 0x000a,
- 0x0033, 0x0000, 0x0007, 0x00ff,
- 0x00ff, 0x000f, 0x000f, 0x007b,
- 0x0000, 0x0032, 0x0000, 0x00c3,
- 0x00c3, 0x00c0, 0x0000, 0x0000,
+ 0x0000, 0x0008, 0x0000, 0x000a,
+ 0x000a, 0x0033, 0x0000, 0x0007,
+ 0x00ff, 0x00ff, 0x000f, 0x000f,
+ 0x007b, 0x0000, 0x0032, 0x0000,
+ 0x00c3, 0x00c3, 0x00c0, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000,
0x0000, 0x0000, 0x0000, 0x0000,
- 0x0000, 0x0000, 0x0000, 0x0055,
- 0x0005, 0x0050, 0x0055, 0x0050,
- 0x0055, 0x0050, 0x0055, 0x0079,
- 0x0079, 0x0079, 0x0079, 0x0079,
0x0000, 0x0000, 0x0000, 0x0000,
- 0x0097, 0x0097, 0x0000, 0x0004,
- 0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0083, 0x0024, 0x01ba,
- 0x0000, 0x0000, 0x0000
+ 0x0055, 0x0005, 0x0050, 0x0055,
+ 0x0050, 0x0055, 0x0050, 0x0055,
+ 0x0079, 0x0079, 0x0079, 0x0079,
+ 0x0079, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0097, 0x0097, 0x0000,
+ 0x0004, 0x0000, 0x0083, 0x0024,
+ 0x01ba, 0x0000, 0x0083, 0x0024,
+ 0x01ba, 0x0000, 0x0000, 0x0000
};
/* codec private data */
enum snd_soc_control_type control_type;
unsigned int sysclk;
unsigned int pcmclk;
- u16 reg_cache[ARRAY_SIZE(wm8753_reg)];
int dai_func;
};
-/*
- * read wm8753 register cache
- */
-static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg)
-{
- u16 *cache = codec->reg_cache;
- if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
- return -1;
- return cache[reg - 1];
-}
-
-/*
- * write wm8753 register cache
- */
-static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec,
- unsigned int reg, unsigned int value)
-{
- u16 *cache = codec->reg_cache;
- if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
- return;
- cache[reg - 1] = value;
-}
-
-/*
- * write to the WM8753 register space
- */
-static int wm8753_write(struct snd_soc_codec *codec, unsigned int reg,
- unsigned int value)
-{
- u8 data[2];
-
- /* data is
- * D15..D9 WM8753 register offset
- * D8...D0 register data
- */
- data[0] = (reg << 1) | ((value >> 8) & 0x0001);
- data[1] = value & 0x00ff;
-
- wm8753_write_reg_cache(codec, reg, value);
- if (codec->hw_write(codec->control_data, data, 2) == 2)
- return 0;
- else
- return -EIO;
-}
-
-#define wm8753_reset(c) wm8753_write(c, WM8753_RESET, 0)
+#define wm8753_reset(c) snd_soc_write(c, WM8753_RESET, 0)
/*
* WM8753 Controls
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+ int mode = snd_soc_read(codec, WM8753_IOCTL);
ucontrol->value.integer.value[0] = (mode & 0xc) >> 2;
return 0;
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+ int mode = snd_soc_read(codec, WM8753_IOCTL);
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
if (((mode & 0xc) >> 2) == ucontrol->value.integer.value[0])
if (pll_id == WM8753_PLL1) {
offset = 0;
enable = 0x10;
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xffef;
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0xffef;
} else {
offset = 4;
enable = 0x8;
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfff7;
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0xfff7;
}
if (!freq_in || !freq_out) {
/* disable PLL */
- wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
- wm8753_write(codec, WM8753_CLOCK, reg);
+ snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
+ snd_soc_write(codec, WM8753_CLOCK, reg);
return 0;
} else {
u16 value = 0;
/* set up N and K PLL divisor ratios */
/* bits 8:5 = PLL_N, bits 3:0 = PLL_K[21:18] */
value = (pll_div.n << 5) + ((pll_div.k & 0x3c0000) >> 18);
- wm8753_write(codec, WM8753_PLL1CTL2 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL2 + offset, value);
/* bits 8:0 = PLL_K[17:9] */
value = (pll_div.k & 0x03fe00) >> 9;
- wm8753_write(codec, WM8753_PLL1CTL3 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL3 + offset, value);
/* bits 8:0 = PLL_K[8:0] */
value = pll_div.k & 0x0001ff;
- wm8753_write(codec, WM8753_PLL1CTL4 + offset, value);
+ snd_soc_write(codec, WM8753_PLL1CTL4 + offset, value);
/* set PLL as input and enable */
- wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
+ snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
(pll_div.div2 << 3));
- wm8753_write(codec, WM8753_CLOCK, reg | enable);
+ snd_soc_write(codec, WM8753_CLOCK, reg | enable);
}
return 0;
}
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01ec;
+ u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01ec;
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_PCM, voice);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3;
- u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f;
+ u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01f3;
+ u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x017f;
/* bit size */
switch (params_format(params)) {
/* sample rate */
if (params_rate(params) * 384 == wm8753->pcmclk)
srate |= 0x80;
- wm8753_write(codec, WM8753_SRATE1, srate);
+ snd_soc_write(codec, WM8753_SRATE1, srate);
- wm8753_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_PCM, voice);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 voice, ioctl;
- voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x011f;
- ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x015d;
+ voice = snd_soc_read(codec, WM8753_PCM) & 0x011f;
+ ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x015d;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_PCM, voice);
- wm8753_write(codec, WM8753_IOCTL, ioctl);
+ snd_soc_write(codec, WM8753_PCM, voice);
+ snd_soc_write(codec, WM8753_IOCTL, ioctl);
return 0;
}
switch (div_id) {
case WM8753_PCMDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0x003f;
- wm8753_write(codec, WM8753_CLOCK, reg | div);
+ reg = snd_soc_read(codec, WM8753_CLOCK) & 0x003f;
+ snd_soc_write(codec, WM8753_CLOCK, reg | div);
break;
case WM8753_BCLKDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x01c7;
- wm8753_write(codec, WM8753_SRATE2, reg | div);
+ reg = snd_soc_read(codec, WM8753_SRATE2) & 0x01c7;
+ snd_soc_write(codec, WM8753_SRATE2, reg | div);
break;
case WM8753_VXCLKDIV:
- reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x003f;
- wm8753_write(codec, WM8753_SRATE2, reg | div);
+ reg = snd_soc_read(codec, WM8753_SRATE2) & 0x003f;
+ snd_soc_write(codec, WM8753_SRATE2, reg | div);
break;
default:
return -EINVAL;
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
- u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01e0;
+ u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01e0;
/* interface format */
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
return 0;
}
struct snd_soc_codec *codec = codec_dai->codec;
u16 ioctl, hifi;
- hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x011f;
- ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x00ae;
+ hifi = snd_soc_read(codec, WM8753_HIFI) & 0x011f;
+ ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x00ae;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
return -EINVAL;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
- wm8753_write(codec, WM8753_IOCTL, ioctl);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_IOCTL, ioctl);
return 0;
}
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_codec *codec = rtd->codec;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0;
- u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3;
+ u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x01c0;
+ u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01f3;
int coeff;
/* is digital filter coefficient valid ? */
printk(KERN_ERR "wm8753 invalid MCLK or rate\n");
return coeff;
}
- wm8753_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
+ snd_soc_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
coeff_div[coeff].usb);
/* bit size */
break;
}
- wm8753_write(codec, WM8753_HIFI, hifi);
+ snd_soc_write(codec, WM8753_HIFI, hifi);
return 0;
}
u16 clock;
/* set clk source as pcmclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock);
if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
u16 clock;
/* set clk source as pcmclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock);
if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
u16 clock;
/* set clk source as mclk */
- clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
- wm8753_write(codec, WM8753_CLOCK, clock | 0x4);
+ clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+ snd_soc_write(codec, WM8753_CLOCK, clock | 0x4);
if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0)
return -EINVAL;
static int wm8753_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- u16 mute_reg = wm8753_read_reg_cache(codec, WM8753_DAC) & 0xfff7;
+ u16 mute_reg = snd_soc_read(codec, WM8753_DAC) & 0xfff7;
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
/* the digital mute covers the HiFi and Voice DAC's on the WM8753.
* make sure we check if they are not both active when we mute */
if (mute && wm8753->dai_func == 1) {
if (!codec->active)
- wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
} else {
if (mute)
- wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+ snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
else
- wm8753_write(codec, WM8753_DAC, mute_reg);
+ snd_soc_write(codec, WM8753_DAC, mute_reg);
}
return 0;
static int wm8753_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
- u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e;
+ u16 pwr_reg = snd_soc_read(codec, WM8753_PWR1) & 0xfe3e;
switch (level) {
case SND_SOC_BIAS_ON:
/* set vmid to 50k and unmute dac */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
break;
case SND_SOC_BIAS_PREPARE:
/* set vmid to 5k for quick power up */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
break;
case SND_SOC_BIAS_STANDBY:
/* mute dac and set vmid to 500k, enable VREF */
- wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
+ snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
break;
case SND_SOC_BIAS_OFF:
- wm8753_write(codec, WM8753_PWR1, 0x0001);
+ snd_soc_write(codec, WM8753_PWR1, 0x0001);
break;
}
codec->bias_level = level;
else
dai->driver = &wm8753_all_dai[(wm8753->dai_func << 1) + 1];
}
- wm8753_write(codec, WM8753_IOCTL, wm8753->dai_func);
+ snd_soc_write(codec, WM8753_IOCTL, wm8753->dai_func);
}
static void wm8753_work(struct work_struct *work)
static int wm8753_resume(struct snd_soc_codec *codec)
{
+ u16 *reg_cache = codec->reg_cache;
int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
/* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
- if (i + 1 == WM8753_RESET)
+ for (i = 1; i < ARRAY_SIZE(wm8753_reg); i++) {
+ if (i == WM8753_RESET)
continue;
/* No point in writing hardware default values back */
- if (cache[i] == wm8753_reg[i])
+ if (reg_cache[i] == wm8753_reg[i])
continue;
- data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
+ snd_soc_write(codec, i, reg_cache[i]);
}
wm8753_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
static int wm8753_probe(struct snd_soc_codec *codec)
{
struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
- int ret = 0, reg;
+ int ret;
INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
msecs_to_jiffies(caps_charge));
/* set the update bits */
- reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
- wm8753_write(codec, WM8753_LDAC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RDAC);
- wm8753_write(codec, WM8753_RDAC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LADC);
- wm8753_write(codec, WM8753_LADC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RADC);
- wm8753_write(codec, WM8753_RADC, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V);
- wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V);
- wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V);
- wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V);
- wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_LINVOL);
- wm8753_write(codec, WM8753_LINVOL, reg | 0x0100);
- reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
- wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
+ snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_ROUT2V, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_LINVOL, 0x0100, 0x0100);
+ snd_soc_update_bits(codec, WM8753_RINVOL, 0x0100, 0x0100);
snd_soc_add_controls(codec, wm8753_snd_controls,
ARRAY_SIZE(wm8753_snd_controls));
/* codec private data */
struct wm8904_priv {
- u16 reg_cache[WM8904_MAX_REGISTER + 1];
-
enum wm8904_type devtype;
void *control_data;
static void wm8904_sync_cache(struct snd_soc_codec *codec)
{
- struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* Sync back cached values if they're different from the
* hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (!wm8904_access[i].writable)
continue;
- if (wm8904->reg_cache[i] == wm8904_reg[i])
+ if (reg_cache[i] == wm8904_reg[i])
continue;
- snd_soc_write(codec, i, wm8904->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
codec->cache_sync = 1;
}
/* Change some default settings - latch VU and enable ZC */
- wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
- wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
- wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
- wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
+ reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
+ reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
+ reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
+ reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
+ reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
WM8904_HPOUTLZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
WM8904_HPOUTRZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTLZC;
- wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
+ reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
WM8904_LINEOUTRZC;
- wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
+ reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
/* Apply configuration from the platform data. */
if (wm8904->pdata) {
if (!pdata->gpio_cfg[i])
continue;
- wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i]
+ reg_cache[WM8904_GPIO_CONTROL_1 + i]
= pdata->gpio_cfg[i] & 0xffff;
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- wm8904->reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
+ reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
= pdata->mic_cfg[i];
}
/* Set Class W by default - this will be managed by the Class
* G widget at runtime where bypass paths are available.
*/
- wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
+ reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
/* Use normal bias source */
- wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
+ reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
i2c_set_clientdata(i2c, wm8940);
wm8940->control_data = i2c;
+ wm8940->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8940, &wm8940_dai, 1);
struct wm8955_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8955_MAX_REGISTER + 1];
-
unsigned int mclk_rate;
int deemph;
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
/* Sync back cached values if they're
* different from the hardware default.
*/
- for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
if (i == WM8955_RESET)
continue;
- if (wm8955->reg_cache[i] == wm8955_reg[i])
+ if (reg_cache[i] == wm8955_reg[i])
continue;
- snd_soc_write(codec, i, wm8955->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
/* Enable VREF and VMID */
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
}
/* Change some default settings - latch VU and enable ZC */
- wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
- wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
- wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
- wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
- wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
- wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
- wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+ reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+ reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+ reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+ reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+ reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+ reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+ reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
/* Also enable adaptive bass boost by default */
- wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+ reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
- wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+ reg_cache[WM8955_ADDITIONAL_CONTROL_2]
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
- wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+ reg_cache[WM8955_MONO_OUT_MIX_1]
|= WM8955_DMEN;
}
return -ENOMEM;
i2c_set_clientdata(i2c, wm8955);
+ wm8955->control_type = SND_SOC_I2C;
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8955, &wm8955_dai, 1);
return -ENOMEM;
i2c_set_clientdata(i2c, wm8960);
+ wm8960->control_type = SND_SOC_I2C;
wm8960->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
struct wm8962_priv {
struct snd_soc_codec *codec;
- u16 reg_cache[WM8962_MAX_REGISTER + 1];
-
int sysclk;
int sysclk_rate;
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int ret;
/* Apply the update (if any) */
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = w->codec;
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
- u16 *reg_cache = wm8962->reg_cache;
+ u16 *reg_cache = codec->reg_cache;
int reg;
switch (w->shift) {
static void wm8962_sync_cache(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int i;
if (!codec->cache_sync)
/* Sync back cached values if they're different from the
* hardware default.
*/
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
if (i == WM8962_SOFTWARE_RESET)
continue;
- if (wm8962->reg_cache[i] == wm8962_reg[i])
+ if (reg_cache[i] == wm8962_reg[i])
continue;
- snd_soc_write(codec, i, wm8962->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
codec->cache_sync = 0;
#ifdef CONFIG_PM
static int wm8962_resume(struct snd_soc_codec *codec)
{
- struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
u16 *reg_cache = codec->reg_cache;
int i;
/* Restore the registers */
- for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+ for (i = 1; i < codec->driver->reg_cache_size; i++) {
switch (i) {
case WM8962_SOFTWARE_RESET:
continue;
struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
dev);
+ u16 *reg_cache = codec->reg_cache;
int i, trigger, irq_pol;
wm8962->codec = codec;
/* Put the speakers into mono mode? */
if (pdata->spk_mono)
- wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2]
+ reg_cache[WM8962_CLASS_D_CONTROL_2]
|= WM8962_SPK_MONO;
/* Micbias setup, detection enable and detection
}
/* Latch volume update bits */
- wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
- wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
- wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
- wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
- wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
+ reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
+ reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
+ reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
+ reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
+ reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
wm8962_add_widgets(codec);
if (wm8971 == NULL)
return -ENOMEM;
+ wm8971->control_type = SND_SOC_I2C;
i2c_set_clientdata(i2c, wm8971);
ret = snd_soc_register_codec(&i2c->dev,
return -ENOMEM;
i2c_set_clientdata(i2c, wm9081);
+ wm9081->control_type = SND_SOC_I2C;
wm9081->control_data = i2c;
ret = snd_soc_register_codec(&i2c->dev,
/* This struct is used to save the context */
struct wm9090_priv {
struct mutex mutex;
- u16 reg_cache[WM9090_MAX_REGISTER + 1];
struct wm9090_platform_data pdata;
void *control_data;
};
static int wm9090_probe(struct snd_soc_codec *codec)
{
struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret;
codec->control_data = wm9090->control_data;
/* Configure some defaults; they will be written out when we
* bring the bias up.
*/
- wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
+ reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1A_ZC;
- wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
+ reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
| WM9090_IN1B_ZC;
- wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
+ reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2A_ZC;
- wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
+ reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
| WM9090_IN2B_ZC;
- wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
+ reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC;
- wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
+ reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC;
- wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
+ reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC;
- wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
+ reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
int depth, int depth_mask, int period,
- u64 total_samples, int hits,
+ u64 total_samples, u64 hits,
int left_margin)
{
int i;
projects / mv-sheeva.git / commitdiff