ARM: pxa: encode IRQ number into .nr_irqs

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 88c97bc7a6f5b7a751b0b628e75a17f4604f82f3..95ad5f913a735973bc5dae7216351e0d8be59244 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -587,6 +587,7 @@ config ARCH_PXA
        select GENERIC_CLOCKEVENTS
        select TICK_ONESHOT
        select PLAT_PXA
+       select SPARSE_IRQ
        help
          Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3d4926edb675f8c966111ed50fa2feede62ba3c7..e2453dba517136acf9b353f2bd2698049ff00e16 100644 (file)
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -8,19 +8,16 @@ config ARCH_LUBBOCK
        bool "Intel DBPXA250 Development Platform (aka Lubbock)"
        select PXA25x
        select SA1111
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
        bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
        select PXA27x
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE
        bool
        select PXA3xx
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_ZYLONITE300
        bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -61,7 +58,6 @@ config ARCH_VIPER
        select ISA
        select I2C_GPIO
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
        select PXA_HAVE_ISA_IRQS
        select ARCOM_PCMCIA
 
@@ -69,7 +65,6 @@ config MACH_ARCOM_ZEUS
        bool "Arcom/Eurotech ZEUS SBC"
        select PXA27x
        select ISA
-       select PXA_HAVE_BOARD_IRQS
        select PXA_HAVE_ISA_IRQS
        select ARCOM_PCMCIA
 
@@ -77,7 +72,6 @@ config MACH_BALLOON3
        bool "Balloon 3 board"
        select PXA27x
        select IWMMXT
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_CSB726
        bool "Enable Cogent CSB726 System On a Module"
@@ -140,13 +134,11 @@ config MACH_INTELMOTE2
        bool "Intel Mote 2 Platform"
        select PXA27x
        select IWMMXT
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_STARGATE2
        bool "Intel Stargate 2 Platform"
        select PXA27x
        select IWMMXT
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_XCEP
        bool "Iskratel Electronics XCEP"
@@ -206,13 +198,11 @@ config MACH_LOGICPD_PXA270
        bool "LogicPD PXA270 Card Engine Development Platform"
        select PXA27x
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM027
        bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
        select PXA27x
        select IWMMXT
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_PCM990_BASEBOARD
        bool "PHYTEC PCM-990 development board"
@@ -247,7 +237,6 @@ config MACH_COLIBRI_PXA270_INCOME
        depends on MACH_COLIBRI
        select PXA27x
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_COLIBRI300
        bool "Toradex Colibri PXA300/310"
@@ -274,7 +263,6 @@ config MACH_H4700
        select PXA27x
        select IWMMXT
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_H5000
        bool "HP iPAQ h5000"
@@ -289,7 +277,6 @@ config MACH_MAGICIAN
        select PXA27x
        select IWMMXT
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_MIOA701
        bool "Mitac Mio A701 Support"
@@ -307,7 +294,6 @@ config PXA_EZX
        select PXA27x
        select IWMMXT
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
        bool "Motorola EZX A780"
@@ -478,7 +464,6 @@ config MACH_POODLE
        depends on PXA_SHARPSL
        select PXA25x
        select SHARP_LOCOMO
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
        bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -523,7 +508,6 @@ config MACH_TOSA
        bool "Enable Sharp SL-6000x (Tosa) Support"
        depends on PXA_SHARPSL
        select PXA25x
-       select PXA_HAVE_BOARD_IRQS
 
 config TOSA_BT
        tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
@@ -552,7 +536,6 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
        bool "PXA based Toshiba e-series PDAs"
        select PXA25x
-       select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
        bool "Toshiba e330"
@@ -606,7 +589,6 @@ config MACH_ZIPIT2
        bool "Zipit Z2 Handheld"
        select PXA27x
        select HAVE_PWM
-       select PXA_HAVE_BOARD_IRQS
 
 endmenu
 
@@ -693,9 +675,6 @@ config SHARPSL_PM_MAX1111
        select HWMON
        select SENSORS_MAX1111
 
-config PXA_HAVE_BOARD_IRQS
-       bool
-
 config PXA_HAVE_ISA_IRQS
        bool
 

diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 9041340fee1db17cdb6aa670ba43a2457a8193bf..2b81e64beb42609ac67cf331e4c9e8b10b328436 100644 (file)
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -779,6 +779,7 @@ MACHINE_START(BALLOON3, "Balloon3")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = balloon3_map_io,
+       .nr_irqs        = BALLOON3_NR_IRQS,
        .init_irq       = balloon3_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = balloon3_init,

diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index bff6e78f033d250d803c9a9bc82474ac3804b317..ad40e7b141e0efb554490c940dc51fb226096d68 100644 (file)
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -33,6 +33,9 @@
 extern void cmx255_init(void);
 extern void cmx270_init(void);
 
+/* reserve IRQs for IT8152 */
+#define CMX2XX_NR_IRQS         (IRQ_BOARD_START + 40)
+
 /* virtual addresses for statically mapped regions */
 #define CMX2XX_VIRT_BASE       (0xe8000000)
 #define CMX2XX_IT8152_VIRT     (CMX2XX_VIRT_BASE)
@@ -514,6 +517,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = cmx2xx_map_io,
+       .nr_irqs        = CMX2XX_NR_IRQS,
        .init_irq       = cmx2xx_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = cmx2xx_init,

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 349212a1cbd3ab741a60412c431ab43fd1b17330..4971ce119501566a552c4398eca6d52726aeefe5 100644 (file)
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -29,6 +29,7 @@
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/eseries-irq.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/udc.h>
@@ -183,6 +184,7 @@ MACHINE_START(E330, "Toshiba e330")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e330_init,
@@ -233,6 +235,7 @@ MACHINE_START(E350, "Toshiba e350")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e350_init,
@@ -356,6 +359,7 @@ MACHINE_START(E400, "Toshiba e400")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e400_init,
@@ -545,6 +549,7 @@ MACHINE_START(E740, "Toshiba e740")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e740_init,
@@ -737,6 +742,7 @@ MACHINE_START(E750, "Toshiba e750")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e750_init,
@@ -933,6 +939,7 @@ MACHINE_START(E800, "Toshiba e800")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ESERIES_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .fixup          = eseries_fixup,
        .init_machine   = e800_init,

diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 626c82b1397031bef376ddf1acbfd5feb8a9fe41..3fe61f4ac790d01533691fca12e1ce4c14bdffae 100644 (file)
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -38,6 +38,8 @@
 #include "devices.h"
 #include "generic.h"
 
+#define EZX_NR_IRQS                    (IRQ_BOARD_START + 24)
+
 #define GPIO12_A780_FLIP_LID           12
 #define GPIO15_A1200_FLIP_LID          15
 #define GPIO15_A910_FLIP_LID           15
@@ -800,6 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = a780_init,
@@ -866,6 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = e680_init,
@@ -932,6 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = a1200_init,
@@ -1124,6 +1129,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = a910_init,
@@ -1190,6 +1196,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = e6_init,
@@ -1230,6 +1237,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = pxa_map_io,
+       .nr_irqs        = EZX_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = e2_init,

diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 848c861dd23f20acbbd121d32a9e0721acbee45c..10104f16e6e42474bbc82a9ef330df45f08d7ac5 100644 (file)
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -874,6 +874,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
        .io_pg_offst  = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params  = 0xa0000100,
        .map_io       = pxa_map_io,
+       .nr_irqs      = HX4700_NR_IRQS,
        .init_irq     = pxa27x_init_irq,
        .init_machine = hx4700_init,
        .timer        = &pxa_timer,

diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index eec92e6fd7cf804f3ba611325cdbc491da3dcf96..561562b4360b7b22477373c8d7fab7a6eb715478 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -174,6 +174,8 @@ enum balloon3_features {
 #define BALLOON3_CODEC_IRQ     IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ     IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
+#define BALLOON3_NR_IRQS       (IRQ_BOARD_START + 4)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif

diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
index f2a93d5e31d303034074425b2735e71f37227bf1..de292b269c63ead3a54c29acc920d5cab1786582 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/eseries-irq.h
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -25,3 +25,4 @@
 #define TMIO_SD_IRQ     IRQ_TMIO(1)
 #define TMIO_USB_IRQ    IRQ_TMIO(2)
 
+#define ESERIES_NR_IRQS        (IRQ_BOARD_START + 16)

diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 9eaeed1f87f1fad6f8754dfa736473ecf113f33a..37408449ec25e023264ae8852fc3bec9feb381a6 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -17,6 +17,7 @@
 
 #define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
 #define HX4700_EGPIO_BASE      (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
+#define HX4700_NR_IRQS         (IRQ_BOARD_START + 70)
 
 /*
  * PXA GPIOs

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index ffc8314520f2e109b5db96bfebdfb97096f90d90..d372caa75dc737d4ca51f4ddcc34c64ac530bd43 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -117,48 +117,12 @@
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
- * these.  There will be 16 IRQs by default.  If it is not enough,
- * IRQ_BOARD_END is allowed be customized for each board, but keep
- * the numbers within sensible limits and in descending order, so
- * when multiple config options are selected, the maximum will be
- * used.
+ * these.
+ * By default, no board IRQ is reserved. It should be finished in
+ * custom board since sparse IRQ is already enabled.
  */
 #define IRQ_BOARD_START                (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
 
-#if defined(CONFIG_MACH_H4700)
-#define IRQ_BOARD_END          (IRQ_BOARD_START + 70)
-#elif defined(CONFIG_MACH_ZYLONITE)
-#define IRQ_BOARD_END          (IRQ_BOARD_START + 32)
-#elif defined(CONFIG_PXA_EZX)
-#define IRQ_BOARD_END          (IRQ_BOARD_START + 23)
-#else
-#define IRQ_BOARD_END          (IRQ_BOARD_START + 16)
-#endif
-
-/*
- * Figure out the MAX IRQ number.
- *
- * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
- * Otherwise, we have the standard IRQs only.
- */
-#ifdef CONFIG_SA1111
-#define NR_IRQS                        (IRQ_BOARD_END + 55)
-#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
-#define NR_IRQS                        (IRQ_BOARD_END)
-#else
 #define NR_IRQS                        (IRQ_BOARD_START)
-#endif
-
-/* add IT8152 IRQs beyond BOARD_END */
-#ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
-
-#if NR_IRQS < (IT8152_LAST_IRQ+1)
-#undef NR_IRQS
-#define NR_IRQS (IT8152_LAST_IRQ+1)
-#endif
-
-#endif /* CONFIG_PCI_HOST_ITE8152 */
 
 #endif /* __ASM_MACH_IRQS_H */

diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 6c9b21c5132254dad261aa1dba4097293248684d..2a5726c15e0e446f855f857d4e773a6785ba8486 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -10,4 +10,6 @@
 #define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
 #define EXT0_GPIO(x)   (EXT0_GPIO_BASE + (x))
 
+#define LITTLETON_NR_IRQS      (IRQ_BOARD_START + 8)
+
 #endif /* __ASM_ARCH_LITTLETON_H */

diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index 0e6440c81683d0c18548bdd863016fa9444fe64e..cd070092b6eb708b1397fa82ba3e2e05b6104bf0 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -38,5 +38,6 @@
 #define LPD270_USBC_IRQ                LPD270_IRQ(2)
 #define LPD270_ETHERNET_IRQ    LPD270_IRQ(3)
 #define LPD270_AC97_IRQ                LPD270_IRQ(4)
+#define LPD270_NR_IRQS         (IRQ_BOARD_START + 5)
 
 #endif

diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index a0d4247f08fc56aedcb845bb1c8403d64f64d11b..2a086e8373eb7bf1104892784aba7a5236a3bd5b 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -45,6 +45,9 @@
 #define LUBBOCK_USB_DISC_IRQ   LUBBOCK_IRQ(6)  /* usb disconnect */
 #define LUBBOCK_LAST_IRQ       LUBBOCK_IRQ(6)
 
+#define LUBBOCK_SA1111_IRQ_BASE        (IRQ_BOARD_START + 16)
+#define LUBBOCK_NR_IRQS                (IRQ_BOARD_START + 16 + 55)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif

diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 20ef37d4a9a75b2567e73791d1ba8ee5056ae563..0a2efcf7947c5c4da26e7140f4256387f3387769 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -71,6 +71,8 @@
 #define IRQ_MAGICIAN_BT                (IRQ_BOARD_START + 2)
 #define IRQ_MAGICIAN_VBUS      (IRQ_BOARD_START + 3)
 
+#define MAGICIAN_NR_IRQS       (IRQ_BOARD_START + 8)
+
 /*
  * CPLD EGPIOs
  */

diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 86e623abd64d6404e3d39848d5fee8b1a50682d4..4c2d11cd824dda4415d1ad74af1a368ffdd9b439 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -134,4 +134,6 @@
 #define MAINSTONE_S1_STSCHG_IRQ        MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ       MAINSTONE_IRQ(15)
 
+#define MAINSTONE_NR_IRQS      (IRQ_BOARD_START + 16)
+
 #endif

diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 04083263167ed5ad0ab84a014cc14420c4175ffd..4bac588478a898ee6dae6107a9cd44fc7d365c69 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -30,6 +30,8 @@
 #define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
 #define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
 
+#define PCM027_NR_IRQS         (IRQ_BOARD_START + 32)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO    0
 #define PCM027_RTC_IRQ         IRQ_GPIO(PCM027_RTC_IRQ_GPIO)

diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 0b3e6d051c6425d86238473ab31f25702cd29c92..83d1cfd00fc9f7d05e75c4a0c94383c479407179 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -85,6 +85,8 @@
 #define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
 #define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
 
+#define POODLE_NR_IRQS         (IRQ_BOARD_START + 4)   /* 4 for LoCoMo */
+
 extern struct platform_device poodle_locomo_device;
 
 #endif /* __ASM_ARCH_POODLE_H  */

diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1bbd1f2e4beb3065ff75d4204d375ac88dc10847..1272c4b56ceb8de05875e75310df11b86b377982 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -20,6 +20,7 @@
 /* Jacket Scoop */
 #define TOSA_SCOOP_PHYS        (PXA_CS5_PHYS + 0x00800000)
 
+#define TOSA_NR_IRQS           (IRQ_BOARD_START + TC6393XB_NR_IRQS)
 /*
  * SCOOP2 internal GPIOs
  */

diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index 6e119976003e72979af443fb07e2b82c9441f74f..faa408ab7ad72f38c6951849008c86397b866c99 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -15,6 +15,8 @@
 #ifndef _MACH_ZEUS_H
 #define _MACH_ZEUS_H
 
+#define ZEUS_NR_IRQS           (IRQ_BOARD_START + 48)
+
 /* Physical addresses */
 #define ZEUS_FLASH_PHYS                PXA_CS0_PHYS
 #define ZEUS_ETH0_PHYS         PXA_CS1_PHYS

diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index 9edf645368d65989376ca144a2d49a1fbc2d0f74..ea24998b923c27aed8b13d7aa091368b2f47a7ef 100644 (file)
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -5,6 +5,8 @@
 
 #define EXT_GPIO(x)            (128 + (x))
 
+#define ZYLONITE_NR_IRQS       (IRQ_BOARD_START + 32)
+
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */

diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9b9046185b00e3e8c2c7e47b13fd37c478f74640..83f3236893b39151a55c9c0044f17f4e6fb1f859 100644 (file)
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
        .boot_params    = 0xa0000100,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = pxa_map_io,
+       .nr_irqs        = LITTLETON_NR_IRQS,
        .init_irq       = pxa3xx_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = littleton_init,

diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d279507fc748275dfff6670544699cf6464eee7f..fc9502ef40240426a86bb61f364b71f9eaebd61e 100644 (file)
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -509,6 +509,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params    = 0xa0000100,
        .map_io         = lpd270_map_io,
+       .nr_irqs        = LPD270_NR_IRQS,
        .init_irq       = lpd270_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = lpd270_init,

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 330c3282856e620ec879563e16655c6d56d6d2a9..1956c23093d18a68c30340f2b9f9d6dfb1621f73 100644 (file)
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -229,7 +229,7 @@ static struct resource sa1111_resources[] = {
 };
 
 static struct sa1111_platform_data sa1111_info = {
-       .irq_base       = IRQ_BOARD_END,
+       .irq_base       = LUBBOCK_SA1111_IRQ_BASE,
 };
 
 static struct platform_device sa1111_device = {
@@ -560,6 +560,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = lubbock_map_io,
+       .nr_irqs        = LUBBOCK_NR_IRQS,
        .init_irq       = lubbock_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = lubbock_init,

diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e81dd0c8e40dcced02770cb7dc57c4ca4634102b..42a0c2b41281118e108354e0ffb0f5366510defa 100644 (file)
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -768,6 +768,7 @@ MACHINE_START(MAGICIAN, "HTC Magician")
        .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .boot_params = 0xa0000100,
        .map_io = pxa_map_io,
+       .nr_irqs = MAGICIAN_NR_IRQS,
        .init_irq = pxa27x_init_irq,
        .init_machine = magician_init,
        .timer = &pxa_timer,

diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 5543c64da9efbaedf903d8eaff3904616f90bd7e..c2a8717e463d446688c7ef4736db77e283fe00cb 100644 (file)
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -628,6 +628,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
        .boot_params    = 0xa0000100,   /* BLOB boot parameter setting */
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = mainstone_map_io,
+       .nr_irqs        = MAINSTONE_NR_IRQS,
        .init_irq       = mainstone_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = mainstone_init,

diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 2190af066470e546a151293801f75b2311ed474c..90b08ba8ad1a55a445caffd4c0f93351c3e4f023 100644 (file)
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
        .phys_io        = 0x40000000,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = pcm027_map_io,
+       .nr_irqs        = PCM027_NR_IRQS,
        .init_irq       = pxa27x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = pcm027_init,

diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 55e8fcde0141df75dccd32b49c6a452e4f2daaea..c04e025cd790875dc3dd8eb43114f943df28a5f4 100644 (file)
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -469,6 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .fixup          = fixup_poodle,
        .map_io         = pxa_map_io,
+       .nr_irqs        = POODLE_NR_IRQS,       /* 4 for LoCoMo */
        .init_irq       = pxa25x_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = poodle_init,

diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index a654d1e6b38ad11eb6420667028c8395ab10c1ae..62de07341cc62d2177dbd764d8ff8458eec3d07b 100644 (file)
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -56,6 +56,8 @@
 #include "devices.h"
 #include "generic.h"
 
+#define STARGATE_NR_IRQS       (IRQ_BOARD_START + 8)
+
 /* Bluetooth */
 #define SG2_BT_RESET           81
 
@@ -1011,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2")
        .phys_io = 0x40000000,
        .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io = pxa_map_io,
+       .nr_irqs = STARGATE_NR_IRQS,
        .init_irq = pxa27x_init_irq,
        .timer = &pxa_timer,
        .init_machine = stargate2_init,

diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 83cc3a18c2e9a0ded180a0b223f29167b3a290f7..3a06e98b49209282f924932397ea5c30d65232be 100644 (file)
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -956,6 +956,7 @@ MACHINE_START(TOSA, "SHARP Tosa")
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .fixup          = fixup_tosa,
        .map_io         = pxa_map_io,
+       .nr_irqs        = TOSA_NR_IRQS,
        .init_irq       = pxa25x_init_irq,
        .init_machine   = tosa_init,
        .timer          = &pxa_timer,

diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 03b9cb910e085b1911465e77d57a12ac11a71c9f..9da2b624ba2093dd52de018bdde9da28b3084fc3 100644 (file)
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,6 +904,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
        .io_pg_offst    = ((io_p2v(0x40000000) >> 18) & 0xfffc),
        .boot_params    = 0xa0000100,
        .map_io         = zeus_map_io,
+       .nr_irqs        = ZEUS_NR_IRQS,
        .init_irq       = zeus_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = zeus_init,

diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index c479cbecf784ac3c53f634d2b4fad3e1fefd4daa..2edad61539a818cd337b20b6174a6ca1d8c2a881 100644 (file)
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -415,6 +415,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
        .boot_params    = 0xa0000100,
        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
        .map_io         = pxa_map_io,
+       .nr_irqs        = ZYLONITE_NR_IRQS,
        .init_irq       = pxa3xx_init_irq,
        .timer          = &pxa_timer,
        .init_machine   = zylonite_init,