--- /dev/null
+/*
+ * Driver for the Conexant CX23885/7/8 PCIe bridge
+ *
+ * Infrared remote control input device
+ *
+ * Most of this file is
+ *
+ * Copyright (C) 2009 Andy Walls <awalls@radix.net>
+ *
+ * However, the cx23885_input_{init,fini} functions contained herein are
+ * derived from Linux kernel files linux/media/video/.../...-input.c marked as:
+ *
+ * Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
+ * Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
+ * Markus Rechberger <mrechberger@gmail.com>
+ * Mauro Carvalho Chehab <mchehab@infradead.org>
+ * Sascha Sommer <saschasommer@freenet.de>
+ * Copyright (C) 2004, 2005 Chris Pascoe
+ * Copyright (C) 2003, 2004 Gerd Knorr
+ * Copyright (C) 2003 Pavel Machek
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/input.h>
+#include <media/ir-common.h>
+#include <media/v4l2-subdev.h>
+
+#include "cx23885.h"
+
+#define RC5_BITS 14
+#define RC5_HALF_BITS (2*RC5_BITS)
+#define RC5_HALF_BITS_MASK ((1 << RC5_HALF_BITS) - 1)
+
+#define RC5_START_BITS_NORMAL 0x3 /* Command range 0 - 63 */
+#define RC5_START_BITS_EXTENDED 0x2 /* Command range 64 - 127 */
+
+#define RC5_EXTENDED_COMMAND_OFFSET 64
+
+static inline unsigned int rc5_command(u32 rc5_baseband)
+{
+ return RC5_INSTR(rc5_baseband) +
+ ((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
+ ? RC5_EXTENDED_COMMAND_OFFSET : 0);
+}
+
+static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ unsigned int code, command;
+ u32 rc5;
+
+ /* Ignore codes that are too short to be valid RC-5 */
+ if (ir_input->last_bit < (RC5_HALF_BITS - 1))
+ return;
+
+ /* The library has the manchester coding backwards; XOR to adapt. */
+ code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
+ rc5 = ir_rc5_decode(code);
+
+ switch (RC5_START(rc5)) {
+ case RC5_START_BITS_NORMAL:
+ break;
+ case RC5_START_BITS_EXTENDED:
+ /* Don't allow if the remote only emits standard commands */
+ if (ir_input->start == RC5_START_BITS_NORMAL)
+ return;
+ break;
+ default:
+ return;
+ }
+
+ if (ir_input->addr != RC5_ADDR(rc5))
+ return;
+
+ /* Don't generate a keypress for RC-5 auto-repeated keypresses */
+ command = rc5_command(rc5);
+ if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) ||
+ command != rc5_command(ir_input->last_rc5) ||
+ /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
+ RC5_START(ir_input->last_rc5) == 0) {
+ /* This keypress is differnet: not an auto repeat */
+ ir_input_nokey(ir_input->dev, &ir_input->ir);
+ ir_input_keydown(ir_input->dev, &ir_input->ir,
+ command, ir_input->code);
+ }
+ ir_input->last_rc5 = rc5;
+
+ /* Schedule when we should do the key up event: ir_input_nokey() */
+ mod_timer(&ir_input->timer_keyup,
+ jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
+}
+
+static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
+ u32 ns_pulse)
+{
+ const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
+ struct card_ir *ir_input = dev->ir_input;
+ int i, level, quarterbits, halfbits;
+
+ if (!ir_input->active) {
+ ir_input->active = 1;
+ /* assume an initial space that we may not detect or measure */
+ ir_input->code = 0;
+ ir_input->last_bit = 0;
+ }
+
+ if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
+ ir_input->last_bit++; /* Account for the final space */
+ ir_input->active = 0;
+ cx23885_input_process_raw_rc5(dev);
+ return;
+ }
+
+ level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;
+
+ /* Skip any leading space to sync to the start bit */
+ if (ir_input->last_bit == 0 && level == 0)
+ return;
+
+ /*
+ * With valid RC-5 we can get up to two consecutive half-bits in a
+ * single pulse measurment. Experiments have shown that the duration
+ * of a half-bit can vary. Make sure we always end up with an even
+ * number of quarter bits at the same level (mark or space).
+ */
+ ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
+ quarterbits = ns_pulse / rc5_quarterbit_ns;
+ if (quarterbits & 1)
+ quarterbits++;
+ halfbits = quarterbits / 2;
+
+ for (i = 0; i < halfbits; i++) {
+ ir_input->last_bit++;
+ ir_input->code |= (level << ir_input->last_bit);
+
+ if (ir_input->last_bit >= RC5_HALF_BITS-1) {
+ ir_input->active = 0;
+ cx23885_input_process_raw_rc5(dev);
+ /*
+ * If level is 1, a leading mark is invalid for RC5.
+ * If level is 0, we scan past extra intial space.
+ * Either way we don't want to reactivate collecting
+ * marks or spaces here with any left over half-bits.
+ */
+ break;
+ }
+ }
+}
+
+static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
+ bool add_eom)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct ir_input_state *ir_input_state = &ir_input->ir;
+
+ u32 ns_pulse[RC5_HALF_BITS+1];
+ ssize_t num = 0;
+ int count, i;
+
+ do {
+ v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
+ sizeof(ns_pulse), &num);
+
+ count = num / sizeof(u32);
+
+ /* Append an end of Rx seq, if the caller requested */
+ if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
+ ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
+ count++;
+ }
+
+ /* Just drain the Rx FIFO, if we're called, but not RC-5 */
+ if (ir_input_state->ir_type != IR_TYPE_RC5)
+ continue;
+
+ for (i = 0; i < count; i++)
+ cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
+ } while (num != 0);
+}
+
+void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
+{
+ struct v4l2_subdev_ir_parameters params;
+ int overrun, data_available;
+
+ if (dev->sd_ir == NULL || events == 0)
+ return;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ /*
+ * The only board we handle right now. However other boards
+ * using the CX2388x integrated IR controller should be similar
+ */
+ break;
+ default:
+ return;
+ }
+
+ overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
+ V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);
+
+ data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
+ V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);
+
+ if (overrun) {
+ /* If there was a FIFO overrun, stop the device */
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ params.enable = false;
+ /* Mitigate race with cx23885_input_ir_stop() */
+ params.shutdown = atomic_read(&dev->ir_input_stopping);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ }
+
+ if (data_available)
+ cx23885_input_process_pulse_widths_rc5(dev, overrun);
+
+ if (overrun) {
+ /* If there was a FIFO overrun, clear & restart the device */
+ params.enable = true;
+ /* Mitigate race with cx23885_input_ir_stop() */
+ params.shutdown = atomic_read(&dev->ir_input_stopping);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ }
+}
+
+static void cx23885_input_ir_start(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct ir_input_state *ir_input_state = &ir_input->ir;
+ struct v4l2_subdev_ir_parameters params;
+
+ if (dev->sd_ir == NULL)
+ return;
+
+ atomic_set(&dev->ir_input_stopping, 0);
+
+ /* keyup timer set up, if needed */
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ setup_timer(&ir_input->timer_keyup,
+ ir_rc5_timer_keyup, /* Not actually RC-5 specific */
+ (unsigned long) ir_input);
+ if (ir_input_state->ir_type == IR_TYPE_RC5) {
+ /*
+ * RC-5 repeats a held key every
+ * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
+ */
+ ir_input->rc5_key_timeout = 115;
+ }
+ break;
+ }
+
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ /*
+ * The IR controller on this board only returns pulse widths.
+ * Any other mode setting will fail to set up the device.
+ */
+ params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
+ params.enable = true;
+ params.interrupt_enable = true;
+ params.shutdown = false;
+
+ /* Setup for baseband compatible with both RC-5 and RC-6A */
+ params.modulation = false;
+ /* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
+ /* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
+ params.max_pulse_width = 3333333; /* ns */
+ /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
+ /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
+ params.noise_filter_min_width = 333333; /* ns */
+ /*
+ * This board has inverted receive sense:
+ * mark is received as low logic level;
+ * falling edges are detected as rising edges; etc.
+ */
+ params.invert = true;
+ break;
+ }
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+}
+
+static void cx23885_input_ir_stop(struct cx23885_dev *dev)
+{
+ struct card_ir *ir_input = dev->ir_input;
+ struct v4l2_subdev_ir_parameters params;
+
+ if (dev->sd_ir == NULL)
+ return;
+
+ /*
+ * Stop the sd_ir subdevice from generating notifications and
+ * scheduling work.
+ * It is shutdown this way in order to mitigate a race with
+ * cx23885_input_rx_work_handler() in the overrun case, which could
+ * re-enable the subdevice.
+ */
+ atomic_set(&dev->ir_input_stopping, 1);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ while (params.shutdown == false) {
+ params.enable = false;
+ params.interrupt_enable = false;
+ params.shutdown = true;
+ v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms);
+ v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms);
+ }
+
+ flush_scheduled_work();
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ del_timer_sync(&ir_input->timer_keyup);
+ break;
+ }
+}
+
+int cx23885_input_init(struct cx23885_dev *dev)
+{
+ struct card_ir *ir;
+ struct input_dev *input_dev;
+ struct ir_scancode_table *ir_codes = NULL;
+ int ir_type, ir_addr, ir_start;
+ int ret;
+
+ /*
+ * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
+ * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
+ */
+ if (dev->sd_ir == NULL)
+ return -ENODEV;
+
+ switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1850:
+ /* Parameters for the grey Hauppauge remote for the HVR-1850 */
+ ir_codes = &ir_codes_hauppauge_new_table;
+ ir_type = IR_TYPE_RC5;
+ ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
+ ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
+ break;
+ }
+ if (ir_codes == NULL)
+ return -ENODEV;
+
+ ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ir || !input_dev) {
+ ret = -ENOMEM;
+ goto err_out_free;
+ }
+
+ ir->dev = input_dev;
+ ir->addr = ir_addr;
+ ir->start = ir_start;
+
+ /* init input device */
+ snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)",
+ cx23885_boards[dev->board].name);
+ snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci));
+
+ ir_input_init(input_dev, &ir->ir, ir_type, ir_codes);
+ input_dev->name = ir->name;
+ input_dev->phys = ir->phys;
+ input_dev->id.bustype = BUS_PCI;
+ input_dev->id.version = 1;
+ if (dev->pci->subsystem_vendor) {
+ input_dev->id.vendor = dev->pci->subsystem_vendor;
+ input_dev->id.product = dev->pci->subsystem_device;
+ } else {
+ input_dev->id.vendor = dev->pci->vendor;
+ input_dev->id.product = dev->pci->device;
+ }
+ input_dev->dev.parent = &dev->pci->dev;
+
+ dev->ir_input = ir;
+ cx23885_input_ir_start(dev);
+
+ ret = input_register_device(ir->dev);
+ if (ret)
+ goto err_out_stop;
+
+ return 0;
+
+err_out_stop:
+ cx23885_input_ir_stop(dev);
+ dev->ir_input = NULL;
+err_out_free:
+ input_free_device(input_dev);
+ kfree(ir);
+ return ret;
+}
+
+void cx23885_input_fini(struct cx23885_dev *dev)
+{
+ /* Always stop the IR hardware from generating interrupts */
+ cx23885_input_ir_stop(dev);
+
+ if (dev->ir_input == NULL)
+ return;
+ input_unregister_device(dev->ir_input->dev);
+ kfree(dev->ir_input);
+ dev->ir_input = NULL;
+}
projects / mv-sheeva.git / commitdiff