--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pnp.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include "lirc_ene0100.h"
+
+
+static int sample_period = -1;
+static int enable_idle = 1;
+static int enable_duty_carrier;
+static int input = 1;
+static int debug;
+static int txsim;
+
+static void ene_rx_set_idle(struct ene_device *dev, int idle);
+static int ene_irq_status(struct ene_device *dev);
+static void ene_send_sample(struct ene_device *dev, unsigned long sample);
+
+/* read a hardware register */
+static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
+{
+ u8 retval;
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ retval = inb(dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x == %02x", reg, retval);
+ return retval;
+}
+
+/* write a hardware register */
+static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
+{
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+ outb(value, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x", reg, value);
+}
+
+/* change specific bits in hardware register */
+static void ene_hw_write_reg_mask(struct ene_device *dev,
+ u16 reg, u8 value, u8 mask)
+{
+ u8 regvalue;
+
+ outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
+ outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
+
+ regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
+ regvalue |= (value & mask);
+ outb(regvalue, dev->hw_io + ENE_IO);
+
+ ene_dbg_verbose("reg %04x <- %02x (mask=%02x)", reg, value, mask);
+}
+
+/* detect hardware features */
+static int ene_hw_detect(struct ene_device *dev)
+{
+ u8 chip_major, chip_minor;
+ u8 hw_revision, old_ver;
+ u8 tmp;
+ u8 fw_capabilities;
+
+ tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
+
+ chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
+ chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
+
+ ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
+ hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
+ old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
+
+ if (hw_revision == 0xFF) {
+
+ ene_printk(KERN_WARNING, "device seems to be disabled\n");
+ ene_printk(KERN_WARNING,
+ "send a mail to lirc-list@lists.sourceforge.net\n");
+ ene_printk(KERN_WARNING, "please attach output of acpidump\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x33) {
+ ene_printk(KERN_WARNING, "chips 0x33xx aren't supported\n");
+ return -ENODEV;
+ }
+
+ if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_C;
+ } else if (old_ver == 0x24 && hw_revision == 0xC0) {
+ dev->hw_revision = ENE_HW_B;
+ ene_printk(KERN_NOTICE, "KB3926B detected\n");
+ } else {
+ dev->hw_revision = ENE_HW_D;
+ ene_printk(KERN_WARNING,
+ "unknown ENE chip detected, assuming KB3926D\n");
+ ene_printk(KERN_WARNING,
+ "driver support might be not complete");
+
+ }
+
+ ene_printk(KERN_DEBUG,
+ "chip is 0x%02x%02x - kbver = 0x%02x, rev = 0x%02x\n",
+ chip_major, chip_minor, old_ver, hw_revision);
+
+ /* detect features hardware supports */
+ if (dev->hw_revision < ENE_HW_C)
+ return 0;
+
+ fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
+ ene_dbg("Firmware capabilities: %02x", fw_capabilities);
+
+ dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
+ dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
+
+ dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
+ (fw_capabilities & ENE_FW2_FAN_AS_NRML_IN);
+
+ ene_printk(KERN_NOTICE, "hardware features:\n");
+ ene_printk(KERN_NOTICE,
+ "learning and transmit %s, gpio40_learn %s, fan_in %s\n",
+ dev->hw_learning_and_tx_capable ? "on" : "off",
+ dev->hw_gpio40_learning ? "on" : "off",
+ dev->hw_fan_as_normal_input ? "on" : "off");
+
+ if (dev->hw_learning_and_tx_capable) {
+ ene_printk(KERN_WARNING,
+ "Device supports transmitting, but that support is\n");
+ ene_printk(KERN_WARNING,
+ "lightly tested. Please test it and mail\n");
+ ene_printk(KERN_WARNING,
+ "lirc-list@lists.sourceforge.net\n");
+ }
+ return 0;
+}
+
+/* this enables/disables IR input via gpio40*/
+static void ene_enable_gpio40_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, enable ?
+ 0 : ENE_CIR_CONF2_GPIO40DIS,
+ ENE_CIR_CONF2_GPIO40DIS);
+}
+
+/* this enables/disables IR via standard input */
+static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_RX_ON : 0);
+}
+
+/* this enables/disables IR input via unused fan tachtometer input */
+static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
+{
+ if (!enable)
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
+ else {
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
+ ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
+ }
+ dev->rx_fan_input_inuse = enable;
+}
+
+
+/* Sense current recieved carrier */
+static int ene_rx_sense_carrier(struct ene_device *dev)
+{
+ int period = ene_hw_read_reg(dev, ENE_RX_CARRIER);
+ int carrier;
+ ene_dbg("RX: hardware carrier period = %02x", period);
+
+ if (!(period & ENE_RX_CARRIER_VALID))
+ return 0;
+
+ period &= ~ENE_RX_CARRIER_VALID;
+
+ if (!period)
+ return 0;
+
+ carrier = 2000000 / period;
+ ene_dbg("RX: sensed carrier = %d Hz", carrier);
+ return carrier;
+}
+
+/* determine which input to use*/
+static void ene_rx_set_inputs(struct ene_device *dev)
+{
+ int learning_mode = dev->learning_enabled || dev->rx_carrier_sense;
+
+ ene_dbg("RX: setup reciever, learning mode = %d", learning_mode);
+
+ ene_enable_normal_recieve(dev, 1);
+
+ /* old hardware doesn't support learning mode for sure */
+ if (dev->hw_revision <= ENE_HW_B)
+ return;
+
+ /* reciever not learning capable, still set gpio40 correctly */
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_enable_gpio40_recieve(dev, !dev->hw_gpio40_learning);
+ return;
+ }
+
+ /* enable learning mode */
+ if (learning_mode) {
+ ene_enable_gpio40_recieve(dev, dev->hw_gpio40_learning);
+
+ /* fan input is not used for learning */
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable learning mode */
+ } else {
+ if (dev->hw_fan_as_normal_input) {
+ ene_enable_fan_recieve(dev, 1);
+ ene_enable_normal_recieve(dev, 0);
+ } else
+ ene_enable_gpio40_recieve(dev,
+ !dev->hw_gpio40_learning);
+ }
+
+ /* set few additional settings for this mode */
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_mode ?
+ ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_mode ?
+ ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
+}
+
+/* Enable the device for receive */
+static void ene_rx_enable(struct ene_device *dev)
+{
+ u8 reg_value;
+
+ if (dev->hw_revision < ENE_HW_C) {
+ ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
+ ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
+ } else {
+ reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
+ reg_value |= ENEC_IRQ_UNK_EN;
+ reg_value &= ~ENEC_IRQ_STATUS;
+ reg_value |= (dev->irq & ENEC_IRQ_MASK);
+ ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
+ ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
+ }
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
+ ene_rx_set_inputs(dev);
+
+ /* set sampling period */
+ ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
+
+ /* ack any pending irqs - just in case */
+ ene_irq_status(dev);
+
+ /* enter idle mode */
+ ene_rx_set_idle(dev, 1);
+
+ /* enable firmware bits */
+ ene_hw_write_reg_mask(dev, ENE_FW1,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ,
+ ENE_FW1_ENABLE | ENE_FW1_IRQ);
+}
+
+/* Disable the device reciever */
+static void ene_rx_disable(struct ene_device *dev)
+{
+ /* disable inputs */
+ ene_enable_normal_recieve(dev, 0);
+
+ if (dev->hw_fan_as_normal_input)
+ ene_enable_fan_recieve(dev, 0);
+
+ /* disable hardware IRQ and firmware flag */
+ ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
+
+ ene_rx_set_idle(dev, 1);
+}
+
+/* send current sample to the user */
+static void ene_rx_flush(struct ene_device *dev, int timeout)
+{
+ unsigned long value;
+
+ value = dev->rx_sample_pulse ? LIRC_PULSE(dev->rx_sample) :
+ LIRC_SPACE(dev->rx_sample);
+ ene_send_sample(dev, value);
+ dev->rx_sample = 0;
+ dev->rx_sample_pulse = 0;
+}
+
+/* recieve new sample and process it */
+static void ene_rx_sample(struct ene_device *dev, int sample, int is_pulse)
+{
+ ene_dbg("RX: sample %8d (%s)", sample, is_pulse ? "pulse" : "space");
+
+ /* ignore spaces in idle mode, can get them on revC */
+ /* also ignore a space in front of first pulse */
+ if (dev->rx_idle && !is_pulse)
+ return;
+
+ /* get out of idle mode now */
+ if (dev->rx_idle)
+ ene_rx_set_idle(dev, 0);
+
+ if (!dev->rx_sample) {
+ dev->rx_sample = sample;
+ dev->rx_sample_pulse = is_pulse;
+ } else if (is_pulse == dev->rx_sample_pulse)
+ dev->rx_sample += sample;
+ else {
+ ene_rx_flush(dev, 0);
+ dev->rx_sample = sample;
+ dev->rx_sample_pulse = is_pulse;
+ }
+
+ if (is_pulse)
+ return;
+
+ /* overflow sample from fan input recieved, enable idle mode */
+ if (dev->rx_fan_input_inuse &&
+ sample == ENE_FAN_VALUE_MASK * ENE_SAMPLE_PERIOD_FAN) {
+ ene_rx_set_idle(dev, 1);
+ return;
+ }
+
+ if (!dev->rx_fan_input_inuse) {
+ /* Report timeout if enabled */
+ if (dev->rx_timeout && dev->rx_send_timeout_packet &&
+ !dev->rx_timeout_sent &&
+ dev->rx_sample > dev->rx_timeout) {
+ ene_dbg("RX: sending timeout sample");
+ ene_send_sample(dev, LIRC_TIMEOUT(dev->rx_sample));
+ dev->rx_timeout_sent = 1;
+ }
+
+ /* too large sample accumulated via normal input.
+ note that on revC, hardware idle mode turns on automaticly,
+ so max gap should be less that the gap after which
+ hw stops sending samples */
+ if (dev->rx_sample > ENE_MAXGAP) {
+ ene_rx_set_idle(dev, 1);
+ return;
+ }
+ }
+}
+
+/* enable or disable idle mode */
+static void ene_rx_set_idle(struct ene_device *dev, int idle)
+{
+ struct timeval now;
+ int disable_sampler = 0;
+
+
+ /* Also put hardware sampler in 'idle' mode on revB*/
+ /* revC and higher do that automaticly (firmware does?) */
+ if ((dev->hw_revision < ENE_HW_C) && enable_idle)
+ if (idle)
+ disable_sampler = 1;
+
+ ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
+ disable_sampler ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
+ ENE_CIR_SAMPLE_OVERFLOW);
+ dev->rx_idle = idle;
+
+ /* remember when we have entered the idle mode */
+ if (idle) {
+ ene_dbg("RX: going into idle mode");
+ do_gettimeofday(&dev->rx_gap_start);
+ return;
+ }
+
+ ene_dbg("RX: back from idle mode");
+
+ /* send the gap between keypresses now */
+ do_gettimeofday(&now);
+
+ if (dev->rx_sample_pulse) {
+ ene_dbg("RX: somehow we recieved a pulse before idle mode???");
+ return;
+ }
+
+ /* manually calculate and recieve the gap between keypresses */
+ if (now.tv_sec - dev->rx_gap_start.tv_sec > 16)
+ dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+ else
+ dev->rx_sample +=
+ 1000000ull * (now.tv_sec - dev->rx_gap_start.tv_sec)
+ + now.tv_usec - dev->rx_gap_start.tv_usec;
+
+ if (dev->rx_sample > LIRC_SPACE(LIRC_VALUE_MASK))
+ dev->rx_sample = LIRC_SPACE(LIRC_VALUE_MASK);
+
+ ene_rx_flush(dev, 0);
+ dev->rx_timeout_sent = 0;
+}
+
+/* prepare transmission */
+static void ene_tx_prepare(struct ene_device *dev)
+{
+ u8 conf1;
+
+ conf1 = ene_hw_read_reg(dev, ENE_CIR_CONF1);
+ dev->saved_conf1 = conf1;
+
+ if (dev->hw_revision == ENE_HW_C)
+ conf1 &= ~ENE_CIR_CONF1_TX_CLEAR;
+
+ /* Enable TX engine */
+ conf1 |= ENE_CIR_CONF1_TX_ON;
+
+ /* Set carrier */
+ if (dev->tx_period) {
+
+ int tx_period_in500ns = dev->tx_period * 2;
+
+ int tx_pulse_width_in_500ns =
+ tx_period_in500ns / (100 / dev->tx_duty_cycle);
+
+ if (!tx_pulse_width_in_500ns)
+ tx_pulse_width_in_500ns = 1;
+
+ ene_dbg("TX: pulse distance = %d * 500 ns", tx_period_in500ns);
+ ene_dbg("TX: pulse width = %d * 500 ns",
+ tx_pulse_width_in_500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD, ENE_TX_PERIOD_UNKBIT |
+ tx_period_in500ns);
+
+ ene_hw_write_reg(dev, ENE_TX_PERIOD_PULSE,
+ tx_pulse_width_in_500ns);
+
+ conf1 |= ENE_CIR_CONF1_TX_CARR;
+ } else
+ conf1 &= ~ENE_CIR_CONF1_TX_CARR;
+
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, conf1);
+ dev->tx_underway = 1;
+
+}
+
+/* end transmission */
+static void ene_tx_complete(struct ene_device *dev)
+{
+ ene_hw_write_reg(dev, ENE_CIR_CONF1, dev->saved_conf1);
+ dev->tx_underway = 0;
+}
+
+/* set transmit mask */
+static void ene_tx_set_transmiter_mask(struct ene_device *dev)
+{
+ u8 txport1 = ene_hw_read_reg(dev, ENE_TX_PORT1) & ~ENE_TX_PORT1_EN;
+ u8 txport2 = ene_hw_read_reg(dev, ENE_TX_PORT2) & ~ENE_TX_PORT2_EN;
+
+ if (dev->transmitter_mask & 0x01)
+ txport1 |= ENE_TX_PORT1_EN;
+
+ if (dev->transmitter_mask & 0x02)
+ txport2 |= ENE_TX_PORT2_EN;
+
+ ene_hw_write_reg(dev, ENE_TX_PORT1, txport1);
+ ene_hw_write_reg(dev, ENE_TX_PORT2, txport2);
+}
+
+/* TX one sample - must be called with dev->hw_lock*/
+static void ene_tx_sample(struct ene_device *dev)
+{
+ u8 raw_tx;
+ u32 sample;
+
+ if (!dev->tx_underway) {
+ ene_dbg("TX: attempt to transmit while hw isn't setup");
+ return;
+ }
+
+ /* Grab next TX sample */
+ if (!dev->tx_sample) {
+again:
+ if (dev->tx_pos == dev->tx_len + 1) {
+ if (!dev->tx_done) {
+ ene_dbg("TX: no more data to send");
+ dev->tx_done = 1;
+ goto exit;
+ } else {
+ ene_dbg("TX: last sample sent by hardware");
+ ene_tx_complete(dev);
+ complete(&dev->tx_complete);
+ return;
+ }
+ }
+
+ sample = dev->tx_buffer[dev->tx_pos++];
+ dev->tx_sample_pulse = !dev->tx_sample_pulse;
+
+ ene_dbg("TX: sample %8d (%s)", sample, dev->tx_sample_pulse ?
+ "pulse" : "space");
+
+ dev->tx_sample = DIV_ROUND_CLOSEST(sample, ENE_TX_SMPL_PERIOD);
+
+ /* guard against too short samples */
+ if (!dev->tx_sample)
+ goto again;
+ }
+
+ raw_tx = min(dev->tx_sample , (unsigned int)ENE_TX_SMLP_MASK);
+ dev->tx_sample -= raw_tx;
+
+ if (dev->tx_sample_pulse)
+ raw_tx |= ENE_TX_PULSE_MASK;
+
+ ene_hw_write_reg(dev, ENE_TX_INPUT1 + dev->tx_reg, raw_tx);
+ dev->tx_reg = !dev->tx_reg;
+exit:
+ /* simulate TX done interrupt */
+ if (txsim)
+ mod_timer(&dev->tx_sim_timer, jiffies + HZ / 500);
+}
+
+/* timer to simulate tx done interrupt */
+static void ene_tx_irqsim(unsigned long data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_sample(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+
+/* read irq status and ack it */
+static int ene_irq_status(struct ene_device *dev)
+{
+ u8 irq_status;
+ u8 fw_flags1, fw_flags2;
+ int cur_rx_pointer;
+ int retval = 0;
+
+ fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
+ cur_rx_pointer = !!(fw_flags2 & ENE_FW2_BUF_HIGH);
+
+ if (dev->hw_revision < ENE_HW_C) {
+ irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
+
+ if (!(irq_status & ENEB_IRQ_STATUS_IR))
+ return 0;
+
+ ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
+ irq_status & ~ENEB_IRQ_STATUS_IR);
+ dev->rx_pointer = cur_rx_pointer;
+ return ENE_IRQ_RX;
+ }
+
+ irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
+
+ if (!(irq_status & ENEC_IRQ_STATUS))
+ return 0;
+
+ /* original driver does that twice - a workaround ? */
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+ ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
+
+ /* clear unknown flag in F8F9 */
+ if (fw_flags2 & ENE_FW2_IRQ_CLR)
+ ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
+
+ /* check if this is a TX interrupt */
+ fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
+ if (fw_flags1 & ENE_FW1_TXIRQ) {
+ ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
+ retval |= ENE_IRQ_TX;
+ }
+
+ /* Check if this is RX interrupt */
+ if (dev->rx_pointer != cur_rx_pointer) {
+ retval |= ENE_IRQ_RX;
+ dev->rx_pointer = cur_rx_pointer;
+
+ } else if (!(retval & ENE_IRQ_TX)) {
+ ene_dbg("RX: interrupt without change in RX pointer(%d)",
+ dev->rx_pointer);
+ retval |= ENE_IRQ_RX;
+ }
+
+ if ((retval & ENE_IRQ_RX) && (retval & ENE_IRQ_TX))
+ ene_dbg("both RX and TX interrupt at same time");
+
+ return retval;
+}
+
+/* interrupt handler */
+static irqreturn_t ene_isr(int irq, void *data)
+{
+ u16 hw_value;
+ int i, hw_sample;
+ int pulse;
+ int irq_status;
+ unsigned long flags;
+ int carrier = 0;
+ irqreturn_t retval = IRQ_NONE;
+ struct ene_device *dev = (struct ene_device *)data;
+
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ irq_status = ene_irq_status(dev);
+
+ if (!irq_status)
+ goto unlock;
+
+ retval = IRQ_HANDLED;
+
+ if (irq_status & ENE_IRQ_TX) {
+
+ if (!dev->hw_learning_and_tx_capable) {
+ ene_dbg("TX interrupt on unsupported device!");
+ goto unlock;
+ }
+ ene_tx_sample(dev);
+ }
+
+ if (!(irq_status & ENE_IRQ_RX))
+ goto unlock;
+
+
+ if ((debug && dev->learning_enabled) || dev->rx_carrier_sense)
+ carrier = ene_rx_sense_carrier(dev);
+
+ if (dev->rx_carrier_sense && carrier)
+ ene_send_sample(dev, LIRC_FREQUENCY(carrier));
+
+
+ for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
+ hw_value = ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER + dev->rx_pointer * 4 + i);
+
+ if (dev->rx_fan_input_inuse) {
+ /* read high part of the sample */
+ hw_value |= ene_hw_read_reg(dev,
+ ENE_SAMPLE_BUFFER_FAN +
+ dev->rx_pointer * 4 + i) << 8;
+ pulse = hw_value & ENE_FAN_SMPL_PULS_MSK;
+
+ /* clear space bit, and other unused bits */
+ hw_value &= ENE_FAN_VALUE_MASK;
+ hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
+
+ } else {
+ pulse = !(hw_value & ENE_SAMPLE_SPC_MASK);
+ hw_value &= ENE_SAMPLE_VALUE_MASK;
+ hw_sample = hw_value * sample_period;
+ }
+ /* no more data */
+ if (!(hw_value))
+ break;
+
+ ene_rx_sample(dev, hw_sample, pulse);
+ }
+unlock:
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return retval;
+}
+
+/* Initialize default settings */
+static void ene_setup_settings(struct ene_device *dev)
+{
+ dev->rx_send_timeout_packet = 0;
+ dev->rx_timeout = ENE_MAXGAP;
+ dev->tx_period = 32;
+ dev->tx_duty_cycle = 25; /*%*/
+ dev->transmitter_mask = 3;
+
+ /* Force learning mode if (input == 2), otherwise
+ let user set it with LIRC_SET_REC_CARRIER */
+ dev->learning_enabled =
+ (input == 2 && dev->hw_learning_and_tx_capable);
+
+ /* Clear accumulated sample bufer */
+ dev->rx_sample = 0;
+ dev->rx_sample_pulse = 0;
+ dev->rx_pointer = -1;
+ dev->rx_carrier_sense = 0;
+
+}
+
+/* outside interface: called on first open*/
+static int ene_open(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->in_use = 1;
+ ene_setup_settings(dev);
+ ene_rx_enable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ return 0;
+}
+
+/* outside interface: called on device close*/
+static void ene_close(void *data)
+{
+ struct ene_device *dev = (struct ene_device *)data;
+ unsigned long flags;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_rx_disable(dev);
+ dev->in_use = 0;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+}
+
+/* outside interface for settings */
+static int ene_ioctl(struct inode *node, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int lvalue = 0, retval, tmp;
+ unsigned long flags;
+ struct ene_device *dev = lirc_get_pdata(file);
+
+
+ switch (cmd) {
+ case LIRC_SET_SEND_CARRIER:
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ case LIRC_SET_TRANSMITTER_MASK:
+ case LIRC_SET_MEASURE_CARRIER_MODE:
+ case LIRC_SET_REC_CARRIER:
+ /* All these aren't possible without this */
+ if (!dev->hw_learning_and_tx_capable)
+ return -ENOSYS;
+ /* Fall through */
+ case LIRC_SET_REC_TIMEOUT:
+ case LIRC_SET_REC_TIMEOUT_REPORTS:
+ retval = get_user(lvalue, (unsigned int *) arg);
+ if (retval)
+ return retval;
+ }
+
+ switch (cmd) {
+ case LIRC_SET_SEND_CARRIER:
+ ene_dbg("TX: attempt to set tx carrier to %d kHz", lvalue);
+ tmp = 1000000 / lvalue; /* (1 / freq) (* # usec in 1 sec) */
+
+ if (tmp && (tmp > ENE_TX_PERIOD_MAX ||
+ tmp < ENE_TX_PERIOD_MIN)) {
+
+ ene_dbg("TX: out of range %d-%d carrier, "
+ "falling back to 32 kHz",
+ 1000 / ENE_TX_PERIOD_MIN,
+ 1000 / ENE_TX_PERIOD_MAX);
+
+ tmp = 32; /* this is just a coincidence!!! */
+ }
+ ene_dbg("TX: set carrier to %d kHz", lvalue);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_period = tmp;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_SEND_DUTY_CYCLE:
+ ene_dbg("TX: attempt to set duty cycle to %d%%", lvalue);
+
+ if ((lvalue >= 100) || (lvalue <= 0)) {
+ retval = -EINVAL;
+ break;
+ }
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->tx_duty_cycle = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_TRANSMITTER_MASK:
+ ene_dbg("TX: attempt to set transmitter mask %02x", lvalue);
+
+ /* invalid txmask */
+ if (!lvalue || lvalue & ~0x3) {
+ ene_dbg("TX: invalid mask");
+ /* this supposed to return num of transmitters */
+ retval = 2;
+ break;
+ }
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->transmitter_mask = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_SET_REC_CARRIER:
+ tmp = (lvalue > ENE_NORMAL_RX_HI || lvalue < ENE_NORMAL_RX_LOW);
+
+ if (tmp != dev->learning_enabled) {
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->learning_enabled = tmp;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ }
+ break;
+ case LIRC_SET_REC_TIMEOUT:
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_timeout = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ ene_dbg("RX: set rx report timeout to %d", dev->rx_timeout);
+ break;
+ case LIRC_SET_REC_TIMEOUT_REPORTS:
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_send_timeout_packet = lvalue;
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ ene_dbg("RX: %sable timeout reports",
+ dev->rx_send_timeout_packet ? "en" : "dis");
+ break;
+ case LIRC_SET_MEASURE_CARRIER_MODE:
+ if (dev->rx_carrier_sense == lvalue)
+ break;
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ dev->rx_carrier_sense = lvalue;
+ ene_rx_set_inputs(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ break;
+ case LIRC_GET_REC_RESOLUTION:
+ tmp = dev->rx_fan_input_inuse ?
+ ENE_SAMPLE_PERIOD_FAN : sample_period;
+ retval = put_user(tmp, (unsigned long *) arg);
+ break;
+ default:
+ retval = -ENOIOCTLCMD;
+ break;
+ }
+
+ return retval;
+}
+
+/* outside interface: transmit */
+static ssize_t ene_transmit(struct file *file, const char *buf,
+ size_t n, loff_t *ppos)
+{
+ struct ene_device *dev = lirc_get_pdata(file);
+ unsigned long flags;
+
+ if (!dev)
+ return -EFAULT;
+
+ if (!dev->hw_learning_and_tx_capable)
+ return -ENODEV;
+
+ if (n % sizeof(int))
+ return -EINVAL;
+
+ if (n > ENE_TXBUF_SIZE * sizeof(int))
+ return -ENOMEM;
+
+ if (copy_from_user(dev->tx_buffer, buf, n))
+ return -EFAULT;
+
+ dev->tx_len = n / sizeof(int);
+ dev->tx_pos = 0;
+ dev->tx_reg = 0;
+ dev->tx_done = 0;
+ dev->tx_sample = 0;
+ dev->tx_sample_pulse = 0;
+
+ ene_dbg("TX: %d samples", dev->tx_len);
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+
+ ene_tx_set_transmiter_mask(dev);
+ ene_tx_prepare(dev);
+
+ /* Transmit first two samples */
+ ene_tx_sample(dev);
+ ene_tx_sample(dev);
+
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ if (wait_for_completion_timeout(&dev->tx_complete, 2 * HZ) == 0) {
+ ene_dbg("TX: timeout");
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_tx_complete(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+ } else
+ ene_dbg("TX: done");
+
+ return n;
+}
+
+/* Sends one sample to the user */
+static void ene_send_sample(struct ene_device *dev, unsigned long sample)
+{
+ if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
+ lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&sample);
+ wake_up(&dev->lirc_driver->rbuf->wait_poll);
+ }
+}
+
+
+static const struct file_operations ene_fops = {
+ .owner = THIS_MODULE,
+ .write = ene_transmit,
+ .ioctl = ene_ioctl,
+};
+
+/* main load function */
+static int ene_probe(struct pnp_dev *pnp_dev,
+ const struct pnp_device_id *dev_id)
+{
+ struct ene_device *dev;
+ struct lirc_driver *lirc_driver;
+ int error = -ENOMEM;
+
+ dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
+
+ if (!dev)
+ goto err1;
+
+ dev->pnp_dev = pnp_dev;
+ pnp_set_drvdata(pnp_dev, dev);
+
+ /* prepare lirc interface */
+ error = -ENOMEM;
+ lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
+
+ if (!lirc_driver)
+ goto err2;
+
+ dev->lirc_driver = lirc_driver;
+
+ strcpy(lirc_driver->name, ENE_DRIVER_NAME);
+ lirc_driver->minor = -1;
+ lirc_driver->code_length = sizeof(int) * 8;
+ lirc_driver->features = LIRC_CAN_REC_MODE2 |
+ LIRC_CAN_GET_REC_RESOLUTION |
+ LIRC_CAN_SET_REC_TIMEOUT;
+ lirc_driver->data = dev;
+ lirc_driver->set_use_inc = ene_open;
+ lirc_driver->set_use_dec = ene_close;
+ lirc_driver->dev = &pnp_dev->dev;
+ lirc_driver->owner = THIS_MODULE;
+ lirc_driver->fops = &ene_fops;
+ lirc_driver->min_timeout = ENE_MINGAP;
+ lirc_driver->max_timeout = ENE_MAXGAP;
+ lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
+
+ if (!lirc_driver->rbuf)
+ goto err3;
+
+ if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 512))
+ goto err4;
+
+ /* validate resources */
+ if (!pnp_port_valid(pnp_dev, 0) ||
+ pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
+ goto err5;
+
+ if (!pnp_irq_valid(pnp_dev, 0))
+ goto err5;
+
+ dev->hw_io = pnp_port_start(pnp_dev, 0);
+ dev->irq = pnp_irq(pnp_dev, 0);
+ spin_lock_init(&dev->hw_lock);
+
+ /* claim the resources */
+ error = -EBUSY;
+ if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
+ goto err5;
+
+ if (request_irq(dev->irq, ene_isr,
+ IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
+ goto err6;
+
+ /* detect hardware version and features */
+ error = ene_hw_detect(dev);
+ if (error)
+ goto err7;
+
+ ene_setup_settings(dev);
+
+ if (!dev->hw_learning_and_tx_capable && txsim) {
+ dev->hw_learning_and_tx_capable = 1;
+ setup_timer(&dev->tx_sim_timer, ene_tx_irqsim,
+ (long unsigned int)dev);
+ ene_printk(KERN_WARNING,
+ "Simulation of TX activated\n");
+ }
+
+ if (dev->hw_learning_and_tx_capable) {
+ lirc_driver->features |= LIRC_CAN_SEND_PULSE |
+ LIRC_CAN_SET_SEND_CARRIER |
+ LIRC_CAN_SET_TRANSMITTER_MASK;
+
+ if (enable_duty_carrier)
+ lirc_driver->features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
+
+ if (input == 0)
+ lirc_driver->features |= LIRC_CAN_SET_REC_CARRIER;
+
+ init_completion(&dev->tx_complete);
+ }
+
+ /* don't allow too short/long sample periods */
+ if (sample_period < 5 || sample_period > 0x7F)
+ sample_period = -1;
+
+ /* choose default sample period */
+ if (sample_period == -1) {
+
+ sample_period = 50;
+
+ /* on revB, hardware idle mode eats first sample
+ if we set too low sample period */
+ if (dev->hw_revision == ENE_HW_B && enable_idle)
+ sample_period = 75;
+ }
+
+ device_set_wakeup_capable(&pnp_dev->dev, 1);
+ device_set_wakeup_enable(&pnp_dev->dev, 1);
+
+ error = -ENODEV;
+ if (lirc_register_driver(lirc_driver))
+ goto err7;
+
+ ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
+ return 0;
+
+err7:
+ free_irq(dev->irq, dev);
+err6:
+ release_region(dev->hw_io, ENE_MAX_IO);
+err5:
+ lirc_buffer_free(lirc_driver->rbuf);
+err4:
+ kfree(lirc_driver->rbuf);
+err3:
+ kfree(lirc_driver);
+err2:
+ kfree(dev);
+err1:
+ return error;
+}
+
+/* main unload function */
+static void ene_remove(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->hw_lock, flags);
+ ene_rx_disable(dev);
+ spin_unlock_irqrestore(&dev->hw_lock, flags);
+
+ free_irq(dev->irq, dev);
+ release_region(dev->hw_io, ENE_MAX_IO);
+ lirc_unregister_driver(dev->lirc_driver->minor);
+ lirc_buffer_free(dev->lirc_driver->rbuf);
+ kfree(dev->lirc_driver);
+ kfree(dev);
+}
+
+/* enable wake on IR (wakes on specific button on original remote) */
+static void ene_enable_wake(struct ene_device *dev, int enable)
+{
+ enable = enable && device_may_wakeup(&dev->pnp_dev->dev);
+
+ ene_dbg("wake on IR %s", enable ? "enabled" : "disabled");
+
+ ene_hw_write_reg_mask(dev, ENE_FW1, enable ?
+ ENE_FW1_WAKE : 0, ENE_FW1_WAKE);
+}
+
+#ifdef CONFIG_PM
+static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+ return 0;
+}
+
+static int ene_resume(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ if (dev->in_use)
+ ene_rx_enable(dev);
+
+ ene_enable_wake(dev, 0);
+ return 0;
+}
+#endif
+
+static void ene_shutdown(struct pnp_dev *pnp_dev)
+{
+ struct ene_device *dev = pnp_get_drvdata(pnp_dev);
+ ene_enable_wake(dev, 1);
+}
+
+static const struct pnp_device_id ene_ids[] = {
+ {.id = "ENE0100",},
+ {.id = "ENE0200",},
+ {.id = "ENE0201",},
+ {},
+};
+
+static struct pnp_driver ene_driver = {
+ .name = ENE_DRIVER_NAME,
+ .id_table = ene_ids,
+ .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
+
+ .probe = ene_probe,
+ .remove = __devexit_p(ene_remove),
+#ifdef CONFIG_PM
+ .suspend = ene_suspend,
+ .resume = ene_resume,
+#endif
+ .shutdown = ene_shutdown,
+};
+
+static int __init ene_init(void)
+{
+ return pnp_register_driver(&ene_driver);
+}
+
+static void ene_exit(void)
+{
+ pnp_unregister_driver(&ene_driver);
+}
+
+module_param(sample_period, int, S_IRUGO);
+MODULE_PARM_DESC(sample_period, "Hardware sample period (50 us default)");
+
+module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(enable_idle,
+ "Enables turning off signal sampling after long inactivity time; "
+ "if disabled might help detecting input signal (default: enabled)"
+ " (KB3926B only)");
+
+module_param(input, bool, S_IRUGO);
+MODULE_PARM_DESC(input, "select which input to use "
+ "0 - auto, 1 - standard, 2 - wideband(KB3926C+)");
+
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug (debug=2 verbose debug output)");
+
+module_param(txsim, bool, S_IRUGO);
+MODULE_PARM_DESC(txsim,
+ "Simulate TX features on unsupported hardware (dangerous)");
+
+module_param(enable_duty_carrier, bool, S_IRUGO);
+MODULE_PARM_DESC(enable_duty_carrier,
+ "Enable a code that might allow to to set TX carrier duty cycle");
+
+MODULE_DEVICE_TABLE(pnp, ene_ids);
+MODULE_DESCRIPTION
+ ("LIRC driver for KB3926B/KB3926C/KB3926D "
+ "(aka ENE0100/ENE0200/ENE0201) CIR port");
+
+MODULE_AUTHOR("Maxim Levitsky");
+MODULE_LICENSE("GPL");
+
+module_init(ene_init);
+module_exit(ene_exit);
--- /dev/null
+/*
+ * driver for ENE KB3926 B/C/D CIR (also known as ENE0100/ENE0200/ENE0201)
+ *
+ * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#include <linux/spinlock.h>
+#include <media/lirc.h>
+#include <media/lirc_dev.h>
+
+/* hardware address */
+#define ENE_STATUS 0 /* hardware status - unused */
+#define ENE_ADDR_HI 1 /* hi byte of register address */
+#define ENE_ADDR_LO 2 /* low byte of register address */
+#define ENE_IO 3 /* read/write window */
+#define ENE_MAX_IO 4
+
+/* 8 bytes of samples, divided in 2 halfs*/
+#define ENE_SAMPLE_BUFFER 0xF8F0 /* regular sample buffer */
+#define ENE_SAMPLE_SPC_MASK 0x80 /* sample is space */
+#define ENE_SAMPLE_VALUE_MASK 0x7F
+#define ENE_SAMPLE_OVERFLOW 0x7F
+#define ENE_SAMPLES_SIZE 4
+
+/* fan input sample buffer */
+#define ENE_SAMPLE_BUFFER_FAN 0xF8FB /* this buffer holds high byte of */
+ /* each sample of normal buffer */
+#define ENE_FAN_SMPL_PULS_MSK 0x8000 /* this bit of combined sample */
+ /* if set, says that sample is pulse */
+#define ENE_FAN_VALUE_MASK 0x0FFF /* mask for valid bits of the value */
+
+/* first firmware register */
+#define ENE_FW1 0xF8F8
+#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
+#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
+#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
+#define ENE_FW1_IRQ 0x80 /* enable interrupt */
+
+/* second firmware register */
+#define ENE_FW2 0xF8F9
+#define ENE_FW2_BUF_HIGH 0x01 /* which half of the buffer to read */
+#define ENE_FW2_IRQ_CLR 0x04 /* clear this on IRQ */
+#define ENE_FW2_GP40_AS_LEARN 0x08 /* normal input is used as */
+ /* learning input */
+#define ENE_FW2_FAN_AS_NRML_IN 0x40 /* fan is used as normal input */
+#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
+
+/* transmitter ports */
+#define ENE_TX_PORT2 0xFC01 /* this enables one or both */
+#define ENE_TX_PORT2_EN 0x20 /* TX ports */
+#define ENE_TX_PORT1 0xFC08
+#define ENE_TX_PORT1_EN 0x02
+
+/* IRQ registers block (for revision B) */
+#define ENEB_IRQ 0xFD09 /* IRQ number */
+#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
+#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
+#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
+
+/* fan as input settings - only if learning capable */
+#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
+#define ENE_FAN_AS_IN1_EN 0xCD
+#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
+#define ENE_FAN_AS_IN2_EN 0x03
+#define ENE_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
+
+/* IRQ registers block (for revision C,D) */
+#define ENEC_IRQ 0xFE9B /* new irq settings register */
+#define ENEC_IRQ_MASK 0x0F /* irq number mask */
+#define ENEC_IRQ_UNK_EN 0x10 /* always enabled */
+#define ENEC_IRQ_STATUS 0x20 /* irq status and ACK */
+
+/* CIR block settings */
+#define ENE_CIR_CONF1 0xFEC0
+#define ENE_CIR_CONF1_TX_CLEAR 0x01 /* clear that on revC */
+ /* while transmitting */
+#define ENE_CIR_CONF1_RX_ON 0x07 /* normal reciever enabled */
+#define ENE_CIR_CONF1_LEARN1 0x08 /* enabled on learning mode */
+#define ENE_CIR_CONF1_TX_ON 0x30 /* enabled on transmit */
+#define ENE_CIR_CONF1_TX_CARR 0x80 /* send TX carrier or not */
+
+#define ENE_CIR_CONF2 0xFEC1 /* unknown setting = 0 */
+#define ENE_CIR_CONF2_LEARN2 0x10 /* set on enable learning */
+#define ENE_CIR_CONF2_GPIO40DIS 0x20 /* disable input via gpio40 */
+
+#define ENE_CIR_SAMPLE_PERIOD 0xFEC8 /* sample period in us */
+#define ENE_CIR_SAMPLE_OVERFLOW 0x80 /* interrupt on overflows if set */
+
+
+/* Two byte tx buffer */
+#define ENE_TX_INPUT1 0xFEC9
+#define ENE_TX_INPUT2 0xFECA
+#define ENE_TX_PULSE_MASK 0x80 /* Transmitted sample is pulse */
+#define ENE_TX_SMLP_MASK 0x7F
+#define ENE_TX_SMPL_PERIOD 50 /* transmit sample period - fixed */
+
+
+/* Unknown TX setting - TX sample period ??? */
+#define ENE_TX_UNK1 0xFECB /* set to 0x63 */
+
+/* Current recieved carrier period */
+#define ENE_RX_CARRIER 0xFECC /* RX period (500 ns) */
+#define ENE_RX_CARRIER_VALID 0x80 /* Register content valid */
+
+
+/* TX period (1/carrier) */
+#define ENE_TX_PERIOD 0xFECE /* TX period (500 ns) */
+#define ENE_TX_PERIOD_UNKBIT 0x80 /* This bit set on transmit*/
+#define ENE_TX_PERIOD_PULSE 0xFECF /* TX pulse period (500 ns)*/
+
+/* Hardware versions */
+#define ENE_HW_VERSION 0xFF00 /* hardware revision */
+#define ENE_HW_UNK 0xFF1D
+#define ENE_HW_UNK_CLR 0x04
+#define ENE_HW_VER_MAJOR 0xFF1E /* chip version */
+#define ENE_HW_VER_MINOR 0xFF1F
+#define ENE_HW_VER_OLD 0xFD00
+
+/* Normal/Learning carrier ranges - only valid if we have learning input*/
+/* TODO: test */
+#define ENE_NORMAL_RX_LOW 34
+#define ENE_NORMAL_RX_HI 38
+
+/* Tx carrier range */
+/* Hardware might be able to do more, but this range is enough for
+ all purposes */
+#define ENE_TX_PERIOD_MAX 32 /* corresponds to 29.4 kHz */
+#define ENE_TX_PERIOD_MIN 16 /* corrsponds to 62.5 kHz */
+
+
+
+/* Minimal and maximal gaps */
+
+/* Normal case:
+ Minimal gap is 0x7F * sample period
+ Maximum gap depends on hardware.
+ For KB3926B, it is unlimited, for newer models its around
+ 250000, after which HW stops sending samples, and that is
+ not possible to change */
+
+/* Fan case:
+ Both minimal and maximal gaps are same, and equal to 0xFFF * 0x61
+ And there is nothing to change this setting
+*/
+
+#define ENE_MAXGAP 250000
+#define ENE_MINGAP (127 * sample_period)
+
+/******************************************************************************/
+
+#define ENE_DRIVER_NAME "enecir"
+#define ENE_TXBUF_SIZE (500 * sizeof(int)) /* 500 samples (arbitary) */
+
+#define ENE_IRQ_RX 1
+#define ENE_IRQ_TX 2
+
+#define ENE_HW_B 1 /* 3926B */
+#define ENE_HW_C 2 /* 3926C */
+#define ENE_HW_D 3 /* 3926D */
+
+#define ene_printk(level, text, ...) \
+ printk(level ENE_DRIVER_NAME ": " text, ## __VA_ARGS__)
+
+#define ene_dbg(text, ...) \
+ if (debug) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+#define ene_dbg_verbose(text, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG \
+ ENE_DRIVER_NAME ": " text "\n" , ## __VA_ARGS__)
+
+
+struct ene_device {
+ struct pnp_dev *pnp_dev;
+ struct lirc_driver *lirc_driver;
+ int in_use;
+
+ /* hw IO settings */
+ unsigned long hw_io;
+ int irq;
+ spinlock_t hw_lock;
+
+ /* HW features */
+ int hw_revision; /* hardware revision */
+ int hw_learning_and_tx_capable; /* learning capable */
+ int hw_gpio40_learning; /* gpio40 is learning */
+ int hw_fan_as_normal_input; /* fan input is used as */
+ /* regular input */
+ /* HW state*/
+ int rx_pointer; /* hw pointer to rx buffer */
+ int rx_fan_input_inuse; /* is fan input in use for rx*/
+ int tx_reg; /* current reg used for TX */
+ u8 saved_conf1; /* saved FEC0 reg */
+ int learning_enabled; /* learning input enabled */
+
+ /* RX sample handling */
+ int rx_sample; /* current recieved sample */
+ int rx_sample_pulse; /* recieved sample is pulse */
+ int rx_idle; /* idle mode for RX activated */
+ struct timeval rx_gap_start; /* time of start of idle */
+ int rx_timeout; /* time in ms of RX timeout */
+ int rx_send_timeout_packet; /* do we send RX timeout */
+ int rx_timeout_sent; /* we sent the timeout packet */
+ int rx_carrier_sense; /* sense carrier */
+
+ /* TX sample handling */
+ unsigned int tx_sample; /* current sample for TX */
+ int tx_sample_pulse; /* current sample is pulse */
+
+ /* TX buffer */
+ int tx_buffer[ENE_TXBUF_SIZE]; /* input samples buffer*/
+ int tx_pos; /* position in that bufer */
+ int tx_len; /* current len of tx buffer */
+ int tx_underway; /* TX is under way*/
+ int tx_done; /* done transmitting */
+ /* one more sample pending*/
+ struct completion tx_complete; /* TX completion */
+ struct timer_list tx_sim_timer;
+
+ /*TX settings */
+ int tx_period;
+ int tx_duty_cycle;
+ int transmitter_mask;
+};
+++ /dev/null
-/*
- * driver for ENE KB3926 B/C/D CIR (also known as ENE0100)
- *
- * Copyright (C) 2009 Maxim Levitsky <maximlevitsky@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
- * USA
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pnp.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include "lirc_ene0100.h"
-
-static int sample_period = 75;
-static int enable_idle = 1;
-static int enable_learning;
-
-static void ene_set_idle(struct ene_device *dev, int idle);
-static void ene_set_inputs(struct ene_device *dev, int enable);
-
-/* read a hardware register */
-static u8 ene_hw_read_reg(struct ene_device *dev, u16 reg)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- return inb(dev->hw_io + ENE_IO);
-}
-
-/* write a hardware register */
-static void ene_hw_write_reg(struct ene_device *dev, u16 reg, u8 value)
-{
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
- outb(value, dev->hw_io + ENE_IO);
-}
-
-/* change specific bits in hardware register */
-static void ene_hw_write_reg_mask(struct ene_device *dev,
- u16 reg, u8 value, u8 mask)
-{
- u8 regvalue;
-
- outb(reg >> 8, dev->hw_io + ENE_ADDR_HI);
- outb(reg & 0xFF, dev->hw_io + ENE_ADDR_LO);
-
- regvalue = inb(dev->hw_io + ENE_IO) & ~mask;
- regvalue |= (value & mask);
- outb(regvalue, dev->hw_io + ENE_IO);
-}
-
-/* read irq status and ack it */
-static int ene_hw_irq_status(struct ene_device *dev, int *buffer_pointer)
-{
- u8 irq_status;
- u8 fw_flags1, fw_flags2;
-
- fw_flags2 = ene_hw_read_reg(dev, ENE_FW2);
-
- if (buffer_pointer)
- *buffer_pointer = 4 * (fw_flags2 & ENE_FW2_BUF_HIGH);
-
- if (dev->hw_revision < ENE_HW_C) {
- irq_status = ene_hw_read_reg(dev, ENEB_IRQ_STATUS);
-
- if (!(irq_status & ENEB_IRQ_STATUS_IR))
- return 0;
- ene_hw_write_reg(dev, ENEB_IRQ_STATUS,
- irq_status & ~ENEB_IRQ_STATUS_IR);
-
- /* rev B support only recieving */
- return ENE_IRQ_RX;
- }
-
- irq_status = ene_hw_read_reg(dev, ENEC_IRQ);
-
- if (!(irq_status & ENEC_IRQ_STATUS))
- return 0;
-
- /* original driver does that twice - a workaround ? */
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
- ene_hw_write_reg(dev, ENEC_IRQ, irq_status & ~ENEC_IRQ_STATUS);
-
- /* clear unknown flag in F8F9 */
- if (fw_flags2 & ENE_FW2_IRQ_CLR)
- ene_hw_write_reg(dev, ENE_FW2, fw_flags2 & ~ENE_FW2_IRQ_CLR);
-
- /* check if this is a TX interrupt */
- fw_flags1 = ene_hw_read_reg(dev, ENE_FW1);
-
- if (fw_flags1 & ENE_FW1_TXIRQ) {
- ene_hw_write_reg(dev, ENE_FW1, fw_flags1 & ~ENE_FW1_TXIRQ);
- return ENE_IRQ_TX;
- } else
- return ENE_IRQ_RX;
-}
-
-static int ene_hw_detect(struct ene_device *dev)
-{
- u8 chip_major, chip_minor;
- u8 hw_revision, old_ver;
- u8 tmp;
- u8 fw_capabilities;
-
- tmp = ene_hw_read_reg(dev, ENE_HW_UNK);
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp & ~ENE_HW_UNK_CLR);
-
- chip_major = ene_hw_read_reg(dev, ENE_HW_VER_MAJOR);
- chip_minor = ene_hw_read_reg(dev, ENE_HW_VER_MINOR);
-
- ene_hw_write_reg(dev, ENE_HW_UNK, tmp);
- hw_revision = ene_hw_read_reg(dev, ENE_HW_VERSION);
- old_ver = ene_hw_read_reg(dev, ENE_HW_VER_OLD);
-
- if (hw_revision == 0xFF) {
-
- ene_printk(KERN_WARNING, "device seems to be disabled\n");
- ene_printk(KERN_WARNING,
- "send a mail to lirc-list@lists.sourceforge.net\n");
- ene_printk(KERN_WARNING, "please attach output of acpidump\n");
-
- return -ENODEV;
- }
-
- if (chip_major == 0x33) {
- ene_printk(KERN_WARNING, "chips 0x33xx aren't supported yet\n");
- return -ENODEV;
- }
-
- if (chip_major == 0x39 && chip_minor == 0x26 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_C;
- ene_printk(KERN_WARNING,
- "KB3926C detected, driver support is not complete!\n");
-
- } else if (old_ver == 0x24 && hw_revision == 0xC0) {
- dev->hw_revision = ENE_HW_B;
- ene_printk(KERN_NOTICE, "KB3926B detected\n");
- } else {
- dev->hw_revision = ENE_HW_D;
- ene_printk(KERN_WARNING,
- "unknown ENE chip detected, assuming KB3926D\n");
- ene_printk(KERN_WARNING, "driver support incomplete");
-
- }
-
- ene_printk(KERN_DEBUG, "chip is 0x%02x%02x - 0x%02x, 0x%02x\n",
- chip_major, chip_minor, old_ver, hw_revision);
-
-
- /* detect features hardware supports */
-
- if (dev->hw_revision < ENE_HW_C)
- return 0;
-
- fw_capabilities = ene_hw_read_reg(dev, ENE_FW2);
-
- dev->hw_gpio40_learning = fw_capabilities & ENE_FW2_GP40_AS_LEARN;
- dev->hw_learning_and_tx_capable = fw_capabilities & ENE_FW2_LEARNING;
-
- dev->hw_fan_as_normal_input = dev->hw_learning_and_tx_capable &&
- fw_capabilities & ENE_FW2_FAN_AS_NRML_IN;
-
- ene_printk(KERN_NOTICE, "hardware features:\n");
- ene_printk(KERN_NOTICE,
- "learning and tx %s, gpio40_learn %s, fan_in %s\n",
- dev->hw_learning_and_tx_capable ? "on" : "off",
- dev->hw_gpio40_learning ? "on" : "off",
- dev->hw_fan_as_normal_input ? "on" : "off");
-
- if (!dev->hw_learning_and_tx_capable && enable_learning)
- enable_learning = 0;
-
- if (dev->hw_learning_and_tx_capable) {
- ene_printk(KERN_WARNING,
- "Device supports transmitting, but the driver doesn't\n");
- ene_printk(KERN_WARNING,
- "due to lack of hardware to test against.\n");
- ene_printk(KERN_WARNING,
- "Send a mail to: lirc-list@lists.sourceforge.net\n");
- }
- return 0;
-}
-
-/* hardware initialization */
-static int ene_hw_init(void *data)
-{
- u8 reg_value;
- struct ene_device *dev = (struct ene_device *)data;
- dev->in_use = 1;
-
- if (dev->hw_revision < ENE_HW_C) {
- ene_hw_write_reg(dev, ENEB_IRQ, dev->irq << 1);
- ene_hw_write_reg(dev, ENEB_IRQ_UNK1, 0x01);
- } else {
- reg_value = ene_hw_read_reg(dev, ENEC_IRQ) & 0xF0;
- reg_value |= ENEC_IRQ_UNK_EN;
- reg_value &= ~ENEC_IRQ_STATUS;
- reg_value |= (dev->irq & ENEC_IRQ_MASK);
- ene_hw_write_reg(dev, ENEC_IRQ, reg_value);
- ene_hw_write_reg(dev, ENE_TX_UNK1, 0x63);
- }
-
- ene_hw_write_reg(dev, ENE_CIR_CONF2, 0x00);
- ene_set_inputs(dev, enable_learning);
-
- /* set sampling period */
- ene_hw_write_reg(dev, ENE_CIR_SAMPLE_PERIOD, sample_period);
-
- /* ack any pending irqs - just in case */
- ene_hw_irq_status(dev, NULL);
-
- /* enter idle mode */
- ene_set_idle(dev, 1);
-
- /* enable firmware bits */
- ene_hw_write_reg_mask(dev, ENE_FW1,
- ENE_FW1_ENABLE | ENE_FW1_IRQ,
- ENE_FW1_ENABLE | ENE_FW1_IRQ);
- /* clear stats */
- dev->sample = 0;
- return 0;
-}
-
-/* this enables gpio40 signal, used if connected to wide band input*/
-static void ene_enable_gpio40(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, enable ?
- 0 : ENE_CIR_CONF2_GPIO40DIS,
- ENE_CIR_CONF2_GPIO40DIS);
-}
-
-/* this enables the classic sampler */
-static void ene_enable_normal_recieve(struct ene_device *dev, int enable)
-{
- ene_hw_write_reg(dev, ENE_CIR_CONF1, enable ? ENE_CIR_CONF1_ADC_ON : 0);
-}
-
-/* this enables recieve via fan input */
-static void ene_enable_fan_recieve(struct ene_device *dev, int enable)
-{
- if (!enable)
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, 0);
- else {
- ene_hw_write_reg(dev, ENE_FAN_AS_IN1, ENE_FAN_AS_IN1_EN);
- ene_hw_write_reg(dev, ENE_FAN_AS_IN2, ENE_FAN_AS_IN2_EN);
- }
- dev->fan_input_inuse = enable;
-}
-
-/* determine which input to use*/
-static void ene_set_inputs(struct ene_device *dev, int learning_enable)
-{
- ene_enable_normal_recieve(dev, 1);
-
- /* old hardware doesn't support learning mode for sure */
- if (dev->hw_revision <= ENE_HW_B)
- return;
-
- /* reciever not learning capable, still set gpio40 correctly */
- if (!dev->hw_learning_and_tx_capable) {
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- return;
- }
-
- /* enable learning mode */
- if (learning_enable) {
- ene_enable_gpio40(dev, dev->hw_gpio40_learning);
-
- /* fan input is not used for learning */
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable learning mode */
- } else {
- if (dev->hw_fan_as_normal_input) {
- ene_enable_fan_recieve(dev, 1);
- ene_enable_normal_recieve(dev, 0);
- } else
- ene_enable_gpio40(dev, !dev->hw_gpio40_learning);
- }
-
- /* set few additional settings for this mode */
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF1, learning_enable ?
- ENE_CIR_CONF1_LEARN1 : 0, ENE_CIR_CONF1_LEARN1);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_CONF2, learning_enable ?
- ENE_CIR_CONF2_LEARN2 : 0, ENE_CIR_CONF2_LEARN2);
-}
-
-/* deinitialization */
-static void ene_hw_deinit(void *data)
-{
- struct ene_device *dev = (struct ene_device *)data;
-
- /* disable samplers */
- ene_enable_normal_recieve(dev, 0);
-
- if (dev->hw_fan_as_normal_input)
- ene_enable_fan_recieve(dev, 0);
-
- /* disable hardware IRQ and firmware flag */
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_ENABLE | ENE_FW1_IRQ);
-
- ene_set_idle(dev, 1);
- dev->in_use = 0;
-}
-
-/* sends current sample to userspace */
-static void send_sample(struct ene_device *dev)
-{
- int value = abs(dev->sample) & PULSE_MASK;
-
- if (dev->sample > 0)
- value |= PULSE_BIT;
-
- if (!lirc_buffer_full(dev->lirc_driver->rbuf)) {
- lirc_buffer_write(dev->lirc_driver->rbuf, (void *)&value);
- wake_up(&dev->lirc_driver->rbuf->wait_poll);
- }
- dev->sample = 0;
-}
-
-/* this updates current sample */
-static void update_sample(struct ene_device *dev, int sample)
-{
- if (!dev->sample)
- dev->sample = sample;
- else if (same_sign(dev->sample, sample))
- dev->sample += sample;
- else {
- send_sample(dev);
- dev->sample = sample;
- }
-}
-
-/* enable or disable idle mode */
-static void ene_set_idle(struct ene_device *dev, int idle)
-{
- struct timeval now;
- int disable = idle && enable_idle && (dev->hw_revision < ENE_HW_C);
-
- ene_hw_write_reg_mask(dev, ENE_CIR_SAMPLE_PERIOD,
- disable ? 0 : ENE_CIR_SAMPLE_OVERFLOW,
- ENE_CIR_SAMPLE_OVERFLOW);
- dev->idle = idle;
-
- /* remember when we have entered the idle mode */
- if (idle) {
- do_gettimeofday(&dev->gap_start);
- return;
- }
-
- /* send the gap between keypresses now */
- do_gettimeofday(&now);
-
- if (now.tv_sec - dev->gap_start.tv_sec > 16)
- dev->sample = space(PULSE_MASK);
- else
- dev->sample = dev->sample +
- space(1000000ull * (now.tv_sec - dev->gap_start.tv_sec))
- + space(now.tv_usec - dev->gap_start.tv_usec);
-
- if (abs(dev->sample) > PULSE_MASK)
- dev->sample = space(PULSE_MASK);
- send_sample(dev);
-}
-
-/* interrupt handler */
-static irqreturn_t ene_hw_irq(int irq, void *data)
-{
- u16 hw_value;
- int i, hw_sample;
- int space;
- int buffer_pointer;
- int irq_status;
-
- struct ene_device *dev = (struct ene_device *)data;
- irq_status = ene_hw_irq_status(dev, &buffer_pointer);
-
- if (!irq_status)
- return IRQ_NONE;
-
- /* TODO: only RX for now */
- if (irq_status == ENE_IRQ_TX)
- return IRQ_HANDLED;
-
- for (i = 0; i < ENE_SAMPLES_SIZE; i++) {
-
- hw_value = ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER + buffer_pointer + i);
-
- if (dev->fan_input_inuse) {
- /* read high part of the sample */
- hw_value |= ene_hw_read_reg(dev,
- ENE_SAMPLE_BUFFER_FAN + buffer_pointer + i) << 8;
-
- /* test for _space_ bit */
- space = !(hw_value & ENE_FAN_SMPL_PULS_MSK);
-
- /* clear space bit, and other unused bits */
- hw_value &= ENE_FAN_VALUE_MASK;
- hw_sample = hw_value * ENE_SAMPLE_PERIOD_FAN;
-
- } else {
- space = hw_value & ENE_SAMPLE_SPC_MASK;
- hw_value &= ENE_SAMPLE_VALUE_MASK;
- hw_sample = hw_value * sample_period;
- }
-
- /* no more data */
- if (!(hw_value))
- break;
-
- if (space)
- hw_sample *= -1;
-
- /* overflow sample recieved, handle it */
-
- if (!dev->fan_input_inuse && hw_value == ENE_SAMPLE_OVERFLOW) {
-
- if (dev->idle)
- continue;
-
- if (dev->sample > 0 || abs(dev->sample) <= ENE_MAXGAP)
- update_sample(dev, hw_sample);
- else
- ene_set_idle(dev, 1);
-
- continue;
- }
-
- /* normal first sample recieved */
- if (!dev->fan_input_inuse && dev->idle) {
- ene_set_idle(dev, 0);
-
- /* discard first recieved value, its random
- since its the time signal was off before
- first pulse if idle mode is enabled, HW
- does that for us */
-
- if (!enable_idle)
- continue;
- }
- update_sample(dev, hw_sample);
- send_sample(dev);
- }
- return IRQ_HANDLED;
-}
-
-static int ene_probe(struct pnp_dev *pnp_dev,
- const struct pnp_device_id *dev_id)
-{
- struct ene_device *dev;
- struct lirc_driver *lirc_driver;
- int error = -ENOMEM;
-
- dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
- if (!dev)
- goto err1;
-
- dev->pnp_dev = pnp_dev;
- pnp_set_drvdata(pnp_dev, dev);
-
-
- /* prepare lirc interface */
- error = -ENOMEM;
- lirc_driver = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL);
-
- if (!lirc_driver)
- goto err2;
-
- dev->lirc_driver = lirc_driver;
-
- strcpy(lirc_driver->name, ENE_DRIVER_NAME);
- lirc_driver->minor = -1;
- lirc_driver->code_length = sizeof(int) * 8;
- lirc_driver->features = LIRC_CAN_REC_MODE2;
- lirc_driver->data = dev;
- lirc_driver->set_use_inc = ene_hw_init;
- lirc_driver->set_use_dec = ene_hw_deinit;
- lirc_driver->dev = &pnp_dev->dev;
- lirc_driver->owner = THIS_MODULE;
-
- lirc_driver->rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL);
-
- if (!lirc_driver->rbuf)
- goto err3;
-
- if (lirc_buffer_init(lirc_driver->rbuf, sizeof(int), sizeof(int) * 256))
- goto err4;
-
- error = -ENODEV;
- if (lirc_register_driver(lirc_driver))
- goto err5;
-
- /* validate resources */
- if (!pnp_port_valid(pnp_dev, 0) ||
- pnp_port_len(pnp_dev, 0) < ENE_MAX_IO)
- goto err6;
-
- if (!pnp_irq_valid(pnp_dev, 0))
- goto err6;
-
- dev->hw_io = pnp_port_start(pnp_dev, 0);
- dev->irq = pnp_irq(pnp_dev, 0);
-
- /* claim the resources */
- error = -EBUSY;
- if (!request_region(dev->hw_io, ENE_MAX_IO, ENE_DRIVER_NAME))
- goto err6;
-
- if (request_irq(dev->irq, ene_hw_irq,
- IRQF_SHARED, ENE_DRIVER_NAME, (void *)dev))
- goto err7;
-
- /* detect hardware version and features */
- error = ene_hw_detect(dev);
- if (error)
- goto err8;
-
- ene_printk(KERN_NOTICE, "driver has been succesfully loaded\n");
- return 0;
-
-err8:
- free_irq(dev->irq, dev);
-err7:
- release_region(dev->hw_io, ENE_MAX_IO);
-err6:
- lirc_unregister_driver(lirc_driver->minor);
-err5:
- lirc_buffer_free(lirc_driver->rbuf);
-err4:
- kfree(lirc_driver->rbuf);
-err3:
- kfree(lirc_driver);
-err2:
- kfree(dev);
-err1:
- return error;
-}
-
-static void ene_remove(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_deinit(dev);
- free_irq(dev->irq, dev);
- release_region(dev->hw_io, ENE_MAX_IO);
- lirc_unregister_driver(dev->lirc_driver->minor);
- lirc_buffer_free(dev->lirc_driver->rbuf);
- kfree(dev->lirc_driver);
- kfree(dev);
-}
-
-#ifdef CONFIG_PM
-
-/* TODO: make 'wake on IR' configurable and add .shutdown */
-/* currently impossible due to lack of kernel support */
-
-static int ene_suspend(struct pnp_dev *pnp_dev, pm_message_t state)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- ene_hw_write_reg_mask(dev, ENE_FW1, ENE_FW1_WAKE, ENE_FW1_WAKE);
- return 0;
-}
-
-static int ene_resume(struct pnp_dev *pnp_dev)
-{
- struct ene_device *dev = pnp_get_drvdata(pnp_dev);
- if (dev->in_use)
- ene_hw_init(dev);
-
- ene_hw_write_reg_mask(dev, ENE_FW1, 0, ENE_FW1_WAKE);
- return 0;
-}
-
-#endif
-
-static const struct pnp_device_id ene_ids[] = {
- {.id = "ENE0100",},
- {},
-};
-
-static struct pnp_driver ene_driver = {
- .name = ENE_DRIVER_NAME,
- .id_table = ene_ids,
- .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
-
- .probe = ene_probe,
- .remove = __devexit_p(ene_remove),
-
-#ifdef CONFIG_PM
- .suspend = ene_suspend,
- .resume = ene_resume,
-#endif
-};
-
-static int __init ene_init(void)
-{
- if (sample_period < 5) {
- ene_printk(KERN_ERR, "sample period must be at\n");
- ene_printk(KERN_ERR, "least 5 us, (at least 30 recommended)\n");
- return -EINVAL;
- }
- return pnp_register_driver(&ene_driver);
-}
-
-static void ene_exit(void)
-{
- pnp_unregister_driver(&ene_driver);
-}
-
-module_param(sample_period, int, S_IRUGO);
-MODULE_PARM_DESC(sample_period, "Hardware sample period (75 us default)");
-
-module_param(enable_idle, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(enable_idle,
- "Enables turning off signal sampling after long inactivity time; "
- "if disabled might help detecting input signal (default: enabled)");
-
-module_param(enable_learning, bool, S_IRUGO);
-MODULE_PARM_DESC(enable_learning, "Use wide band (learning) reciever");
-
-MODULE_DEVICE_TABLE(pnp, ene_ids);
-MODULE_DESCRIPTION
- ("LIRC driver for KB3926B/KB3926C/KB3926D (aka ENE0100) CIR port");
-MODULE_AUTHOR("Maxim Levitsky");
-MODULE_LICENSE("GPL");
-
-module_init(ene_init);
-module_exit(ene_exit);
projects / mv-sheeva.git / commitdiff